Okop Usem Leadership Council: Resource Control/Resource Management By Dr Timothy E. Okon.
Product Line Overview Emerson eBusiness Solutions...
6
MOTORS Emerson ® and U.S. Motors ® Brand Full Line Product Overview INDUSTRIAL COMMERCIAL RESIDENTIAL
Transcript of Product Line Overview Emerson eBusiness Solutions...
MOJAVE™ Series Condenser Fans1 and 2 Speeds1/4 HP through 3/4 HPSleeve Bearings70° Ambient Design
RESCUE® MotorsReplaces a variety of different HP
applicationsGas or Electric Furnace motors
1/2 to 1/6 HP or 3/4 to 1/5 HP1075 RPM, 48 Frame
Condenser Fan Motors1/3 to 1/6 HP or 1/2 to 1/5 HP1075 RPM, 48 Frame
Condenser FansSingle and three phase, OAO and
TEAO1/10 HP through 2 HP1725, 1625, 1550, 1075 and 825 RPM 48 and 56 frameSingle and two speed
Fan and BlowerSingle phase, ODP, OAO and TEAO1/6 HP through 1-1/2 HP3450, 1725, 1075 and 825 RPMSingle, two, three and four speedBelt drive and direct drive
Evaporative CoolerSingle phase, ODP1/3 HP through 1 HP1725 RPM56 frameSingle and two speedCorrosion resistant rotor core and
actuator assembly
Unit HeaterSingle phase, TEAO1/15 HP through 3/4 HP1550 and 1075 RPM48 and 56 frameCradle and stud mount
Air Circulator MotorsSingle Phase, OAO and TEAO1/15, 1/10 HP and 1/4 through 1/2 HP1800, 1200, and 900 RPM42 through 56 frameSingle and two speed optionsOscillating and non-oscillating options
Air Circulator Heads andMounting Accessories
20, 24 and 30 inch blade diameter1/4 and 1/2 HP, two speed design motorsPull chain switch and grounded plugYoke mounted Oscillating and non-oscillating optionsAccessories available to vary mounting
positions
Room Air ConditionersSingle phase, OAO and TEAO1/10 HP through 3/4 HP1725 and 1075 RPM42 and 48 frameSingle, two, three, four and five speed Automatic reset thermal overload protector
Package Terminal A/C Heat PumpSingle phase, OAO1/30 HP through 3/4 HP1625, 1050, 1100 and 925 RPM5.0”, 5.6” and 6.3” diameterSingle, two, three and four speed
Oil BurnerSingle phase, Totally enclosed when
mounted1/8 HP through 1 HP3450 and 1725 RPM48 and 56 frameDirect OEM replacement for Beckett®†, Carlin®†,
Ducane®† and Wayne®† Home Oil Burner Systems
Draft Inducers - Blowers & Motors115 and 208-230 Volts1 and 2 SpeedsOEM Replacement for Goodman®†, ICP®†,
Carrier®†, Lennox®†, Armstrong®†
and Trane®†
©Emerson Motor Company, 3/08; All Rights ReservedFLB 2008 3/08
Emerson Motor Company8100 West Florissant Avenue • St. Louis, Missouri 63136
Phone: 888.637.7333Fax: 314.553.2087www.emersonmotors.comwww.usmotors.com
MOTORS
Emerson® and U.S. Motors® Brand
Full Line Product Overview
I N D U S T R I A L
C O M M E R C I A L
R E S I D E N T I A L
Emerson eBusiness SolutionsAs technology and customer needs change, Emerson respondsby providing state-of-the-art eBusiness systems that offer real-time solutions for customers. Whether you need to simplycheck stock availability or need detailed specifications,Emerson provides online information for you to access anytime,anywhere. Our eBusiness solutions package includes some ofthe most innovative solutions in the motor market today.
MOTORBOSS®
The Innovative Solution to Online Ordering.Available 24 hours a day, 7 days a week, 365 days a year, thiseasy-to-use system provides you real-time answers quickly. For more information, go to www.motorboss.com.
Emerson eCatalogGreat Expectations Require Great ResultsWith Emerson’s eCatalog, it is easier than ever to find theright motor to meet your needs. Fast and easy to use, theeCatalog provides details on all Emerson® and U.S. Motors®
brand stock motor ratings. For more information, go towww.usmotors.com/default_ecatalog.htm.
Emerson’s Library of Motor Cross ReferencesIf you are having trouble finding a replacement motor for anOEM or a competitor model or catalog number, Emerson’scross referencing tool has over 50,000 cross references to some of the most popular part numbers. Log on today to find areplacement motor at www.usmotors.com/default_ecatalog.htm.
Emerson, Your Guide to MOTORPRO® TrainingThe MOTORPRO® training program provides a fun, interactivetool to explain electric motors. With MOTORPRO® training, youcan learn at your own pace and earn a certificate of completion.Sign on today at www.usmotors.com/motorpro to become amotor professional!
