Product Guide - First Class Wet Rooms€¦ · Traps Page 80 Fill and flush valves for ceramic...
Transcript of Product Guide - First Class Wet Rooms€¦ · Traps Page 80 Fill and flush valves for ceramic...
Product and Installation Guide Washroom & Bathroom 2012 1
Product Guide
Duofix WC frames Page 3
Concealed cisterns Page 10
WC flush plates Page 13
Remote flushing kits Page 21
Monolith Sanitary Modules Page 28
Duofix basin frames Page 39
Taps Page 40
Duofix bidet frames Page 55
Duofix urinal frames Page 57
Accessories Page 70
Drainage Page 75
Traps Page 80
Fill and flush valves for ceramic cisterns Page 89
Geberit AquaClean Page 91
Spares Page 106
Installation Guide
Main methods of Duofix installation Page 115
Waste and drainage connection Page 121
Numerical Index Page 124
2 Product and Installation Guide Washroom & Bathroom 2012
Product Guide
Compatibility - Flush plates and buttons
Flush plates
Sigma concealed
cistern 12 cm
Sigma concealed
cistern 8 cm
Kappa concealed
cistern 15 cm
Exposed cistern
type 123
Sigma10 Rumba Tango Mambo
✓ ✓
Sigma01 Sigma20 Sigma50 Sigma60 Bolero
✓ ✓
Mambo touchless Sigma 80 115.890.00.1115.891.00.1 116.090.xx.1
115.855.00.1116.091.xx.1
Large Access Cover Plate
✓ ✓
Kappa20 Kappa21 Kappa50
✓
Small Access Cover Plate
✓
Geberit single flush buttonsShort wall palm 115.114.xx.1241.199.xx.1
Long wall finger241.144.00.1
Short wall finger115.947.xx.1.xx.1
Long wall finger115.943.21.1
Short wall palm 115.949.21.1241.282.21.1
Palm push 115.941.xx.1
115.114.xx.1115.947.xx.1115.949.21.1115.943.21.1115.941.xx.1
115.114.xx.1115.947.xx.1115.949.21.1115.943.21.1115.941.xx.1
241.199.xx.1241.198.xx.1241.282.21.1241.144.00.1115.941.xx.1
Geberit dual flush buttonsHand push115.942.xx.1
Finger push115.999.21.1
Finger push115.075.21.x
115.942.xx.1 115.075.21.x 115.942.xx.1
Geberit touchless buttonsSensor flush 115.857.xx.1
Insert for in-cistern blocks115.612.00.1
Insert for adding in-cistern blocks compatible with Geberit’s Sigma01, 10, 20 and 50 range of flush plates
Product GuideDuofix WC frames
Product and Installation Guide Washroom & Bathroom 2012 3
Duofix WC frames
Geberit Duofix frame for wall-hung WC, H112, with Sigma cistern 12 cm (UP320)
Application
• For installation of a wall-hung WC with bolt fixings set at 180 or 230 mm centres
• For installation in a room-height Duofix system wall in front of a solid or drywall construction
• For mounting in front of a solid or drywall construction• For a screed of 0 - 200 mm (not in room height applications)• For connecting Geberit AquaClean
Characteristics
• Self-supporting• Frame with C profile 40/40 mm• Powder-coated frame, ultramarine blue• Galvanised leg supports, steplessly adjustable 0 - 200 mm• Feet can be retracted 5 cm• Rotating foot plate, for installation in UW50 and UW75 profiles• Frame with holes ø 9 mm for fastening in wood frame construction• Sound-absorbing actuator rods, tool-free, fast adjustment• Concealed cistern fully insulated against condensation• Concealed cistern for tool-free mounting and maintenance• Frame height 1120 mm• With wall brackets to allow up to a 200 mm duct. For larger ducts up
to 400 mm use extension bolts 111.887.00.1• Tool-free fastening for outlet bend, sound-absorbing, adjustable in
depth with 8 positions, adjustable range 45 mm• Connection hose to angle stop valve can be screwed without tools• Water supply connection at centre back or at the top• Geberit Sigma concealed cistern 12 cm (UP320) with front actuation• Dual flush with Sigma80, Sigma60, Sigma50, Sigma20, Sigma01 or
Bolero flush plates • Single flush with Sigma10, Rumba, Mambo or Tango flush plates • Dual flush with pneumatic button• Single flush with touchless flush or pneumatic buttons• The protection cover protects the service opening against moisture
and dirt and can be mounted without tools and cut to length• Universal water supply connection compatible with MeplaFix, can be
mounted and operated without tools• Self-locking feet for tool-free alignment of the frame, (friction feet have
to be locked with spanner)• For pans with contact surfaces smaller than 170 mm (see accessory
111.847.00.1)• Flush valve features settings to enable either a 6l and 3l flush or a 4.5l
and 3l flush. For flush volumes of 4l and 2l a low flush beaker is required (241.894.00.1)
Product Details
Additional Note2 Duofix PreWall brackets for system; Water supply connection R 1/2" male BSP parallel thread with integrated angle stop valve and hand wheel; Conduit pipe for the water supply connection of Geberit AquaClean; Flush bend; Protection plug; Protection housing for service opening; 2 threaded rods M12 for ceramics fastening; WC connection set, ø 90 mm; WC outlet bend, HDPE, ø 90 mm; Adaptor sleeve, HDPE, ø 90/110 mm; Fastening material; To be installed with a check valve or similar providing backflow prevention protection
Excluded: Flush plate
Ordering Information
Duofix WC frames
0
0-20
100
50R½
73
1045
23
112
18/2318/23
195 ≥ 30
0
100
48
9-135
12 6
41max. 62
Flow pressure range 0.1–10 bar
Operating temperature water max. 25 °C
Flush volume small range 3–4 l
Flush volume factory setting 5.8 and 3 l
Article no. PU1 PU4
111.383.00.5 1 12
4 Product and Installation Guide Washroom & Bathroom 2012
Product GuideDuofix WC frames
Geberit Duofix frame for wall-hung WC, H112, with Sigma cistern 12 cm (UP320), without fixings and drainage
Application
• For installation of a wall-hung WC with bolt fixings set at 180 or 230 mm centres
• For installation in a room-high Duofix system wall• For installation in a load bearing stud wall• For a screed of 0 - 200 mm (not in room height applications)• For connecting Geberit AquaClean
Characteristics
• Self-supporting• Frame with C profile 40/40 mm• Powder-coated frame, ultramarine blue• Galvanised leg supports, steplessly adjustable 0 - 200 mm• Feet can be retracted 5 cm• Rotating foot plate, for installation in UW50 and UW75 profiles• Frame with holes ø 9 mm for fastening in wood frame construction• Sound-absorbing actuator rods, tool-free, fast adjustment• Concealed cistern fully insulated against condensation• Concealed cistern for tool-free mounting and maintenance• Frame height 1120 mm• Tool-free fastening for outlet bend, sound-absorbing, adjustable in
depth with 8 positions, adjustable range 45 mm• Connection hose to angle stop valve can be screwed without tools• Water supply connection at centre back or at the top• Geberit Sigma concealed cistern 12 cm (UP320) with front actuation• Dual flush with Sigma80, Sigma60, Sigma50, Sigma20, Sigma01 or
Bolero flush plates • Single flush with Sigma10, Rumba, Mambo or Tango flush plates • Dual flush with pneumatic button• Single flush with touchless flush or pneumatic buttons• The protection cover protects the service opening against moisture
and dirt and can be mounted without tools and cut to length• Cistern can be reversed to give access from behind in a duct situation
when flushed with pneumatic buttons or touchless flush• Universal water supply connection compatible with MeplaFix, can be
mounted and operated without tools• Self-locking feet for tool-free alignment of the frame, (friction feet have
to be locked with spanner)• For pans with contact surfaces smaller than 170 mm (see accessory
111.847.00.1)• Flush valve features settings to enable either a 6l and 3l flush or a 4.5l
and 3l flush. For flush volumes of 4l and 2l a low flush beaker is required (241.894.00.1)
Product Details
Additional NoteWater supply connection R 1/2" male BSP parallel thread with integrated angle stop valve and hand wheel; Conduit pipe for the water supply connection of Geberit AquaClean; Flush bend; Protection plug; Protection housing for service opening; 2 threaded rods M12 for ceramics fastening; Fastening material; To be installed with a check valve or similar providing backflow prevention protection
Excluded: Flush plate; PreWall brackets; WC outlet bend, HDPE, ø 90 mm; Adaptor sleeve, HDPE, ø 90/110 mm
Ordering Information
0
0-20
100
50R½
73
1045
23
112
195 ≥ 30
18/23
0
100
48
9-135
12 6
41max. 62
Flow pressure range 0.1–10 bar
Operating temperature water max. 25 °C
Flush volume small range 3–4 l
Flush volume factory setting 5.8 and 3 l
Article no. PU1 PU4
111.384.00.5 1 12
Product GuideDuofix WC frames
Product and Installation Guide Washroom & Bathroom 2012 5
Geberit Duofix frame for wall-hung WC, H112, with Sigma cistern 12 cm (UP320), connection for odour extraction with filtration New
Application
• For a screed of 0 - 200 mm (not in room height applications)• For installation in a partial-height Duofix system wall in front of a solid
or drywall construction• For installation in a room-high Duofix system wall• For mounting in front of a solid or drywall construction• For installation of a wall-hung WC with bolt fixings set at 180 or
230 mm centres• For connecting Geberit AquaClean• For connecting the Geberit flush plate Sigma40 with the odour
extraction unit
Characteristics
• Geberit Sigma concealed cistern 12 cm (UP320) with front actuation• Dual flush with Geberit actuator plate Sigma40• For optional use without odour extraction unit: dual flush with Geberit
actuator plates Sigma01, Sigma20, Sigma50 or Bolero• For optional use without odour extraction unit: single flush with
Geberit flush plates Sigma10, Rumba, Mambo or Tango• Adjustable flushing volume• Concealed cistern for tool-free mounting and maintenance• The protection cover protects the service opening against moisture
and dirt and can be mounted without tools and cut to length• Sound-absorbing actuator rods, tool-free, fast adjustment• Connection hose to angle stop valve can be screwed without tools• Tool-free fastening for outlet bend, sound-absorbing, adjustable in
depth with 8 positions, adjustable range 45 mm• Self-locking feet for tool-free alignment of the frame, (friction feet have
