Product Specification Manual - J-René Lafond inc. · November 2006 Page 1 - 2 Description of where...
Transcript of Product Specification Manual - J-René Lafond inc. · November 2006 Page 1 - 2 Description of where...
Product Specification Manual New Holland TB Series Specialty
TB120 High-Clearance TB110, TB120 Low-Profile
November 2006 Form number: ATA-10182-06
TB Series Specialty Product Specification Manual
Table of Contents
1 Introduction Page Tractor Intro 1-2 Product Identification Tags 3-4 Feature Highlights 4-5
2 Detailed Specifications Dimensions – Low-Profile 2 Dimensions – High-Clearance 3 Wheel Track Settings 4 Turning Radius 5 Transmission 6 Speed Charts 7-8 Differential Lock, FWD, Axles and Brakes 9 Hitch, Hydraulics, PTO 10 Engine 11
3 Loader and Attachments Available Implements and Attachments 2 Dimensional Charts 3 Loader Performance 4
TB Series Specialty Product Specification Manual
November 2006 Page 1 - 1
TB Series High-Clearance Overview
The TB120 High-Clearance lets you put 96 PTO HP into rows of tall vegetables or specialty crops without worry of crop damage. TB series tractors are noted for their simple to use controls and reliable performance. The TB120 High-Clearance (HC) is based off of the rugged and reliable New Holland TB series All Purpose tractor. Design changes have been done to increase the ground clearance to 29.5 inches at the front axle with 12.4R 46 tires (13.6R 38 tires are also available). The TB120 High-Clearance model includes a semi-straddle deck, open operator’s platform and four wheel drive (FWD). Standard features include:
• Reliable 4 & 6 cylinder engines • Semi-straddle operator’s platform with easy to reach controls • Rugged 8x2 synchro mesh
transmission • High capacity 3-pt. hitch • Flip up hood for easy servicing • Two deluxe rear remotes
Three reliable transmission choices are available to match your needs: standard 8F x 2R constant mesh, optional 16F x 4R and optional 12F x 3R with creeper range. Transmission controls are conveniently placed at the right side of the operator.
Model Engine / PTO HP Engine Displacement Aspiration TB120 High-Clearance 115 / 96 456 cu in (7.5L) 6 cyl. Natural
TB Series Specialty Product Specification Manual
September 2006 Page 1 - 2
TB Series Low-Profile Overview
The TB Series Low-Profile (LP) specialty tractor is available in two models; the TB110 LP, TB120 LP. These heavy duty tractors allow you to pull large implements and heavy loads with ease. TB series tractors are noted for their simple to use controls and reliable performance. The TB Series Specialty models are based off of the rugged and reliable New Holland TB Series All Purpose tractor. For the Low-Profile models the shift levers have been moved to the top of the transmission housing in the middle of the operator’s platform where they are protected won’t get snagged by branches. The wide coverage fenders are adjustable for different tire sizes and help protect fruit and tree branches from tire damage. On Low-Profile models the height to the top of the steering wheel is 72.5 inches. Low-Profile models include a straddle deck, open operator’s platform and a choice of either two or four wheel drive. Standard features include:
• Reliable 4 & 6 cylinder engines • Semi-straddle operator’s platform with easy to reach controls • Rugged 8x2 synchro mesh
transmission • High capacity 3-pt. hitch • Flip up hood for easy servicing • Two deluxe rear remotes
Three reliable transmission choices are available to match your needs: standard 8F x 2R constant mesh, optional 16F x 4R and optional 12F x 3R with creeper range.
Model Engine / PTO HP Engine Displacement Aspiration TB110 Low-Profile 108 / 90 304 cu in (5.0L) 4 cyl. Turbo TB120 Low-Profile 115 / 96 456 cu in (7.5L) 6 cyl. Natural
TB Series Specialty Product Specification Manual
November 2006 Page 1 - 2
Description of where the serial number tag, ROPS certification tag, engine emissions information and engine serial number are located on the tractor. Serial number locations are the same for Low-Profile and High-Clearance Models
The tractor serial number is stamped on the right side of the transmission housing, just in front of the operator’s platform.
A data plate giving ROPS information and identification is located on the right side of the ROPS structure on the inside.
