Product Overview - The Roller Door Doctor · Shiplap profile Colours Dark Oak (Std Colour), Walnut,...
Transcript of Product Overview - The Roller Door Doctor · Shiplap profile Colours Dark Oak (Std Colour), Walnut,...
Pictures only indicative of final colour and finish. Timber is a natural product and variances between timber selection can be large. Timber is randomly selected.
Product Overview
Web: www.danmardoors.com.au Email: [email protected] Tel: (08) 9309 6111
20 October 2009
Cedar Panel 86 Description 86mm horizontal panelling fixed
onto a sturdy frame
Frame Aluminium rails with timber bracing [DR10—86 (10)] or full aluminium frame [DR10—86 (12)] from early 2010
Cladding / Inserts 86x10 or 86x12 Western Red Cedar lining boards
Options Vee Joint or Shiplap profile
Colours Dark Oak (Std Colour), Walnut, Jarrah, Clear Pine, Clear, Oiled
Product Code DR10 - 86 (10) / DR10-86 (12)
Natural Timber Collection
Cedar Panel 135 Description 135mm horizontal panelling
fixed onto a sturdy frame Frame Aluminium rails with timber
bracing / Full aluminium frame from early 2010
Cladding / Inserts 135x12 Western Red Cedar lining boards
Options Vee Joint or Shiplap profile
Colours Dark Oak (Std Colour), Walnut, Jarrah, Clear Pine, Clear, Oiled
Product Code DR10 - 135
Raised Panel Description Solid Western Red Cedar door
with raised panels Frame 40mm thick rails and stiles
Cladding / Inserts 18mm thick, fielded (raised) panels
Options
Colours Dark Oak (Std Colour), Walnut, Jarrah, Clear Pine, Clear, Oiled
Product Code DL-1
Louvre Panel Description Solid Western Red Cedar door
with louvre panels Frame 40mm thick rails and stiles
Cladding / Inserts Specially manufactured louvre panels
Options Open or closed louvres
Colours Dark Oak (Std Colour), Walnut, Jarrah, Clear Pine, Clear, Oiled
Product Code Louvre
Pictures only indicative of final colour and finish. Timber is a natural product and variances between timber selection can be large. Timber is randomly selected.
Product Overview
Web: www.danmardoors.com.au Email: [email protected] Tel: (08) 9309 6111
20 October 2009
Classic Panel Description Solid cedar door with vertical
86mm Vee Joint panels
Frame 40mm thick rails and stiles
Cladding / Inserts Vee Joint panels
Options 135mm timber in panels Horizontal boards in panels Shiplap profile
Colours Dark Oak (Std Colour), Walnut, Jarrah, Clear Pine, Clear, Oiled
Product Code DR-2
Recessed Panel Description Solid cedar door with flat cedar
inserts Frame 40mm thick rails and stiles Cladding / Inserts 18mm thick, flat cedar panels
(reverse of Raised Panel).
Options Ply (shown—can have large colour variation), Metal
Colours Dark Oak (Std Colour), Walnut, Jarrah, Clear Pine, Oiled
Product Code DR-6
Barn Panel Description 135mm vertical Vee Joint pan-
elling on a sturdy frame with horizontal whalers
Frame Aluminium rails with timber bracing / Full aluminium frame from early 2010
Cladding / Inserts Western Red Cedar lining boards
Options 86mm lining boards. Shiplap Profile With or without bolts
Colours Dark Oak (Std Colour), Walnut, Jarrah, Clear Pine, Clear, Oiled
Product Code DL-3
Verti Panel Description 135mm vertical panelling (Vee
Joint) on a sturdy frame (Tilt door shown)
Frame Aluminium rails with timber bracing / Full aluminium frame from early 2010
Cladding / Inserts Western Red Cedar lining boards
Options 86mm lining boards. Shiplap Profile
Colours Dark Oak (Std Colour), Walnut, Jarrah, Clear Pine, Clear, Oiled
Product Code DL-7
Natural Timber Collection
Pictures only indicative of final colour and finish. Timber is a natural product and variances between timber selection can be large. Timber is randomly selected.
