sales promotion, costumer loyalty and staff motivation: Formula Domina service
Product Presentation - ClearFlood · PDF filePhilips Lighting EMEA, Juan Gonzalez Valdespino,...
Transcript of Product Presentation - ClearFlood · PDF filePhilips Lighting EMEA, Juan Gonzalez Valdespino,...
Juan Gonzalez ValdespinoPhilips Lighting EMEAOct 2012
ClearFloodLED Sports & Area luminaire
Philips Lighting EMEA, Juan Gonzalez Valdespino, Oct 2012, v10
Market information
• HID Sports & larges areas “low power” mainly equipped with 100- 400W SON /HID lamps
• Not LED solution with
– Competitive price
– Enough lumen package
– Efficiency higher than conventional
6
Philips Lighting EMEA, Juan Gonzalez Valdespino, Oct 2012, v10
Customers and their needs
• Private costumer:
– Save energy & reduce CO2 footprint
– Instant restarting & Regulation
– Maintenance cost reduction
– No extra light use. Many options of light ouput/price
• Wholesaler:
– Save energy & reduce CO2 footprint
– Quick delivery time. One shape many aplications
– Components replaceable
• Installers:
– Easy to install same stirrup empreinte and opening without tooling ( option open with tooling)
– Safety with knife connector8
Philips Lighting EMEA, Juan Gonzalez Valdespino, Oct 2012, v10
Applications
• “Small” recreational sports• Industrial Areas• Parking lots• Building facades• Billboard
10
Philips Lighting EMEA, Juan Gonzalez Valdespino, Oct 2012, v10
ClearFloodPerfect bilan efficiency-price
Key benefits:• Point-to-point replacement from 70W & 250W HID floodlight• Energy savings up to 40% compared to HPI-P systems• Dimmable (DALI,1-10V, CLO) for even more energy savings• More light control. Light where is needed• Instant light, long lifetime• One shape for multipurpose applications
Fluorescent
12
Philips Lighting EMEA, Juan Gonzalez Valdespino, Oct 2012, v10
. • 5- possibilities with 120-98-82-64-48 LED to replace 70-250W HID systems
• 6-26 K lumens. 11 lumens output versions
• Psystem = 260W (instead of 430W)
• Optics officiency up 92%
• Up 95 lumen/Watt (luminaire)
• Lumen-maintenance 70% at 70 khrs
• CLO (maintenance factor=1)
• Excellent choice to replace 1:1 Tempo HID and SON-T
Lighting performance
14
Philips Lighting EMEA, Juan Gonzalez Valdespino, Oct 2012, v10
Lifetime details
ClearFlood has a useful lifetime of more 70.000 hours (L70 point)
• L80: 50000 hours
• L70: 70.000 hours
• Driver failure rate: 0,05% per 5000 hours
• Total luminaire failure rate: 0,15% per 5000 hours
15
Philips Lighting EMEA, Juan Gonzalez Valdespino, Oct 2012, v10
Compact design for a high-power Floodlight
• Flat design and square lines for freedom in application and easier to hide
• Integrated gear for easy to installator
• Flat and open fins to avoid dirty acumulation
• 2 axes of rotation with memory:
Vertical with 360º
Horizontal with 270º
16
Philips Lighting EMEA, Juan Gonzalez Valdespino, Oct 2012, v10
Specification
Key specification points:
• 10 differents lightoutputs:From 6000 lumen @ 50W (120 lm/W)To 26.000 lumen @ 241W (>105 lm/W)
• LED engine serviceable, CCT 4000K, CRI >75
• Open frame without tooling ( also option with)
• Painted in RAL9007
• Alloy L2521
• Horizontal memory
• 220-240 V 50-60 Hz, Class I , PF >0,92
• DALI dimmable, CLO,1-10V
• L70 75.000 hours @ 25ºC
• Ta -20ºC to +40ºC
• Aluminum housing, Glass cover, stirrup with memory
• IP66, IK09
• Options: RAL colors, class II, knife connector
• CE, ENEC
24
Philips Lighting EMEA, Juan Gonzalez Valdespino, Oct 2012, v10
Consumption*
25
Philips Lighting EMEA, Juan Gonzalez Valdespino, Oct 2012, v10
Asymetrical Beam
• Max at 60º
• More than 87% efficiency
• Reduced backlight
Symetrical Beam
• 12ºx12º
• 35ºx35º
• Efficiency more than 92%
Optical systemsClearflood offers 5 beam shapes*
3 x Road Optic
• R1,R2,R3 depending the spacing and the characteristic of the installation
• More than 91% Efficiency
26
Philips Lighting EMEA, Juan Gonzalez Valdespino, Oct 2012, v10
Application example:Sports• Only useful for low illuminance and small recreational applications
Illuminance values are average maintained illuminances including a maintenance factor of 0.8
Solution Luminaire QtyMounting
height (m)Eh ave Emin/Eave Emin/Emax
Power
installed
(W/lux)/
m²
Tempo 3 HPI-T 250W 8 8 133 0.71 0.53 2192 0.039
ClearFlood A 24klm 8 8 133.2 0.79 0.53 2080 0.037
ClearFlood A 14klm 8 8 77.7 0.79 0.53 1160* 0.36
Tempo 3 HPI-T 400W 4 8 105 0.72 0.51 1712 0.039
ClearFlood A 24klm 4 8 66.6 0.79 0.53 1040 0.037
SolutionLuminaire
Qty
Mounting
height (m)Eh ave Emin/Eave Emin/Emax
Power
installed
(W/lux)/
m²
Tempo 3 HPI-T 400W 12 8 245 0.6 0.36 5076 0.032
Tempo 3 HPI-T 250W 16 8 201 0.6 0.39 4384 0.034
ClearFlood A 24klm 16 8 243.1 0.67 0.37 4160 0.026
ClearFloodA 20Klm 16 8 202.6 0.67 0.37 3546* 0.027
27
*47% EnergySaving
*20% EnergySaving
Philips Lighting EMEA, Juan Gonzalez Valdespino, Oct 2012, v10
AREA Industrial Places (CIE) FM = 0,820 lux, Emin/Eave >0.25 for short term handling of large units and raw materials.50 lux Emin/Eave >0.4 for continuous handling.5 luminaries, DiaLUX 10º tilt. Must be checked each project!
