▌S330/2HV, S330/3HV

▌SA1318WPC

METRIC DRAWING

▌SA460WPC

METRIC DRAWING

A A

METRIC DRAWING

A A

▌SA330WPC

METRIC DRAWING

METRIC DRAWING

METRIC DRAWING

▌W2543M, WS2543M, & W2543A

▲ Please note the fencing shown in the W2543M floorplanaboveisnotutlizied.

▌PRODUCT SPECIFICATIONS & DIMENSIONS

Capacity S330/2HV & S330/3HV SA330WPC SA1318WPC SA460WPC90° Round 13” (330 mm) 13” (330 mm) Min Remnant 9 1/4” 13” (330 mm) Min Remnant 9” 18” (460 mm) Min Remnant 9 1/4”90° Rectangle 12” H x 18” W (300 x 460 mm) 13” H x 16” W (330 x 406 mm) 13” H x 16” W (330 x 405 mm)

9”Hx18”MaxWidth(228.5x457mm)15” H x 24” W (380 x 610 mm)18”H23”MaxWidth(460x580mm)

90° Square 12” (300 mm) 13” (330 mm) 13” (330 mm) 18” (460 mm)45° Round 13” (330 mm) 11” (280 mm) 11.8”(300mm) 15” (380 mm)45° Rectangle 11” x 12” (280 x 330 mm) 11” x 13” (280 x 330 mm) 9.4”Hx13”W(240x330mm) 15” x 15” (380 x 380 mm)60° Round 9.5”(240mm) NA 7”(178mm) NA60° Rectangle 11” x 8” (280 x 203mm) NA 7.4”Hx11”W(188x280mm) NA

BladeSpeed▪S330/2HV▪S330/3HV

▪60-330FPMInverterDrive▪105,175,270,375FPMStepPulley

95-295SFPM(29-90m/min)

108-340FPM(33-105m/min)

65-330SFPM(20-101m/min)

BladeSize 13’6”X1”X.035” 1”X.035”X13’7” 1.25”x.042”x16’4” 1-1/2”X.050”X17-6”BladeDrive 3HP(1.5kW) 5HP(3.75kW) 5HP(3.75kW) 5HP(3.75kW)HydraulicPump 1/2HP(0.375kW) 1HP(.75kW) 1HP(.75kW) 1HP(.75kW)CoolantPump 1/8HP(0.09kW) 1/8HP(.1kW) 1/8HP(.1kW) 1/6HP(.12kW)TableHeight 30.5”(775mm) 32.7”(830mm) 34.3”(870mm) 36.4”(925mm)Machine Weight 1800lbs(850kg) 3,175lbs(1440kg) 4,300lbs(1950kg) 6,000lbs(2721kg)

ShuttleLength NA 27.6”(700mm)999.999”MaxPartLength

27.6”(700mm)999.999”MaxPartLength

27.6”(700mm)999.999”MaxPartLength

MaxMaterialWeightforShuttleIndex NA 4,410lbs(2000kg) 5,070lbs(2300kg) 8,820lbs(4000kg)

S330/SA330/SA1318/SA460

HORIZONTAL MITERINGS330/2HV • S330/3HV • SA330WPC • SA1318WPC • SA460WPC

W2543M • WS2543M • W2543A

Capacity W2543M W2543A WS2543M90° Round 28”(711mm) 28”(711mm) 28"(711mm)90° Nominal Rectanglar 27”Hx44”W(685.8x1117.6mm) 27”Hx44”W(685.8x1117.6mm) 27”Hx44”W(685.8x1117.6mm)45° Round N/A N/A 28"(711mm)45° Nominal Rectanglar N/A N/A 27’’x25.6”(685.8x650mm)60° Round N/A N/A 25.6”(650mm)60° Nominal Rectanglar N/A N/A 25.6”Hx15.75”W(650x400mm)

BladeSpeed 98-361FPM(30-110m/min.) 98-361FPM(30-110m/min.) 98-361FPM(30-110m/min.)

BladeSize 2”x28’6-1/2”x.063”(54x8700x1.6mm) 2”x28’6-1/2”x.063”(54x8700x1.6mm) 2”x28’6-1/2”x.063”(54x8700x1.6mm)BladeDrive 10H.P.(7.5kW) 10H.P.(7.5kW) 10H.P.(7.5kW)HydraulicPump 3HP(2.2kW) 3HP(2.2kW) 3H.P.(2.2kW)CoolantMotor 1/4 HP (180W) 1/4 HP (180W) 1/4HP,(180W)WireBrushMotor 1/12 HP (60W) 1/12 HP (60W) 1/12 HP (60W)RollMotor NA NA 1.5HP(1.1kW)TableRotation NA NA 1/2HP,(400W)ShuttleLength NA 59”(1500mm)999.999”MaxPartLength NAShuttleIndex NA 11,020lbs(5000kg) NAMachine Weight 9,500lbs(4300kg) 16,940(7700kg)grossweight 11,880lbs(5400kg)MachineFloorSpace 101”Hx179”Wx89.37”D

(2560Hx4550Wx2270mmD)108.26”Hx179”Wx89.37”D(2750Hx4550Wx2270mmD)

101”Hx179”Wx89.37”D(2560Hx4550Wx2270mmD)

TableHeight 32’ ~ 33’ (810 ~ 850 mm) withAdjustablePad 33’~34’(840~870mm)withAdjustablePad 32’ ~ 33’ (830 ~ 850 mm) withAdjustablePad

W2543M/W2543A/WS2543M

Before using this product, please read the operator's manual carefully and follow all applicable instructions. ●Whenusingourproducts,safetyequipmentisrequireddependingonheoperationaltask.

