Product range - SectIonS and acceSSorIeS For tecHnIcaL … · Product range - SectIonS and...

� �

�

�

�

�

�

�

� �

11

12

13

� �

�

�

�

�

�

�

� �

11

12

13

Product range - SectIonS and acceSSorIeS For tecHnIcaL aIr duct SYSteMSMISSIon SeaL cLaSS d

2

aBout uS

GEBHARDT-STAHL has made steel green ... in

more ways than one: namely we incorporate

butyl, the green sealant, into our duct profiles.

This gives air ducts an extremely good seal,

makes them energy efficient, and ultimately en-

vironmentally friendly: i.e. green. All this saves

time and money during the installation proc-

ess. Therefore, at GEBHARDT-STAHL, we bring

‘Made in Germany’ right up to date and make it

relevant to today’s industry.

Environmental considerations, new material

combinations and surprising ideas are factors

which we apply again and again: for special

profiles for elevators, for machines, for shelves

... in fact, for whatever you want! What’s more,

in the field of air ducts, we are a single-source

supplier.

GEBHARDT-STAHL is strong when it comes to

expertise and young at heart... making waves

in the steel industry since 1973. Our first suc-

cesses came early on: In 1990, the first ware-

house was built; in 1993, the hall space was

doubled to 5,000 m²; in 2002, the new office

building was built and in 2004, another 2,500 m²

production area was added. Since 2010,

GEBHARDT-STAHL has been manufacturing at

its headquarters in Werl with significantly in-

creased capacity the company now has a total of

9,500 m² hall space. As far back as 2001, we set

up our affiliated company GEBHARDT-STAHL

Polska in Stare Miasto (Poland) in order to sup-

port the company. In addition to this, we have

manufacturing and warehousing capacity in

Dommershausen and Frankfurt/Oder. With a

total of ten section rolling mills, GEBHARDT-

STAHL processes 70,000 tonnes of steel annu-

ally, and this figure is growing. Reliable busi-

ness associates in the field of logistics and

manufacturing provide additional assistance.

Our key asset however, is not our state-of-the-

art rolling mills, the laser technology or the de-

sign tools/CAD systems... it’s the expertise of

our 120 employees. Consequently, in this point

as well, GEBHARDT-STAHL is somewhat differ-

ent to other companies. And as such, in over 40

countries worldwide, we are able to react very

quickly, provide immediate service and satisfy

(almost) all requirements.

3

conSerVe reSourceS WItH geBHardt-StaHL

innovationEXPERtiSEaiR tiGHtnESS

4

Your coMPetent geBHardt-StaHL teaM

Peter SchulteArea Manager

Birgit Possmeier-SchulzSales

COMPETENT SERVICEINDIVIDUAL ADVICE

Meinolf SchweinsSales

Werner WenzlokatHead of Sales

Sabrina Ramm Sales

Sylvester NierebinskiSales Poland

5

the gebhardt-Stahl fox will show you the particularly innovative products!

Air duct profiles ‘D’ 7

Air duct profiles ‘C’ 9

Clamp with bolt ‘plus’ 17

Slide mount 19

Anti vibration hanger (heavy duty) 22

Sealing tape 26

Zinc repair spray 27

Access doors 30

Universal assembly system for spiral seam tubes 33

Drill screw 35

Weather louvre 41

Pneumatic punch press 43

air duct profiles, corner piecesAir duct profiles, ‘P’ & ‘S’ & ‘D’ corners + Premium 7-12Air profiles, ‘S’ corners 14-15Air profiles, ‘L’ corners 16ask for the separately available table: combination profiles/corners

air duct connections Drive cleat, clamps with bolt 17Sheet metal fastener, reinforcing profile 18Technical fastening equipment, slide mount 19

duct suspensions Support sections 20Insulation rubber for support sections 20Protective caps for support sections 20Technical fastening equipment - threaded rods 21Technical fastening equipment - connector bushing 21Technical fastening equipment - perforated strip 21Technical fastening equipment - anti vibration hangers 22

duct reinforcement Duct reinforcement and accessories 23T-section 23

Flexible elements Flexible connections 24Flexible strips 24

Sealants and connection accessories Gebhardt Plast 25Processing equipment for sealants 26PVC glue 26Sealing tape 26Zinc repair spray, aluminium spray, stainless steel spray 27

other productsDamper quadrants 28-29Access doors for rectangular ducts 30Access doors for round and oval ducts 31Clamps for spiral seam tubes 32Universal assembly system for seam tubes 33-34Drill screws with a square drive 35Pneumatic punch press 43

Self-assembly construction systems Modular volume control damper 36-39Aluminium profiles + accessories for climate boxes 40Weather louvre 41-42

6

0,0014

0,0012

0,0010

0,0008

0,0006

0,0004

0,0002

0

-0,0002

-0,0004

Test duct internal pressure: Ptest (Pa)

Seal factor in accordance wi th DIN EN 1507:2006 (f=m3 x s -1 x m-2)

-750 -500 -250 0 250 500 750 1000 1250 1500 1750 2000

Air seal class A

Air seal class C

P20 D

Air seal class B

Air seal class D

Please follow our installation instructions

P30 D

cLaSS d – ProFILeS WItH a ButYL SeaLant

We enSure a good SeaL!

Why choose seal class c + d profiles?

The target flow rates at the air outlet are achieved and the desired room air condition is assured

The target flow rates at the air outlet are achieved and the used air/harmful substances are channelled away optimally

Easy regulation of the system is possible, whereby the pressure level between the rooms is optimized

Prevention of particle and bacterial contamination

The filtered air remains clean

Reduction of odours

Improvement of the optical impression by avoiding dust through air leakage

The innovative, patented profiling guarantees high stability and assures simple/secure processing

Longitudinal edge sealing is not necessary and as such, this saves resources

Benefits at a glance:

class c + d seal TÜV certified

Saves costsThe section does not require any additional sealing and sealants

Saves time Through the high adhesive strength of the butyl, you can dispense every 2nd welding point

easy application Quick and easy handling

damping of structure-borne noiseLess noise is made

conserves resources Efficient use of energy conserves natural resources

Save energyAs more tightness as more energy savings

trend setting

c+d

100%installation surcharge in

accordance with tÜV specifications


Test duct inner pressure: Ptest (Pa)

class a/dIn en 1507

class c/dIn en 1507

class B/dIn en 1507

class d/dIn en 1507

Seal factor in accordance with dIn en 1507:2006 (f=m3 x s -1 x s-2)

7

-3˚-3˚

73

9

103

13

73

9

103

13

1. The Premium 20 and Premium 30 profiles with butyl effortlessly achieve seal class D in accordance with DIN EN 1507 (incl. 100% installation allowance). This is of course certified by TUV Nord.

2. Compared to the conventional profile, the torsional rigidity of the premium profile is 20 times greater.

3. Together, the profile and corner piece form a rigid connection. Through the clinching of the premium profile, an extra rigid angular chamber is created. The torsional rigidity leads to outstanding handling and installation qualities of the profiles.

Premium profiles – class d seal

Premium 20 and Premium 30 500 m bundles

P 20/3 S 30/4Galvanized art. no. 302 010 010 art. no. 302 050 500volume unit/box 500 pcs. 250 pcs.