† All non-Emerson Electric Co. marks shown within this document are properties of their other respective owners.
Product Line OverviewHVAC Products - Commercial & Residential
Vector DutyThree phase, TENV and TEBC1 HP through 15 HP (TENV)1 HP through 300 HP (TEBC)143 through 449 frame0-1800 RPMConstant torque near zero RPM ACCU-Torq™ 2000:1Three-year limited warranty on inverter power* Constant Torque
Inverter DutyThree phase, ODP and TEFC1 HP through 200 HP3600, 1800 and 1200 RPM143 through 447 frameMeets NEMA®† MG1 Part 31 requirements
for inverter duty
Hot Water Circulator PumpSingle and three phase, ODP1/12 HP through 1-1/2 HP1800 RPM48 and 56 frameDirect replacement motor for B&G®†
(Bell & Gossett), Taco®† and Thrush™† brand circulator pumps
Carbonator PumpSingle phase, ODP1/4 HP through 1/2 HP1800 RPM48 frame
Air CompressorSingle phase, ODP1/2 HP through 5 HP3600 RPM56, 143 and 184 frameHigh breakdown torque
Gate and Door MotorsSingle and Three phase, ODP and TEFC1/3 HP through 1 HP1800 RPM56 and 56C frames
Brake MotorThree Phase, TEFC with Brake Added1/3 HP through 20 HP1800 and 1200 RPM56 through 256 frameRigid base, C- face, footed and footless
Farm DutySingle and three phase, TEFC1/8 HP through 10 HP3600 and 1800 RPM56 through 215 frameHigh torque or extra high torque
Automotive Duty, U-frame Three phase, TEFC1/4 HP through 300 HP3600, 1800, 1200 and 900 RPM56 through 5008 frameMeets General Motors®† GM-7EQ &
GM-7EH, Ford®† EM1, and Chrysler®† NPEM-105 spec
Fire Pump MotorThree phase, ODP7-1/2 HP through 250 HP3600 and 1800 RPM184 through 445 frameUL®† listed for fire pump application Available in horizontal frame and vertical JP close couple pumps
Commercial and Residential Water System Pumps
Single and three phase, ODP and TEFC1/3 HP through 3 HP3600 and 1800 RPM48 and 56 frameC-Face, square flange and sump pumpFooted and footless
Pool and Spa MotorSingle and three phase, ODP1/2 HP through 5 HP3600 RPM48 and 56 frameThru-bolt, c- face and square flangeUL®† 1081, 1795 and 1563 design
Vertical Pump MotorsThree phase, WPI, WPII, TEFC and
Hazardous Location3 HP through 4000 HP3600, 1800, 1200, 900, 720, 600 and 514 RPM182 though 6810 frameDesigned for high or normal thrustAvailable in vertical hollowshaft and
vertical solid shaft
Close Couple PumpSingle and three phase, ODP,
TEFC and Hazardous Location1 HP through 60 HP3600 and 1800 RPM143 through 326 frameJM and JP shafts available
IEC MotorsThree phase, TEFC1/3 HP through 200 HP3600 and 1800 RPM71 through 315 frameMeets IP55 and metric standardsEnergy Efficient
Elevator DutySingle and three phaseSubmersible and dry hydraulic3 HP through 75 HP3600, 1800 and 1200 RPMZ and L32 flange mounting
Refrigeration MotorsThree phase, TEAO3/4 HP through 7.5 HP1800 and 1200 RPM56 to 254 frameLow temp bearing grease to -50°CInverter Duty
VARIDRIVE® Adjustable Speed DriveMechanical adjustable speed driveGear output and gearless design options6 through 25 frame case4278-428 to 3600-450 max speed rangesManual hand wheel speed controller
Cooling Tower Three phase, TEFC and TEAO2 HP through 100 HP1800, 1200, 1800/900 and 1200/600 RPM145 through 447 frameSingle speed and two speedEnergy efficient and NEMA Premium®†/inverter dutyMeets specifications for Baltimore Aircoil Company®†,
Evapco®† and Marley®† cooling tower motors
Painted WashdownSingle and three phase, TEFC1/2 HP through 10 HP3450, 1725 and 1150 RPM56 through 215 frameFoot mounted, c- face footed and
footless
Paint Free WashdownThree phase, TENV1/2 HP through 10 HP1725 RPM56HC through 145TC frameVBX®† bearing isolators by Inpro/Seal®†
Inverter Duty
Stainless Steel WashdownThree phase, TENV and TEFC1/2 HP through 2 HP1750 RPM56HC through 145TC frameAll stainless steel constructionRust inhibitor on stator and rotor
VARIDYNE® 2 Variable Frequency DriveElectrical adjustable frequency drive1 to 200 HP (0.75 to 132 kW)Open Loop Vector Control: Speed or Torque3k Hz to 18k Hz Switching Frequency RangeIP20 NEMA-1®† Enclosure