to be locked with spanner)• Galvanised leg supports, steplessly adjustable 0 - 200 mm• For pans with contact surfaces smaller than 170 mm (see accessory
111.847.00.1)• Frame with holes ø 9 mm for fastening in wood frame construction• Concealed cistern fully insulated against condensation• Self-supporting• Frame with C profile 40/40 mm• Powder-coated frame, ultramarine blue• Feet can be retracted 5 cm• Rotating foot plate, for installation in UW50 and UW75 profiles• Water supply connection at the top, offset to the left side• Outlet mounting box, can be universally positioned
Product Details
Additional Note2 Duofix PreWall brackets for system; Acoustic insulation set; Water supply connection R 1/2" male BSP parallel thread with integrated angle stop valve and hand wheel; Conduit pipe for the water supply connection of Geberit AquaClean; Flush pipe with odour extraction adapter; Protection plug; Protection housing for service opening; 2 threaded rods M12 for ceramics fastening; WC connection set, ø 90 mm; WC outlet bend, HDPE, ø 90 mm; Adaptor sleeve, HDPE, ø 90/110 mm; Fastening material; Outlet mounting box; To be installed with a check valve or similar providing backflow prevention protection
Excluded: Flush plate
Ordering Information
R½
0
0-20
100
50
73
23
112
195
325
≥ 31
18/23
0
100
48
9−135
12 6
41+2
−1≤ 62
Flow pressure range 0.1–10 bar
Operating temperature water max. 25 °C
Flush volume factory setting 5.8 and 3 l
Flush volume small range 3–4 l
Article no. PU1 PU4
111.353.00.5 1 12
6 Product and Installation Guide Washroom & Bathroom 2012
Product GuideDuofix WC frames
Geberit Duofix frame for wall-hung WC, H98, with Kappa cistern 15 cm (UP200)
Application
• For installation of a wall-hung WC with bolt fixings set at 180 or 230 mm centres
• For installation in a partial-height Duofix system wall in front of a solid or drywall construction
• For mounting in front of a solid or drywall construction• For a screed of 0 - 200 mm
Characteristics
• Self-supporting• Frame with C profile 40/40 mm• Powder-coated frame, ultramarine blue• Galvanised leg supports, steplessly adjustable 0 - 200 mm• Feet can be retracted 5 cm• Rotating foot plate, for installation in UW50 and UW75 profiles• Frame with holes ø 9 mm for fastening in wood frame construction• Fast adjustment of the actuator rods for flush plate• Concealed cistern fully insulated against condensation• Protection housing for service opening, can be cut to length• Frame height 980 mm• With wall brackets to allow up to a 200 mm duct. For larger ducts up
to 400 mm use extension bolts 111.887.00.1• Geberit Kappa concealed cistern 15 cm (UP200) with front or top
actuation• Dual flush with Kappa flush plates• Dual flush with pneumatic button• Single flush with pneumatic and mechanical buttons• Water supply connection left• Fastening for outlet bend sound-absorbing• Connection hose to angle stop valve can be screw-connected by
hand• For pans with contact surfaces smaller than 170 mm (see accessory
111.847.00.1)• To reduce flush volume to either 4.5/3 litre dual flush or 4/2.6 litre dual
flush requires material number 242.310.00.1 (note: must be used with pans designed for low volume flush)
Product Details
Additional Note2 Duofix PreWall brackets for system; Water supply connection R 1/2" male BSP parallel thread with integrated angle stop valve; Protection housing for service opening; 2 threaded rods M12 for ceramics fastening; WC connection set, ø 90 mm; WC outlet bend, HDPE, ø 90 mm; Adaptor sleeve, ø 90/110 mm; Protection plug; Fastening material; To be installed with a check valve or similar providing backflow prevention protection
Excluded: Flush plate
Ordering Information
Geberit Duofix WC frame for wall-hung WC, H82, with Kappa cistern 15 cm (UP200)
Application
• For installation of a wall-hung WC with bolt fixings set at 180 or 230 mm centres
• For installation in a partial-height Duofix system wall in front of a solid or drywall construction
• For mounting in front of a solid or drywall construction• For a screed of 0 - 200 mm
Characteristics
• Self-supporting• Frame with C profile 40/40 mm• Powder-coated frame, ultramarine blue• Galvanised leg supports, steplessly adjustable 0 - 200 mm• Feet can be retracted 5 cm• Rotating foot plate, for installation in UW50 and UW75 profiles• Frame with holes ø 9 mm for fastening in wood frame construction• Fast adjustment of the actuator rods for flush plate• Concealed cistern fully insulated against condensation• Protection housing for service opening, can be cut to length• Frame height 820 mm• With wall brackets to allow up to a 200 mm duct. For larger ducts up
to 400 mm use extension bolts 111.887.00.1• Geberit Kappa concealed cistern 15 cm (UP200) with front or top
actuation• Dual flush with Kappa flush plates• Dual flush with pneumatic button• Single flush with pneumatic and mechanical buttons• Water supply connection left• Fastening for outlet bend sound-absorbing• Connection hose to angle stop valve can be screw-connected by
hand• For pans with contact surfaces smaller than 170 mm (see accessory
111.847.00.1)• To reduce flush volume to either 4.5/3 litre dual flush or 4/2.6 litre dual
flush requires material number 242.310.00.1 (note: must be used with pans designed for low volume flush)
Product Details
Additional Note2 Duofix PreWall brackets for system; Water supply connection R 1/2" male BSP parallel thread with integrated angle stop valve; Protection housing for service opening; 2 threaded rods M12 for ceramics fastening; WC connection set, ø 90 mm; WC outlet bend, HDPE, ø 90 mm; Adaptor sleeve, ø 90/110 mm; Protection plug; Fastening material; To be installed with a check valve or similar providing backflow prevention protection
Excluded: Flush plate
Ordering Information
Flow pressure range 0.1–10 bar
Operating temperature water max. 25 °C
Flush volume factory setting 5.8 and 3 l
Article no. PU1
111.292.00.1 1
33
98
50
18/23
23
0-20
0
R1/2
915
195
73
≥ 30
91
max. 107
0
48
41
66
min. 17
max. 62
9-135
Flow pressure range 0.1–10 bar
Operating temperature water max. 25 °C
Flush volume factory setting 5.8 and 3 l
Article no. PU1
111.242.00.1 1
82
50
18/23
22
0-20
0
R1/2
32
755
73
195 ≥ 30
75
0
48
40
max. 9166
min. 17
max. 62
9-135
Product GuideDuofix WC frames
Product and Installation Guide Washroom & Bathroom 2012 7
Geberit Duofix frame for wall-hung WC, H112, with Sigma cistern 8 cm (UP720)
Application
• For installation of a wall-hung WC with bolt fixings set at 180 or 230 mm centres
• For installation in a room-height Duofix system wall in front of a solid or drywall construction
• For installing in a load bearing stud wall• For installation in split-height PreWall construction in front of a solid or
drywall construction• For installation in room-height PreWall or partition wall• For connecting Geberit AquaClean• Can not be embedded in concrete at full room height
Characteristics
• Self-supporting• Frame height 1120 mm• M12 fastening for ceramic appliances, fastening distance 18 cm or
23 cm • Front actuation only• Concealed cistern fully insulated against condensation• Protection cover for service opening can be mounted without tools
and cut to length• Water supply connection at the top, offset to the left side• Universal water supply connection compatible with MeplaFix, can be
mounted and operated without tools• Connection hose to angle stop valve can be screwed without tools• Sound-absorbing actuator rods, tool-free, fast adjustment• Single flush with Sigma10, Rumba, Mambo or Tango flush plates • Dual flush with Sigma80, Sigma60, Sigma50, Sigma20, Sigma01 or
Bolero flush plates • Adjustable flushing volume• Not suitable for use with flush buttons• The protection cover protects the service opening against moisture
and dirt and can be mounted without tools and cut to length• Outlet bend depth with vertical connection 9 cm• Fastening for outlet bend adjustable in depth and sound-absorbing• Installation depth at least 8 cm with vertical drainage connection• Frame with C profile 40/40 mm• Powder-coated frame, ultramarine blue• Feet galvanised, adjustable 0-12 cm• Self-locking feet for tool-free alignment of the frame, (friction feet have
to be locked with spanner)• For pans with contact surfaces smaller than 170 mm (see accessory
111.847.00.1)
Product Details
Additional NoteWater supply connection R 1/2" male BSP parallel thread with integrated angle stop valve and hand wheel; Two protection plugs; Protection housing for service opening; Flush bend; 2 threaded rods M12 for ceramics fastening; WC connection set, ø 90 mm; WC outlet bend, PE-HD, ø 90 mm, extended; Adaptor sleeve, HDPE, ø 90/110 mm; Conduit pipe for the water supply connection of Geberit AquaClean; 2 PreWall brackets; Fastening material; To be installed with a check valve or similar providing backflow prevention protection
Excluded: Flush plate
Ordering Information
Geberit Duofix frame for wall-hung WC, H79, with concealed cistern for low height furniture, pneumatic, dual flush
Application
• For installation of a wall-hung WC with bolt fixings set at 180 or 230 mm centres
• For installation in bathroom furniture with full length front panel (not for use with front plinths)
• For furniture with an internal dimension of 465 mm wide, the item can not be used with side plinths
• For dual flush• Includes extension brackets taking the depth up to 335 mm
Characteristics
• Pneumatic flush actuation• Front or top actuation• Front or top access• Water supply connection at the bottom left• Self-supporting• Powder-coated frame, ultramarine blue• Galvanised leg supports, steplessly adjustable 0 - 200 mm
Product Details
Additional NoteTo be installed with a check valve or similar providing backflow prevention protection
Ordering Information
0-12
≥ 34
16
0
23
100
R½59
18/23 112
98
45
98
1-58
0-12
0
41≤ 62
0-12
0
9
48
135
