Program and useful informa on - med-space.org · Filippo De Angelis, University of Perugia (Italy)...

Dec. 05-08, 2018 Rabat, Morocco

6th International Renewable and Sustainable Energy Conference

MSTIMediterranean Space of Technology and Innovation

www.med-space.org Strategic Partner

Platinum PartnerKingdom of MoroccoMinistry of Energy, Mines, and

Sustainable Development

Under the Aegis of

CLUSTER SOLAIRE

Program and useful informa�on

2018 6th International Renewable and Sustainable Energy Conference - IEEE Conference – Program and useful info.

General Chairs Mohamed Essaaidi, Director of the National Higher School of IT (ENSIAS), Rabat, Morocco

Youssef Zaz, President of MSTI & Asso. Prof., Faculty of Science, Abdelmalek Essaadi University, Tetouan, Morocco

TPC Chair Ahmed Ennaoui, President of the scientific council of IRESEN

TPC members Shahzada Ahmad, BCMaterials (Spain) Abdelkader Aissat, University of Blida (Algeria) Bulent Akinoglu, Middle East Technical University (Turkey) Khalil Amine, Argone National Lab (USA) Ahmad Atieh, University of Jordan (Jordan) Ahmad Taher Azar, Benha University (Egypt) Chitti Babu, University of Nottingham (U.K) Malaysia Campus (Malaysia) Mohamed Bakhouya, International University of Rabat (Morocco) Saad Baradyi, iproplan Planungsgesellschaft mbH (Germany) Abdelfettah Barhdadi, ENS, Med V University in Rabat (Morocco) Rachid Benchrifa, Faculty of Science, Rabat (Morocco) Driss Benhaddou, University of Houston (USA) Brahim Benhamou, Cadi Ayyad University, Marrakech (Morocco) Abdelilah Benyoussef, MAScIR (Morocco) Badre Bossoufi, EST-Oujda (Morocco) Mongi Bouaicha, CRTEn (Tunisia) Jamila Boudaden, Fraunhofer (Germany) Othmane Bouhali, Texas A&M University (Qatar) Ahmed Boutejdar, German Research Foundation DFG (Germany) Emilio Bunel, Sociedad Química y Minera (SQL) (Chile) Dany Carlier, University of Bordeaux (France) Maher Chaabene, University of Sfax (Tunisia) Tarik Chafik, FST Tangier (Morocco) Adil Chergui, Faculty of Science, Tetouan (Morocco) Naouel Daouas, Ecole Nationale d'Ingénieurs de Monastir (Tunisia) Filippo De Angelis, University of Perugia (Italy) Frank Domoney, University of Essex (UK) Azeddine Draou, University of Hail (Saudi Arabia) Ahmed El Hajjaji, Picardie Jules Verne University (France) Soumia El Hani, Mohammed V University- Rabat (Morocco) Khalid El harrouni, National School of Architecture, Rabat (Morocco) Abdelaaziz El Hibaoui, FS Tetouan y (Morocco) Salima El Makhtari, ENSAT (Morocco) Otman El Mrabet, Abdelmalek Essaadi University (Morocco) Tarek El-Ghazawi, The George Washington University (USA) Youssef Errami, Faculty of Science, Eljadida (Morocco) Ahmed Essadki, ENSET (Morocco) Vladimir Falko, National Graphene Institute, Manchester (UK) Joao A. Farinha Mendes, Unidadede Energia Solar (Portugal) El Mostafa Feddi, ENSET, Rabat (Morocco) Adelino Ferreira, University of Coimbra (Portugal) Benjamin Figgis, QEERI (Qatar) Bruno Francois, Ecole Centrale de Lille (France) Jaafar Gaber, University of Technology of Belfort Montbéliard (France) Mohammed Garoum, EST, Mohammed V University in Rabat (Morocco) Salif Gay, Université de Thiès (Senegal) Grancini Giulia, Ecole Polytechnique Fédérale de Lausanne (Switzerland) Hao Gong, National University of Singapore (Singapore) Ivan Gordon, Silicon PV group, imec (Belgium) Yogi Goswami, University of South Florida (USA) Oliver Groning, Empa Materials Science and Technology (Switzerland) Thomas Hannappel, Ilmenau University of Technology (Germany) Peter Heller, DLR (Germany) Mohamed Henini, Nottingham University (UK) Andreas Hintennach, Mercedes-Benz (Germany) El Kebir Hlil, University of Joseph Fourier, Grenoble (France) Ahmed Ihlal, University Ibn Zohr (Morocco) Arnulf Jaeger-Waldau, European Commission (Italy)

Isam Janajreh, Masdar Institute of Science (United Arab Emirates) Yaser Jararweh, Jordan University of Science and Technology (Jordan) Mustapha Jouiad, Masdar Institute of Science and Technology (UAE) Abdelkader Kara, University of Central Florida (USA) Nachida Kasbadji Merzouk, UDES - CDER (Algeria) Asmae Khaldoun, Al Akhawayn University (Morocco) Maatouk Khoukhi, Sultan Qaboos University, Muscat (Oman) Marwan Khraisheh, Masdar Institute of Science (UAE) Shinichi Komaba, Tokyo University of Science (Japan) Abdellah Kouzou, University of Djelfa (Algeria) Moncef Krarti, Colorado University (USA) Najma Laaroussi, EST, Mohammed V University in Rabat (Morocco) Salah Laghrouche, UBTM (France) Josip Lorincz, University of Split (Croatia) Giorgio Mannina, UNIPA (Italy) Diego Martinez Plaza, CIEMAT (Spain) Joao Martins, Universidade NOVA de Lisboa (Portugal) Dieter Meissner, Tallinn University of Technology (Estonia) Takashi Minemoto, Ritsumeikan University (Japan) Tohru Miyake, Miraikikai, inc. (Japan) Saad Motahhir, usmba (Morocco) Omar Mounkachi, Faculty of Science, Rabat (Morocco) Tokio Nakada, Aoyama Gakuin University (Japan) Khaja Nazeeruddin, Ecole Polytech. Federale de Lausanne (Switzerland) Hadi Nur, UTM Skudai, Johor (Malaysia) Mohamed Ouassaid, EMI, Med V University in Rabat (Morocco) Hamid Oughaddou, Institut des Sciences Moléculaires d’Orsay (France) Mari-Louise Persson, University of Oslo (Norway) Djamila Rekioua, University of Bejaia (Algeria) Jochen Rentsch, Fraunhofer (Germany) Benoit Robyns, HEI - Lille (France) Teofilo Rojo, CIC energiGUNE (Spain) Rachid Saadane, LETI, EHTP (Morocco) Ismael Saadoune, FST, Cadi Ayyad University, Marrakech (Morocco) Luis Martinez Salmero, University of Rovira i Virgili (Spain) Mat Santamouris, University of Athens (Greece) Edgardo Saucedo, Catalonian Institute for Energy Res. (IREC) (Spain) Rutger Schlatmann, PVcomB (Germany) Susan Schorr, HZB (Germany) Ari Paavo Seitsonen, École Normale Supérieure, Paris (France) Lee Seung Joo, Dongguk University (Korea) Vinod Kumar Sharma, ENEA (Italy) Abdelilah Slaoui, ICUBE/ CNRS-University of Strasbourg (France) Greg P. Smestad, Solideas, San Jose (USA) Abdelhafed Taleb, Chimie-Paristech (France) Mohammed Tarbouchi, Royale military College (Canada) Ayodhya Nath Tiwari, EMPA-Swiss Federal Lab (Switzerland) Teodor Todorov, IBM (USA) Abdelmounaim Tounzi, Université Lille 1, IUT A, Lille (France) Askar Triwiyanto, Universitas Siswa Bangsa Internasional (Indonesia) Rasit Turan, GUNAM (Turkey) Ruxandra Vidu, University of California, USA Jud Virden, PNNL (USA) Margret Wohlfahrt-Mehrens, ZSW, Ulm (Germany) Rachid Yazami, Nanyang Technological University (Singapore) Karim Zaghib, Hydro-Quebec (Canada) Ahmad Zahedi, James Cook University (Australia) Eduardo Zarza Moya, CIEMAT-PSA (Spain)

3


Themes – Workshops

Session topics

S-I-PV Solar Energy - PV

Workshop 1 2D Materials

Challenges and opportunities in the electronic properties of two-dimensional materials: when theory meets experiment

Workshop 2 Perovskites

Excitonic Solar Cells: perovskites, organic and dye-sensitized solar cells

Workshop 4 Ternary & multinary comp.

