PRODUCTS 2011 - Canycom - en 2011 PRODUCTS 2011 Your CANYCOM-Dealer: Consultation • Sales •...
Transcript of PRODUCTS 2011 - Canycom - en 2011 PRODUCTS 2011 Your CANYCOM-Dealer: Consultation • Sales •...
2
CanyComA company name that states the founders goals
The combination of the 7 characters of the alphabet of CANYCOM can be interpreted as, “a company that cultivates happiness and car-ries satisfaction to customers.”
A company name that expresses our goals
The meaning of CANYCOM’s seven character name is derived from the expression CAN CARRY ANY COMMUNICATION. It is charged with the intent of our company goals
CHIKUSUI CANYCOM, INC.90-1 Fukumasu, Yoshii-machi
Fukuoka 839-1396Japan
Phone: +81 943 75 21 95Fax: +81 943 75 43 96
E-Mail: [email protected]
Canycom Office EuropeA- 1040 Vienna, Schwindgasse 11/10
Mobile: +43 699 16 300 [email protected]
E-Mail: [email protected]
Hitoshi Kaneyuki
PRESIDENT
3
BLACK BASIC BLADE
Reinforced high frequency quenchedblade.
For cutting soft grass.
The free swingback blade can be used ina fixed position using fixing bolts.
RED ITTOUSAI
High frequency quenched and tempe-red blade.
Durable blade with hardened tip.
Designed for rough yards.
SILVER HIROSAKI
Sharper and more durable than the RedIttousai because of its trapezoid shape.
Blades can be used in a fixed position forcutting brush.
This blade is suitable for cutting highgrass.
HEARTFULL HIROSAKI
Features 2 blades thus leaving less uncutgrass behind!
Trapezoid shaped blade is sharp anddurable.
Able to cut a wide range of brush fromtough to softer grass. Can be used in freeswinging or fixed mode.
BLADES
4
2 WD | KEY FEATURES
toolless bladeexchangestep 1
Shaft drivenblade drive
On demandpermanent Diff.-Lock system
Simple hand lever systemwith cruisecontrol
step 2
Deck washing system“easy clean“
5
Shaft Driven Deck
Shaft Driven 4WD
Front Brake System
Deck washing system“easy clean“
On demandpermanent Diff.-Lock system
Oil cooler
Safety lighting system
Toolbox
Simple hand lever systemwith cruisecontrol
KEY FEATURES | 4WD
additional foot pedal
L x W x H in mmWheel distance
Tread in mm:Ground distance
EngineMax. OutputStart system
FuelFuel capacity
WeightRated cutting summary
Steering4 WD
HSTHST-Oil
Diff.-LockOil cooling system
Speed
Turning radiusGradeabilityFront WheelRear Wheel
Cutting widthCutting height
Sliding deck featureBlade Type
Cutting Deck AdjustmentCutting Deckt
1796 x 985 x 8501230 mmF: 820, R: 735105 mmSubaru Robin EX4010,3 kW/14,0 HPElectro startPetrol7 Liter240 kg7.000 m2/hAdjustable, 2-Wheel-„Hydro-Gear“ BDR 31920W 50-/Yes-F: 0-10 km/h,R: 0-7 km/h950 mm15˚ / 33% all axlesAGR 3.50-7", 2PR16 x 7.00-8", 4PR915 mm0 - 65 mm (5 steps)-Swinging BlademanualShaft driven
SPECIAL FEATURES
Spacious sitting area 1261 mm
Easy to open engine cover
6
L x W x H in mmWheel distance
Tread in mm:Ground distance
EngineMax. OutputStart system
FuelFuel capacity
WeightRated cutting summery
Steering4 WD
HSTHST-Oil
Diff.-LockOil cooling system
Speed
Turning radiusGradeabilityFront WheelRear Wheel
Cutting widthCutting height
Sliding deck featureBlade Type
Cutting Deck AdjustmentCutting Deck
1947 x 1020 x 8601300 mmF: 860, R: 800130 mmSubaru Robin EH 65 Auto-Choke16.4 kW/ 22.0 PSElectro start Auto-ChokePetrol20 Liter325 kg8.000 m²/hAdjustable, 2-Wheel- „Hydro-Gear“ BDR-31920W 50Yes (powershifting)5 LiterF: 1. 0-8 km/h, 2. 0-14 km/hR: 0-6.0 km/h420 mm15° / 33% all axlesAGR 4.00-7“, 4PR17x8.00-8“, 4PR975 mm0 - 150 mm (21-steps)-Swinging BladeManual (Gas cylinder)Shaft driven
8
SPECIAL FEATURES
Shaft driven blade drive
Accelerator can be operated by left hand lever or foot pedal and features cruise control.