A data plate giving engine and emissions information is located on the top of the engine valve cover
TB Series Specialty Product Specification Manual
November 2006 Page 1 - 3
Large displacement engines are time proven and feature a durable dry sleeve design for extended life. The TB110 LP uses a turbo charged 4-cyl engine. The 6-cyl engine used in the TB120 LP and HC is naturally aspirated. Operators will notice the s34-40% torque rise to get them throug
any tough spots. These engines are approved for use with B20 biodiesel blends (meeting ASTM 6751 Standards).
tout h
Transmission options are available to suit your customer’s applications. The rugged 8x2 constant mesh transmission is known for its economical price and reliability. Upgrade to the 16x4 Dual Command
TM and at the push of a button you get a clutchless hi/low shift in each gear. The dealer installed creeper option adds a creeper range to the 8x2 transmission, making it a 12x3 creeper transmission. It has 1 reverse and 4 forward creeper gears for slow speed applications.
The standard 3-point hitch capacity for TB series LP and HC tractors is an outstanding 3,600 lbs (ASAE @ 24 inches). Adding optional external cylinders increases the capacity to 5,400 lbs (w/one cylinder) and 7,200 lbs (w/two cylinders). The hitch is mechanically controlled with two levers, one for position control and one for draft control. Draft sensing is done at the lower links, providing precise draft control when needed. Flexible link ends are standard, making implement hookup quick and easy. Telescoping stabilizers are also standard.
Quick response hydraulics are provided by independent implement and steering pumps to give you maximum hydraulic performance. The standard implement pump provides 9.3 gpm for the rear remotes, 3-point hitch and loader. An optional auxiliary pump (8.5 gpm) increases the implement flow rate to 17.8 gpm. Two deluxe rear remotes are standard equipment and include flow controls and adjustable detents. The 3
rd and 4th rear remote valves are optional (requires auxiliary pump) and can be factory installed or added at the dealership. The remote control levers and coupler dust covers are color coded for assisting in implement hook up.
TB Series Specialty Product Specification Manual
November 2006 Page 1 - 4
Heavy duty steel fuel tank is located under the operator platform where it is easy to fill from the ground. The 37 gallon capacity allows the operator to work longer between fueling, increasing the tractor’s overall efficiency. Fuel tank does not interfere with visibility.
Fast and easy servicing. The TB features a one-piece, flip up hood with gas strut, allowing for fast and easy access to the battery, radiator and engine air filter. Engine oil level can be checked and topped off if necessary without raising the hood. The hydraulic oil level is easily checked from the rear of the tractor.
Step deck platform includes a rubber floor mat to reduce noise and vibration. The platform is sized for easy entry/exit from both sides. Steps and large grab handles are standard on both sides. Suspended brake and clutch pedals provide an uncluttered path to the seat and plenty of leg room. Take a seat in the comfort contoured seat and you can adjust your position and the steering wheel for maximum comfort.
Heavy duty front axles are available in 2WD or power enhancing FWD on the TB LP models and FWD only on the TB HC models. The 2WD axle utilizes the inverted U design used in other New Holland tractors. Double reduction axle shafts and large diameter bearings are used to increase the strength of the heavy duty FWD axle. The steering cylinders are tucked behind the axle where they are protected. Both axles offer excellent maneuverability and overall tractor stability.
Conveniently placed controls are within easy reach for the operator’s convenience. The transmission controls are located on the right side of the operator on the TB High-Clearance. On the TB Low-Profile, the transmission controls are located in the center of the transmission housing where they won’t get snagged by tree branches. Hydraulic controls are at the right side for both models. The PTO engagement lever is at the left side. An analog instrument cluster monitors 15 critical functions to keep you informed.
