Profile Cladding brochure - ESI.infocms.esi.info/Media/documents/RigiS_Alumprofiledclad_ML.pdf · 4...
Transcript of Profile Cladding brochure - ESI.infocms.esi.info/Media/documents/RigiS_Alumprofiledclad_ML.pdf · 4...
March 2006
(47) NhCI/Sfb
Aluminium & Steel Profiled Cladding Systems
(47) NhCI/Sfb
RIGIDALPROFILEDCLADDING
requirement Rigidal are able to offer bothsmooth and crimp curved options together withprofiled closure pieces, flashings and mitredunits.
Offering the ultimate in design flexibility, Rigidalprofiled cladding is available in a wide range ofcolours and finishes.
Product SelectionPlease use the table below to select the claddingprofile that best meets your requirements.Full details on each profile are given in thefollowing pages.
Rigidal Industries manufacture an extensiverange of aluminium and steel profiled claddingsystems for use in a variety of roof, wall andlining applications. The range of trapezoidaland sinusoidal profiles together with secret fixlining systems provide the specifier andcontractor with an unbeatable choice of cost-effective cladding solutions to meet the mostchallenging of performance specifications.
Creative building design often requires asoftness of line and detail of feature that can'talways be achieved with traditional profiledsheeting and flashing design. To meet this
RIGIDAL PROFILEDCLADDING - Aluminium & steel profiled cladding systems2
**Can be smooth curved *Can be crimp curved
Type C Type A Type B
Product Reference Broad Rib Face Narrow Rib Face Narrow Rib Face
Supported Side Lap Supported Side Lap Unsupported Side Lap Page No.
19/76/1067 (‘S’ Type) ✘ ✘ ✓ ** 3
20/100/1000 (MM10) ✓ ✓ ** ✓ ** 4
20/125/1000 ✓ * ✓ * ✓ * 4
20/200/1000 ✓ * ✓ * ✓ * 5
20/300/900 ✓ ✘ ✘ 5
32/167/1000 ✓ * ✓ * ✓ * 6
38/152/914 (R38/WA6) ✓ * ✓ * ✓ * 7
38/200/1000 ✓ ✘ ✓ * 7
40/143/1000 ✓ * ✓ ✓ 8
45/152/914 (WB6) ✓ ✘ ✓ * 8
50/167/1000 ✓ * ✓ ✓ * 9
65/152/762 ✘ ✓ * ✓ * 9
The Rigidal Range of Profiled Cladding
*Shorter/longer lengths available but may be subject to additional cost. Please contact Rigidal for further details.
Roof Cladding Liner Soffit
A general purpose sinusoidal cladding sheetdesigned for use in a variety of applications.The symmetrical profile is ideal for forming intosmooth curves. In exposed situations, it isrecommended that two corrugation side lapsbe used, reducing the effective cover widthto 991mm. Only available with an unsupportedside lap.
3
Nominal Typical Effective Minimum Sheet Recommended
Material Gauge Weight Cover Roof Length Side Lap
(mm) (kg/lm) Width (mm) Pitch (m) Stitching Centres
0.5 1.70 5-10° sealed and stitchedAluminium 0.7 2.36 @ 300 mm centres
0.9 3.06 1067/991 5° 1.5 to 15* 10-15° sealed and stitched0.5 4.89 @ 450 mm centres
Steel0.7 6.86 >15° unsealed and stitched
@ 450 mm centres
1067mm
76.2mm
19mm
25mm 25mm991mm
✓ ✓ ✓
Unsupported side lap
Rigidal 19/76/1067 & 19/76/991 (‘S’ Type)
RIGIDAL PROFILEDCLADDING - Aluminium & steel profiled cladding systems4
*Shorter/longer lengths available but may be subject to additional cost. Please contact Rigidal for further details.
Nominal Typical Effective Minimum Sheet Recommended
Material Gauge Weight Cover Roof Length Side Lap
(mm) (kg/lm) Width (mm) Pitch (m) Stitching Centres
0.5 1.70 5-10° sealed and stitchedAluminium 0.7 2.38 @ 300 mm centres
0.9 3.06 1000 5° 1 to 15* 10-15° sealed and stitched0.5 4.90 @ 450 mm centres
Steel0.7 6.86 >15° unsealed and stitched
@ 450 mm centres
Roof Cladding Liner Soffit
A lightly profiled sheet which is ideal for domesticroofing and cladding, canopy soffits, fascias,parapets and small span applications. It is particularlysuited for use as a lining sheet with the RigidalZiplok standing seam roofing system and can besupplied smooth curved. Available fully perforated,with a supported or unsupported side lap.
