product news Inductive efectorm sensors for the automotive ...
2
fluid sensors and diagnostic systems position sensors networking and control the automotive/machine tool industries. Inductive efector m sensors for Types M12, M18 and M30 with long sensing ranges. product news Long sensing range The increased sensing range is ensured over the whole temperature range. It provides additional protection against failures caused by mechanical damage. Sensing ranges of 4 / 22 mm can be achieved with the new sensors. In practice this corresponds to a value which is up to 2 times higher in comparison to standard switches. M12 connector The connection is made via a robust M12 connector with integrated, clearly visible 4-port LED for indication of the output status. Universal use The sensors have the load current of 200 mA required by the automotive industry and a supply voltage of 10...36 V DC. With a total length of 60 mm and a thread area of 40 mm the sensors can be used universally. Absolutely ingress-resistant Long life is achieved due to a special design and additional seals as well as the use of a plastic which is resistant to oil, coolants and lubricants. All units of this series (C series) feature the protection rating IP 67 / IP 68 and protection class II. Future-proof The ifm sensors have been designed to be used over many years. This is also reflected by the details. Due to the cap- tive laser type label the units can still be clearly identified after years of operation. Increased sensing range for more plant uptime. IP 67 / IP 68 as well as resistant to aggressive oils and coolants. Permanently legible laser type label. High vibration and shock resistance. Total length: 60 mm, load current: 200 mA, supply voltage: 10...36 V DC. Position sensors
Transcript of product news Inductive efectorm sensors for the automotive ...
fluid sensorsand diagnostic
systems
positionsensors
networkingand control
the automotive/machine tool industries.Inductive efectorm sensors for
Types M12, M18 and M30 withlong sensing ranges.
product news
Long sensing rangeThe increased sensing range is ensured over the wholetemperature range. It provides additional protection againstfailures caused by mechanical damage. Sensing ranges of4 / 22 mm can be achieved with the new sensors.In practice this corresponds to a value which is up to 2times higher in comparison to standard switches.
M12 connectorThe connection is made via a robust M12 connector withintegrated, clearly visible 4-port LED for indication of theoutput status.
Universal useThe sensors have the load current of 200 mA required bythe automotive industry and a supply voltage of 10...36 VDC. With a total length of 60 mm and a thread area of 40mm the sensors can be used universally.
Absolutely ingress-resistantLong life is achieved due to a special design and additionalseals as well as the use of a plastic which is resistant to oil,coolants and lubricants. All units of this series (C series)feature the protection rating IP 67 / IP 68 and protectionclass II.
Future-proofThe ifm sensors have been designed to be used over manyyears. This is also reflected by the details. Due to the cap-tive laser type label the units can still be clearly identifiedafter years of operation.
Increased sensing rangefor more plant uptime.
IP 67 / IP 68 as well as resistantto aggressive oils and coolants.
Permanently legible laser type label.
High vibration and shock resistance.
Total length: 60 mm, load current:200 mA, supply voltage: 10...36 V DC.
Posi
tio
n s
enso
rs
E11047
E11048
E11049
E10735
E10736
E10737
E11533
E11534
E10906
E10900
E10903
E10907
E10901
E10904
ifm
ifm
ifm
ifm
ifm
ifm
Plastic mounting sleeve with end stop for type M12
Plastic mounting sleeve with end stop for type M18
Plastic mounting sleeve with end stop for type M30
Angle bracket for type M12, stainless steel
Angle bracket for type M18, stainless steel
Angle bracket for type M30, stainless steel
Mounting clip, O shaped, for type M12, stainless steel
Mounting clip, O shaped, for type M18, stainless steel
2 m (PUR), M12 straight, without LED
2 m (PUR), M12 angled, without LED
2 m (PUR), M12 angled, 3 LEDs
5 m (PUR), M12 straight, without LED
5 m (PUR), M12 angled, without LED
5 m (PUR), M12 angled, 3 LEDs
-25...70
IP 67 / IP 68 coolant; II
brass, coating white bronze (nickel-free)
LCP
60
M12 connector
EN 61000-4-2: 4 kV CD / 8 kV ADEN 61000-4-3: 10 V/m (80...1000 MHz)
EN 61000-4-4: 2 kVEN 61000-4-5: 0.5 kV
EN 61000-4-6: 10 V (0.15...80 MHz)EN 55011: class B
700
IFC229 IFC230 IGC221 IGC220 IIC206 IIC207
7 nf4 f 12 nf8 f 22 nf15 f
M12 M18 M30
Operating voltage [V]
Current rating [mA]
Short circuit protection, pulsed
Rev. polarity / overl. protection
Voltage drop [V]
Current consumption [mA]
Output status indication LED
Switching frequency [Hz]
Operating temperature [°C]
Protection
Housing material
Sensing face
Total length [mm]
Connection
EMC (automotive area)
10...36 DC
200
•
•
< 2.5
< 10
yellow (4 x 90°)
Output
Order no.
Nominal sensing range sn [mm]
Type
400 300 100
R
Applications:Proximity switches with excellent ingress-resistance for demanding applicationsin machine tools and automotive production.
4940
M12
x1
174
M12
x1
4-port-LED
60
DimensionsSockets
Sockettype Order no.Design
Accessories
Description Order no.
Example: IFC229
Electrical design
Connection
DC PNP
Visit our website: www.ifm-electronic.comWe
rese
rve
the
right
to
mak
e te
chni
cal a
ltera
tions
with
out
prio
r no
tice.
Prin
ted
in G
erm
any
on n
on-c
hlor
ine
blea
ched
pap
er. K
E129
/200
4Po
siti
on
sen
sors
Inductive, capacitive andmagnetic proximity switches