Product Overview
Web: www.danmardoors.com.au Email: [email protected] Tel: (08) 9309 6111
20 October 2009
Carriage Panel Description 135mm vertical Vee Joint pan-
elling with louvres in top panel
Frame Aluminium rails with timber bracing / Full aluminium frame from early 2010
Cladding / Inserts Western Red Cedar lining boards with louvre panels
Options 86mm boards, Herringbone design, other panel inserts such as glass, perspex, metal
Colours Dark Oak (Std Colour), Walnut, Jarrah, Clear Pine, Clear, Oiled
Product Code DR-8
Herringbone Panel Description 135mm tongue and groove
panelling fixed in a herringbone pattern (Tilt door shown)
Frame Aluminium rails with timber bracing / Full aluminium frame from early 2010
Cladding / Inserts Western Red Cedar lining boards
Options 86mm boards
Colours Dark Oak (Std Colour), Walnut, Jarrah, Clear Pine, Clear, Oiled
Product Code DR-1
Ply Panel Description Ply sheets fixed onto on a
sturdy frame with black rebates on all joins
Frame Aluminium rails with timber bracing / Full aluminium frame from early 2010
Cladding / Inserts AA Grade Marine Ply
Options Butt joins
Colours Dark Oak (Std Colour), Walnut, Jarrah, Clear Pine, Oiled
Product Code Ply
Ply and Batten Panel Description Ply sheets and cedar battens
fixed onto on a sturdy frame Frame Aluminium rails with timber
bracing / Full aluminium frame from early 2010
Cladding / Inserts AA Grade Marine Ply and Western Red Cedar Battens
Options
Colours Dark Oak (Std Colour), Walnut, Jarrah, Clear Pine, Oiled
Product Code P&B
Natural Timber Collection
Web: www.danmardoors.com.au Email: [email protected] Tel: (08) 9309 6111
20 October 2009
Product Overview
Clearlite Description Perspex inserted into a custom
designed aluminium frame Frame Extruded aluminium
Cladding / Inserts 3mm Perspex
Options Inserts: 4.5 or 6mm Perspex Frame Option 1: Standard Frame Option 2: Anti-pinch rail with built in truss (recommended as truss not seen through panel)
Colours Frame: Any powder coat colour Perspex: std colours are Opal, Clear, Ice, Grey
Product Code Clearlite
Contemporary Designs
Twinlite Description Twin-walled polycarbonate
used with a custom designed aluminium frame
Frame Extruded aluminium Cladding / Inserts 6mm twin-walled and fluted
polycarbonate
Options Frame Option 1: Standard Frame Option 2: Anti-pinch rail with built in truss (recommended as truss not seen through panel)
Colours Frame: Any powder coat colour Twin-wall: Opal, Clear, Grey Tint, Platinum, Bronze Tint, Steel
Product Code Twinlite
Multilite Description Multi-cell polycarbonate used
with a custom designed alumin-ium frame
Frame Extruded aluminium Cladding / Inserts 8mm or 10mm multi-cell poly-
carbonate Options Frame Option 1: Standard
Frame Option 2: Anti-pinch rail with built in truss (recommended as truss not seen through panel)
Colours Frame: any powder coat colour Multi-cell: Opal, Clear, Reflec-tive Grey, Grey, Blue, Green, Ice, Bronze
Product Code Danpalite
Barlite Description Welded aluminium frame with
horizontal bars and Perspex
Frame 50x50 welded aluminium with 19mm horizontal bars
Cladding / Inserts Perspex Options Perforated Inserts
Vertical Bars Colours Frame: Any powder coat colour
Perspex: Opal, Clear, Ice
Product Code Bar & Perspex
Web: www.danmardoors.com.au Email: [email protected] Tel: (08) 9309 6111
20 October 2009
Product Overview
Perfalite 18
Description 18% perforated sheeting used with a custom designed alumin-ium frame
Frame Extruded aluminium
Cladding / Inserts 18% perforated aluminium
Options Frame Option 1: Standard Frame Option 2: Anti-pinch rail with built in truss (recommended as truss not seen through panel) 3mm Perspex backing
Colours Any powder coat colour
Product Code Perfalite-18
Perfalite 42 Description 42% perforated sheeting used
with a custom designed alumin-ium frame
Frame Extruded aluminium
Cladding / Inserts 42% perforated aluminium
Options Frame Option 1: Standard Frame Option 2: Anti-pinch rail with built in truss (recommended as truss not seen through the panel) 3mm Perspex backing
Colours Any powder coat colour
Product Code Perfalite-42
Aliwood
Description Timber inserts used with a cus-tom designed aluminium frame
Frame Extruded aluminium
Cladding / Inserts 86mm Western Red Cedar
Options Frame Option 1: Standard Frame Option 2: Anti-pinch rail with built in truss Vertical Boards
Colours Frame: any powder coat colour Timber: Dark Oak (Std Colour), Walnut, Jarrah, Clear Pine, Oiled
Product Code Aliwood
Contemporary Designs
Timberlite Description Solid cedar door with Perspex
inserts Frame 40mm thick rails and stiles Cladding / Inserts Perspex or Twinwall
Options Any suitable flat material