P 20 D P 30 DHot-dip galvanized art. no. 301 050 402 art. no. 301 050 502bundles 500 m 500 m

Torsion rigidity = 20 x greater

Protection rights

announced

P 20/3 V S 30/3Galvanized art. no. 302 010 015 art. no. 302 550 500volume unit/box 500 pcs. 250 pcs.

corners

Recommended dimension to be cut: edge length minus 32 mm

THE ADVANTAGES oF tHe PreMIuM ProFILeS

8

0,0014

0,0012

0,0010

0,0008

0,0006

0,0004

0,0002

0

-0,0002

-0,0004

Test duct internal pressure: Ptest (Pa)

Seal factor in accordance with DIN EN 1507:2006 (f=m3 x s -1 x m-2)

-750 -500 -250 0 250 500 750 1000 1250 1500 1750 2000

Air seal class A

Air seal class C

P20 C

Air seal class B

Air seal class D


P30 C

100%installation surcharge in

accordance with tÜV specifications


Test duct inner pressure: Ptest (Pa)

class a/dIn en 1507

class c/dIn en 1507

class B/dIn en 1507

class d/dIn en 1507

Seal factor in accordance with dIn en 1507:2006 (f=m3 x s -1 x s-2)

cLaSS c – ProFILeS WItH a ButYL SeaLant

THE INNOVATIVE SOLUTION: specially developed butyl sealant

9

ZERTIFIKAT

über ein Kanalflanschprodukt für Lüftungskanäle

TÜV NORD Systems GmbH & Co. KG Bereich Engineering

Prüfstelle für Kälte-, Klima- und Lüftungstechnik

Langemarckstrasse 20 45141 Essen bestätigt der Gebhardt Stahl GmbH Runtestrasse 33 59457 Werl

dass für die auf dem durch TÜV NORD Systems GmbH & Co. KG zertifizierten werkseigenen

Prüfstand für Luftkanalelemente untersuchten Bauelemente Produktbezeichnung: P40 C

die nachfolgend aufgeführten Vorgaben als erfüllt anzusehen sind.

Hinsichtlich der Normen DIN EN 1507: 2006 wird bestätigt, dass die mechanische Stabilität und die

Dichtheitseigenschaft des geprüften Produktes gemäß Tabelle 1 der DIN EN 1507: 2006 mit

hinreichender Genauigkeit ermittelt und damit vergleichbar gemacht werden konnte. Die im

Prüfstandshandbuch beschriebenen Prozeduren und Arbeitsanweisungen wurden befolgt und

reproduzierbare Ergebnisse sichergestellt.

Daher gilt: Bei Montage gemäß der Anleitung von Gebhardt Stahl kann die geprüfte

Flanschausführung den Anforderungen der

Dichtheitsklasse C nach DIN EN 1507: 2006 genügen.

Es wird außerdem bestätigt, dass die Anforderungen der Dichtheitsklasse C gemäß

der DW/144 (Specification for Sheet Metal Ductwork / 1998) erfüllt werden.

(siehe „GS-027 bis GS-029 Prüfbericht P40C Butyl Zertifizierung“ vom 29.09.2011)

Essen, 10. Oktober 2011

Die Sachverständige

Dipl.-Ing. Monika Steimle

cLaSS c – ProFILeS WItH a ButYL SeaLant

certified in accordance with dIn en 1507:2006 Class C seal criteria (in accordance with DW 144) is also met Smacna in preparation

Butyl certified in accordance with VdI 6022Conforms to the strict health regulations

utility model protection DE 20 2007 016 521 U

this saves your customers cash and protects the environment [example calculation]

Operating pressure: 400 Pa, duct area 500m2 Fully air-conditioned: energy costs € 4,000/annum

By selecting a class C duct as opposed to a class B duct: additional costs are amortized in about 2 years *

*Assuming estimated additional costs of 2 €/m2 duct

‘P’ profiles - class c seal

P 20 C and P 30 C are in stock in 500 m bundles

‘P’ corner pieces


-3˚ -3˚ -3˚

P 20 C P 30 C P 40 CHot-dip galvanized art. no. 301 050 311 art. no. 301 050 411 art. no. 301 030 656

73

9

103

13

P 20/3 P 30/4 P 40/4Galvanized art. no. 302 010 010 art. no. 302 050 010 art. no. 302 080 010volume unit/box 500 pcs. 250 pcs. 150 St.

123

13

TÜVNORD

10

a good SeaL FroM tHe VerY Start

P-series

Engineers, builders and authorities require the best possible seals in duct systems. To achieve these seals, frames have had to be sealed by the manufacture using putty, etc. Our ‘P’ air duct system for class C seals dispenses with this the process as well as time and the sealant material itself. The refined profile also offers high levels of stability and allows easy installation.

the key benefits:

Due to well developed profiling, the best possible seal without the subsequent need for putty and/or injected sealants. Seal testing with TÜV certification.

On account of the 30 ° - double profiling and slant, a high level of stability without the usual leakage.

The web heights of our 20, 30 and 40 profiles are identical: therefore, only a slide rail or a threaded clamp for all sections.

Effortless insertion of the section on the fitting, as the lower section edge is longer than the top edge.

Also available: P 20/P 30 with butyl sealant. through this, the flange connections are suitable for realising class c seal (IV) systems (dIn en 1507).

INNOVATIVEPROFILING

1

2

3

4

5

11

-3˚ -3˚ -3˚

P 20 P 30 P 40

‘P’ ProFILeS

P 20 P 30 P 40

hot-dip galvanized

art. no. 301 010 010 art. no. 301 020 010 art. no. 301 030 610

stainless steel 4301 art. no. 301 010 340 art. no. 301 020 440 –stainless steel 4404 art. no. 301 040 441 art. no. 301 040 442 –aluminium Al Mg 3 art. no. 301 010 375 art. no. 301 020 475 –

‘P’ profiles

P 20 and P 30 are available in lengths of 5 m and 500 m bundles. P 40 is available in lengths of 5.50 m and 550 m bundles.

Patented

Installation recommendations are available on request.

63 73 95 103

103123

10373

12

73 95

9 9 9 13

13 129

131399

P 20/3 K P 20/3 P 20/3 L P 30/4galvanized art. no. 302 010 020 art. no. 302 010 010 art. no. 302 220 010 art. no. 302 050 010stainless steel 4301 – art. no. 302 010 340 – art. no. 302 050 340aluminium Al Mg 3 – art. no. 302 010 070 – art. no. 302 050 070volume unit/box

galv. 500 pcs.–

galv. 500 pcs.stainless steel/ aluminium 100 pcs.

galv. 500 pcs.–

galv. 250 pcs.stainless steel/ aluminium 50 pcs.

P 20/3 V P 20/3 LV P 30/V P 40/4galvanized art. no. 302 010 015 art. no. 302 220 015 art. no. 302 550 010 art. no. 302 080 010stainless steel 4301 art. no. 302 010 341 – art. no. 302 550 015 –stainless steel 4404 art. no. 302 010 040 – art. no. 302 050 040 –

volume unit/box 500 pcs./ s. steel 100 pcs. 500 pcs. 250 pcs./ s. steel

50 pcs. 150 pcs.

D 20/3 D 30/4galvanized art. no. 302 020 010 art. no. 302 060 010volume unit/box 500 pcs. 250 pcs.

‘P’ corner


‘d’ corner


Long slotted versions are available upon request!

13

PrecISe · VerSatILe · ProFeSSIonaL

IT IS THE CORNER THAT MATTERS

-3˚ -3˚-3˚

14

-3˚ -3˚

-3˚-3˚

S 20 S 30

S 20 S 30

S 40

PR 20 PR 30

‘S’ & ‘Pr’ ProFILeS

‘S’ & ‘Pr’ profiles

An alternative flange system to our patented ‘P’ profiles.

Available in stock in lengths of 5.00 m and in 500 m bundles.

S 40 is available in stock in lengths of 5.50 m and in 550 m bundles.


S 20 S 30art. no. 301 010 504 art. no. 301 020 504

open type ‘S’ profiles

The S 20 and S 30 sections are available in stock in lengths of 5 m and in 500 m bundles.Open type for manufacturing flexible duct connections.


S 20 S 30 S 40

hot-dip galvanized

art. no. 301 010 500 art. no. 301 020 500 art. no. 301 030 652

stainless steel 4301 – – art. no. 301 030 651

PR 20 PR 30Hot-dip galvanized art. no. 301 050 403 art. no. 301 050 503bundles 500 m 500 m

15

‘S’ corner

‘S’ corner Suitable for the ‘S’ section system

S 30/4 S 30/3 P 40/4galvanized art. no. 302 050 500 art. no. 302 550 500 art. no. 302 080 010stainless steel 4301 – – art. no. 302 080 501volume unit/box 250 pcs. 250 pcs. 150 pcs.

