Productos k tek 1
-
Upload
antonio-contreras -
Category
Documents
-
view
58 -
download
7
Transcript of Productos k tek 1
T H E G L O B A L L E A D E R I N L E V E L D E T E C T I O N
K-TEK Corp. K-TEK Instruments (Pty) Ltd.
K-TEK Level Eng. Pvt. Ltd.
K-TEK (Tianjin) Level Co., Ltd.
K-TEK BV K-TEK Solids Level
Liquid and Bulk Solids Level
MAGNETIC LEVEL GAUGES & ACCESSORIES
AccuTrak AT200 Compact
Magnetostrictive Level Transmitter
Magnetic Liquid Level GaugeBenefits:n Low cost of ownershipn Safe and simple installationn 5 year warrantyn High visibilityConfigurations:n High pressure (4500 psi)n High temperature (1000˚F) n Extruded outletsn Engineered floats
(>0.25 SG)
AT200 Magnetostrictive Level Transmitter
shown with KM26S
MW05 Dual Chamber Level System n Redundant level measurement
- Guided Wave Radar (GWR) - Magnetostrictive n Low cost of ownershipn 5 year warranty n Highly visible indication
Electric Switch n Hazardous area rating: FM approved
and CSA Certifiedn Enclosure: stainless steel/explosion
proof, NEMA 4x/Ip56, ¾” FNPTn Switching mechanism: cam driven,
snap-action; AC:10 amp DC: ½ amp; min process temp -60°F (-51°C) and max process temp 300°F (149°C), 600°F (316°C) with IP option; 13/16” deadband, DPDT
n For high-temperature, vibration and high-corrosive applications
Electric Switch n Hazardous area rating: FM approved and CSA
Certifiedn Enclosure: hermetically sealed/explosion proof,
NEMA 4x/IP56, ½” FNPTn Switching mechanism: reed, AC/DC 1 amp, max
process temp 600°F (316°C) with IP option, 1/8” deadband, SPDT
Electric Switch(Dual Compartment Housing) n Hazardous area rating: FM approved; CSA and ATEX Certifiedn Enclosure: stainless steel, dual compartment, hermetically sealed,
explosion proof; NEMA 4x/IP56; ½” FNPTn Switching mechanism: cam driven, snap-action; AC: 10 amp DC:
2.6 amp; min process temp -320°F (-195°C) with option and max process temp 300°F (149°C), 1000°F (538°C) with IP option; 15/16”, DPDT
n For high-temperature, vibration and high-corrosive applications
*SIL2 certification valid only at Prairieville manufacturing facility.
World’s FIRST *SIL2 CertifiedMagnetostrictive Level Transmitter
Magnetostrictive Level Transmitter n Designed to mount externally
to K-TEK’s KM26 or other magnetic level gauges
n High accuracy: .01% of full scalen Superior piezo ceramic sensor
(patent #5,473,245)n Never requires recalibration:
set it and forget it
MAGNETOSTRICTIVE LEVEL TRANSMITTERS
Compact Magnetostrictive Liquid Level Transmitter for Non-Contact n Designed to mount externally to K-TEK
KM26 or other magnetic level gaugesn High resolution 4-20 mA outputn Suitable for high temperature
applications n Calibrates without opening enclosure
AccuTrak AT600 Compact Magnetostrictive Level
Transmitter
AT200 Magnetostrictive Level Transmitter
shown with KM26S
Compact Magnetostrictive Liquid Level Transmitter for Direct Insertionn High accuracy - .02%n Loop powered to 16ft (5m)
probe lengthn High resolution 4-20 mA outputn High accuracy - .02%
Magnetic Level Gauge
Magnetostrictive Liquid Level Transmitter n Dual compartment housing with separate field terminal
compartmentn Pressure to 3000 psi (207 bar), Std. 1800 psi (124.1 bar)n Temperature range: -320˚F to 800˚F (-196˚C to 427˚C) with optionsn HART protocol or Honeywell DE communications available
World’s FIRST *SIL2 CertifiedMagnetostrictive Level Transmitter
*SIL2 certification valid only at Prairieville manufacturing facility.