Single Phase, Split Phase, ODP and TEFC1/12 HP through 3/4 HP3600, 1800, 1200 and 900 RPM48 through 56 frameRigid welded and cradle basesSingle and two speed optionsC- face footed and footlessAutomatic or manual reset thermal overload protector options
Single Phase, Capacitor Start, ODP and TEFC1/8 HP through 10 HP3600, 1800 and 1200 RPM48 through 215 frameRigid welded and cradle basesC- face footed and footlessAutomatic or manual reset thermal overload
protector options
Three Phase, ODP1/4 HP through 400 HP3600, 1800, 1200 and 900 RPM48 through 449 frameEnergy and NEMA Premium®† efficient
Three Phase, ODP and TEFC, U FrameLight industrial applications1 HP through 10 HP3600, 1800 and 1200 RPM182 through 256U frameStandard efficient
Three Phase, TEFC, UNIMOUNT®
1/4 HP through 30 HP3600, 1800, 1200 and 900 RPM56 through 286 frameEnergy and NEMA Premium®† efficientC- face, footed and footless and removable base
C-Face: ODP, TEFC and Hazardous LocationSingle Phase, Split Phase and
Capacitor StartThree Phase, footed and footless options1/12 HP through 60 HP3600, 1800 and 1200 RPM56 through 326 frameStandard, Energy and Premium Efficient
Three Phase, TEFC, e-LINE®
1 HP through 250 HP3600, 1800 and 1200 RPM140 through 449 frameAll cast iron constructionEnergy efficientFooted and C-Face Footed
Three Phase, TEFC, Hostile Duty1 HP through 350 HP3600, 1800, 1200 and 900 RPM143 through 449 frameEnergy and NEMA Premium®† efficientCast iron frame and bracketsBall and roller bearing options
Three Phase, TEFC, CORRO-DUTY®
1 HP through 200 HP3600, 1800 and 1200 RPM143 through 447 frameAll cast iron constructionNEMA Premium®† efficient
Three Phase, TEFC, 841 PLUS®
1 HP through 400 HP3600, 1800 and 1200 RPM143 through 447 frameVBXX®† bearing isolators by
Inpro/Seal®† helps protect bearingsMeets IEEE®† 841 GM7E-TA specificationsFive-year limited warranty*NEMA Premium®† efficient
Hazardous Location Single and three phase, TEFC1/4 HP through 150 HP3600, 1800, 1200 and 900 RPM56 through 445 frameEnergy and premium efficientClass I Group D; Class I, Groups C and D, and
Class II, Groups E, F, and G
TITAN® HorizontalThree phase, ODP, WPI, WPII, TEFC
and Hazardous Location150 HP through 4000 HP3600, 1800, 1200, 900, 720 and 600 RPM449 through 9608 frame460 through 6600 voltsBall or sleeve bearings available
† All non-Emerson Electric Co. marks shown within this document are properties of their other respective owners. *For details, refer to: http://www.usmotors.com/FL600/LimitedWarranty.pdf † All non-Emerson Electric Co. marks shown within this document are properties of their other respective owners. *For details, refer to: http://www.usmotors.com/FL600/LimitedWarranty.pdf † All non-Emerson Electric Co. marks shown within this document are properties of their other respective owners.
Product Line OverviewDefinite Purpose Motors
Product Line OverviewGeneral Purpose Industrial Motors
Product Line OverviewSpecial Purpose Products
Vector DutyThree phase, TENV and TEBC1 HP through 15 HP (TENV)1 HP through 300 HP (TEBC)143 through 449 frame0-1800 RPMConstant torque near zero RPM ACCU-Torq™ 2000:1Three-year limited warranty on inverter power* Constant Torque
Inverter DutyThree phase, ODP and TEFC1 HP through 200 HP3600, 1800 and 1200 RPM143 through 447 frameMeets NEMA®† MG1 Part 31 requirements
for inverter duty
Hot Water Circulator PumpSingle and three phase, ODP1/12 HP through 1-1/2 HP1800 RPM48 and 56 frameDirect replacement motor for B&G®†
(Bell & Gossett), Taco®† and Thrush™† brand circulator pumps
Carbonator PumpSingle phase, ODP1/4 HP through 1/2 HP1800 RPM48 frame
Air CompressorSingle phase, ODP1/2 HP through 5 HP3600 RPM56, 143 and 184 frameHigh breakdown torque
Gate and Door MotorsSingle and Three phase, ODP and TEFC1/3 HP through 1 HP1800 RPM56 and 56C frames
Brake MotorThree Phase, TEFC with Brake Added1/3 HP through 20 HP1800 and 1200 RPM56 through 256 frameRigid base, C- face, footed and footless
Farm DutySingle and three phase, TEFC1/8 HP through 10 HP3600 and 1800 RPM56 through 215 frameHigh torque or extra high torque
