PRODUCT SHEET Automatic Retractable Bollards (BEA s)V2-EN).pdf · « Tradition » electro-hydraulic...
1
Z.A. du Couquiou – 84320 ENTRAIGUES – France Tel. : +33 490 480 800 – Fax. : +33 490 480 088 E-mail : [email protected] www.urbaco.fr PRODUCT SHEET Automatic Retractable Bollards (BEAs) Tradition, Diameter 250 mm / Height 630 mm DESCRIPTION « Tradition » electro-hydraulic automatic retractable bollard, height 630 mm for a diameter of 250 mm. It is composed of structural parts in cast ductile iron: casing, carriage, cross hitch, bollard head (except Vendôme) and cover. A thick plastic ring maintains the bollard vertical and reduces friction. The bollard top is circled with a ring of red LEDs, flashing when the bollard is in motion or steady when it is upward. The lost casing (in galvanised steel) available as an option will facilitate the embedding of the bollard. Intellectual Property of URBACO – Not to copy – Specifications are not contractual – Changes likely to be made without any notice – Most of the models shown are registered – March 2008 Depending on the PLC programme entered (to be ordered separately). The bollard is actuated down by the user (contactless card, remote control, keypad, etc.) It will be actuated upward either automatically or manually. OPTIONS AND ACCESSORIES SURFACE FINISH Cylinder and Acropole: Zinc primer, oven baked for increased resistance to oxidation and better adherence surface to the finishing coating. Thermosetting polyester powder coating, matt finish, Standard colour, RAL 7016 (charcoal grey) Vendôme: 316L stainless steel + passivation (for increased resistance to oxidation) + PG320 polishing. Ring of red LEDs or white reflective tape band (yellow for Vendôme models) - Colours: other RAL colours (except Vendôme), - Ring of white LEDs, - Lost casing, - Heater (6), - Hydraulic flexible tubing (7) (♂ & ♀ couplings, with oils, ready for use to connect the bollard to the technical centre). A- Casing E- Carriage B- Cross hitch F- Plastic friction ring C- Cover G- Ring of LEDs D- Bollard head 1- Upper limit switch sensor 2- Lower limit switch sensor 3- Hydraulic cylinder 4- Hydraulic braces 5- Oil distribution 6- Heater 24VAC, optional The hydraulic bollard is delivered together with: - 25 m flexible cable 5 x 1 mm². COMPONENTS Impact Resistance Life Span Weight 4.5 Mio cycles from 160 to 200 kg Material Thickness Can withstand the impact of a vehicle at 48 km/h (except Vendôme) ) Ductile Cast Iron Stainless (Vendôme) ) Height upward TRADITION BEA Ø250 mm MODELS 630 mm ACROPOLE (ACE) BHACEF60C CYLINDER (CLP) BHCLPF60C VENDOME (VDM) BHVDMF60IC Tradition Range FP-BEATH(V2-EN) OPERATION 3 1 2 1 2 4 5 6 A B C D The Acropole model with thin vertical grooves. The Cylinder model with a smooth surface. The Vendôme model, 316L stainless steel PG320 polishing. Electro-Hydraulic Drive E F 6 Rolex Headquarters, Geneva, Switzerland Vendôme H 600 retractable bollard G 5 7 Connect to cylinder (jack) Connect to flexible tubing Connect to hydraulic group Connect to bollard ACROPOLE (ACE) CYLINDER (CLP) VENDOME (VDM) In compliance with France’s NF P98-310 standard 630 mm * BHACEF60 BHCLPF60 BHVDMF60I Ring of LEDs Reflective tape band *: except models Cylinder with reflective tape band: H 600 mm
Transcript of PRODUCT SHEET Automatic Retractable Bollards (BEA s)V2-EN).pdf · « Tradition » electro-hydraulic...
Z.A. du Couquiou – 84320 ENTRAIGUES – France Tel. : +33 490 480 800 – Fax. : +33 490 480 088
E-mail : [email protected] www.urbaco.fr
PRODUCT SHEET Automatic Retractable Bollards (BEA s)
Tradition, Diameter 250 mm / Height 630 mm
DESCRIPTION « Tradition » electro-hydraulic automatic retractable bollard, height 630 mm for a diameter of 250 mm. It is composed of structural parts in cast ductile iron: casing, carriage, cross hitch, bollard head (except Vendôme) and cover. A thick plastic ring maintains the bollard vertical and reduces friction. The bollard top is circled with a ring of red LEDs, flashing when the bollard is in motion or steady when it is upward. The lost casing (in galvanised steel) available as an option will facilitate the embedding of the bollard.
Inte
llect
ual P
rope
rty
of U
RB
AC
O –
Not
to c
opy
– S
peci
ficat
ions
are
not
con
trac
tual
– C
hang
es li
kely
to b
e m
ade
with
out a
ny n
otic
e –
Mos
t of t
he m
odel
s sh
own
are
regi
ster
ed –
Mar
ch 2
008
Depending on the PLC programme entered (to be ordered separately). The bollard is actuated down by the user (contactless card, remote control, keypad, etc.) It will be actuated upward either automatically or manually.
OPTIONS AND ACCESSORIES
SURFACE FINISH Cylinder and Acropole: Zinc primer, oven baked for increased resistance to oxidation and better adherence surface to the finishing coating. Thermosetting polyester powder coating, matt finish, Standard colour, RAL 7016 (charcoal grey) Vendôme: 316L stainless steel + passivation (for increased resistance to oxidation) + PG320 polishing. Ring of red LEDs or white reflective tape band (yellow for Vendôme models)
- Colours: other RAL colours (except Vendôme), - Ring of white LEDs, - Lost casing, - Heater (6), - Hydraulic flexible tubing (7) (♂ & ♀ couplings, with oils, ready for use to connect the bollard to the technical centre).
A- Casing E- Carriage B- Cross hitch F- Plastic friction ring C- Cover G- Ring of LEDs D- Bollard head 1- Upper limit switch sensor 2- Lower limit switch sensor 3- Hydraulic cylinder 4- Hydraulic braces 5- Oil distribution 6- Heater 24VAC, optional The hydraulic bollard is delivered together with: - 25 m flexible cable 5 x 1 mm².
COMPONENTS
Impact Resistance
Life Span
Weight
4.5 Mio cycles
from 160 to 200 kg
Material
Thickness Can withstand the impact of a vehicle
at 48 km/h (except Vendôme) )
Ductile Cas t Iron Stainless (Vendôme )
)
Height upward
TRADITION BEA Ø250 mm MODELS
630 mm
ACROPOLE (ACE)
BHACEF60C
CYLINDER (CLP)
BHCLPF60C
VENDOME (VDM)
BHVDMF60IC
Tradition Range
FP-BEATH(V2-EN)
OPERATION
3
1 2
1
2
4
5
6
A
B
C
D
The Acropole model with thin vertical grooves. The Cylinder model with a smooth surface. The Vendôme model, 316L stainless steel PG320 polishing.
Electro-Hydraulic Drive
E
F
6
Rolex Headquarters, Geneva, Switzerland Vendôme H 600 retractable bollard
G
5
7
Connect to cylinder
(jack)
Connect to flexible
tubing
Connect to hydraulic
group
Connect to bollard
ACROPOLE (ACE)
CYLINDER (CLP)
VENDOME (VDM)
In compliance with France’s NF P98-310 standard
630 mm * BHACEF60 BHCLPF60 BHVDMF60I
Ring of LEDs
Reflective tape band
*: except models Cylinder with reflective tape band: H 600 mm
