Production Logging Tools (PLT)Production Logging Tools (PLT) Production logging tools provide high...
Transcript of Production Logging Tools (PLT)Production Logging Tools (PLT) Production logging tools provide high...
Production Logging Tools (PLT)
http://www.well-sun.com.cnXI’AN WELL-SUN ELECTRONIC TECHNOLOGY PLC
i Development
i Innovation
i Cooperation
i Responsibility
http://www.well-sun.com.cnXI’AN WELL-SUN ELECTRONIC TECHNOLOGY PLC
Production Logging Tools (PLT)
Production logging tools provide high resolution measurements of the fluid identifications and flow rates
in the downhole well environment that are used to evaluate well performance. A typical production
logging toolstring consists of multiple sensors covering a range of physical measurements in order to
identify fluid types, volumes and rates of their production or injection profile.
The combination of sensors and their configuration may be tailored to suit producing or injecting wells
and to resolve single-phase, two-phase or three-phase flow regimes. Tools come in a range of sizes to
provide optimal coverage and resolution across a range of tubular diameters.
h General production diagnostics
h Analyze production/injection profile by zone
h Monitor well efficiency
h Stimulation performance evaluation
Overview
Application
Features & Benefits
h Super compact design
h High resolution measurements
h Combination with any WSTBus tool
h Memory/SRO configurations
h Corrosion resistant
h Combined with Array Tools for Horizontal Well
Technical Specification
h Max. Working Temperature: 175℃ ( 347℉)
h Max. Working Pressure: 100MPa(14500Psi)
h OD: 43mm (1 11/16")/35mm (1 3/8")
http://www.well-sun.com.cnXI’AN WELL-SUN ELECTRONIC TECHNOLOGY PLC
Memory
or
SRO?
Panel from
Warrior
TDR02MCM02
Warrior
Warrior 8.0
Memory
SRO
Unavailable
Cable
With *GDT Protocol
CHT*
PSC21
HWT32
WTC38
SHT01
DBC14
DMC10
QPC08
GRT26
DRC*/RCT*
FDR18 FDA16
DCT13
DRC*/RCT*
HTF10
CSFM CRFM IFJM IFBM
CFB11
NST23* NST16*
AIP17
Panel from
Well-sunDAS23
Production Logging Tools (PLT)
Standard PLT Schematic
AIP 1U Acquisition Interface Panel
CHT Cable Head
CFB In-line Flow meter
CSFM Caged Fullbore Spinner Flow meter
CRFM Caged Fullbore Roller Flow meter
DRC Dual Roller Centralizer
DAS Data Acquisition System
DMC Dow nhole Memory Cartridge
DBC Dow nhole Battery Cartridge
DCT Dual-caliper Tool
FDA Tuning Fork Density Tool
FDR Radioactive Fluid Density Tool
GDT Global Dow nhole Tool Protocol Special for Warrior 8.0
GRT Gamma Ray Tool
HWT Heavy Weight Tool
HTF Water Holdup/Temperature/Flow meter Electroncis
IFJM Jew eled Bearing Continuous Flow meter Body
IFBM Ball Bearing Continuous Flow meter Body
MCM Memory Control Module
NST Noise Spectrum Tool
PSC Sw ivel Sub
QPC Quartz Pressure/Casing Collar Locator
RCT Single Roller Centralizer
SRO Surface Readout
SHT Slickline Head
TDR Time-depth Recorder
WTC Wireline Telemetry Cartridge* The noise tool is only operated with SRO currently.
* NST16 has the func tion of playing the audi o of down hole noise in real-time, while the NST23 doesn't have this function.
* Cable Head for 5.6mm or 8.2mm Cable Optional.
* Dual Roller Centralizer for Horizontal & Vertical Well Optional.