*Shorter/longer lengths available but may be subject to additional cost. Please contact Rigidal for further details.
Rigidal 20/125/1000
Nominal Typical Effective Minimum Sheet Recommended
Material Gauge Weight Cover Roof Length Side Lap
(mm) (kg/lm) Width (mm) Pitch (m) Stitching Centres
5-10° sealed and stitched
Aluminium0.7 2.38 @ 300 mm centres0.9 3.06 1000 5° 1 to 15* 10-15° sealed and stitched0.5 4.90 @ 450 mm centres
Steel0.7 6.86 >15° unsealed and stitched
@ 450 mm centres
Roof Cladding Liner Soffit
A discretely profiled sheet that is ideal fordomestic roofing and cladding, canopy soffits,fascias, parapets and small span applications. It iscompatible with three other metric profiles in theprofiled cladding range making it a perfect liningsheet for cost-effective twin skin applications.Available webb or fully perforated with a supportedor unsupported side lap.
1000mm
100mm
19.1mm
25mm 25mm43mm
1000mm
125mm
20mm
25mm 25mm73.8mm
✓ ✓ ✓ ✓
✓ ✓ ✓ ✓
Supported side lap
Supported side lap
Rigidal 20/100/1000 (MM10)
5
*Shorter/longer lengths available but may be subject to additional cost. Please contact Rigidal for further details.
Roof Cladding Liner Soffit
Designed for use as a soffit lining sheet forforecourt canopies Rigidal 20/300/900 has theaesthetics of a secret fix system at the cost of aprofiled sheet. The 900mm cover width isavailable fully perforated with an unsupported sidelap.
Rigidal 20/300/900
Nominal Typical Effective Minimum Sheet Recommended
Material Gauge Weight Cover Roof Length Side Lap
(mm) (kg/lm) Width (mm) Pitch (m) Stitching Centres
Aluminium 0.7 1.910.9 2.46 900 5° 1 to 15*
Please contact our
0.5 3.93 Technical Department
Steel 0.7 5.50 for guidance
*Shorter/longer lengths available but may be subject to additional cost. Please contact Rigidal for further details.
Roof Cladding Liner Soffit
A general purpose roof cladding sheet forapplications where the loading/span requirementsare kept to a minimum. The 1000mm cover widthprovides an extremely cost-effective solution.Available with a supported or unsupported sidelap, also with flat pan if required.
Nominal Typical Effective Minimum Sheet Recommended
Material Gauge Weight Cover Roof Length Side Lap
(mm) (kg/lm) Width (mm) Pitch (m) Stitching Centres
5-10° sealed and stitched
Aluminium0.5 1.57 @ 300 mm centres0.7 2.20 1000 5° 1 to 15* 10-15° sealed and stitched0.5 4.50 @ 450 mm centres
Steel0.7 6.29 >15° unsealed and stitched
@ 450 mm centres
1000mm
200mm
20mm
30mm 30mm30mm 20mm 142mm
900mm
20mm
300mm 30mm
✓ ✓ ✓
✓ ✓ ✓
Supported side lap
Unsupported side lap
Rigidal 20/200/1000
RIGIDAL PROFILEDCLADDING - Aluminium & steel profiled cladding systems6
*Shorter/longer lengths available but may be subject to additional cost. Please contact Rigidal for further details.
Nominal Typical Effective Minimum Sheet Recommended
Material Gauge Weight Cover Roof Length Side Lap
(mm) (kg/lm) Width (mm) Pitch (m) Stitching Centres
0.5 1.70 5-10° sealed and stitchedAluminium 0.7 2.38 @ 300 mm centres
0.9 3.06 1000 5° 1 to 15* 10-15° sealed and stitched0.5 4.90 @ 450 mm centres
Steel0.7 6.86 >15° unsealed and stitched
@ 450 mm centres
Roof Cladding Liner Soffit
A cost-effective roof sheet for small spans and lightloadings that can be supplied with or without asupported side lap. Rigidal 32/167/1000 can also beused for vertical cladding where the outward facingbroad ribs give a striking visual effect. For thisapplication the side lap is reduced to make it amore economic option.
