Products for the Polymer Industry - UKi Media &...

Products for the Polymer IndustryMineral Oil Based Plasticizers

Technical White OilsMedicinal White Oils

Anti Ozone WaxesNative Oil Plasticizers

3 The H&R Group2 The H&R Group

H&R stands for Hansen & Rosenthal, a traditional Hamburg family firm whose chemical special product business goes back four generations. H&R, through its group member Klaus Dahleke KG, is one of the biggest suppliers of process oils for the rubber industry. A major part of the H&R product portfolio are paraffinic and aromatic label free oils.

For these oils we have a high market share in the specialised label free oil business. These products have a high impact for all parts of the tire compounds. H&R is a worldwide partner to the tire industry and has invested in refineries and service plants to achieve high service levels and standards.

Europe

GER H&R ChemPharm, Salzbergen

GER H&R OWS, Hamburg

GER Klaus Dahleke, Hamburg

GB H&R ChemPharm UK, Tipton

NL H&R Benelux, Nuth

ES H&R Spain, Madrid

FR H&R France, Lyon

PL H&R Poland, Krakow

Australia

NZ H&R Australia, Laverton

NZ H&R New Zealand, Auckland

America

BR H&R Brazil, São Paulo

US H&R Group US, Houston, TX

US H&R Group US, Baltimore, MD

US H&R Group US, Paulsboro, NJ

Africa

ZA H&R South Africa, Durban

Asia

TH H&R Thailand, Bangkok

CN H&R China, Daxie

CN H&R China, Ningbo

CN H&R China, Huizhou

CN H&R China, Fushun

CN H&R China, Shanghai

HK H&R Hong Kong, Hong Kong

MY H&R Malaysia, Port Klang

MY H&R Wax Malaysia, Batu Caves

SG H&R Singapore, Singapore

The H&R Group Where We Are

H&R Sales Office

H&R Production / Warehouse

H&R Refinery

A B C D E F G

A B C D E F G

A A

72 dB(A)

2009/... -C1

DAE

TDAE

MES

NAP

RAE

PAR

5 Basics4 Basics

1. 8 individual polycyclic aromatic hydrocarbons are limited with max. 10 ppm.

2. A marker, Benzo(a)pyrene is limited with max. 1 ppm.

3. The a. m. limits are met if the DMSO extract (IP 346) is less than 3 % as long as the correlation between the values from 1) to 3) has been proved latest every 6 months.

4. Finished tyres have to be tested by the bay proton NMR (ISO 21461).

REACH is the new European Community Regulation on chemicals and their safe use (EC 1907/2006). It deals with the Registration, Evaluation, Authorisation and Restriction of Chemical substances. The new law entered into force on 1 June 2007. All H&R products are already pre-registered. Final registration has been completed by the end of 2010.

The Directive 2005/69/EC of the European Parliament and of the Council started from 1st January 2010 as a basis for plasticizers in tyres in the EU and many other countries of the world.

The major concerns of this regulation are:

The Regulation (EC) No. 1222/2009 is scheduled for 2012. This regulation will give a direct hint to the tyre customer concerning fuel efficiency and other performance parameters. All different plasticizers have a specific impact in rolling resistance, wet and dry traction as well as abrasion resistance.

Mineral oil plasticizers are all suitable to extend rubbers and their compounds. The individual applications depend on the polarity of the oil and rubber to achieve the optimum compatibility.

That means for high styrenic compounds, e. g. tread compounds, TDAE is the optimal choice regarding low tox oils.