Ternary and multinary compounds: Structure, Devices, Simulation and modeling

S-I-Th Solar Energy - Thermal

S-II Wind Energy

S-III

Green technology

Energy efficiency

Biomass

Workshop 3 Ene. Effi. In Building

Energy Efficiency in Buildings workshop

S-IV Command and control systems for RE

Simulation and Modelling for RE

S-V

Energy storage and Batteries

Energy harvesting

Hydrogen energy storage

Workshop 5 Li-ion

Future Battery for e-Mobility & Stationary Storage Applications: Lithium-ion Technology and Beyond

Workshop 6 Smart Grid

Microgrids - the building block of a smart grid

4


IRSE

C'1

8 A

dva

nce

d P

rogr

am

5


Opening Ceremony

Wednesday December 05, 2018

09:15-10:00 Plenary Room

Chair: Mohamed Essaaidi, IRSEC’18 General co-Chair

Aziz Rabbah, Minister of Energy, Mines and Sustainable Development, Kingdom of Morocco Mustapha Bakkoury, President of MASEN Philippe Simonis, Director at GIZ Ahmed Ennaoui, IRSEC’18 TPC Chair Youssef Zaz, IRSEC’18 General co-Chair

Program of all Keynote talks

6


Plenary Talks

Chairs: Khalil Amine, Argonne National Laboratory, IL, USA. Hicham Bouzekri, Moroccan Agency for Sustainable Energy, Morocco. Ahmed Ennaoui, Institut de Recherche en Energie Solaire et Energies Nouvelles, Morocco.

KN01 Wednesday 10:00-10:30

Plenary Room

Safe and Highly Conductive Electrolytes: From Liquid to Solid By Prof. Andreas Hintennach Daimler AG, Mercedes-Benz, Group Research, Germany.


Plenary Room

Prof. Mohammad Khaja Nazeeruddin, Ecole Polytechnique Federale de Lausanne, Switzerland


Plenary Room

Towards the ultimate Silicon solar cell and module By Dr. Ivan Gordon Silicon PV group, imec, Belgium.


Plenary Room

Support for innovation from the Local Government: the example of “Valencian cities network for innovation” By Mr. Jose Benlloch Fernandez Mayor of Vila-real City, Spain.


Plenary Room

New 2D materials: silicene and phosphorene By Prof. Hamid Oughaddou Institut des Sciences Moléculaires d’Orsay, Université Paris-Sud, France

KN19 Thursday


Use of Microgrids and DERs for black start and islanding operation

By Prof. João A. Peças Lopes IEEE Follow, Porto University, Portugal.

KN30 Friday


The quest for new functional applications of environmentally friendly ceramic tiles in the context of a circular economy By Prof. Juan Bautista Carda Castelló, Universitat Jaume I, Spain.

KN32 Friday


Long and short-term PV module and array performance calculations and feasibility studies By Prof. Bulent Akinoglu Middle East Technical University, Ankara, Turkey.

https://med-space.org/irsec18/juan-bautista-carda



7


Workshop 1 Thursday, December 6, 2018

Challenges and opportunities in the electronic properties of two-dimensional materials: when theory meets experiment

https://med-space.org/irsec18/workshop1

Chairs:

Prof. Abdelkader Kara, University of Central Florida, USA

Prof. Abdelilah Benyoussef, Moroccan Foundation for Advanced Science, Innovation and Research, Morocco.


Plenary Room

New 2D materials: silicene and phosphorene By Prof. Hamid Oughaddou Institut des Sciences Moléculaires d’Orsay, Université Paris-Sud, France

KN15 Thursday


Interface Characteristics of 2D Organic Materials on Metal Surfaces Prof. Abdelkader Kara, University of Central Florida, USA

KN16 Thursday


Engineering of novel electronic materials by the atomically precise on-surface synthesis of graphene nanostructures By Dr. Oliver Gröning Empa Materials Science and Technology, Dübendorf, Switzerland.

KN17 Thursday


Optoelectronics of two-dimensional post-transition metal chalcogenides By Dr. Samuel Magorrian National Graphene Institute, Manchester, UK.

KN18 Thursday


Computer modelling and design of two-dimensional materials beyond graphene By Dr. Ari Paavo Seitsonen Research Engineer at École Normale Supérieure, Paris, France.

Associated Tutorial

TU02 Wednesday

& Thursday

18:30-20:00

First-principle design of 2D materials Prof. Abdelkader Kara, University of Central Florida, USA Dr. Ari Paavo Seitsonen, Research Engineer at ENS Paris, France. Dr. Omar Mounkachi, Faculty of Science, Med V University, Rabat, Morocco.

More information: https://med-space.org/irsec18/tutorial2 To register: https://med-space.org/irsec18/register-tutorial

8


Workshop 2 December 5 - 6, 2018

Excitonic Solar Cells: perovskites, organic and dye-sensitized solar cells


Chairs: Mohammad Khaja Nazeeruddin, Ecole Polytechnique Federale de Lausanne, Switzerland Shahzada Ahmad, Basque Center for Materials, Applications and Nanostructures, Leioa, Spain


Plenary Room

Prof. Mohammad Khaja Nazeeruddin, Ecole Polytechnique Federale de Lausanne, Switzerland


Plenary Room

Perovskite solar cells: A paradigm shift in thin film photovoltaics research By Prof. Shahzada Ahmad Basque Center for Materials, Applications and Nanostructures, Leioa, Spain


Plenary Room

Engineering 2D/3D Hybrid Perovskites for Stable and Efficient Solar Cells by Dr. Grancini Giulia, Ecole Polytechnique Federale de Lausanne, Switzerland

KN23 Thursday


Excitons in 3D Pb-free Bulk and in Mixed 3D/2D Hybrid Perovskites: Optical Signatures and Spatial Localization By Dr. Giacomo Giorgi University of Perugia, Italy.

KN24 Thursday


Strategies for hole transporting layer for efficient and stable perovskite solar cells By Dr. Samrana Kazim Basque Center for Materials, Applications and Nanostructures, Leioa, Spain

https://med-space.org/irsec18/shahzada-ahmad

https://med-space.org/irsec18/giulia-grancini

https://med-space.org/irsec18/samrana-kazim


https://med-space.org/irsec18/shahzada-ahmad

https://med-space.org/irsec18/giulia-grancini/


9


Workshop 3 Thursday, December 6, 2018

Energy Efficiency in Buildings


Chairs: Moncef Krarti, University of Colorado, USA Amir Ali Feiz, University of Evry, France Mohammed Garoum, EST Salé, Mohammed V University, Morocco

KN12 Thursday


Benefits of Scale-up Building Energy Efficiency Programs By Prof. Moncef Krarti Workshop Chair University of Colorado, USA

KN13 Thursday


Energy Efficiency and using of Renewable Energy In the field of tension between prosperity, environmental protection, resource conservation and economical aspects By Dr. Saad Baradiy, FB Immobilien Consulting, iproplan® Planungsgesellschaft mbH, Germany

KN14 Thursday


Towards zero-energy buildings and neighborhoods By Dr. Maria Wall, Division of Energy and Building Design, Lund University, Sweden

W3 (1)

Energy Efficiency in Buildings Workshop

Chairs: Maria Wall, Division of Energy and Building Design, Lund University, Sweden Salif Gaye, Thies University, Senegal Asmae Khaldoun, AUI, Ifrane, Morocco

Invited Talk 10:00-10:30

Room 2

Building materials and building components: Experimental and numerical approach By Prof. Mohammed Garoum, EST Salé, Mohammed V University, Morocco

Oral presentations

Thurday 11:30-13:00

Room 2

Implementation of measures of energy savings in school buildings (ID-37) Carlos Avila Infrared thermography detection of flex cracks in Multi-layer Ceramic Capacitors (MLCCs) (ID-43) Asseya Elamiri, Hamza Mokhliss, Abderrahim Saifi, Hicham Halloua, Ahmed Elhassnaoui, Abdellatif Obbadi, Youssef Errami and Smail Sahnoun Numerical investigation of the latent heat storage during the melting driven natural convection around heat source embedded in a rectangular cavity: Application to the passive cooling of microprocessors (ID-73) Faraji Hamza, Faraji Mustapha and El Alami Mustapha Cooling performance of an Earth to Air Heat Exchanger in hot semi-arid climate: Parametric study (ID-115) Hassan Mahach and Brahim Benhamou Thermal performance of residential buildings in Ben Guerir city: A comparative evaluation for an optimized thermal load needs (ID-156) Sara El Kadiri, Samir Idrissi Kaitouni, Badr Ikken and Rabie El Othmani The effect of Green Building Envelopes on the thermal comfort and Cooling and heating energy performance in hot and dry climate (ID-254) Naima Fezzioui, Soufiane Mesmoudi, Yassine Miloudi and Claude-Alain Roulet

https://med-space.org/irsec18/moncef-krarti

https://med-space.org/irsec18/saad-baradiy/



https://med-space.org/irsec18/maria-wall/


https://med-space.org/irsec18/maria-wall/

10


W3 (2)

Energy Efficiency in Buildings Workshop

Chairs : Saad Baradiy, iproplan Planungsgesellschaft mbH, Germany David Carlos Avila Ramírez, University of Guadalajara, Mexico Najma Laaroussi, EST Salé, Mohammed V University, Morocco