1000mm
167mm
32mm
25mm 25mm101mm
✓ ✓ ✓ ✓
Supported side lap
Rigidal 32/167/1000
7
*Shorter/longer lengths available but may be subject to additional cost. Please contact Rigidal for further details.
Roof Cladding Liner Soffit
Recognising the requirement for a 1000mm wideprofiled sheet, Rigidal 38/200/1000 uses thetrapezoidal design of Rigidal 38/152/914 in thiswider format. Whilst the loading characteristics areslightly lower than the Rigidal 38/152/914, the1000mm cover width provides an extremely cost-effective solution. Available webb or fullyperforated, with a supported or unsupported sidelap, also with flat pan if required.
Rigidal 38/200/1000
Nominal Typical Effective Minimum Sheet Recommended
Material Gauge Weight Cover Roof Length Side Lap
(mm) (kg/lm) Width (mm) Pitch (m) Stitching Centres
0.5 1.70 5-10° sealed and stitched
Aluminium0.7 2.38 @ 300 mm centres0.9 3.06 1000 5° 1 to 15* 10-15° sealed and stitched1.2 4.08 @ 450 mm centres
Steel0.5 4.90 >15° unsealed and stitched0.7 6.86 @ 450 mm centres
*Shorter/longer lengths available but may be subject to additional cost. Please contact Rigidal for further details.
Roof Cladding Liner Soffit
A versatile cladding sheet that can be used forboth roofing and vertical applications. For roofingapplications it provides a cost-effective andstructurally sound solution that is easy to fix. Forvertical applications the side lap detail is modifiedand the profile is used with the reverse sideoutward to give a bold visual effect. Available witha supported or unsupported side lap.
Nominal Typical Effective Minimum Sheet RecommendedMaterial Gauge Weight Cover Roof Length Side Lap
(mm) (kg/lm) Width (mm) Pitch (m) Stitching Centres
0.5 1.70 5-10° sealed and stitched
Aluminium0.7 2.38 @ 300 mm centres0.9 3.06 914 5° 1 to 15* 10-15° sealed and stitched1.2 4.08 @ 450 mm centres
Steel0.5 4.90 >15° unsealed and stitched0.7 6.86 @ 450 mm centres
914mm
152.4mm
38.1mm
19mm 19mm82mm
1000mm
200mm
38mm
19mm 19mm
✓ ✓ ✓ ✓
✓ ✓ ✓
Supported side lap
Unsupported side lap
For a supported side lap detail please contact our Technical Department
Rigidal 38/152/914 (R38/WA6)
RIGIDAL PROFILEDCLADDING - Aluminium & steel profiled cladding systems8
*Shorter/longer lengths available but may be subject to additional cost. Please contact Rigidal for further details.
Nominal Typical Effective Minimum Sheet Recommended
Material Gauge Weight Cover Roof Length Side Lap
(mm) (kg/lm) Width (mm) Pitch (m) Stitching Centres
5-10° sealed and stitched
Aluminium0.7 2.61 @ 300 mm centres0.9 3.35
10005° 1 to 15* 10-15° sealed and stitched
0.5 4.91867
@ 450 mm centresSteel
0.7 6.87 >15° unsealed and stitched@ 450 mm centres
Roof Cladding Liner Soffit
A general purpose roof and cladding sheet suitablefor most span and loading requirements. A specialside lap detail with integral drainage channelprovides extra protection against roof leaks. Lapsshould still be sealed and the special eaves toridge fixing sequence strictly followed. Availablewith a supported or unsupported side lap.
*Shorter/longer lengths available but may be subject to additional cost. Please contact Rigidal for further details.
Rigidal 45/152/914 (WB6)
Nominal Typical Effective Minimum Sheet Recommended
Material Gauge Weight Cover Roof Length Side Lap
(mm) (kg/lm) Width (mm) Pitch (m) Stitching Centres
5-10° sealed and stitchedAluminium 0.7 2.27 5° @ 300 mm centres
0.9 2.92 914 (4° in 1 sheet 1 to 15* 10-15° sealed and stitched0.5 4.87 ridge to eaves) @ 450 mm centres
Steel 0.7 6.82 >15° unsealed and stitched@ 450 mm centres
Roof Cladding Liner Soffit
Similar in profile to Rigidal 38/152/914, but with aprofile depth of 44.5mm, Rigidal 45/152/914 has afar superior spanning capacity and is ideal wheregreater loadings are required. Rigidal 45/152/914 isavailable webb or fully perforated, with a supportedor unsupported side lap.