front wheel brake
Oil cooler
9
CM 226/ CM 225 | PROFI 2WD
NEW!Mower deck opens outward to the side for easy blade exchange
not CM 225
powered by
previous model
10
Big 20 liter tank- work a whole day
fully adjustable suspension seat
blade clutch leversliding cutting height lever
Adjustable steering height Telescoping steering wheel
Cutting height from 0 to 150 mm(21 Steps)
Shaft Driven Deck
Shaft Driven 4WD
11
F1 SPECIAL FEATURES
LESS TURNING RADIUS
75°CIRCUMFERENCE DIAMETER 35CM
Front wheels turn up to a 75° angle &inside rear wheel brakes
*CMX227 only in 2WD-Mode
MORE SPACE FOR GRASS
NEW BUILDING METHOD
The brush cutter front is positioned high off the ground to keep from bending back grass up to 236 mm high. This leaves a cleaner cut finish and less uncut grass.
236 MM
740 MM
toolless bladeexchangestep one
L x W x H in mmWheel distance
Tread in mm:Ground distance
Engine
Max. OutputStart system
FuelFuel capacity
WeightRated cutting summery
Steering4 WD
HSTHST-Oil
Diff.-LockOil cooling system
Speed
Turning radiusGradeabilityFront WheelRear Wheel
Cutting widthCutting height
Sliding deck featureBlade Type
Cutting Deck AdjustmentCutting Deck
1947 x 1020 x 8601300 mmF: 860, R: 800130 mmSubaru Robin EH 65 Auto-Choke16.4 kW/ 22.0 PSElectro start Auto-ChokePetrol20 Liter345kg8.000 m²/hAdjustable, 2-Wheelyes on demand „Hydro-Gear“ BDR-31920W 50Yes (powershifting)5 LiterF: 1. 0-8 km/h, 2. 0-14 km/hR: 0-6.0 km/h900 mm in25° / 55% all axlesAGR 4.00-7“, 4PR17x8.00-8“, 4PR975 mm0 - 150 mm (21-steps)-Swinging BladeManual (gas cylinder)Shaft driven
12
SPECIAL FEATURES
Shaft driven cutting deck and AWD
Accelerator can be operated by left hand lever or foot pedal and features cruise control.
front wheel brake
Oil cooler
13
CMX 227/ CMX 224| PROFI 4WD
NEW!Mower deck opens outward to the side for easy blade exchange
not CMX 224
powered by
previous model
14
L x W x H in mm
Wheel distanceTread in mm:
Ground distanceEngine
Max. OutputStart system
FuelFuel capacity
WeightRated cutting summary
Steering4 WD
HSTHST-Oil
Diff.-LockOil cooling system
Speed
Turning radiusGradeability
Front Wheel
Rear Wheel
Cutting widthCutting height
Sliding deck featureBlade Type
Cutting Deck AdjustmentCutting Deckt