TB Series Specialty Product Specification Manual
November 2006 Page 2 - 1
TB Tractor Series Specifications
TB Series Specialty Product Specification Manual
November 2006 Page 2 - 2
TB Series Low-Profile 2WD and FWD Tractors
TB110 Low Profile
TB110 Low Profile
TB120 Low Profile
TB120 Low Profile
2WD FWD 2WD FWDA 90 (2286) 89.5 (2273) 99.5 (2527) 99 (2515)B 72.5 (1841) 72.5 (1841) 72.5 (1841) 72.5 (1841)C 63.5 (1613) 63.5 (1613) 66 (1676) 65 (1651)D 98 (2489) 98 (2489) 97.5 (2476) 98 (2489)
78.5 (1994) 78.5 (1994) 78.5 (1994) 78.5 (1994)E 131.5 (3340) 136 (3454) 147 (3734) 145.5 (3696)
F60 to 80
(1524 to 2032)64 to 80
(1626 to 2032)60 to 80
(1524 to 2032)64 to 80
(1626 to 2032)G 11.2(292) 11.5 (292) 11.2(292) 11.5 (292)
9.5x15 9.5x24 9.5x15 9.5x2416.9x24 16.9x24 16.9x24 16.9x24
Tire size: FrontTire size: Rear
Ground clearance: Rear axle centerlineTrack setting
Overall length (to lower link ends)Height to top of ROPS: Folded
Height over hood Height to top of steering wheelWheelbase
TB110/TB120 Low-Profile General Overall Dimensions
Dimensions: in (mm)
Height to top of ROPS
Tractor weight - Unballasted
TB110 LP TB120 LP 2WD 7103 (3222 kg) 7544 (3422 kg)
FWD 7848 (3560 kg) 8252 (3743 kg)
TB Series Specialty Product Specification Manual
November 2006 Page 2 - 3
TB Series High-Clearance FWD Tractors
TB120 High ClearFWD
A 116 (2946)96 (2438)
B 99 (2515)C 174.5 (4432)D 29.5 (750)E 72 to 88 (1829 to 2235)F Tread adjustment: Rear 72 to 88 (1829 to 2235)
181 (4597)12.4R46
TB120 High-Clearance General Overall Dimensions
Turning radius w/o brakes Tire Size
Ground clearance: Front axleTread adjustment: Front
Height to top of ROPS
Overall length (to lower link ends)
Dimensions: in (mm)
WheelbaseHeight to top of ROPS - Folded
Tractor weight - Unballasted TB120 HC
8,929 lbs (4050 kg)
TB Series Specialty Product Specification Manual
November 2006 Page 2 - 4
Overall Width
Tires Overall Width Model 2WD
Front Rear
MFD Front Rear
min / max in. (mm)
TB110 LP TB120 LP
27 x 9.5-15, 8PR 16.9 x 24, 6PR (R1)
9.5-24, 6PR (R1) 16.9 x 24, 6PR (R1)
73 / 97 (1854 / 2464)
TB120 HC NA 13.6x 38, 6PR (R2) 13.6x 38, 6PR (R2)
84.0 / 96.0 (2133 / 4238)
TB120 HC NA 12.4R x 46 (R2) 12.4R x 46 (R2)
82.4 / 96.0 (2092 / 4238)
Overall width is the approximate distance between the outsides of the rear tires at ground level.
Low-Profile - 2WD Wheel Front Axle Track Width Wheel Track (in.)
Model A B C D E F G TB110 LP TB120 LP
52 (1321)
56 (1422)
60 (1524)
64 (1626)
68 (1727)
72 (1829)
76 (1930)
Low-Profile - FWD Wheel Front Axle Track Width
Wheel Track (in.) Model A B C D E F G H
TB110 LP TB120 LP
59 (1500)
63 (1600)
67 (1700)
71 (1800)
75 (1900)
79 (2000)
83 (2100)
87 (2200)
Low-Profile - Rear Wheel Track Width
Wheel Track (in.) Model A B C D E F G
TB110 LP TB120 LP
56 (1422)
60 (1524)
64 (1626)
68 (1727)
72 (1829)
76 (1930)
80 (2032)
High-Clearance - Wheel Track Width (Front and rear)
Wheel Track (in.) Model A B C D E
TB120 HC 72 (1820) 76 (1923) 80 (2023) 84 (2121) 88 (2235) Track width is the approximate distance between the center of each tire at ground level.