Plasticizers for polymers produced by H&R

arom

atic

con

tent

[%]

molecular weight [g/mol]

Polarity of plasticizers

Pola

rity

of p

olym

ers

50

25

0 200 500 1000 2000 100005000

Tyres & Technical Rubber Grades

Legal Requirements Chemical / Physical Basic Diagrams

Product Amount(phr)

Bromo butyl + NR 100,0

Carbon black N 660 60,0

Paraffinic oil 7,0

Phenolin resin 4,0

Stearic acid 1,0

DMBS 1,3

Zinc oxide 3,0

Sulphur 0,5

Product Amount(phr)

Natural rubber 60,0

High cis BR 40,0

Carbon black 55,0

ViVatec® 500 (TDAE) 6,0

Resin 3,0

Antioxidants 4,0

NegozoNe® 220 2,0

Zinc oxide 5,0

Stearic acid 2,0

CBS 0,8

Sulphur 2,1

Product Amount(phr)

SSBR, oil extended 82,5

Natural rubber 10,0

High cis BR 30,0

HD silica 80,0

Silane 6,5

Carbon black 10,0


Zinc oxide 3,0

Stearic acid 1,0

NegozoNe® 3195 1,0

Antioxidants 3,0

Accelerators 3,5

Sulphur 1,6

Innerliner Sidewall Tread

Product name Type Densityat 15 °C[kg / m3]

Viscosityat 40 °C

[cSt]

CA/CN/CP

[wt. %]

TG

[°C]

ProductionSite

tudaleN® 1968 PAR 870 31 3 / 34 / 63 - 70 EU

tudaleN® 12 PAR 878 84 3 / 33 / 65 - 70 EU

tudaleN® B 8013 PAR 881 95 2 / 33 / 65 - 70 EU

tudaleN® 3912 PAR 888 215 3 / 31 / 66 - 68 EU

tudaleN® 4529 PAR 906 800 7 / 25 / 68 - 62 EU

ViVatec® 200 MES 915 210 15 / 27 / 58 - 59 EU, AS, NA

tudaleN® 4225 MES 915 220 13 / 31 / 56 - 58 EU

ViVatec® 500 TDAE 950 410 25 / 30 / 45 - 49 EU, AS, NA

ViVatec® 180 TDAE 943 200 25 / 32 / 43 - 51 EU, AS

tudaleN® SX 500 TDAE 945 500 24 / 25 / 51 - 51 EU

tudaleN® 5138 RAE 980 3.300 34 / 28 / 38 - 40 EU, RSA, NA

ViVatec® 800 TRAE 960 800 28 / 30 / 42 - 45 AS

ViVatec® 700 NAP 953 960 20 / 36 / 44 - 46 AS

tudaleN® 3044 NAP 925 245 11 / 37 / 52 - 61 EU

PioNier® 3343 NAP 905 23 12 / 41 / 47 - 45 EU

PioNier® 4629 NAP 928 395 11 / 40 / 49 - 40 EU, NA

Further products are available on request.

Extender and processing oils for the rubber industry

PAR = ParaffinicNAP = NaphthenicMES = Mild extracted solventTDAE = Treated distillated aromatic extractRAE = Residual aromatic extract

visc

osity

at 1

00 °C

[mm

2 /s]

aromatic content [wt. %]

Table of paraffinic, naphthenic, aromatic and highly aromatic oils

AS = AsiaEU = EuropeNA = North AmericaRSA = South Africa

6 Mineral Oil Based Plasticizers 7 Mineral Oil Based Plasticizers

Sample Recipes for TYRES

Applications in TYRES TYRESProduct Range

* 23,5% Styrene, 76,5% Butadiene, 32,5 phr TDAE

Product Amount(phr)

ESBR 1723* 132,5



Resin 2,0

Stearic acid 2,0

NegozoNe® 3457 0,8

Zinc oxide 1,5

Accelerators 3,0

Sulphur 2,5

Product Amount(phr)

CR 100,0

Carbon black (HAF) 60,0

Magnesium oxide 4,0

Stearic acid 1,0

Antioxidants 3,5

NegozoNe® 3457 2,5

Zinc oxide 5,0

Accelerators 0,8

tudaleN® 5138 (rae) 35,0

Product Amount(phr)

NBR (33% ACN) 100,0

Phenolic resin 12,5

tudaleN® 5138 (RAE) 7,5

Carbon black (HAF) 45,0

Stearic acid 1,0

Antioxidants 3,5

Zinc oxide 5,0

Accelerators 1,1

Sulphur 1,3

Damping Element Axle Boot Shoe Sole

Depending on the polarity of technical rubber goods compounds different kind of oils are needed. High polar rubbers, e.g. polychloroprene, need high polar plasticizers like aromatics; unpolar rubbers, e.g. EPDM, need unpolar plasticizers like paraffinics.