*Specifications,appearanceandequipmentaresubjecttochangewithoutnoticebyreasonofimprovement.*PleaseusethemachinemodelnameasS330/2HV,S330/3HV,SA330WPC,SA1318WPC,SA460WPC,W2543M,WS2543M,orW2543Awhenapplyingforadministrationapplications.*Foranyinquires,pleasecontactlocalAmadaMachineryAmerica,Inc.office.

© AMADA MACHINERY AMERICA, INC. AllRightsReserved.

www.amadamca.com

▲▲!

▌PRODUCT SPECIFICATIONS & DIMENSIONS

100SPuenteSt·Brea,CA92821Phone: 847.285.4800 · Fax:847.519.2127

▐STANDARD FEATURES

S330/2HV • S330/3HV

• SPEED RANGE: The S330/2HVbladespeedisinfinitelyvariablethroughanInverter Driveheavy-dutywormgeartransmission.Bladespeedsare60-330feetperminute (18-100 meters per minute). The S330/3HV uses a 4 speed step pulley. Bladespeedsare105,175,270and375feetperminute(32,53,82,and114 metersperminute).Thebroadspeedrangeallowsforoptimumcuttingofalarge spectrumofmaterials.

• HYDRAULIC DOWN FEED: Infinitelyvariablefeedrateishydraulically controlledforfast,accuratecutting.Settingsaremadeattheoperator’scontrolstation.

• HYDRAULIC AUTO FRAME RETURN: Thesawframewillautomatically raisehydraulicallyattheendofasawcut.Thesawframecanalsobelifted hyraulicallywiththepushbuttonswtich.

• BLADE GUIDES: CarbideBladeGuidesprovidereducedvibration,heatand bladestressprovidinglongerbladelife.

• CHIP BRUSH: Poweredfromthedrivewheelofthesaw,thebrushchangesspeed withthebladetoassurethatchipsarebeingremovedfromeachgullet,improving cuttingperformanceandbladelife.

• VISE JAW: Hydraulicrackandpawlvisedesignclampsandholdstheworkpiece securely.Theviseisoperatedbyaselectorswitchlocatedontheoperator’scontrolpanel.

• SWIVEL MITER: Thesawframeswivelsafull60degreestotherearand45 degreestothefrontforoptimummitercuttingcapability.Stopsareprovidedat-60and +45degrees.

• OPERATORS CONTROL PANEL: Operationofthemachineissafeand convenientfromtheswingarmpedestalmountedonthemachinebase.Control Voltageis110V.

• 16” (407 MM) DIAMETER CAST IRON BLADE WHEELS• 30.5” (775 MM) WORK HEIGHT • BUILT IN COOLANT SYSTEM • ADJUSTABLE GUIDE ARM WITH DOVE TAIL SLIDE

▐ MOST POPULAR OPTIONAL FEATURES • AUTOMATIC MIST LUBE• VARIABLE VISE PRESSURE• FREE STANDING ROLLER TABLE

*Picturesmayincludesomeoptionalequipment.*Somesafetyequipmentmayhavebeenremovedoropenedtoillustrate productsclearlyandmustbeinplace,andfunctioning,priortooperation.

▐STANDARD FEATURES

W2543M • WS2543M • W2543A

• SAW FRAME: Thesawframeiscantedata6.5degreeangleforfastercuttingofstructuralandotherflatmaterials.Theheavyduty sawframeridesupanddownalinearwayguidesystem.

• MITER CUTTING: TheWS2543Mmodelhasasawbasethatswivelsto45degreesonedirectionand60degreestheother,formiter cutting.A½hp(400W.)motorturnsthemachinebaseandthedegreeofangleisreadoutonaLEDDISPLAY.

• SPEED RANGE: 98-361FPM(30-110m/min.).InfinitelyvariablethroughafrequencyinvertersystemandaheavydutyWormGear Transmission.Thebroadspeedrangeallowsforoptimumcuttingofalargespectrumofmaterials.AnElectricTachometerassures accuratespeedsettings.

• HYDRAULIC DOWN FEED: Feedrateanddownpressurecanbecontrolledforfast,accuratecutting.Setupismadeeasythrough thecolor-codeddialallowingtheoperatortoselecttheoptimumsettingforthetypeofmaterialbeingcut.

• BLADE GUIDES: Acombinationofrollerbearingandhydraulicallyactuatedcarbidebladeguidesassuresthebladeisheldtautfor fast,accuratecuts.ThecastironMovableGuideArmispositionedthroughaHydraulicCylinder,thenisHydraulicallyLockedinposition.

• FAST APPROACH: Workheightismanuallysetallowingtheheadtoraisejustenoughtocleartheworkpiece,reducingcycletime andallowingforfastercuttingperformance.

• CHIP BRUSH: AnIndependentMotordrivesthebladecleaningChipBrushtoassurecompleteremovalofchipsfromeachgulletof theblade,providingoptimumcuttingperformanceandenhancedbladelife.

• VISE JAW: FullStrokingViseJawandaVerticalClampDeviceassuretheworkpieceissecureandeliminatesexcessivevibration duringthecutprovidingbetterbladelifeandcleanercuts.MinimumClampingCapacityis7.5”(190mm)width.