P 20/3 K P 20/3 P 20/3 L P 20/3 V P 20/3 LV

galvanized art. no. 302 010 020 art. no. 302 010 010 art. no. 302 220 010 art. no. 302 010 015 art. no. 302 220 015

volume unit/box

500 pcs. 500 pcs. 500 pcs. 500 pcs. 500 pcs.

Recommended dimension to be cut: edge length minus 32 mmLong slotted versions are available upon request!

103123

Recommended dimension to be cut: edge length minus 10 mm Also applies to the open design.

D 20/3 SD 30/Vgalvanized art. no. 302 020 010 art. no. 302 090 010volume unit/box 500 pcs. 250 pcs.

73

129

103

1613

P 20/3 VH S 30/3 Hgalvanized art. no. 302 010 019 art. no. 302 550 519volume unit/box 500 pcs. 250 pcs.

63 103

129 1613

1313

63

9

95

99

73 73

9

95

9

103

13

9575

105105

16

-3˚ -3˚

99

13 13

L 20 L 30

‘L’ ProFILeS and cornerS

L 20 L 30

hot-dip galvanized

art. no. 301 500 010 art. no. 301 520 010

stainless steel 4301 art. no. 301 500 040 art. no. 301 520 040

L 20/3 K L 20/3 Lgalvanized art. no. 302 500 010 art. no. 302 510 010stainless steel 4301 art. no. 302 500 040 –

volume unit/box galv. 500 pcs./s. steel 100 pcs. galv. 500 pcs.

L 30/4 L 30/Vgalvanized art. no. 302 520 010 art. no. 302 540 010stainless steel 4301 art. no. 302 520 040 –

volume unit/box galv. 250 pcs./s. steel 50 pcs. galv. 250 pcs./s.

‘L’ profiles and corners

For ducts with simple designs ... where there is no great need for a seal

‘L’ profiles

Available in stock in lengths of 5 m and in 500 m bundles.

‘L’ corner Recommended dimension to be cut: edge length minus 30 mm


A PERMANENTCONNECTION

17

18

18,6

aIr duct connectIonS/drIVe cLeatS/cLaMP

air duct connections

4 corner screw connection is adequate for duct lengths up to 500 x 500 mm. For longer edge lengths, we recommend drive cleat or clamps. The drive cleat should be slid in lengths ranging from 75-100 mm at a distance of not more than 300 mm.

cleat

Suitable for all section sizes The P, L and S system in lengths of 5 m and 500 m bundles, thickness 1.2 mm

clamp with bolt

Suitable for all profiles, with screw M 8 x 20 mmClamp "plus": with V-stamping and special formed points for a better grip

hot-dip galvanized ‘P’ art. no. 303 010 010stainless steel 4404 ‘P’ art. no. 303 010 040hot-dip galvanized ‘L’ art. no. 303 500 010

bundles = 100 mhot-dip galvanized, ‘S’ round art. no. 303 010 500

Standard "plus"galvanized art. no. 303 021 011 art. no. 303 021 012stainless steel 4404 – art. no. 303 021 040volume unit/box 200 pcs. 200 pcs. Standard "plus"

18

Sheet metal fastener-smallFor sheet metal ranging from 0.75 to 0.90 mm thick

For air duct slides fastenings in air ducts.

For metal sheets ranging from 0.90 to 1.20 mm thick. Silicone-free seal. When the fastener is hammered in, choosing a fastener with a wider shape allows the air duct slides to draw air in. With an extra holding fixture for the outer contour of the fastener.

Fastener with fitted sealing washer art. no. 306 030 010volume unit/box 1000 pcs.

Fastener with sealing washer (separate) art. no. 306 010 010volume unit/box 1000 pcs.

Fastener with large sealing washer (separate) art. no. 306 020 010volume unit/box 1000 pcs.

Fastener with fitted sealing washer (large) art. no. 306 040 010volume unit/box 1000 pcs.

Fastener with fitted sealing washer-PLUS- art. no. 306 050 010volume unit/box 1000 pcs.

the factors that matter:

Simple and quick to secure using a hammer

No need for welding, riveting or for the sheets to be edged

Increased resistance to being stripped away through an s-shaped metal sheet insert running in parallel

With an attachable elastic sealing washer

Corrosion-resistant due to galvanizing

Suitable for various metal thicknesses and materials

Also for the attachment of louvre blades in weather-proof grids

And used everywhere where T-shaped connections of metal sheets are necessary

sealing washer

reinforcing profile for airduct slides art. no. 306 200 010bundle 500 m

reinforcing profile

Sealing pad for air duct art. no. 311 089 000

Sealing pad

the -PLuS- sheet plug

The Gebhardt-Stahl sheet metal fastener has now been improved. Depending on the sheet thickness, the pull-off force of the new sheet fastener is now up to 2-3 times greater than conventional ones. This has been proven in various trials which have been set up to examine tractive forces. With regard to the hardness of the, thickness and accuracy of fit, the sealing washer has been optimised in such a way that the fastener is pressure tight when fitted professionally. With the additional Gebhardt-Stahl sealing pad, ‘every other’ fastener is also sealed tight.

fastener-large

fastener-PLUS-

fastener-small

For metal sheets ranging from 0.90 to 1.20 mm thick.

neW

19

tecHnIcaL FaStenIng eQuIPMent/ SLIde Mount

art. no. 313 500 010volume unit/box 50 pcs.

Quick. Practical. Stable.

Significant savings in terms of material and time compared to conventional assembly systems

Suspension takes place at the most stable point i.e. the frame and not on the sheet, as is the case in conventional systems

Great improvement in overall stability as a result of the dual function, i.e. threaded clamp/slide rail and suspension all combined in one element

Easy installation. The slide assembly is attached using light hammer blows. It then sits securely and safely

Screwless assembly means that the duct surface is not damaged

Slide mount for ‘P’ profiles

onLY For ‘P’ ProFILeS!

20 30

30

13

45

50

10,75 20

15

25

75

28

6

6,5

20

13

30

13

30

SuPPort SectIonS

T 20 (30 x 20 mm) T 30 (30 x 30 mm) T 45 (30 x 45 mm)black art. no. 305 210 000 art. no. 305 220 000 art. no. 305 230 000volume unit/bag 100 pcs. 100 pcs. 100 pcs.

volume unit/box 75 m art. no. 305 110 000

T 20 T 30 T 45hot-dip galvanized, 5 m art. no. 305 020 010 art. no. 305 050 010 art. no. 305 080 010hot-dip galvanized, 2 m art. no. 305 020 011 art. no. 305 050 011 art. no. 305 080 011

Support sections

Available in stock in lengths of 5 m and 500 m bundles, thickness 1.75 mm Load capacity certification and differing perforation patterns/sizes are available on request.

Insulation rubber for support sections

Fits for all support sections. For interrupting the sound bridge.For airduct suspension with T-rails.

Protective caps for support sections

CUSTOMISED PRODUCTIONOF SUPPORT SECTIONS ON REQUEST

21

threaded rods Galvanized

Length: 1 m BundleM 6 art. no. 314 110 010 100 pcs.M 8 art. no. 314 130 010 50 pcs.M 10 art. no. 314 150 010 25 pcs.M 12 art. no. 314 170 010 20 pcs.

Length: 2 m BundleM 6 art. no. 314 120 010 50 pcs.M 8 art. no. 314 140 010 25 pcs.M 10 art. no. 314 160 010 20 pcs.M 12 art. no. 314 180 010 15 pcs.

Galvan. Round HexagonalM 6 x 25 mm art. no. 314 190 010 art. no. 314 230 010M 8 x 25 mm art. no. 314 200 010 art. no. 314 240 010M 10 x 25 mm art. no. 314 210 010 art. no. 314 250 010M 12 x 25 mm art. no. 314 220 010 art. no. 314 260 010volume unit/box 100 pcs. 100 pcs.

