Product Information: Mikrobac® forte · Mikrobac ® forte Aldehyde-free surface disinfectant...
Transcript of Product Information: Mikrobac® forte · Mikrobac ® forte Aldehyde-free surface disinfectant...
Mikrobac® forteAldehyde-free surface disinfectant cleaner withmaterial-friendly protection factor.
Advantages at a glance• broad spectrum of effect• aldehyde-free• good cleaning power• low odour formulation• also suitable for industrial kitchens
and food-processing areas
ApplicationMikrobac forte is suitable for the dailydisinfecting maintenance cleaning of allwater-resistant surfaces in areas whereodourless disinfection is preferred.
Areas of applicationMikrobac forte is suitable for the disinfectantcleaning of washable surfaces using thewet-wipe-procedure, e.g.:• for medical equipment which come under
the Medical Device Directive (acc. MDD)• in hospitals and residential homes (acc. BPR)• in industrial kitchens and food-processing
areas (acc. BPR)
Directions for useMikrobac forte is supplied as a concentrate.
Wet completely the parts of medical devices andother washable surfaces (e.g. floors) tobe disinfected with a sufficient amount ofsolution.We recommend wearing suitable gloves whileusing this product.To remove disinfectant residue from sensitiveplastic surfaces of medical devices, wipesurfaces with a cloth soaked in water (at leastdrinking water quality) after the exposure time.
Do not allow disinfection solution to getinside of electrical devices. Please observethe manufacturer´s instructions. Rinse cleaningequipment well with water. Always preparethe solution with cold water (max. roomtemperature).
Contacts between aminic and aldehydicproducts must be avoided. Therefore – especiallyif work has previously been carried out with analdehyde-containing product – before usingMikrobac forte for the first time, carry out an in-termediate cleaning. Not suitable for the disin-fection of invasive medical devices.
Use disinfectants safely. Always read the labeland product information before use.
MicrobiologyBactericidal, yeasticidal, tuberculocidal, virucidalagainst enveloped viruses (incl. HBV, HIV, HCV),MNV, adeno-, polyoma- and rotavirus
CompositionActive ingredients: Benzyl-C12-18-alkyldimethylammonium chloride 199 mg/g,N-(3-Aminopropyl)-N-dodecylpropane-1,3-diamine 50 mg/g
Material compatibilityMikrobac forte use-solutions were tested fortheir compatibility on the following materials,among others:
• Metals: Stainless steel (V2A), aluminium,copper, brass
• Plastics: Polyamide (PA), polyethylene (PE),polypropylene (PP), polystyrene (PS),polyurethane (PUR), PVC, acryl-butadiene-styrole, silicone, rubber, latex, Makrolon®,acrylic glass, Teflon®, Vivak® clear 099
When used correctly (wet-wipe-procedure) nomaterial damage is to be expected.
Related Products:• Mikrobac food: Aldehyde-free cleaning
disinfectant for food processing areas.
• Dismozon plus: Oxygen-active surfacedisinfectant cleaner. Granules speciallydeveloped for sensitive surfaces and the finaldisinfection.
• Bacillol AF: Alcohol-based rapid disinfectantfor disinfecting alcohol-resistant surfaces,with extensive spectrum of activity. Drieswithout leaving residues.
Mikrobac® forte
2
3
clean 20.0 ml/L - 2.0% - 5 mindirty 25.0 ml/L - 2.5% - 5 minclean + dirty 10.0 ml/L - 1.0% - 30 minclean + dirty 5.0 ml/L - 0.5% - 1 h
clean 5.0 ml/L - 0.5% - 5 min
Bactericidal / Yeasticidal
clean 2.5 ml/L - 0.25% - 5 minBactericidal (EN 13727)
clean + dirty 20.0 ml/L - 2.0% - 2hTuberculocidal activity(M. terrae) - DGHM
Mikrobac® forte
Bacteria and Fungi
Viruses
clean 2.5 ml/L - 0.25% - 5 minclean + dirty 2.5 ml/L - 0.25% - 30 minclean + dirty 5.0 ml/L - 0.5% - 5 min
Yeasticidal (EN 13624)
clean + dirty 40.0 ml/L - 4.0% - 4hAdenovirus (EN 14476)
clean 20.0 ml/L - 2.0% - 4hdirty 40.0 ml/L - 4.0% - 4h
Norovirus, murine (EN 14476)
2.5 ml/L - 0.25% - 5 minRotavirus (DVV / RKI)5.0 ml/L - 0.5% - 2h10.0 ml/L - 1.0% - 30 min
Polyomavirus (DVV / RKI)
Food
low (20°C) 20.0 ml/L - 2.0% - 5 minlow (20°C) 2.5 ml/L - 0.25% - 30 minhigh (20°C) 30.0 ml/L - 3.0% - 30 minlow (10°C) 25.0 ml/L - 2.5% - 5 minlow (10°C) 5.0 ml/L - 0.5% - 30 minhigh (10°C) 7.5 ml/L - 0.75% - 30 min
Bactericidal / Yeasticidal(EN 13697 + EN 1276+ EN1650)
Certified applicationrecommendation (based onsuspension and practicaltests of VAH - GermanAssociation for Applied Hygiene)
Virucidal against envelopedviruses (incl. HBV, HIV, HCV)(DVV / RKI)
Proven efficacy Condition Exposure time
Efficacy according to ENPhase 2 / Step 1(suspension test)
Efficacy against bacteriafollowing DGHM (within thecertified bactericidal efficacy)
Efficacy against non-enveloped viruses (DVV -German Society for theControl of Viral Diseases)
Efficacy against envelopedviruses
Efficacy according to ENPhase 2 / Step 2 andPhase 2 / Step 1)
Packungs- Artikel- PZN Vers.-Einh.Product Presentation
Product Content Item no.
Mikrobac® forte
20 ml on request
5 l on request
Please note: that the availability of products in the Mikrobac range may vary in different countriesand regions. Contact your local distribution partner for more information.The recommendations regarding our preparations are based on scientific tests and are given ingood faith. More detailed recommendations, e.g. regarding material compatibility, are possibleonly in separate, individual cases. Our recommendations are not binding and do not constitute aguarantee. They do not preclude a company’s own testing for the intended purpose and process.In this respect we cannot accept any liability. This is in accordance with our general conditions ofsale and supply.
Manufacturer
BODE Chemie GmbHA company of the HARTMANN GROUPMelanchthonstraße 2722525 HamburgGermany
09/17