Product Price List - hatcontract.com · UL / GREENGUARD GOLD Certified HAT bases have been tested...
Transcript of Product Price List - hatcontract.com · UL / GREENGUARD GOLD Certified HAT bases have been tested...
Dynamic Solutions forthe Open Workplace
ProductPrice ListDecember 2019
What’s new? Monitor Arms can now be added to a HAT Contract PO
www.hatcontract.com v.1.54
Effective July 1, 2019, all orders placed with HAT Contract will incur 5% tariff on monitor arms and 3.5% tariff on all other products.
December 9 2019 | v. 1.542
December 9 2019 | v. 1.54 3
PricesAll prices are list prices and are subject to change without notice. The prices in effect at the time of shipment will prevail. Possession of this price list or any other literature shall not imply the company’s willingness to sell to the holder and shall not be construed as a direct offer of sale.
Payment TermsWith approved credit, terms are 1% 10 days, Net 30 days from date of invoice. Past due accounts are subject to interest at the maximum rate permitted by law.
DesignThe right is reserved by HAT Contract to make changes in design and material, as well as discontinuance of parts and units when such action is deemed to be an improvement in design, function and/or construction.
To OrderSpecify model number, quantity, finish and all other applicable information. Orders will be acknowledged with a HAT Contract order acknowledgment form. In the event that an error is made in the production of your product, our acknowledgment will be used as the resolution document.
PackagingMost products ship KD and require assembly.
Change OrdersOrders which have entered any stage of production may not be changed. All changes on customer orders previously acknowledged must be requested in writing and are subject to approval. Requests for changes are not accepted until acknowledged by HAT Contract. In the event revision is accepted, change fees may apply.
UL / GREENGUARD GOLD CertifiedHAT bases have been tested and meet all indoor air quality standards for VOC emissions.
UL 962 / CE / TUV MarkingsHAT bases meet UL testing standards.
ANSI/BIFMAHAT Contract products within this price list generally meet or exceed applicable BIFMA and ANSI standards.
LEED CREDITSHAT bases qualify for a variety of LEED credits. (See www.hatcontract.com)
Cancellations and ReturnsOrders already in production may not be cancelled unless pre-authorized in writing by HAT Contract. Charges may be incurred for the entire amount of the order.
Authorized merchandise returns must be approved prior to the arrival of any goods at our dock. Returns are subject to a 15% restocking fee plus return freight charges. Product must be returned in original cartons in “as new” condition.
Unauthorized returns will not be accepted by HAT Contract.
Claim PolicyIt is the purchaser’s responsibility to examine goods upon receipt and to notify HAT Contract’s customer service with any concerns. Any claims against HAT Contract for apparent defects, errors or shortages must be made by the purchaser within five (5) working days after any delivery. Failure by the purchaser to make any claim against HAT Contract within (5) days shall constitute acceptance of the goods and waiver of any apparent defects, errors or shortages.
TERMS & CONDITIONS
December 9 2019 | v. 1.544
TERMS & CONDITIONS
Freight DamageHAT Contract is not responsible for damage that occurred in transit or during storage. Before accepting a shipment from the carrier customer should carefully review the packing list and inspect the quantity and condition of the items. For any external damage, the customer should document all damage on the Bill of Lading and request a carrier inspection of the product.
Concealed damage must be reported to the Carrier and HAT Contract in writing, within 48 hours of delivery. In the event of damage, customer shall accept the order and contact Customer Service for issue resolution. We will take all reasonable measures to assist customers in resolving claims for loss or damage.
Freight TermsProducts are shipped F.O.B. shipping point with freight costs and handling fees prepaid (unless other shippingarrangements have been made). See Freight Zone Map for more information. Freight is prepaid to Port of Seattle for shipments to Alaska. Freight is prepaid to Port of Oakland for shipments to Hawaii. Orders under $1,500.00 net will have a freight surcharge. *Please note monitor arms have a separate freight surcharge
HAT Contract reserves the right to charge the customer for non-standard customer delivery requirements. These may include special requests for lift gates, appointment delivery, residential delivery, inside delivery, etc. For information concerning these charges, please contact Customer Service.
RoutingStandard courier shipments are made via common carrier, unless otherwise specified by customer. Special routingrequests made by the customer may result in additional charges to the purchaser.
All LTL/full-trailer shipments are dock-to-dock & are scheduled to depart Monday through Friday between 7AM and 2PM.
HAT Contract shipments are not guaranteed. Should you require guaranteed service please contact Customer Service. We will work to arrange a specific delivery timetable with the carrier, charges may apply.
Will Call orders will have a confirmed pick up date. Customers will have three (3) business days from notification to pick up their order. If the order is not picked up within this time frame, storage charges may apply.
National Landed Freight*available in the 48 domestic states
Contact Information Phone Numbers: Website: www.hatcontract.comHAT Contract, LLC. Office: 408.437.8770 Customer Service: [email protected] Martin Avenue Toll Free: 888.226.7685 Order Entry: [email protected] Clara, CA 95050 Fax: 408.437.8773 Warranty Claims: [email protected]
December 9 2019 | v. 1.54 5
TERMS & CONDITIONS
Warranty
HAT Bases: • frames are warranted for their lifetime. • electrical and mechanical components are warranted for 7 years.Pedestals are warranted for their lifetimePedestal Cushions are warranted for 2 years.Work Surfaces & Dividers are warranted for 5 years. • Work Surface & Divider exclusions include: normal wear and tear, which are to be expected over the course of ownership; damage caused by abuse, misuse, neglect, vandalism, accident, disaster, improper storage, chemical damage, water or fire; damage caused by the carrier in-transit, which will be handled as claims against the carrier; modifications or attachments to the product that are not approved by the Company or use of a product in combination with products or equipment not appropriate for that product; products that were not installed, used or maintained in accordance with product instructions and warnings; causes external to a product such as use of improper cleaning supplies or environmental factors; products which have been modified or altered, repaired or refurbished by someone other than the company.Keyboard trays: • mechanism is warranted for 5 years • wrist rest is warranted for 1 year • The company will repair or replace, at its option, without charge to the original purchaser only, defective products or parts from normal use. Monitor Arms are warranted for 10 years Pre-approved labor and service costs are covered under this warranty.
This warranty shall be effective for the applicable time period starting from date of purchase as shown on your original receipt or other proof of purchase. This warranty is your sole remedy for product defects and excludes defects due to or arising in connection with product abuse or misuse, user modification of, or attachments to the product, including application of your own materials and productsor parts not used, maintained or installed in accordance with the company’s installation, maintenance and/or applicable guidelines.
