Product Information Optical - Corning Inc. · 1 1.2 1.4 0 2 4 6 8 10 12 14 16 Normalized...

2
Corning® Gorilla® Glass 3 with Native Damage Resistance™ is an alkali-aluminosilicate thin sheet glass that is better able to survive the real-world events that most commonly cause glass failure. With its new core composition, this glass enables improved damage resistance and toughness by helping to prevent the deep chips and scratches that cause glass to break. Product Information Benefits • Glass designed with improved native damage resistance, - Enhances retained strength after use - High resistance to scratch and sharp contact damage - Superior surface quality Applications • Ideal protective cover for electronic displays in: - Smartphones - Laptop and tablet computer screens - Mobile devices • Touchscreen devices • Optical components • High strength glass articles Dimensions Available thicknesses 0.4 mm - 2.0 mm Viscosity Softening Point (10 7.6 poises) 900 ˚C Annealing Point (10 13.2 poises) 628 ˚C Strain Point (10 14.7 poises) 574 ˚C Properties Density 2.39 g/cm 3 Young’s Modulus 69.3 GPa Poisson’s Ratio 0.22 Shear Modulus 28.5 GPa Vickers Hardness (200 g load) Un-strengthened 534 kgf/mm 2 Strengthened 649 kgf/mm 2 Fracture Toughness 0.66 MPa m 0.5 Coefficient of Expansion 75.8 x 10 -7 /˚C (0 ˚C - 300 ˚C) Chemical Strengthening Compressive stress 950 MPa @ 40 μm DOL Depth of Layer 50 μm Corning® Gorilla® Glass 3 with NDR™ / Product Information Sheet / E_050613 Optical Refractive Index (590 nm) Core glass* 1.50 Compression layer 1.51 Photo-elastic constant 31.9 nm/cm/MPa Chemical Durability Durability is measured via weight loss per surface area after immersion in the solvents shown below. Values are highly dependent upon actual testing conditions. Data reported is for Corning’s Gorilla Glass 3 with NDR™. Reagent HCl - 5% NH4F:HF - 10% HF - 10% NaOH - 5% Time 24 hrs 20 min 20 min 6 hrs Temperature (C°) 95 20 20 95 Weight Loss (mg/cm 2 ) 0.6 2.1 12.3 1.9 Electrical Frequency (MHz) 54 163 272 381 490 599 912 1499 1977 2466 2986 Dielectric Constant 7.59 7.48 7.44 7.42 7.38 7.37 7.30 7.26 7.23 7.20 7.19 Loss Tangent 0.022 0.022 0.021 0.022 0.021 0.022 0.023 0.023 0.023 0.024 0.025 0 10 20 30 40 50 60 70 80 90 100 250 500 750 1000 1250 1500 1750 2000 2250 2500 % Transmission Wavelength (nm) Wavelength [nm] Transmiance [%] 380 > 91.5 560 > 92.2 840 > 92.3 1200 > 92.4 1750 > 92.6 2000 > 92.6 Terminated coaxial line similar to that outlined in NIST Technical Notes 1520 and 1355-R. * Core index is used for FSM-based measurements since it is unaffected by ion-exchange conditions.

Transcript of Product Information Optical - Corning Inc. · 1 1.2 1.4 0 2 4 6 8 10 12 14 16 Normalized...

Page 1: Product Information Optical - Corning Inc. · 1 1.2 1.4 0 2 4 6 8 10 12 14 16 Normalized Ring-on-Ring Failure Load Scratch Load (N) mean w/95% CI Gorilla® Glass 2 Gorilla ® Glass

Corning® Gorilla® Glass 3 with Native Damage Resistance™ is an alkali-aluminosilicate thin sheet glass that is better able to survive the real-world events that most commonly cause glass failure. With its new core composition, this glass enables improved damage resistance and toughness by helping to prevent the deep chips and scratches that cause glass to break.

