Products Booklet (ISAC Enterprises)

ISAC ENTERPRISES (Industrial Safety & Automation Components)

Regi. Office: New Sumthana, Triratna Society, Ta: Bhadrawati, Dist. – Chandrapur - 442 902, Maharashtra, India. Contact: Mobile:

+91 9270367704, Email ID – [email protected], [email protected], www.isac.co.in

Dear Customers,

ISAC Enterprises is a purely trading company established in 2013 and is pleased to introduce

you the following products useful for industrial safety & automation applications.

Stand alone coded electronic safety switches

No additional safety relays are required to reach SIL2 Cat.3/SIL3 CAT.4

Stand alone non contact coded safety switches. Auto control integrated.

Model: AMX • PL=d Acc. to EN ISO 13849-1

• Cat.3 acc. to EN ISO 13849-1

• SIL 2 acc. to EN62061

• 1 NO + 1 NC (AMX3) 2NO +1NC

(AMX5)

• Switching distance: 10mm • Led status display of the correct

code recognition

• Temperature -20°C to +60°C /IP67

• Double mounting brackets

• Housing in Polyamide6 or 316L Stainless Steel

Stand alone non contact coded safety switches with cylindrical design

Model: 7SSR24V • PL = c Acc. to EN ISO 13849-1

• Cat.1 acc. to EN ISO 13849-1 • 2NO 1A/48V + 1NC 24V/1A

• Switching distance: 10mm

• Led status display of the correct

code recognition


• CuNI housing M30x1,5

• Cylindrical design

Stand alone non contact coded safety switches with coded keys. Avoid an

operator to be trapped inside a dangerous area.

Model: AMX 5 • PL=d Acc. to EN ISO 13849-1



• 2NO 2A/48V + 2NC 24V/250mA


• Led status display of the correct code

recognition


• Double mounting brackets & M12 built

in M12 connector 8pin.

• Housing in Polyamide6

• Prisoner key : can work in key transfert with C4CK.

Stand alone non contact coded safety switches with a reduced size.

Model: OPTO2S • PL = c Acc. to EN ISO 13849-1 • Cat.1 acc. to EN ISO 13849-1

• 2NO 250mA/48V



recognition




• Miniature series

• Shock stress : 75G

• No discrepancy between the lines

Non-Stand alone coded electronic safety switches

Require safety relay to reach SIL2 Cat.3/SIL3 CAT.4

Small and cylindrical coded safety switches

Model :ANATOM M18 • PL = e Acc. to EN ISO 13849-1

• Cat.4 with AWAX acc to EN ISO13849-1

• 2NO + 1 NC PNP



• CuNi Housing

• M12 output

• Unlimited life expectancy

• Auxiliary for automation control or light

• M18 Cylindrical

Non contact coded safety switches with a reduced size.

Model: OPTOPUS DEC • PL = e Acc. to EN ISO 13849-1


• 2NO + 1 NC PNP



recognition





• Miniature series




Non contact coded safety switches with NC aux. output ( 78S) or NO

aux.output (98S)

Model:ANATOM 78S - 98S • PL = e Acc. to EN ISO 13849-1

• Cat.4 with AWAX acc to EN

ISO13849-1

• 78S : 2NO + 1 NC 250mA PNP

• 98S : 2NO + 1 NO 250mA PNP


• Led status display of the correct

code recognition

• Temperature -20°C to +60°C

/IP67 or IP69K



• Available with cable , mkt or M12 output

Non contact coded safety switches with a reduced size.

Model: OPTOPUSC M8 • PL = e Acc. to EN ISO 13849-1


• 2NO + 1 NC PNP



recognition




• Built in M8 connector

• Switching time 500 us

Electromagnetic Holding in 316L Stainless Steel Safety Switches.

Stand alone non contact coded safety switches with 4kg permanent

holding force.

Model : BOSTER • PL=d Acc. to EN ISO 13849-1



• Permanent Holding Force 4KG

• Decoding with Acotom3®

• Relay contacts 2A/48V with self

control

• Auxiliary for automation control or

light

• 316L Stainless STEEL housing

• Laser writing ( no INK)


• No additional safety relay necessary

Non contact coded safety switches with 2kg permanent holding force

designed to work in hard conditions.

