Liq-Glass PGSpecification Sheet (Part #238515)

The Liq-Glass PG pH electrode is an entry level sensor for chemical or waste water applications and low

process temperatures.

Product Specifications

a-length 120 mm

ATEX Approval CE 0035 II 1/2 G Ex ia IIC T4/T5/T6

Autoclavable No

Certificate No

CIP No

Diameter 12 mm

Diaphragm Ceramic

Electrical Connector S8

Electrolyte Viscous 3 M KCl-LR

Liquid Earth No

Measurement Principle Combination electrode; pH potential measured against reference

Measuring Range pH 1 to 12

Medium Affected Materials Glass, EPDM

Membrane Hamilton type F glass

Membrane Shape Cylindrical

Number of Diaphragms 3

O-ring material EPDM (FDA approved)

±

× ±

5 5

±

(mm) 100 ( m 0 ) (mm) (mm) 6 / 12 3mol/L KCL S7

HAMILTON HF glass pH 0 ~ 14

15mm 1 57 ~ 59 mV / pH 25

0 20 mV 0~ 100

1 pH4.01/pH7.00

SIP CIP Autoclavable HAMILTON 3mol KCl

SlimtrodeSpecification Sheet (Part #238150)

The slim, 6 mm shaft diameter allows for measurements anywhere in the lab- even in test tubes with strong

acids.

Product Specifications

a-length 100 mm

ATEX Approval No

Certificate Yes, with measured values in Buffer pH 4.01 and pH 7.00

CIP No

Diameter 12 mm

Diaphragm Ceramic

Electrical Connector S7

Electrolyte 3 M KCl

Liquid Earth No

Measurement Principle Combination electrode; pH potential measured against reference

Measuring Range pH 0 to 14

Medium Affected Materials Glass

Membrane Hamilton type HF glass

Number of Diaphragms 1

Operating Temperature Range 0 to 100 °C

pH glass resistance Moderate

Pressure Range Atmospheric pressure

スリムトロード電極 文書番号：TCS5-33013

ProduktübersichtElectrodes for special laboratory applications

FLUSHTRODE PN 238060 Flushtrode

• Easy-to-clean, combination glass electrode with sleeve diaphragm • Ideally suited for viscous samples, ion-weak media, or media containing protein (e.g. cosmetics) • For samples containing protein, the electrolyte should be replaced with PROTELYTE (PN 238038)• Serial number, certifi cate

Specifi cations: pH: 0 to 14 T: -10 to 80°C Electrolyte: 3M KCl (refi llable) Shaft material: glass Diaphragm: sleeve diaphragm Reference system: EVEREF Temperature sensor: no Electrical connection: S7 connector head

SLIMTRODE PN 238150 Slimtrode

• pH electrode with 6 mm shaft diameter, for measurements in test tubes• Universally applicable, even in strong acids as well as in normal laboratory use• Long-term-stable EVEREF system• Serial number, certifi cate

Specifi cations: pH: 0 to 14 T: 0 to 100°C Electrolyte: 3M KCl (refi llable) Shaft material: glass Diaphragm: ceramic Reference system: EVEREF Temperature sensor: no Electrical connection: S7 connector head

FILLTRODE PN 242064 Filltrode

• Robust pH electrode with plastic shaft• Multiple applications, thanks to its fl at membrane: e.g. for viscous media• Easy to clean• The ring diaphragm prevents clogging• Serial number, certifi cate

Specifi cations: pH: 0 to 14 T: 0 to 60°C Electrolyte: SKYLYTE-CL (refi llable) Shaft material: plastic Diaphragm: ring diaphragm Reference system: EVEREF Temperature sensor: no Electrical connection: S7 connector head

GEL-GLASS PN 238025 Gel-Glass

• Maintenance-free, excellent value, pH electrode for less rigorous applications• Serial number, certifi cate

Specifi cations: pH: 0 to 14 T: -10 to 60°C Electrolyte: gel (maintenance-free) Shaft material: glass Diaphragm: ceramic Reference system: Ag/AgCl Temperature sensor: no Electrical connection: S7 connector head

ACCESSORIES ON PAGE 14

T H E M E A S U R E O F E X C E L L E N C E TM

- 8 -