Product Spec Guide - Royal Building Products 42.22 56.3 LENGTH(S) 12' 16' PCS/BDL 4 LBS/BDL 32.9...

2017Product Spec Guide

Trim and Moulding

2 royalbuildingproducts.com 800.368.3117 3

Table of Contents

S4S Conceal Trim™ System ................................................... 4

S4S Trimboard ........................................................................ 7

Royal Trimboards (6/4)...........................................................8

Royal SurEdge ........................................................................ 9

Trimboard Sheet Stock ........................................................10

Siding & Trim Accessories ...................................................11

Window & Door Trim Systems .............................................12

Garage Door Trim Systems ..................................................17

Decorative Mouldings ..........................................................19

Moulding Components.........................................................21

Installation Tips ....................................................................24

Frequently Asked Questions................................................26

Product Cross Reference .....................................................28

Notes .....................................................................................30

Facts are facts and details are details.

Royal® Building Products offers

a seriously complete line of 100%

cellular PVC trim, moulding and siding

accessories. Which means you can

always rely on us for everything

from show-stealing window and

door surrounds to dormer and garage

door fascia. When it comes

to building homes that make

statements: Everything is important.


CONCEAL SKIRT BOARD

9706 Standard Trim

7994 Standard Trim

CONCEAL STANDARD TRIM (Now with 1" Pockets)

1"3 1/2"

1"5 1/2"

Royal® S4S Conceal Trim™ System Royal® S4S Conceal Trim™ System

CONCEAL BEADED PLANKING

7993 Skirt Board

1"5 1/2"

LENGTH(S) 18' 18'PCS/UNIT 24 48LBS/UNIT 556.16 1112.16

9701 Skirt Board

1"

7 1/4"




9707 Standard Trim

1"7 1/4"


9794 New Construction Surround


1"

1"

3 1/2"

3 1/2"

LENGTH(S) 18'PCS/UNIT 2LBS/UNIT 48




1"

1"

5 1/2"

5 1/2"



9734 Beaded Planking

5 3/4"

1/2"

LENGTH(S) 16' 18'PCS/BDL 4 4LBS/BDL 43.88 49.36

9735 High Heat Beaded Planking

LENGTH(S) 16' 18'PCS/BDL 4 4LBS/ BDL 43.88 49.365 3/4"

1/2"

9796 Conceal 1" Water Table

1 5/8"

2 9/16"

LENGTH(S) 16'PCS/BDL 4LBS/BDL 32

800.368.3117 7

Royal® S4S Conceal Trim™ System

CONCEAL CORNER BOARD

7973 S4S Corner Board – Traditional Square

7970 S4S Corner Board – Rabbeted Corner (Now with 1" Pockets)

7972 S4S Corner Board – Rabbeted Corner (Now with 1" Pockets)

7971 S4S Corner Board – Traditional Square

Royal® S4S Trimboard

5 11/16"

5 11/16"

5 11/16"

5 11/16"

3 11/16"

3 11/16"

3 11/16"

3 11/16"

6 royalbuildingproducts.com

AVAILABLE SIZES

NOMINAL WIDTH

ACTUAL DIMENSIONS

PROFILE NUMBER

PIECES PER UNIT

ACTUAL LENGTH

5/8 THICKNESS5/8" x 4" 5/8" x 3 1/2" 7827 130 18'5/8" x 6" 5/8" x 5 1/2" 7828 80 18'5/8" x 8" 5/8" x 7 1/4" 7829 60 18'5/8" x 10" 5/8" x 9 1/4" 7830 50 18'5/8" x 12" 5/8" x 11 1/4" 7831 40 18'4/4 THICKNESS1" x 2" 3/4" x 1 1/2" 7832 270 18'1" x 3" 3/4" x 2 1/2" 7833 162 18'1" x 4" 3/4" x 3 1/2" 7834 117 18'1" x 5" 3/4" x 4 1/2" 7871 90 18'1" x 6" 3/4" x 5 1/2" 7835 72 18'1" x 8" 3/4" x 7 1/4" 7836 54 18'1" x 10" 3/4" x 9 1/4" 7837 45 18'1" x 12" 3/4" x 11 1/4" 7838 36 18'5/4 THICKNESS5/4" x 3" 1" x 2 1/2" 7874 133 18', 20'5/4" x 4" 1" x 3 1/2" 7840 91 18', 20'5/4" x 5" 1" x 4 1/2" 7875 70 18', 20'5/4" x 6" 1" x 5 1/2" 7841 56 18', 20'5/4" x 8" 1" x 7 1/4" 7842 42 18', 20'5/4" x 10" 1" x 9 1/4" 7843 35 18', 20'5/4" x 12" 1" x 11 1/4" 7844 28 18', 20'