Normal use consists of a 5 day, 40 hour work week.
There are no other warranties, expressed or implied, other than those specifically described, including without limitation any implied warranty or merchantability or of fitness for a particular purpose. We will not be responsible for incidental or consequential damages. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitations or exclusions maynot apply to you. This warranty gives you specific legal rights and you may have other rights which vary from state to state.
If your product fails during normal use within the applicable warranty period, please contact [email protected], with adescription of the relevant part, together with proof of purchase of the product.
HAT Power & Data Beam / HAT Benching Warranty
HAT Contract warrants that all beam related products will be free from defects in its material and workmanship, as described below, foras long as the original purchaser owns the product. All benching related products are warranted for their lifetime on the frame and 7years on electrical and mechanical components. The company will repair or replace, at its option, without charge to the originalpurchaser only, defective products or parts from normal use. Pre-approved labor and service costs are covered under this warranty.
This warranty shall be effective for the applicable time period starting from date of purchase as shown on your original receipt or otherproof of purchase. This warranty is your sole remedy for product defects and excludes defects due to or arising in connection withproduct abuse or misuse, user modification of, or attachments to the product, including application of your own materials and productsor parts not used, maintained or installed in accordance with the company’s installation, maintenance and/or applicable guidelines.
Normal use consists of a 5 day, 40 hour work week.
There are no other warranties, expressed or implied, other than those specifically described, including without limitation any impliedwarranty or merchantability or of fitness for a particular purpose. We will not be responsible for incidental or consequential damages.Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitations or exclusions maynot apply to you. This warranty gives you specific legal rights and you may have other rights which vary from state to state.
If your product fails during normal use within the applicable warranty period, please contact [email protected], with adescription of the relevant part, together with proof of purchase of the product.
December 9 2019 | v. 1.546
Worksurface Laminates
MM Manitoba Maple
FC Fawn Cypress
DW Designer White
PW Pinnacle Walnut
104 Black
124 Silver
248 White
Monitor Arm Finishes
HCIndustrial Steel Matte*Special order only
DM Industrial Steel Antique *Special order only
IN STOCK PROGRAM
• In stock products ship in three days or less• In stock products include: • Power and Data Beams • Benching • Height Adjustable Bases • Mobile Pedestals • Dividers *limited skus and finishes (see page 13 and 17) • Worksurfaces *limited skus and finishes (see page 26) • Envoy Monitor Arms • Accessories - Power/data module - Wire Management Sleeve - Casters - Cable Mangement Tray
*For more information, please contact your sales representative.
BKBlack
SISilver
WHWhite
Base Finishes
FINISHES & LAMINATES
December 9 2019 | v. 1.54 7
FABRICS & LAMINATES
Elements Line (Grade 1 Fabric)
Made to Order Divider OptionsPET EchoScape
Ash Charcoal Cobalt Pear
SlateSandstone
F101 Gaia
F102 Euro
F103 Mikan
F104 Poppy
F112 Arundel
F108Sodalite
PET EchoScapeAsh
PET EchoScapeSlate
Fabric FoldHY-9910 Light Grey
Fabric FoldHY 9911 Dark Grey
In Stock Divider Options
F113Stately
F114Sapphire
F120Steel
F121 Iron
F122 Basalt
F123 Jet
Linen Iced Grey
December 9 2019 | v. 1.548
Fusion Line (Grade 2 Fabric)
F210Barley
F211 Sable
F212 Java
F213Lemongrass
F214Rinse
F215 Radiant
F216 Tyrian
F217Hyacinth
F218 Capri
F219Aster
F220Beyond
F221 Stucco
F222 Aluminum
F223Dove
F224Links
F225Atoll
F226Maize
F227 Papaya
F228 Macintosh
F229Berry
F230Gull
F231Pewter
FABRICS & LAMINATES
December 9 2019 | v. 1.54 9
FABRICS & LAMINATES
Pedestal Cushion Fabrics
15-03Sapphire
15-04Poppy
15-07Mica
15-08Salmon
15-11Garnet
15-13Charcoal
15-15Meadow
15-16Mauve
15-17Taupe
15-18Fern
15-19Teal
15-21Black
15-41Sodalite
15-44Blue
15-48Iron
15-49Seafoam
15-75Orange
15-102Rust
15-104Yellow
15-106Khaki
15-109Brown
15-110Lilac
15-118Frost Green
15-153Denim
15-155Mustard
15-161Blue Green
15-164Fez
15-167Midnight
15-173Sapphire
15-184Purple
December 9 2019 | v. 1.5410
HAT TABLE & BASE SPECIFICATIONS
• Electric height adjustable table base (2 Legs)• Exclusive, easy to assemble, folding frame design• Expandable width frame (S: 24”- 41”, L: 42”- 74”)• 2 stage legs adjust from 27.25”- 46.75” (frame height)• LED 4 position programmable handset• Dual sync motors / 300 lb lift capacity (including top)• Cable manager included• Anti collision safety function• UL, CE, TUV and GREENGUARD GOLD Certified• Qualifies for LEED credits• Raises at 1.2” per second