• CONTROLS: AnIndependentElectricCabinetandControlPanelallowtheoperatortopositionthecontrolsforoptimumviewingof thecuttingarea.APLCcontrolsallelectricalandhydraulicfunctions.

• AMADA SST-WS BLADE: AmadaSSTWideSetblade28’6-1/2”longx2”wide,3/4toothpitch.Thisisthestandardbladethatis includedwithmachinepurchase.

BLADE TENSION

FREQUENCY INVERTER DRIVE

HYDRAULIC VISE JAW RACK

▐STANDARD FEATURES

SA330WPC • SA1318WPC • SA460WPC

• SPEED RANGE: Infinitely variable through an inverter drive and a heavy-duty worm gear transmission. The broad speed range allows for optimum cutting of a largespectrumofmaterials.Theonscreentachometerassuresaccuratespeedsetting.

• HYDRAULIC DOWN FEED: Feedrateanddownpressurecanbecontrolledfor fast,accuratecutting.Setupismadeeasythroughthecolor-codeddialallowingthe operatortoselecttheoptimumsettingforthetypeofmaterialbeingcut.Both settingsaremadeattheoperator’sstation.

• HYDRAULIC SHUTTLE FEED: Lengthsettingsof0-27.56”(0-700mm)are accomplishedwithsimpleprogrammingattheoperator’stouchscreen.Theshuttle comestopositivestopsatbothendsoftheindex,assuringcutofflengthaccuracy, reducingmaterialloss.Repeatabilityis+.005”perindex.

• PC PROGRAMMABLE CONTROL: Convenientlylocatedontheoperator’s controlpanel,thistouchscreencontrolallowstheoperatortoprogramandstoreup totenjobs.InputsincludePartLengthfrom0-999.999”andNumberofPiecestobe cut.TheBladeSpeed isdisplayedonandsetusing the touchscreen,but isnot stored inmemory.TheAutomaticPieceCounterstopseach jobwhenthepre-set numberofcutshasbeenmade.

• BLADE GUIDES: Thecarbidebladeguidesprovideaccuraciesof+.002perinch (.051mm)ofcutmaterial.

• OUT-OF-STOCK SWITCH: Themachinewillshutoffautomaticallywhenmaterial isnolongerpresentintherearvisejaws,allowingfortrulyautomaticoperation.

• FULL STROKING HYDRAULIC VISE JAWS: Hydraulicvicesholdthework piece,providingaccuratecutsandlongerbladelife.

• SHUTTLE VISE: Theshuttlevisejawfloatshydraulicallytoaccommodatecrooked stockassuringstraight,accuratecuts.Remnantlengthis9.5”(241mm).

▐ MOST POPULAR OPTIONAL FEATURES • AUTO MIST LUBE• HYDRAULIC HOLD DOWNS• AUTOMATIC CHIP REMOVAL• EXTENSION DEAD ROLLER TABLE• VARIABLE VISE PRESSURE CONTROLS• FIRST SECTION DEAD ROLLER TABLE

VARIABLE VISE PRESSURE

CHIP CONVEYOR

AUTO MIST LUBE

ALIGNMENT GUIDE & BUNDLE CLAMP

PC PROGRAMMABLE CONTROL

HYDRAULIC BLADE TENSION

FREE STANDING CONTROL CHIP CONVEYORSWIVEL BASE

▐ OPTIONAL FEATURES• AUTOMATIC CHIP CONVEYOR• HYDRAULIC HOLD DOWN• DEAD ROLLER TABLE

4 SPEED STEP PULLEY BLADE DRIVE

HORIZONTAL MITERING SAWS HORIZONTAL MITERING SAWS

▐STANDARD FEATURES

S330/2HV • S330/3HV

• SPEED RANGE: The S330/2HVbladespeedisinfinitelyvariablethroughanInverter Driveheavy-dutywormgeartransmission.Bladespeedsare60-330feetperminute (18-100 meters per minute). The S330/3HV uses a 4 speed step pulley. Bladespeedsare105,175,270and375feetperminute(32,53,82,and114 metersperminute).Thebroadspeedrangeallowsforoptimumcuttingofalarge spectrumofmaterials.

• HYDRAULIC DOWN FEED: Infinitelyvariablefeedrateishydraulically controlledforfast,accuratecutting.Settingsaremadeattheoperator’scontrolstation.

• HYDRAULIC AUTO FRAME RETURN: Thesawframewillautomatically raisehydraulicallyattheendofasawcut.Thesawframecanalsobelifted hyraulicallywiththepushbuttonswtich.

• BLADE GUIDES: CarbideBladeGuidesprovidereducedvibration,heatand bladestressprovidinglongerbladelife.

• CHIP BRUSH: Poweredfromthedrivewheelofthesaw,thebrushchangesspeed withthebladetoassurethatchipsarebeingremovedfromeachgullet,improving cuttingperformanceandbladelife.

• VISE JAW: Hydraulicrackandpawlvisedesignclampsandholdstheworkpiece securely.Theviseisoperatedbyaselectorswitchlocatedontheoperator’scontrolpanel.

• SWIVEL MITER: Thesawframeswivelsafull60degreestotherearand45 degreestothefrontforoptimummitercuttingcapability.Stopsareprovidedat-60and +45degrees.

• OPERATORS CONTROL PANEL: Operationofthemachineissafeand convenientfromtheswingarmpedestalmountedonthemachinebase.Control Voltageis110V.