1"3/4"5/8"

Royal S4S Trimboard is reversible and available in a smooth/smooth or smooth/woodgrain finish.

CONCEAL DECORATIVE TRIM


LENGTH(S) 20'PCS/UNIT 16LBS/UNIT 889.49



7960 One Piece Crown

3 1/2"

2 3/4"

LENGTH(S) 12'PCS/BDL 4LBS/BDL 43.62

9796 Conceal 1" Water Table

1 5/8"

2 9/16"


9760 Conceal Gable Trim

1 5/8"

2 9/16"



Royal SurEdge™

AVAILABLE SIZES

NOMINAL WIDTH

ACTUAL DIMENSIONS

PROFILE ACTUAL LENGTH

5/8 THICKNESS TRIM BOARDS

4" 5/8" x 3 1/2" 9759 12', 18'

6" 5/8" x 5 1/2" 9760 12', 18'

8" 5/8" x 7 1/4" 9761 12', 18'

10" 5/8" x 9 1/4" 9762 12', 18'

12" 5/8" x 11 1/4" 9763 12', 18'

14" 5/8"x 13 1/4" 9784 12', 18'

16" 5/8" x 15 1/4" 9764 12', 18'


3" 3/4" x 2 1/2" 9766 12', 18'

4" 3/4" x 3 1/2" 9767 12', 18'

5" 3/4" x 4 1/2" 9768 12', 18'

6" 3/4" x 5 1/2" 9769 12', 18'

8" 3/4" x 7 1/4" 9770 12', 18'

10" 3/4" x 9 1/4" 9771 12', 18'

12" 3/4" x 11 1/4" 9772 12', 18'

14" 3/4" x 13 1/4" 9788 12', 18'

16" 3/4" x 15 1/4" 9773 12', 18'


3" 1" x 2 1/2" 9774 12', 18', 20'

4" 1" x 3 1/2" 9775 12', 18', 20'

5" 1" x 4 1/2" 9776 12', 18', 20'

6" 1" x 5 1/2" 9777 12', 18', 20'

8" 1" x 7 1/4" 9778 12', 18', 20'

10" 1" x 9 1/4" 9779 12', 18', 20'

12" 1" x 11 1/4" 9780 12', 18', 20'

16" 1" x 15 1/4" 9781 12', 18', 20'

Royal® Trimboard

AVAILABLE SIZES

NOMINAL WIDTH

ACTUAL DIMENSIONS

PROFILE NUMBER

PIECES PER UNIT

ACTUAL LENGTH

6/4 THICKNESS6/4" x 4" 1 1/4" x 3 1/2" 9747 65 18' 20'6/4" x 6" 1 1/4" x 5 1/2" 9748 40 18' 20'6/4" x 8" 1 1/4" x 7 1/4" 9749 30 18' 20'6/4" x 10" 1 1/4" x 9 1/4" 9750 25 18' 20'6/4" x 12" 1 1/4" x 11 1/4" 9751 20 18' 20'6/4" x 16" 1 1/4" x 15 1/4" 9799 18, 15 18' 20'

1 1/4"

Royal® SurEdge Trimboards are now offered with protective film and in Tough Pack.