Description for 2 Stage Leg Unit (2 Legs)Mid HAT Base • 2 Legs • 2 Stage
Specifications
HI HAT Base • 2 Legs • 3 Stage
• Electric height adjustable table base (3 Legs)• Exclusive, easy to assemble, folding frame design• Expandable width frame (S: 24”- 41”, L: 42”- 74”)• 3 stage legs adjust from 23.75”- 49” (frame height)• LED 4 position programmable handset• Dual sync motors / 300 lb lift capacity (including top)• Cable manager included• Anti collision safety function• UL, CE, TUV and GREENGUARD GOLD Certified• Qualifies for LEED credits• Raises at 1.5” per second
Description for 3 Stage Leg Unit (2 Legs)
L Unit HAT Base • 3 Legs • 3 Stage
• Electric height adjustable table base (3 Legs)• Exclusive, easy to assemble, folding frame design• Expandable width frame (L: 42”- 74”)• 3 stage legs adjust from 23.75”- 49” (frame height)• LED 4 position programmable handset• Tri sync motors / 350 lb lift capacity (including top)• Cable manager included• Anti collision safety function• UL, CE, TUV and GREENGUARD GOLD Certified• Qualifies for LEED credits• Raises at 1.5” per second
Description for 3 Stage Leg Unit (3 Legs)
Conference Table Base • 4 Legs • 2 Stage
• Electric height adjustable table base (4 Legs)• Exclusive, easy to assemble, folding frame design• Expandable width frame (42”- 74”)• 2 stage legs adjust from 27.25”- 46.75” (frame height)• LED 4 position programmable handset• Quad sync motors / 350 lb lift capacity (including top)• Cable manager included• Anti collision safety function• UL, CE, TUV and GREENGUARD GOLD Certified• Qualifies for LEED credits• Raises at 1.2” per second
Description for 2 Stage Leg Unit (4 Legs)
December 9 2019 | v. 1.54 11
HEIGHT ADJUSTABLE BASESELECTRIC • SIT-TO-STAND • FOLDING FRAMEHI HAT BASE • 23” - 49” • 3 STAGE LEG
Model Number Top Size Recommended(Specify Finish: SI, WH, BK, *DM, *HC) Width Depth Weight List Price Rectangular • 2 Legs SUHAT-HI-S-_ _ 28”-45” 24”-30” 70 lbs $1,119.00
SUHAT-HI-L-_ _ 46”-96” 24”-30” 74 lbs $1,119.00
Corner Unit • 2 Legs SUHAT-HI-S-_ _ 36”- 48”/36”- 48” 24”-30” 70 lbs $1,119.00
120 Degree Unit • 2 Legs SUHAT-HI-S-_ _ 36”- 48”/36”- 48” 24”-30” 70 lbs $1,119.00
Note: For corner units over 48” wide use the LUHAT-HI-L 3 Leg Base(See L-Unit section below)
Note: For 120 Degree corner units over 48” wide order the LUHAT-HI-L 3 Leg Base(See L-Unit section below)
L Unit • 3 Legs LUHAT-HI-L-_ _ 48”- 84”/48”- 84” 24”-30” 100 lbs $1,679.00
Notes:• This 3 leg bage adjusts for multiple sizes of L-shaped units• This 3 leg base cannot be used with a 3-piece top• This 3 leg base is used for 120 Degree corner units over 48” wide
Example:
PLEASE SPECIFY COLOR: Add code to end of model number. SI = Silver, WH = White, BK = BlackDM = Industrial Steel Antique, HC = Industrial Steel Matte *DM and HC are special order only
Example: SUHAT-HI-S-SINotes:• See page 8 for table frame specifications• Work Surfaces not included• Stocked in silver, white, black• Custom color match available - standard lead times apply
December 9 2019 | v. 1.5412
HEIGHT ADJUSTABLE BASESELECTRIC • SIT-TO-STAND • FOLDING FRAMEMID HAT BASE • 27.25” - 46.75” • 2 STAGE LEG
Model Number Top Size Recommended(Specify Finish: SI, WH, BK ,*DM, *HC) Width Depth Weight List Price Rectangular • 2 Legs SUHAT-MID-S-_ _ 28”-45” 24”-30” 64 lbs $989.00
SUHAT-MID-L-_ _ 46”-96” 24”-30” 68 lbs $989.00
Corner Unit • 2 Legs SUHAT-MID-S-_ _ 36”- 48”/36”- 48” 24”-30” 64 lbs $989.00
120 Degree Unit • 2 Legs SUHAT-MID-S-_ _ 36”- 48”/36”- 48” 24”-30” 70 lbs $989.00
Note: For corner units over 48” wide use the LUHAT-HI-L 3 Leg Base(See L-Unit section on page 6)
Note: For 120 Degree corner units over 48” wide order the LUHAT-HI-L 3 Leg Base(See L-Unit section on page 6)
Conference Table Base • 4 Legs CONHAT-MID-L-_ _ 72”-120” 42”-60” 110 lbs $1,899.00
Notes:• Ships without feet, includes adjustable glides• STOCKED ONLY IN BLACK
PLEASE SPECIFY COLOR: Add code to end of model number. SI = Silver, WH = White, BK = BlackDM = Industrial Steel Antique, HC = Industrial Steel Matte *DM and HC are special order only
Example: SUHAT-MID-S-SINotes:• See page 10 for table frame specifications• Work Surfaces not included• Stocked in silver, white, black• Custom color match available - standard lead times apply
December 9 2019 | v. 1.54 13
SURFACE MOUNTED DIVIDERS - IN STOCK
Model Number H W List Price
PET Dividers EDDI-PET-4818-_ _S 18” 48” $273.00(Surface Mounted) EDDI-PET-6018-_ _S 18” 60” $317.00In Stock EDDI-PET-4824-_ _S 24” 48” $310.00 EDDI-PET-6024-_ _S 24” 60” $375.00
Description:• Tackable PET Divider .75” thick, radius corners• .90 NRC rating• Made from 60% post consumer recyled PE plastic water bottles• VOC free• 100% recyclable polyester fiber• Easily clamps onto surfaces 3/4” - 1-7/8”• Mounting hardware included (silver finish)• Orders over 50, please check stock