17 x 0.6 hole 6.5 mm art. no. 315 010 01025 x 0.8 hole 8.5 mm art. no. 315 020 010volume unit/box 25 m

Perforated stripGalvanized assembly strip

connector bushing

22

FaStener tecHnoLogY / antI VIBratIon HangerS

anti vibration hangers Fully assembled/DIN 4109 tested

All anti vibration hangers have improved sound insulation! [structure borne test on request]Average improvement: between 125 Hz and 4000 Hz: 7 dB; between 500 Hz and 4000 Hz: 10 dB; (tested by the institute of sound and heat insulation, Essen). All anti vibration hangers are galvanized and come with a rubber buffer and washer. These are for Ø 10 mm threaded rods with a patented screwed anti vibration rubber.

Air duct by means of an air duct support angle and/or a double support angle and threaded rods as a ceiling or wall fixture. Material thickness 2.5 mm Recommended max load. 230 N (23 kp) per support angle.


Insulation element with a washer These are for Ø 10 mm threaded rodsRubber top part with a thread




Double supprt angleLength: 60 mm/Material thickness 2.5 mm


Single support angleLength: 80 mm/Material thickness 2.5 mm

Tube hanger bracketMaterial thickness 2.0 mm

Single support angle with a stuck insula-tion part (heavy duty design) Length: 80 mm/Material thickness 4.0 mm

Load: up to 1,600 N

Load test: on request

Test report no.:W 2611/96

23

Load: up to 1,600 N

Load test: on request

duct reInForceMent/t-SectIon/acceSSorIeS

duct reinforcementEasy assembly ensures quick, easy and economical processing of the elements on-site.

art. no. 306 200 020

volume unit/Bundleeach made up of 100 bars

hole ø 6.5 mm art. no. 313 070 030hole ø 8.5 mm art. no. 313 070 010hole ø 10.5 mm art. no. 313 070 020stainless steel ø 6.5 mm art. no. 313 070 040

volume unit/box 250 pcs./s. steel 100 pcs.


Fischer dowel M 6 with a metric thread

T-section for set constructionLength: 4,000 mm T 25/20/25 x 0,8 mm

Accessories Plate for duct reinforcement, galvanized


Grip for reinforcing rod 3/8" DIN 2440 Material: Polyethylene

Hexagonal screw DIN 933-8.8 M 6 x 50 mm, galvanized, SW 10


Cross-Connector for reinforcing rod 3/8"Material: Galvanized steel

Reinforcing rodMaterial: Galvanized steel


EMBY-FixMaterial: Galvanized steel M8

M 6 x 50 mm art. no. 313 210 020M 8 x 50 mm art. no. 313 210 022volume unit/box 200 pcs.

art. no. 313 200 0126 m length · 16 x 2 mmart. no. 313 200 0106 m length · 17,2 x 2,35 mm · 3/8“

24

FLexIBLe connectorS/StrIPS

Flexible connectors

Fibre coating Width mm sheet metal/fabric/sheet metal

Temperature resistance Packaging Art. no.

polyester/PVC 45/60/45 +70° C 25 m roll 309 010 010polyester/PVC 65/95/65 +70° C 25 m roll 309 020 010

polyester/PVC 45/120/45 +80° C DIN 4102 B1flame-resistant 50 m roll 309 110 020

polyester/PVC 45/120/45 +70° C 25 m roll 309 110 010polyester/PVC/stain-less steel 45/60/45 +70° C 25 m roll 309 010 040

fibreglass/neoprene 45/60/45 +100° C 25 m roll 309 030 010fibreglass/neoprene 65/95/65 +100° C 25 m roll 309 040 010fibreglass/aluminium 45/60/45 +180 °C 25 m roll 309 050 010fibreglass/aluminium 65/95/65 +180 °C 25 m roll 309 060 010

Width Packaging Art. no.150 mm 50 m 309 070 000200 mm 50 m 309 080 0001000 mm 50 m 309 090 000various widths 309 100 000

Width Packaging150 mm 50 m 309 210 000200 mm 50 m 309 220 0001000 mm 50 m 309 230 000various widths 309 240 000

Width Packaging 150 mm 50 m 309 310 000200 mm 50 m 309 320 0001000 mm 50 m 309 330 000various widths 309 340 000

Flexible strips

PVC on both sides - coated polyester fibre, can be used up to 70 °C

Neoprene on both sides - coated fibreglass fibre, can be used up to 100 °C

Fibreglass fibre, aluminium metal-lized, in the case of contact heat, not over 180 °C; however, withstands very high temperatures above 1000 °C for a short time when the surrounding space is not heated up and there is no long-term stress.

Other dimensions on request

25

Features: • Raw materials: acrylic dispersion• Color: grey• Ready-to-use single component sealant• A sealant which is solvent-free/silicone-free,

odourless and sprayable. In addition the seal-ant can be painted over and it adheres well to metals

• Resistance to aging, weathering and fading. A sealant with plastoelastic properties

• Adheres to almost all building materials• Temperature resistance from -20 °C to +80 °C

(after full curing)• Gebhardt Plast is a fungicide, is antibacterial

and meets the hygiene regulations for use in clean rooms/the specifications of guideline VDI 6022/1

• Test report in accordance with DIN EN ISO 846

Processing: between +5 °C and +40 °C • The formation of skin takes place

within 20 - 30 minutes

Containers for shipping:

Shelf life: at least 12 months in an unopened cartridge from the production date under proper storage conditions

Used as a sealant for ventilation ducts, ambient air systems and for insulating sound in sheet metal connections.

gebhardt Plast – silicone-free – resistant to light

cartridge - each 310 ml art. no. 311 030 010boxes 20 pcs.

cartridge - each 600 ml art. no. 311 030 011boxes 20 pcs.

Bucket, each at 5 kg Art. 311 030 015Eimer 1 pc.

26

ProceSSIng eQuIPMent/PVc gLue/SeaLIng taPe

Dimensions: width x thickness Supplied as Length of roll Art. no. 9 x 4 mm 2400 m (box) 10 m 310 010 00012 x 4 mm 1800 m (box) 10 m 310 020 00015 x 4 mm 1500 m (box) 10 m 310 040 000

9 x 4 mm 2400 m (box) 10 m 310 100 000 9 x 6 mm 2400 m (box) 10 m 310 150 000 12 x 4 mm 1800 m (box) 10 m 310 110 000 15 x 4 mm 1500 m (box) 10 m 310 070 000

With a backing film

Without a backing film

Resistance to aging: Excellent, even against ozone and UV radiation Compression strain: approx. 10% at 0.5 kgf/cm2 Compression strain test: approx. 60% Temperature range: from - 70 °C to + 80 °C Specific gravity: approx. 40 to 45 kg/m3 Plasticiser content: no plasticiser contained in the product

PROFESSIONALACCESSORIES

Processing equipment for sealantsHand-gun with an infinitely variable feed system. Designed for processing sealants in 310 ml cartridges

Art. no. 311 090 010

PVc glueFor PVC-coated fabrics. Available in 850 g cans

Art. no. 309 410 000

Sealing tapeMade from polyethylene, self-adhesive, does not allow air and wa-ter to permeate, guarantees tensile strength in accordance with DIN 18361/18545, anthracite grey. Other dimensions on request

Tested to

comply wit

h

VDI6022

27

Resistance to aging: Excellent, even against ozone and UV radiation Compression strain: approx. 10% at 0.5 kgf/cm2 Compression strain test: approx. 60% Temperature range: from - 70 °C to + 80 °C Specific gravity: approx. 40 to 45 kg/m3 Plasticiser content: no plasticiser contained in the product

rePaIr SPraY

Zinc repair spray Art. no. 309 420 010Zinc aluminium spray is a self-drying anti-corrosion coating with a fresh colour and properties similar to galvanized metal. It is produced using selected binding agents that are compo-sed largely of nonvolatile parts.

• Quick drying formula• High covering power, goes a long way • Suitable substrates include steel, cast iron, aluminium, zinc, and many other materials.

Stainless steel spray Art. no. 309 420 040Stainless steel spray is a high quality nitrocombi decorative paint that features matched colour pigments in order to touch up or simulate stainless steel surfaces.

