Product Knowledge Guide - Solmetex, LLC€¦ · Product Knowledge Guide Position for right or left...
Transcript of Product Knowledge Guide - Solmetex, LLC€¦ · Product Knowledge Guide Position for right or left...
NXT Hg5 Series of Amalgam Separators
TM
Key Points
New compact designFor hard-to-�t spaces1
Market leader in the industryISO 11143:2008 certi�ed2
Easy to operate• No tools necessary• No daily maintenance• No decanting
3
Easy collection container change outSimple to change either by dentalprofessional or technician
4
Extends life of vacuum systemWet Ring Pumps - By collecting solids and sediment, the NXT Hg5 saves on the purchase of pinnacle traps and reduces the wear caused by solids passing through the wet ring pumps
Dry Vacuums - Reduces sludge build up in the air-water separator tank of a dry vacuum system. Less time and money spent on maintenance and repair to the vacuum system
7
5• Install before pump on wet vacuum systems
• Install before tank on dry vacuum systems
Functional with both wet anddry vacuum systems
8No additional charge for recyclingEasy mail-back service
9Available online 24/7
Certi�cates of recycling
Better for the environmentRemoves approximately 4,400 lbs of mercury from waste streams every year while also saving approximately 130 billion gallons of water
Eco-friendly packaging, 100% recyclable
No contracts or hidden fees
Certificates of ComplianceAvailable on our website 24/7
Certification: ISO 11143:2008Easy mail-back recycling programShipping and recycling included in cost
Extends the life of the vacuum systemPrevents particulates from passing though the wet vacuum pump, protecting the pump from unnecessary wear and tear and potential repair costs
Product Knowledge Guide
Position for right or left orientation 6Flexible installation
Troubleshooting NXT Hg5 Systems
TM
Solids reachfull line of collection container
Problem
Top chamber has some
solids
Problem
Top chamberis filled
with solids
ProblemTop chamber
has some solids; container
not full
ProblemSolids above
full line of collection container
Problem
Poor lighting in equipment
room
Problem
NXT Prod Guide 05.2018
Questions? Contact Customer Support at 1.800.216.5505 or at www.solmetex.com
Replace thecollection container
• Leave thevacuum runningduring thecollectioincontainerreplacementprocess
System isbacked up -could potentiallydamage vacuum
• Turn on vacuum• Remove pins• Tilt container
toward manifoldto allow air intotop chamber
• Place containerback on andinsert pins
• Change collectioncontainer if full
System isin bypass
• Reduction insuction
• Solids releasedinto waste streamand environment
• Top chamber mustbe replaced
• Full top chambermust be recycled
• New EPAregulationrequires repair orreplacementwithin 10 days ofmalfunction
Clogs intop chamber
• Check what typeof line cleaner isbeing used. ThepH must bebetween 6 & 8
• Turn on vacuum• Remove pins• Tilt container
toward manifoldto allow air intotop chamber
• Place containerback on andinsert pins
Replace thecollection container
• Inspect the topchamber forsolids
• Leave thevacuum runningduring thecollectioincontainerreplacementprocess
Use flashlight to check collection container
• Using aflashlight fromthe backside ofthe system,shine lightforward to helpdeterminethe level ofsedimentation
• Use sameprocedure toinspect topchamber
Solution Solution Solution SolutionSolution Solution