Flow pressure range 0.1–10 bar
Operating temperature water max. 25 °C
Flush volume factory setting 5.8 and 3 l
Article no. PU1 PU4
111.729.00.1 1 12
Flow pressure range 0.1–10 bar
Operating temperature water max. 25 °C
Flush volume factory setting 5.5 and 3 l
Article no. PU1
111.706.00.1 1
10
465
0
0-20
79
18/23
195
195−335
0
8 Product and Installation Guide Washroom & Bathroom 2012
Product GuideDuofix WC frames
Geberit Duofix Special frame for wall-hung WC, H112, with Sigma cistern 12 cm (UP320), corner installation
Application
• For installation of a wall-hung WC with bolt fixings set at 180 or 230 mm centres
• For installation as a corner element in front of a drywall, solid wall, Duofix system wall
• For a screed of 0 - 200 mm (not in room height applications)• For connecting Geberit AquaClean
Characteristics
• Self-supporting• Frame with C profile 40/40 mm• Powder-coated frame, ultramarine blue• Feet can be retracted 5 cm• Rotating foot plate, for installation in UW50 and UW75 profiles• Frame with axis centre mark• Sound-absorbing actuator rods, tool-free, fast adjustment• Concealed cistern fully insulated against condensation• Concealed cistern for tool-free mounting and maintenance• Frame height 1120 mm• Connection hose to angle stop valve can be screwed without tools• Water supply connection at centre back or at the top• Geberit Sigma concealed cistern 12 cm (UP320) with front actuation• Dual flush with Sigma80, Sigma60, Sigma50, Sigma20, Sigma01 or
Bolero flush plates • Single flush with Sigma10, Rumba, Mambo or Tango flush plates • Not suitable for use with flush buttons• The protection cover protects the service opening against moisture
and dirt and can be mounted without tools and cut to length• Universal water supply connection compatible with MeplaFix, can be
mounted and operated without tools• Telescopic profiles to fasten to the wall and for fastening panelling• Telescopic profiles with detent mark• Wall fixture variable from 30° to 60°• Narrow leg supports allow for lateral offset of the drainage pipe• Support for front, top and lateral panelling• Variable element depth (see page 120)• For pans with contact surfaces smaller than 170 mm (see accessory
111.847.00.1)• Flush valve features settings to enable either a 6l and 3l flush or a 4.5l
and 3l flush. For flush volumes of 4l and 2l a low flush beaker is required (241.894.00.1)
Product Details
Additional NoteWater supply connection R 1/2" male BSP parallel thread with integrated angle stop valve and hand wheel; Flush bend; Conduit pipe for the water supply connection of Geberit AquaClean; Protection plug; Installation kit for electrical connection; Protection housing for service opening; 2 threaded rods M12 for ceramics fastening; WC outlet pipe, HDPE, ø 90 mm; Adaptor sleeve, HDPE, ø 90/110 mm; WC connection set, ø 90 mm; Fastening material; To be installed with a check valve or similar providing backflow prevention protection
Excluded: Flush plate
Ordering Information
Flow pressure range 0.1–10 bar
Operating temperature water max. 25 °C
Flush volume small range 3–4 l
Flush volume factory setting 6 and 3 l
1045
1120
0
0-200
500-760R½
180/230
1000
230
90
0
1000
128
48
110
60
410max. 6202010
Article no. PU1 PU4
111.399.00.5 1 10
Product GuideDuofix WC frames
Product and Installation Guide Washroom & Bathroom 2012 9
Geberit Duofix Special frame for wall-hung WC, H112, with Sigma cistern 12 cm (UP320), disabled installation
Application
• For installation of a wall-hung WC with bolt fixings set at 180 or 230 mm centres
• For wall-hung WC with projection > 620 mm• For installation in a partial-height Duofix system wall in front of a solid
or drywall construction• For installation in a room-high Duofix system wall• For installation in a load bearing stud wall• For mounting in front of a solid or drywall construction (order PreWall
brackets 111.844.00.1 separately)• For installation in split-height PreWall construction in front of a solid or
drywall construction• For a screed of 0 - 200 mm (not in room height applications)• For disabled WC installations• For connecting Geberit AquaClean
Characteristics
• Self-supporting• Frame with C profile 40/40 mm• Powder-coated frame, ultramarine blue• Galvanised leg supports, steplessly adjustable 0 - 200 mm• Feet can be retracted 5 cm• Rotating foot plate, for installation in UW50 and UW75 profiles• Frame with holes ø 9 mm for fastening in wood frame construction• Sound-absorbing actuator rods, tool-free, fast adjustment• Concealed cistern fully insulated against condensation• Concealed cistern for tool-free mounting and maintenance• Frame height 1120 mm• Tool-free fastening for outlet bend, sound-absorbing, adjustable in
depth with 8 positions, adjustable range 45 mm• Connection hose to angle stop valve can be screwed without tools• Water supply connection at centre back or at the top• Geberit Sigma concealed cistern 12 cm (UP320) with front actuation• Dual flush with Sigma80, Sigma60, Sigma50, Sigma20, Sigma01 or
Bolero flush plates • Single flush with Sigma10, Rumba, Mambo or Tango flush plates • The protection cover protects the service opening against moisture
and dirt• Not suitable for use with flush buttons• The protection cover protects the service opening against moisture
and dirt and can be mounted without tools and cut to length• Universal water supply connection compatible with MeplaFix, can be
mounted and operated without tools• Self-locking feet for tool-free alignment of the frame, (friction feet have
to be locked with spanner)• For pans with contact surfaces smaller than 170 mm (see accessory
111.847.00.1)• Adjustable installation height of the WC, 410 - 460 mm• Flush valve features settings to enable either a 6l and 3l flush or a 4.5l
and 3l flush. For flush volumes of 4l and 2l a low flush beaker is required (241.894.00.1)
Product Details
Additional NoteWater supply connection R 1/2" male BSP parallel thread with integrated angle stop valve and hand wheel; Conduit pipe for the water supply connection of Geberit AquaClean; Flush bend; Protection plug; Protection housing for service opening; WC connection set, ø 90 mm; WC outlet bend, HDPE, ø 90 mm; Adaptor sleeve, HDPE, ø 90/110 mm; 2 threaded rods M12 for ceramics fastening; Fastening material; To be installed with a check valve or similar providing backflow prevention protection
Excluded: Flush plate
Ordering Information
Geberit Duofix frame for support handles, H112
Application
• For installation of grab rails• For a screed of 0 - 200 mm• For installation in a room-height Duofix system wall in front of a solid or
drywall construction• For installation in a room-high Duofix system wall• For mounting in front of a solid or drywall construction (order PreWall
brackets 111.844.00.1 separately)• For installation in a load bearing stud work
Characteristics
• Frame height 1120 mm• Frame with holes ø 9 mm for fastening in wood frame construction• Galvanised leg supports, steplessly adjustable 0 - 200 mm• Self-supporting• Frame with C profile 40/40 mm• Powder-coated frame, ultramarine blue• Feet can be retracted 5 cm• Rotating foot plate, for installation in UW50 and UW75 profiles• Fastening plate for support handles made from veneer wood, water-
resistant laminate, adjustable height and depth• Self-locking feet for tool-free alignment of the frame, (friction feet have
to be locked with spanner)
Additional NoteFastening material
Ordering Information
73
300300
R½
1000
230-280
0 30
0-200
180/230 1045-1055
425
1120
130
0
1000-1010
410-460
170 45
48
90-135
2010
Flow pressure range 0.1–10 bar
Operating temperature water max. 25 °C
Flush volume small range 3–4 l
Flush volume factory setting 5.8 and 3 l
Article no. PU1 PU4
111.352.00.5 1 8
Article no. PU1 PU4
111.790.00.1 1 10
50112
365
100
0-20
0
73
85
0
4
48
10 Product and Installation Guide Washroom & Bathroom 2012
Product GuideConcealed cisterns
Geberit acoustic insulation set for wall-hung WC and wall-hung bidet
Application
• For wall-hung WC and wall-hung bidet• For sanitaryware with fixing centres 180 mm or 230 mm• For decoupling solid-borne noise with WC and bidet• Insulation to be trimmed after pan fixed
Characteristics
• White
Product Details
Additional Note2 acoustic insulation sleeves
Ordering Information
Concealed cisterns
Geberit Sigma concealed cistern 12 cm, (UP320)
Application
• For concealed installation• For back to wall floor-standing WCs
Characteristics
• Concealed cistern fully insulated against condensation• Front actuation only• Protection cover for service opening can be mounted without tools
and cut to length• Dual flush with Sigma80, Sigma60, Sigma50, Sigma20, Sigma01 or
Bolero flush plates • Dual flush with dual flush pneumatic and mechanical buttons• Single flush with Sigma10, Rumba, Mambo or Tango flush plates • Single flush with touchless flush or pneumatic buttons• Water supply connection at centre back or at the top• Flush bend has maximum 8 cm adjustment. Flush can be cut down by
maximum of 8 cm • Installation height 1080 mm (can be cut down, depending on the WC
pan performance)• Minimum install height 950 mm• Fastening bracket adjustable in depth• Cistern can be reversed to give access from behind in a duct situation
when flushed with pneumatic buttons or touchless flush• Flush valve features 6l and 4.5l flush settings to enable either a 6l and
3l flush or a 4.5l and 3l flush. For flush volumes of 4l and 2l a low flush beaker is required (241.894.00.1)
Product Details
Additional NoteWater supply connection R 1/2" male BSP parallel thread with integrated angle stop valve; Protection housing for service opening; Flush pipe ø 45 mm; Fastening for flush bend; Protection plug for flush pipe; 2 slotted flat irons; 2 fastening brackets, pre-mounted; Fastening material; To be installed with a check valve or similar providing backflow prevention protection