• Matched colour• Resists high levels of abrasion• Among other materials, it sticks to metal wood and plastic

aluminium spray Art. no. 309 420 070As a dry film, aluminium spray is made up of over 99 % pure aluminium and offers hear resistant protection against corrosion.

• High gloss• Resistant to weathering• Sticks to nearly all materials e.g. nonferrous metals, iron, wood and many other materials.

28

32 m

m

daMPer QuadrantS

damper quadrant

Klap 1 - adjusting lever, pin, winged screw, spring pin. For air ducts up to 200 mm in diameter.

Klap 2/3 - 12 mm axis, adjusting lever, plate, 1 round and 1 square pin, clamping screw and seal. For ducts up to 650 mm in diameter.



29

daMPer QuadrantS

Klap 4 - adjusting lever, pin, spring pin. For ducts up to 250 mm in diameter.

Klap 5 - adjusting lever, pin, spring pin. For ducts up to 500 mm in diameter.

Klap 6 - airtight damper quadrant, universal: suitable for circular and rectangular ducts. For ducts up to 650 mm in diameter.




30

access doors

For rectangular and oval ducts. Easy installation due to a 2-part structure. The unit is fixed using two hand knobs.

Steel galvanized Stainless steel on request

Sizes available

200 x 100 mm art. no. 308 010 010 volume unit/box 50 pcs.300 x 200 mm art. no. 308 020 010 volume unit/box 25 pcs.400 x 300 mm art. no. 308 030 010 volume unit/box 10 pcs.500 x 400 mm art. no. 308 040 010 volume unit/box 6 pcs.600 x 500 mm art. no. 308 060 010 volume unit/box 4 pcs.

with edge protection

Access panel for round or oval ductwork

Available in many sizes and finishes

Hand knobs for safe two-handed handling

Innovation: all grips embedded with galvanized metal thread

Quick and easy installation

The sheet metal wall is clamped between two covers

Double-shell construction

Supplied in foil bag

Large imprint on the panel for clear identification

Self-adhesive drilling template in every bag

Galvanized steel, Stainless steel on request

Additional fire protection aspect:

under affect of heat access door keeps in one piece even then knobs melting

For round and oval ductwork

edge protection art. no. 308 990 010 Edge protection, self-adhesive Rolls à 100 m

180 x 80 mm art. no. 308 100 010 volume unit/box 50 pcs. 200 x 100 mm art. no. 308 100 020 volume unit/box 50 pcs. 300 x 150 mm art. no. 308 110 010 volume unit/box 25 pcs. 300 x 200 mm art. no. 308 110 020 volume unit/box 25 pcs. 400 x 200 mm art. no. 308 120 010 volume unit/box 10 pcs. 400 x 300 mm art. no. 308 120 020 volume unit/box 10 pcs. 500 x 300 mm art. no. 308 130 010 volume unit/box 6 pcs. 500 x 400 mm art. no. 308 130 020 volume unit/box 6 pcs. 600 x 400 mm art. no. 308 140 010 volume unit/box 5 pcs. 600 x 500 mm art. no. 308 140 020 volume unit/box 4 pcs. 700 x 500 mm art. no. 308 150 010 volume unit/box 3 pcs.

TÜVNORD

tÜV certified for

sealant class d

31

Typ for folded spiral-seam tubes

art. no. 308 170 010 GRD 18-7 70 mm volume unit/box 50 pcs.art. no. 308 180 010 GRD 18-8 80 mm volume unit/box 50 pcs.art. no. 308 190 010 GRD 18-9 90 mm volume unit/box 50 pcs.art. no. 308 200 010 GRD 18-10 100 mm volume unit/box 50 pcs.art. no. 308 200 011 GRD 18-11 110 mm volume unit/box 50 pcs.art. no. 308 210 010 GRD 18-12 125 mm volume unit/box 50 pcs.art. no. 308 210 011 GRD 18-14 140 mm volume unit/box 50 pcs.art. no. 308 210 015 GRD 18-16 160 mm volume unit/box 50 pcs.

art. no. 308 220 010 GRD 21-14 + 15 140 mm + 150 mm volume unit/box 50 pcs.art. no. 308 230 010 GRD 21-16 + 18 160 mm + 180 mm volume unit/box 50 pcs.art. no. 308 240 010 GRD 21-20 + 22 200 mm + 224 mm volume unit/box 50 pcs.art. no. 308 250 010 GRD 21-25 + 28 250 mm + 280 mm volume unit/box 50 pcs.art. no. 308 260 010 GRD 21-31 + 35 315 mm + 355 mm volume unit/box 50 pcs.

art. no. 308 260 020 GRD 32-28 280 mm volume unit/box 25 pcs.art. no. 308 270 010 GRD 32-31 315 mm volume unit/box 25 pcs.art. no. 308 280 010 GRD 32-35 355 mm volume unit/box 25 pcs.art. no. 308 280 110 GRD 32-40 400 mm volume unit/box 25 pcs.art. no. 308 280 120 GRD 32-45 450 mm volume unit/box 25 pcs.art. no. 308 280 130 GRD 32-50 500 mm volume unit/box 25 pcs.

art. no. 308 290 010 GRD 43-40 400 mm volume unit/box 10 pcs.art. no. 308 300 010 GRD 43-45 450 mm volume unit/box 10 pcs.art. no. 308 310 010 GRD 43-50 500 mm volume unit/box 10 pcs.art. no. 308 320 010 GRD 43-56 560 mm volume unit/box 10 pcs.art. no. 308 330 010 GRD 43-63 630 mm volume unit/box 10 pcs.art. no. 308 340 010 GRD 43-71 710 mm volume unit/box 10 pcs.art. no. 308 350 010 GRD 43-80 800 mm volume unit/box 10 pcs.art. no. 308 360 010 GRD 43-90 900 mm volume unit/box 10 pcs.

art. no. 308 370 010 GRD 54-56 560 mm volume unit/box 6 pcs.art. no. 308 380 010 GRD 54-63 630 mm volume unit/box 6 pcs.art. no. 308 390 010 GRD 54-71 710 mm volume unit/box 6 pcs.art. no. 308 400 010 GRD 54-80 800 mm volume unit/box 6 pcs.art. no. 308 410 010 GRD 54-90 900 mm volume unit/box 6 pcs.art. no. 308 420 010 GRD 54-100 1000 mm volume unit/box 6 pcs.art. no. 308 430 010 GRD 54-112 1120 mm volume unit/box 6 pcs.art. no. 308 440 010 GRD 54-125 1250 mm volume unit/box 6 pcs.art. no. 308 450 010 GRD 54-140 1400 mm volume unit/box 6 pcs.art. no. 308 460 010 GRD 54-160 1600 mm volume unit/box 6 pcs.

art. no. 308 990 010 Edge protection, self-adhesive Rolls à 100 m

Available sizes:access doorsfor round and oval ductwork

Easy assembly thanks to 2-part structure. Fixed with two hand knobs.