TEMPO250W CLEARFLOOD
28
Solution spacingMounting
height (m)Width Eh ave Emin/Eave Emin/Emax
System
Power
System
Power x6
Luminaries
Power
Savings
Tempo 3 SON-
TPP250W16 10 16 41 0.50 0.29 276 1656W
ClearFlood A 18klm 16 10 16 36 0.48 0.35 218 1313W 21%
Philips Lighting EMEA, Juan Gonzalez Valdespino, Oct 2012, v10
Building façadesThe recommended illuminance on a façade mainly depends on the reflective characteristics of the façade and on the luminance level of its surrounding. This could be summarized by the following table :• 25 to 50 lux : clear surface and dark surrounding • 50 to 100 lux : clear surface and clear surrounding, or dark surface and dark surrounding • 100 to 200 lux : dark surface and clear surrounding
Illuminance values are average maintained illuminances including a maintenance factor of 0.8
Height (m) Eh ave (lux) d(m) S(m) S'(m) Emin/Eave W luminaires lamp
6 140 3 6 1.5 0.41 169 Tempo 2 SON-TPP150W
6 101 3 6 1.5 0.57 166 Tempo 2 MHN-TD 150W
6 102 3 6 1.5 0.45 109 ClearFlood A 10klm
12 64.6 4 8 2 0.21 169 Tempo 2 SON-TPP150W
12 47 4 8 2 0.22 166 Tempo 2 MHN-TD 150W
12 45.3 4 8 2 0.23 109* ClearFlood A 10klm
29
*35% EnergySaving
Philips Lighting EMEA, Juan Gonzalez Valdespino, Oct 2012, v10
Billboard light / Advertisement board
An average illuminance level of approximately 300 lux with uniformity (mini/average) 0.4 is generally required. The table below gives recommended installation to fit with these requirements. Illuminance values are average maintained illuminances including a maintenance factor of 0.8
Solution H*W D(m) S(m) Ht(m) Eave Emin/Eave Emin/EmaxSystem
Power (W)(W/lux)/m²
Tempo 2 MHN-TD 1502.5x5m 2 3 2.5 366 0.64 0.46 167 0.073
ClearFlood 8klm 2.5x5m 2 3 2.5 319 0.61 0.41 93* 0.047
30
*44% EnergySaving
Philips Lighting EMEA, Juan Gonzalez Valdespino, Oct 2012, v10
Dimming
• Overview of different dimming options:
• Universal DALI protocol
• 1-10 Volts : With SDU
• Constant lumen. LLMF=1 so MF= LMF. In our case.
MF=0,9.
( A webinar about the CLO use will be done)
31
Philips Lighting EMEA, Juan Gonzalez Valdespino, Oct 2012, v10
Heat management
• ClearFlood can be used in ambienttemperatures (outdoor) from -20ºC to +40ºC
• 3 special Version at -20 to 50ºC
• ClearFlood has temperature protection: if the LEDs get too hot, the light dims automaticallyto prevent damage. NTC control
• ClearFlood design creates an airflow aroundthe product to prevent dirt from settling on the luminaire
32
Philips Lighting EMEA, Juan Gonzalez Valdespino, Oct 2012, v10
Stirrup. Multiporpose footprint
• Same footprint of the existing conventionalsolutions (Philips and competitors)
• Main investment for a new installation is the poles.
• Sustitution only fixtures for a new installation. Same poles
• ROI lower because only change of the fixture
33
Philips Lighting EMEA, Juan Gonzalez Valdespino, Oct 2012, v10
High-quality glass cover
• ClearFlood has an extra-white glass cover
• White glass instead of standard greenishglass:
– Better light transmission
– More neutral color appearance
• Thermally toughened glass:
– Increased impact and bending strength
– Glass will break in small and bluntpieces
34
Philips Lighting EMEA, Juan Gonzalez Valdespino, Oct 2012, v10
LED: Lumileds Luxeon RGear: Philips XitaniumFixture: Philips Valladolid FactoryMCPCB:SMD assembly Valladolid Die Cast: Philips Saeta
Philips control 100% process
Philips 100%
35
Philips Lighting EMEA, Juan Gonzalez Valdespino, Oct 2012, v10
Dimensions & weights
Weights :•>14 klm: 16 kg• <14klm: 15 kg
36
Philips Lighting EMEA, Juan Gonzalez Valdespino, Oct 2012, v10
Logistics
• Production lead time 3 weeks from ordering moment
• Forecasting of the pipeline is crucial to secure this lead time
• Basic range:
38
Philips Lighting EMEA, Juan Gonzalez Valdespino, Oct 2012, v10 40