Excluded: Flush plate
Ordering Information
Product material PE expanded
Material thickness 6 mm
Article no. PU1 PU2 PU4
156.050.00.1 1 10 200
Concealed cisterns
Flow pressure range 0.1–10 bar
Operating temperature water max. 25 °C
Flush volume small range 3–4 l
Flush volume factory setting 5.8 and 3 l
Article no. PU1 PU4
109.309.00.5 1 20
41
108
51
1045
235
23
100
R1/2
57
30
135
0
365
845
0
100
12 2-9
16-205
Product GuideConcealed cisterns
Product and Installation Guide Washroom & Bathroom 2012 11
Geberit Sigma concealed cistern 8 cm, front actuation (UP720)
Application
• For solid construction• For floor standing WC• For concealed installation
Characteristics
• Concealed cistern fully insulated against condensation• Front actuation only• Concealed cistern for simple installation and tool-free repair works• Protection cover for service opening can be mounted without tools
and cut to length• Universal water supply connection compatible with MeplaFix, can be
mounted and operated without tools• Connection hose to angle stop valve can be screwed without tools• Dual flush with Sigma80, Sigma60, Sigma50, Sigma20, Sigma01 or
Bolero flush plates• Single flush with Sigma10, Rumba, Tango and Mambo • Flush bend has maximum 8 cm adjustment. Flush can be cut down by
maximum of 8 cm • Adjustable flushing volume• Water supply connection at the top, offset to the left side• Flush bend adjustable, 2 cm upwards and 1 cm downwards
Product Details
Additional NoteWater supply connection R 1/2" male BSP parallel thread with integrated angle stop valve and hand wheel; Flush bend; Protection housing for service opening; Fastening material; Protection plug for flush bend; To be installed with a check valve or similar providing backflow prevention protection
Excluded: Flush plate
Ordering Information
Geberit Kappa concealed cistern 15 cm (UP200)
Application
• For concealed installation• For back to wall floor-standing WCs
Characteristics
• Front or top actuation• Installation depth adjustable 18 cm - 24.5 cm• Fully insulated against condensation• Water supply connection left• Dual flush with Kappa flush plates• Dual flush with dual flush pneumatic and mechanical buttons• Single flush with single flush pneumatic buttons• Connection hose to angle stop valve can be screw-connected by
hand• Flush bend, welded• Fast adjustment of the actuator rods for flush plate• Cistern height 82 cm• To reduce flush volume to either 4.5/3 litre dual flush or 4/2.6 litre dual
flush requires material number 242.310.00.1 (note: must be used with pans designed for low volume flush)
Product Details
Additional NoteWater supply connection R 1/2" male BSP parallel thread with integrated angle stop valve; Protection housing for service opening; Protection plug for flush bend; Fastening for flush bend; 2 fastening brackets, pre-mounted; Fastening material; To be installed with a check valve or similar providing backflow prevention protection
Excluded: Flush plate
Ordering Information
Flow pressure range 0.1–10 bar
Operating temperature water max. 25 °C
Flush volume factory setting 5.8 and 3 l
Flush volume small 3 l
Article no. PU1 PU4 Price£
109.772.00.1 1 32 150.08
0
R1/2
8
505
67
607
65–80
87
X
110
-15
≥ 30
8 1–5
110
0
87
-15
Flow pressure range 0.1–10 bar
Operating temperature water max. 25 °C
Flush volume small range 3–4 l
Flush volume factory setting 5.8 and 3 l
Article no. PU1 PU4
109.200.00.1 1 27
X
465
57
13
335465
0
9
18
min.3
0
max.9
25
max.9
12 Product and Installation Guide Washroom & Bathroom 2012
Product GuideConcealed cisterns
Geberit Kappa concealed cistern 15 cm (UP200), extended flush pipe
Application
• For floor-standing and wall-hung WCs• For private and semi-public areas• For concealed installation
Characteristics
• Front or top actuation• Installation depth adjustable 18 cm - 24.5 cm• Protection housing for service opening, can be cut to length• Fully insulated against condensation• Water supply connection left• Dual flush with Kappa flush plates• Dual flush with dual flush pneumatic and mechanical buttons• Single flush with single flush pneumatic buttons• Connection hose to angle stop valve can be screw-connected by
hand• Flush bend, welded• Fast adjustment of the actuator rods for flush plate• Cistern height 98 cm• To reduce flush volume to either 4.5/3 litre dual flush or 4/2.6 litre dual
flush requires material number 242.310.00.1 (note: must be used with pans designed for low volume flush)
Product Details
Additional NoteWater supply connection R 1/2" male BSP parallel thread with integrated angle stop valve; Protection housing for service opening; Protection plug for flush bend; WC connection set, ø 90 mm; 2 fastening brackets, pre-mounted; Fastening material; To be installed with a check valve or similar providing backflow prevention protection
Excluded: Flush plate
Ordering Information
Geberit exposed cistern type 123, low-mounted, 9 l, water supply connection left/right, with pneumatic lifter
Application
• For concealed installation• For back to wall floor-standing WCs
Characteristics
• Fully insulated against condensation• Impuls380 side filling valve• Cover without button• Water supply connection left and right• Flush pipe connection fitted• Single flush with single flush pneumatic buttons• 300 mm extention pipe available (118.131.11.1)
Product Details
Additional NoteFlush bend 39 x 35 cm, ø 50/44 mm; Pneumatic actuation unit; Fastening material; To be installed with a check valve or similar providing backflow prevention protection
Excluded: Angle stop valve R 1/2"; Pneumatic push button
Ordering InformationFlow pressure range 0.1–10 bar
Operating temperature water max. 25 °C
Flush volume small range 3–4 l
Flush volume factory setting 5.8 and 3 l
Article no. PU1
109.211.00.1 1
X
465
57
13
465
595
0
9
18
min.3
0
max.9
25
max.9
Fill time (6 l) at 3 bar flow pressure 30 s
Fill time (9 l) at 3 bar flow pressure 45 s
Flush volume range 6 / 9 l
Drainage capacity 2.2–2.9 l/s
Flush volume factory setting 9 l
Article no. Colour PU1 PU4
123.137.11.1 White 1 24
305–3
41
33
3838
128
45
65
65
Product GuideWC flush plates
Product and Installation Guide Washroom & Bathroom 2012 13
Geberit concealed cistern for low height furniture, pneumatic, dual flush
Application
• For installation in low height bathroom furniture (minimum height 790 mm from finished floor)
• For back to wall floor-standing WCs
Characteristics
• Pneumatic flush actuation• Water supply connection at the bottom left• Top or front access• Includes dual flush pneumatic button
Product Details
Additional NoteDual flush actuator; Flush bend; Sleeve; Fastening material; To be installed with a check valve or similar providing backflow prevention protection
Ordering Information
WC flush plates
Geberit flush plate Sigma01 for dual flush, plastic New
Application
• For dual flush• For use with Geberit Sigma concealed cistern 12 cm (UP320) and
8 cm (UP720)• Not suitable for use with Geberit Kappa concealed cistern 15 cm
(UP200)
Product Details
Additional NoteActuator rods; Distance bolts; Mounting frame
Ordering Information
Flow pressure range 0.1–10 bar
Operating temperature water max. 25 °C
Flush volume factory setting 5.5 and 3 l
Article no. PU1 PU4
109.720.00.1 1 24
30
464
355
45
94
98 8
15
8
R1/2
132
65 29
75-16
9
M64x2
WC flush plates
Actuation force < 20 N
Product material Plastic
Article no. Colour PU1 PU2 PU4
115.770.10.5 bahama beige 1 10 180
115.770.11.5 white alpine 1 10 180
115.770.21.5 gloss chrome 1 10 180
115.770.46.5 matt chrome 1 10 180
115.770.CG.5 manhattan 1 10 180
115.770.DK.5 edelweiss 1 10
115.770.DT.5 fine brass 1 10
115.770.DW.5 jet black RAL 9005 1 10 180
115.770.EP.5 pergamon 1 10 180
115.770.FB.5 agais 1 10
115.770.FR.5 star white 1 10
115.770.GM.5 satinox 1 10 180
115.770.KA.5 gloss / matt chrome 1 10 180
246
164
13
14 Product and Installation Guide Washroom & Bathroom 2012
Product GuideWC flush plates
Geberit flush plate Sigma10 for single flush, plastic
Application
• For Geberit Sigma concealed cistern 12 cm (UP320) and 8 cm (UP720)
• For single flush• Not suitable for Geberit Kappa concealed cisterns (UP200)
Product Details
Additional NoteMounting frame; Push rod; Distance bolts
Ordering Information
Geberit flush plate Sigma20 for dual flush, stainless steel New
Application
• For dual flush• For use with Geberit Sigma concealed cistern 12 cm (UP320) and
8 cm (UP720)• Not suitable for use with Geberit Kappa concealed cistern 15 cm
(UP200)
Product Details
Additional NoteMounting frame; Distance bolts; Actuator rods
Ordering Information
Geberit flush plate Sigma20 for dual flush, stainless steel, can be locked with screws New
Application
• For dual flush• For use with Geberit Sigma concealed cistern 12 cm (UP320) and
8 cm (UP720)• Not suitable for use with Geberit Kappa concealed cistern 15 cm
(UP200)
Characteristics
• Can be locked with screws
Product Details
Additional NoteMounting frame; Distance bolts; Actuator rods
Ordering Information
Geberit flush plate Sigma20 for dual flush, plastic
Application
• For Geberit Sigma concealed cistern 12 cm (UP320) and 8 cm (UP720)
• For dual flush• Not suitable for use with Geberit Kappa concealed cistern 15 cm
(UP200)
Product Details
Additional NoteMounting frame; Distance bolts; Actuator rods
Ordering Information
Actuation force < 20 N
Product material Plastic
Article no. Colour PU1 PU2 PU4
115.758.KJ.1 white / gloss chrome / white 1 10 180
115.758.KK.1 white / gold-plated / white 1 10 180
115.758.KL.1 white / matt chrome / matt chrome 1 10 180
115.758.KM.1 black / gloss chrome / black 1 10 180
115.758.KH.1gloss chrome / matt chrome / gloss chrome
1 10 180
115.758.KN.1matt chrome / gloss chrome / matt chrome
1 10 180
Actuation force < 20 N
Product material Stainless steel
Article no. Colour PU1 PU2
115.778.SN.1 stainless steel 1 10
164
246 11
164
246 11
Actuation force < 20 N