Notes:• Specifiy color - “Ash” (SP-18) or “Slate” (SP-33)
Fabric Fold Dividier FDDI-FF-4818-_ _S 18” 48” $377.00(Surface Mounted) FDDI-FF-6018-_ _S 18” 60” $495.00In Stock FDDI-FF-4824-_ _S 24” 48” $454.00 FDDI-FF-6024-_ _S 24” 60” $590.00
Description:• Tackable fabric, 7/8” thick, radius corners• .30 NRC rating• Easily clamps onto surfaces 3/4” - 1-7/8”• Mounting hardware included (silver finish)• Orders over 50, please check stock
Notes:• Specifiy color - “Light Grey” (HY-9910) or “Dark Grey” (HY-9911)
Model Number Top Size Recommended(Specify Finish: SI, WH, BK ,*DM, *HC) Width Depth Weight List Price
December 9 2019 | v. 1.5414
Model Number H 24”W 30”W 36”W 42”W 48”W 54”W 60”W 66”W 72”W
Description:• Tackable PET Divider .75” thick, radius corners• .90 NRC rating• Made from 60% post consumer recyled PE plastic water bottles• VOC free• 100% recyclable polyester fiber• Easily clams onto surfaces 3/4” - 1-7/8”• Mounting hardware included (silver finish) - 66”W and over ship with 3 clamps* 30” H dividers available for use ONLY with ADCs (see page 14)
Notes:• Specifiy color - Pear, Cobalt, Sandstone, Ash, Slate, Charcoal• Lead time on orders of 19 or less: 2-3 weeks• Lead time on orders of 20 or more: 4 weeks
SURFACE MOUNTED DIVIDERS - MADE TO ORDER
EchoScape PET Divider EDD-PET-_ _-12 12” $318 $344 $376 $403 $435 $461 $481 $611 $630 (Surface Mounted) EDD-PET-_ _-18 18” $364 $396 $449 $468 $534 $553 $573 $754 $774 Made to Order EDD-PET-_ _-24 24” $410 $461 $488 $579 $599 $619 $645 $917 $937 * EDD-PET-_ _-30 30” $461 $488 $578 $599 $690 $717 $730 $943 $970
Fabric Fold Divider FDD-FF-_ _-12 12” $386 $427 $460 $493 $516 $574 $587 $751 $808 (Surface Mounted) FDD-FF-_ _-18 18” $476 $542 $623 $664 $682 $803 $817 $1,070 $1,168 Made to Order FDD-FF-_ _-24 24” $517 $591 $656 $721 $746 $852 $872 $1,119 $1,233 FDD-FF-_ _-30 30” $695 $859 $924 $990 $1,029 $1,316 $1,337 $1,701 $1,897
Description:• Tackable fabric 7/8” thick, radius corners• .30 NRC rating• 100% recyclable polyester fiber• Easily clamps onto surfaces 3/4” - 1-7/8”• Mounting hardware included (silver finish) - 66”W and over ship with 3 clamps* 30” H dividers available for use ONLY with ADCs (see page 16)
Notes:• Specifiy fabric color • Lead time on orders of 19 or less: 2-3 weeks• Lead time on orders of 20 or more: 4 weeks
Elements Line (Grade 1 Fabric)
FDD-FF-_ _-12 12” $411 $460 $493 $533 $556 $623 $635 $808 $874 FDD-FF-_ _-18 18” $525 $599 $689 $738 $769 $909 $928 $1,184 $1,299 FDD-FF-_ _-24 24” $558 $648 $721 $803 $833 $950 $975 $1,241 $1,356 FDD-FF-_ _-30 30” $785 $973 $1,055 $1,145 $1,203 $1,513 $1,551$1,938 $2,158
Fusion Line (Grade 2 Fabric)
December 9 2019 | v. 1.54 15
White Board Divider WDD-WB-_ _-12 12” $367 $409 $442 $474 $505 $637 $647 $746 $782 (Surface Mounted) WDD-WB-_ _-18 18” $431 $484 $578 $605 $618 $909 $918 $1,031 $1,091 Made to Order WDD-WB-_ _-24 24” $485 $556 $612 $692 $707 $950 $965 $1,079 $1,141
Description:• White board .7” thick, square corners• Easily clamps onto surfaces 7/8” - 1-7/8”• Mounting hardware included (silver finish) - 66”W and over ship with 3 clamps
Notes:• Lead time on all orders: 4 weeks
Model Number H 24”W 30”W 36”W 42”W 48”W 54”W 60”W 66”W 72”W
SURFACE MOUNTED DIVIDERS - MADE TO ORDER
Description:• Frosted Acrylic .25” thick, radius corners• Easily clamps onto surfaces 7/8” - 1-7/8”• Mounting hardware included (silver finish) - 66”W and over ships with 3 clamps
Notes:• Lead time on orders of 19 or less: 2-3 weeks• Lead time on orders of 20 or more: 4 weeks
Acrylic Divider ADD-_ _-12 12” $278 $307 $324 $356 $378 $393 $435 $512 $533 (Surface Mounted) ADD-_ _-18 18” $329 $368 $404 $451 $474 $521 $557 $645 $692 Made to Order ADD-_ _-24 24” $370 $431 $456 $553 $555 $578 $693 $782 $783
Acrylic Modesty Panel AMP-_ _-12 12” N/A N/A $272 $305 $328 $342 $384 $434 $456 (Surface Mounted) AMP-_ _-18 18” N/A N/A $353 $400 $424 $470 $506 $566 $615 Made to Order
Description:• Frosted Acrylic .25” thick, radius corners• Easily mounted under the work surface• Mounting hardware included (silver finish)
Notes:• Specify fabric color• Lead time on orders of 19 or less: 2-3 weeks• Lead time on orders of 20 or more: 4 weeks
December 9 2019 | v. 1.5416
SURFACE MOUNTED DIVIDERS - CLAMPS
Model Number List Price
Adjustable Divider Clamps ADC (1 pair) $97.00
Description:• Allows surface mounted dividers to adjust up or down• Mounts to underside of surface• For use with dividers .2” - 1.1” thick• For use with EchoShape & Fabric Fold Dividiers• Silver finish• Must be used with surface mounted dividiers 30” H
Notes:• Lead time on orders of 19 or less: 2-3 weeks• Lead time on orders of 20 or more: 4 weeks
• The offset bracket plate allows for a 1/2” gap from worksurface to divider, providing extra room for a clamp mounted monitor arm or power module.