Automotive Duty, U-frame Three phase, TEFC1/4 HP through 300 HP3600, 1800, 1200 and 900 RPM56 through 5008 frameMeets General Motors®† GM-7EQ &
GM-7EH, Ford®† EM1, and Chrysler®† NPEM-105 spec
Fire Pump MotorThree phase, ODP7-1/2 HP through 250 HP3600 and 1800 RPM184 through 445 frameUL®† listed for fire pump application Available in horizontal frame and vertical JP close couple pumps
Commercial and Residential Water System Pumps
Single and three phase, ODP and TEFC1/3 HP through 3 HP3600 and 1800 RPM48 and 56 frameC-Face, square flange and sump pumpFooted and footless
Pool and Spa MotorSingle and three phase, ODP1/2 HP through 5 HP3600 RPM48 and 56 frameThru-bolt, c- face and square flangeUL®† 1081, 1795 and 1563 design
Vertical Pump MotorsThree phase, WPI, WPII, TEFC and
Hazardous Location3 HP through 4000 HP3600, 1800, 1200, 900, 720, 600 and 514 RPM182 though 6810 frameDesigned for high or normal thrustAvailable in vertical hollowshaft and
vertical solid shaft
Close Couple PumpSingle and three phase, ODP,
TEFC and Hazardous Location1 HP through 60 HP3600 and 1800 RPM143 through 326 frameJM and JP shafts available
IEC MotorsThree phase, TEFC1/3 HP through 200 HP3600 and 1800 RPM71 through 315 frameMeets IP55 and metric standardsEnergy Efficient
Elevator DutySingle and three phaseSubmersible and dry hydraulic3 HP through 75 HP3600, 1800 and 1200 RPMZ and L32 flange mounting
Refrigeration MotorsThree phase, TEAO3/4 HP through 7.5 HP1800 and 1200 RPM56 to 254 frameLow temp bearing grease to -50°CInverter Duty
VARIDRIVE® Adjustable Speed DriveMechanical adjustable speed driveGear output and gearless design options6 through 25 frame case4278-428 to 3600-450 max speed rangesManual hand wheel speed controller
Cooling Tower Three phase, TEFC and TEAO2 HP through 100 HP1800, 1200, 1800/900 and 1200/600 RPM145 through 447 frameSingle speed and two speedEnergy efficient and NEMA Premium®†/inverter dutyMeets specifications for Baltimore Aircoil Company®†,
Evapco®† and Marley®† cooling tower motors
Painted WashdownSingle and three phase, TEFC1/2 HP through 10 HP3450, 1725 and 1150 RPM56 through 215 frameFoot mounted, c- face footed and
footless
Paint Free WashdownThree phase, TENV1/2 HP through 10 HP1725 RPM56HC through 145TC frameVBX®† bearing isolators by Inpro/Seal®†
Inverter Duty
Stainless Steel WashdownThree phase, TENV and TEFC1/2 HP through 2 HP1750 RPM56HC through 145TC frameAll stainless steel constructionRust inhibitor on stator and rotor
VARIDYNE® 2 Variable Frequency DriveElectrical adjustable frequency drive1 to 200 HP (0.75 to 132 kW)Open Loop Vector Control: Speed or Torque3k Hz to 18k Hz Switching Frequency RangeIP20 NEMA-1®† Enclosure
Single Phase, Split Phase, ODP and TEFC1/12 HP through 3/4 HP3600, 1800, 1200 and 900 RPM48 through 56 frameRigid welded and cradle basesSingle and two speed optionsC- face footed and footlessAutomatic or manual reset thermal overload protector options
Single Phase, Capacitor Start, ODP and TEFC1/8 HP through 10 HP3600, 1800 and 1200 RPM48 through 215 frameRigid welded and cradle basesC- face footed and footlessAutomatic or manual reset thermal overload
protector options
Three Phase, ODP1/4 HP through 400 HP3600, 1800, 1200 and 900 RPM48 through 449 frameEnergy and NEMA Premium®† efficient
Three Phase, ODP and TEFC, U FrameLight industrial applications1 HP through 10 HP3600, 1800 and 1200 RPM182 through 256U frameStandard efficient
Three Phase, TEFC, UNIMOUNT®
1/4 HP through 30 HP3600, 1800, 1200 and 900 RPM56 through 286 frameEnergy and NEMA Premium®† efficientC- face, footed and footless and removable base
C-Face: ODP, TEFC and Hazardous LocationSingle Phase, Split Phase and
Capacitor StartThree Phase, footed and footless options1/12 HP through 60 HP3600, 1800 and 1200 RPM56 through 326 frameStandard, Energy and Premium Efficient
Three Phase, TEFC, e-LINE®
1 HP through 250 HP3600, 1800 and 1200 RPM140 through 449 frameAll cast iron constructionEnergy efficientFooted and C-Face Footed
Three Phase, TEFC, Hostile Duty1 HP through 350 HP3600, 1800, 1200 and 900 RPM143 through 449 frameEnergy and NEMA Premium®† efficientCast iron frame and bracketsBall and roller bearing options