Royal® Siding & Trim Accessories

2449 Starter Strip/Drip Cap

7836 1x8 S4S Trimboard

7838 1x12 S4S Trimboard

2542 Inside Corner

2536 Inside Corner

SIDING STARTER STRIP COMPONENTS

BALUSTER/INSIDE CORNER COMPONENTS

1 1/2"1 1/2"

1 1/4"1 1/4"

11 1/4"

3/4"

7 1/4"

3/4"

1 5/8"

11/16"




LENGTH(S) 8' 10' 12'PCS/BDL 10 10 6LBS/BDL 50.79 63.49 45.71


Royal® Trimboard Sheet Stock

AVAILABLE SIZES

NOMINAL WIDTH

ACTUAL DIMENSIONS

PROFILE NUMBER

PIECES PER UNIT

ACTUAL LENGTH

3/8 THICKNESS3/8" x 4' 3/8" x 48" 2878 32 8', 10', 12', 18', 20'1/2 THICKNESS1/2" x 4' 1/2" x 48" 2871 24 8', 10', 12', 18', 20'5/8 THICKNESS5/8" x 4' 5/8" x 48" 2838 19 8', 10', 12', 18', 20'4/4 THICKNESS1" x 4' 3/4" x 48" 2837 16 8', 10', 12', 18', 20'5/4 THICKNESS5/4" x 4' 1" x 48" 2864 12 8', 10', 12', 18', 20'11/4 THICKNESS1-1/4" x 4' 1-1/4" x 48" 9752 12 8', 10', 12', 18', 20'


Royal® Window & Door Trim Systems Royal® Window & Door Trim Systems

DOOR FRAME COMPONENTS

7241 Door Frame Jamb Kit

7181 Door Frame Jamb

7372 Jamb Extender

DOOR FRAME CERTIFICATIONS

6 9/16"

1 1/4"

4 9/16"

1 1/4"

3"

5/8"

LENGTH(S) KitPCS/BDL KitLBS/BDL 34.99

LENGTH(S) 7' KitPCS/BDL 2 KitLBS/BDL 17.9 21.74


BRICK MOULD COMPONENTS

7526 Brick Mould WM180

2448 Brick Mould

7371 Brick Mould RM180

7351 J-Channel Brick Mould

7252 Florida Brick Mould

2341 Brick Mould Bendable

2"

1 1/4"

2"

1 1/4"

3"

1 1/4"

3"

1 1/4"

1 5/8"

11/16"

2"

1 1/4"








Royal® Window & Door Trim Systems Royal® Window & Door Trim Systems

2342 Casing

2343 Colonial Casing

2355 Colonial Casing

2746 Casing

7152 Backband

7710 Backband

CASING COMPONENTS

1 13/32"

1 11/32"

1 9/16"

1 3/8"

2 1/4"

11/16"

3 1/4"

11/16"

2 1/4"

11/16"

3 1/2"

5/8"







7216 Williamsburg Casing

2852 Casing

7467 J-Channel Casing

7651 J-Channel Casing

2590 Backband Casing

2369 RB3 Casing

CASING COMPONENTS

3 1/4"

1 7/32"

3 1/2"

1"

4 1/2"

1 1/8"

6 1/2"

1 1/8"

4 1/2"

1 3/16"

3 1/2"

1"








Royal® Garage Door Trim Systems

2448 Brick Mould

2497 Jamb

READY-TO-INSTALL SYSTEM COMPONENTS

2"

1 1/4"

5 13/16"

11/16"



2149 Garage Door Stop

2"

7/16"


2591 Architectural Uniflex Thermostop

31/4"

7/16"


3029 Retro Uniflex Thermostop

2 5/8"

7/16"


Royal® Window & Door Trim Systems

7117 Window Sill

7640 Sill Nose

7631 Sill Nose

7118 Sill Nose

SILL COMPONENTS

5 1/4"

1 1/4"

2 3/4"

2 1/4"

1 3/4"

2"

1 3/8"

1 5/16"





7435 Sill Nose

7717 Sill Nose

2345 Sill Nose

2 13/16"

1 3/4"

2"

1 3/16"

1 5/8"

1 1/2"