Notes:• Shipped upon request only
Offset Bracket Plates ADC-OSB (1 pair) No Charge
December 9 2019 | v. 1.54 17
BEAM MOUNTED DIVIDERS - IN STOCK
Model Number H W List PricePET Dividers EDDI-PET-4818-_ _B 18” 48” $212.00(Beam Mounted) EDDI-PET-6018-_ _B 18” 60” $256.00In Stock EDDI-PET-4824-_ _B 24” 48” $249.00 EDDI-PET-6024-_ _B 24” 60” $314.00
Description:• Tackable PET Divider .75” thick, radius corners• .90 NRC rating• Made from 60% post consumer recyled PE plastic water bottles• VOC free• 100% recyclable polyester fiber• Mounting hardware included (silver finish)
Notes:• Specifiy color - “Ash” (SP-18) or “Slate” (SP-33)
Fabric Fold Dividier FDDI-FF-4818-_ _B 18” 48” $317.00(Beam Mounted) FDDI-FF-6018-_ _B 18” 60” $434.00In Stock FDDI-FF-4824-_ _B 24” 48” $394.00 FDDI-FF-6024-_ _B 24” 60” $529.00
Description:• Tackable fabric,7/8” thick, radius corners• .30 NRC rating• Mounting hardware included (silver finish)
Notes:• Specifiy color - “Light Grey” (HY-9910) or “Dark Grey” (HY-9911)
December 9 2019 | v. 1.5418
BEAM MOUNTED DIVIDERS - MADE TO ORDER
Model Number H 36”W 42”W 48”W 54”W 60”W 66”W 72”W
HRED-PET-_ _-12 12” $324 $350 $383 $409 $429 $559 $578 HRED-PET-_ _-18 18” $397 $415 $481 $500 $520 $702 $722 HRED-PET-_ _-24 24” $435 $527 $546 $566 $593 $865 $885
Description:• Tackable PET Divider .75” thick, radius corners• .90 NRC rating• Made from 60% post consumer recyled PE plastic water bottles• VOC free• 100% recyclable polyester fiber• Mounting hardware included (silver finish) - 66”W and over ships with 3 clamps
Notes:• Specifiy color - Pear, Cobalt, Sandstone, Ash, Slate, Charcoal• Lead time on orders of 19 or less: 2-3 weeks• Lead time on orders of 20 or more: 4 weeks
Fabric Fold Divider HRFD-FF-_ _-12 12” $414 $447 $472 $529 $543 $682 $739 (Beam Mounted) HRFD-FF-_ _-18 18” $578 $618 $638 $757 $773 $1,001 $1,099 Made to Order HRFD-FF-_ _-24 24” $610 $676 $701 $806 $828 $1,050 $1,164
Description:• Tackable fabric, 7/8” thick, radius corners• .30 NRC rating• Mounting hardware included (silver finish). 66”W and over ships with 3 clamps• Special sizes available: Please contact your sales rep
Notes:• Specifiy fabric color• Lead time on orders of 19 or less: 2-3 weeks• Lead time on orders of 20 or more: 4 weeks
Elements Line (Grade 1 Fabric)
Fusion Line (Grade 2 Fabric)HRFD-FF-_ _-12 12” $447 $488 $512 $578 $591 $739 $805 HRFD-FF-_ _-18 18” $643 $692 $725 $864 $883 $1,115 $1,230 HRFD-FF-_ _-24 24” $676 $757 $788 $905 $931 $1,173 $1,287
EchoScape PET Divider(Beam Mounted) Made to Order
December 9 2019 | v. 1.54 19
Model Number H 36”W 42”W 48”W 54”W 60”W 66”W 72”W
White Board Divider HRD-WB-_ _-12 12” $392 $425 $456 $588 $598 $670 $707 (Beam Mounted) HRD-WB-_ _-18 18” $529 $555 $569 $859 $869 $956 $1,016 Made to Order HRD-WB-_ _-24 24” $563 $642 $658 $900 $916 $1,003 $1,066
BEAM MOUNTED DIVIDERS - MADE TO ORDER
Description:• White board .7” thick, square corners• Mounting hardware included (silver finish) - 66”W and over ship with 3 clamps• Special sizes available: Please call your sales rep
Notes:• Lead time on all orders: 4 weeks
Acrylic Divider HRAD-_ _-12 12” $274 $306 $329 $344 $386 $436 $459 (Beam Mounted) HRAD-_ _-18 18” $355 $401 $425 $471 $508 $569 $617 Made to Order HRAD-_ _-24 24” $406 $504 $506 $529 $644 $706 $709
Description:• Frosted Acrylic .25” thick, radius corners• Mounting hardware included (silver finish) - 66”W and over ships with 3 clamps• Special sizes available: Please call your sales rep
Notes:• Lead time on orders of 19 or less: 2-3 weeks• Lead time on orders of 20 or more: 4 weeks
December 9 2019 | v. 1.5420
MOBILE PEDESTALS
Model Number (Specify Finish: SI, WH or BK) Width Depth Height Weight List Price
Mobile Pedestal MPEDBF-15-_ _ 15” 22” 21” 65 lbs $464.00
Description:• Mobile Box/File Pedestal• Includes lock and key• Includes pencil tray• Letter or legal filing• Includes casters (2 locking, 2 non-locking)• Stocked in silver, white and black
Notes:• Key alike available (add $10.00 to list)• Master/Core Key available (add $10.00 to list)
Mobile Slim Pedestal MPEDBF-10-_ _ 10.6” 22” 21” 55 lbs $464.00
Description:• Mobile Box/File Pedestal• Includes lock and key• Includes pencil tray• Letter or legal filing• Includes casters (2 locking, 2 non-locking)• Stocked in silver, white and black
Notes:• Key alike available (add $10.00 to list)• Master/Core Key available (add $10.00 to list)
Pedestal Cushion MPEDCUS-15 22” 15” 1.5” 6 lbs $99.00
Description:• Pedestal seat cushion• High density foam• Laminated plywood undestructyre• Attached with velcro• Stocked in #15-13 charcoal fabric
Notes:• Other colors available: 8 week lead time• 50 QTY minimum order for non-stocked colors
Pedestal Slim Cushion MPEDCUS-10 22” 10.6” 1.5” 5 lbs $99.00
Description:• Pedestal seat cushion• High density foam• Laminated plywood undestructyre• Attached with velcro• Stocked in #15-13 charcoal fabric
Notes:• Other colors available: 8 week lead time• 50 QTY minimum order for non-stocked colors
December 9 2019 | v. 1.54 21
Model Number (Specify Finish: SI, WH or BK) Width Depth Height Weight List Price
MONITOR ARMS
Model Number Weight Range Monitor Size List Price
Envoy Monitor Arm Envoy-1 2.2 - 19.8 lbs max 32” $247.00
Description:• Mounting: Desk clamp or bolt thru-mount• Vertical range: 12.4”• Horizontal range: 23.7”
Notes:• Available in silver (slv)• Lead time on orders of 50 or less: 3 days• Orders over 50, please check stock
Envoy Dual Monitor Arm Envoy-2 2.2 - 19.8 lbs per monitor max 32” $473.00
Description:• Mounting: Desk clamp or bolt thru-mount• Vertical range: 12.4”• Horizontal range: 23.7”
Notes:• Available in silver (slv)• Lead time on orders of 50 or less: 3 days• Orders over 50, please check stock
EVO Monitor Arm 5900-_ _ _ 1 - 15 lbs max 27” $303.00
Description:• Includes Desk Clamp (bolt thru-mount sold separetly model #8505)• Vertical range: 10.4”• Horizontal range: 18”
Notes:• Specify color: Black (104) Silver (124) White (248)• See page 23 for accessory mounting options