Product name Type Densityat 15 °C[kg/m3]

Viscosityat 40 °C

[cSt]

CA/CN/CP

[wt. %]

Pour Point

[°C]

ProductionSite

tudaleN® 1968 PAR 870 31 3 / 34 / 63 - 15 EU

tudaleN® 12 PAR 878 84 3 / 33 / 65 - 9 EU

tudaleN® B 8013 PAR 881 95 2 / 33 / 65 - 12 EU

tudaleN® 3912 PAR 888 215 3 / 31 / 66 - 9 EU

tudaleN® 4073 PAR 899 490 5 / 27 / 68 - 9 EU

tudaleN® 4531 PAR 905 730 5 / 26 / 69 - 9 EU

PioNier® M 1930* PAR 870 72 0 / 33 / 67 - 12 EU

PioNier® M 3915* PAR 870 98 0 / 34 / 66 - 9 EU

tudaleN® 2368 N NAP 892 20 4 / 48 / 48 - 48 EU

tudaleN® 2370 N NAP 902 100 4 / 38 / 58 - 30 EU

tudaleN® 4399 NAP 903 23 10 / 45 / 45 - 36 EU

excellent conditionally compatible incompatible

EU = Europe

* FDA approved

Further products are available on request.All other types see also page 7.

PAR = ParaffinicNAP = Naphthenic

9 Mineral Oil Based Plasticizers8 Mineral Oil Based Plasticizers

Sample Recipes for TRG

Applications forParaffinic/Naphthenic Plasticizers in TRG TRGProduct Range

11 Mineral Oil Based Plasticizers

* Replacement of Phthalates

Product Amount(phr)

NBR 100,0

Zinc oxide 5,0

Stearic acid 1,0

Microcrystalline talc 70,0

Silica 10,0

Carbon black (N-774) 5,0

Magnesium oxide 5,0

Antidegradant 2,0

Antioxidant 2,0

Paraffin wax 3,0

PioNier® tP 130 B * 5,0

Accelerator 1 1,0

Accelerator 2 1,5

Dispersing agent 2,0

Curing agent 0,4

Product Amount(phr)

EPDM 100,0

Silica 100,0

Zinc oxide 5,0

Stearic acid 1,0

Paraffin wax 5,0

Plasticizer * 20,0

Accelerator 1 1,6

Accelerator 2 1,2

Accelerator 3 0,8

Curing agent 1,0

Product Amount(phr)

PVC 100,0

Untreated calk 8,0-100,0

PioNier® TP 30 J * 50,0 - 60,0

Stabilisator 1 2,5 - 5,0

Stabilisator 2 2,5 - 5,0

Oil Well CableJacket Compound Wire Coating

Product name Kin. Viscosityat 100 °C[mm2/s]

Needle Penetrationat 25 °C[mm/10]

Congealing Point

[°C]

ProductionSite

H&r Wax® 52/54 3,4 18 53,0 EU, AS

H&r Wax® 64/66 6,2 19 66,0 EU, AS

H&r Wax® P 453 7,0 60 63,0 EU

H&r Wax® P 453 DAB 7,2 70 62,0 EU

NegozoNe® 220 F 6,6 12 62,0 EU, AS

10 Mineral Oil Based Plasticizers

Ignition CableInsulation

* Paraffinic and naphthenic oils * Replacement of Phthalates

PIONIER TP 130 B and J are suitable alternatives to replace Phthalates such as e.g. DEHP (Bis(2-ethylhexyl)phthalate also known as DOP (Dioctyl phthalate), DBP (Dibutyl phthalate) or DINP (Diisononyl phthalate) inNBR and PVC compounds used in several applications. This new alternative products can achieve the samelevel or improve the properties of NBR and PVC materials. The use of PIONIER TP 130 B and J as substitutesfor traditional phthalates is feasible and helpful when meeting the new environmental standards.