Royal® Decorative Mouldings

7158 Rams Crown

7662 Crown

7661 Crown

2592 Crown WM47

7541 Crown WM48

7491 Crown WM45

CROWN, BED AND COVE

2"

1 13/32"

8"

1"

6"

11/16"

4 5/8"

11/16"

4 1/4"

11/16"

5 1/4"

9/16"







Royal® Garage Door Trim Systems

2791 Drip Cap

2449 Drip Cap

2709 Flat Utility Trim – Smooth

2709 Flat Utility Trim – Embossed

OTHER SYSTEM COMPONENTS

5 13/16"

5/16"

5 13/16"

5/16"

1 5/8"

11/16"

2"

11/16"LENGTH(S) 16'PCS/BDL 12LBS/BDL 41.96





Royal® Moulding Components

7714 Shingle/Panel Mould

7901 Shingle/Panel Mould

7202 Shingle Mould WM287

2599 Shingle Mould WM210

SHINGLE/PANEL MOULD COMPONENTS

2"

2 7/8"

1 23/32"

21/32"

2"

1"

1 5/8"

11/16"





TRIM COMPONENTS

STOPS, QUARTER ROUND, BASE CAP COMPONENTS

9732 Finish Trim

1 3/4"

1 7/64"LENGTH(S) 12'PCS/BDL 10LBS/BDL 38.4

9789 8-7/16 Wide/Column Base

8 7/16"

11/16"

LENGTH(S) 8' 12' 16'PCS/BDL 2 2 2LBS/BDL 18 27 36

Royal® Decorative Mouldings

2435 Crown WM49

2853 Crown WM53

7712 Bed Mould

2598 Bed Mould WM75

2021 Scotia/Cove WM93

3 5/8"

9/16"

2 3/4"

9/16"

1 7/8"

1 1/2"

1 9/16"

9/16"

3/4"

3/4"LENGTH(S) 8' 12' 16'PCS/BDL 25 20 25LBS/BDL 13.73 16.47 27.45





CROWN, BED AND COVE

22 royalbuildingproducts.com


2046 Base Shoe WM126

7527 Base WM623

2330 Square

2536 Square

2542 Square

7719 Corner WM205

2018 Lattice

BASE, BASE SHOE, SQUARE, CORNER, LATTICE

3/4"

5/16"

3 1/4"

9/16"

5/8"

5/8"

1 1/4"

1 1/4"

1 1/2"

1 1/2"

1 1/8"

1 1/8"

1 35/64"

1/4"










2689 Quarter Round WM105

3/4"

3/4"

2450 Base Cap WM164

1 1/8"

11/16"


7788 Colonial Stop

1 1/4"

3/8"LENGTH(S) 12'PCS/BDL 20LBS/BDL 22.06

2759 Stop

1"

1/2"


2150 Stop

1 1/2"

5/8"


2258 Quarter Round (Glass Bead)

13/32"

1/2"


2024 Quarter Round WM108

1/2"

1/2"


800.368.3117 2322 royalbuildingproducts.com


Installation Tips Installation Tips

PAINTING

• Royal Trim & Mouldings require no painting for protection, but can be painted with 100% acrylic latex paint to achieve custom colors. (Scuff sanding will optimize paint adhesion, but is not required. A second coat may be needed to achieve desired color.)

• To maintain warranty for custom colors in darker shades, use heat-reflective paint with VinylSafe™ Technology from Sherwin-Williams. (Dark colors are considered any color that falls within the lightness (L) value of 56 to 0, with 100 being white and 0 being black.) NOTE: We do not recommend painting the flex of Garage Door Stop. TOUCH-UP FOR EXTERIOR MOULDINGS

• Dap® “All Purpose” Painter’s Putty®

• Minwax High Performance Wood Filler®

• Elmer’s Fill-N-Finish Light Wood Filler®

• Sherwin-Williams Shrink Free Spackling®

After installation is complete, caulk and/or putty all gaps and nail holes.