EVO Dual Monitor Arm 5902-_ _ _ 1 - 15 lbs per monitor max 27” $578.00
Description:• Includes Desk Clamp , thru-desk• Vertical range: 10.4”• Horizontal range:18”
Notes:• Specify color: Black (104) Silver (124) White (248)• See page 23 for accessory mounting options
December 9 2019 | v. 1.5422
MONITOR ARMS
Model Number Weight Range Monitor Size List Price
Ella Monitor Arm ELLA-1-CM 4 - 30 lbs max 43” $455.00
Description:• Mounting: Desk clamp or grommet-mount• Vertical range: 24.4”• Horizontal range: 11.5”
Notes:• Specify color: Black (104) Silver (124) White (248)
Ella Dual Monitor Arm ELLA-2-CM 2 -15 lbs per monitor max 30” $605.00
Description:• Mounting: Desk clamp or grommet-mount• Vertical range: 24.4”• Horizontal range: 11.5”
Notes:• Specify color: Black (104) Silver (124) White (248)
7000 Monitor Arm 7000-500-_ _ _ 2 - 13 lbs max 32” $339.00 7000-800-_ _ _ 7.5 - 25 lbs max 32” $339.00 7000-1000-_ _ _ 12 - 31 lbs max 32” $339.00
Description:• Includes FLEXmount ® :desk clamp, thru-mount, grommet-mount and wall mount• Vertical range: 16”• Horizontal range: 24”
Notes:• Specify color: Black (104) Silver (124) White (248) • See page 23 for available accessories
7000 Dual Monitor Arm 7000-8408-500-_ _ _ 2 - 13 lbs per monitor max 32” $662.00 7000-8408-800-_ _ _ 7.5 - 25 lbs per monitor max 32” $662.00
Description:• Includes FLEXmount ® :desk clamp, thru-mount, grommet-mount and wall mount• Vertical range: 16”• Horizontal range: 24”
Notes:• Specify color: Black (104) Silver (124) White (248)• See page 23 for available accessories
December 9 2019 | v. 1.54 23
MONITOR ARMS
Staxx™ Single STX-01S-_ _ _ 1 - 30 lbs max 50” $246.00
Model Number Weight Range Monitor Size List Price
Description:• Includes FLEXmount ® :desk clamp, thru-mount, grommet-mount and wall mount
Notes:• Specify color: Black (104) Silver (124) White (248)• See page 23 for available accessories
Staxx™ Dual STX-02S-_ _ _ 1 - 20 lbs per monitor max 24” $561.00 STX-02W-_ _ _ 1 - 20 lbs per monitor 24” - 30” $618.00
Description:• Includes FLEXmount ® :desk clamp, thru-mount, grommet-mount and wall mount
Notes:• Specify color: Black (104) Silver (124) White (248)• See page 23 for available accessories
STX-02S
STX-02W
Staxx™ Triple STX-03S-_ _ _ 1 - 15 lbs per monitor max 24” $668.00 STX-03W-_ _ _ 1 - 15 lbs per monitor 24” - 30” $712.00
Description:• Includes FLEXmount ® :desk clamp, thru-mount, grommet-mount and wall mount
Notes:• Specify color: Black (104) Silver (124) White (248)• See page 23 for available accessories
STX-03S
STX-03W
Staxx™ 1 over 1 STX-11S-_ _ _ 1 - 20 lbs per monitor max 30” $647.00
Description:• Includes FLEXmount ® :desk clamp, thru-mount, grommet-mount and wall mount
Notes:• Specify color: Black (104) Silver (124) White (248)• See page 23 for available accessories
December 9 2019 | v. 1.5424
Staxx™ 2 over 2 STX-22S-_ _ _ 1 - 15 lbs per monitor max 24” $777.00 STX-22W-_ _ _ 1 - 15 lbs per monitor 24” - 30” $804.00
Description:• Includes FLEXmount ® :desk clamp, thru-mount, grommet-mount and wall mount
Notes:• Specify color: Black (104) Silver (124) White (248)• See page 23 for available accessories
Model Number Weight Range Monitor Size List Price
STX-22S
STX-22W
Staxx™ 3 over 3 STX-33S-_ _ _ 1 - 10 lbs per monitor max 24” $1,124.00 STX-33W-_ _ _ 1 - 10 lbs per monitor 24” - 30” $1,166.00
Description:• Includes FLEXmount ® :desk clamp, thru-mount, grommet-mount and wall mount
Notes:• Specify color: Black (104) Silver (124) White (248)• See page 23 for available accessories
STX-33S
STX-33W
Staxx™ Dual Articulating STX-450-_ _ _ 10 - 23 lbs per monitor max 27” $732.00 STX-500-_ _ _ 2 - 13 lbs per monitor max 27” $732.00 STX-600-_ _ _ 5 - 17 lbs per monitor max 27” $732.00 STX-800-_ _ _ 7.5 - 25 lbs per monitor max 27” $732.00 STX-1000-_ _ _ 12 - 25 lbs per monitor max 27” $732.00
STX-450
STX-500STX-600STX-800STX-1000
Description:• Includes FLEXmount ® :desk clamp, thru-mount, grommet-mount and wall mount
Notes:• Specify color: Black (104) Silver (124) White (248)• See page 23 for available accessories
Staxx™ Articulating + STX-450-8510_ _ _ 10 - 23 lbs per monitor max 27” $884.00Laptop Mount STX-500-8510_ _ _ 2 - 13 lbs per monitor max 27” $884.00 STX-600-8510 _ _ _ 5 - 17 lbs per monitor max 27” $884.00 STX-800-8510_ _ _ 7.5 - 25 lbs per monitor max 27” $884.00 STX-1000-8510_ _ _ 12 - 25 lbs per monitor max 27” $884.00 STX-450-8510
Description:• Includes FLEXmount ® :desk clamp, thru-mount, grommet-mount and wall mount
Notes:• Specify color: Black (104) Silver (124) White (248)• See page 23 for available accessories
MONITOR ARMS
December 9 2019 | v. 1.54 25
Model Number List Price
MONITOR ARM ACCESSORIES
5900 Mount Kit 8508-_ _ _ $36.00
Description:• Mounting kit allows for the 5900 to be thru mounted to a work surface
Notes:• Specify color: Black (104) Silver (124) White (248)
5902 Mount Kit 8509-_ _ _ $118.00
Description:• Mounting kit allows for the 5902 to be thru mounted or grommet mountedto a work surface
Notes:• Specify color: Black (104) Silver (124) White (248)
Height Adjustable Adapter 8473-603 $36.00
Description:• Allows for fine-tune monitor height adjustment.• Attaches between tilter and VESA plate• Compatible with 7000 and Staxx series monitor mounts
Notes:• Color: Black e-coat
Sliding VESA Assembly 8519-_ _ _ $130.00
Description:• 9” of adjustment from left to right.• Ideal for positioning monitors of varying sizes side-by-side.• Allows for landscape/portrait monitor positioning.• Monitor tilter mechanism can tilt over 200 degrees.• Compatible with 7000 and Staxx series monitor mounts
Notes:• Specify color: Black (104) Silver (124) White (248)
December 9 2019 | v. 1.5426
WORK SURFACES
Model Number (Specify Laminate: PW, FC, MM, DW) Depth Width Weight List Price