Product InformationBenefits• Glass designed with improved native damage resistance, - Enhances retained strength after use - High resistance to scratch and sharp contact damage - Superior surface quality

Applications • Ideal protective cover for electronic displays in: - Smartphones - Laptop and tablet computer screens - Mobile devices• Touchscreen devices• Optical components• High strength glass articles

DimensionsAvailable thicknesses 0.4 mm - 2.0 mm

ViscositySoftening Point (107.6 poises) 900 ˚CAnnealing Point (1013.2 poises) 628 ˚CStrain Point (1014.7 poises) 574 ˚C

PropertiesDensity 2.39 g/cm3

Young’s Modulus 69.3 GPaPoisson’s Ratio 0.22Shear Modulus 28.5 GPaVickers Hardness (200 g load) Un-strengthened 534 kgf/mm2

Strengthened 649 kgf/mm2

Fracture Toughness 0.66 MPa m0.5

Coefficient of Expansion 75.8 x 10-7/˚C(0 ˚C - 300 ˚C)

Chemical StrengtheningCompressive stress ≥ 950 MPa @ 40 µm DOLDepth of Layer ≥ 50 µm

Corning® Gorilla® Glass 3 with NDR™ / Product Information Sheet / E_050613

OpticalRefractive Index (590 nm) Core glass* 1.50 Compression layer 1.51Photo-elastic constant 31.9 nm/cm/MPa

Chemical DurabilityDurability is measured via weight loss per surface area after immersion in the solvents shown below. Values are highly dependent upon actual testing conditions. Data reported is for Corning’s Gorilla Glass 3 with NDR™.

Reagent

HCl - 5%NH4F:HF - 10%HF - 10%NaOH - 5%

Time

24 hrs20 min20 min

6 hrs

Temperature(C°)

95202095

Weight Loss(mg/cm2)

0.62.1

12.31.9

Electrical Frequency (MHz)

54163272381490599912

1499197724662986

Dielectric Constant

7.597.487.447.427.387.377.307.267.237.207.19

Loss Tangent

0.0220.0220.0210.0220.0210.0220.0230.0230.0230.0240.025

0

10

20

30

40

50

60

70

80

90

100

250 500 750 1000 1250 1500 1750 2000 2250 2500

% Tr

ansm

issi

on

Wavelength (nm)

Wavelength [nm] Transmittance [%] 380 > 91.5 560 > 92.2 840 > 92.3 1200 > 92.4 1750 > 92.6 2000 > 92.6

Terminated coaxial line similar to that outlined in NIST Technical Notes 1520 and 1355-R.

* Core index is used for FSM-based measurements since it is unaffected by ion-exchange conditions.

Page 2: Product Information Optical - Corning Inc. · 1 1.2 1.4 0 2 4 6 8 10 12 14 16 Normalized Ring-on-Ring Failure Load Scratch Load (N) mean w/95% CI Gorilla® Glass 2 Gorilla ® Glass

0

2000

4000

6000

8000

10000

12000

14000

16000

Soda Lime(with IOX)

Gorilla® Glass 2(with IOX)

Gorilla® Glass 3 with NDR™(with IOX)

Criti

cal L

oad

(g)

0

20

40

60

80

100

120

140

0.3 0.5 0.7 0.9 1.1 1.3

Thickness, mm

Load

to fa

ilure

, Kgf

(rin

g-on

-rin

g)

Gorilla® Glass 3 with NDR™ Soda Lime Glass

0

0.2

0.4

0.6

0.8

1

1.2

1.4

0 2 4 6 8 10 12 14 16

Nor

mal

ized

Rin

g-on

-Rin

g Fa

ilure

Load

Scratch Load (N)

mean w/95% CI

Gorilla® Glass 2 Gorilla® Glass with NDR™

Strength, MPa

Failu

re P

roba

bilit

y, %

1.0

5.0

10.0

50.0

90.0

99.0

Gorilla® Glass 3 with NDR™

Soda Lime Glass

Putting Gorilla® Glass 3 with NDR™ to the Test.

It takes more load to initiate radial cracks in the glass.

Devices benefit from greater retained strength.

Corning Gorilla Glass 3 with NDR™ exhibits tighter strength distribution.

Greater damage resistance

Enables the use of thinner cover glass

Enables greater strength

Greater retained strength

Scratches are less visible

For more information:Email: gorillaglass.comWeb: www.corninggorillaglass.com

Corning is a registered trademark of Corning Incorporated. Corning, N.Y. USA© Corning Incorporated 2015_All Rights reserved Rev: F_090315

Gorilla® Glass 3 with NDR™ (7 N)

Gorilla® Glass 2 (4 N)

Competitor Glass (4 N)

Knoop Visual Scratch TestAfter Ion Exchange