Model: EPINUS 2 KGS • PL = e Acc. to EN ISO 13849-1


• Permanent Holding Force 2 Kg

• Decoding with Acotom2®

• Auxiliary for automation control or

light : PNP/ NC / 250 mA


IP69K


• Temperature -20°C à +90°C (EPINUS 2K)

• TEFLON Output

• Handle version with M5 screw (Epinus 2K72) :(EPINUS 2K 72)

Non contact coded safety switches for high temperature

Model: TRITHON • PL = e Acc. to EN ISO 13849-1

• Cat.4 with AWAX acc to EN

ISO13849-1

• Decoding withAcotom®2


• Misalignment : +- 30° rotation

• Using temperature : -25°C to +110°C

• Detection/hysteresis : 9 /+2 (mm)

• IP69K • Connection with cable Teflon


• Auxiliary for automation control or light

• N version : NPN/ NC /1A

• standart version : PNP/NC/1A


Non contact coded safety switches with 4kg permanent holding force

designed to work in hard conditions.

Model: EPINUS 4 KGS • PL = e Acc. to EN ISO 13849-1


• Permanent Holding Force 4KG

• Decoding with Acotom®2

• Auxiliary for automation control or light :

PNP/ NC / 250 mA

• 316L Stainless STEEL housing IP69K

• Laser writing ( no INK) • Temperature -20°C à +60°C

• Cable or MKT version

ATEX Approved Safety switches




Model: RDX8 • Access control in area 2 or area 22

• Non contact coded safety switches

with low hysteresis non contact

coded safety switches with low

hysteresis

• Auto control built in

• Must be use with an intrinsic zener

barrier with dual channel such as

our ZRX8 or Awax26XXLEEX

• Up to 30 switches in series

• Dual channel for more safety

• 2 output NO& 1 NC 50 mA 30 V max

Model: ANATOM78S PL EEX • Access control in area 2 or area 22 (

Polyamide version )

(ANATOM 78S PL EEX)

• Access control in area 1 or area 21

( Stainless version)

ANATOM 78S INOX EEX)

• Non contact coded safety switches with

low hysteresis

• System Eex SYST (iaIICT4) & ISO 13849-1

• Compliant with ATEX and machine safety

• Built in zener barrier ,

• Power Supply 24Vac/dc

• Output 3 channel NO + 1 NC 8A /250V

• Temperature -20+ 40 °C

• Gas : T4

• Dust : 135°C

Model:AWAX26XXL EEX 3 • Compliant with ATEX and machine safety

• Output 3 channel NO + 1 NC 8A /250V

• Built in zener barrier

• Compliant with EN 50020 & ISO 13849-1

• Compatible with aluminum profile

• Power supply 24 Vac/dc

Electromagnetic Holding with built-in safety switch

Model: SUPERMAGNET 1 • Performance Level (PL) = d

• Safety category = with Awax

• Steel Magnet (R version IP54 ) : locking

when energized , force 40 daN

• Stainless Steel Magnet (R version IP65)

locking when energized , force 58 daN

• Steel Magnet (E version IP54 ) : locking

when energized , force 20 daN

• Steel Magnet (E version IP65 ) : locking when energized , force 40 daN

• Polar plate on 360 ° . Can be fixed if chosen

Model: SUPERMAGNET 2 • Performance Level (PL) = d

• Safety category = with Awax

• Stainless Steel Magnet (R version

IP65 ) : locking when energized ,

force 116 daN

• Stainless Steel Magnet (E version

IP65 ) : locking when energized ,

Force 80 da

• Closed door detection using Acotom Process

• Two channels for control on Awax

• Stainless steel 316 L version. Laser printing ( no ink)

• Polar plate on 360 ° . Can be fixed if chosen

• M 12 connector in resistant metal




RFID coded Safety switches

Stand alone non contact coded safety switches using RFID. Auto

control integrated.