Product name Type Kin. Viscosityat 40 °C[mm2/s]

Kin. Viscosityat 100 °C[mm2/s]

CA/CN/CP

[wt. %]

ProductionSite

tudaleN® c 830 PAR 32 480 8 / 25 / 67 AS

PioNier® M 1994* PAR 39,2 6,3 0 / 35 / 65 EU

PioNier® 1045* PAR 70 9,2 0 / 33 / 67 EU

tudaleN® B 8013 PAR 95 10,5 3 / 30 / 67 EU

tudaleN® D 115 PAR 118 12,3 3 / 30 / 67 EU

PioNier® M 006* PAR 490 30,8 5 / 27 / 68 EU

tudaleN® 09 NA NAP 23 3,7 10 / 45 / 45 EU

PioNier® M 006 NAP 67 7,5 0 / 42 / 58 EU

tudaleN® 81 DAE 150 9 41 / 41 / - EU, RSA

Materials based on polychloroprene (CR), chlorinated polyethylene (CM), chlorosulfonated polyethelene (CSM), nitrile butadiene rubber (NBR), hydrogenated nitrile butadiene rubber (HNBR), ethylene-propylene terpolymer (EPDM), ethylene-vinyl acetate (EVM), polyvinyl chloride (PVC) have been successfully used in wire and cable industry for a long time.

The following properties are essential for cable and wire applications:

• great electrical characteristics;• good ozone and weathering resistance;• high tensile strength and elongation at break;• good oil resistance;• good tear propagation resistance;• excellent insulation in water;• long service.

H&R offers a range of products with excellent performance and benefits for the selected application, likeplasticizers with different viscosities and waxes with various compositions.

PAR = ParaffinicNAP = NaphthenicMES = Mild extracted solventTDAE = Treated distillated aromatic extractRAE = Residual aromatic extract

AS = AsiaEU = EuropeNA = North AmericaRSA = South Africa

* FDA approved

Sample Recipes for Cables

Applications for CABLES CABLESProduct Range

M

ass

frac

tion

[%/m

/m]

Carbon Number

8

5

0 7525 50

12 Anti Ozone Waxes 13 Anti Ozone Waxes

Ozone and UV light are destroying rubber articles. That is why H&R provides a wide range of Anti Ozone Waxes for various rubber applications.

Special wax materials, added in excess of their solubility in rubbers will bloom to the surface after vulcanization. The related film provides protection against sun and Ozone cracking as long as the film remains intact. The right blend of low and high molecular weight waxes leads to an optimum in Ozone protection.

Product nameNegozoNe®Europe

Product nameNegozoNe®Asia

n-Par Iso-Par Cmax CongealingPoint[°C]

Oil Content

[wt. %]

NeedlePenetration[1/10 mm]

Viscosityat 100 °C[mm2/s]

DSC

[°C] [J/g]

ProductionSite

Ng 220 Ng 220 F 60 40 30/47 62 0,5 14 6,6 80 199 EU / AS

Ng 3509 Ng 3509 F 70 30 30 63 0,5 20 6,2 62 197 EU / AS

Ng 3457 49,9 50,1 30 65 (64 - 67) 0,4 15 6 63 193 EU

Ng 3457 M* 60 40 30 66 - 70 0,4 18 8 66 193 EU

Ng 9325 Ng 9325 F 75 25 30 63 0,4 12 4,7 63 220 EU / AS

Ng 9326 Ng 9326 F 80 20 25 67 0,5 15 5,03 70 217 EU / AS

Ng 9332 F 70 30 30 64 0,3 11 5,9 66 213 AS

Example of a typical H&R antiozone wax blend

product amount(phr)