1980 x 1040 x 940 /1970 x 1040 x 9201365 mm /1370 mmF: 810, R: 780 / F:830, R:870145 mm / 125 mmSubaru Robin EH65 Auto-Choke16.4 kW (22.0 HP)Electro start Auto-ChokePetrol14,5 Liter355 kg / 330 kg10.000 m²/hAdjustable, 2-WheelYes (on demand system CMX 222)„Kanzaki“ 168H37-2900120W 50Yes (powershifting)8 LiterF: 1. 0-7.5 km/h, 2. 0-12.1 km/hR: 0-6 km/h990 mm / 950 mm25° / 55% all axles /15° / 33% all axlesAGR 4.00-8“, 2PR /AGS 4.00-7“, 2PR19x8.00-10“, 4PR /17x8.00-8“, 4PR975 mm0 - 180 mm (stepless) / 0 - 160 mm (stepless)-Swinging BladeManual (Gas cylinder)Shaft driven
Blade deck lifts up to 200 mm for easier movement over hurdles
Heartfull Hirosaki - mulching blade for much more efficient cutting see page 3
all wires, bearings, etc. covered by seal-system
SPECIAL FEATURES
180 mm Cutting height
Safety lighting system
Toolbox
CM 223 | PROFI 2WD
15
Adjustable steering heightTelescoping steering wheel
CMX 222 | PROFI 4WD
Height and length adjustable on seat
ROPS Systemavailable
powered by
L x W x H in mmWheel distance
Tread in mm:Ground distance
EngineMax. OutputStart system
FuelFuel capacity
WeightRated cutting summary
Steering4 WD
HSTHST-Oil
Diff.-LockOil cooling system
Speed
Turning radiusGradeabilityFront WheelRear Wheel
Cutting widthCutting height
Sliding deck featureBlade Type
Cutting Deck AdjustmentCutting Deckt
2065 x 1110 x 10101460 mmF: 810, R: 900115 mmKawasaki FH 641 V15.7 kW/ 21.0 HPElectro startPetrol15 Liter415 kg9.000 m²/hAdjustable, 4-WheelYes (permanent)„Hydro-Gear“ BDR-32120W 50Yes (powershifting)8 LiterF: 1. 0-6.7 km/h, 2. 0-10 km/hR: 0-6 km/h950 mm25° / 55% all axlesAGR 4.00-7“, 2PR17x8.00-8“, 4PR900 mm20 - 100 mm (electric)Yes 150 mm right sideSwinging BladeelectricShaft driven
16
Durable mulching blade
All Wheel Drive
sliding deck
17
Adjustablesteering wheel
Adjustable electric blade deck
Side handles on both sides
CM 2103 | PROFI 4WD
Canopy available
powered by
18
OPTIMAL BRAKE POWER
SYSTEM A
Hydrostatic brake system by radial piston pump
all models
SYSTEM B
mechanical brake system at the rear transmission. Controlled by separate brake pedal.
all models
SYSTEM Cinternal brake system on front wheel shaft transmission. Controlled by separate brake pedal.
4WD modelsCMX222, CMX227 (similar CMX224)
SYSTEM D
Two internal brake systems directly as-sembled at the front wheels. Controlled by separate brake pedal.
model CM 226 (similar CM 225)
System A System B System C System D
CM 141 • •CM 223 • •CM226 • • •CMX 222 • • •CMX 227 • • •CM2103 • •
A
BC
D
D
19
The rear transmission offers little traction on an incline of more than 30% (66,7%) as all weight shifts to the front of the wheels.
To avoid braking trouble on such slopes CANYCOM has developed front broke systems (System C and D).