• 16” (407 MM) DIAMETER CAST IRON BLADE WHEELS• 30.5” (775 MM) WORK HEIGHT • BUILT IN COOLANT SYSTEM • ADJUSTABLE GUIDE ARM WITH DOVE TAIL SLIDE

▐ MOST POPULAR OPTIONAL FEATURES • AUTOMATIC MIST LUBE• VARIABLE VISE PRESSURE• FREE STANDING ROLLER TABLE

*Picturesmayincludesomeoptionalequipment.*Somesafetyequipmentmayhavebeenremovedoropenedtoillustrate productsclearlyandmustbeinplace,andfunctioning,priortooperation.

▐STANDARD FEATURES

W2543M • WS2543M • W2543A

• SAW FRAME: Thesawframeiscantedata6.5degreeangleforfastercuttingofstructuralandotherflatmaterials.Theheavyduty sawframeridesupanddownalinearwayguidesystem.

• MITER CUTTING: TheWS2543Mmodelhasasawbasethatswivelsto45degreesonedirectionand60degreestheother,formiter cutting.A½hp(400W.)motorturnsthemachinebaseandthedegreeofangleisreadoutonaLEDDISPLAY.

• SPEED RANGE: 98-361FPM(30-110m/min.).InfinitelyvariablethroughafrequencyinvertersystemandaheavydutyWormGear Transmission.Thebroadspeedrangeallowsforoptimumcuttingofalargespectrumofmaterials.AnElectricTachometerassures accuratespeedsettings.

• HYDRAULIC DOWN FEED: Feedrateanddownpressurecanbecontrolledforfast,accuratecutting.Setupismadeeasythrough thecolor-codeddialallowingtheoperatortoselecttheoptimumsettingforthetypeofmaterialbeingcut.

• BLADE GUIDES: Acombinationofrollerbearingandhydraulicallyactuatedcarbidebladeguidesassuresthebladeisheldtautfor fast,accuratecuts.ThecastironMovableGuideArmispositionedthroughaHydraulicCylinder,thenisHydraulicallyLockedinposition.

• FAST APPROACH: Workheightismanuallysetallowingtheheadtoraisejustenoughtocleartheworkpiece,reducingcycletime andallowingforfastercuttingperformance.

• CHIP BRUSH: AnIndependentMotordrivesthebladecleaningChipBrushtoassurecompleteremovalofchipsfromeachgulletof theblade,providingoptimumcuttingperformanceandenhancedbladelife.

• VISE JAW: FullStrokingViseJawandaVerticalClampDeviceassuretheworkpieceissecureandeliminatesexcessivevibration duringthecutprovidingbetterbladelifeandcleanercuts.MinimumClampingCapacityis7.5”(190mm)width.

• CONTROLS: AnIndependentElectricCabinetandControlPanelallowtheoperatortopositionthecontrolsforoptimumviewingof thecuttingarea.APLCcontrolsallelectricalandhydraulicfunctions.

• AMADA SST-WS BLADE: AmadaSSTWideSetblade28’6-1/2”longx2”wide,3/4toothpitch.Thisisthestandardbladethatis includedwithmachinepurchase.

BLADE TENSION

FREQUENCY INVERTER DRIVE

HYDRAULIC VISE JAW RACK

▐STANDARD FEATURES

SA330WPC • SA1318WPC • SA460WPC

• SPEED RANGE: Infinitely variable through an inverter drive and a heavy-duty worm gear transmission. The broad speed range allows for optimum cutting of a largespectrumofmaterials.Theonscreentachometerassuresaccuratespeedsetting.

• HYDRAULIC DOWN FEED: Feedrateanddownpressurecanbecontrolledfor fast,accuratecutting.Setupismadeeasythroughthecolor-codeddialallowingthe operatortoselecttheoptimumsettingforthetypeofmaterialbeingcut.Both settingsaremadeattheoperator’sstation.

• HYDRAULIC SHUTTLE FEED: Lengthsettingsof0-27.56”(0-700mm)are accomplishedwithsimpleprogrammingattheoperator’stouchscreen.Theshuttle comestopositivestopsatbothendsoftheindex,assuringcutofflengthaccuracy, reducingmaterialloss.Repeatabilityis+.005”perindex.

• PC PROGRAMMABLE CONTROL: Convenientlylocatedontheoperator’s controlpanel,thistouchscreencontrolallowstheoperatortoprogramandstoreup totenjobs.InputsincludePartLengthfrom0-999.999”andNumberofPiecestobe cut.TheBladeSpeed isdisplayedonandsetusing the touchscreen,but isnot stored inmemory.TheAutomaticPieceCounterstopseach jobwhenthepre-set numberofcutshasbeenmade.

• BLADE GUIDES: Thecarbidebladeguidesprovideaccuraciesof+.002perinch (.051mm)ofcutmaterial.

• OUT-OF-STOCK SWITCH: Themachinewillshutoffautomaticallywhenmaterial isnolongerpresentintherearvisejaws,allowingfortrulyautomaticoperation.

• FULL STROKING HYDRAULIC VISE JAWS: Hydraulicvicesholdthework piece,providingaccuratecutsandlongerbladelife.

• SHUTTLE VISE: Theshuttlevisejawfloatshydraulicallytoaccommodatecrooked stockassuringstraight,accuratecuts.Remnantlengthis9.5”(241mm).