Colours Dark Oak (Std Colour), Walnut, Jarrah, Clear Pine, Oiled
Product Code Timberlite
Web: www.danmardoors.com.au Email: [email protected] Tel: (08) 9309 6111
20 October 2009
Product Overview
Alipanel Description Aluminium composite material
face fixed onto a sturdy frame. Rebate effect on joins
Frame Aluminium rails with timber bracing / Full aluminium frame from early 2010
Cladding / Inserts Aluminium composite material
Options Joins can be butt joined Other composite materials
such as Symonite, Alpolic etc. available on request
Colours Numerous colours—please discuss options with us
Product Code Alipanel
Galvapanel Description Continuous, pressed galva-
nized sheets are formed into the required panels
Frame Incorporated into the design
Cladding / Inserts 1– 1.2mm thick galvanized sheeting
Options
Colours Any powder coat colour
Product Code Galvapanel
Cedar Batten Panel Description Solid timber battens are fixed to
a welded aluminium frame
Frame 50x50 welded aluminium
Cladding / Inserts Western Red Cedar battens
Options 40x18mm or 65x18mm battens Perspex backing
Colours Frame: any powder coat colour Timber: Dark Oak (Std Colour), Walnut, Jarrah, Clear Pine, Clear, Oiled
Product Code CB-40 or CB-65
Ali Batten Panel
Description Aluminium battens are fixed to a welded aluminium frame
Frame 50x50 welded aluminium
Cladding / Inserts 65x16 pencil rounded alumin-ium battens
Options Perspex backing Other batten sizes upon re-quest
Colours Any powder coat colour
Product Code AB-65
Contemporary Designs
Web: www.danmardoors.com.au Email: [email protected] Tel: (08) 9309 6111
20 October 2009
Product Overview
Mini Orb Description Corrugated mini orb material
face fixed onto a sturdy alumin-ium and timber frame
Frame Aluminium rails with timber bracing / Full aluminium frame from early 2010
Cladding / Inserts Mini Orb
Options Custom Orb instead of mini orb (Product Code = COP)
Colours Zincalume or all colourbond colours
Product Code MOP
Cedar Mini Orb Description Mini Orb door with cedar bor-
ders on each panel Frame Aluminium rails with timber
bracing / Full aluminium frame from early 2010
Cladding / Inserts Mini Orb sheeting with 140x18mm Western Red Cedar
Options Custom Orb instead of mini orb (Product Code = COCP)
Colours Cladding: Zincalume or all col-ourbond colours Timber: Dark Oak (Std Colour), Walnut, Jarrah, Clear Pine, Clear, Oiled
Product Code MOCB
Ali Mini Orb Description Mini Orb inserted into a custom
designed aluminium frame
Frame Extruded Aluminium
Cladding / Inserts Mini Orb Options Frame Option 1: Standard
Frame Option 2: Anti-pinch rail with built in truss
Colours Frame: any powder coat colour Mini Orb: Zincalume or all col-ourbond colours
Product Code MOAB
Ali Louvre Panel Description Full aluminium door. Louvre
inserts fitted into a custom de-signed frame
Frame Extruded aluminium
Cladding / Inserts Aluminium Louvre Panels
Options Inserts: Open or closed louvres Frame Option 1: Standard Frame Option 2: Anti-pinch rail with built in truss
Colours Any powder coat colour
Product Code Ali Louvre
Contemporary Designs
Product Overview
Web: www.danmardoors.com.au Email: [email protected] Tel: (08) 9309 6111
20 October 2009
Bar Panel Description Welded aluminium frame with
horizontal bars Frame 50x50 welded aluminium with
19mm horizontal bars Cladding / Inserts None
Options Vertical instead of horizontal bars
Colours Any powder coat colour
Product Code Bar Panel
Commercial Range
Mesh Panel Description Stainless steel mesh used with
a custom designed aluminium frame
Frame Extruded aluminium
Cladding / Inserts 1.6mm stainless steel mesh
Options Frame Option 1: Standard Frame Option 2: Anti-pinch rail with built in truss (recommended as truss not seen through panel)
Colours Frame: Any powder coat colour Mesh: Black
Product Code Mesh
Grille Panel Description Diamond shaped security mesh
used with a custom designed aluminium frame
Frame Extruded aluminium
Cladding / Inserts Diamond shaped security mesh
Options Frame Option 1: Standard Frame Option 2: Anti-pinch rail with built in truss (recommended as truss not seen through panel)
Colours Any powder coat colour
Product Code Grille
Product Overview
Web: www.danmardoors.com.au Email: [email protected] Tel: (08) 9309 6111
20 October 2009
Custom and Combination Examples
The following garage doors are a small sample of some of the various custom or combination garage doors that we have produced. They are shown to illustrate that at Danmar we will work with our customers to design and manufacture the right garage door to suit any home or building.
Product Overview
Web: www.danmardoors.com.au Email: [email protected] Tel: (08) 9309 6111
20 October 2009
Custom and Combination Examples