PRODUCT DATASHEETfile1.dzsc.com/product/16/03/09/988988_165659751.pdf · Performance Specification...
Transcript of PRODUCT DATASHEETfile1.dzsc.com/product/16/03/09/988988_165659751.pdf · Performance Specification...
A16 Series PTC Devices
PRODUCT DATASHEET
Page 1/6
A16 Series PTC Devices
Description
JDTFUSE A16 Series Radial Leaded PTCs are designed to provide resettable overcurrent protection serving a wide range of electronics applications. With maximum 16 volts and maximum 100-ampere short circuit rating, they offer an ideal solution for USB protection.
Features
● ● ● ●●
100A short circuit rating16V Operating voltagesFast time–to–tripMeets all USB protection requirementsRoHS compliant, Lead-Free and Halogen-Free*
Computers & peripheralsAny USB applicationGeneral Electronics
Applications
● ● ●
Agency Approvals
Agency File Number
E472196
pending
Regulation Standard
2002/95/EC
EN14582
JDT FUSE Industrial Corp.
www.jdtfuse.com
Performance Specification
Environmental Specifications
Page 2/6
I hold = Hold Current. Maximum current device will not trip in 25°C still air.I trip = Trip Current. Minimum current at which the device will always trip in 25°C still air.V max = Maximum operating voltage device can withstand without damage at rated current (Imax).I max = Maximum fault current device can withstand without damage at rated voltage (V max).Pd = Power dissipation when device is in the tripped state in 25°C still air environment at rated voltage.Ri min/max = Minimum/Maximum device resistance prior to tripping at 25°C.R1max = Maximum device resistance is measured one hour post reflow.CAUTION : Operation beyond the specified ratings may result in damage and possible arcing and flame.
Model V max(V dc)
I max(A)
I hold@25°C
(A)
I trip@25°C
(A)
P dTyp.(W)
MaximumTime To Trip Resistance
Current(A)
Time(Sec)
R i min(W)
R i max(W)
R1max(W)
Test Conditions Resistance change
A16 Series PTC Devices
161616161616161616161616161616161616
A16-090A16-110A16-135A16-160A16-185A16-250A16-300A16-400A16-500A16-600A16-700A16-800A16-900A16-1000A16-1100A16-1200A16-1300A16-1400
4040404040404040404040404040404040100
0.901.101.351.601.852.503.004.005.006.007.008.009.0010.0011.0012.0013.0014.00
1.802.202.703.203.705.005.106.808.5010.2011.9013.6015.3017.0018.7020.4023.0023.80
0.600.700.800.901.001.202.302.402.602.803.003.003.303.603.704.204.404.60
8.008.008.008.008.0012.5015.0020.0025.0030.0035.0040.0045.0050.0055.0060.0065.0070.00
1.22.34.59.010.05.01.01.72.03.33.55.05.56.07.07.58.59.0
0.0700.0500.0400.0300.0300.0200.0340.0200.0140.0090.0060.0050.0040.0030.0030.0020.0020.002
0.12000.09500.07400.06100.05100.03500.06500.03900.02300.01900.01300.01100.00920.00710.00620.00600.00600.0045
0.1800.1400.1200.1100.0900.0600.1050.0630.0440.0300.0210.0180.0150.0120.0100.0090.0090.008
Passive aging
Humidity aging
Thermal shock
Resistance to solvent
Vibration
Ambient operating conditions : - 40 °C to +85 °CMaximum surface temperature of the device in the tripped state is 125 °C
+85°C, 1000 hrs.+85°C, 85% R.H. , 168 hours+85°C to -40°C, 20 timesMIL-STD-202,Method 215MIL-STD-202,Method 201
±5% typical±5% typical±33% typicalNo changeNo change
JDT FUSE Industrial Corp.
www.jdtfuse.com
Thermal Derating Curve
Page 3/6
A16 Series PTC Devices
Derating Curves for A16 Series
-40 -30 -20 -10 0 10 20 30 40 50 60 70 80
0.2
0.4
0.6
0.8
1.0
1.2
1.4
1.6
1.8
Temperature (°C )
Per
cent
age
of R
ated
Cur
rent
Average Time-Current Curve
Typical Time-To-Trip Curve at 25°C
0.01
0.1
1
10
100
1000
001011
Tim
e In
Sec
onds
Current In Amperes
0.75A0.90A1.10A1.35A1.60A1.85A2.50A3.00A4.00A5.00A6.00A7.00A8.060A9.00A10.0A11.0A14.0A15.0A16.0A
JDT FUSE Electronics Corp.
www.jdtfuse.com
Soldering Parameters
Page 4/6
WAVE SOLDERING INFORMATIONS
A16 Series PTC Devices
Pre-Heating Zone
Soldering Zone
Cooling Zone
◎Specifications are subject to change without notice.