Invited Talk 14:45-15:15

Room 2

Energy Efficiency Assessment in Residential Buildings in Hot Semi-Arid-Climate : Case studies By Prof. Brahim Benhamou, Faculty of Science Marrakech, Morocco Co-authors: Brahim Benhamou, Issam Sobhy, Hicham Mastouri, Hassan Mahach, Salah Kachkouch

Oral presentations

Thursday

15:15-16:15 &

17:00-18:30 Room 2

Energy efficient houses meeting both bioclimatic architecture principles and Moroccan thermal regulation (ID-270) Khalid El Harrouni, Mohamed Filali, Hassan Kharmich, Majid Mansour, Najma Laaroussi and Mohammed Garoum The effect of clay consistency on the thermophysical properties of composite material clay-straw (ID-272) Yassine Chihab, Saad Raefat, Mohammed Garoum, Najma Laaroussi and Rachid Bouferra The Photovoltaic Energy Potential of Roofs in Zaouiat Sidi-Abdeslam (ID-273) Widad Yossri, Ayoub El Baraka and Asmae Khaldoun Urban surface albedo as a tool of a bioclimatic design in hot and dry climate: case of Fez (ID-289) Kaoutar Ouali, Khalid El Harrouni and Moulay Larbi Abidi Eco-Friendly Fired Clay Bricks (ID-318) Yosra El Boulli Rguibi, Ayoub El Baraka and Asmae Khaldoun Rheology of clay and clay housing in Bensmim (ID-341) Houda Ghailane, El Boukili Ghita and Asma Khaldoune Dynamic Life Cycle Assessment in the Building Sector (ID-364) Patrice Megange, Pierre Ngae, Amir Ali Feiz, Ahmed Melhaoui, Amer Chpoun and Thien-Phu Le Numerical Study of the Impact of Clay-Straw Walls on the Energy Performance of a Residential Building (ID-377) Mouatassim Charai, Haitham Sghiouri, Ahmed Mezrhab and Mustapha Karkri Modeling and Performance Evaluation of an Air-Soil Exchange System in Energy Efficient Buildings (ID-362) Abdelhak Kharbouch, Anas El Maakoul, Mohamed Bakhouya and Driss El Ouadghiri

Workshop Organizing Committee Prof. Mohammed Garoum, EST, University Mohammed V in Rabat, Morocco

Dr. Asmae Khaldoun, Al Akhawayn University, Ifrane, Morocco

Dr. Najma Laaroussi, EST, University Mohammed V in Rabat, Morocco

Associated Tutorial

TU02 Wednesday

& Thursday

18:30-20:00

TRNSYS Tutorial By Mr. Younness El Fouih, Director, Trusted Energy Consulting, Morocco


Acknowledgement : These Workshop and Tutorial are organized with the support of GIZ Morocco. Thanks to Mr. Philippe

Simonis, Ms. Fatiha El Mahdaoui, Mr. Omar Zerzouri, and all GIZ team.

https://med-space.org/irsec18/tutorial1

11


Workshop 4 Friday, December 7, 2018

Ternary and multinary compounds: Structure, Devices, Simulation and modeling


Chairs: Susan Schorr, Helmholtz Zentrum Berlin für Materialien und Energie (HZB), Germany. Ahmed Ennaoui, Chairman of the Scientific Council, IRESEN, Morocco.

KN25 Friday


Prof. Dr. Susan Schorr, Helmholtz Zentrum Berlin für Materialien und Energie (HZB), Germany.

KN26 Friday


Copper-based chalcogenides for ultrathin inorganic solar cells By Prof. Clas Persson, University of Oslo, Norway & KTH Royal Institute of Technology, Stockholm, Sweden

KN27 Friday


Crystalsol’s Printed Single Crystalline Kesterite Photovoltaic Modules By Prof. Dieter Meissner, Tallinn University of Technology, Estonia.

KN28 Friday


Development of High performance Cadmium free Cu-chalcopyrite thin film solar cells with CBD-Zn(S,O) buffer layer By Prof. Ahmed Ennaoui, Chairman of the Scientific Council, Institut de Recherche en Energie Solaire et Energies Nouvelles (IRESEN), Morocco.

KN29 Friday


Kesterite Thin Film Photovoltaics: Review on Cationic and Anionic Substitution for High Efficiency Solar Cells By Dr. Edgardo Saucedo, Catalonia Institute for Energy Research (IREC), Barcelona, Spain.

KN30 Friday


The quest for new functional applications of environmentally friendly ceramic tiles in the context of a circular economy By Prof. Juan Bautista Carda Castelló, Universitat Jaume I, Spain.

KN31 Friday


Progress and Challenges in High-efficiency Kesterite Solar Cells By Dr. Teodor Todorov, IBM T. J. Watson Research Center, Yorktown Heights, USA.

https://med-space.org/irsec18/clas-persson/

https://med-space.org/irsec18/dieter-meissner

https://med-space.org/irsec18/ahmed-ennaoui


https://med-space.org/irsec18/edgardo-saucedo




https://med-space.org/irsec18/teodor-todorov/

https://med-space.org/irsec18/susan-schorr

https://med-space.org/irsec18/clas-persson/

https://med-space.org/irsec18/dieter-meissner




https://med-space.org/irsec18/teodor-todorov/

12


Workshop 5 Friday, December 7, 2018



Chairs :

Dr. Khalil Amine Manager of the Advanced Lithium

Battery Technology program at Argonne National Laboratory, IL,

USA.

Prof. Ismael Saadoune FST, Cadi Ayyad University,

Marrakech, Morocco.


Plenary Room

Safe and Highly Conductive Electrolytes: From Liquid to Solid By Prof. Andreas Hintennach Daimler AG, Mercedes-Benz, Group Research, Germany.


Plenary Room

Safe Li-ion Batteries and Beyond for Energy Storage and EVs By Dr. Karim Zaghib Director at Hydro-Québec, Canada.


Plenary Room

Microscopic Additive Effect on SEI Film Formation in Sodium-Ion Batteries: A Computational Chemical Study based on Red Moon Methodology By Prof. Masataka Nagaoka Nagoya University, Japan.


Plenary Room

Recent advances, current challenges and future trends on sodium-ion batteries By Prof. Teofilo Rojo Director at CIC EnergiGUNE, Spain.


Plenary Room

Understanding Lithium Metal Failure Mechanism in Realistic High-Energy Pouch Cells By Dr. Jie Xiao Pacific Northwest national laboratory & University of Arkansas, USA.

Associated Tutorial

TU04 Wednesday 17:30-20:00

Introduction to Electrochemical Energy Storage Technologies Tutorial

Prof. Mouad Dahbi, Med VI Polytechnic University, Morocco Dr. Amine Bouibes, Nagoya University, Japan


13


W5 (1)


Chairs Karim Zaghib, Director at Hydro-Québec, Canada Teofilo Rojo, Director at CIC EnergiGUNE, Spain Mouad Dahbi, Med VI Polytechnic University, Morocco

Oral presentations

Wednesday 11:45-12:45

(Room 3)

Development of Aqueous Electrolyte Sodium Based Rechargeable Batteries(ID-283) (Local) Rezan Demir-Cakan State of Charge Estimation of Supercapacitor using Artificial Neural Network for Onboard Railway Applications (ID-221) Sadiq Eziani and Mohammed Ouassaid Co3-xMnxO4 as a high Capacity Anode Material for Lithium Ion Batteries (ID-290) Loubna Hdidou, Ilham Bezza, Youssef Tamraoui, Mouad Dahbi, Fouad Ghamouss, Hassan Hannache, Ismael Saadoune, Jones Alami and Bouchaib Manoun

W5 (2)


Chairs Masataka Nagaoka, Nagoya University, Japan. Jie Xiao, Pacific Northwest national laboratory & University of Arkansas, USA. Ismael Saadoune, FST, Cadi Ayyad University, Marrakech, Morocco.

Oral presentations

Thursday

08:45-10:30

(Room 3)

Degradation of Lithium-ion Batteries in Electric Vehicles at High Temperatures: A Case study (ID-

392) Kawtar Benabdelaziz, Mohammed Maaroufi and Badr Ikken Microscopic Mechanism of FEC Concentration Effect on SEI Film Formation in Na-ion Batteries (ID-422) Amine Bouibes, Norio Takenaka, Takuya Fujie, Kei Kubota, Shinichi Komaba and Masataka Nagaoka

14


Workshop 6 December 6 - 7, 2018



Chairs: João A. Peças Lopes, Porto University, Portugal. Frank Ball, Frank Ball Consulting, Abingdon, UK Mohamed Bakhouya, International University of Rabat, Morocco

KN19 Thursday


Use of Microgrids and DERs for black start and islanding operation By Prof. João A. Peças Lopes Workshop Chair IEEE Follow, Porto University, Portugal.

KN19 Thursday


Validating Microgrids Islanding and Black Start Procedures in a Laboratorial Environment By Dr. Carlos Moreira Faculty of Engineering, Porto University, Portugal.

