Proe2001 Sketcher Quick Reference Card

1
Pro/ENGINEER 2001 SKETCHER QUICK REFERENCE CARD Pro/ENGINEER 2001 SKETCHER QUICK REFERENCE CARD Please Note That the Location & Icons Shown Here For Both the Sketcher & Sketcher Tools Toolbar May Differ Based Upon Your Own System Preferences Sketcher Tools Toolbar Sketcher Toolbar Undo Redo Orient Sketching Plane Parallel to Screen Toggle Display of Dimensions On/Off Toggle Display of Constraints On/Off Toggle the Grid On/Off Toggle Display of Section Vertices On/Off Create Dimension Modify dimensions, geometry of splines, text entities Sketcher Constraints Create Text as Part of Section Perpendicular Same Points, Points on Entity or Collinear Parallel Vertical Tangent Symmetric About Centerline Horizontal Equal Lengths, Equal Radii, or Same Curvature One Item Select (hold SHIFT for more than one item) Lines Centerline Rectangle Circle w/ Concentric Ellipse center & pt Circle 3 pts / Concentric Arc by tangent at Arc Center Endpt Arc & Endpts Spline Curve Through pts. Circular Elliptical Conic Fillet Fillet Arc Points Ref Csys Entity From Offset Entity Edge From Edge Dynamic Trim Entities Divide Trim (Cut/Extend) at pt of Selection Mirror Scale & Make Rotate Copy Continue Quit By John Peng Right Mouse Button (RMB) Pull-Down Options No Items Selected w/ Items Selected

description

QR CARD FOR PRO/e 2001

Transcript of Proe2001 Sketcher Quick Reference Card

Page 1: Proe2001 Sketcher Quick Reference Card

Pro/ENGINEER 2001 SKETCHER QUICK REFERENCE CARDPro/ENGINEER 2001 SKETCHER QUICK REFERENCE CARD

Please Note That the Location & Icons Shown HereFor Both the Sketcher & Sketcher Tools Toolbar

May Differ Based Upon Your Own System Preferences

Sketcher Tools Toolbar

Sketcher Toolbar

Undo

Redo

Orient Sketching Plane Parallel to Screen

Toggle Display of Dimensions On/Off

Toggle Display of Constraints On/Off

Toggle the Grid On/OffToggle Display of Section Vertices On/Off

Create Dimension

Modify dimensions, geometry of splines, text entities

Sketcher Constraints

Create Text as Part of Section

Perpendicular

Same Points, Points on Entity or Collinear

Parallel

Vertical

Tangent

Symmetric About Centerline

Horizontal

Equal Lengths, Equal Radii, or Same Curvature

One Item Select (hold SHIFT for more than one item)

Lines Centerline

Rectangle

Circle w/ Concentric Ellipsecenter & pt Circle

3 pts / Concentric Arc bytangent at Arc CenterEndpt Arc & Endpts

Spline CurveThrough pts. Circular Elliptical Conic

Fillet Fillet Arc

Points Ref Csys

Entity From Offset EntityEdge From Edge

Dynamic Trim Entities DivideTrim (Cut/Extend) at pt of

Selection

Mirror Scale & MakeRotate Copy

Continue QuitBy John

Peng

Right Mouse Button (RMB)

Pull-DownOptions

No ItemsSelected

w/ ItemsSelected