Product material Stainless steel
Article no. Colour PU1 PU2
115.781.SN.1 stainless steel 1 10
Actuation force < 20 N
Product material Plastic
Article no. Colour PU1 PU2 PU4
115.778.KJ.1 white / gloss chrome / white 1 10 180
115.778.KK.1 white / gold-plated / white 1 10 180
115.778.KL.1 white / matt chrome / matt chrome 1 10 180
115.778.KM.1 black / gloss chrome / black 1 10 180
115.778.KH.1gloss chrome / matt chrome / gloss chrome
1 10 180
115.778.KN.1matt chrome / gloss chrome / matt chrome
1 10 180
164
246 11
164
246 11
Product GuideWC flush plates
Product and Installation Guide Washroom & Bathroom 2012 15
Geberit flush plate Sigma40 for dual flush with integrated odour extraction, glass New
Application
• For dual flush• For use with Geberit Sigma concealed cistern 12 cm (UP320) with
connection for odour extraction unit with filtration 111.353.00.5• For front actuation• For direct odour extraction from the WC ceramic appliance• For odour neutralisation through an active carbon filter• For installation in walls with up to 6 cm covering thickness (with
extension set)• For adding in-cistern blocks without chlorine or oxidising components• Not suitable for use with Geberit Kappa (UP200) concealed cistern 15
cm and Geberit Sigma concealed cistern 8 cm (UP720)
Characteristics
• Odour extraction unit with filtration integrated in the concealed cistern• Ventilation and control unit with radial fan, can be installed without
tools• LED display for filter replacement• Odour neutralisation with active carbon filter• Push-button for switching the odour extraction unit on and off• Automatic switching off of the odour extraction unit after a predefined
running time• Tool-free replacement of the active carbon filter• Tool-free insertion of in-cistern blocks
Product Details
Additional NoteMounting frame with swivelling mechanism; Distance rods; Actuator rods; Ventilation and control unit; Power supply unit with LED display; Cable connection with plug; Active carbon filter type 1; Cover; Insert for in-cistern blocks; Moisture protection on conduit pipe
Ordering Information
Geberit flush plate Sigma40 for dual flush with integrated odour extraction, plastic New
Application
• For dual flush• For use with Geberit Sigma concealed cistern 12 cm (UP320) with
connection for odour extraction unit with filtration 111.353.00.5• For front actuation• For direct odour extraction from the WC ceramic appliance• For odour neutralisation through an active carbon filter• For installation in walls with up to 6 cm covering thickness (with
extension set)• For adding in-cistern blocks without chlorine or oxidising components• Not suitable for use with Geberit Kappa (UP200) concealed cistern 15
cm and Geberit Sigma concealed cistern 8 cm (UP720)
Characteristics
• Odour extraction unit with filtration integrated in the concealed cistern• Ventilation and control unit with radial fan, can be installed without
tools• LED display for filter replacement• Odour neutralisation with active carbon filter• Push-button for switching the odour extraction unit on and off• Automatic switching off of the odour extraction unit after a predefined
running time• Tool-free replacement of the active carbon filter• Tool-free insertion of in-cistern blocks
Product Details
Additional NoteMounting frame with swivelling mechanism; Distance rods; Actuator rods; Ventilation and control unit; Power supply unit with LED display; Cable connection with plug; Active carbon filter type 1; Cover; Insert for in-cistern blocks; Moisture protection on conduit pipe
Ordering Information
Actuation force < 20 N
Product materialGlass/aluminium-plastic composite
Nominal voltage 230 V AC
Mains frequency 50 Hz
Operating voltage 12 V DC
Power consumption 3 W
Air volume flow rate odour extraction unit 8.5 m3/h
Protection degree IP x4
Protection class III
Article no. Colour PU1 PU2
115.600.SI.1 white glass 1 4
115.600.SJ.1 black glass 1 4
115.600.SQ.1 umbra glass 1 4
266
182
22
2−45 (6)
Actuation force < 20 N
Product materialPlastic/aluminium-plastic composite
Nominal voltage 230 V AC
Mains frequency 50 Hz
Operating voltage 12 V DC
Power consumption 3 W
Air volume flow rate odour extraction unit 8.5 m3/h
Protection degree IP x4
Protection class III
Article no. Colour PU1 PU2 PU4
115.600.KQ.1 white plastic 1 4 64
115.600.KR.1 black plastic 1 4
266
182
22
2−45 (6)
16 Product and Installation Guide Washroom & Bathroom 2012
Product GuideWC flush plates
Geberit flush plate Sigma50 for dual flush, for customisation
Application
• For Geberit Sigma concealed cistern 12 cm (UP320) and 8 cm (UP720)
• For dual flush• For customer to install a bespoke finish with max. of 3 mm depth• Not suitable for use with Geberit Kappa concealed cistern 15 cm
(UP200)
Product Details
Additional NoteMounting frame; Distance bolts; Actuator rods
Excluded: Design cover
Ordering Information
Geberit flush plate Sigma50 for dual flush, glass
Application
• For Geberit Sigma concealed cistern 12 cm (UP320) and 8 cm (UP720)
• For dual flush• Not suitable for use with Geberit Kappa concealed cistern 15 cm
(UP200)
Product Details
Additional NoteMounting frame; Distance bolts; Actuator rods
Ordering Information
Geberit flush plate Sigma50 for dual flush, plastic
Application
• For Geberit Sigma concealed cistern 12 cm (UP320) and 8 cm (UP720)
• For dual flush• Not suitable for use with Geberit Kappa concealed cistern 15 cm
(UP200)
Product Details
Additional NoteMounting frame; Distance bolts; Actuator rods
Ordering Information
Geberit flush plate Sigma50 for dual flush stainless steel
Application
• For dual flush• For Geberit Sigma concealed cistern 12 cm (UP320) and 8 cm
(UP720)• For front actuation• Not suitable for use with Geberit Kappa concealed cistern 15 cm
(UP200)
Product Details
Additional NoteMounting frame; Distance bolts; Actuator rods; Fastening material
Ordering Information
Actuation force < 20 N
Product material Die-cast zinc
Article no. Colour PU1 PU2
115.788.00.1 for customisation 1 5
Actuation force < 20 N
Product material Die-cast zinc / glass
Article no. Colour PU1 PU2
115.788.SC.1 white grains 1 5
115.788.SE.1 green satinised 1 5
115.788.SD.1 smoked glass reflective 1 5
164
246 14
164
246 14
Actuation force < 20 N
Product material Die-cast zinc / plastic
Article no. Colour PU1 PU2
115.788.DW.1 black RAL 9005 1 5
115.788.11.1 white 1 5
115.788.EP.1 pergamon 1 5
Actuation force < 20 N
Product material Brass / chrome-plated die-cast zinc
Article no. Colour PU1 PU2
115.788.GH.1 brushed stainless steel 1 5
164
246 14
164
246 14
Product GuideWC flush plates
Product and Installation Guide Washroom & Bathroom 2012 17
Geberit flush plate Sigma50 for dual flush, stainless steel, can be locked with screws
Application
• For installation in vandal resistant systems• For Geberit Sigma concealed cistern 12 cm (UP320) and 8 cm
(UP720)• For dual flush• Not suitable for use with Geberit Kappa concealed cistern 15 cm
(UP200)
Characteristics
• Can be locked with screws
Product Details
Additional NoteMounting frame; Distance bolts; Actuator rods; Fastening material
Ordering Information
Geberit flush plate Sigma50 for dual flush for customisation, can be locked with screws
Application
• For Geberit Sigma concealed cistern 12 cm (UP320) and 8 cm (UP720)
• For dual flush• For installation in vandal resistant systems• For customer to install a bespoke finish with max. of 3 mm depth• Not suitable for use with Geberit Kappa concealed cistern 15 cm
(UP200)
Characteristics
• Can be locked with screws
Product Details
Additional NoteMounting frame; Distance bolts; Actuator rods; Fastening material
Ordering Information
Geberit flush plate Sigma50 for dual flush, glass, can be locked with screws
Application
• For Geberit Sigma concealed cistern 12 cm (UP320) and 8 cm (UP720)
• For dual flush• Not suitable for use with Geberit Kappa concealed cistern 15 cm
(UP200)
Characteristics
• Can be locked with screws
Product Details
Additional NoteMounting frame; Distance bolts; Actuator rods; Fastening material
Ordering Information
Geberit flush plate Sigma50 for dual flush, plastic, can be locked with screws
Application
• For Geberit Sigma concealed cistern 12 cm (UP320) and 8 cm (UP720)
• For dual flush• Not suitable for use with Geberit Kappa concealed cistern 15 cm
(UP200)
Characteristics
• Can be locked with screws
Product Details
Additional NoteMounting frame; Distance bolts; Actuator rods; Fastening material
Ordering Information
Actuation force < 20 N
Product material Brass / chrome-plated die-cast zinc
Article no. Colour PU1 PU2
115.785.GH.1 brushed stainless steel 1 5
Actuation force < 20 N
Article no. Colour PU1 PU2
115.785.00.1 for customisation 1 5
164
246 14
164
246 14
Actuation force < 20 N
Product material Die-cast zinc / glass
Article no. Colour PU1 PU2
115.785.SC.1 white grains 1 5
115.785.SD.1 smoked glass reflective 1 5
115.785.SE.1 green glass satinised 1 5
Actuation force < 20 N
Product material Die-cast zinc / plastic
Article no. Colour PU1 PU2
115.785.11.1 white alpine 1 5
115.785.DW.1 black RAL 9005 1 5
115.785.EP.1 pergamon 1 5
164
246 14
164
246 14
18 Product and Installation Guide Washroom & Bathroom 2012
Product GuideWC flush plates
Geberit flush plate Sigma60 for dual flush, brushed chrome
Application
• For dual flush• For Geberit Sigma concealed cistern 12 cm (UP320) and 8 cm
(UP720)• For front actuation• For use with plaster boarding/panelling 18 - 60 mm • Not suitable for use with Geberit Kappa concealed cistern 15 cm
(UP200)• Not suitable for retrofit
Characteristics
• Surface even actuation• For use with tiles 6–18 mm• Sound-absorbing actuator rods, tool-free, fast adjustment
Product Details
Ordering Information
Cover frame for Geberit flush plate Sigma60, brushed chrome
Application
• For use with Geberit Sigma60 flush plate only
Product Details
Ordering Information
Geberit insert for in-cistern block