Three Phase, TEFC, CORRO-DUTY®
1 HP through 200 HP3600, 1800 and 1200 RPM143 through 447 frameAll cast iron constructionNEMA Premium®† efficient
Three Phase, TEFC, 841 PLUS®
1 HP through 400 HP3600, 1800 and 1200 RPM143 through 447 frameVBXX®† bearing isolators by
Inpro/Seal®† helps protect bearingsMeets IEEE®† 841 GM7E-TA specificationsFive-year limited warranty*NEMA Premium®† efficient
Hazardous Location Single and three phase, TEFC1/4 HP through 150 HP3600, 1800, 1200 and 900 RPM56 through 445 frameEnergy and premium efficientClass I Group D; Class I, Groups C and D, and
Class II, Groups E, F, and G
TITAN® HorizontalThree phase, ODP, WPI, WPII, TEFC
and Hazardous Location150 HP through 4000 HP3600, 1800, 1200, 900, 720 and 600 RPM449 through 9608 frame460 through 6600 voltsBall or sleeve bearings available
† All non-Emerson Electric Co. marks shown within this document are properties of their other respective owners. *For details, refer to: http://www.usmotors.com/FL600/LimitedWarranty.pdf † All non-Emerson Electric Co. marks shown within this document are properties of their other respective owners. *For details, refer to: http://www.usmotors.com/FL600/LimitedWarranty.pdf † All non-Emerson Electric Co. marks shown within this document are properties of their other respective owners.
Product Line OverviewDefinite Purpose Motors
Product Line OverviewGeneral Purpose Industrial Motors
Product Line OverviewSpecial Purpose Products
Vector DutyThree phase, TENV and TEBC1 HP through 15 HP (TENV)1 HP through 300 HP (TEBC)143 through 449 frame0-1800 RPMConstant torque near zero RPM ACCU-Torq™ 2000:1Three-year limited warranty on inverter power* Constant Torque
Inverter DutyThree phase, ODP and TEFC1 HP through 200 HP3600, 1800 and 1200 RPM143 through 447 frameMeets NEMA®† MG1 Part 31 requirements
for inverter duty
Hot Water Circulator PumpSingle and three phase, ODP1/12 HP through 1-1/2 HP1800 RPM48 and 56 frameDirect replacement motor for B&G®†
(Bell & Gossett), Taco®† and Thrush™† brand circulator pumps
Carbonator PumpSingle phase, ODP1/4 HP through 1/2 HP1800 RPM48 frame
Air CompressorSingle phase, ODP1/2 HP through 5 HP3600 RPM56, 143 and 184 frameHigh breakdown torque
Gate and Door MotorsSingle and Three phase, ODP and TEFC1/3 HP through 1 HP1800 RPM56 and 56C frames
Brake MotorThree Phase, TEFC with Brake Added1/3 HP through 20 HP1800 and 1200 RPM56 through 256 frameRigid base, C- face, footed and footless
Farm DutySingle and three phase, TEFC1/8 HP through 10 HP3600 and 1800 RPM56 through 215 frameHigh torque or extra high torque
Automotive Duty, U-frame Three phase, TEFC1/4 HP through 300 HP3600, 1800, 1200 and 900 RPM56 through 5008 frameMeets General Motors®† GM-7EQ &
GM-7EH, Ford®† EM1, and Chrysler®† NPEM-105 spec
Fire Pump MotorThree phase, ODP7-1/2 HP through 250 HP3600 and 1800 RPM184 through 445 frameUL®† listed for fire pump application Available in horizontal frame and vertical JP close couple pumps
Commercial and Residential Water System Pumps
Single and three phase, ODP and TEFC1/3 HP through 3 HP3600 and 1800 RPM48 and 56 frameC-Face, square flange and sump pumpFooted and footless
Pool and Spa MotorSingle and three phase, ODP1/2 HP through 5 HP3600 RPM48 and 56 frameThru-bolt, c- face and square flangeUL®† 1081, 1795 and 1563 design
Vertical Pump MotorsThree phase, WPI, WPII, TEFC and
Hazardous Location3 HP through 4000 HP3600, 1800, 1200, 900, 720, 600 and 514 RPM182 though 6810 frameDesigned for high or normal thrustAvailable in vertical hollowshaft and
vertical solid shaft
Close Couple PumpSingle and three phase, ODP,
TEFC and Hazardous Location1 HP through 60 HP3600 and 1800 RPM143 through 326 frameJM and JP shafts available
IEC MotorsThree phase, TEFC1/3 HP through 200 HP3600 and 1800 RPM71 through 315 frameMeets IP55 and metric standardsEnergy Efficient
Elevator DutySingle and three phaseSubmersible and dry hydraulic3 HP through 75 HP3600, 1800 and 1200 RPMZ and L32 flange mounting