914mm
152.4mm
44.5mm
21mm 21mm41mm
1000mm
142.9mm
40mm
25mm 25mm64.9mm
✓ ✓ ✓ ✓
✓ ✓ ✓
Supported side lap
Unsupported side lap
Rigidal 40/143/1000
9
*Shorter/longer lengths available but may be subject to additional cost. Please contact Rigidal for further details.
Roof Cladding Liner Soffit
A deep profile intended for roofing applicationswhere strength, rigidity and depth of drainagechannel are the main criteria. The deep profile ofRigidal 65/152/762 gives a bold appearance and anaesthetically pleasing shadow line. Available with asupported or unsupported side lap.
Rigidal 65/152/762
Nominal Typical Effective Minimum Sheet Recommended
Material Gauge Weight Cover Roof Length Side Lap
(mm) (kg/lm) Width (mm) Pitch (m) Stitching Centres
5-10° sealed and stitchedAluminium 0.9 2.96 5° @ 300 mm centres
1.2 3.94 762 (4° in 1 sheet 1 to 15* 10-15° sealed and stitched0.5 4.77 ridge to eaves) @ 450 mm centres
Steel 0.7 6.68 >15° unsealed and stitched@ 450 mm centres
762mm
152.4mm
63.5mm
29mm 29mm29mm
*Shorter/longer lengths available but may be subject to additional cost. Please contact Rigidal for further details.
Roof Cladding Liner Soffit
A robust heavy-duty roofing and wall sheet which isparticularly suitable for large spans or heavy loadapplications. The design incorporates an integraldrainage channel to provide extra protection againstroof leaks. Laps should still be sealed and the specialeaves to ridge fixing sequence strictly followed.Available with a supported or unsupported side lap.
Nominal Typical Effective Minimum Sheet Recommended
Material Gauge Weight Cover Roof Length Side Lap
(mm) (kg/lm) Width (mm) Pitch (m) Stitching Centres
0.7 2.68 5-10° sealed and stitchedAluminium 0.9 3.45 1000 5° @ 300 mm centres
1.2 4.59 (4° in 1 sheet 1 to 15* 10-15° sealed and stitched0.5 4.91
833 ridge to eaves) @ 450 mm centresSteel 0.7 6.87 >15° unsealed and stitched
@ 450 mm centres
1000mm
166.7mm
50mm
25mm 25mm75.2mm
✓ ✓ ✓
✓ ✓ ✓
Supported side lap
Supported side lap
Rigidal 50/167/1000
RIGIDAL PROFILEDCLADDING - Aluminium & steel profiled cladding systems10
149.6mm13.1mm
15.3mm
18.2mm
17.8mm6mm
8.5mm7mm6.2mm
18mm
2.4mm 3.6mm
Riblok 150R
*Shorter/longer lengths available but may be subject to additional cost. Please contact Rigidal for further details.
Rigidal Riblok
Nominal Typical Effective Cover Sheet
Material Gauge (mm) Weight (kg/lm) Width (mm) Length (m)
Riblok 150 Aluminium 0.7 0.56 150 1 to 15*
Riblok 200 Aluminium 0.9 0.72 200 1 to 15*
Riblok 300 Aluminium 0.9 0.97 300 1 to 15*
Roof Cladding Liner Soffit
The RigidalRiblok range of
secret fix claddingwas initially developed for
the petroleum industry toprovide a durable and low
maintenance soffit lining for forecourtcanopies. The aesthetically pleasing and
clean lines proved so successful that theproduct application has been extended to cover
internal soffit applications, fascias and externalwall design.
Available in widths of 150, 200 and 300mm Riblokprovides a cost-effective solution for both
newbuild and refurbishment projects. Riblok 150,200 and 300 are available with two facade profiles(R&F) and can be interchanged to create a numberof aesthetically pleasing designs.