Application
• For Geberit Sigma concealed cistern 12 cm (UP320)• For adding in-cistern blocks without chlorine or oxidising components• Not suitable for use with Geberit Sigma concealed cistern 8 cm
(UP720) and Geberit Kappa concealed cistern 15 cm (UP200)• Not suitable for use with the following flush plates: Sigma80,
Sigma60, Bolero, Rumba, Tango, Mambo
Additional NoteCover; Receptacle for in-cistern blocks; Mounting frame with swivelling mechanism
Ordering Information
Geberit flush plate Bolero for dual flush, plastic
Application
• For Geberit Sigma concealed cistern 12 cm (UP320) and 8 cm (UP720)
• For dual flush• Not suitable for use with Geberit Kappa concealed cistern 15 cm
(UP200)
Product Details
Additional NotePush rods; Distance rods; Fastening material
Ordering Information
Product material Die-cast zinc
Actuation force < 25 N
Article no. Colour PU1
115.792.GH.1 brushed chrome 1
Product material Die-cast zinc
Article no. Colour PU1
242.544.GH.1 brushed chrome 1
139
221 18−6 06−18
15
246
164
06
Article no. PU1 PU2
115.612.00.1 1 5
Actuation force < 20 N
Product material Plastic
Article no. Colour PU1 PU2 PU4
115.777.10.1 bahama beige 1 10
115.777.11.1 white 1 10 180
115.777.21.1 gloss chrome 1 10 180
115.777.46.1 matt chrome 1 10 180
115.777.CG.1 manhattan 1 10
115.777.DK.1 edelweiss 1 10
115.777.DT.1 fine brass 1 10
115.777.DW.1 black RAL 9005 1 10
115.777.EP.1 pergamon 1 10 180
115.777.FB.1 agais 1 10
115.777.FR.1 star white 1 10
115.777.GM.1 satinox 1 10
115.777.KB.1 gloss chrome / structured chrome 1 10 180
1-95
164
246 14
Product GuideWC flush plates
Product and Installation Guide Washroom & Bathroom 2012 19
Geberit flush plate Tango for stop-and-go flush, die-cast zinc
Application
• For Geberit Sigma concealed cistern 12 cm (UP320) and 8 cm (UP720)
• For single flush• Not suitable for use with Geberit Kappa concealed cistern 15 cm
(UP200)
Product Details
Additional NotePush rod; Distance rods; Fastening material
Ordering Information
Geberit flush plate Rumba for stop-and-go flush, plastic
Application
• For Geberit Sigma concealed cistern 12 cm (UP320) and 8 cm (UP720)
• For single flush• Not suitable for use with Geberit Kappa concealed cistern 15 cm
(UP200)
Product Details
Additional NotePush rod; Distance rods; Fastening material
Ordering Information
Geberit flush plate Mambo with stop-and-go flush, stainless steel, can be locked with screws
Application
• For Geberit Sigma concealed cistern 12 cm (UP320) and 8 cm (UP720)
• For single flush• Not suitable for use with Geberit Kappa concealed cistern 15 cm
(UP200)
Characteristics
• Can be locked with anti-vandal screws
Product Details
Additional NotePush rod; Distance rods; Fastening material
Ordering Information
Geberit flush plate Kappa20 for dual flush, plastic
Application
• For Geberit Kappa concealed cistern 15 cm (UP200)• For top or front actuation• For dual flush• Not suitable for Geberit Sigma concealed cisterns 12 cm (UP320) and
8 cm (UP720)
Product Details
Additional NotePush rods; Distance rods; Fastening material
Ordering Information
Actuation force < 20 N
Product material Die-cast zinc
Article no. Colour PU1 PU2 PU4
115.760.11.1 white 1 10 180
115.760.21.1 gloss chrome 1 10 180
115.760.45.1 gold-plated 1 10
115.760.46.1 matt chrome 1 10 180
115.760.DT.1 fine brass 1 10
115.760.GM.1 satinox 1 10
115.760.HC.1 palladium 1 10
115.760.KA.1 gloss chrome / matt chrome 1 10
Actuation force < 20 N
Product material Plastic
Article no. Colour PU1 PU2 PU4
115.750.11.1 white 1 10 180
115.750.21.1 gloss chrome 1 10 180
115.750.46.1 matt chrome 1 10 180
115.750.KB.1 gloss chrome / structured chrome 1 10
164
2461
164
246
15
Actuation force < 20 N
Product material Stainless steel
Article no. PU1 PU2 PU4
115.751.00.1 1 10 180
Actuation force < 20 N
Product material Plastic
Article no. Colour PU1 PU2 PU4
115.228.10.1 bahama beige 1 10
115.228.11.1 white 1 10 200
115.228.21.1 gloss chrome 1 10 200
115.228.46.1 matt chrome 1 10 200
115.228.CG.1 manhattan 1 10
115.228.DK.1 edelweiss 1 10
115.228.DT.1 fine brass 1 10
115.228.DW.1 black RAL 9005 1 10
115.228.EP.1 pergamon 1 10 200
115.228.FB.1 agais 1 10
115.228.FR.1 star white 1 10
115.228.GM.1 satinox 1 10
115.228.KB.1 gloss chrome / structured chrome 1 10
164
246 25
142
213 16
20 Product and Installation Guide Washroom & Bathroom 2012
Product GuideWC flush plates
Geberit flush plate Kappa21 for dual flush, plastic
Application
• For Geberit Kappa concealed cistern 15 cm (UP200)• For top or front actuation• For dual flush• Not suitable for Geberit Sigma concealed cisterns 12 cm (UP320) and
8 cm (UP720)
Product Details
Additional NoteMounting frame; Actuator rods; Distance bolts; Fastening material
Ordering Information
Geberit flush plate Kappa50 for dual flush, die-cast zinc
Application
• For Geberit Kappa concealed cistern 15 cm (UP200)• For top or front actuation• For dual flush• Not suitable for Geberit Sigma concealed cisterns 12 cm (UP320) and
8 cm (UP720)
Product Details
Additional NotePush rods; Distance rods; Fastening material
Ordering Information
Cover plate for Geberit Kappa concealed cistern 15 cm (UP200), plastic
Application
• For Geberit Kappa concealed cistern 15 cm (UP200)• Not suitable for Geberit Sigma concealed cisterns 12 cm (UP320) and
8 cm (UP720)
Product Details
Additional NoteDistance rods; Fastening material
Ordering Information
Cover plate for Geberit Sigma concealed cistern 12 cm (UP320), die-cast zinc
Application
• For Geberit Sigma concealed cistern 12 cm (UP320) and 8 cm (UP720)
• Not suitable for use with Geberit Kappa concealed cistern 15 cm (UP200)
Characteristics
• Can be locked with anti-vandal screws
Product Details
Additional NoteDistance rods; Fastening material
Ordering Information
Actuation force < 20 N
Product material Plastic
Article no. Colour
115.240.KJ.1 white / gloss chrome / white
115.240.KH.1 gloss chrome / matt chrome / gloss chrome
115.240.KM.1 black / gloss chrome / black
115.240.KK.1 white / gold-plated / white
115.240.KL.1 white / matt chrome / matt chrome
115.240.KN.1 matt chrome / gloss chrome / matt chrome
Actuation force < 20 N
Product material Die-cast zinc
Article no. Colour PU1 PU2 PU4
115.260.11.1 white 1 10 180
115.260.21.1 gloss chrome 1 10 180
115.260.46.1 matt chrome 1 10 180
115.260.HC.1 palladium 1 10
142
212 14
211
142
15
Product material Plastic
Article no. Colour PU1
115.680.11.1 white 1
115.680.21.1 gloss chrome 1
Product material Die-cast zinc
Article no. Colour PU1 PU2 PU4
115.765.46.1 matt chrome 1 10 180
142
213
164
246
Product GuideRemote flushing kits
Product and Installation Guide Washroom & Bathroom 2012 21
Cover plate for Geberit Sigma concealed cistern 12 cm (UP320), stainless steel
Application
• For Geberit Sigma concealed cistern 12 cm (UP320) and 8 cm (UP720)
• Not suitable for use with Geberit Kappa concealed cistern 15 cm (UP200)
Characteristics
• Can be locked with anti-vandal screws
Product Details
Additional NoteDistance rods; Fastening material
Ordering Information
Extension set for Geberit concealed cistern
Application
• For Geberit Sigma concealed cistern 12 cm (UP320) and 8 cm (UP720) and Geberit Kappa concealed cistern 15 cm
• For extending flush plates up to an outer wall of max. 180 mm• For Sigma01, Sigma10, Sigma20, Sigma50, Rumba, Bolero, Tango,
Mambo and Kappa flush plates
Additional Note2 extensions for push rods; 2 extensions for distance rods; Fastening material
Ordering Information
Remote flushing kits
Geberit palm push WC flush control, pneumatic, single flush, with actuator
Application
• For pneumatic remote flush actuation of Geberit Sigma concealed cisterns 12 cm (UP320) and Geberit Kappa concealed cisterns 15 cm (UP200)
• For single flush• For wall thicknesses of 17 - 25 mm• Not suitable for Geberit Sigma concealed cistern 8 cm (UP720),
concealed cistern type 123 and concealed cistern for low height furniture
Characteristics
• Round design• 53 mm hole required
Product Details
Additional NotePneumatic flush button with bellows; Pneumatic actuation unit; 2 m air hose
Ordering Information
Geberit palm push WC flush control, pneumatic, single flush, without actuator
Application
• For pneumatic remote flush actuation of Geberit concealed cistern type 123
• For single flush• For wall thicknesses of 17 - 25 mm• Not suitable for Geberit Sigma concealed cistern 12cm (UP320), 8 cm
(UP720) and Geberit Kappa concealed cistern 15 cm (UP200)
Characteristics
• Round design• 53 mm hole required
Product Details
Additional NotePneumatic flush button with bellows
Ordering Information
Product material Stainless steel
Article no. PU1 PU2 PU4
115.798.00.1 1 10 180
Article no. PU1 PU2
240.938.00.1 1 10
164
246
Remote flushing kits
Actuation force < 25 N
Article no. Colour PU1 PU2 PU4
115.114.11.1 white 1 10 240
115.114.21.1 gloss chrome 1 10 240
Actuation force < 25 N
Article no. Colour PU1 PU2 PU3
241.199.11.1 white 1 10 100
241.199.21.1 gloss chrome 1 10 100
6
17-25
62 52
43
6
17-25
62 52
43
22 Product and Installation Guide Washroom & Bathroom 2012
Product GuideRemote flushing kits
Geberit finger push WC flush control, pneumatic, single flush, with actuator, metal
Application
• For pneumatic remote flush actuation of Geberit concealed Sigma concealed cisterns 12 cm (UP320) and Geberit Kappa concealed cisterns 15 cm (UP200)
• For single flush• For wall thicknesses of 0 - 30 mm• 50 mm hole required• Not suitable for Geberit Sigma concealed cistern 8 cm (UP720),
concealed cistern type 123 and concealed cistern for low height furniture
Product Details
Additional NotePneumatic flush button with bellows; Pneumatic actuation unit; 2 m air hose
Ordering Information
Geberit finger push WC flush control, pneumatic, single flush, without actuator, metal
Application
• For pneumatic remote flush actuation of Geberit concealed cistern type 123