Refrigeration MotorsThree phase, TEAO3/4 HP through 7.5 HP1800 and 1200 RPM56 to 254 frameLow temp bearing grease to -50°CInverter Duty
VARIDRIVE® Adjustable Speed DriveMechanical adjustable speed driveGear output and gearless design options6 through 25 frame case4278-428 to 3600-450 max speed rangesManual hand wheel speed controller
Cooling Tower Three phase, TEFC and TEAO2 HP through 100 HP1800, 1200, 1800/900 and 1200/600 RPM145 through 447 frameSingle speed and two speedEnergy efficient and NEMA Premium®†/inverter dutyMeets specifications for Baltimore Aircoil Company®†,
Evapco®† and Marley®† cooling tower motors
Painted WashdownSingle and three phase, TEFC1/2 HP through 10 HP3450, 1725 and 1150 RPM56 through 215 frameFoot mounted, c- face footed and
footless
Paint Free WashdownThree phase, TENV1/2 HP through 10 HP1725 RPM56HC through 145TC frameVBX®† bearing isolators by Inpro/Seal®†
Inverter Duty
Stainless Steel WashdownThree phase, TENV and TEFC1/2 HP through 2 HP1750 RPM56HC through 145TC frameAll stainless steel constructionRust inhibitor on stator and rotor
VARIDYNE® 2 Variable Frequency DriveElectrical adjustable frequency drive1 to 200 HP (0.75 to 132 kW)Open Loop Vector Control: Speed or Torque3k Hz to 18k Hz Switching Frequency RangeIP20 NEMA-1®† Enclosure
Single Phase, Split Phase, ODP and TEFC1/12 HP through 3/4 HP3600, 1800, 1200 and 900 RPM48 through 56 frameRigid welded and cradle basesSingle and two speed optionsC- face footed and footlessAutomatic or manual reset thermal overload protector options
Single Phase, Capacitor Start, ODP and TEFC1/8 HP through 10 HP3600, 1800 and 1200 RPM48 through 215 frameRigid welded and cradle basesC- face footed and footlessAutomatic or manual reset thermal overload
protector options
Three Phase, ODP1/4 HP through 400 HP3600, 1800, 1200 and 900 RPM48 through 449 frameEnergy and NEMA Premium®† efficient
Three Phase, ODP and TEFC, U FrameLight industrial applications1 HP through 10 HP3600, 1800 and 1200 RPM182 through 256U frameStandard efficient
Three Phase, TEFC, UNIMOUNT®
1/4 HP through 30 HP3600, 1800, 1200 and 900 RPM56 through 286 frameEnergy and NEMA Premium®† efficientC- face, footed and footless and removable base
C-Face: ODP, TEFC and Hazardous LocationSingle Phase, Split Phase and
Capacitor StartThree Phase, footed and footless options1/12 HP through 60 HP3600, 1800 and 1200 RPM56 through 326 frameStandard, Energy and Premium Efficient
Three Phase, TEFC, e-LINE®
1 HP through 250 HP3600, 1800 and 1200 RPM140 through 449 frameAll cast iron constructionEnergy efficientFooted and C-Face Footed
Three Phase, TEFC, Hostile Duty1 HP through 350 HP3600, 1800, 1200 and 900 RPM143 through 449 frameEnergy and NEMA Premium®† efficientCast iron frame and bracketsBall and roller bearing options
Three Phase, TEFC, CORRO-DUTY®
1 HP through 200 HP3600, 1800 and 1200 RPM143 through 447 frameAll cast iron constructionNEMA Premium®† efficient
Three Phase, TEFC, 841 PLUS®
1 HP through 400 HP3600, 1800 and 1200 RPM143 through 447 frameVBXX®† bearing isolators by
Inpro/Seal®† helps protect bearingsMeets IEEE®† 841 GM7E-TA specificationsFive-year limited warranty*NEMA Premium®† efficient
Hazardous Location Single and three phase, TEFC1/4 HP through 150 HP3600, 1800, 1200 and 900 RPM56 through 445 frameEnergy and premium efficientClass I Group D; Class I, Groups C and D, and
Class II, Groups E, F, and G
TITAN® HorizontalThree phase, ODP, WPI, WPII, TEFC
and Hazardous Location150 HP through 4000 HP3600, 1800, 1200, 900, 720 and 600 RPM449 through 9608 frame460 through 6600 voltsBall or sleeve bearings available
† All non-Emerson Electric Co. marks shown within this document are properties of their other respective owners. *For details, refer to: http://www.usmotors.com/FL600/LimitedWarranty.pdf † All non-Emerson Electric Co. marks shown within this document are properties of their other respective owners. *For details, refer to: http://www.usmotors.com/FL600/LimitedWarranty.pdf † All non-Emerson Electric Co. marks shown within this document are properties of their other respective owners.