TB Series Specialty Product Specification Manual
November 2006 Page 2 - 5
Turning Performance
Turn Radius: The radius of the circle defined by the outside rear edge of the outside front wheel
TB110 LP TB120 LP TB120 HC 2WD in. (mm) in. (mm) in. (mm) Radius w/ brakes 146 (3700) 146 (3700) NA Radius w/o brakes 162 (4110) 162 (4110) NA FWD (disengaged) Radius w/ brakes 154 (3910) 154 (3910) DNA Radius w/o brakes 169 (4290) 169 (4290) 209 FWD (engaged) Radius w/ brakes 162 (4110) 162 (4110) DNA Radius w/o brakes 187 (4750) 187 (4750) DNA
NA – Not applicable DNA – Data not available
TB Series Specialty Product Specification Manual
November 2006 Page 2 - 6
Transmission Specifications 8x2 Constant Mesh
12x3 Constant Mesh with Creeper range
16x4 Dual CommandTM
Type
4 forward and 1 reverse constant mesh
gears, 2 ranges
4 forward and 1 reverse constant mesh
gears, 3 ranges
(1 creeper range)
4 forward and 1 reverse constant mesh
gears, 2 ranges, clutchless
hi/lo shift in each gear
Operation Mechanical Mechanical Mechanical
Speeds 8F x 2R 12F x 3R 16F x 4R
Clutch
Size 14-inch diameter 14-inch diameter 14-inch diameter
Type Dry Dry Dry Material Cerametallic Cerametallic Cerametallic Gears in 2 to 8 mph range
High-Clearance – 3 Low-Profile - 4
High-Clearance – 3 Low-Profile - 4
High-Clearance – 6 Low-Profile - 8
Gears <1mph* None 4 None
Max Speed* High- Clearance 18.27 MPH (29.39 kph) 18.27 MPH (29.39 kph) 18.27 MPH (29.39 kph) Low-Profile 15.27 mph (24.57 kph) 15.27 mph (24.57 kph) 15.27 mph (24.57 kph)
*Low-Profile model measured on 16.9x24 R1 tires *High-Clearance model measured on 13.6x38 R1 tires
TB Series Specialty Product Specification Manual
November 2006 Page 2 - 7
Speed Charts 8x2 Transmission (12x3 if equipped with opt. creeper range)
Rear Tires Tractor Model
TB110 LP TB120 LP TB120 High-Clearance
Tire Size 16.9x24 13.6-38 12.4-46 Tire
Rolling Radius
In (mm) 25 (635.0)
Range Gear MPH (kph) 1 1.43 (2.30) 1.71 (2.75) 1.92 (3.08) 2 1.79 (2.88) 1.66 (2.67) 1.86 (2.99) 3 3.12 (5.02) 1.14 (3.44) 2.39 (3.85) 4 4.29 (6.90) 3.73 (6.00) 4.18 (6.72)
LO R 2.09 (3.36) 2.5 (4.02) 2.80 (4.51) 1 5.13 (8.26) 6.14 (9.97) 6.87 (11.05) 2 6.40 (10.3) 7.66 (12.33) 8.58 (13.80) 3 11.22 (18.06) 13.43 (21.60) 15.03 (24.18) 4 15.27 (24.57) 18.27(29.39) 20.45 (32.90)
HI R 7.38 (11.88) 8.83 (14.20) 8.94 (14.38) 1 0.14 (0.23) 0.13 (0.21) 0.15 (0.24) 2 0.18 (0.29) 0.17 (0.27) 0.19 (0.30) 3 0.31 (0.50) 0.29 (0.47) 0.33 (0.52) 4 0.43 (0.69) 0.40 (0.64) 0.45 (0.72)
Creeper
If equipped R 0.21 (0.34) 0.19 (0.31) 0.21 (0.34)
Engine at 2100 ERPM
TB Series Specialty Product Specification Manual
November 2006 Page 2 - 8
Speed Charts 16x4 Dual PowerTM Transmission
Tractor Model
TB110 LP TB120 LP TB120 High-Clearance
Rear Tires
Tire Size
16.9x24 with ratio axle
23.79 13.6-38 12.4-46 Tire
Rolling Radius
In (mm) 25 (635.0)
Range
Gear – hi/low push
button MPH (kph) 1-L 1.11 (1.79) 1.33 (2.14) 1.49 (2.40) 1-H 1.43 (2.30) 1.71 (2.75) 1.92 (3.08) 2-L 1.39 (2.24) 1.66 (2.67) 1.86 (2.99) 2-H 1.79 (2.88) 1.14 (3.44) 2.39 (3.85) 3-L 2.43 (3.91) 2.90 (4.67) 3.25 (5.23) 3-H 3.12 (5.02) 3.73 (6.00) 4.18 (6.72) 4-L 3.34 (5.38) 3.99 (6.42) 4.46 (7.18) 4-H 4.29 (6.90) 5.13(8.26) 5.75 (9.25) R-L 1.63 (2.62) 1.91 (3.08) 1.14 (3.45)
LO
R-H 2.09 (3.36) 2.5 (4.02) 2.80 (4.51) 1-L 3.99 (6.42) 4.77 (7.68) 5.34 (8.60) 1-H 5.13 (8.26) 6.14 (9.97) 6.87 (11.05) 2-L 4.98 (8.01) 9.61 (5.97) 6.69 (10.76) 2-H 6.40 (10.30) 7.66 (12.33) 8.58 (13.80) 3-L 8.73 (14.05) 10.40 (16.74) 11.65 (18.74) 3-H 11.22 (18.06) 13.43 (21.60) 15.03 (24.18) 4-L 11.88 (19.12) 14.28 (22.98) 15.99 (25.72) 4-H 15.27 (24.57) 18.27(29.39) 20.45 (32.90) R-L 5.74 (9.24) 6.86 (11.04) 6.95 (11.18)
HI