KN19 Thursday


The Influence of Implementation Uncertainties in the Optimal Real-Time Operation of Inertia-less Microgrids. By Dr. Lorenzon Chamorro EPFL, Lausanne, Switzerland.

KN19 Thursday


Operation of Isolated Power Systems under High Shares of Renewables. By Dr. Lukas Sigrist Universidad Pontificia Comillas, Spain.

W6


Chairs: Carlos Moreira, Faculty of Engineering, Porto University, Portugal. Lukas Sigrist, Universidad Pontificia Comillas, Spain. Lorenzon Chamorro, EPFL, Lausanne, Switzerland. Ahmed Chebak, University of Quebec at Rimouski, Canada.

Oral presentations

Friday

08:45-11:15 &

12:15-13:15

(Room 1)

Robust Control of three phase Grid Connected PV system based on ADRC and Fuzzy (ID-62) Imad Aboudrar and Soumia El Hani Multi-objective energy management of a grid-connected photovoltaic-wind-battery hybrid system using deterministic approach (ID-145) Meryeme Azaroual, Mohammed Ouassaid and Mohamed Maaroufi Demand Side Management Strategy by Optimal Day-ahead Load Shifting in Smart Grid (ID-146) Rajaa Naji El Idrissi, Mohammed Ouassaid and Mohamed Maaroufi Evaluation of Communication Latency for Future Time-Critical Smart Grid Measurement and Control systems (ID-153) Frank Ball, Kashinath Basu, Tatiana Balikina and Ali Maqousi An End to End Real Time Architecture for Analyzing and Clustering Time Series Data: Case of an Energy Management System (ID-216) Hanaa Talei, Driss Benhaddou and Mohamed Essaaidi Smart Buildings for Smart Grids: A Real-world Testbed (ID-259) Safae Bourhnane, Mohamed Riduan Abid, Rachid Lghoul, Khalid Zine-Dine, Najib El Kamoun, Mohammed Khaidar, Mohamed Bakhouya and Driss Benhaddou Analysis of Cyber-Physical Security in Electric Smart Grid - Survey and challenges (ID-349) Hans John Dcruz and Baskaran K

15


A new approach for Photovoltaic Power Prediction based on Chaos theory (ID-402) Hasnaa Bazine, Mustapha Adar, Mustapha Mabrouki and Ahmed Chebak Simulation study of three PV systems (ID-409) Mustapha Adar, Hasnaa Bazine, Youssef Najih, Caouthar Bahanni, Mustapha Mabrouki and Ahmed Chebak Energy Efficient Medium Access Control Protocol for Wireless Sensor Networks (ID-251) Abdul Razaque, Zhou Xihao, Meer Jaro Khan, Yaser Jararweh and Muder Almiani

Associated Tutorial

TU03 Wednesday

& Thursday

18:30-20:00

Introduction to Data Analysis using Matlab Tools By Dr. Hanane Hemi, Research scientist at SASV group at LIS UMR Marseille, France


https://med-space.org/irsec18/tutorial3

16


Sessions Program

S-I – PV (1)

Solar Energy - PV

Chairs: Clas Persson, University of Oslo, Norway Vladimir Falko, National Graphene Institute, Manchester, UK. Ivan Gordon, Silicon PV group, imec, Belgium Ahmed Ennaoui, Institut de Recherche en Energie Solaire et Energies Nouvelles, Morocco.


(Room 1)

The Nexus of Energy For Free and World Society (ID-310) Veronika Wittmann and Dieter Meissner Improvement the Efficiency of Solar Cell Based on GaAsNSb/Si (ID-18) Abdelkader Aissat, Rachid Bestam, Said Nacer, Jean Pierre Vilcot Study of CZTSSe growth by chemical route onto alternative substrates for architectural integration (ID-253) Ivan Calvet, Ester Barrachina, Diego Fraga, Teodora Stoyanova and Juan Carda Two-dimensional electronic materials for Terahertz applications: Linking the physical properties with engineering expertise (ID-337) Amine El Moutaouakil Modulation on dye/TiO2 bending energy and charge transfer to high performance triphenylamine based sensitizers in solar cells: a DFT study (ID-206) Zakaria Mohyi Eddine Fahim, Youssef Ait Aicha, Si Mohamed Bouzzine, Mohammed Bouachrine and Mohamed Hamidi Structural, optical and electrical properties of Fe-doped CdS thin films prepared by spray pyrolysis method (ID-275) Lahcen Soussi, Ahmed Rmili, Ahmed Louardi, Abdelhadi El Bachiri, Ouiame Karzazi, Hassane Erguig and Bachir Elidrissi Stabilisation attempts of the electrical and optical properties of Oxide/Cu/Oxide structures through the use of different Cu:M alloys. (ID-64) Linda Cattin, Guy Louarn, Jean Christian Bernede, Philippe Torchio, Dhiya-Eddine Rabia, Martin Blais, Zouhair El Jouad, Mohammed Addou, Hatem Essaidi, Saad Touihri, Mohamed Amed Cherif, Younes Mouchaal, Abdelbacet Khelil, Damien Barakel and Philippe Blanchard Comparative Study on Cu2ZnSnS4 (CZTS) Thin Film Using Different Sulfur Precursor (ID-154) Sara Azmi, Mohssine El Marrakchi, Mohamed Nohair, Karima Echcherki and El Mati Khoumri New investigations of soiling impact on PV modules performances: correlation with climatic conditions of Rabat in Morocco (ID-298) Dounia Dahlioui, Bouchra Laarabi, Soukaina Medaghri Alaoui, Abdelfettah Barhdadi, Gauthier Dambrine, Etienne Menard and Jay Boardman Development of a new low cost cleaning technique for PV modules on solar tracking systems (ID-305) Abdelilah Said, Soukaina Medaghri Alaoui, Youssef Rouas, Bruno Binet, Gauthier Dambrine, Etienne Menard, Jay Boardman and Abdelfettah Barhdadi DFT study of structural, electronic and optical properties of ZnS (ID-100) Adil Es-Smairi, Nejma Fazouan, Ibrahim Bziz and El Houssine Atmani

S-I – PV (2)

Solar Energy - PV

Chairs: Oliver Gröning, Empa Materials Science and Technology, Dübendorf, Switzerland. Ruxandra Vidu, University of California, USA. Dieter Meissner, Tallinn University of Technology, Estonia. Susan Schorr, Helmholtz Zentrum Berlin für Materialien und Energie (HZB), Germany.

Thursday 08:45-10:30

(Room 1) &

18:00-18-30 (Plenary Room)

Photovoltaic Parameter extraction methods for Single and double Diode Models under real changing environmental conditions (ID-51) Karima Et-Torabi, Ilham Nassar-Eddine, Redouane Rmaily, Abdellatif Obbadi, Errami Youssef, Smail Sahnoun, Abdelkrim El Fajri and Mustapha Agunaou Improvement of Performances of Solar Photovoltaic/Thermal Air Collector in South Algeria (ID-159) Khaled Touafek, Abdelkrim Khelifa, Hafsia Haloui, Hanane Bencheikh El Hocine, Ilyes Boutina, Salim Haddad, Ismail Tabet, Mohamed Tahar Baissi and Ali Malek

17


Fuzzy Logic Approach To Improve The performances of Grid-Connected Photovoltaic Power System (ID-160) Mhamed Fannakh, Mohamed Larbi Elhafyani and Smail Zouggar A customized PV performance monitoring system in Qatar’s harsh environment (ID-209) Farid Touati, Antonio S. P. Gonzales and Yazan Qiblawey PV Power Prediction in Qatar Based on Machine Learning Approach (ID-279) Kamel Benhmed, Farid Touati, Mohammed Al-Hitmi, Noor A. Chowdhury, Antonio Jr S. P. Gonzales, Yazan Qiblawey and Mohieddine Benammar Proteus based PV simulator: case test for P & O MPPT algorithms (ID-293) Abdelilah Chalh, Saad Motahhir, Aboubakr El Hammoumi, Abdelaziz Elghzizal and Aziz Derouich Effect of Three Different Masks Configuration on the Electrical Characteristics of Amorphous Silicon Solar Cells using Plasma Enhanced Chemical Vapor Deposition (ID-340) Kawtar Belrhiti Alaoui, Saida Laalioui, Badr Ikken and Abdelkader Outzourhit Modeling of Si-Based Nanowires by Insertion of SiGe Quantum Wells (QWNW) (ID-113)

Abdelkader Aissat and Meriem Safi

Innovative cleaning technique for PV modules on HeLioslite biaxial solar trackers (ID-307) Dounia Dahlioui, Soukaina Medaghri Alaoui, Salima El Ayane, Abdelfettah Barhdadi, Gauthier Dambrine,

Etienne Menard and Jay Boardman

Effect of seasonal dust on photovoltaic modules performances under Lisbon climate conditions (ID-267)