Product Line OverviewDefinite Purpose Motors
Product Line OverviewGeneral Purpose Industrial Motors
Product Line OverviewSpecial Purpose Products
MOJAVE™ Series Condenser Fans1 and 2 Speeds1/4 HP through 3/4 HPSleeve Bearings70° Ambient Design
RESCUE® MotorsReplaces a variety of different HP
applicationsGas or Electric Furnace motors
1/2 to 1/6 HP or 3/4 to 1/5 HP1075 RPM, 48 Frame
Condenser Fan Motors1/3 to 1/6 HP or 1/2 to 1/5 HP1075 RPM, 48 Frame
Condenser FansSingle and three phase, OAO and
TEAO1/10 HP through 2 HP1725, 1625, 1550, 1075 and 825 RPM 48 and 56 frameSingle and two speed
Fan and BlowerSingle phase, ODP, OAO and TEAO1/6 HP through 1-1/2 HP3450, 1725, 1075 and 825 RPMSingle, two, three and four speedBelt drive and direct drive
Evaporative CoolerSingle phase, ODP1/3 HP through 1 HP1725 RPM56 frameSingle and two speedCorrosion resistant rotor core and
actuator assembly
Unit HeaterSingle phase, TEAO1/15 HP through 3/4 HP1550 and 1075 RPM48 and 56 frameCradle and stud mount
Air Circulator MotorsSingle Phase, OAO and TEAO1/15, 1/10 HP and 1/4 through 1/2 HP1800, 1200, and 900 RPM42 through 56 frameSingle and two speed optionsOscillating and non-oscillating options
Air Circulator Heads andMounting Accessories
20, 24 and 30 inch blade diameter1/4 and 1/2 HP, two speed design motorsPull chain switch and grounded plugYoke mounted Oscillating and non-oscillating optionsAccessories available to vary mounting
positions
Room Air ConditionersSingle phase, OAO and TEAO1/10 HP through 3/4 HP1725 and 1075 RPM42 and 48 frameSingle, two, three, four and five speed Automatic reset thermal overload protector
Package Terminal A/C Heat PumpSingle phase, OAO1/30 HP through 3/4 HP1625, 1050, 1100 and 925 RPM5.0”, 5.6” and 6.3” diameterSingle, two, three and four speed
Oil BurnerSingle phase, Totally enclosed when
mounted1/8 HP through 1 HP3450 and 1725 RPM48 and 56 frameDirect OEM replacement for Beckett®†, Carlin®†,
Ducane®† and Wayne®† Home Oil Burner Systems
Draft Inducers - Blowers & Motors115 and 208-230 Volts1 and 2 SpeedsOEM Replacement for Goodman®†, ICP®†,
Carrier®†, Lennox®†, Armstrong®†
and Trane®†
©Emerson Motor Company, 3/08; All Rights ReservedFLB 2008 3/08
Emerson Motor Company8100 West Florissant Avenue • St. Louis, Missouri 63136
Phone: 888.637.7333Fax: 314.553.2087www.emersonmotors.comwww.usmotors.com
MOTORS
Emerson® and U.S. Motors® Brand
Full Line Product Overview
I N D U S T R I A L
C O M M E R C I A L
R E S I D E N T I A L
Emerson eBusiness SolutionsAs technology and customer needs change, Emerson respondsby providing state-of-the-art eBusiness systems that offer real-time solutions for customers. Whether you need to simplycheck stock availability or need detailed specifications,Emerson provides online information for you to access anytime,anywhere. Our eBusiness solutions package includes some ofthe most innovative solutions in the motor market today.
MOTORBOSS®
The Innovative Solution to Online Ordering.Available 24 hours a day, 7 days a week, 365 days a year, thiseasy-to-use system provides you real-time answers quickly. For more information, go to www.motorboss.com.
Emerson eCatalogGreat Expectations Require Great ResultsWith Emerson’s eCatalog, it is easier than ever to find theright motor to meet your needs. Fast and easy to use, theeCatalog provides details on all Emerson® and U.S. Motors®
brand stock motor ratings. For more information, go towww.usmotors.com/default_ecatalog.htm.
Emerson’s Library of Motor Cross ReferencesIf you are having trouble finding a replacement motor for anOEM or a competitor model or catalog number, Emerson’scross referencing tool has over 50,000 cross references to some of the most popular part numbers. Log on today to find areplacement motor at www.usmotors.com/default_ecatalog.htm.
Emerson, Your Guide to MOTORPRO® TrainingThe MOTORPRO® training program provides a fun, interactivetool to explain electric motors. With MOTORPRO® training, youcan learn at your own pace and earn a certificate of completion.Sign on today at www.usmotors.com/motorpro to become amotor professional!