Rectangular WS-2424- _ _ 24” 24” 14 lbs $250.00 WS-2430- _ _ 24” 30” 19 lbs $255.00 WS-2436- _ _ 24” 36” 21 lbs $274.00 WS-2442- _ _ 24” 42” 24 lbs $278.00 WS-2448- _ _ 24” 48” 28 lbs $288.00 WS-2454- _ _ 24” 54” 31 lbs $304.00 WS-2460- _ _ 24” 60” 35 lbs $321.00 WS-2466- _ _ 24” 66” 38 lbs $437.00 WS-2472- _ _ 24” 72” 42 lbs $453.00 WS-3030- _ _ 30” 30” 22 lbs $264.00 WS-3036- _ _ 30” 36” 26 lbs $276.00 WS-3042- _ _ 30” 42” 30 lbs $281.00 WS-3048- _ _ 30” 48” 35 lbs $299.00 WS-3054- _ _ 30” 54” 39 lbs $309.00 WS-3060- _ _ 30” 60” 44 lbs $340.00 WS-3066- _ _ 30” 66” 48 lbs $444.00 WS-3072- _ _ 30” 72” 53 lbs $460.00
(Work Surfaces must be ordered with a corresponding base/bench)
120 Degree Corner WS120-36362424-__ _ 36”x36” 24”x24” 110 lbs $834.00 WS120-36363030-__ _ 36”x36” 30”x30” 120 lbs $881.00 WS120-42422424-__ _ 42”x42” 24”x24” 120 lbs $922.00 WS120-42423030-__ _ 42”x42” 30”x30” 130 lbs $1,017.00 WS120-48482424-__ _ 48”x48” 24”x24” 130 lbs $1,061.00 WS120-48483030-__ _ 48”x48” 30”x30” 140 lbs $1,109.00
(Work Surfaces must be ordered with a corresponding base/bench)
Description:• Edge Detail: 1 1/8” LPL/TFL Laminate with 2mm PVC Matching Edge• Standard Laminate Colors: Pinnacle Walnut (PW), Fawn Cypress (FC), Manitoba Maple (MM), Designer White (DW)• Grommets not offered
In Stock Program:• Work surfaces ship in 3-5 business days• Designer White (DW) Laminate Only• Orders with work surfaces must include a corresponding base/bench• Order Quantity of 1 to 99 work surfaces• Orders of 10 work surfaces or less will have a $50 palletization charge• Orders under $1,500 NET will have a freight surcharge
Standard Laminate Program:• Lead Time: 10-15 business days plus shipping• Orders with work surfaces must include a corresponding base/bench• Orders of 10 work surfaces or less will have a $50 palletization charge• Orders under $1,500 NET will have a freight surcharge
Worksurface Details
*
**
December 9 2019 | v. 1.54 27
POWER/DATA BEAM
End Post with Foot HRPF23-E-_ _ End Post 23” x 3¼” x 3¼” 7 lbs $228.00
• Post ships with 15” foot
180 Degree Post with Foot HRPF23-180-_ _ 180° Post 23” x 3¼” x 3¼” 7 lbs $250.00
• Post ships with 15” foot
L Post HRP24-L-_ _ L Post, 2 way 24” x 3¼” x 3¼” 5 lbs $197.00
• Post ships with a leveling glide
T Post HRP24-T-_ _ T Post, 3 way 24” x 3¼” x 3¼” 5 lbs $217.00
• Post ships with a leveling glide
X Post HRP24-X-_ _ X Post, 4 way 24” x 3¼” x 3¼” 5 lbs $237.00
• Post ships with a leveling glide
Notes • Post, Frames and Trays available in silver, white and black • All posts ship with mounting hardware, connecting hinges and top cap
Model Number (Specify Finish: SI, WH or BK) Size Weight List Price
December 9 2019 | v. 1.5428
POWER/DATA BEAM Model Number (Specify Finish: SI, WH or BK) Size Weight List Price
120 Degree 3 way Post HRP24-3-120-_ _ 120° Post, 3 way 24” H 3 lbs $235.00
• Post ships with a leveling glide
Notes • Post, Frames and Trays available in silver, white and black • All posts ship with mounting hardware, connecting hinges and top cap
120 Degree 2 way Post HRP24-2-120-_ _ 120° Post, 2 way 24” H 3 lbs $214.00
• Post ships with a leveling glide
Beam Frame HRLB-36-_ _ Beam Frame 6” x 36” x 2¾” 8 lbs $654.00 HRLB-48-_ _ Beam Frame 6” x 48” x 2¾” 10 lbs $711.00 HRLB-60-_ _ Beam Frame 6” x 60” x 2¾” 12 lbs $767.00 HRLB-72-_ _ Beam Frame 6” x 72” x 2¾” 15 lbs $825.00
Description: • Raceway covers include 2 outlet cutouts and 1 voice/data cutout • Each raceway cover ships with voice/date cover plate and data jack adapter kit • Posts ordered separately • Beam ships pre-marked to accept beam mounted divider clamps
Cable Management Tray CMT2-36-_ _ Cable Management Tray 4” x 36” 3 lbs $74.00 CMT2-48-_ _ Cable Management Tray 4” x 48” 4 lbs $82.00 CMT2-60-_ _ Cable Management Tray 4” x 60” 5 lbs $90.00 CMT2-72-_ _ Cable Management Tray 4” x 72” 6 lbs $98.00
Description: • Allows user to lay cables outside of Power Beam • Mounts to underside of beam - one required for each side • Mounts left or right • When ordering for use with a benching system, please order one size smaller than work surface - Ex: 72” worksurface: Order a 60” Cable Management Tray • When ordering for use with a power beam, please order the matching size - Ex: 72” power beam: Order a 72” Cable Management Tray
December 9 2019 | v. 1.54 29
POWER
Model Number Description Size Weight List Price
Power Trac PT-36 Power Trac, 36” with Jumper 36” 4 lbs $217.00 PT-48 Power Trac, 48” with Jumper 48” 5 lbs $229.00 PT-60 Power Trac, 60” with Jumper 60” 6 lbs $241.00 PT-72 Power Trac, 72” with Jumper 72” 7 lbs $253.00
• 4 circuit, 8 wire system • Will accept up to 4 duplex receptacles per Trac (2 per side)
Duplex Receptacle DR-1 Duplex Receptacle, Circuit 1 1 lbs $24.00 DR-2 Duplex Receptacle, Circuit 2 1 lbs $24.00 DR-3 Duplex Receptacle, Circuit 3 1 lbs $24.00 DR-4 Duplex Receptacle, Circuit 4 1 lbs $24.00
DR-1-T24 Duplex Receptacle, Circuit 1, Title 24 1 lbs $28.00 DR-2-T24 Duplex Receptacle, Circuit 2, Title 24 1 lbs $28.00 DR-3-T24 Duplex Receptacle, Circuit 3, Title 24 1 lbs $28.00 DR-4-T24 Duplex Receptacle, Circuit 4, Title 24 1 lbs $28.00
CHBX Chicago Receptacle Box (sold individually) 1 lbs $260.00
Notes: • Ships in color matching Power Beam • For every Beam or Bench, order 2 CHBX (ie: 3 Beam or Bench x 2 CHBX = 6 CHBX)
Power Feed BFK-E Base Power Feed Kit, End Entry 72” 5 lbs $197.00 BFK-S Base Power Feed Kit, Side Entry 72” 5 lbs $215.00 CFK Ceiling Power Feed Kit 144” 9 lbs $242.00 BFK-E-NY Base Power Feed Kit, End Entry 72” 10 lbs $358.00 for New York
Notes: • BFK-E-NY is stocked in a common size. Special sizes available upon request: please contact your sales rep for more information • For complete Title 24 compliant electrical component, please call your sales rep for more information
Power Pole PP12 Power Pole 144” x 3¼” x 3¼” 6 lbs $545.00
Notes: • Ceiling Power Feed Kit must be ordered separately • Ships with a foot • Includes Ceiling Trim Kit • Can only be installed at end of run
December 9 2019 | v. 1.5430
BENCHING
HOW TO ORDER The HAT Benching System was designed to be very simply and easy to specify, order and install.