Galvanized

edge protection

32

cLaMPS For SPIraL SeaM tuBeS

clamps for spiral seam tube

SMALL DETAILS LARGE IMPACT

• steel galvanized • 2-part screw fixed pipe clamp• with a welded on combination nut M8/M10• sound insulation enclosure inserted in a positive lock• EPDM quality for DIN 4109• insulation rubber, silicone and halogen free• temperature resistant - 30 °C to + 80 °C• quick and practice-oriented installation as a result of further opening angles• easy installation as a result of a click-in lock ø ≤ 400 mm• matches pipe tolerances well as a result of 2 locking screws

Nominal width ø mm Article no. Dimension

mmLocking screw mm

80 315 410 010 20 x 1,8 M6 x 20100 315 430 010 20 x 1,8 M6 x 20125 315 450 010 20 x 1,8 M6 x 20150 315 470 010 20 x 1,8 M6 x 20160 315 480 010 20 x 1,8 M6 x 20180 315 490 010 20 x 1,8 M6 x 20200 315 500 010 20 x 1,8 M6 x 20225 315 510 010 20 x 1,8 M6 x 20250 315 520 010 20 x 1,8 M6 x 20280 315 530 010 20 x 1,8 M6 x 20300 315 540 010 20 x 1,8 M6 x 20315 315 550 010 20 x 1,8 M6 x 20355 315 570 010 20 x 1,8 M6 x 20400 315 580 010 20 x 1,8 M6 x 20

For pipe ø mm Article no. Dimension

mmLocking screw mm

450 315 590 010 25 x 2,5 M10 x 25500 315 600 010 25 x 2,5 M10 x 25560 315 610 010 25 x 2,5 M10 x 25600 315 615 010 25 x 2,5 M10 x 25630 315 620 010 25 x 2,5 M10 x 25710 315 630 010 25 x 2,5 M10 x 25800 315 640 010 25 x 2,5 M10 x 25900 315 650 010 25 x 2,5 M10 x 25

1000 315 660 010 25 x 2,5 M10 x 25

1120 315 670 010 25 x 2,5 M10 x 251250 315 680 010 25 x 2,5 M10 x 25

1.

3.

2.

33

unIVerSaL aSSeMBLY SYSteM For SPIraL SeaM tuBeS

universal assembly system for spiral seam tubes

The system with a new assembly method and high cost savings! The mounting system for spiral pipes: diameter > 400 mm

Cut as follows Wrong Suspend here

34

1

2

3


Features • Universal application• Flexible suspension

Pipe diam. of spiral pipe Spacer/Pipe Length of

assembly beltLength of the insulation rubber

Pipe weight of the spiral pipe (approx.)

450 mm 30 mm 1550 mm 1350 mm 12.50 kg/m500 mm 30 mm 1700 mm 1500 mm 14.00 kg/m560 mm 35 mm 1880 mm 1680 mm 19.00 kg/m630 mm 45 mm 2090 mm 1890 mm 22.00 kg/m710 mm 50 mm 2390 mm 2130 mm 24.50 kg/m800 mm 55 mm 2660 mm 2400 mm 27.50 kg/m900 mm 60 mm 2990 mm 2700 mm 31.00 kg/m1000 mm 70 mm 3290 mm 3000 mm 35.00 kg/m

The proper function of the assembly system is only guaranteed when original parts are used!

Request our product samples with assembly instructions.

Holder with adjustment nutAdjustment and lock nut M 8, steel strip, galvanized Load max. 200 kg up to a 1000 mm diameter

Insulation rubber Dimensions 20 x 4.5 mm Temperature resistant: - 40 °C/+110 °C, ± 45 ° shore, ΔL = 22 dB (A)

art no. 315 800 010volume unit 100 pcs.

art no. 315 820 000volume unit/roll 10 m

art no. 315 810 010volume unit/roll 25 m

Assembly strip Galvanized steel strip 19 x 0.7 mm

• Height adjustment• Simple, quick and as a result, low-cost assembly

• Low stock levels and simple logistics • Sound insulation in accordance with DIN 4109

35


• Low stock levels and simple logistics • Sound insulation in accordance with DIN 4109

drILL ScreWS

drill screw - the clever screw

• Instead of a hexagon, now with an inner square in a shapely head • Ideal for pipe installation • No problems with shrinkage strips • Secure fit and a tight hold due to the toothed underside

• Holders are conically tapered • Non-magnetic, i.e. no drilling swarf on the holder • A holder is free and readily available with each box

Size Art. no. volume unit/box4.2 x 13 mm 317 010 020 1000 pcs.4.2 x 16 mm 317 020 020 1000 pcs.4.2 x 19 mm 317 030 020 1000 pcs.4.2 x 32 mm 317 035 020 500 pcs.

Screws (galvanized)

Size Art. no. volume unit/box4.2 x 13 mm 317 070 040 1000 pcs.4.2 x 16 mm 317 080 040 1000 pcs.

Screws (stainless steel 1.4301)

short art. no. 317 010 040long art. no. 317 020 040

Screwdriver

Q 2-50 art. no. 317 010 030

Holder (individual)

36

ModuLar VoLuMe controL daMPer SYSteM

Modular volume control damper system

JK-W-01-S (standard) JK-W-01-G (with lip seal)

Tested by RWTUV Essen

VARIABLE USETHROUGH A MODULAR SYSTEM

37

VoLuMe controL daMPer [Standard]

Modular volume control damper system

JK-W-01-S (standard) The new ventilation louvre system from GEBHARDT-STAHL opens up a modular system with variable applications. Through the new driving mechanism which is achie-ved using aluminium cog wheels, the new ventilati-on louvre system from GEBHARDT-STAHL provides you with higher breaking resistance, no wear and as such, a long service life.

• Good flow characteristics as a result of a contra effect • Aluminium cog wheels, used both inside and outside the unit • Temperature resistance up to 80 °C with special plastic parts (on a short term basis, up to 180 °C) • Continuous screw ensures high stability

Installation instructions • In each case, the ‘arrows’ indicated on the cog wheels must point in the same direction on one side. When arranging the cog wheels on both sides, maintain the direction of the arrow. • In the case of units greater than a 12 lamellae drive, the equipment features double-sided cog wheels, a second drive axle and connecting rods (see accessories). • With sizes greater than 1200 x 1200 mm, frame reinforcement is achieved using a threaded rod. • Secure the drive axle with screws or rivets.• Only use L bearing caps for the left hand side and R bearing caps for the right hand side.

Request our separately available assembly instructions!

e.g. exterior cog wheels

38

VoLuMe controL daMPer [WItH a LIP SeaL]

JK-W-01-G (with a lip seal) JK-W-01-G maximum temperature resistance 80 °C. Seal tested in accordance with DIN EN 1751 Class 2, TÜV test dated 09/99, RWTÜV, Essen.

Installation instructions• See type JK-W-01-S, in addition: • The lip seal must be inserted free of stress • Provide the stopper with a seal • Apply a silicone-free sealing compound to the frame using an injection technique

denSer

and QuIeter

39

art. no. 320 400 011 lamella aluminium type ‘W-01-S’ standard design, 50 m bundles

art. no. 320 400 010 lamella aluminium type ‘W-01-G’ with a retainer for rubber seals, 50 m bundles

art. no. 320 400 020 aluminium cog wheel for type ‘W-01’ box of 100 pieces

art. no. 320 400 040 bearing caps (L), black, 100 pieces per bag

art. no. 320 400 050 bearing caps (R), black, 100 pieces per bag

art. no. 320 400 060 end cap, black, 100 pieces per bag

art. no. 320 400 070 hexagonal bearing part, black, 100 pieces per bag

art. no. 320 400 030 side part, galvanized 1.2 mm. 175 mm wide, 3,000 mm long, with a hexagonal hole, 44 mm for lamella type ‘W-01’

art. no. 317 035 020 4.2 x 32 mm self-tapping screw, box of 500 pieces

art. no. 320 370 010 drive axle 10 x 10 mm, length 150 mm, box of 50 pieces

art. no. 320 400 080 rubber seals for aluminium lamella ‘W-01-G’

art. no. 320 190 010 stopper seal rubber profile 100 m rolls (only for type W-01-G)

Modular volume control damper

art. no. 320 100 020 ball joint M 8 for hand lever

art. no. 320 300 000 hand locking lever for drive axle, 10 x 10 mm, with a locking device, box of 10 pieces

art. no. 320 100 010 manual locking lever for ajalousie louvre (star shaped holes)

art. no. 314 130 010 threaded rod M 8 x 1 m bundles - each 50 pieces

accessories

Plastic parts, resistant to 180 °C (short term), on request

components

40

30

30

15

30

15

30

30

15

50

50

40

88

27

27

88

27

27

88

27

27

46

46

127

aLuMInIuM ProFILeS and acceSSorIeS For aIr-HandLIng unItS

aluminium profiles for air-handling units

Available in stock in lengths of 5 m and bundles of 100 m, available in aluminium