NR 50,0

Hich CIS BR 50,0


ViVatec® 500 5,0

Zinc oxide 5,0

Stearic acid 2,0

NegozoNe® 3457 1,5

Antioxidants 3,0

Accelerators 1,3

Sulphur 1,8

product amount(phr)

SSBR 70,0

High CIS BR 30,0


ViVatec® 500 20,0

Zinc oxide 2,5

Stearic acid 1,0

NegozoNe® 3509 1,5

Antioxidants 2,0

Accelerators 1,5

Sulphur 2,0

Carbon BlackFilled Tyre Tread

Tyre Sidewall

product amount(phr)

SSBR, oil extended 82,5

High CIS BR 30,0

NR 10,0

HD Silica 80,0

Silane 6,5

ViVatec® 500 15,0

Zinc oxide 3,0

Stearic acid 1,0

NegozoNe® 9325 1,0

Antioxidants 3,0

Accelerators 3,4

Sulphur 1,6

Silica FilledTyre Tread * Modified with PE-Wax

Special custom grades are available.AS = AsiaEU = Europe

Sample Recipes for ANTI OZONE WAXES

Applications for ANTI OZONE WAXES ANTI OZONE WAXESProduct Range

15 White Mineral Oils14 White Mineral Oils

product amount(phr)

Pale crepe 50,0

ESBR 1502 50,0

Kaolin 25,0

Titaniumdioxide 3,0

Factis 15,0

NegozoNe® 220 0,6

Pigment orange 1,2

Pigment carmin 0,4

BHT 1,0

PioNier® M 1930 2,2

ZnO 4,0

Stearic acid 0,6

Accelerator 1,2

Sulphur 2,6

product amount(phr)

SEBS 100,0

Clay 50,0

Medicinal white oil 32,0

NegozoNe® 3457 1,5

Wine Cork

Food grade and medicinal applications require the highest degree of hydrofinishing. This type of oil is named medicinal white oil (WOM). Medicinal white oils are always needed if the finished article has direct contact to food (e.g. packaging films), skin (e.g. potable water sealings) and mucosa membranes (e.g. hoses for stomach tubes).

The relevant regulation is described in FDA 21 CFR178.3620 (a).

FDA 21 CFR178.3620 (b) & (c) are required for indirect food contact and/or animal food.

Product name Type Densityat 15 °C[kg/m3]

Viscosityat 40 °C

[cSt]

CA/CN/CP Evaporation Loss3h at 125 °C

[%]

FDA21 CFR 178.3620

ProductionSite

PioNier® 2076 P PAR 850 16 0 / 35 / 65 13,0 (a), (b), (c) EU

PioNier® M 1989 PAR 860 24 0 / 34 / 66 10,8 (a), (b), (c) EU




PioNier® 1136 PAR 872 200 0 / 34 / 66 < 0,1 (a), (b), (c) EU

PioNier® 2071 P PAR 870 70 0 / 33 / 67 1,1 (a), (b), (c) EU

PioNier® 2071 N NAP 882 69 0 / 45 / 55 1,1 (b), (c) EU

Further products are available on request.

Preserving Jar EU = Europe

Sample Recipes for WOM

Applications for (incl. PS/HIPS) WOM WOMProduct Range

product amount(phr)

NBR (33% ACN) 100,0

Zinc oxide 3,0



Antioxidants 4,0

Peroxide (DCP-40) 4,9

PioNier® TP 130 B* 9,0

product amount(phr)

NBR (39% ACN) 100,0

Zinc oxide 5,0

Stearic acid 1,0



Accelerators 5,9

Sulphur 0,4


Diesel FuelPump Membrane

O-Ring (Sealing)

product amount(phr)

NBR (33% ACN) 100,0

Zinc oxide 5,0

Stearic acid 1,0



Antioxidants 3,5

Peroxide (DCP-40) 6,5


LPG Resistant Hose

* Substitute for e.g. DINCH * Substitute for e.g. DINP * Substitute for e.g. DOP

Even the polymer industry and its suppliers recognize their responsibility concerning environmental prob-lems and sustainable resources. Also H&R has found a way to support the industry with new sustainable raw materials.

