Description: Utility model - protected by law; patent pending Corresponds to CE according to DIN EN 294 (passing through openings)

Hydro-Pneumatic drive Open tools for comfortable operation Press cut of the opening for the inlet drive*

Reiplinger® GLS for triple hole punching installed on rotating mechanism*

Including foot control Incl. measurement device (1:1 & 1:2, measuring range = 2500 mm)

Including blowout pistol for easy waste removal Solidworkbench Expandabletoamulti-taskworkstation

BS - Multi - Max® Bearbeitungstisch

Product Overview

BS Multi - Max HS®

Hand lever punch for straight and eccentric cut

Description: Manual Operation Fitting Punch For Straight and Eccentric CutIntegrated,AdjustableOffsetStroke Slotted Hole or Round Holer Compressed Air Independent Location Independent Punch Machine for manufacturing small batch dimensions

Technical data:Required leverage Force: 250 NLever Arm: 800 mmHeight without lever arm: 150 mmDeepness: 100 mmWidth: 140 mmWeight: 5 kg

Description: Hydropneumatic drive Straight cut Open tool – direct access Safe (CE) Easy handling Operating pressure 0,6 – 1 MPa (6 - 10 bar)

Precise, hardened guide bushes Multiple cutting edges by turning the die up to 8 times

Technical Data:Punching Force at 0,675 MPa (6,75 bar): 40kNMax. pressure: 1 MPa (10 bar)

Max. bar size: Fl. 18 x 6,5 mmCross section St 37: max. 96 mm2

Air consumption at 0,6 MPa (6 bar): (approx.) 4 NL/HubOil volume - Oil type HLP22: (approx.) 50 cm3

Weight: (approx.) 6kgIncluding controls & accessories: 8,5kg

BS - Multi - Max® BeSt40Punching Machine for straight cut (Form Cut)

Accessories Foot control Hand control Measuring equipment Scale Slide gauge mounting adapter for most common sash workingtables

Description: Corresponds to CE according to DIN EN 294 (passing through openings)

Pneumatic drive Including foot controlFreeWorkbenchmounting Mounting possibility to Reiplinger®

machiningworkbenchFreeWorkbenchmountingAllowsworkfloworientedpositioning

Accessories Measuring device (1:1 & 1:2), left or right site (max. measure range 2500 mm) Stand for measuring device

Technical Data:PunchForce: 14kNat 0,6 MPa (6 bar)

WorkingPressuremin.: 0,6 MPa (6 bar)

WorkingPressuremax.: 1 MPa (10 bar)

Weight: (approx.)13kg

Installation dimensions could be received

Aufsatzgetriebestanze PS AGSPress cut of the opening for top drives

Description: Corresponds to CE according to DIN EN 294 (Passing through Openings)

Pneumatic Drive Integrated Manual Control For Aluminum or Polyamide Driving Rods Diameter 4,5 – 10 mm Closed ToolPuncheswithDifferentCuttingProfiles: O | O (Hole-Slot-Hole) O (Hole Only, i.e. for Coupling)

Accessories Feet Control Stand for the Measuring Device Measuring Device (max. measuring

range = 2500 mm)

Technical Data:Punch diameter: 4,5 - 10 mmPunching Force: PolyamideDrivingRods 7,5 kNat 0,6 MPa (6 bar) Aluminum Driving Rods 10,3 kNat 0,6 MPa (6 bar)

WorkingPressuremin.: 0,6 MPa (6 bar)

WorkingPressuremax.: 1 MPa (10 bar)

Weight: (approx.)10 kgInstallation Dimensions could be received after Consultation!

BS - Multi - Max® PS AluFitting Punching machine for Machining of Driving Rods for Aluminum Windows

Handstanze PFS - Multi - Max®

Punching of bonding- and pin holes for corner joints

Description: Mobile light hand punching machine Ergonomic centre of mass Hydropneumatic drive Including hand controlOptionalavailablemountingpossibilitytoworkbenches Foot control (onlyincombinationwithworkbenchoption) CE conform (CE according DIN EN 294)

Compact designOptionalexpansionstageupto20kN(weightapprox.6kg)

Technical Data:PunchingForce: 8 kNat 0,6 MPa (6 bar)

WorkingPressuremin.: 0,6MPa(6 bar)

WorkingPressuremax.: 1MPa(10 bar)

ReturnForce: 0,9kNMax. cross section:Aluminum: 27 mm^2Steel: 16 mm^2Weight: (approx.)4,5 kg

Description: Utility model - protected by law; patent pending Corresponds to CE according to DIN EN 294 (passing through openings)

Hydro-Pneumatic drive Open tools for comfortable operation Press cut of the opening for the inlet drive*