* Single Roller Centralizer for Vertical Well.
http://www.well-sun.com.cnXI’AN WELL-SUN ELECTRONIC TECHNOLOGY PLC
Specifications
Production Logging Tools (PLT)
482.6mm (19") × 413.0mm (16") × 44.45mm (1.75“)
Mounted in Standard 19” Frame
Weight 8Kg (18lb)
Operating Temperature (-10oC)- (+60oC)
AC100-240V(47-63Hz) or DC 140-343V
Applicable to international power supply
Max. Power 240 watt
Voltage DC25-240V, Adjustable
Adjustable Current 50-500mA, Power Less Than 100W
Continuous Working Time 48hrs
Transmission Mono-conductor, Encode/Pulse Mode
Applicable Wireline Mono-/Multi-conductor
Depth Input Orthogonal Increment Signal, Output +5V power
Tension Input Analog with range 0.25V-5V, Output ±15V power
Port to PC USB
Depth Display Display(-9999.99)-(99999.99), Optional Metric/Imperial Unit.
Depth Sampling Interval 0-320m, Optional.
Drawing Scale 1:20 (50, 100, 200, 500, 1000) Optional
Max. Curves for Display 400
Max. Logging Speed 3200m/hr
Display Curve and Depth Synchronous Rolling
Record Hard Disk, Thermal Drawing
Dimensions
Operating Voltage
Power Supply
AIP17
http://www.well-sun.com.cnXI’AN WELL-SUN ELECTRONIC TECHNOLOGY PLC
Specifications
Production Logging Tools (PLT)
· DSP chip allowing adaptive processing of signal interface
· USB port for communication between the system and computer
· Chinese / English interface in software
· Outputs in multiple data formats
· Combinable with DDL Ⅲ (i.e. 5.8KBPS Manchester) Protocol tools
· Combinable with WSCbus protocol tools like MCT, EMT, CBL
· Combinable with WSCbus PLT tools
· Combinable with vertical focused magnetic thickness tool
· Combinable with gyro tool
· Combinable with Segmented Bonding Tool (SBT) in 3505 standard
· Combinable with neutron and C/O measuring tools
· Perforating operations conveyed in cable or tubing etc.
Specifications
AC Power Supply Voltage 110V/220V±11%
DC Power Supply Voltage 0-301V (continuous adjustable)
Power Rating 500W
Max Logging Depth 9000m
Max Logging Speed 3200m/h
Depth Sample Interval 0.00625/0.0125/0.025/0.05/0.2
Depth Display Range 0 ~ 9999.10m
Both curves and depth lines are
synchronously scrolled on screen
Plotting Medium Film and thermal paper
Max Numbers of Curves
Displayed100
Display Mode
Benefits
DAS23
http://www.well-sun.com.cnXI’AN WELL-SUN ELECTRONIC TECHNOLOGY PLC
Specifications
Max Working temperature -10 - 50ºC
LCD 122mm×92mm view area, 320×240 pixel, monochrome LCD.
Parameters input and functions selection
LCD backlight on/off
Power on/off
Green LED indicates logging and collecting status.
Red LED indicates alarm or erasure operation.
Clock Display the real-time clock
Memory
A 16MB nonvolatile memory is provided,
enabling to purely record depth data for 920 hours,
or record depth and all 8 analog channel data for 352 hours.
RS232 serial port
Options of 9.6kbps, 19.2kbps or 38.4kbps baud rates
4 D-type cells
External 12-24V DC
External 100-250VAC
Depth interfaceProviding +5V and +12V power supply,
and receiving orthogonal depth signal
Power source
Control
Status LED
Communication interface
TDR02
Production Logging Tools (PLT)
http://www.well-sun.com.cnXI’AN WELL-SUN ELECTRONIC TECHNOLOGY PLC
Specifications
Working Temperature 0 - 50ºC
Operating Voltage 14-18VDC (recommended)/ 20VDC (max.)