The Riblok panels are fixed in place by using aconcealed carrier system that is fixed to thesubstrate. The Riblok panels are simply snappedinto place together with mineral fibre insulation inthe void behind the exterior façade depending onthermal requirements. Work can commence fromeither edge of the cladding area, working across inthe same direction until complete.
See also Rigidal 20/300/900 on page 5 for soffitlining.
299.4mm13.1mm
15.3mm
18.2mm
17.8mm6mm
8.5mm7mm6.2mm
18mm
300mm
Aluminium orgalvanised steel
carrier
2.4mm 3.6mm
200mm13.1mm
15.3mm
18.2mm
17.8mm6mm
8.5mm7mm6.2mm
18mm
2.4mm 3.6mm
299.4mm13.1mm
15.3mm
18.2mm
17.8mm6mm
8.5mm7mm6.2mm
18mm
2.4mm 3.6mm
149.6mm13.1mm
15.3mm
18.2mm
17.8mm6mm
8.5mm7mm6.2mm
18mm
2.4mm 3.6mm
✓ ✓
Riblok 150F
Riblok 300F
Riblok 200F
Riblok 300R
11
Fire PerformanceThe Rigidal range of profiled cladding achieves thefollowing results that enable them to achieve aClass O rating as classified by BuildingRegulations.
Acoustic PropertiesA variety of systems to enhance the acousticproperties of the Rigidal profiled cladding rangein terms of sound deadening and reverberationare available. For further information, pleasecontact our Technical Department.
Standards & ApprovalsRigidal profiled cladding is produced to thehighest quality standards including BS EN ISO9001: 1994. Products have been designed tofulfil a specific application and have beenmanufactured to precise standards andtolerances.
Certificate No: 910442/A
Guarantees & WarrantiesRigidal Industries will provide a product warrantyand guarantee on the internal and external coatingson a project by project basis. For furtherinformation, please contact our TechnicalDepartment.
PackagingRigidal profiled cladding in steel is bundled andstrapped with protective timbers top andbottom. aluminium profiled cladding is packed inthe same way but with the addition of polythenewrapping.
DeliveryUnless otherwise indicated all deliveries are byroad transport, direct to the project site. Shippingby sea freight is subject to an additional cost.
Storagestorage on site prior to installation must be in acompletely dry environment to avoid corrosionoccurring between the sheets.
Site InstallationFor instructions on site installation pleasecontact our Technical Department.
Metal FacingsRigidal profiled cladding is available in either 300series aluminium or pre-painted Z275 galvanisedsteel with the following finishes. Most productsare also available in other substrates such ascopper and stainless steel. Please contact Rigidalfor further information.
Stucco embossed plain mill finish aluminium
– ‘Plain mill finish aluminium is normallyexpected to last the life of the building withoutmaintenance’- BS 5427: 1976
ARS – Abrasion resistant coating for aluminiumwith good handling characteristics providing along-term aesthetic life of approximately 15years.
PVF2 – provides a long-term aesthetic life ofapproximately 20 years on aluminium, offeringexcellent durability and colour stability. Alsoavailable as a steel finish with a minimum life tomaintenance of 15 years due to the steelsubstrate.
Plastisol – high performance coating for steelsubstrates.
Polyester – a cost effective colour coating witha medium term life for both aluminium and steel.
Durability of CoatingsThe durability of a metal coating is determinedby geographical location, local environment andthe colour selected. The information given aboveis intended as a general guide for locations in theUK. For further information please contact ourTechnical Department or the relevant coatingsmanufacturer.
Rigidal Industries reserve the right to amend product specificationswithout prior notice. The information and technical details included in thisbrochure are included as a guide only. For further information, pleasecontact our Technical Department.
Test ResultBS476 : Part 3 : 1975External fire exposure FAA/SAAroof testBS476 : Part 7 : 1997 Class 1 Rating forTo determine the aluminium/steelclassification of the surface metal facingsspread of flame of products
001
•LL
OY
D’S
REG
ISTER QUALITY
AS
SUR
AN
CE
I S O 9 0 0 1
Product Properties
Rigidal Systems LimitedUnit 62, Blackpole Trading Estate West,
Worcester WR3 8ZJTel: +44 (0)1905 750500 Fax: +44 (0)1905 750555Email: [email protected]
Website: www.rigidal.co.uk
RIGIDALSYSTEMS