▐ MOST POPULAR OPTIONAL FEATURES • AUTO MIST LUBE• HYDRAULIC HOLD DOWNS• AUTOMATIC CHIP REMOVAL• EXTENSION DEAD ROLLER TABLE• VARIABLE VISE PRESSURE CONTROLS• FIRST SECTION DEAD ROLLER TABLE

VARIABLE VISE PRESSURE

CHIP CONVEYOR

AUTO MIST LUBE

ALIGNMENT GUIDE & BUNDLE CLAMP

PC PROGRAMMABLE CONTROL

HYDRAULIC BLADE TENSION

FREE STANDING CONTROL CHIP CONVEYORSWIVEL BASE

▐ OPTIONAL FEATURES• AUTOMATIC CHIP CONVEYOR• HYDRAULIC HOLD DOWN• DEAD ROLLER TABLE

4 SPEED STEP PULLEY BLADE DRIVE

HORIZONTAL MITERING SAWS HORIZONTAL MITERING SAWS

▐STANDARD FEATURES

S330/2HV • S330/3HV

• SPEED RANGE: The S330/2HVbladespeedisinfinitelyvariablethroughanInverter Driveheavy-dutywormgeartransmission.Bladespeedsare60-330feetperminute (18-100 meters per minute). The S330/3HV uses a 4 speed step pulley. Bladespeedsare105,175,270and375feetperminute(32,53,82,and114 metersperminute).Thebroadspeedrangeallowsforoptimumcuttingofalarge spectrumofmaterials.

• HYDRAULIC DOWN FEED: Infinitelyvariablefeedrateishydraulically controlledforfast,accuratecutting.Settingsaremadeattheoperator’scontrolstation.

• HYDRAULIC AUTO FRAME RETURN: Thesawframewillautomatically raisehydraulicallyattheendofasawcut.Thesawframecanalsobelifted hyraulicallywiththepushbuttonswtich.

• BLADE GUIDES: CarbideBladeGuidesprovidereducedvibration,heatand bladestressprovidinglongerbladelife.

• CHIP BRUSH: Poweredfromthedrivewheelofthesaw,thebrushchangesspeed withthebladetoassurethatchipsarebeingremovedfromeachgullet,improving cuttingperformanceandbladelife.

• VISE JAW: Hydraulicrackandpawlvisedesignclampsandholdstheworkpiece securely.Theviseisoperatedbyaselectorswitchlocatedontheoperator’scontrolpanel.

• SWIVEL MITER: Thesawframeswivelsafull60degreestotherearand45 degreestothefrontforoptimummitercuttingcapability.Stopsareprovidedat-60and +45degrees.

• OPERATORS CONTROL PANEL: Operationofthemachineissafeand convenientfromtheswingarmpedestalmountedonthemachinebase.Control Voltageis110V.

• 16” (407 MM) DIAMETER CAST IRON BLADE WHEELS• 30.5” (775 MM) WORK HEIGHT • BUILT IN COOLANT SYSTEM • ADJUSTABLE GUIDE ARM WITH DOVE TAIL SLIDE

▐ MOST POPULAR OPTIONAL FEATURES • AUTOMATIC MIST LUBE• VARIABLE VISE PRESSURE• FREE STANDING ROLLER TABLE

*Picturesmayincludesomeoptionalequipment.*Somesafetyequipmentmayhavebeenremovedoropenedtoillustrate productsclearlyandmustbeinplace,andfunctioning,priortooperation.

▐STANDARD FEATURES

W2543M • WS2543M • W2543A

• SAW FRAME: Thesawframeiscantedata6.5degreeangleforfastercuttingofstructuralandotherflatmaterials.Theheavyduty sawframeridesupanddownalinearwayguidesystem.

• MITER CUTTING: TheWS2543Mmodelhasasawbasethatswivelsto45degreesonedirectionand60degreestheother,formiter cutting.A½hp(400W.)motorturnsthemachinebaseandthedegreeofangleisreadoutonaLEDDISPLAY.

• SPEED RANGE: 98-361FPM(30-110m/min.).InfinitelyvariablethroughafrequencyinvertersystemandaheavydutyWormGear Transmission.Thebroadspeedrangeallowsforoptimumcuttingofalargespectrumofmaterials.AnElectricTachometerassures accuratespeedsettings.

• HYDRAULIC DOWN FEED: Feedrateanddownpressurecanbecontrolledforfast,accuratecutting.Setupismadeeasythrough thecolor-codeddialallowingtheoperatortoselecttheoptimumsettingforthetypeofmaterialbeingcut.

• BLADE GUIDES: Acombinationofrollerbearingandhydraulicallyactuatedcarbidebladeguidesassuresthebladeisheldtautfor fast,accuratecuts.ThecastironMovableGuideArmispositionedthroughaHydraulicCylinder,thenisHydraulicallyLockedinposition.

• FAST APPROACH: Workheightismanuallysetallowingtheheadtoraisejustenoughtocleartheworkpiece,reducingcycletime andallowingforfastercuttingperformance.

• CHIP BRUSH: AnIndependentMotordrivesthebladecleaningChipBrushtoassurecompleteremovalofchipsfromeachgulletof theblade,providingoptimumcuttingperformanceandenhancedbladelife.

• VISE JAW: FullStrokingViseJawandaVerticalClampDeviceassuretheworkpieceissecureandeliminatesexcessivevibration duringthecutprovidingbetterbladelifeandcleanercuts.MinimumClampingCapacityis7.5”(190mm)width.