Salima El Ayane, João Manuel De Almeida Serra and Abdelfettah Barhdadi

Modified Predictive Model Control based MPPT for Standalone PV in Distribution System (ID-86)

Halima Ikaouassen, Kawtar Moutaki, Abderraouf Raddaoui and Miloud Rezkallah

Simulation and optimization performance of GaAs homojunction solar cell with BSF layer(ID-430)

Bellal Najat and Dennai Benmoussa

S-I-Th

Solar Energy - Thermal

Chairs: El Ouafi Abderrazak, University of Quebec at Rimouski, Canada Juan Bautista Carda Castelló, Universitat Jaume I, Spain Aissat Abdekader, University of Blida, Algeria

Friday 08:45-11:15

& 12:15-12:45

(Room 3)

Determining the thermal properties of deposits by infrared thermography in the solar thermal energy system piping and the booster heating. (ID-84) Abderrahim Saifi, Asseya El-amiri, Hicham Halloua, Ahmed Elhassnaoui, Abdellatif Obbadi, Youssef

Errami, Smail Sahnoun

Solar Energy in M'Sila (Algerian Province) (ID-202) Feres Hadji, Nabila Ihaddadene, Razika Ihaddadene, Younes Kherbiche and Merouan Mostefaoui The Observation of Ice at the Interface between Snow Accumulations and PV Panel Surfaces (ID-210) Robert Pawluk, Yuxiang Chen and Yuntong She Experimental Study on a Constructed Solar Air Heater in a Coastal Area (ID-286) Fatima Chanaa, Rachid Bendaoud, Said Bounouar, Charaf Hajjaj, Hassan Ezzaki, Abdelhaq El Rhassouli, Abdel Ilah Faké, Redouane Rmayli and Mohammadi Benhmida Impact of the Parabolic Solar Concentrator's rim angle on the quantity of reflected rays and concentrated flux on the receiver (ID-301) Raja Idlimam, Abdellah Bah, Mohamed Asbik, Mustapha Malha and Halima Kazdaba Optimization and evaluation of the photovoltaic system in a farm studio located in Ghardaïa (ID-367) Kaddour Abdelmadjid, Simmohamed Amine Bekkouche, Benyoucef Boumédiene, Bezari Salah Optical Analysis of an Evacuated Parabolic Trough Receiver With a Plate Absorber (ID-418) Mohamed Boukhalfa, Mustapha Merzouk and Nachida Kasbadji Merzouk

18


S-II (1)

Wind Energy

Chairs Davis Michael, University of Louisiana, Lafayette, USA El Sinawi Ameen, Khalifa University, United Arab Emirates Ahmed Essadki, ENSET, Morocco

Wednesday 14:15-16-45

(Room 2)

Dynamic Participation of a DFIG-based Wind Turbine Controlled using Backstepping in Frequency

Regulation (ID-90) Mohamed Nadour, Ahmed Essadki, Mohammed Arbaoui and Tamou Nasser Linear Active Disturbance Rejection Control (LADRC) of a variable speed Wind Energy Conversion System using a DFI-Generator (ID-99) Hammadi Laghridat, Ahmed Essadki, Maha Annoukoubi and Tamou Nasser Geolocating Aeola for use in Wind Turbine Siting (ID-105) Michael Davis and Mohammad Madani Diagnosis of Rotor Winding Inter-turn Short Circuit Fault in Wind Turbine Based on DFIG using Hybrid TSA/DWT Approach (ID-207) Hamza Sabir, Mohammed Ouassaid and Nabil Ngote 3D-Printing of a Functional Small Scale Wind Turbine (ID-217) Michael Davis and Mohammad Madani Investigation into the Effects of Static Electricity on Wind Turbine Systems (ID-218) Michael Davis and Mohammad Madani Sliding Mode Current Control Combined With Single Input Fuzzy Logic Voltage Controller to Regulate Asynchronous Wind Turbine Output Terminals Using STATCOM (ID-224) Mohammed Mokhtari, Zouggar Smail, Elhafyani Mohamed Larbi, Nacer K M’sirdi and Azziz Naaman Modified Unifield Control of VSC-HVDC Based Offshore Wind Farm Connected to Onshore Large-Scale Photovoltaic Power Station (ID-242) Seghir Benhalima, Ambrish Chandra, Miloud Rezkallah, Mounir Benadja, Fadoul Souleyman Tidjani, Abderaouf Raddaoui and Halima Ikaouasseen Techno-Economic Optimization of Grid-Tied Hydrogen-Renewable-Based Power Plant (ID-357) Hammou Tebibel and Sabah Menia

S-II (2)

Wind Energy

Chairs: Nedim Tutkun, Istanbul Aydin University, Turkey Badre Bossoufi, EST-Oujda, Morocco Mohamed Ouassaid, EMI, Med V University in Rabat, Morocco

Thursday

11:00-13:00 &

14:45-16:15 &

17:00-18:30 (Room 1)

Channeling of Static Electricity within Wind Turbines for Transmission into the Power Grid (ID-296) Michael Davis and Mohammad Madani A Low Cost Method to Convert Automotive Alternator for Wind Electricity Generation (ID-297) Tuanku Hashfi, Hussain Shareef, Saad Khan and Mainul Islam Effect of fiber orientation on the mechanical behavior of horizontal axis wind turbine blades (HAWTB) (ID-302) Omar Rajad, Hamid Mounir, Saïf Ed-Dîn Fertahi and Abdellatif El Marjani Damage Identification of Wind Turbine's Blades using Power Spectral Density and Kriging Analysis (ID-308) Mohammed Awadallah, Ameen El-Sinawi and Isam Janajreh Pulsating Modelisation Study of Dynamic Stall Applied to HAWT (ID-332) Dizene Rabah and Noura Belkheir Direct Torque Control of a Doubly Fed Induction Generator of a Wind Energy Conversion System. (ID-374) Maryam Taleb, Mustapha El Haroussi and Abdelfattah Ba-Razzouk Design and Control of a Small Scale Wind Turbine Emulator with a DC Motor (ID-414) Sirouni Yassine, El Hani Soumia, Naseri Nisrine, Ahmed Aghmadi and El Harouri Khadija Deployment and Experimental Evaluation of Micro-Grid Systems (ID-314) Abdellatif Elmouatamid, Mohamed Bakhouya, Radouane Ouladsine, Najib Elkamoun, Khalid Zine-Dine, Mohammed Khaidar and Mohamed Riduan Abid Wind energy to power household (ID-152) Djohra Saheb, Meriem Kemmache, Meriem Tamart, Mourad Haddadi, Ahmed Boufertella and Mustapha Boudreaf Feasibility Study of Energy Hybrid Systems for Villages of the Southern Moroccan Coastline (ID-188) Imad Harraki, Abdelbari Redouane, Abdennebi El Hasnaoui and Prince Hacouetey

19


Analysis of Wind Data and Wind Energy Potential of the East of Mohammedia, Morocco (ID-197) Mohamed El Yazidi, Mohammed Benzirar and Abdelbari Redouane Reduction of the wind turbine noise using CFD (Computational Fluid Dynamics) techniques (ID-322) Mohamed Maizi, Tata Majid and Ahmed Bekhti

S-III Biomass

Biomass

Chairs Vinod Kumar Sharma, ENEA, Italy Isam Janajreh, Khalifa University of Science and Technology, UAE Tarik Chafik, FST Tangier, Morocco

Invited talk Status of Biomass Based Power Generation Gasification Technologies Dr. Vinod Kumar Sharma, ENEA Research Centre, Italy


(Room 1)

The efficient co-culture fermentation process, for producing 2G bioethanol (ID-22) Mohamed Anouar Kamzon, Souad Abderafi and Tijani Bounahmidi Valorization of Moroccan olive cake in small scale burner through Stirling engine: Case study (ID-58) Nadia Rassai, Noureddine Boutammachte and Kaoutar Laazaar Two-stage Anaerobic Upflow Biofilm Reactor for Simultaneous Hydrogen and Methane Production from Food Waste (ID-359) Gamal Hassan, Sherien Elagroudy, M.M. Abo-Aly, Mohamed El-Liethy, Isam Janajreh and Fatma El-Gohary Degradation of methylene blue using ZnO photocatalyst in water purification (ID-424) M. Bouchaour, L. Merad, R. Bensaha, S A. Benyelles, D. Guettaia, A. Ouldabbasa, N-E. Chabane Sari and N. Maloufi

S-III

Green technology Energy efficiency

Chairs Maria Wall, Lund University, Sweden Abdelmajid El Bouardi, Faculty of Science, Tetouan, Morocco

Friday 08:45-11:15

& 12:15-12:45

(Room 2)