Based on native oils we are able to produce new plasticizers with a low carbon footprint.

17 Native Oil Plasticizers16 Native Oil Plasticizers

Product name Densityat 15 °C[kg/m3]

Viscosityat 40 °C

[cSt]

Flash Point

[°C]

Pour Point

[°C]

Glass Transition Point[°C]

ProductionSite

PioNier® TP 130 B 875 9 > 210 - 27 - 110 EU

PioNier® TP 130 C 910 13 > 210 - 12 - 90 EU

PioNier® TP 130 J 995 184 > 240 - 15 - 65 EU

EU = Europe

Sample Recipes for NATIVE OILS

Applications for NATIVE OILS NATIVE OILSProduct Range

Deutsche Akkreditierungsstelle Chemie GmbHSignatory to EA Multilateral Agreement and ILAC Mutual Recogniticion Arrangementrepresented in theDeutschen AkkreditierungsRat

AccreditationThe DACH Deutsche Akkreditierungsstelle Chemie GmbH herewith confirms that the

testing laboratory

Laboratorium für Mineralöl-, Paraffin-und Umweltanalytik derH & R Lube Tech GmbHNeuenkirchener Straße 8D-48499 Salzbergen

Labor der H&R Ölwerke Schindler GmbH

Neuhöfer Brückenstraße 127 - 152D-21107 Hamburg

DACH

H&R ChemPharm GmbHat the locations

is competent under the terms of DIN EN ISO/IEC 17025 to carry out testingin the field of:

for the analysis of: lubricants (Automotive engine oils, automotive gear oils,

This accreditation is valid until: 31.07.2010The annex is part of this certificate and comprises 26 pages.DAR-Registration number: DAC-PL-376-05-20Frankfurt (Main), 07.03.2007

Translation

Translation for information purposes only. The German Accreditation Certificate is authoritative.See notes overleaf.

medicinal white oils, tchnical white oils, paraffines and waxes,lubricating oils L-AN, circulating and industrial gear oils C, CL,CLP, heat transfer media Q, lubricants Z (cylinder oils),

mineral oil and related products

lubricants GC (slide way oils), oils FS (separating oils), shockabsorber oils, oils L (quenching and tempering oils), oils R(corrosion preventive oils), chain saw lubricants, lubricating-and controller oils, lubricants VB, VC and VDL, hydraulic oilsHL, HLP, HVLP, lubricants D (compressor oils)), marine engineoils, burning fuel (heating oils S, SA ), mineral oil (processoils), gas samples.

Dr. A. SteinhorstManaging director

�

�

�

�

�

Certificate DE09/81819544

H&R Group

The management system of

Am Sandtorkai 64, D-20457 Hamburg

Neuhöfer BrückenStraße 127-152, D-21107 Hamburg

Halskestraße 30-34, D-22113 Hamburg

has been assessed and certified as meeting the requirements of

For the following activities

Further clarifications regarding the scope of this certificate and the applicability of

ISO 14001 requirements may be obtained by consulting the organisation

This certificate is valid from 14/07/2012until 13/07/2015

Issue 2. Certified since 14/07/2009

r

This is a multi-site certification.

Additional site details are listed on the subsequent page.Authorised by

SGS-International Certification Services GmbH

Raboisen 28 D-20095 Hamburg (Germany)

t +49 (0)40 30.101.361 f +49 (0)40 33.04.096 www.de.sgs.com

Page 1 of 3

ISO 14001:2004

Neuenkirchener Straße 8, D-48499 Salzbergen

Sales, blending, manufacture, storage, distribution and development

of mineral oil products including: base oils, process and machine oils,

speciality lubricants, waxes, wax specialities and emulsions, polymer

and resin emulsions, cable compounds, petroleum jellies.