System A System B System C System D
CM 141 • •CM 223 • •CM226 • • •CMX 222 • • •CMX 227 • • •CM2103 • •
full traction on front axle = optimal brake power
30°
low traction on rear axle
20
PERFECT PROFI POWER
ROBIN EX 40 OHC
low noiselow vibrationsmore power less emissionsSplash lubrication (for extreme incline)
ROBIN EH 65low noiselow vibrationsless gas consumption electronical ignition autochoke Pressure lubrication (for extreme incline)
KAWASAKI FH 641low noiselow vibrationsless gas consumption electronical ignition Pressure lubrication (for extreme incline)
HPkW18
16
14
12
10
8
OUTPUT
24
22
20
18
16
14
12
102000 3000 3600
REVOLUTION rpm
TORQUE50
40
30
20ft. lbs
N.m
60
50
40
30
MAXIMUM OUTPUT
RECOMMENDED
MAXIMUM OUTPUT
35
OUTPUT
kWHP
6,7
13,4
20,1
26,8
5
10
15
20
TORQUE
N.m
55
45
2000 2400 2500 3200 3600 4000
REVOLUTION rpm
MAXIMUM OUTPUT
RECOMMENDED
OUTPUT RANGE
MAXIMUM TORQUE (NET)
TORQUE
N.m
28
26
24
22
2
3
4
5
6
7
8
9
10
2,68
4,02
5,36
6,71
8,05
9,39
10,73
12,07
13,41
OUTPUT
2000 2400 2800 3200 3600
REVOLUTION rpm
MAXIMUM TORQUE (GROSS)
MAXIMUM OUTPUT (GROSS)
MAXIMUM OUTPUT (NET)
RECOMMENDEDOUTPUT RANGE
kW HP
powered by
powered by
22
Overall L x W x H in mmMachine Weight
EngineEngine TypeMax. OutputTransmission
Number of Gears /Forward Number of Gears /Reverse
Max. SpeedMin. Speed
Min Ground ClearanceRubber Track width
TreadTrack Ground Contact
GradeabilityGround Pressure
Cutting WidthCutting Height
Drum revolution adjustableAmount of SlideAdjusting Height
Blade TypeFuel
Fuel capacityOil capacityPTO Oilflow
PTo Pressure
3465 x 1700 x 14052000 kgKubotaV220332.9 kW (44.8 PS)/2600 rpmHydraulicHST (Variable Speed)HST (Variable Speed)0~9 km/h0~6 km/h280 mm320 mm1170 mm1345 mm35˚0.24 kgf/cm2
1545 mm-20~320 mmyes (0-2100 RPM)500 mmHydraulic80 (pairs) Y-bladesGasoil52 liter42 liter92 liter/min210 bar
20
24
28
32
36
OU
TPU
T [k
W]
1400 1600 1800 2000 2200 2400 2600 2800
REVOLUTION RPM
270250230
FUEL
CON
SUM
PTIO
N b
e [g
/kW
.H]
SAE J1995 GROSS POWER
TORQ
UE
[N.m
]150140130120
KUBOTA V2203
Pressure lubrication (for extreme incline)
Emission: EPA intermim Tier 4/3A
Durability maximized by water channel between the cylinders
Kubota E-TVCS (Ecology - Three Vortex Combustion System)
MoS2 coated pistons
23
Reversing FanSelf-cleans and preventsover heating
Rotor Head Slides50 cm to the right for workingnext to dangerous areas or next to fences
Heavy-Duty Undercarriage
Hydraulically-driven Flail Knife Drum
Self-leveling system
PTO Linkage
Only drum transmission by belt 3 belts = 1 transmission
80 pairs of Y-blades deflect obstacles from all directions = less damage to blades
Mower drum revolution adjustable
0 to 2100 RPM
Sliding Rotor Head
CG 431 | Bush Cut ter George
FIND
THE R
IGH
T MA
CH
INECG
43
1P
RO
FI
HP
45
Cutting w
idth: 1545 m
mC
utting height: -20~320 m
m
35
no
Is your job site on a slope ? YES
Is your work site rough and uneven?
Do you cut bush m
ore than 5 tim
es a year?D
o you need to cut bush over 1 m
eter tall?
Can you take advantage of a 1545 m
m w
ide machine?
Is having a tight turning radius im
portant to you?
Cutting w
idth: 975 m
mC
utting height: 0~
160 mm
CM
22
3P
RO
FI
HP
22
HS
TO
ILCOOLING 15
Cutting w
idth: 915 m
mC
utting height: 0~
65 mm
CM
14
1P
RIV
AT
E15
14HP
Cutting w
idth: 975 m
mC
utting height: 0~
150 mm
CM
22
6P
RO
FI
HP
22
HS
TO
ILCOOLING 15
CM
X 2
22
PR
OF
IH
P22Cutting w
idth: 975 m
mC
utting height: 0~
180 mm
HS
TO
ILCOOLING
25
CM
21
03
PR
OF
IH
P21
Cutting w
idth: 900 m
mC
utting height: 20~
100 mm
4WS
HS
TO
ILCOOLING
25C
utting width:
975 mm
Cutting height:
0~150 m
m
CM
X 2
27
PR
OF
IH
P22
HS
TO
ILCOOLING 25