An Improved Approach of Control for a Battery Charger Based Forward Converter and SEPIC (ID-178) Abdelilah Hassoune, Mohamed Khafallah, Abdelouahed Mesbahi and Tarik Bouragba Optimization of off-grid photovoltaic systems reverse osmosis using response surface methodology (ID-67) Yousra Jbari and Souad Abderafi Standing wave thermoacoustic refrigerator: the principle of thermally driven cooling (ID-118) Zahra Bouramdane, Abdellah Bah, Nadia Martaj and Mohammed Alaoui Temporal monitoring of temperature and incident irradiance for predicting photovoltaic solar module peak power and efficiency using analytical expressions of model physical parameters (ID-112) Mhammed Zaimi, Hicham El Achouby, Asmaa Ibral, Mohammed Salaheddine El Maliki, Rachid Saadani and El Mahdi Assaid Modeling and Robust Integral Sliding Mode Control For a Quadrotor Unmanned Aerial Vehicle (ID-140) Moussa Labbadi and Mohamed Cherkaoui Simulation of bubble dynamic behavior in subcooled flow boiling, application to energy systems design (ID-148) Amal Igaadi, Rachid El Amraoui and Hicham El Mghari Approaches and processes for recovering reverse osmosis discharges from desalination plants (ID-198) Belhout Dalila, Belgroun Zoubir, Abbas Mohamed, Tigrine Zahia and Tassalit Djilali Optimal Power Flow Solution Including Stochastic Renewable Resources (ID-222) Fatima Daqaq, Mohamed Ouassaid, Rachid Ellaia and Ahmed Tchvagha Zeine Experimental characterization of a Double-Effect Absorption Heat Pump-MED system driven by parabolic trough collectors (ID-328) Aicha Chorak, Patricia Palenzuela, Diego-César Alarcón-Padilla and Abdellatif Ben Abdellah Design of a PV Powered Charging Station for PHEVs (ID-335) Nedim Tutkun and Arif Nur Afandi High-fidelity Simulation and Parametric Analysis of Static Indirect Freeze Desalination Process (ID-354) Khadije El Kadi and Isam Janajreh Optimization of the distillation column of petroleum fractions using ANN method (ID-411)

20


Ahmed Ould Brahim, Souad Abderafi and Tijani Bounahmidi CFD Modelling of Olive Pomace Combustion in a Fixed Bed (ID-292) Ilias Bakhattar, Mohammed Allae Bennini, Mohamed Asbik, Abdallah Elorf, Brahim Sarh and Toufik Boushaki

S-IV (1)

Command and control systems for RE Simulation and Modelling for RE

Chairs Hamid Oughaddou, Institut des Sciences Moléculaires d’Orsay, Université Paris-Sud, France Grancini Giulia, Ecole Polytechnique Federale de Lausanne, Switzerland Nachida Kasbadji Merzouk, CDER, Algeria


(Room 3)

A New Intelligent MPPT Based on ANN Algorithm for Photovoltaic System (ID-63) Jawad Chorfi, Malika Zazi and Mohamed Mansori Comparative Study of MPPT and Pitch Angle Using PI And Fuzzy Logic Controllers (ID-194) Ibtissam Kharchouf, Ahmed Essadki, Mohammed Fdaili and Tamou Nasser A Self-Tuning Fuzzy Controller for Three-Level Boost Converter (ID-199) Imane Ait Ayad, Elmostafa Elwarraki and Abdellatif Nouri An Efficient Fuzzy Logic Based MPPT Control Strategy for Multi-Source Hybrid Power System (ID-331) Soro Siellé Martin, Ahmed Chebak, Abderazak El Ouafi and Mustapha Mabrouki A Fuzzy Logic and Sliding Mode Control for a Grid-Connected Current Source Inverter Photovoltaic System (ID-388) Abdellahi Sidi Mohamed Nabgha and Mohamed Ouassaid Active Power Filter for Power Quality enhancement in Grid Connected PV-sytem using a Fuzzy Logic Control MPPT (ID-421) Mouna Tali and Tamou Nasser Simple and Low-Cost Solution System for a small scale power photovoltaic water pumping system (ID-260) Djamila Rekioua, Said Aissou, Toufik Rekioua and Seddik Bacha

S-IV (2)

Command and control systems for RE Simulation and Modelling for RE

Chairs Samrana Kazim, Basque Center for Materials, Applications and Nanostructures, Leioa, Spain Abdelhafed Taleb, Chimie-Paristech, France Ari Paavo Seitsonen, Research Engineer at École Normale Supérieure, Paris, France.


(Room 2)

Deep Learning Algorithm Applied to Daily Solar Irradiation Estimations (ID-70) Erol Can Akbaba, Emre Yuce and Bulent G. Akınoglu Analysis and Comparison of Line Voltage Stability Indices (ID-91) Oukennou Aziz and Sandali Abdelhalim An Improved No-load Voltage Model for Proton Exchnage Membrane Fuel Cell Systems Using Curve Fitting Method (ID-295) Saad Khan, Hussain Shareef and Addy Wahyudie Real-time implementation of Robust controller for PV emulator supplied shunt active power filter (ID-378) Hamza Afghoul, Fateh Krim, Antar Beddar and Badreddine Babes Artificial neural network modeling to predict the moisture removal rate of a liquid desiccant dehumidifier system (ID-280) Fatih Bouzeffour and Djelloul Belkacemi Modeling and Simulation of PV Generator Characteristics under LabVIEW (ID-397) Boualem Bendib, Hocine Belmili, Sabri Boulouma, Hachemi Rahmani and Fateh Krim Open Circuit Voltage of a Lithium ion Battery Model adjusted by data fitting (ID-304) Hanane Hemi, Nacer K M’Sirdi, Aziz Naamane and Badr Ikken Comparison Between Proposed Fuzzy Logic and Anfis for MPPT Control for Photovoltaic System (ID-232) Adel Haddouche, Mohammed Kara and Ali Haddouche Modeling and Simulation of PV Generator Characteristics under LabVIEW(ID-397) Boualem Bendib, Hocine Belmili, Sabri Boulouma, Hachemi Rahmani and Fateh Krim

21


S-V

Energy storage and Batteries Energy harvesting

Hydrogen energy storage

Chairs Bouibes Amine Nagoya University ,Japan Mawire Ashmore, North-West University, South Africa Djamila Rekioua, University of Bejaia, Algeria

Thursday

11:00-13:00 &

14:45-16:15 &

17:00-18:30 (Room 3)

Energy and exergy performance of three sensible heat storage systems during charging

(ID-2) Ashmore Mawire, Katlego A. Lentswe, Denis Okello, Karidewa Nyeinga, Robert Lugolole Li-Ion Battery Charger with an LDO Regulator for a Portable Device Power Management (ID-161) Mounir Ouremchi, Karim El Khadiri and Hassan Qjidaa Numerical investigation of temperature and current density distribution on (PEM) fuel cell performance (ID-205) Yassine Amadane, Hamid Mounir, Abdellatif Elmarjani and Mohamed Karim Ettouhami A computational fluid dynamics (CFD) investigation of two PEM fuel cells with straight single-channel(SC): SC-40mm and SC-50mm (ID-387) Yassine Amadane, Hamid Mounir, Abdellatif Elmarjani and Karim Mohamed Ettouhami A New Hydraulic Device to Convert Vehicles' Mechanical Energy into Electrical Energy (ID-48) Francisco Duarte, Adelino Ferreira and Paulo Fael Gasification Comparison between Plasma and Entrained Flow: Analysis of the Power Plant (ID-363) Luca Mazzoni, Isam Janajreh and Sherien Elagroudy Energy production by electric vehicle Vehicle-to-Grid (V2G) Application (415) Khadija El Harouri, Soumia El Hani, Imad Aboudrar, Ahmed Aghmadi and Nisrine Naseri Classification for A-B intermetallics compounds using the principal component analysis: hydrogen storage (ID-7) Kamel Benyelloul, Abdelkader Djellouli, Azedine Adjadj, Youcef Bouhadda Numerical simulation of heat and mass transfer in a metal hydride phase change material reactor (ID-370) Allal Babou and Yasmina Kerboua Ziari Influence of Acid-base treatment of the vermiculite on the stability of Ni supported vermiculite for hydrogen production via methane dry reforming with carbon dioxide (ID-225) Farah Mesrar, Hanane Mahir, Fatiha Ouanji and Mohamed Kacimi

22


Posters Session I

Chairs: Teodor Todorov, IBM T. J. Watson Research Center, Yorktown Heights, USA Abdelkader Kara, University of Central Florida, USA Abdelilah Benyoussef, MAScIR, Morocco. Abdelfettah Barhdadi, ENS Rabat, Morocco