To specify, please follow these simple steps: 1. Specify a Dual Benching Unit for either a 48”, 60” or 72” worksurface. - This unit includes 2 MID benching bases with expandable frame (adjusts from 27.25” - 46.75” high) with adjustable glides, 2 horizontal connector bars, a Power Beam and Power Trac with Jumper Connector 2. Specify the Duplex Receptacles, Power Feed type (base or ceiling) and Power Pole (see page 29)
3. Specify a Connector Beam - The 11.25” Beam is used to connect a Dual Benching Unit to an adjoining Benching Unit or a power pole
4. Specify optional Cable Management Tray (see page 28)
5. Specify optional Dividers (see page 13-19)
6. Specify Work Surfaces (see page 26)
Model Number Top Size Recommended (Specify Finish: SI, WH) Depth Width Weight List Price
Dual Benching Unit DBUHAT-48-MID-L-_ _ 24” - 30” 48” 118 lbs $3,155.00 DBUHAT-60-MID-L-_ _ 24” - 30” 60” 122 lbs $3,235.00 DBUHAT-72-MID-L-_ _ 24” - 30” 72” 126 lbs $3,310.00
Description: • Includes 2 MID Benching Bases with Expandable Frame (adjusts 27.5” - 46.75” high) • Includes 2 horizontal connector bars to connect base legs • Includes Power Beam • Includes Power Trac with jumper connector
Notes: • Duplex Receptacles must be ordered separately • Base/Ceiling Power Feed must be ordered separately • Work Surfaces must be ordered separately • Beam or Surfaces Mounted Dividers must be ordered separately • Optional Cable Managemment Tray must be ordered separately • Benching only available in Silver and White
Chicago Dual Benching Unit DBUHAT-48-MID-L-CH-__ 24” - 30” 48” 118 lbs $2,938.00 DBUHAT-60-MID-L-CH-__ 24” - 30” 60” 122 lbs $3,006.00 DBUHAT-72-MID-L-CH-__ 24” - 30” 72” 126 lbs $3,069.00 Description: • Includes 2 MID Benching Bases with Expandable Frame (adjusts 27.5” - 46.75” high) • Includes 2 horizontal connector bars to connect base legs • Includes Power Beam • Please note CH model numbers do not included power trac with jumper connector
Notes: • Duplex Receptacles must be ordered separately • CHBX must be ordered separately • Base/Ceiling Power Feed must be ordered separately • Work Surfaces must be ordered separately • Beam or Surfaces Mounted Dividers must be ordered separately • Optional Cable Managemment Tray must be ordered separately • Benching only available in Silver and White
Model Number Top Size Recommended (Specify Finish: SI, WH) Depth Width Weight List Price
December 9 2019 | v. 1.54 31
Model Number (Specify Finish: SI, WH) Size Weight List Price
Description: • Connects 2 sections of Dual Benching • Jumper cable passed through this beam • 9” Connect Beam is used to connect to Power Pole • 11.25” Connector Beam allows a Mobile Slim Pedestal to fit into the dead space between Dual Benching Units
Note: Benching is only available in Silver and White
Connector Beam BENCH-9 CONNECT - _ _ 6” x 9” x 2¾” 3 lbs $184.00BENCH-10.5 CONNECT - _ _ 6” x 10.5” x 2¾” 3 lbs $184.00BENCH-11.25 CONNECT - _ _ 6” x 11.25” x 2¾”
3 lbs $184.00
BENCHING
December 9 2019 | v. 1.5432
ACCESSORIES
Surface Mounted SMPM-3 3 lbs $269.00Power/Data Module Description: • Includes 2 power Receptacles, 2 USB charger ports • Includes 72” power cord • Mounts to edge of surface (¾” - 1 ¾”) • Available in white finish • UL Approved
Model Number Weight List Price
Wire Management Sleeve WMS-42 1 lbs $39.00
Description: •Expandable zip up nylon mesh management sleeve • 42” length • Available in black
Adjustable Keyboard Platform AKP-1 23 lbs $549.00
Description: • Lift and release height adjustment with 6” travel (2 3/8” up, 3 5/8” down) • Tilt adjustment, +/- 15 degree • Short 14 3/4” track allows mechanism to stow under worksurface • 360 degree swivel • Keyboard tray size 20” x 11” with polyurethane foam wrist rest • Swivel mouse tray with pad (can be mounted on left or right) • Exceeds ANS/BIFMA x5.5 • Made in USA • Available in Black
Casters CAS-37 4 2 lbs $66.00
Description: • Set of four 37mm dual wheel casters (2 locking, 2 non locking) • For 2 leg base • Available in Black
CAS-37 5 3 lbs $83.00
Description: • Set of four 37mm dual wheel casters (2 locking, 3 non locking) • For 3 leg base • Available in Black
December 9 2019 | v. 1.54 33
Dynamic Solutions forthe Open Workplace376 Martin AveSanta Clara, CA 95050
408.437.8770
www.hatcontract.com