8/10/2019 Product Notice UniCoatPro Plasma Final

1/3

Product Notice 2014-7 1

ProAlkjljlkjljkjlj

Product Notice

To: Oerlikon Metco Sales Personnel and Distributors Issue Date: September 10th, 2014

From: Omar Sabouni PLM APS Index No: 05 Equipment Plasma APS

Number: 2014-7

Subject: Availability of the UniCoatProPlasma controller core packageAffects: New product Release

Oerlikon Metco is pleased to announce the availability of the UniCoatProplasma controller.

The UniCoatPro Plasma controller is a compact single process plasma controller featuring a large and intuitive color

touchscreen interface. Please refer to the [product datasheet]for more detailed information on features and options.

Available for quotation immediately the UniCoatPro Plasma will be available only as a core package consisting of:

UniCoatPro Plasma controller

Power supply

JAMBox

Spray gun

Twin-140 powder feeder for fully integrated feeder capability (other feeders with feed start/stop only)

The Systems group will independently manage customer needs for:

Booth (cabin) selections

Gun manipulation

Part handling interfaces

Dust/fume extraction

Water cooling equipment

UniCoatPro Plasma will notimmediately be available as a standalone component.

Sales process

Quotations will be supplied according to the existing core system model.

8/10/2019 Product Notice UniCoatPro Plasma Final

2/3

Product Notice 2014-07 2

Standard core package options

Controller The controller will be available as three standard gas configurations

Two GasArgon 200 l/m

Hydrogen20 l/m

Three GasArgon 200 l/m

Hydrogen 20 l/m

Nitrogen100 l/min

Four Gas

Argon 200 l/m

Hydrogen 20 l/m

Nitrogen 100 l/min

Helium50 l/min

Power supply Two power supply options will be available

Inverter PT3X

Thyristor PT1140

JAMBox and Guns There will be two separate JAMBox options. Option 1 will onlysup-

port conventional single electrode plasma guns. Option 2 will sup-

port both Conventional and single electrode Cascade guns.

Conventional9MB series

Supports 3MB/7MB

F4 Series

Cascade

SinplexPro series

Powder feeders Three feeder options are available. UniCoatPro Plasma can only

support a single Twin 140 series feeder (2 hoppers).

Twin 140 series

Includes full recipe integration with the

UniCoatPro Plasma controller.

Optional Heated hoppers managed by the

controller are available

9MP & 9MPESingle feeder with on/off capability man-aged from controller. A Second feeder can

be operated in parallel.

5MPESingle feeder with on/off capability man-

aged from controller. A Second feeder can

be operated in parallel.

Miscellaneous Cables, hoses and documentation to support the core package

8/10/2019 Product Notice UniCoatPro Plasma Final

3/3

Product Notice 2014-07 3

FAQs

Can a customer use their existing power supply?

With the exception of most TriStar power supplies the answer at date of publication is no. UniCoatPro Plasma uses

a signal directly from the power supply to measure voltage. Previously voltage measurements were made at the dis-tribution unit (9MCD) or JAM Box. The equipment group is looking at designing interfaces to support some earlier

and competitor power supplies.

Can I use other Metco and non-Metco plasma guns?

Currently only the SinplexPro, F4 series and 9MB series (3MB&7MB can also be used with this selection) are se-

lectable from the gun menu. Other guns such as the 8MB, iPro-90, F1, F100, F210 and F300 will be added to the

gun database once they are fully validated. Some competitor guns such as the SG-100 from Praxair may be added if

there is sufficient customer demand.

Can the UniCoatPro Plasma run TriplexPro?

No. UniCoatPro Plasma only supports single electrode guns.

Will EvoLink be available for the UniCoatPro Plasma controller?

No. Evolink as a concept is currently not being considered for integration into the UniCoatPro Plasma controller.

Action:

For informationand distribution