Operating Current 50 mA
Weight 1.8 kg(3.97lb)
Switch on: battery voltage < 14.5VDC
Switch off: auto, battery voltage> 16VDC
Manually, battery voltage> 1VDC
Green (normal, voltage > 14 ± 0.5VDC)
Red (low, voltage< 13 ± 0.5VDC)
Power Indicating Light Green (power on)
Voltage (V)
Current (mA)
Connection to PC USB
Connection to Battery 2.5mm DC mono-pin socket
Tool Connection 9 pin D-type Socket
Battery Depassivation
Battery Indicating Light
LCD Display
MCM02
Production Logging Tools (PLT)
http://www.well-sun.com.cnXI’AN WELL-SUN ELECTRONIC TECHNOLOGY PLC
Specifications
OD 1 11/16"
Start torque 0.14 N.m
Transmission Mono-conductor
PSC21
Production Logging Tools (PLT)
OD 1 11/16"
Weight 20kg
Transmission Mono-conductor
HWT32
OD 1 11/16''
Cable Diameter 5.6mm and 8.2mm cable
Applicable Cable Size
CHT56 5.6mm cable
CHT58 8.2 mm cable
CHT
Cable Mono-conductor
OD 1 11/16"
Operating Voltage
WTC38 180-200VDC
WTC45 200VDC
Operating Current
WTC38 24mA±10% (Zero-load)
WTC45 20mA±10% (Zero-load)
Max. Load Current
WTC38 1000mA
WTC45 2200mA
WSCBus Code AMI
WSCBus Uplink Rates 50, 71, 100, 143, 200Kbits
WSCBus Downlink Rate 300Kbits
WSCBus Uplink Amplitude ±14V
WSCBus Downlink Amplitude ±8V
WSTBus Code AMI
WSTBus Data Rate 500Kbits/sec
WSTBus Amplitude ±1V
WTC
http://www.well-sun.com.cnXI’AN WELL-SUN ELECTRONIC TECHNOLOGY PLC
Specifications
OD 1 11/16"
Working Voltage 13.5-20VDC
Standby Current 2mA
Working Current 15-30mA
Data Download Rate 4MB/min (with computer)
Sampling Rate 20ms~24hr, 20ms increment, programmable for each tool /job
Channel Quantity up to 62
Tool Bus WSTbus
Memory Capacity 512MB /1GB
Communication Rate 500Kbps
DMC10
Production Logging Tools (PLT)
OD 1 11/16"
Weight 2.4Kg(5.29lb)
Battery Model 3B3700/ PMX150C
Performance Rating High
Cell Size C type
Number of Cell 5
Cell Composition Lithium Sulforyl Chloride
Voltage Rating 3.9 VDC cell / 19.5 VDC pack
Battery Capacity 6.2AH
Continuous Discharge Current Max 500mA
DBC14
http://www.well-sun.com.cnXI’AN WELL-SUN ELECTRONIC TECHNOLOGY PLC
Specifications
OD 1 11/16“
Press. Resolution 0.008psi
Press. Accuracy 0.0002
Press. Response Time 1s (99.5% of actual value)
Temp. Accuracy 0.15oC
Temp. Resolution 0.005oC
CCL SNR >5
Logging Speed >400 m/h
QPC08
Production Logging Tools (PLT)
OD 1 11/16"
Applicable Casing Size 5.5'' - 7'' casing
Centralizing Force
DRC55For Horizontal Well
5.5'':34kg / 7'':20kg
DRC71For Vertical Well
10kg
DRC
OD 1-11/16"
Applicable Casing Size Vertical well 7'' - 9 5/8'' casing
Centralizing Force 8kg
RCT11
OD 1 11/16"
Measuring Range 0-10000 CPS
Sensor NaI
GRT26
http://www.well-sun.com.cnXI’AN WELL-SUN ELECTRONIC TECHNOLOGY PLC
Specifications
OD 43mm (1 11/16")
Resolution 0.381mm (0.015")
Accuracy
2.54mm (0.1") up to 150oC
5.08mm (0.2") up to 165oC
7.62mm(0.3") up to 175oC
Measuring Range 50.8mm (2")- 228.6mm (9")
DCT13
Production Logging Tools (PLT)
OD 1 11/16" × 2 1/8'' Shroud