• CONTROLS: AnIndependentElectricCabinetandControlPanelallowtheoperatortopositionthecontrolsforoptimumviewingof thecuttingarea.APLCcontrolsallelectricalandhydraulicfunctions.

• AMADA SST-WS BLADE: AmadaSSTWideSetblade28’6-1/2”longx2”wide,3/4toothpitch.Thisisthestandardbladethatis includedwithmachinepurchase.

BLADE TENSION

FREQUENCY INVERTER DRIVE

HYDRAULIC VISE JAW RACK

▐STANDARD FEATURES

SA330WPC • SA1318WPC • SA460WPC

• SPEED RANGE: Infinitely variable through an inverter drive and a heavy-duty worm gear transmission. The broad speed range allows for optimum cutting of a largespectrumofmaterials.Theonscreentachometerassuresaccuratespeedsetting.

• HYDRAULIC DOWN FEED: Feedrateanddownpressurecanbecontrolledfor fast,accuratecutting.Setupismadeeasythroughthecolor-codeddialallowingthe operatortoselecttheoptimumsettingforthetypeofmaterialbeingcut.Both settingsaremadeattheoperator’sstation.

• HYDRAULIC SHUTTLE FEED: Lengthsettingsof0-27.56”(0-700mm)are accomplishedwithsimpleprogrammingattheoperator’stouchscreen.Theshuttle comestopositivestopsatbothendsoftheindex,assuringcutofflengthaccuracy, reducingmaterialloss.Repeatabilityis+.005”perindex.

• PC PROGRAMMABLE CONTROL: Convenientlylocatedontheoperator’s controlpanel,thistouchscreencontrolallowstheoperatortoprogramandstoreup totenjobs.InputsincludePartLengthfrom0-999.999”andNumberofPiecestobe cut.TheBladeSpeed isdisplayedonandsetusing the touchscreen,but isnot stored inmemory.TheAutomaticPieceCounterstopseach jobwhenthepre-set numberofcutshasbeenmade.

• BLADE GUIDES: Thecarbidebladeguidesprovideaccuraciesof+.002perinch (.051mm)ofcutmaterial.

• OUT-OF-STOCK SWITCH: Themachinewillshutoffautomaticallywhenmaterial isnolongerpresentintherearvisejaws,allowingfortrulyautomaticoperation.

• FULL STROKING HYDRAULIC VISE JAWS: Hydraulicvicesholdthework piece,providingaccuratecutsandlongerbladelife.

• SHUTTLE VISE: Theshuttlevisejawfloatshydraulicallytoaccommodatecrooked stockassuringstraight,accuratecuts.Remnantlengthis9.5”(241mm).

▐ MOST POPULAR OPTIONAL FEATURES • AUTO MIST LUBE• HYDRAULIC HOLD DOWNS• AUTOMATIC CHIP REMOVAL• EXTENSION DEAD ROLLER TABLE• VARIABLE VISE PRESSURE CONTROLS• FIRST SECTION DEAD ROLLER TABLE

VARIABLE VISE PRESSURE

CHIP CONVEYOR

AUTO MIST LUBE

ALIGNMENT GUIDE & BUNDLE CLAMP

PC PROGRAMMABLE CONTROL

HYDRAULIC BLADE TENSION

FREE STANDING CONTROL CHIP CONVEYORSWIVEL BASE

▐ OPTIONAL FEATURES• AUTOMATIC CHIP CONVEYOR• HYDRAULIC HOLD DOWN• DEAD ROLLER TABLE

4 SPEED STEP PULLEY BLADE DRIVE

HORIZONTAL MITERING SAWS HORIZONTAL MITERING SAWS

▌S330/2HV, S330/3HV

▌SA1318WPC

METRIC DRAWING

▌SA460WPC

METRIC DRAWING

A A

METRIC DRAWING

A A

▌SA330WPC

METRIC DRAWING

METRIC DRAWING

METRIC DRAWING

▌W2543M, WS2543M, & W2543A

▲ Please note the fencing shown in the W2543M floorplanaboveisnotutlizied.

▌PRODUCT SPECIFICATIONS & DIMENSIONS

Capacity S330/2HV & S330/3HV SA330WPC SA1318WPC SA460WPC90° Round 13” (330 mm) 13” (330 mm) Min Remnant 9 1/4” 13” (330 mm) Min Remnant 9” 18” (460 mm) Min Remnant 9 1/4”90° Rectangle 12” H x 18” W (300 x 460 mm) 13” H x 16” W (330 x 406 mm) 13” H x 16” W (330 x 405 mm)

9”Hx18”MaxWidth(228.5x457mm)15” H x 24” W (380 x 610 mm)18”H23”MaxWidth(460x580mm)

90° Square 12” (300 mm) 13” (330 mm) 13” (330 mm) 18” (460 mm)45° Round 13” (330 mm) 11” (280 mm) 11.8”(300mm) 15” (380 mm)45° Rectangle 11” x 12” (280 x 330 mm) 11” x 13” (280 x 330 mm) 9.4”Hx13”W(240x330mm) 15” x 15” (380 x 380 mm)60° Round 9.5”(240mm) NA 7”(178mm) NA60° Rectangle 11” x 8” (280 x 203mm) NA 7.4”Hx11”W(188x280mm) NA

BladeSpeed▪S330/2HV▪S330/3HV

▪60-330FPMInverterDrive▪105,175,270,375FPMStepPulley

95-295SFPM(29-90m/min)

108-340FPM(33-105m/min)