CLEANING

• Royal Trim & Mouldings can be cleaned using any of the recommended household cleaners listed below; however, glass cleaner has been shown to be best at keeping the finish intact.

• Recommended cleaners: See list in FAQs.

• Apply the cleaning solution and immediately wipe dry for best results.

• Avoid harsh cleaners with glycol ethers, ethanol type solvents and/or isopropyl alcohol as they can soften the PVC finish if left on for several minutes.

SAWING/CUTTING

• Use standard woodworking equipment for most applications.

• If using a power miter saw, a carbide-toothed blade with 80 teeth or more is recommended.

NAILING

• Use 6d and 8d galvanized nails.

• Place nails 12" on center, approximately 3/4" from each edge.

• Pre-drilling is required at temperatures of 40˚F or below.

• Royal Moulding can also be installed using a pneumatic nailer, with stainless steel or painted head screws or with construction-grade adhesives.

Fastening Trimboard• Use fasteners designed for wood trim and wood siding (thinner shank, blunt

head, full round head) with trimboard. Use only fasteners intended for exterior use, such as stainless steel or hot-dipped galvanized.

• DO NOT USE staples, small brads and wire nails. The fasteners should be long enough to penetrate the solid wood substrate a minimum of 1 1/2".

• Use two fasteners per every framing member for trimboard applications. Trimboards 12" or wider, as well as sheets, will require additional fasteners. Fasteners must be installed no more than 2" from the end of each board.

• Trimboards should be fastened into a flat, solid substrate. Fastening trimboards into hollow or uneven areas must be avoided. Unless product is installed in lower temperatures (< 40°F) pre-drilling is typically not required. Thinner trim products (3/8" and 1/2") are not intended to be ripped into trim pieces. They are to be glued to a substrate and mechanically fastened.

GLUING

• Temperature variations will cause PVC mouldings to expand and contract. To prevent open miter joints, we highly recommend gluing all joints on PVC mouldings using a quality instant glue or PVC cement.

• When assembling, splice and return miters by gluing the mouldings together before installation. This will allow you to fit the joints easily and fasten the trim to the wall as one unit.

• Always test adhesive brands before using.


No priming is necessary, however the finish quality is greatly enhanced if you use a premium 100% acrylic latex paint for trim with a built in primer. In addition, a primer may be required under the paint manufacturer’s warranty.

Always follow the paint manufacturer’s instructions. In preparation for painting, we recommend product should be clean, dry and free of dirt, grease and or any other surface contaminants before painting. Adhesion can be improved, and product should be cleaned with a mild detergent or denatured alcohol and soft clean rag or bristle brush.

Failure to adhere to manufacturer’s recommended guidelines for application of painted surfaces may void any paint manufacturer’s warranty.

Can you stain PVC mouldings? Yes, but staining PVC mouldings takes a specialized base coat AWP SPQT Stainable Primer Wood Base Coat for Hard Surfaces. Follow the manufacturer’s recommendations. Note that specialty applications such as this are not covered by our warranty.

Can PVC be used as a structural component such as framing? PVC cannot be used as a structural product in load bearing applications. PVC boards must always be supported by wood or other structural materials.

Installation questions? Please refer to our contractor handbook for all related installation questions available on our website.

• Fastening, cutting, routing our trim and mouldings

• Managing expansion and contraction

• Heat bending

• Storage and handling

• And other useful tips.

FAQs FAQs

How do I clean and remove scratches? If the scratches are not too deep, you can use Windex and Mr. Clean MAGIC ERASER, (or Scotch-Brite® Non-Scratch Scrub Sponge). Apply the cleaner. Use the eraser or sponge, and rub in circular and up and down motions, until scratches are buffed out. This takes some time, depending on the severity of the scratches. You can also use Turtle Wax® Rubbing Compound to remove surface scratches. Clean the product after buffing the out the scratches.