AK 30 thickness 1.4 mmart. no. 301 020 570

AVK 30 thickness 1.4 mmart. no. 301 020 670

AK 50 thickness 1.6 mmart. no. 301 020 770

AK 25/30 thickness 1.4 mmart. no. 301 020 870

KE 30 KVE 30 KE 50 KE 25/30art. no. 302 050 000 art. no. 302 060 000 art. no. 302 070 000 art. no. 302 080 000

volume unit/box 120 pcs. 100 pcs. 35 pcs. 120 pcs.

locking handle locking handle KS 25 (AK 50 + AK 25/30)art. no. 302 900 010 art. no. 302 900 110

Locking handle KS15 for AK30Consisting of: a striking plate, lock cylinder (short), counter nut, hexagonal screw M 5, EPDM seal

Locking handle KS25 for AK50 and AK25/30Consisting of: a striking plate, lock cylinder (long), counter nut, hexagonal screw M 5, EPDM seal

accessories

Key for the locking handleart. no. 302 900 020

Available in plastic

41

WeatHer LouVre (SeLF-aSSeMBLY kIt)

Weather louvre (self-assembly kit)

• Variable connector system • High level of stability • Low installation costs • Free cross section approx. 55% • Lamella holder can also be used as a central bar • Louvre insert can also be used without the frame in ducts or equipment

corner piece

frame (without studs)

lamella

Weather louvre

lamella holder

Flange 40 mm

Frame section

Lamella section

42

66,8 mm

62 mm40 mm

16

80 mm

38 mm

WeatHer LouVre (SeLF-aSSeMBLY kIt)

LamellaAvailable in stock in lengths of 5 m and bundles of 125 m

galvanized art. no. 304 030 010stainless steel art. no. 304 030 040aluminium art. no. 304 030 070

Frame with studs Available in stock in lengths of 5 m and bundles of 100 m

galvanized (with studs) art. no. 304 040 010galvanized (without studs) art. no. 304 040 011stainless steel art. no. 304 040 040aluminium art. no. 304 040 070

Corner piecesvolume unit/box = 250 pcs.

galvanized art. no. 304 050 010stainless steel art. no. 304 050 040aluminium art. no. 304 050 070

Lamella holder punched Available in stock in lengths of 2.5 m volume unit = 20 pieces

galvanized art. no. 304 040 020

PrePuncHed

no edgeS

43

PneuMatIc PuncH PreSS

Pneumatic punch press

The pneumatic punch press is used for quickly connec-tions of flanges and corners in just 2-3 seconds. The screwed superstructure only requires a com-pressed air connection and ensures many years of fault-free use. The turnkey pneumatic drive allows you to be free of electrical connections.

Using time-controlled pneumatic components, the punching process is triggered without a footswitch. The patented tool holder allows the punching of 20, 30 and 40 model frames after the shortest of setting times with only one tool (no conversion necessary)!

Capacity: 4.0 t Prerequisite compressed air: 6 bar

Dimensions:depth: 400 mmwidth: 400 mm height: 600 mmweight: 68 kg

For proper operation of the punch press a compressor is required with the following specifications:

1.5 HP 220 volt 50 hertz 7.5 amps 8.0 bar 6 litres (210 litres per minute)

Pneumatic punch press

art. no. 350 101 000

44

Index

301 010 010 P 20 – galvanized p. 11

301 010 340 P 20 – stainless steel 4301 p. 11

301 010 375 P 20 – aluminium p. 11

301 010 500 S 20 – galvanized p. 14

301 010 504 S 20 – galvanized, OPEN p. 14

301 020 010 P 30 – galvanized p. 11


301 020 475 P 30 – aluminium p. 11

301 020 500 S 30 – galvanized p. 14

301 020 504 S 30 – galvanized, OPEN p. 14

301 020 570 aluminium box sections AK 30 p. 40

301 020 670 aluminium box sections AVK 30 p. 40

301 020 770 aluminium box sections AK 50 p. 40

301 020 870 aluminium box sections AK 25/30 p. 40

301 030 610 P 40 – galvanized p. 9/11

301 030 651 S 40 – stainless steel p. 14

301 030 652 S 40 – galvanized p. 14

301 030 656 P 40 C – galvanized p. 9



301 050 311 P 20 C – galvanized p. 9

301 050 402 Premium 20 D – galvanized p. 7

301 050 403 PR 20 p. 14

301 050 411 P 30 C – galvanized p. 9

301 050 502 Premium 30 D – galvanized p. 7

301 050 503 PR 30 p. 14

301 500 010 L 20 – galvanized p. 16

301 500 040 L 20 – stainless steel 4301 p. 16

301 520 010 L 30 – galvanized p. 16

301 520 040 L 30 – stainless steel 4301 p. 16

302 010 010 P 20/3 – galvanized p. 7/9/12/15

302 010 015 P 20/3 V – galvanized p. 7/12/15

302 010 019 P 20/3 VH – galvanized p. 15

302 010 020 P 20/3 K – galvanized p. 12/15

302 010 040 P 20/3 V – stainless steel 4404 p. 12

302 010 070 P 20/3 – aluminium p. 12

302 010 340 P 20/3 – stainless steel 4301 p. 12

302 010 341 P 20/3 V – stainless steel 4301 p. 12

302 020 010 D 20/3 – galvanized p. 12/15

302 050 000 corner connector KE 30 p. 40

302 050 010 P 30/4 – galvanized p. 9/12

302 050 040 P 30/V – stainless steel 4404 p. 12

302 050 070 P 30/4 – aluminium p. 12


302 050 500 S 30/4 – galvanized p. 7/15

302 060 000 Longitudinal connector KVE 30 p. 40

302 060 010 D 30/4 – galvanized p. 12

302 070 000 connector corner KE 50 p. 40

302 080 000 connector corner KE 25/30 p. 40

302 080 010 P 40/4 – galvanized p. 9/12/15


302 090 010 SD 30/V – galvanized p. 15

302 220 010 P 20/3 L – galvanized p. 12/15

302 220 015 P 20/3 LV – galvanized p. 12/15

302 500 010 L 20/3 K – galvanized p. 16

302 500 040 L 20/3 K – stainless steel 4301 p. 16

302 510 010 L 20/3 L – galvanized p. 16

302 520 010 L 30/4 – galvanized p. 16

302 520 040 L 30/4 – stainless steel 4301 p. 16

302 540 010 L 30/V – galvanized p. 16

302 550 010 P 30/V – galvanized p. 12

302 550 015 P 30/V – stainless steel 4301 p. 12

302 550 500 S 30/3 – galvanized p. 7/15

302 550 519 S 30/3 H – galvanized p. 15

302 900 010 locking handle KS 15 for AK 30 p. 40

302 900 020 VKS key for locking handle p. 40

302 900 110 locking handle KS 25 for AK 50 and AK 25/30 p. 40

45

303 010 010 cleat P-system galvanized p. 17

303 010 040 cleat P-system stainless steel 4404 p. 17

303 010 500 cleat S system galvanized p. 17

303 021 011 clamp, galvanized, mounted screw p. 17

303 021 012 clamp "plus", galvanized, mounted screw p. 15

303 021 040 clamp, stainless steel, mounted p. 15

303 500 010 L cleat, galvanized p. 17

304 030 010 lamella, galvanized p. 42

304 030 040 lamella, stainless steel p. 42

304 030 070 lamella, aluminium p. 42

304 040 010 frame, galvanized - with studs p. 42

304 040 011 frame, galvanized - without studs p. 42

304 040 020 lamella holder - galvanized p. 42

304 040 040 frame - stainless steel p. 42

304 040 070 frame - aluminium p. 42

304 050 010 corner piece - galvanized p. 42

304 050 040 corner piece - stainless steel p. 42

304 050 070 corner piece - aluminium p. 42

305 020 010 support section T 20, 5 m p. 20






305 110 000 insulation rubber p. 20

305 210 000 protective cap for T 20 (30 x 20), black p. 20



306 010 010 sheet metal fastener (small), loose seal p. 18

306 020 010 sheet metal fastener (large), loose seal p. 18

306 030 010 sheet metal fastener (small), mounted seal p. 18

306 040 010 sheet metal fastener (large), mounted seal p. 18

306 050 010 sheet metal fastener-PLUS p. 18

306 200 010 reinforcing profile p. 18

306 200 020 T-profile p. 23

307 010 010 damper quadrants 1 p. 28

307 020 010 damper quadrants 2/3 p. 28




308 010 010 access doors with edge protection 200 x 100 mm

p. 30

308 020 010 access doors with edge protection300 x 200 mm p. 30

308 030 010 access doors with edge protection 400 x 300 mm p. 30



308 100 010 180 x 80 mm access doors p. 30











308 170 010 access doors type GRD 18-7 p. 31








308 220 010 access doors type GRD 21-14 +15 p. 28

308 230 010 access doors type GRD 21-16 +18 p. 28

308 240 010 access doors type GRD 21–20+22 p. 28



308 260 020 access doors type GRD 32–28 p. 31






















308 990 010 Edge protection, self-adhesive p. 30/31


309 010 010 flexible connectors, polyester PVC45/60/45 p. 24

309 010 040 flexible connectors, polyester PVC stainless steel 45/60/45 p. 24

309 020 010flexible connectors, polyester PVC 65/95/65 p. 24

309 030 010 flexible connectors, fibreglass/neoprene 45/60/45 p. 24

309 040 010 flexible connectors, fibreglass/neoprene 65/95/65 p. 24

309 050 010 flexible connectors, fibreglass/aluminium 45/60/45 p. 24

309 060 010 flexible connectors, fibreglass/aluminium 65/95/65 p. 24

309 070 000 flexible strip 150 mm PVC p. 24

309 080 000 flexible strip 200 mm PVC p. 24

309 090 000 flexible strip, 1000 mm, PVC p. 24

309 100 000 flexible strip, various widths, PVC p. 24

46

Index

313 070 020 plate, hole 10.5 mm p. 23

313 070 030 plate, hole 6.5 mm p. 23

313 070 040 plate, hole 6.5 mm, stainless steel p. 23

313 110 010 single support angle, galvanized, complete p. 22

313 110 020 single support angle, galvanized, heavy duty p. 22

313 120 010 double support angle, galvanized, complete p. 20

313 130 010 tube hanger bracket, complete p. 22

313 200 000 polyethylene clamp p. 23

313 200 010 galv. welded threaded pipe DIN 2440 p. 23

313 200 012 pipe 16 x 2 mm p. 23

313 210 010 Fischer-dowel M 6 with a metric thread p. 23

313 210 012 EMBY-Fix p. 23

313 210 020 hexagon screw DIN 931 - 8.8 p. 23

313 500 010 slide mount p. 19

313 508 000 insulating elements with washer p. 22

314 110 010 galvanized threaded rods. 1 m M 6 p. 21


314 130 010 galvanized threaded rods. 1 m M 8 p. 21/39






314 190 010 connector bushings M 6 x 25 round p. 21




314 230 010 connector bushings M 6 x 25 hexagonal p. 21




315 010 010 perforated strip 17 x 0.6 mm (hole = 6.5 mm) p. 21

315 020 010 perforated strip 25 x 0.8 mm (hole = 8.5 mm) p. 21

315 410 010 galvanized pipe clamp, 80 mm with rubber p. 32



309 110 010 flexible connectors, polyester/PVC 45/120/45, 25 m p. 24

309 110 020 flexible connectors, polyester/PVC 45/120/45, 50 m p. 24

309 210 000 flexible strip 150 mm, fibreglass/neoprene p. 24



309 240 000 flexible strip, various widths, fibreglass/neoprene p. 24

309 310 000 flexible strip, 150 mm, fibreglass p. 24



309 340 000 flexible strips, various widths, fibreglass p. 24

309 410 000 PVC glue p. 26

309 420 000 zinc spray, 400 ml p. 27

309 420 040 stainless steel Spray, 400 ml p. 27

309 420 070 aluminium spray, 400 ml p. 27

310 010 000 sealing tape 9 x 4 mm with a backing film, 10 m p. 26



310 070 000 sealing tape 15 x 4 mm without a backing film, 10 m p. 26




311 030 010 Gebhardt Plast 310 ml p. 25

311 030 011 Gebhardt Plast 600 ml p. 25

311 030 015 Bucket, each at 5 kg p. 25

311 089 000 Sealing Pad p. 18

311 090 010 hand-pressure gun for 310 ml cartridges p. 26

313 070 010 plate, hole 8.5 mm p. 23

47

Index

315 470 010 galvanized pipe clamp,150 mm with rubber p. 32

315 480 010 galvanized pipe clamp, 160 mm rubber p. 32





















315 800 010 holder with adjustment nut for UMW p. 34

315 810 010 assembly strip 19 x 0.7 mm for UMW p. 34

315 820 000 insulation rubber 20 x 4.5 mm p. 34

317 010 020 drill screw 4.2 x 13 mm p. 35

317 010 030 individual holders Q 2 - 50 for self-tapping screws p. 35

317 010 040 short screwdriver p. 35

317 020 020 drill screw 4.2 x 16 mm p. 35

317 020 040 long screwdriver p. 35

317 030 020 drill screw 4.2 x 19 mm p. 35

317 035 020 drill screw 4.2 x 32 mm p. 35/39

317 070 040 drill screw 4.2 x 13 mm ‘stainless steel 1.4301’ p. 35

317 080 040 drill screw 4.2 x 16 mm ‘stainless steel 1.4301’ p. 35

320 100 010 hand lever for jalousie louvre p. 39

320 100 020 ball joint M 8 for a hand lever p. 39

320 190 010 stopper seal rubber profile p. 39

320 300 000 hand locking lever for drive axle p. 39

320 370 010 drive axle 10 x 10 mm, length 150 mm p. 39

320 400 010 lamella, aluminium type ‘W-01-G’ with holder for sealing rubber p. 39

320 400 011 lamella, aluminium type ‘W-01-S’ standard version p. 39

320 400 020 aluminium cog wheel for type ‘W-01’ p. 39

320 400 030 side part, galvanized, for lamella ‘W-01’ p. 39

320 400 040 bearing cap (L), black p. 39

320 400 050 bearing cap (R), black p. 39

320 400 060 end cap, black p. 39

320 400 070 bearing part hexagonal, black p. 39

320 400 080 rubber seals for aluminium lamella ‘W-01-G’ p. 39

350 101 000 pneumatic punch press p. 43

Copyright 2013 by Gebhardt-Stahl GmbH

All rights reserved. The adoption of texts and photographs

without the express, prior consent of Gebhardt-Stahl GmbH

is strictly prohibited. Unless stated otherwise, all trademarks

in this catalogue are trademarks in favour of Gebhardt-Stahl

GmbH. This especially applies to brand names, type designa-

tions, logos and emblems.

Günzburg

Dommershausen

Werl

St. Gallen

Klagenfurt

Stare Miasto

administration, production and warehousing Werl, GermanyStare Miasto, Poland

Production and warehousingDommershausen, Germany

distribution warehouses Günzburg, Germany Frankfurt a.d. Oder, Germany St. Gallen, Switzerland Klagenfurt, Austria

Your contacts Werner Wenzlokat · Tel +49 2922 [email protected]

Meinolf Schweins · Tel +49 2922 [email protected]

Birgit Possmeier-Schulz · Tel +49 2922 [email protected]

Sabrina Ramm · Tel +49 2922 9733-212 [email protected]

our SIteS

Frankfurta.d. Oder

Stat

us: 0

3/20

13

Gebhardt-Stahl GmbHRuntestraße 33D-59457 WerlTel. +49 2922 9733-0Fax +49 2922 [email protected]

Product range - SectIonS and acceSSorIeS For tecHnIcaL … · Product range - SectIonS and...

Documents

Transcript of Product range - SectIonS and acceSSorIeS For tecHnIcaL … · Product range - SectIonS and...