Flow Output 10 pulses/rev. with direction indication
Threshold 1.53-2.44m/min (5.0-8.0ft/min)
CFB04
OD 43mm (1 11/16")
Resolution 0.381mm (0.015")
Accuracy5mm (0.2") up to 165
oC
10mm(0.4") up to 175oC
Measuring Range 2'' - 13 7/8''
Signal Amplitude ±1V
DCT08
http://www.well-sun.com.cnXI’AN WELL-SUN ELECTRONIC TECHNOLOGY PLC
Specifications
OD 1-11/16"
Water Holdup Range 0-45%
Water Holdup Accuracy 0.01
Temperature Range 0 - 175oC
Temperature Resolution 0.01oC
Temperature Accuracy ± 2oC
Response Time < 0.5S
Flowrate Output 10 Pulses/Resolution
Logging Speed > 400 m /h
HTF10
OD 1-11/16"
Measuring Mode Continuous /Stationary
Transducer Piezoelectric ceramic
Frequency Range 100Hz-12.8KHz
Frequency Resolution 100Hz
Output Curves 128 logs
NST23
Production Logging Tools (PLT)
OD 1-11/16"
Measuring Mode Continuous /Stationary
Transducer Piezoelectric ceramic
Frequency Range 100Hz-12.8KHz
Frequency Resolution 100Hz
Output Curves 128 logs
Audio Playing Available in MP3 format
NST16
http://www.well-sun.com.cnXI’AN WELL-SUN ELECTRONIC TECHNOLOGY PLC
Specifications
Flow Output 10 pulses/rev. with direction indication
Threshold
0.76m/min (2.5ft/min) in water
0.91m/min (3.0ft/min) in light oil
2.13m/min (7.0ft/min) in heavy oil
3.81m/min (12.5ft/min) in air
Max. Velocity 487.68m/min (1600 ft/min)
CRFM17HTF Type 3-arm Roller Spinner Flowmeter Mechanical
Section 1 11/16"body×4 1/2"casing
CRFM18HTF Type 3-arm Roller Spinner Flowmeter Mechanical
Section 1 11/16"body×5 1/2"casing
CRFM19HTF Type 3-arm Roller Spinner Flowmeter Mechanical
Section 1 11/16"body×7"casing
CRFM20HTF Type 3-arm Roller Spinner Flowmeter Mechanical
Section 1 11/16"body×9 5/8"casing
CRFM
Flow Output 10 pulses/rev. with direction indication
Threshold
1.67m/min (5.5ft/min) in pure water
1.82m/min (6.0ft/min) in light oil
3.04m/min (10ft/min) in heavy oil
4.72m/min (15.5ft/min) in air
Max Fluid Velocity 609.6m/min (2000 ft/min)
IFJM01HTF Type Jeweled Bearing Flowmeter Mechanical
Section 1 11/16"body×1 11/16"shroud
IFJM09
HTF Type Jeweled Bearing Flowmeter Mechanical
Section 1 11/16"body×1 11/16"shroud
with big flow guidance window
IFJM11HTF Type Jeweled Bearing Flowmeter Mechanical
Section 1 11/16"body×2 1/8"shroud
IFJM13HTF Type Jeweled Bearing Flowmeter Mechanical
Section 1 11/16"body
IFJM19HTF Type Jeweled Bearing Flowmeter Mechanical
Section 1 11/16"body
IFJM
Production Logging Tools (PLT)
http://www.well-sun.com.cnXI’AN WELL-SUN ELECTRONIC TECHNOLOGY PLC
Specifications
Flow Output 10 pulses/rev. with direction indication
Threshold
0.76m/min (2.5ft/min) in water
0.91m/min (3.0ft/min) in light oil
2.13m/min (7.0ft/min) in heavy oil
3.81m/min (12.5ft/min) in air
Max. Velocity 487.68m/min (1600 ft/min)
CSFM17HTF Type 6-arm Spring Bow Caged Spinner Flowmeter Mechanical
Section 1 11/16"body×4 1/2"casing
CSFM18HTF Type 6-arm Spring Bow Caged Spinner Flowmeter Mechanical
Section 1 11/16"body×5 1/2"casing