65-330SFPM(20-101m/min)

BladeSize 13’6”X1”X.035” 1”X.035”X13’7” 1.25”x.042”x16’4” 1-1/2”X.050”X17-6”BladeDrive 3HP(1.5kW) 5HP(3.75kW) 5HP(3.75kW) 5HP(3.75kW)HydraulicPump 1/2HP(0.375kW) 1HP(.75kW) 1HP(.75kW) 1HP(.75kW)CoolantPump 1/8HP(0.09kW) 1/8HP(.1kW) 1/8HP(.1kW) 1/6HP(.12kW)TableHeight 30.5”(775mm) 32.7”(830mm) 34.3”(870mm) 36.4”(925mm)Machine Weight 1800lbs(850kg) 3,175lbs(1440kg) 4,300lbs(1950kg) 6,000lbs(2721kg)

ShuttleLength NA 27.6”(700mm)999.999”MaxPartLength

27.6”(700mm)999.999”MaxPartLength

27.6”(700mm)999.999”MaxPartLength

MaxMaterialWeightforShuttleIndex NA 4,410lbs(2000kg) 5,070lbs(2300kg) 8,820lbs(4000kg)

S330/SA330/SA1318/SA460

HORIZONTAL MITERINGS330/2HV • S330/3HV • SA330WPC • SA1318WPC • SA460WPC

W2543M • WS2543M • W2543A

Capacity W2543M W2543A WS2543M90° Round 28”(711mm) 28”(711mm) 28"(711mm)90° Nominal Rectanglar 27”Hx44”W(685.8x1117.6mm) 27”Hx44”W(685.8x1117.6mm) 27”Hx44”W(685.8x1117.6mm)45° Round N/A N/A 28"(711mm)45° Nominal Rectanglar N/A N/A 27’’x25.6”(685.8x650mm)60° Round N/A N/A 25.6”(650mm)60° Nominal Rectanglar N/A N/A 25.6”Hx15.75”W(650x400mm)

BladeSpeed 98-361FPM(30-110m/min.) 98-361FPM(30-110m/min.) 98-361FPM(30-110m/min.)

BladeSize 2”x28’6-1/2”x.063”(54x8700x1.6mm) 2”x28’6-1/2”x.063”(54x8700x1.6mm) 2”x28’6-1/2”x.063”(54x8700x1.6mm)BladeDrive 10H.P.(7.5kW) 10H.P.(7.5kW) 10H.P.(7.5kW)HydraulicPump 3HP(2.2kW) 3HP(2.2kW) 3H.P.(2.2kW)CoolantMotor 1/4 HP (180W) 1/4 HP (180W) 1/4HP,(180W)WireBrushMotor 1/12 HP (60W) 1/12 HP (60W) 1/12 HP (60W)RollMotor NA NA 1.5HP(1.1kW)TableRotation NA NA 1/2HP,(400W)ShuttleLength NA 59”(1500mm)999.999”MaxPartLength NAShuttleIndex NA 11,020lbs(5000kg) NAMachine Weight 9,500lbs(4300kg) 16,940(7700kg)grossweight 11,880lbs(5400kg)MachineFloorSpace 101”Hx179”Wx89.37”D

(2560Hx4550Wx2270mmD)108.26”Hx179”Wx89.37”D(2750Hx4550Wx2270mmD)

101”Hx179”Wx89.37”D(2560Hx4550Wx2270mmD)

TableHeight 32’ ~ 33’ (810 ~ 850 mm) withAdjustablePad 33’~34’(840~870mm)withAdjustablePad 32’ ~ 33’ (830 ~ 850 mm) withAdjustablePad

W2543M/W2543A/WS2543M

Before using this product, please read the operator's manual carefully and follow all applicable instructions. ●Whenusingourproducts,safetyequipmentisrequireddependingonheoperationaltask.

*Specifications,appearanceandequipmentaresubjecttochangewithoutnoticebyreasonofimprovement.*PleaseusethemachinemodelnameasS330/2HV,S330/3HV,SA330WPC,SA1318WPC,SA460WPC,W2543M,WS2543M,orW2543Awhenapplyingforadministrationapplications.*Foranyinquires,pleasecontactlocalAmadaMachineryAmerica,Inc.office.

© AMADA MACHINERY AMERICA, INC. AllRightsReserved.

www.amadamca.com

▲▲!

▌PRODUCT SPECIFICATIONS & DIMENSIONS

100SPuenteSt·Brea,CA92821Phone: 847.285.4800 · Fax:847.519.2127

▌S330/2HV, S330/3HV

▌SA1318WPC

METRIC DRAWING

▌SA460WPC

METRIC DRAWING

A A

METRIC DRAWING

A A

▌SA330WPC

METRIC DRAWING

METRIC DRAWING

METRIC DRAWING

▌W2543M, WS2543M, & W2543A

▲ Please note the fencing shown in the W2543M floorplanaboveisnotutlizied.