Manufacturing of chemical/pharmaceutical cosmetic raw materials and

semi-finished products , as well as services to related group of

companies. Order-based production of automotive and industrial

lubricants and operation of a hydrogen production and filling plant.

Certificate DE09/81819547

H&R GroupThe management system of





For the following activities



speciality lubricants, waxes, wax specialities and emulsions, polymer

and resin emulsions, cable compounds, petroleum jellies.

Manufacturing of chemical/pharmaceutical cosmetic raw materials and

semi-finished products, as well as services to related group of


lubricants and operation of a hydrogen production and filling plant


ISO 9001:2008 requirements may be obtained by consulting the organisation

This certificate is valid from 14/07/2012until 13/07/2015

Issue 2. Certified since 14/07/2009r

This is a multi-site certification.

Additional site details are listed on the subsequent page.

Authorised by

SGS-International Certification Services GmbH

Raboisen 28 D-20095 Hamburg (Germany)

t +49 (0)40 30.101.361 f +49 (0)40 33.04.096 www.de.sgs.com

Page 1 of 3

OHSAS 18001:2007Neuenkirchener Straße 8, D-48499 Salzbergen Certificate DE12/81839578

H&R GroupThe management system of




Neuenkirchener Straße 8, D-48499 Sallzbergen


ISO 9001:2008For the following activities



speciality lubricants, waxes, wax specialities and emulsions, polymerand resin emulsions, cable compounds, petroleum jellies.

Manufacturing of chemical/pharmaceutical cosmetic raw materials andsemi-finished products, as well as services to related group of


lubricants and operation of a hydrogen production and filling plant


ISO 9001:2008 requirements may be obtained by consulting the organisation

This certificate is valid from 8 August 2012 until 7 August 2015 and remainsvalid subject to satisfactory surveillance auditsRe certification audit due before 10 May 2015

Issue 1. Certified since 8 August 2012

This is a multi-site certification.Additional site details are listed on the subsequent page.

Authorised by

SGS United Kingdom Ltd Systems & Service Certification

Rossmore Business Park Ellesmere Port Cheshire CH65 3EN UK

t +44 (0)151 350-6666 f +44 (0)151 350-6600 www.sgs.com

SGS 9001-8 01 0311 M2

Page 1 of 5

This document is issued by the Company subject to its General Conditions of

Certification Services accessible at www.sgs.com/terms_and_conditions.htm.

Attention is drawn to the limitations of liability, indemnification and jurisdictional

issues established therein. The authenticity of this document may be verified at

http://www.sgs.com/clients/certified_clients.htm. Any unauthorized alteration,

forgery of falsification of the content or appearance of this document is unlawfuland offenders may be prosecuted to the fullest extent of the law.

18 H&R IMS

Imprint

H&R Group undertakes to do their utmost to ensure that the information provided on this documentation is free of errors. However, H&R Group cannot accept any liability nor can they guarantee that the information provided is up-to-date, accurate or complete.

H&R Group reserves the right to make amendments or additions to the information provided without notice. The content of this documentation is protected by copyright. Storage and reproduction of photographic material or graphics from this documentation is prohibited on copyright grounds.

H&R Group is not liable for any direct or indirect damage sustained as a result of or otherwise in association with information provided on this documentation.

Pictorial credits: H&R Group picture library

©2015 H&R Group, (all rights reserved)

H&R GroupAm Sandtorkai 6420457 HamburgGERMANY

Tel. +49 40 43218-0Fax +49 40 43218-400E-Mail [email protected] www.hur.com

Update: February 2015

ISO 50001:2011Energy Management System

This certification specifies the requirements for energy management systems.

DIN EN ISO 9001:2008Quality Management System

This certification specifies the requirements for quality management systems. It is now firmly estab-lished as the globally implemented standard for providing assurance about the ability to satisfy qual-ity requirements and to enhance customer satisfaction in supplier-customer relationships.