Model: XORFS • Performance Level (PL) = c

• safety category = with awax

• RFID system , not possible to

fraud

• Can be use in a metallic

environment

• Self control built-in. No safety

relay required • 2 NO

• Aux. Output : NC PNP 400mA

• Housing in Polyamid 6

• Self learning when first use

• 16 billion code possibility

• RFID 125 KHz

Stand alone non contact coded safety switches using RFID.

Auto control integrated.

Model: AMXRS • Performance Level (PL) = c

• Safety category = 3 & Sil 2

• RFID system , not possible to fraud.

• Can be use in a metallic environment

• Self control built-in. No safety relay

required

• 2 NO /2A 48V

• Aux. Output : NC PNP 400mA • Housing in Polyamide 6

• Self learning when first use

• 16 billion code possibility

• RFID 125 KHz

RFID Access control

Stand alone access control for jewellery, closet, office access….

Model: XR530

• RFID KEY avalaible with leather key ring

• locking system command

• Door entry control

• 2 alarm output , 1 is dedicated for vandalism

• Power Supply 12 V DC à 30 V DC

• Stand alone Access control


• Over 16 billions Codes

• RFID BADGES can be make on demand

Model: AXKEF CE10

• RFID reading to manage 8 different area or authorizations with

Self learning.

• Application in Buildings

• Can be used in offices, public space, patrol control….

• Application for industries

• Access control on machine, robots…

• Control of containing

• Automatic sorting




Safety relays / Safety modules

Model:AWAX26XXL • PL=e Acc. to EN ISO 13849-1



• Low consumption inputs

• Control of switches with acotom

Process

• Control of mechanical safety systems (

grip switch, foot switch…)

• Deep switch at the back to choose reset

m mode (Auto/manual)

• Power supply24Vac/dc • 22,5 mm Housing

• Compatible with aluminium profile

• Withdrawable terminals

• 3 Safety lines NO +1 NC 8A/250V

• Embedded Version : AWAX26XXL12V

Model:CO13XXL • PL=e Acc. to EN ISO 13849-1



• Control of emergency stop buttons

• Control of mechanical switches

• Control of interlocking systems

• Independent supply inputs to avoid

in- rush current

Control of emergency stop buttons

special for maintenance service

Model: COM3C • PL=e Acc. to EN ISO 13849-1 • Cat.4 acc.

to EN ISO 13849-1

• SIL 3 acc. to EN62061 • IIIC

selon EN 574

• 2 control button 1NO+1NC • 22,5 mm

Housing

• Allowed pushing time difference between

buttons: 400MS

• Sortie 2NO + 1NC 8A/250V

• Test input

• DLC short circuit monitoring

• Withdrawable terminals

• Power supply24Vac/dc

• Type I

Designed for bimanual buttons

Model: C4CK Safety relay.

CAPTIVE KEY MODULE : the key

position overpasses the switch status

Version A

Key locked and turned : 4NO+1NC

8A/250V

Key removed : 4NC+1NO 8A/250V

Version B

Key locked and turned : 4NC+1NO

8A/250V

Key removed : 4NO+1NC 8A/250V

Versions A and B

1 line for test loop and 2 LEDs

Detection of Null speed/zero speed for interlocking system

Model:SPEEDTRONIC N • PL = e selon EN ISO 13849-1

• Cat.4 selon EN ISO 13849-1

• SIL 3 selon EN 62061

• Compatible with frequency variator

• Selectable threshold

• Selectable response time

• Monitor the stills and of a 3 phased motor

• Output compatible with programmable module

• Output 4 lines 8A:250V (3NO+1NC)

• Up to 690V 3 phased motor.

• Adjustable persistence from 2 to 7 S

• No speed sensor

• Adjustable timing from 2 to 7 S for opening interlocking systems

• Neither mechanical accessories nor motor intervention




Safety Switches plastic housing (without locking) Safety switch 90 degree

adjustable head.