• For single flush• For wall thicknesses of 0 - 30 mm• 50 mm hole required• Not suitable for Geberit Sigma concealed cistern 12cm (UP320), 8 cm
(UP720) and Geberit Kappa concealed cistern 15 cm (UP200)
Product Details
Additional NotePneumatic flush button with bellows
Ordering Information
Geberit palm push WC flush control, pneumatic, single flush, without actuator, metal
Application
• For pneumatic remote flush actuation of Geberit concealed Sigma concealed cisterns 12 cm (UP320) and Geberit Kappa concealed cisterns 15 cm (UP200)
• For single flush• For wall thicknesses of 0 - 30 mm• 50 mm hole required• Not suitable for Geberit Sigma concealed cistern 8 cm (UP720),
concealed cistern type 123 and concealed cistern for low height furniture
Product Details
Additional NotePneumatic flush button with bellows; Pneumatic actuation unit; 2 m air hose
Ordering Information
Geberit palm push WC flush control, pneumatic, single flush, without actuator, metal
Application
• For pneumatic remote flush actuation of Geberit concealed cistern type 123
• For single flush• For wall thicknesses of 0 - 30 mm• 50 mm hole required• Not suitable for Geberit Sigma concealed cistern 12cm (UP320), 8 cm
(UP720) and Geberit Kappa concealed cistern 15 cm (UP200)
Product Details
Additional NotePneumatic flush button with bellows
Ordering Information
Actuation force < 25 N
Article no. Colour PU1 PU3 PU4
115.947.00.1 stainless steel 1 12
115.947.21.1 gloss chrome 1 12 360
Actuation force < 25 N
Article no. Colour PU1 PU3
241.198.21.1 gloss chrome 1 12
241.198.00.1 stainless steel 1
122
0 - 30
63
63
122
0 - 30
Actuation force < 25 N
Article no. Colour PU1 PU3
115.949.21.1 gloss chrome 1 12
Actuation force < 25 N
Article no. Colour PU1
241.282.21.1 gloss chrome 1
63
122
0 - 30
63
122
0 - 30
Product GuideRemote flushing kits
Product and Installation Guide Washroom & Bathroom 2012 23
Geberit WC flush control, pneumatic, single flush, for institutions, metal
Application
• For pneumatic remote flush actuation of Geberit concealed cistern type 123
• For single flush• For wall thicknesses of 0 - 170 mm• Not suitable for Geberit Sigma concealed cistern 12cm (UP320), 8 cm
(UP720) and Geberit Kappa concealed cistern 15 cm (UP200)
Product Details
Additional NotePneumatic flush button with bellows and sleve
Ordering Information
Geberit WC flush control, pneumatic, single flush, for institutions, metal
Application
• For pneumatic remote flush actuation of Geberit concealed Sigma concealed cisterns 12 cm (UP320) and Geberit Kappa concealed cisterns 15 cm (UP200)
• For single flush• For wall thicknesses of 60 - 270 mm• Not suitable for Geberit Sigma concealed cistern 8 cm (UP720)
Characteristics
• Round design• 45 mm hole required
Product Details
Additional NotePneumatic actuation unit; 2 m air hose
Ordering Information
Geberit WC flush control, pneumatic, single flush, plastic
Application
• For pneumatic remote single flush actuation of Geberit Sigma concealed cisterns 12 cm (UP320), Geberit Kappa concealed cisterns 15 cm (UP200) and concealed cistern type 123
• For single flush• Not suitable for Geberit Sigma concealed cistern 8 cm (UP720)
Characteristics
• Square design
Product Details
Additional NoteConduit pipe, 1.7 m; 2 m air hose; Concealed housing; Pneumatic actuator; Protection housing; Fastening material
Ordering Information
Geberit WC flush control, pneumatic, dual flush, plastic
Application
• For pneumatic remote flush actuation of Geberit concealed Sigma concealed cisterns 12 cm (UP320) and Geberit Kappa concealed cisterns 15 cm (UP200)
• For dual flush• Not suitable for Geberit Sigma concealed cistern 8 cm (UP720),
concealed cistern type 123 and concealed cistern for low height furniture
Characteristics
• Square design
Product Details
Additional NoteConduit pipe, 1.7 m; 2 m air hose; Concealed housing; Pneumatic actuator; Protection housing; Fastening material
Ordering Information
Actuation force < 25 N
Article no. Colour PU1 PU2
241.144.00.1 stainless steel 1 8
Actuation force < 25 N
Article no. Colour PU1 PU2 PU4
115.943.21.1 gloss chrome 1 10 120
63
264
0 - 170
37
6-27
Actuation force < 25 N
Article no. Colour PU1 PU2 PU4
115.941.11.1 white 1 10 120
115.941.KA.1 gloss chrome / matt chrome 1 10 120
Actuation force < 25 N
Article no. Colour PU1 PU2 PU4
115.942.11.1 white 1 10 120
115.942.KA.1 gloss chrome / matt chrome 1 10 120
108
108
108
108
24 Product and Installation Guide Washroom & Bathroom 2012
Product GuideRemote flushing kits
Geberit WC flush control, pneumatic, dual flush, for furniture
Application
• For pneumatic remote flush actuation of Geberit concealed Sigma concealed cisterns 12 cm (UP320) and Geberit Kappa concealed cisterns 15 cm (UP200)
• For dual flush• 65 mm hole required• Not suitable for Geberit Sigma concealed cistern
Characteristics
• Round design
Product Details
Additional NotePneumatic actuation unit; 2 m air hose
Ordering Information
Geberit WC flush control, cable actuator, dual flush, drywall construction, plastic
Application
• For drywall construction• For Geberit Kappa concealed cistern 15 cm (UP200)• For dual flush• Not suitable for Geberit Sigma concealed cistern 8 cm (UP720),
concealed cistern type 123 and concealed cistern for low height furniture
Characteristics
• Flush actuation using cable actuator• Actuator made of plastic• Fastening for actuator on the back with counter nut• Length of the cable actuator cannot be changed• 45 mm hole required
Product Details
Additional NoteDual flush actuator with cable actuators; Lifter for installation on flush valve; Protective pipe; Counter nut with extension; Fastening material
Ordering Information
Geberit WC flush control, cable actuator, dual flush, drywall construction, metal
Application
• For drywall construction• For Geberit Kappa concealed cistern 15 cm (UP200)• For dual flush• Not suitable for Geberit Sigma concealed cistern 8 cm (UP720),
concealed cistern type 123 and concealed cistern for low height furniture
Characteristics
• Flush actuation using cable actuator• Actuator made of die-cast zinc• Fastening for actuator on the back with counter nut• Length of the cable actuator cannot be changed• 45 mm hole required
Product Details
Additional NoteDual flush actuator with cable actuators; Lifter for installation on flush valve; Protective pipe; Counter nut with extension; Fastening material
Ordering Information
Geberit WC flush control, pneumatic, foot actuation wall
Application
• For pneumatic remote single flush actuation of Geberit Sigma concealed cisterns 12 cm (UP320), Geberit Kappa concealed cistern 15 cm (UP200), concealed cistern type 123 and concealed cistern for low height furniture
• For single flush• For installation in floor• Not suitable for Geberit Sigma concealed cistern 8 cm (UP720)
Product Details
Additional NoteConduit pipe, 3 m; Pneumatic hose, 3.5 m; Pneumatic actuation unit; Fastening material
Ordering Information
Actuation force < 25 N
Article no. Colour PU1 PU2 PU4
115.999.21.1 gloss chrome 1 10 240
Product material Plastic
Article no. Colour PU1 PU2
115.075.21.1 gloss chrome 1 10
8
8 9
M64x2
min. 15- max. 18
Ø 65 ø 45
85
52
13
035
Product material Die-cast zinc
Article no. Colour PU1 PU2
115.075.21.Z gloss chrome 1 10
Actuation force < 25 N
Article no. PU1 PU2 PU4
115.918.00.1 1 10 120
Ø 65 ø 45
85
52
13
035
11
154
Product GuideRemote flushing kits
Product and Installation Guide Washroom & Bathroom 2012 25
Geberit WC flush control, pneumatic, foot actuation floor
Application
• For pneumatic remote single flush actuation of Geberit Sigma concealed cisterns 12 cm (UP320), Geberit Kappa concealed cistern 15 cm (UP200), concealed cistern type 123 and concealed cistern for low height furniture
• For single flush• For solid construction• For installation in floor• For drywall construction• For pneumatic remote control flush actuation of Geberit surface-
mounted and concealed cisterns• Not suitable for Geberit Sigma concealed cistern 8 cm (UP720)
Product Details
Additional NoteConduit pipe, 3 m; Pneumatic hose, 3.5 m; Pneumatic actuation unit; Protection box made of EPS; Fastening material
Ordering Information
Geberit flush plate Mambo for single flush, mains operation, touchless for Geberit Sigma concealed cistern 8 cm (UP720)
Application
• For use with Geberit Sigma concealed cistern 8 cm (UP720)• For use with the Mambo IRBA flush plate• Not suitable for barrier-free and wheelchair-suitable construction• Not suitable for Geberit Sigma concealed cisterns 12 cm (UP320),
Geberit Kappa concealed cistern 15 cm (UP200), concealed cistern type 123 and concealed cistern for low height furniture
• Not suitable for use with Geberit insert for in-cistern block
Characteristics
• Infra-red user detection• Self-calibrating infra-red control• Infra-red detection with background fade-out• Driven by servo motor• Operation with extra-low voltage – no mains voltage in the cistern• Self-calibrating electrical lifting device• Low-noise lifting mechanism• Automatic flush release• Manual, touchless flush release• Manual flush actuation using flush plate• Triggers a full flush• Minimum detection time can be set• Initial flush can be set• Repeat flush can be set• Flush actuator made of stainless steel, can be connected with anti-
vandal screws• Flush actuation can be deactivated using Geberit Clean Handy• Flush actuation settings can be made and checked, using Geberit
Service Handy• Plug connection with cross-polarity protection• Easy maintenance and cleaning• Easy installation and servicing• Requires transformer 115.861.00.1
Product Details
Additional NoteActuator plate Mambo IRBA with infra-red window, stainless steel; Mounting frame with infra-red control, pre-mounted; Cradle with servo motor and lifting device, pre-mounted; Push rod; Distance rods; Fastening material
Excluded: Power supply unit 115.861.00.1
Ordering Information
Actuation force < 25 N