Reiplinger® GLS for triple hole punching installed on rotating mechanism*

Including foot control Incl. measurement device (1:1 & 1:2, measuring range = 2500 mm)

Including blowout pistol for easy waste removal Solidworkbench Expandabletoamulti-taskworkstation

Technical Data:Punching Force Handle-Hole Punching: 50kNat 0,6 MPa (6 bar) Punching Force Access Devices Punching: 13,1kNat 0,6 MPa (6 bar) WorkingPressuremin.: 0,4MPa(4 bar)

WorkingPressuremax.: 0,6MPa(6 bar)

Weight: (approx.)50 kgDimensions (W x L x H): (approx.) 1050 x 600 x 500 mm

BS - Multi - Max® BearbeitungstischFitting Punching machine for Machining of Driving Rods for Aluminum Windows

* after consultation

Technical Data:Punching Force at 0,6 MPa (6 bar): Matrix 28kNPushrod 18kNMaximum pressure 1 MPa (10 bar)

Return force: Matrixside 2,5kNPushrodside 1,4kNStandard hardware:16 x 2,5 + 10 x 3 60 mm2

Air consumption at 0,6 MPa (6 bar): (approx.) 4,2 NL/HubOil volume: (approx.) 125 cm3

Weight: (approx.) 12kgIncludingcontrols&accessories: 13,9kg

BS - Multi - Max® DUOPunching Machine for eccentric cut(additionally punching / embossing)

Description: Hydropneumatic drive Eccentric cut Open tool – direct access User friendly Safe (CE) Compact design Easy handling Operating pressure 0,6 – 1 MPa (6 - 10 bar)

Good waste removal Precise, hardened guide bushes Noiseless, almost burr-free cut Patented

Accessories Foot control Hand control Tables Measuring equipment Scale Slide gauge

Description: Hydro pneumatic drive (separatepressureintensifier) Very compact designSimpleinsertionoftheprofiles High level of safety (CE) punching corner joints and post Advantages: Conceived stop system allowsquickandeasyeditingof differentprofilewidths.

Accessories: Foot Control

Technical data:Punchforceat0,6MPa(6bar): 50 kNOperating Pressure min.: 0,6 MPa (6 bar)

Operating Pressure max.: 1 MPa (10 bar)

Multi - Max® ZyDu 50VssPunch for aluminum facings

Technical data:PunchForceat0,6MPa(6bar): 60 kNOperation Pressure min.: 0,6 MPa (6 bar)

Operation Pressure max.: 1 MPa (10 bar)

ZY DU100 H20-AE®

Reinforcing Punch to punch a wide variety of reinforcing bars thanks cassette principle.

Accessories: Foot control

Opt. Acces-sories: Scale Slider

Description: Hydro pneumatic drive Various reinforcing bars thankscassetteprinciple Also closed sections (possibly with additional hole punching) Simple insert by threading Advantages: no sawdust, no complicated clamps necessary time saving comparedtotheSaws,flexibledesignthanks separatepressureintensifier.

BS - Multi - Max® PS 100Punching machine for offset cut and straight cut(additionally punching / counter sunk)

Description: Tool with pneumatic zylinder Designed for small up to medium size production Open tool Easy access Anodic oxidation treated zylinder surfaces Enforced die plate Hardened guides Integrated blow out function Offsetcuts (additionallypunchung/countersunk) Straight cuts Tool change within 15 minutes CE conform

Accessories Foot switch Hand switch Scale Slider

Technical Data:PunchingForceat0,6MPa(6bar): 15 kNWorkingPressuremin.: 0,6MPa(6 bar)

WorkingPressuremax.: 1MPa(10 bar)

BS - Multi - Max® PS 100 Türbeschlagstanze Multi - Max® UBS / FBS 40Punching machine for door locks

Description: Smooth cutting because of hydro-pneumatic drive Hardened guides Open tool - direct access Tool already mounted to zylinder Anodic oxidation treated zylinder surfacesForU-andFlatlocks Cutting stainless steel

Accessories Foot switch Scale Slider

Technical Data:PunchingForceat0,6MPa(6bar): 40 kNWorkingPressuremin.: 0,55MPa(5,5 bar)

WorkingPressuremax.: 1MPa(10 bar)

Standard tools: U-lock 24x6and24x8 Flatlock 24x3

REIPLINGER GmbH & Co.KGIm Voigtstedter Feld 2 06528 Edersleben

Sales Office: Bahnhofstraße 31 . 54634 Bitburgfon: 0049 (0)6561/94 75 0 fax: 0049 (0)6561/94 75 10email:kontakt@reiplinger.comInternet: www.reiplinger.com