There are many cleaners on the market that will work for cleaning PVC:

• Windex® 409 Glass and Surface Cleaner® Spic & Span Cinch®

• Fantastik All-Purpose®

• Fantastik Orange Action® Regency® (Glass and Surface)

• Clorox Clean-Up®

• Glass Plus®

• Fantastik Oxy Power Multi-Purpose Cleaner®

• DeckMAX®

• M1 House Wash®

• LA’s Totally Awesome® All-Purpose Cleaner

Does cellular PVC trim and/or cellular PVC require painting? No. Cellular PVC trim does not require painting but, like any cellular PVC product, it will weather over time and painting will enhance these beautiful products to maintain color consistency for many years. Our cellular trim products are ready for painting and require very little preparation. Painting with a good quality, vinyl safe 100% Acrylic Latex paint will enhance these beautiful products to maintain color consistency for many years. There are several paint manufacturers that will warranty their coating products on cellular PVC trim for 20 years or more. Our Warranty does not cover painted finishes or coating applied to the Product by the original purchaser or any third party.

If I do paint, what type of paint should I use? For white or light colors, we recommend a high quality 100% acrylic latex paint developed for TRIM. There are paint manufacturers that sell coatings specifically designed for PVC trim and mouldings. These paints are typically referred to as “vinyl safe” paints, or heat reflective coatings for vinyl.

If you are going to paint the product a darker color, consult the paint manufacturer for the LRV (light reflective value). Painting our cellular PVC product with paints darker than 56 to 0 (zero being Black) on the LRV scale voids any warranty.