Max. ramping rate should not exceed 4℃/Sec.
Max. solder temperature should not exceed 260℃
Cooling by natural convection in air.
Time
TP 260
100
25
Soldering 5Sea.MAX
Gradual Cooling
Pre-Heating 1 Minute Min.
Tem
pera
ture
(°C
)
JDT FUSE Industrial Corp.
www.jdtfuse.com
Page 5/6
A16 Series PTC Devices
Physical Dimensions(mm.)
PHYSICAL SPECIFICATIONS :
Materials : Leads
Lead Solderability : Device Labeling :
A16-090~250 : Tin plated copper-clad steel, 24 AWG (0.51mm/0.020" Dia.)A16-300~1100 : Tin plated copper, 20 AWG (0.81mm/0.032" Dia.)A16-1200~1400 : Tin plated copper, 18 AWG (1.0mm/0.04" Dia.) MIL-STD-202, Method 208EDevice is marked with Logo, amperage rating , voltage rating & date code.
Model LeadStyleMax.
AMax.
B CMax.
DMax.
EMax.
A16-090A16-110A16-135A16-160A16-185A16-250A16-300A16-400A16-500A16-600A16-700A16-800A16-900A16-1000A16-1100A16-1200A16-1300A16-1400
7.407.408.908.9010.2010.407.108.9010.4010.7012.7013.4014.0016.5017.5018.5023.5023.50
12.2014.2013.5015.2015.7014.3011.0015.2015.7018.3019.7020.1024.9024.9024.9026.7027.9027.90
7.67.67.67.67.67.67.67.67.67.67.67.67.67.67.67.67.67.6
5.105.105.105.105.105.105.105.105.105.105.105.105.105.105.1010.2010.2010.20
333333333333333
3.53.53.5
KinkKinkKinkKinkKinkKink
StraightStraightStraightStraightStraightStraightStraightStraightStraightStraightStraightStraight
GF135 E
F
C
A
C
B
D
E A
B
DC
B
D
A
= 1.35A hold current= Radial type 16 Vrms = Trademark a16
JDT FUSE Industrial Corp.
www.jdtfuse.com
Page 6/6
A16 Series PTC Devices
Cross Reference
“PolySwitch” is a registered trademark of Tyco Electronics.“POLY-FUSE” is a registered trademark of Littelfuse,Inc.“EVERFUSE” is a registered trademark of Polytronics Technology Corp.
Tape & Reel packaging per EIA468-B standard.
ModelTyco / PolySwitch® Bourns / POLY-FUSE® Polytronics / EVERFUSE®
Cross Reference
A16-090A16-110A16-135A16-160A16-185A16-250A16-300A16-400A16-500A16-600A16-700A16-800A16-900A16-1000A16-1100A16-1200A16-1300A16-1400
RUSBF090RUSBF110RUSBF135RUSBF160RUSBF185RUSBF250RGEF300RGEF400RGEF500RGEF600RGEF700RGEF800RGEF900RGEF1000RGEF1100RGEF1200
-RGEF1400
MF-RHT070---
MF-RHT200-
MF-RG300MF-RHT450MF-RG500MF-RHT650MF-RHT750
---
MF-R1100-
MF-RHT1300-
RLD16P090BFRLD16P110BFRLD16P135BFRLD16P160BFRLD16P185BFRLD16P250BFRLD16P300GFRLD16P400GFRLD16P500GFRLD16P600GFRLD16P700GFRLD16P800GFRLD16P900GFRLD16P1000GFRLD16P1100GFRLD16P1200GF
-RLD16P1400GF
Model Reel QTY Bag QTY
A16-090 ~ A16- 600A16-700 ~ A16- 900
A16-1000 ~ A16-1400
30001500
-
500500500
Packaging Quantity
JDT FUSE Industrial Corp.
www.jdtfuse.com