† All non-Emerson Electric Co. marks shown within this document are properties of their other respective owners.
Product Line OverviewHVAC Products - Commercial & Residential
MOJAVE™ Series Condenser Fans1 and 2 Speeds1/4 HP through 3/4 HPSleeve Bearings70° Ambient Design
RESCUE® MotorsReplaces a variety of different HP
applicationsGas or Electric Furnace motors
1/2 to 1/6 HP or 3/4 to 1/5 HP1075 RPM, 48 Frame
Condenser Fan Motors1/3 to 1/6 HP or 1/2 to 1/5 HP1075 RPM, 48 Frame
Condenser FansSingle and three phase, OAO and
TEAO1/10 HP through 2 HP1725, 1625, 1550, 1075 and 825 RPM 48 and 56 frameSingle and two speed
Fan and BlowerSingle phase, ODP, OAO and TEAO1/6 HP through 1-1/2 HP3450, 1725, 1075 and 825 RPMSingle, two, three and four speedBelt drive and direct drive
Evaporative CoolerSingle phase, ODP1/3 HP through 1 HP1725 RPM56 frameSingle and two speedCorrosion resistant rotor core and
actuator assembly
Unit HeaterSingle phase, TEAO1/15 HP through 3/4 HP1550 and 1075 RPM48 and 56 frameCradle and stud mount
Air Circulator MotorsSingle Phase, OAO and TEAO1/15, 1/10 HP and 1/4 through 1/2 HP1800, 1200, and 900 RPM42 through 56 frameSingle and two speed optionsOscillating and non-oscillating options
Air Circulator Heads andMounting Accessories
20, 24 and 30 inch blade diameter1/4 and 1/2 HP, two speed design motorsPull chain switch and grounded plugYoke mounted Oscillating and non-oscillating optionsAccessories available to vary mounting
positions
Room Air ConditionersSingle phase, OAO and TEAO1/10 HP through 3/4 HP1725 and 1075 RPM42 and 48 frameSingle, two, three, four and five speed Automatic reset thermal overload protector
Package Terminal A/C Heat PumpSingle phase, OAO1/30 HP through 3/4 HP1625, 1050, 1100 and 925 RPM5.0”, 5.6” and 6.3” diameterSingle, two, three and four speed
Oil BurnerSingle phase, Totally enclosed when
mounted1/8 HP through 1 HP3450 and 1725 RPM48 and 56 frameDirect OEM replacement for Beckett®†, Carlin®†,
Ducane®† and Wayne®† Home Oil Burner Systems
Draft Inducers - Blowers & Motors115 and 208-230 Volts1 and 2 SpeedsOEM Replacement for Goodman®†, ICP®†,
Carrier®†, Lennox®†, Armstrong®†
and Trane®†
©Emerson Motor Company, 3/08; All Rights ReservedFLB 2008 3/08
Emerson Motor Company8100 West Florissant Avenue • St. Louis, Missouri 63136
Phone: 888.637.7333Fax: 314.553.2087www.emersonmotors.comwww.usmotors.com
MOTORS
Emerson® and U.S. Motors® Brand
Full Line Product Overview
I N D U S T R I A L
C O M M E R C I A L
R E S I D E N T I A L
Emerson eBusiness SolutionsAs technology and customer needs change, Emerson respondsby providing state-of-the-art eBusiness systems that offer real-time solutions for customers. Whether you need to simplycheck stock availability or need detailed specifications,Emerson provides online information for you to access anytime,anywhere. Our eBusiness solutions package includes some ofthe most innovative solutions in the motor market today.
MOTORBOSS®
The Innovative Solution to Online Ordering.Available 24 hours a day, 7 days a week, 365 days a year, thiseasy-to-use system provides you real-time answers quickly. For more information, go to www.motorboss.com.
Emerson eCatalogGreat Expectations Require Great ResultsWith Emerson’s eCatalog, it is easier than ever to find theright motor to meet your needs. Fast and easy to use, theeCatalog provides details on all Emerson® and U.S. Motors®
brand stock motor ratings. For more information, go towww.usmotors.com/default_ecatalog.htm.
Emerson’s Library of Motor Cross ReferencesIf you are having trouble finding a replacement motor for anOEM or a competitor model or catalog number, Emerson’scross referencing tool has over 50,000 cross references to some of the most popular part numbers. Log on today to find areplacement motor at www.usmotors.com/default_ecatalog.htm.
Emerson, Your Guide to MOTORPRO® TrainingThe MOTORPRO® training program provides a fun, interactivetool to explain electric motors. With MOTORPRO® training, youcan learn at your own pace and earn a certificate of completion.Sign on today at www.usmotors.com/motorpro to become amotor professional!
† All non-Emerson Electric Co. marks shown within this document are properties of their other respective owners.
Product Line OverviewHVAC Products - Commercial & Residential