R-H 7.38 (11.88) 8.83 (14.20) 8.94 (14.38) Engine at 2100 ERPM
TB Series Specialty Product Specification Manual
November 2006 Page 2 - 9
Differential Lock and FWD Engagement
Rear Differential Front Differential
(if equipped with FWD)
FWD
TB100, TB110, TB120 Mechanical Limited Slip Mechanical
Axles and Brakes
lb (kg) TB100 TB110 TB120 Maximum Rear Axle Capacity
11,000 (4990) 12,011 (5448) 12,011 (5448)
2WD Maximum Front Axle Capacity
5,000 (2268) 5,000 (2268) 5,000 (2268)
FWD Maximum Front Axle Capacity
6,314 (2864) 6,314 (2864) 7,165 (3250)
Brakes 7.40 in (188 mm)
dia. 3 discs per side. 7.40 in (188 mm)
dia. 4 discs per side 7.40 in (188 mm)
dia. 4 discs per side
Brake actuation Mechanical Mechanical Mechanical
Parking Brake Dependent, hand
controlled Dependent, hand
controlled Dependent, hand
controlled Front Axle Oscillation
12° 12° 12°
Turn Angle 55° 55° 55°
TB Series Specialty Product Specification Manual
November 2006 Page 2 - 10
Hitch, Hydraulics, and PTO Performance TB100, TB110, TB120 3 Pt. Hitch
Category II Draft Control / Sensing Mechanical / Top Link
Link Ends Rigid (optional flexible) Telescoping stabilizers Standard Max Lift Capacity (ASAE, 24 in from balls)
Standard - 3,600 lbs. (1633 kg) w/ 1 Optional external cylinder - 5,400 lbs. (2449 kg) w/ 2 Optional external cylinder - 7,200 lbs. (3266 kg)
Hydraulics
Pump Type Open Center, Gear
System Pressure 2,600 psi
Implement Pump
Standard – 9.3 gal/min (35.2 l/min) Optional auxiliary pump – 8.5 gal/min (32.17 l/min)
Total flow w/ opt aux pump 17.8 gal/min (67.4 l/min) Standard Rear Remotes
2 deluxe remotes with flow controls, adjustable detents and four (4) couplers
Optional Rear Remotes 3rd and 4th (factory or dealer installed) Loader Control valve / Joystick Standard with loader
Steering Pump 9.2 gal/min (34.8 l/min) Number of Steering Cylinders 1
PTO
Type Fully Independent
Speed 540/1000 RPM
Operator Control Mechanical
Clutch Multi-Plate wet clutch
Engine Speed 1,900 ERPM at 540 PTO RPM and 2,060 at 1000 PTO RPM
Shaft Size 1 3/8 inch, 6 spline (540 RPM)
Optional: 1 3/8 inch, 21 spline (1000 RPM)
TB Series Specialty Product Specification Manual
November 2006 Page 2 - 11
Engine Performance TB110 LP TB120 LP TB120 HC Engine
Make New Holland
Cylinders / Aspiration 4 / Turbo 6 / Natural 6 / Natural B20 Biodiesel (meeting ASTM 6751 standards) or standard
diesel fuels Fuel Type
Displacement 304 cu in (5.0 L) 459 cu in (7.5 L) 459 cu in (7.5 L)
Block Type Structural, Dry Liner
Rated Speed (RPM) 2100
Gross Engine Power (hp) 98 115 115
PTO Power (hp) 80 96 96 Max Torque (Ft-lb @ 1200 rpm) 249 358 358
Emission Legislation Tier II
Cooling System
Type Water 13.7 quarts 16.9 quarts
(13.0 L) (16.0 L) Coolant Capacity
Fan Type 7 blades / 17.4 inches (443 mm)
Drive Fixed Fuel, Air, and Oil System
Injection Pump Lucas / DPS / Rotary
Injector Type Direct
Fuel Filter Type Cartridge filter in fuel line w/water separator
Fuel Capacity 37 gal (140 L)
Air Filter Type Dry / Dual Element
Oil Filter Service 300 hours
Oil Capacity 12.0 quarts (11.4 L)
Muffler Under Hood
Exhaust Outlet Standard - Vertical (left side of hood), Optional - Horizontal
Electrical 12 Battery (volts)
Battery (cca) 800
Alternator (Amps) 55
Cold Start Aid Thermostart
TB Series Specialty Product Specification Manual
November 2006 Page 3 - 1
TB series All Purpose tractor shown with 46LB Loader
TB Series Tractors
Implements and Attachments
46LB Front Loader Specifications (Not for use on TB High-Clearance tractors)
TB Series Specialty Product Specification Manual
November 2006 Page 3 - 2
Available Implements and Attachments
Bucket options allow the customer to choose the best bucket for their particular application and operation.