Wednesday 16:45 – 17:30

Parameter identification of multicrystalline modules using two methods and five improved mathematical models (ID-28) Ilham Nassar-Eddine, Karima Et-Torabi, Redouane Rmaily, Abdellatif Obbadi, Errami Youssef, Sahnoun Smail, Abdelkrim El Fajri and Mustapha Agunaou Performance enhancement of grid-off photovoltaic pumping system-quasi z source inverter by hybrid battery-supercapacitor energy storage (ID-35) Boukebbous Seif Eddine, Kerdoun Djallel, Benbaha Noureddine, Ammar Hachemi and Bouchakour Abdelhak dSPACE Validation of Improved Backstepping Optimal Energy Control for Photovoltaic Systems (ID-38) Noureddine Benbaha, Fatiha Zidani, Mohamed Said Nait Said, Salah Eddine Zouzou, Seif Eddine Boukebbous and Hachemi Ammar Performance of Photovoltaic water pumping system in Adrar, Algeria (ID-102) Amina Bekraoui, Mohamed Yaichi Modelling the effect of temperature on the electrical performance of an HBT power transistor (ID-126) Mokeddem Nadjet and Ghaffour Kheireddine A New Design Of Lead-Acid Battery Charger Based On Non-Inverting Buck-Boost Converter For The Photovoltaic Application (ID-133) Rezzak Daoud, Sitayeb Abdelkader, Houam Yahia, Touafek Khaled and Boudjerda Nasserdine Current and voltage control of a photovoltaic system connected to grid with a unit power factor (ID-180) Salma Zouga and Mohamed Benchagra ESTIMATION OF THE MAXIMUM POWER POINT DURING A SUDDEN CHANGE OF LOAD AND SOLAR IRRADIATION (ID-215) Hafsa Abouadane and Abderrahim Fakkar Improved Maximum Power Point Tracking using fuzzy logic control with SEPIC converter for Photovoltaic systems (ID-237) Mohamed Boutouba, Abdelghani El Ougli and Belkassem Tidhaf Temperature effect on ZnGeN2 /GaN Multiwell Quantum Solar Cells Performances (ID-240) Abdelkader Aissat, Abdelmoumene Laidouci and Jean Pierre Vilcot Control board for PWM-Photovoltaic Charge Controller (ID-256) Walid Merrouche, Said Ould-Amrouche, Abdellah Bouhanik, Mohamed Oussama Zelmati and Idir Gaci A theoretical study of hysteresis behaviors of a mixed spin 2D nanopaticles (ID-317) Samira Bouhou, Mariam El Hamri, Ismail Essaoudi, Ainane Abdelmajid and Rajeev Ahuja Designing a Standalone Photovoltaic Solar Energy System for Different Locations in Algeria (ID-326) Salmi Mohamed, Bella Baci Anouar and Boursas Hakim CORRECTION OF SHADING EFFECTS ON DIFFERENT COMPONENTS OF RADIATION INCIDENT ON THE GROUND (ID-375) Hadj Sahraoui Omar, Fizazi Hadria, Berrichi Faouzi and Chamakhi Djemoui Advance Control of a Isofotón-75W Photovoltaic Module Under Matlab-Simulink (ID-379) Ghaitaoui Touhami, Laribi Slimane and Rachid Maouedj Numerical study of shell and tube heat exchangers with different baffle cuts (ID-203) Ihssane El Ghandouri, Anas El Maakoul, Mohamed Meziane, Noureddine Choab, Yassin Naim and Said Saadeddine Effect of thermal conductivity of the adsorbent bed and heat exchange coefficient on solar adsorber’s behaviour (ID-361) Chekirou Wassila, Boukheit Nahman and Karaali Ahcene Performance Investigations of Integration of a Solar Tower with a Combined Cycle (ID-373) Madjid Amani, Arezki Smaili and Adel Ghenaiet Comparative Analysis between PI and ADRC control of a variable speed Wind Energy Conversion System using a Squirrel Cage Induction Generator (ID-10) Hammadi Laghridat, Ahmed Essadki, Maha Annoukoubi and Tamou Nasser LADRC Applied for the Doubly Fed Induction Generator connected to the Micro-grid (ID-11) Abdellatif Frigui, Tamou Nasser, Ahmed Essadki and Anis Boulal The Impact of The Sinusoidal Pitch Angle on The Vertical Axis Wind Turbine Type-Darrieus (ID-30) Zineb Zitouni, Hamid Mounir and Abdellatif El Marjani Abdellatif

23


Comparative structural and modal analysis of a wind turbine planetary gear based on material cut criteria using FEM (ID-53) Abdellah Mohsine and Boudi El Mustapha Control Strategies of PMSG Wind Energy Conversion System Based on Five Level NPC Converter (ID-69) Youssef Errami, Abdellatif Obbadi, Mohammed Ouassaid and Mohamed Maaroufi Control of PMSG WECS based on DTC and backstepping algorithm Youssef Errami, Abdellatif Obbadi, Smail Sahnoun, Mohammed Ouassaid and Mohamed Maaroufi (ID-170) Comparison of Power Control Methods of DFIG for Wind Turbines (ID-204) Madiha El Ghamrasni, Hassane Mahmoudi, Ahmed Lagrioui and Badre Bossoufi Modeling and Power Control of Wind Conversion Energy Systems Based on Doubly Fed Induction Generator (ID-299) Manale Bouderbala, Badre Bossoufi, Ahmed Lagrioui, Mohammed Taoussi and Yasmine Ihedrane An improved control strategy for DFIG wind turbine to ride- through voltage dips (ID-300) Ahmed Lazrak and Ahmed Abbou GIS BASED MCDA FOR RENEWABLE ENERGY SITES SELECTION : COMPARATIVE STUDY (ID-330) Fatma Elmahmoudi, Oum Elkheir Abra and Abdelhadi Raihani LQR Controller Design for a Nonlinear, Doubly Fed Induction Generator model (ID-339) Hicham El Azri, Ahmed Essadki and Tamou Nasser Feasibility study of a wind farm in the El Golea region in the Algerian Sahara (ID-346) Sabiha Kheder-Haddouche and Sidi Mohamed Boudia Analysis and Control of the Wind Turbine in Different Operation Modes (ID-393) Abdeldjalil Dahbi, Abdellatif Reama and Adel Mehdi A new study of direct-driven wind energy conversion system under variable wind speed (ID-398) Khayra Roummani Performance Evaluation of Fixed and Sun Tracking Photovoltaic Systems (ID-277) Mohammed Elibrahimi, Abdellatif Elmouatamid, Mohamed Bakhouya, Kawtar Feddi and Radouane Ouladsine Numerical Analysis of baffles effect on thermal storage capacity inside hot water storage tank (ID-358) Baissi Mohamed Tahar, Touafek Khaled, Khanniche Rachid, Boutina Ilyes and Khelifa Abdelkarim Numerical Investigation on the Flow Field around a Wind Turbine Nacelle Anemometer (ID-324) Madjid Tata and Arezki Smaili Electrification of Rural and Arid Areas by Solar Energy Applications. Case study : Boumhaout Village in South of Morocco (ID-353) Brahim Hachim, Dounia Dahlioui and Abdelfettah Barhdadi Solar Water Pumping Applications in Morocco: State of the Art (ID-268) Khalid Mergoul, Bouchra Laarabi and Abdelfettah Barhdadi Experimental Simulation of the Effect of Soiling on a Solar PV Glass (ID-269) Bouchra Laarabi, Mehdi Rhourri and Abdelfettah Barhdadi Preventive solutions reducing the impact of soiling on PV panels: Correlation of soiling distribution with solar glass transmittance (ID-78) Soukaina Medaghri Alaoui, Salma El Ayane and Abdelfettah Barhdadi Numerical approach of Magnetic and viscous diffusivity in a heat exchanger cooled by a non-Newtonian fluid (ID-261) Ali Tetbirt, Mohammed Ali Djebiret, Mahdi Mokrane, Mammer Ouali, Mohand Berdja and Ferhat Yahi Wind energy resource assessment at three sites in the Algerian highlands (ID-390) Rachid Maouedj, Miloud Benmedjahed, Djamel Saba, Brahim Barbaoui, Abdelkrim Mammeri, Touhami Ghaitaoui and Slimane Laribi Technical and economic analysis of wind turbine system for isolated location at Adrar in Algeria (ID-36) Benmedjahed Miloud and Rachid Maouedj Laboratory erosion simulation of antisoiling glass mirror(ID-343) Amal Matal, Sanae Naamane and Hassan Bouaouine

Posters Session II

Chairs: Saad Baradiy, iproplan Planungsgesellschaft mbH, Germany

Hassan El Bari, Faculty of Science, Kenitra, Morocco Brahim Benhamou, Faculty of Science, Marrakech, Morocco

Supervising PV/Battery/Diesel System Connected to Grid using Fuzzy Logic (ID-127) Taoufik Laagoubi and Mostafa Bouzi The study of bolted sandwich structure used for electric vehicles (ID-176)