Safety Hinge :

Zinc plated steel shaft

Safety switch Fully turnable head

Safety hinge

Zinc plated steel lever

Safety Switches metal housing (without locking) Safety switch 90 degree

adjustable head

Safety Hinge Zinc plated steel shaft

Safety switch Fully turnable head

Safety hinge Zinc plated steel lever

Pull wire / Rope Pull Safety switches Metal housing Pull wire with reset

For emergency start

Pull wire without reset

For simple stop

Pull wire with reset

For emergency start

Pull wire without reset

For simple stop




Safety Hinges with NO/NC contacts Safety Hinge back axial output

Safety Hinge M12,8 pole

connector

Safety Hinge

Bottom axial output

Safety Hinge

Top axial output

Vibration Monitoring products

Vibration sensors:

Our products include general and special purpose accelerometers, velocity sensors, eddy current probes and LVDTs. They are used in a diverse

range of applications, such as; automotive, aerospace, industrial processing, power stations and wind turbines. Also, as an OEM we can design and

develop custom built sensors.

General Purpose Monitoring Sensors:

Monitoring Sensors are for use with PLC’s and other industrial controllers to provide the user with a continuous output of vibration usually as a 4-

20mA signal. Changes in the monitor signal will allow the user to spot vibration changes in the part of the machine to which the sensor is attached.

Rapid changes accompany such conditions as machinery working loose from its mountings, fan blade malfunction, bearing failure all of which

require immediate attention and machine shutdown to avoid widespread damage and loss of machine time. If the signal is logged at regular

intervals, gradually increasing vibration indicates wear in the part of the machine where the sensor is fitted calling for replacement or detailed

study with a portable vibration analyser.




Triaxial Sensors:

A lightweight, compact, side-entry triaxial sensor ideal for the test laboratory or light industrial applications.

Vibration meter:

The MTN/VM220 is a compact, rechargeable, portable handheld Vibration meter designed to conform to ISO10816-3 and operate with a constant

current accelerometer providing accurate vibration measurements. Features comprise of the ability to store up to 100 time-stamped readings,

including; RMS, peak, peak-peak, crest factor and bearing conditions all on an easy to read vibrant colour LCD display.

Submersible General Purpose Sensors:

Submersible, general purpose, top-entry, constant current accelerometer with isolated AC output for use in submersible conditions with integral

heavy duty polyurethane cable.

ATEX and IECEx Group II certified :

ATEX and IECEx Group II certified. General purpose, top-entry, velocity transducer with DC output with integral stainless overbraided cable.




Vibration Switch:

Vibration switches with internal or external vibration sensor, alarm relays and 4-20mA output. A complete condition monitoring and alarm module

operating from 110/230VAC or 24VDC.

Trip Amplifiers :

4002ALM-6 Universal Input Trip Amplifier

ma, volts, thermocouple & rtd inputs

configurable trip actions and failsafe modes

Display of input,setpoints and configuration

Features such as latching, delay on as standard

Isolated Transmitter supply and retransmitted output

The 4002ALM-6 has been designed to perform virtually any Trip Amplifier function 'out of the box’.

With input types including mA, volts, thermocouples and RTD's and others and a re-transmitted 4-20mA or voltage output as standard, the

4002ALM-6 has every feature required built-in as standard. Functions such as latching, delay on, delay off and power on delays can all be called

up from the built-in menus, no PC software or programming is required. The power supply can be anything from 16 to 30Vdc.

2002ALMHL Dual Setpoint Trip Amplifier

Wide range of mA or voltage inputs

Configurable Trip Action- failsafe modes

Isolated Input Stage

Setpoints available as 0-10V on setpoint terminals

24 Vdc or 24Vac supply as standard

The 2002ALMHL accepts a wide range of mA and voltage inputs, including 4-20mA, 0-20mA, 0-10V and 1-5V.the unit has two relay alarm outputs

which can be configured as high or low alarms and both relays have change-over contacts which are mains rated.Each relay can be configured as

fail-safe or non-fail-safe and each LED indiactor can be ON when the units is in alarm or OFF when an alarm state is reached. It is also possible to

use the device as a latching trip amplifier with a single alarm output.

The unit is powered from a range of voltages including 12Vdc 24Vdc and 24Vac.

Products Booklet (ISAC Enterprises)

Documents

Transcript of Products Booklet (ISAC Enterprises)