External chamber used for side
tank mounting
Centering disc
Dual compartment
Modular electronics
Glass window cover
State-of-the-Art Loop Powered, 4-20mA Output GWR Level Transmitter for Level and Interface Applications n SIL2 Suitablen The MT5100 provides both lower and upper
level fluid indicationsn Flooded or non-flooded chambersn Transmission of interface and upper fluid
Signals with the use of the optional RI100 repeat indicator transmitter
n Detection of the presence of a rag layer (patent pending)
State-of-the-Art Loop Powered, 4-20mA Output GWR Transmitter for Liquid Level Applications n SIL2 Suitablen Reliable level measurement over
varied process conditionsn Distance 2 to 100 ft. (30 m)n Temperatures to 800˚F (427˚C)n Pressures to 5000 psi (344 bar)
GUIDED WAVE RADAR TRANSMITTERS
WaveForm display allows engineer/technician to view measurements in real-time
Coaxial probe with slotted groove design provides
maximum signal strength without the use of an
external chamber
High temperature extension
Explosion Proof, Smart Laser Level Transmitter n Long range - 240 ft (75 m)n Measure any surface at any angle with narrow beamn Explosion-proof dual compartment enclosuren HART protocoln Built-in aiming laser
The SureShot™ 140XP comes with an on-board graphic display
High Performance, Long Ranges Laser Level and Position Transmittern Long range up to 200 ft / 60 m (level applications) and
up to 1312 ft / 400 m (positioning applications)n Measures any surface at any angle with narrow beamn Rugged and robust enclosuren Accepts 110/220 VAC and +24VDC input voltagesn Built-in aiming laser
Versatile, Intermediate Range Laser Level and Positioning Transmitter n Long range to 500 ft. / 150 m (positioning applications)
and up to 100 ft. / 30 m (level applications)n Measures any surface at any angle with narrow beamn Easy installation and intuitive setupn Aiming laser optional
Two Dimensional Laser Scanner for Non-Contact Volumetric Measurement of Belt Conveyed Materials n Non-contact belt scalen Simple installation during conveyor operationn Non-contact conveyor volume and
speed measurementn No routine maintenance
or calibration
Three Dimensional Laser Scanner for Non-Contact Volumetric Measurement of Bulk Materials in Silos and Stock Piles n 3D Laser surface profilingn Integral laser pointer for alignmentn 100ft X 100ft (30m X 30m) scanning arean Volume & level measurement of any complex
shapen Inventory measured in less than 5 min
LASER TRANSMITTERS
LM80 with 4” Tri-Clover Quick disconnect –
food processing and beverage industry
LM80 with 4” Tri-Clover and Heated Optic – food processing/beverage and
pharmaceutical industryLM80 with Heated Optic
– water treatment and chemical industry
Hand-held programmer plugs into LM™80 and LM™200
laser transmitters
Dust tubes are available in stainless steel or aluminum for dust protection and long-term reliability
KSONIK™ I Short Range Ultrasonic Level Transmittern Range to 50 ft. / 15 mn Graphic LCD displayn Integrated KSCOPE softwaren Automatic variable GAP for difficult applicationsn Open channel flown Trend recorder
KSONIK™ III Long Range Ultrasonic Level Transmittern Long range up to 195 ft. / 60 m n Graphic LCD displayn Single or dual channel configuration n Integrated KSCOPE softwaren Automatic variable GAP for difficult applicationsn Trend recorder
Model | K10T3
Model | K20H
Model | K60
Model | K20Model | K10
Model | K10F
Ultrasonic Transducer Series
ULTRASONIC TRANSMITTERS & SWITCHES
KSONIK™ MICRO Loop Powered Ultrasonic Level Transmitter n Up to 16 ft. / 5 m measuring rangen Low cost, compact level transmitter
with integral transducern Four digit alpha-numeric displayn Auto variable power control for
difficult applicationsn PVDF wetted parts for corrosive applications
KSONIK™ MICRO COMPACT Ultrasonic Level Transmittern Up to 13 ft. / 4 m measuring rangen Low cost, compact level transmitter
with integral transducern Temperature compensationn PVDF wetted parts for corrosive applications
KSONIK™ MICRO Ultrasonic Level Transmitter and Switchn Up to 32 ft. / 10 m measuring rangen Low cost, compact level transmitter
with integral transducern 128 x 64 dot matrix displayn Open channel flow measurementn Auto variable power control for difficult applicationsn PVDF wetted parts for corrosive applicationsn Continuous level transmitter and level switchn Trend recorder