24


Thursday 16:15 – 17:00

Thursday 16:15 – 17:00

Soukaina Ounss, Hamid Mounir, Abdellatif El Marjani High physical parameters adjustment of the npp+ solar cell structure using PC1D (ID-44) Hamza Mokhliss and Khalid Rais Fuzzy Logic Controller to Improve Photovoltaic Water Pumping System Performance (ID-45) Abdelhak Bouchakour, Abdelhalim Borni, Layachi Zaghba, Sief Eddine Boukebbous and Mostéfa Brahami The Processing of active infrared thermography data by a hybrid neural algorithm for the evaluation of thermal barrier coating thicknesses (ID-79) Hicham Halloua, Ahmed Elhassnaoui, Smail Sahnoun, Abdellatif Obbadi, Youssef Errami, Abderrahim Saifi and Asseya El-Amiri Performance of Statcom in a Power Grid (ID-158) Ethmane Mahmoud, Maaroufi Mohammed, Abdel Kader Mahmoud and Amed Yahfdhou Specific electricity consumption optimization of raw grinding workshop in a Moroccan cement plant (ID-213) Fahd Belmajdoub and Souad Abderafi Energy Yield and Efficiency Assessment of Photovoltaic Grid-Tied System: Outdoor Approach (ID-234) Mohamed Boulaid, Rachida Oaddi and Ahmed Ihlal Parametric Study of Thermal renovation of an administrative building envelope in region of Chefchaouen (Morocco) (ID-236) Safar Said, Lamrani Abdelghafour and Rougui Mohamed The Performances of Hybrid Filter in Elimination of AC-AC Converters Harmonics Pollution (ID-327) Ibtissam Bessadet and Hamza Tedjini Thermal insulation and operation by photovoltaic solar energy of a bioreactor (ID-19) Mohamed Ouakarrouch, Fatima Kifani-Sahban, Najma Laaroussi, Mohammed Garoum and Samir Men Layakhaf Examination of Some Eco-Friendly Compounds, Extracted from Algal Biodiesel as Environmental Natural Inhibitors for Mild Steel Corrosion (ID-54) Djamel Daoud and Djillali Ghobrini Cultivation of Chlorella vulgaris using saline medium from a dairy effluent (ID-342) Djillali Ghobrini, Tomas Branyik, Bastien Poutout Benefits of the regulation of energy efficiency in Mexico (ID-29) Silvia Arias Formulation and thermal potentials of an eco-material for civil engeneering (ID-85) Fati Zoma and David Yemboini Kader Toguyeni Impact of building's orientation and insulation on energy consumption-case study in the six thermal zones of morrocco using TRNSYS software (ID-193) Imane Srhayri and Abdellah Bah A Thermo-Economic Analysis of solar energy-based heating systems for greenhouse application (ID-257) Yasmine Achour and Driss Zejli Numerical Approach to Thermal Control of Buildings with Integrated Phase Change Materials (ID-344) Kawtar Berrada, El Boukili Ghita and Asmae Khaldoun Optimization of the Fuzzy MPPT Controller by PSO for the Single-Phase Grid-Connected Photovoltaic System Controlled by Sliding Mode (ID-185) Abdelhalim Borni, Abdelhak Bouchakour, Layachi Zaghba and Thameur Abdelkrim Effect of the Charges Injection Contact on the Performance of Organic Light Emitting Diode (OLED) (ID-17) Samira MEHDI, Abdelkader AISSAT An optimal radius of influence domain in element-free Galerkin method (ID-56) Imane Hajjout, El Mostapha Boudi and Manal Haddouch Substrate effect on InGaN optoelectronic properties (ID-241) Wafa Bellil, Abdelkader Aissat, Jean Pierre Vilcot Numerical simulation of FSI model for energy harvesting from ocean waves and beams with piezoelectric material (ID-212) Yassin Belkourchia, Hamzah Bakhti and Lahcen Azrar Modeling of lead acid and lithium ion batteries used in PV system (ID-57) Achaibou Nadia and Saoudi Bilel Modeling and simulation of direct coupling of an electrolyzer to PV system for hydrogen production (ID-83) Rajae Gaamouche, Amine Abbou, Redouane Abdelbari, Abdennebi El Hasnaoui, Imad Harraki and Bouchra Belhorma A New Solar and Mobile Desalination Unit with Enhanced Reverse Osmosis Technique and Electrical Optimisation (ID-404) Meryem Bachar, Ahmed Naddami, Ahmed Fahli and Mohamed Hilal A Review on Distribution System State Estimation Techniques (ID-155)

25


Meriem Majdoub, Jamal Boukherouaa, Bouchra Cheddadi, Abdelaziz Belfqih, Omar Sabri and Touria Haidi Supervisory of a domestic electrical plant based on Ethernet network (ID-173) Gabriel Jean Philippe Tevi, Abdourahimoun Daouda, André Ibrahim Foulani and Amadou Hassane Seidou Maiga Distributed Voltage and Frequency Control of Islanded AC Microgrids (ID-321) Mohamed Ghazzali and Mohamed Haloua Proton Exchange Membrane Fuel Cell modelling and power control by P&O algorithm (ID-220) Naseri Nisrine and El Hani Soumia Hybrid PEM Fuel-Cell-Diesel-Solar Power System Design with Fuzzy Battery Management System and

Weather Forecasting for Electric Boats (ID-395)

Waleed Obaid, Abdul-Kadir Hamid and Chaouki Ghenai Hybrid Power System Design for Electric Boat with Solar Irradiance Forcasting (ID-65) Abdul Kadir Hamid, Walid Obaid and Chaouki Ghanai Effect of temperature and thickness of the weld bead on the durability of welded rectangular profiles under damped loads for electrical vehicles utilization (ID-76) Imane Amarir, Hamid Mounir and Abdellatif Elmarjani The effect of external boundary conditions and operating parameters on the hydrogen storage performance in a metal hydride storage tank (ID-371) Yasmina Kerboua Ziari and Allal Babou A Comparative Study Analysis And Evaluating MPPT Efficiency With Different DC-DC Converter Topologies For Photovoltaic Power System.(ID-144) Birane Mouhoub, Cherif Larbes, Ali Cheknane Residential Microgrid Load Management and Optimal Control in grid Connected and Islanded Mode(ID-46) Mohammed Laour, Douadi Bendib and Akel Fethi

Local Posters

Chairs:

Tamou Nasser, ENSIAS, Rabat, Morocco

Friday 11:15 – 11:45

Effect of the Anti-Reflective Coating (SiO2 Monolayer / 94% (380nm -1100 nm)) of Solar Glass in the Performance of CONDOR Solar PV Module (ID-27) Sebaa Bilal Study of a solar cell with a multilayered window based on Si (1-x) Ge (X). (ID-143) Abdelkrim Talhi, Houcine Aissani, Khelifa Hami and Benmousssa Dennai Design and realization of an electrical module of control and energy management for hybrid energy systems photovoltaic - Networks electrical - generator (ID-320) Si Tayeb Abdelkader, Rezzak Daoud and Houam Yahia VALUATION OF MILL SCALE AS ANTICORROSIVE PIGMENT (ID-426) Belgacem Bezzina and Mohamed Tayeb Abedghars Analysis and impact of the measures of soil temperature inside/outside in solar greenhouse: case of ghardaïa site (ID-366) Salah Bezari, Amine Bekkouche, Mohammed Aissa and Ahmed Benchatti Impact of the operation of wind turbines on human health. (ID-380) Hamdaoui Raouf, Slimani Sabrina, Farah Lotfi and Benretem Abdelouahab The Use of Plant in Scaling Inhibition Process (ID-413) Hassiba Teghidet, Lila Chaal and Bilal Ziani PH efficiency in the anaerobic digestion of sludge from the urban wastewater treatment plant in the city of Hassi R'mel (southern Algeria) (ID-345) Siboukeur Hicham and Touzi Abdelkader Analysis the Performance of Direct Power Control Applied in Two- and Three-Level PWM Rectifiers (ID-347) Ihssen Hamzaoui, Farid Bouchafaa and Saida Boukhalfa Optimisation de l'énergie dans les stations de dessalement d'eau de mer (ID-384) Bouziane Mohamed Tewfik Liquid Desiccant Property of Air Conditioning Systems(ID-294) Zahra Neffah and Mohamed Abbas

26


IRSEC’18 Venue

Dawliz Resort & Spa (5* Hotel)

A dedicated conference space is allocated to IRSEC’18:

1 plenary room, 3 session rooms, 1 Posters area, 1 meeting space, and 1 covered exhibition

area

Plenary room Exhibition area

Address : Avenue du Prince Héritier, Bouregreg – Rabat, Morocco.

27


Rabat Airport <–> IRSEC’18 Venue 7,9 km

13 min

The nearest Railway Station

(Gare de Salé)

The nearest Tramway Station

(Station Bab Lamrissa)

1,3 km

4 min 0,8 km

11 min

28


Presentation guidelines:

All presentations should be in English.

The time provided for oral presentations is 15 min (10 min for the presentation and 5

min for discussion).

The speakers should give their slides to the session chair before the beginning of each

session.

For poster presentations, the posters should be displayed one hour before the

beginning of the poster session and any explanation required should be provided to

session chairs and visitors.

Program and useful informa on - med-space.org · Filippo De Angelis, University of Perugia (Italy)...

Documents

Transcript of Program and useful informa on - med-space.org · Filippo De Angelis, University of Perugia (Italy)...