DIN EN ISO 14001:2004Environmental Management System

This certification describes the requirements for environmental management systems. It confirms its global relevance for organizations wishing to operate in an environmentally sustainable manner.

OHSAS 18001:2007Occupational Health and Safety Management System

Occupational safety and health is a cross-disciplinary area concerned with protecting the safety, health and welfare of people engaged in work or employment. As a secondary effect, it may also pro-tect co-workers, family members, employers, customers, suppliers, nearby communities, and other members of the public who are impacted by the workplace environment.

DIN EN ISO / IEC 17025:2005German Accreditation System for Testing Laboratories

The DAP‘s primary activity is the accreditation of materials testing bodies, chemical-analytical, bio-logical and medical laboratories, product certification bodies and inspection bodies in Germany and throughout Europe. Accreditated laboratories are independent from the production plant and are al-lowed to deliver expert opinions.

H&R Integrated Management System

e-mail: [email protected]

Hansen & Rosenthal KGKlaus Dahleke KGTudapetrol KGH&R WAX Company Vertrieb GmbHH&R Vertrieb GmbH

Am Sandtorkai 6420457 Hamburg, GERMANY

Tel. +49 40 43218-0Fax +49 40 [email protected]@hur.com

H&R Ölwerke Schindler GmbHNeuhöfer Brückenstr. 127-15221107 Hamburg, GERMANY

Tel. +49 40 32523-0Fax +49 40 32523-285

H&R ChemPharm GmbHNeuenkirchenerstr. 848499 Salzbergen, GERMANY

Tel. +49 5976945-0Fax +49 5976945-474

H&R ChemPharm (UK) Ltd.Dudley RoadTipton, West Midlands DY4 8EH, GREAT BRITAIN

Tel. +44 121 5220100Fax +44 121 [email protected]

H&R France7 rue Lebrun69004 Lyon, FRANCE


H&R Benelux B.V.Thermiekstraat 26361 Nuth, NETHERLANDS


H&R ANZ Pty Ltd144-152 Fitzgerald RoadLaverton NorthVictoria 3026 AustraliaP. O. Box 432, LavertonVictoria 3028, AUSTRALIA


H&R China (Ningbo) Co., Ltd., Shanghai Office汉圣石化 (宁波) 有限公司，上海办公室No. 711 Room China Coal MansionNo. 899 Dongfang Road, Pudong New District200122 Shanghai, CHINA

Tel +86 21 50585326 Fax +86 21 [email protected]

H&R China (Ningbo) Co. Ltd.宁波汉圣化工有限公司#18, 6 Chuangye RoadFree-Trade West Zone315800 Ningbo, Zhejiang, CHINA


H&R Malaysia Sdn BhdLot 6579, Jalan Parang, North PortLocked Bag No. 203, North Port42000 Port Klang, Selangor, MALAYSIA


H&R WAX Malaysia Sdn BhdLot 5, Jalan Perusahaan Dua68100 Batu CavesSelangor Darul Ehsan, MALAYSIA

Tel +60 3 61896225Fax +60 3 [email protected]

H&R ANZ Pty LtdBuilding 2, Suite B, Unit 2b5 Ceres CourtMairangi BayAuckland, NEW ZEALAND


H&R South Africa Sales (Pty) Ltd.113 Trinidad RoadIsland ViewBluff 4052, SOUTH AFRICA


H&R ChemPharm (Thailand) Ltd.B1/F5 Bangkok City Tower179 South Sathorn RoadTungmahamek, SathornBangkok 10120, THAILAND


H&R Group US, Inc.2925 Briarpark DriveSuite 1130Houston, TX 77042 USA

Tel +1 713 9559230Fax +1 713 [email protected]

Contacts H&R Group

Products for the Polymer Industry - UKi Media &...

Documents

Transcript of Products for the Polymer Industry - UKi Media &...