CSFM19HTF Type 6-arm Spring Bow Caged Spinner Flowmeter Mechanical
Section 1 11/16"body×7"casing
CSFM20HTF Type 6-arm Spring Bow Caged Spinner Flowmeter Mechanical
Section 1 11/16"body×9 5/8"casing
CSFM30HTF Type 4-arm Spring Bow Caged Spinner Flowmeter Mechanical
Section 1 11/16"body Applicable for 5 1/2"-7"casing
CSFM31HTF Type 4-arm Spring Bow Caged Spinner Flowmeter Mechanical
Section 1 11/16"body Applicable for 5"-7"casing
CSFM32HTF Type 4-arm Spring Bow Caged Spinner Flowmeter Mechanical
Section 1 11/16"body×5 1/2"casing
CSFM33HTF Type 4-arm Spring Bow Caged Spinner Flowmeter Mechanical
Section 1 11/16"body×4 1/2"casing
CSFM45HTF Type 4-arm Spring Bow Caged Spinner Flowmeter Mechanical
Section 1 11/16"body×9 5/8'' casing
CSFM
Production Logging Tools (PLT)
Flow Output 10 pulses/rev. w ith direction indication
Threshold
2.43m/min (8.0ft/min) in pure water
2.59m/min (8.5ft/min) in light oil
3.81m/min (12.5ft/min) in heavy oil
5.48m/min (18.0ft/min) in air
Max Fluid Velocity 609.6m/min (2000 ft/min)
IFBM01HTF Type Jeweled Bearing Flowmeter Mechanical
Section 1 11/16"body×1 11/16"shroud
IFBM09HTF Type Jeweled Bearing Flowmeter Mechanical
Section 1 11/16"body×2 1/8"shroud
IFBM
http://www.well-sun.com.cnXI’AN WELL-SUN ELECTRONIC TECHNOLOGY PLC
43mm & 35mm PLTs
Production Logging Tools (PLT)
43mm
(1 11/16'')
35mm
(1 3/8'')NOTES
CHT56 CHT57 5.6mm cable
CHT58 CHT59 8.2mm cable
HWT32 HWT33
PSC21 PSC16
WTC38 WTC37
SHT01 SHT02
DBC14 DBC15
DMC10 DMC09
QPC08 QPC06
GRT26 GRT24
DRC55 DRC70 Horizontal Well
DRC71 DRC72 Vertical Well
RCT11 RCT10 Vertical Well
FDR18 FDR16
FDA16 FDA17
CFB11 CFB10
DCT13 DCT12
NST16 NST26
NST23 NST27
HTF10 HTF08
CSFM17 CSFM14
CSFM18 CSFM15
CSFM19 CSFM16
CSFM20 N/A
CSFM30 CSFM34
CSFM31 CSFM35
CSFM32 CSFM36
CSFM33 N/A
CSFM45 N/A
CRFM17 CRFM14
CRFM18 CRFM15
CRFM19 CRFM16
CRFM20 N/A
IFJM01 IFJM02
IFJM09 IFJM07
IFJM11 IFJM12
IFJM13 IFJM14
IFJM19 IFJM15
IFBM01 IFBM02
OD
Interpretation Software-Kappa
Interpretation Sample 1
http://www.well-sun.com.cnXI’AN WELL-SUN ELECTRONIC TECHNOLOGY PLC
Interpretation Software-Kappa
Interpretation Sample 2
http://www.well-sun.com.cnXI’AN WELL-SUN ELECTRONIC TECHNOLOGY PLC
Production Logging Tools (PLT) Case Study
The purpose of logging is to monitor the well production.
The logging data are output in formats like lis, dlis, and las which are
applicable for clients’ different interpretation software like Kappa, etc.
Description
Interpretation Report
http://www.well-sun.com.cnXI’AN WELL-SUN ELECTRONIC TECHNOLOGY PLC
Analysis
The final crossplot represents the production from the zone between
1314.27m – 1319.26m.
Result
The interpretation result shows that the well has three production profiles,
respectively at 4330m, 4410m and 4490m, and through interpretation
software, the oil production and water production from the perforated zone
is visualized.
WTC
QPC
DRC
GRT
DRC
HTF
CSFM
FDA