Product Cross ReferenceProduct Cross Reference

NUMERIC LISTING

2018......................................23

2021......................................20

2024......................................22

2046......................................23

2149......................................17

2150......................................22

2258......................................22

2330......................................23

2341......................................12

2342......................................15

2343......................................15

2345......................................16

2355......................................15

2369......................................14

2435......................................20

2448...............................12, 17

2449......................................11

2449......................................18

2450......................................22

2497......................................17

2536......................................11

2536......................................23

2542......................................11

2542......................................23

2590......................................14

2591......................................17

2592......................................19

2598......................................20

2599......................................21

2689......................................22

2709......................................18

2746......................................15

2759......................................22

2791......................................18

2852......................................14

2853......................................20

3029......................................17

7117......................................16

7118......................................16

7152......................................15

7158......................................19

7181......................................13

7202......................................21

7216......................................14

7241......................................13

7252......................................12

7351......................................12

7371......................................12

7372......................................13

7435......................................16

7467......................................14

7491......................................19

7526......................................12

7527......................................23

7541......................................19

7631......................................16

7640......................................16

7651......................................13

7661......................................19

7662......................................19

7710......................................15

7712......................................20

7714......................................21

7717......................................16

7719......................................23

7788......................................22

7836......................................11

7838......................................11

7901......................................21

7960........................................ 6

7970........................................ 6

7971........................................ 6

7972........................................ 6

7973........................................ 6

7993........................................ 4

7994........................................ 5

9701........................................ 4

9706........................................ 5

9707........................................ 5

9732......................................21

9734........................................ 4

9735........................................ 4

9760........................................ 6

9789......................................21

9794........................................ 5

9795........................................ 5

9796.....................................4,6

9800........................................ 5

9801........................................ 5

Royal Trimboard ...................7,8

Royal SurEdge ......................... 9

Royal Trimboard Sheet Stock 10

Item # Page Item # Page Item # Page

ALPHABETIC LISTING

1x12 S4S Trimboard ........................ 7838 ........111x8 S4S Trimboard .......................... 7836 ........11Architectural Uniflex Thermostop ... 2591 ........17Backband ........................................... 7152 ........15Backband ........................................... 7710 ........15Backband Casing .............................. 2590 ........14Base Cap WM164 ............................ 2450 ........22Base Shoe WM126 .......................... 2046 ........23Base WM623 .................................... 7527 ........23Beaded Planking ............................... 9734 .......... 4Bed Mould ......................................... 7712 ........20Bed Mould WM75 ............................ 2598 ........20Brick Mould ....................................... 2448 ..12, 17Brick Mould Bendable ...................... 2341 ........12Brick Mould RM180 ........................ 7371 ........12Brick Mould WM180 ....................... 7526 ........12Casing ................................................ 2342 ........15Casing ................................................ 2746 ........15Casing ................................................ 2852 ........14Colonial Casing ................................. 2343 ........15Colonial Casing ................................. 2355 ........15Colonial Stop ..................................... 7788 ........22Conceal 1" Water Table .................... 9796 .......4,6Conceal Gable Trim .......................... 9760 .......... 6Corner WM205 ................................ 7719 ........23Crown ................................................ 7661 ........19Crown ................................................ 7662 ........19Crown WM45 ................................... 7491 ........19Crown WM47 ................................... 2592 ........19Crown WM48 ................................... 7541 ........19Crown WM49 ................................... 2435 ........20Crown WM53 ................................... 2853 ........20Door Frame Jamb ............................. 7181 ........13Door Frame Jamb Kit ....................... 7241 ........13Drip Cap ............................................ 2449 ........18Drip Cap ............................................ 2791 ........18Finish Trim ......................................... 9732 ........21Flat Utility Trim.................................. 2709 ........18Florida Brick Mould .......................... 7252 ........12Garage Door Stop ............................. 2149 ........17High Heat Beaded Planking ............. 9735 .......... 4Inside Corner ..................................... 2536 ........11Inside Corner ..................................... 2542 ........11J-Channel Brick Mould .................... 7351 ........12J-Channel Casing ............................. 7467 ........14J-Channel Casing ............................. 7651 ........14

Jamb .................................................. 2497 ........17Jamb Extender .................................. 7372 ........13Lattice ................................................ 2018 ........23New Construction Surround ............ 9794 .......... 5New Construction Surround ............ 9795 .......... 5New Construction Surround ............ 9800 .......... 5New Construction Surround ............ 9801 .......... 5One Piece Crown .............................. 7960 .......... 6Quarter Round .................................. 2024 ........22Quarter Round .................................. 2258 ........22Quarter Round .................................. 2689 ........22Rams Crown ...................................... 7158 ........19RB3 Casing........................................ 2369 ........14Retro Uniflex Thermostop ................ 3029 ........17Royal Trimboard ......................................All .......7,8Royal SurEdge .........................................All .......... 9Royal Trimboard Sheet Stock ................All ........10S4S Corner Board............................. 7970 .......... 6S4S Corner Board............................. 7971 .......... 6S4S Corner Board............................. 7972 .......... 6S4S Corner Board............................. 7973 .......... 6Scotia/Cove WM93 .......................... 2021 ........20Shingle Mould WM210 ................... 2599 ........21Shingle Mould WM287 ................... 7202 ........21Shingle/Panel Mould ........................ 7714 ........21Shingle/Panel Mould ........................ 7901 ........21Sill Nose ............................................. 2345 ........16Sill Nose ............................................. 7118 ........16Sill Nose ............................................. 7435 ........16Sill Nose ............................................. 7631 ........16Sill Nose ............................................. 7640 ........16Sill Nose ............................................. 7717 ........16Skirt Board ........................................ 7993 .......... 4Skirt Board ........................................ 9701 .......... 4Square ................................................ 2330 ........23Square ................................................ 2536 ........23Square ................................................ 2542 ........23Standard Trim.................................... 7994 .......... 5Standard Trim.................................... 9706 .......... 5Standard Trim.................................... 9707 .......... 5Starter Strip/Drip Cap ...................... 2449 ........11Stop .................................................... 2150 ........22Stop .................................................... 2759 ........22Wide/Column Base ........................... 9789 ........21Williamsburg Casing ......................... 7216 ........14Window Sill ....................................... 7117 ........16

Description Item # Page Description Item # Page


Notes Notes

Product Spec Guide - Royal Building Products 42.22 56.3 LENGTH(S) 12' 16' PCS/BDL 4 LBS/BDL 32.9...

Documents

Transcript of Product Spec Guide - Royal Building Products 42.22 56.3 LENGTH(S) 12' 16' PCS/BDL 4 LBS/BDL 32.9...