www.soudal.com

Fire range

PRODUCT INFORMATION SOUDAFOAM FR

CONTENTS

Technical Data Sheet

Soudafoam FRRevision: 8/06/2018 Page 1 from 2

Remark: This technical data sheet replaces al previous versions. The directives contained in this documentation are the result of our experiments and of our experience and have been submitted in good faith. Because of the diversity of the materials and substrates and the great number of possible applications which are out of our control, we cannot accept any responsibility for the results obtained. Since the design, the quality of the substrate and processing conditions are beyond our control, no liability under this publication is accepted. In every case it is recommended to carry out preliminary experiments. Soudal reserves the right to modify products without prior notice.

Soudal NV Everdongenlaan 18 - 20 B-2300 Turnhout, BelgiumTel: +32 (0)14-42.42.31 Fax: +32 (0)14-42.65.14 www.soudal.com

Technical dataBasis PolyurethaneConsistancy Stable foam, thixotropicCuring system Moisture curingSkin Formation (FEICA TM 1014) 9,5 minCutting Time (FEICA TM 1005) 90 minDensity** Ca. 25 kg/m³Sound insulation (EN ISO 717-1) 62 dBBox Yield (FEICA TM 1003) 750 ml yields ca. 30 l of foamJoint Yield (FEICA TM 1002) 750 ml yields ca. 21 m of foamShrinkage after curing (FEICA TM 1004) < 6 %Expansion after curing (FEICA TM 1004) < 1 %Expansion during curing (FEICA TM 1010) Ca. 86 %Compressive strength (FEICA TM 1011) Ca. 104 kPaShear strength (FEICA TM 1012) Ca. 43 kPaTemperature resistance** -40 °C till +90 °C (cured)Soudal NV uses test methods approved by FEICA designed to deliver transparent and reproducible test results, ensuring customers have an accurate representation of product performance. FEICA OCF test methods are available at: http://www.feica.com/our-industry/pu-foam-technology-ocf . FEICA is a multinational association representing the European adhesive and sealant industry, including one-component foam manufacturers. Further information at: www.feica.eu

Product descriptionSoudafoam FR is a one-component, self-expanding, ready to use PU-foam, which contains HCFC- and CFC-free propellants who are not harmful for the ozonlayer. Soudafoam FR is a PU-foam with fire retardant characteristics according to the European standard EN 1366-4.

Properties Sealant for preventing the passage of

smoke and gas. Fire resistant in a joint (EN 1366-4) High filling capacity Good adhesion on all surfaces (except PE,

PP and PTFE). High insulation value, thermal and acoustic Very good bonding properties. Not UV-resistant

Applications Fire and smoke retardant sealant between

walls, floors and ceilings. Installation of fireproof doors and windows.

As part of the 'Soudal Fire Range'assortment for penetration seals and joints.

Sealing of all openings in roofconstructions.

Apply of an acoustic baffle All foam applications in static joints.

PackagingColour: pinkPackaging: 750 ml aerosol (net)

Shelf life12 months unopened and stored in dry and cool conditions (Between 5 and 25 °C), Upright storage is recommended.

Technical Data Sheet

Soudafoam FRRevision: 8/06/2018 Page 2 from 2

Remark: This technical data sheet replaces al previous versions. The directives contained in this documentation are the result of our experiments and of our experience and have been submitted in good faith. Because of the diversity of the materials and substrates and the great number of possible applications which are out of our control, we cannot accept any responsibility for the results obtained. Since the design, the quality of the substrate and processing conditions are beyond our control, no liability under this publication is accepted. In every case it is recommended to carry out preliminary experiments. Soudal reserves the right to modify products without prior notice.

Soudal NV Everdongenlaan 18 - 20 B-2300 Turnhout, BelgiumTel: +32 (0)14-42.42.31 Fax: +32 (0)14-42.65.14 www.soudal.com

Application methodShake the aerosol can for at least 20 seconds. Put the adapter on the valve. Moisten surfaces with a water sprayer prior to application. For non-conventional substrates a preliminary adhesion test is recommended. Remove pressure from the applicator to stop. Fill holes and cavities for 1/3, as the foam will expand. Repeat shaking regularly during application. If you have to work in layers repeat moistening after each layer. Fresh foam can be removed using Soudal Gun & Foamcleaner or acetone. Cured foam can only be removed mechanically or with Soudal PU-Remover.

Can temperature: +5 °C - 30 °CAmbient temperature: +5 °C - 30 °C.Surface temperature: +5 °C - 35 °C

Health- and Safety RecommendationsTake the usual labour hygiene into account. Always wear gloves and goggles. Remove cured foam mechanically. Never burn away. Consult label and material safety data sheet for more information. When vaporizing (for example with a compressor), additional security measures will be required.

Standards and certificates European Technical Approval Soudafoam

FR - ETA 13/0280 CE-marked (BCCA - EC conformity CPR) Joint Sound Reduction Test by IFT Various test and classification reports in

various accredited testing institutes: IFT Rosenheim, ITB Poland, Warrington Fire Gent, Warrington Fire Australia, Efectis Netherlands, Efectis France, CSTB France, CSI Italy.

Testresults for penetration seals and/or joints with Soudafoam FR are freely accessible in the ‘Fire Range Application manual Penetration seals and Joints’ on the Soudal Website. The corresponding certificates can be obtained through the Soudal sales representatives or trough the Soudal Website.

Your distributor

Soudal NVEverdongenlaan 18-20B-2300 TurnhoutTel.: +32 (0)14 42 42 31Fax: +32 (0)14 42 65 14email: sales@soudal.comwww.soudal.com

Soudal Ltd.Unit A, Tame ParkVanguardUK- Tamworth B77 5DYUnited KingdomTel.: +44 1827 261 092www.soudal.com

128773-FOL