▌PRODUCT SPECIFICATIONS & DIMENSIONS

Capacity S330/2HV & S330/3HV SA330WPC SA1318WPC SA460WPC90° Round 13” (330 mm) 13” (330 mm) Min Remnant 9 1/4” 13” (330 mm) Min Remnant 9” 18” (460 mm) Min Remnant 9 1/4”90° Rectangle 12” H x 18” W (300 x 460 mm) 13” H x 16” W (330 x 406 mm) 13” H x 16” W (330 x 405 mm)

9”Hx18”MaxWidth(228.5x457mm)15” H x 24” W (380 x 610 mm)18”H23”MaxWidth(460x580mm)

90° Square 12” (300 mm) 13” (330 mm) 13” (330 mm) 18” (460 mm)45° Round 13” (330 mm) 11” (280 mm) 11.8”(300mm) 15” (380 mm)45° Rectangle 11” x 12” (280 x 330 mm) 11” x 13” (280 x 330 mm) 9.4”Hx13”W(240x330mm) 15” x 15” (380 x 380 mm)60° Round 9.5”(240mm) NA 7”(178mm) NA60° Rectangle 11” x 8” (280 x 203mm) NA 7.4”Hx11”W(188x280mm) NA

BladeSpeed▪S330/2HV▪S330/3HV

▪60-330FPMInverterDrive▪105,175,270,375FPMStepPulley

95-295SFPM(29-90m/min)

108-340FPM(33-105m/min)

65-330SFPM(20-101m/min)

BladeSize 13’6”X1”X.035” 1”X.035”X13’7” 1.25”x.042”x16’4” 1-1/2”X.050”X17-6”BladeDrive 3HP(1.5kW) 5HP(3.75kW) 5HP(3.75kW) 5HP(3.75kW)HydraulicPump 1/2HP(0.375kW) 1HP(.75kW) 1HP(.75kW) 1HP(.75kW)CoolantPump 1/8HP(0.09kW) 1/8HP(.1kW) 1/8HP(.1kW) 1/6HP(.12kW)TableHeight 30.5”(775mm) 32.7”(830mm) 34.3”(870mm) 36.4”(925mm)Machine Weight 1800lbs(850kg) 3,175lbs(1440kg) 4,300lbs(1950kg) 6,000lbs(2721kg)

ShuttleLength NA 27.6”(700mm)999.999”MaxPartLength

27.6”(700mm)999.999”MaxPartLength

27.6”(700mm)999.999”MaxPartLength

MaxMaterialWeightforShuttleIndex NA 4,410lbs(2000kg) 5,070lbs(2300kg) 8,820lbs(4000kg)

S330/SA330/SA1318/SA460

HORIZONTAL MITERINGS330/2HV • S330/3HV • SA330WPC • SA1318WPC • SA460WPC

W2543M • WS2543M • W2543A

Capacity W2543M W2543A WS2543M90° Round 28”(711mm) 28”(711mm) 28"(711mm)90° Nominal Rectanglar 27”Hx44”W(685.8x1117.6mm) 27”Hx44”W(685.8x1117.6mm) 27”Hx44”W(685.8x1117.6mm)45° Round N/A N/A 28"(711mm)45° Nominal Rectanglar N/A N/A 27’’x25.6”(685.8x650mm)60° Round N/A N/A 25.6”(650mm)60° Nominal Rectanglar N/A N/A 25.6”Hx15.75”W(650x400mm)

BladeSpeed 98-361FPM(30-110m/min.) 98-361FPM(30-110m/min.) 98-361FPM(30-110m/min.)

BladeSize 2”x28’6-1/2”x.063”(54x8700x1.6mm) 2”x28’6-1/2”x.063”(54x8700x1.6mm) 2”x28’6-1/2”x.063”(54x8700x1.6mm)BladeDrive 10H.P.(7.5kW) 10H.P.(7.5kW) 10H.P.(7.5kW)HydraulicPump 3HP(2.2kW) 3HP(2.2kW) 3H.P.(2.2kW)CoolantMotor 1/4 HP (180W) 1/4 HP (180W) 1/4HP,(180W)WireBrushMotor 1/12 HP (60W) 1/12 HP (60W) 1/12 HP (60W)RollMotor NA NA 1.5HP(1.1kW)TableRotation NA NA 1/2HP,(400W)ShuttleLength NA 59”(1500mm)999.999”MaxPartLength NAShuttleIndex NA 11,020lbs(5000kg) NAMachine Weight 9,500lbs(4300kg) 16,940(7700kg)grossweight 11,880lbs(5400kg)MachineFloorSpace 101”Hx179”Wx89.37”D

(2560Hx4550Wx2270mmD)108.26”Hx179”Wx89.37”D(2750Hx4550Wx2270mmD)

101”Hx179”Wx89.37”D(2560Hx4550Wx2270mmD)

TableHeight 32’ ~ 33’ (810 ~ 850 mm) withAdjustablePad 33’~34’(840~870mm)withAdjustablePad 32’ ~ 33’ (830 ~ 850 mm) withAdjustablePad

W2543M/W2543A/WS2543M

Before using this product, please read the operator's manual carefully and follow all applicable instructions. ●Whenusingourproducts,safetyequipmentisrequireddependingonheoperationaltask.

*Specifications,appearanceandequipmentaresubjecttochangewithoutnoticebyreasonofimprovement.*PleaseusethemachinemodelnameasS330/2HV,S330/3HV,SA330WPC,SA1318WPC,SA460WPC,W2543M,WS2543M,orW2543Awhenapplyingforadministrationapplications.*Foranyinquires,pleasecontactlocalAmadaMachineryAmerica,Inc.office.

© AMADA MACHINERY AMERICA, INC. AllRightsReserved.

www.amadamca.com

▲▲!

▌PRODUCT SPECIFICATIONS & DIMENSIONS

100SPuenteSt·Brea,CA92821Phone: 847.285.4800 · Fax:847.519.2127