Product Sheet - Tekni-Plex Flexapharm P… · Barrier Films for Pharmaceutical Packaging...
Transcript of Product Sheet - Tekni-Plex Flexapharm P… · Barrier Films for Pharmaceutical Packaging...
Product Sheet Barrier Films for Pharmaceutical Packaging
Flexapharm® PVC Mono PVC
Flexapharm® PVC Mono
PVC
Review date 5 May 2016
Tekni-Films USA1445 Timberwolf DriveHolland, OH 43528 • USATel : +1 908 566 1127E-mail: [email protected]
Tekni-Plex Gallazzi SrlVia S. Allende 621049 Tradate (VA) • ItalyTel : +39 0331 815 211E-mail: [email protected]
Tekni-Films EuropeIndustrielaan, 379320 Erembodegem • BelgiumTel : +32 53 650 711E-mail: [email protected]
Tekni-Films South AmericaTimoteo Gordillo 54901439 Buenos Aires • ArgentinaTel : +54 11 4605 4042E-mail: [email protected]
Disclaimer: The information set forth in this brochure is subject to change without notice and must be confirmed at time of purchase. Tekni-Plex makes no warranty, express or implied, with respect to this information and disclaims all liability from reliance on it. Tekni-Plex specifically disclaims all other warranties, express or implied, with respect to the products, including, but not limited to, warranties of merchantability and fitness for a particular purpose. Nothing herein shall constitute or imply any promise to enter into a legally valid relationship.
Aclar® is a Honeywell registered trademark • Flexapharm® is a Tekni-Plex Gallazzi registered trademark Tekniflex® is a Tekni-Plex registered trademark • Teknilid™ is a Tekni-Plex trademark • TekniMD™ is a Tekni-Plex trademark
EUFL1731
Chemical-Physical Properties
Flexapharm® PVC thickness (μm)
Density* (g/cm3)
Thickness Tolerance
Vicat Softening Point (°C)
(10 N, 50 °C/min) ASTM D1525
Tensile impact (kJ/m2)
DIN 53448
NS1 150µ ~ 500µ 1,36 ± 5% 80 ± 1 ≥ 400
NS61 150µ ~ 300µ 1,36 ± 5% 85 ± 1 ≥ 400
NS6 100µ ~ 120µ 1,36 ± 10% 80 ± 1 ≥ 400
NS46 300µ ~ 500µ 1,35 ± 5% 76 ± 1 ≥ 400
NS40 60µ 1,31 ± 10% 85 ± 1 ≥ 500
* Referred to clear PVC
Product Sheet Barrier Films for Pharmaceutical Packaging
Flexapharm® PVC MonoPVC
GRADE DESCRIPTION AND APPLICATION
Flexapharm® NS1 Homo-/Co-polymer blend PVC film for pharmaceutical blisters, with improved thermoforming performance
Flexapharm® NS61 Homo-polymer PVC film for pharmaceutical blisters, with improved heat resistance
Flexapharm® NS6 PVC film for lamination with PE for suppository blisters
Flexapharm® NS46 PVC film for deep-draw thermoforming applications with good impact performance for pharmaceutical ampoule-trays
Flexapharm® NS40 PVC film for lamination with aluminum foil for “cold form” blisters