“Pin on” buckets 3 3 • 84” heavy duty bucket, 0.63 yd heaped) capacity (0.78 yd
3 3 • 96” heavy duty bucket, 1.3 yd heaped) capacity (1.58 yd“Quick Attach” buckets
3 3 • 72” heavy duty bucket, 0.55 yd (0.68 yd heaped) capacity 3 3 • 72” standard duty bucket, 0.58 yd (0.72 yd heaped) capacity
3 3 • 84” heavy duty bucket, 0.63 yd (0.78 yd heaped) capacity 3 3 • 84” light material bucket 0.92 yd (1.18 yd heaped) capacity
Ballast Box for added rear end weight for loader applications.
Bolt on cutting edge helps increase the life of the bucket. Available on all buckets offered with the 46LB Loader. A bolt on tooth bar is also available.
Pallet forks – 48 in, adds versatility to a 46LB loader (quick attach skid steer style mounting bracket).
Grill Guard protects the front grill from damage caused by branches, etc.
rdGrapple fork for 72”, 84” and 96” buckets (requires 3 function rear remote hose kit.).
Bale Spear adds to versatility to the loader for moving and feeding round bales (quick attach skid steer style mounting bracket).
TB Series Specialty Product Specification Manual
November 2006 Page 3 - 4
46LB Non Self-Level Loader Performance (Not for use on TB High-Clearance tractors) Cycle Times Tractor Model (sec) TB110 Low-Profile TB120 Low-Profile Raise 5.3 5.3
Lower 3.7 3.7
Dump 4.7 4.7
Rollback 3.3 3.3
Total 17.0 17.0 Loader Capacity - measured per ASAE S301.3
TB110 Low-Profile TB120 Low-Profile Lift capacity @ max height @ 800 mm 3,150 lb (1429 kg) 3,150 lb (1429 kg)
Breakout force @ 800 mm 4,230 lb (1919 kg) 4,230 lb (1919 kg)
Max lift height (A) 136 in (3454 mm) 137 in (3480 mm) Max lift height under level bucket (B) 129 in (3277 mm) 130 in (3302 mm) Clearance w/ bucket dumped (C) 105 in (2667 mm) 106 in (2692 mm) Reach at max lift height (D) 34.5 in (876 mm) 34.5 in (876 mm)
Bucket dump angle (E) 55 degrees 55 degrees
Reach w/ bucket down (F) 86 in (2184 mm) 87 in (2210 mm)
Bucket rollback angle (G) 37 degrees 36 degrees
Digging depth (H) 4 in (102 mm) 3 in (102 mm) NOTE: Loader specifications may vary based on tractor model, hydraulic system, tire size, etc.
TB Series Specialty Product Specification Manual
November 2006 Page 3 - 5
The information presented herein is intended for sales education purposes and is intended for the use of CNH America LLC, its affiliates, and its independent dealers only. This information is to be treated as CONFIDENTIAL and is not to be used for advertising purposes. Competitive comparisons are based on competitive information known at time of printing. Sources of information include published industry specifications and data. General statements made herein are the opinions of the authors concluded from supporting data. Note: Specifications are stated in accordance with industry standards or recommended practices, where applicable. This Sales Education Document has been published for worldwide circulation. The availability of some models and equipment builds varies according to the country in which the equipment is used and sold. The illustrations and text may include optional equipment and accessories and may not include all standard equipment. For more information about the current standard and optional equipment offered for your sales area, consult the CNH America LLC published price listings. Important CNH America LLC reserves the right to change product specifications without notice and without incurring any obligation relating to such changes. Any trademarks referred to herein in association with the goods and/or services of companies other than CNH America LLC are the property of these respective companies. New Holland is a registered trademark of CNH America LLC.