Article no. PU1 PU2 PU4
115.939.00.1 1 10 120
33
12
12
Interval flush adjustment range 1–168 h
Interval flush factory setting 24 h
Activation time 7 s
Activation time range 1–60 s
Operating voltage 4.1 V DC
Nominal voltage 230 V AC
Mains frequency 50 Hz
Protection degree IP 45
Article no. Colour PU1
115.855.00.1 stainless steel 1
26 Product and Installation Guide Washroom & Bathroom 2012
Product GuideRemote flushing kits
Geberit flush plate Mambo for single flush, mains operation, touchless for Geberit Sigma concealed cistern 12 cm (UP320)
Application
• For use with Geberit Sigma concealed cistern 12 cm (UP320)• For use with the Mambo IRBA flush plate• Not suitable for barrier-free and wheelchair-suitable construction• Not suitable for Geberit Sigma concealed cistern 8 cm (UP720),
Geberit Kappa concealed cistern 15 cm (UP200), concealed cistern type 123 and concealed cistern for low height furniture
• Not suitable for use with Geberit insert for in-cistern block
Characteristics
• Infra-red user detection• Self-calibrating infra-red control• Infra-red detection with background fade-out• Driven by servo motor• Operation with extra-low voltage – no mains voltage in the cistern• Self-calibrating electrical lifting device• Low-noise lifting mechanism• Automatic flush release• Manual, touchless flush release• Manual flush actuation using flush plate• Triggers a full flush• Minimum detection time can be set• Initial flush can be set• Repeat flush can be set• Flush actuator made of stainless steel, can be connected with anti-
vandal screws• Flush actuation can be deactivated using Geberit Clean Handy• Flush actuation settings can be made and checked, using Geberit
Service Handy• Plug connection with cross-polarity protection• Easy maintenance and cleaning• Easy installation and servicing• Requires transformer 115.861.00.1
Product Details
Additional NoteActuator plate Mambo IRBA with infra-red window, stainless steel; Mounting frame with infra-red control, pre-mounted; Cradle with servo motor and lifting device, pre-mounted; Cover; Push rod; Distance rods; Fastening material
Excluded: Power supply unit 115.861.00.1
Ordering Information
Geberit flush plate Sigma80 for dual flush, mains operation, touchless for Sigma 12 cm (UP320)
New
Application
• For use with Geberit Sigma concealed cistern 12 cm (UP320)• Not suitable for Geberit Sigma concealed cistern 8 cm (UP720),
Geberit Kappa concealed cistern 15 cm (UP200), concealed cistern type 123 and concealed cistern for low height furniture
• Not suitable for use with Geberit insert for in-cistern block
Characteristics
• Flush plate made of glass, interlockable• Manual, touchless flush release• Flush plate without mechanical buttons• Flush buttons identifiable by light bars• Button illumination can be set in five colours• Dual flush• Self-calibrating electrical lifting device• Low-noise lifting mechanism• Electrical power supply via power supply unit• Operation with extra-low voltage – no mains voltage in the cistern• Plug connection with cross-polarity protection• Button illumination activated when approached• Infra-red user detection• Self-calibrating infra-red control• Infra-red detection with background fade-out• Flush actuation possible via external push-button• Setting and interrogation option with Geberit Service Handy• Flush actuation can be deactivated using Geberit Clean Handy• Flush actuation can be manually deactivated for cleaning• Minimum detection time can be set• Initial flush can be set• Repeat flush can be set• Automatic flush actuation can be activated• Easy maintenance and cleaning• Easy installation and servicing• Requires transformer 115.861.00.1• Minimum wall thickness 20 mm
Product Details
Additional NoteFlush plate; Mounting frames; Cradle with servo motor and lifting device, pre-mounted; Fastening material
Excluded: Power supply unit 115.861.00.1
Ordering Information
The Geberit Sigma80 range is only available to displaying retailers. Please contact your local area sales manager for further information
Interval flush adjustment range 1–168 h
Interval flush factory setting 24 h
Activation time 7 s
Activation time range 1–60 s
Operating voltage 4.1 V DC
Nominal voltage 230 V AC
Mains frequency 50 Hz
Protection degree IP 45
Article no. Colour PU1
115.890.00.1 stainless steel 1
Operating voltage 4.1 V DC
Nominal voltage 230 V AC
Mains frequency 50 Hz
Protection degree IP 45
Article no. Colour PU1
116.090.SG.1 black glass 1
116.090.SM.1 mirrored glass 1
247
164
1
37
Product GuideRemote flushing kits
Product and Installation Guide Washroom & Bathroom 2012 27
Geberit flush plate Sigma80 for dual flush, mains operation, touchless for Sigma 8 cm (UP720) New
Application
• For use with Geberit Sigma concealed cistern 8 cm (UP720)• Not suitable for Geberit Sigma concealed cisterns 12 cm (UP320),
Geberit Kappa concealed cistern 15 cm (UP200), concealed cistern type 123 and concealed cistern for low height furniture
• Not suitable for use with Geberit insert for in-cistern block
Characteristics
• Flush plate made of glass, interlockable• Manual, touchless flush release• Flush plate without mechanical buttons• Flush buttons identifiable by light bars• Button illumination can be set in five colours• Dual flush• Self-calibrating electrical lifting device• Low-noise lifting mechanism• Electrical power supply via power supply unit• Operation with extra-low voltage – no mains voltage in the cistern• Plug connection with cross-polarity protection• Button illumination activated when approached• Infra-red user detection• Self-calibrating infra-red control• Infra-red detection with background fade-out• Flush actuation possible via external push-button• Setting and interrogation option with Geberit Service Handy• Flush actuation can be deactivated using Geberit Clean Handy• Flush actuation can be manually deactivated for cleaning• Minimum detection time can be set• Initial flush can be set• Repeat flush can be set• Automatic flush actuation can be activated• Easy maintenance and cleaning• Easy installation and servicing• Requires transformer 115.861.00.1• Minimum wall thickness 20 mm
Product Details
Additional NoteFlush plate; Mounting frames; Cradle with servo motor and lifting device, pre-mounted; Fastening material
Excluded: Power supply unit 115.861.00.1
Ordering Information
The Geberit Sigma80 range is only available to displaying retailers. Please contact your local area sales manager for further information
Geberit flush plate Mambo for single flush, battery operation, touchless for Sigma 12 cm (UP320)
Application
• For use with Geberit Sigma concealed cistern 12 cm (UP320)• For use with the Mambo IRBA flush plate• Not suitable for barrier-free and wheelchair-suitable construction• Not suitable for Geberit Sigma concealed cistern 8 cm (UP720),
Geberit Kappa concealed cistern 15 cm (UP200), concealed cistern type 123 and concealed cistern for low height furniture
Characteristics
• Infra-red user detection• Self-calibrating infra-red control• Infra-red detection with background fade-out• Driven by servo motor• Operation with extra-low voltage – no mains voltage in the cistern• Self-calibrating electrical lifting device• Low-noise lifting mechanism• Automatic flush release• Manual, touchless flush release• Manual flush actuation using flush plate• Triggers a full flush• Minimum detection time can be set• Initial flush can be set• Repeat flush can be set• Flush actuator made of stainless steel, can be connected with anti-
vandal screws• Flush actuation can be deactivated using Geberit Clean Handy• Flush actuation settings can be made and checked, using Geberit
Service Handy• Plug connection with cross-polarity protection• Easy maintenance and cleaning• Easy installation and servicing
Product Details
Additional NoteActuator plate Mambo IRBA with infra-red window, stainless steel; Mounting frame with infra-red control and battery compartment, pre-mounted; Cradle with servo motor and lifting device, pre-mounted; 2 batteries, each 1.5 V LR20 alkaline; Cover; Push rod; Distance rods; Fastening material
Ordering Information
Operating voltage 4.1 V DC
Nominal voltage 230 V AC
Mains frequency 50 Hz
Protection degree IP 45
Article no. Colour PU1
116.091.SG.1 black glass 1
116.091.SM.1 mirrored glass 1
247
164
1
37
Interval flush adjustment range 1–168 h
Interval flush factory setting 24 h
Activation time 7 s
Activation time range 1–60 s
Operating voltage 3 V DC
Battery type LR20
Article no. Colour PU1
115.891.00.1 stainless steel 1
28 Product and Installation Guide Washroom & Bathroom 2012
Product GuideMonolith sanitary modules
Geberit WC flush control, electronic, touchless
Application
• For automatic flush actuation of Geberit Sigma concealed cistern 12 cm (UP320)
• For single flush• Not suitable for Geberit Sigma concealed cistern 8 cm (UP720),
Geberit Kappa concealed cistern 15 cm (UP200), concealed cistern type 123 and concealed cistern for low height furniture
Product Details
Additional NotePower supply unit; Installation phase box for power supply unit; Electrical lifting device for flush valve with control electronics
Ordering Information
Geberit installation set for Geberit WC flush control, electronic
Application
• For concealed installation in solid or drywall construction• For preparing the mains connection for WC flush actuators• For concealed cistern from year of construction 2002 onwards
Characteristics
• Transforming the mains voltage to extra-low voltage 4.1 V DC
Product Details
Additional NotePower supply unit; Concealed outlet for drilling diameter ø 76 mm; Cover for concealed outlet; Conduit pipe, 1.7 m; Pipe entry
Ordering Information
Connection cable 2m WC flush control for Sigma80
Ordering Information
Monolith sanitary modules
Geberit Monolith sanitary module for wall-hung WC, H101, with outlet pipe connection
Application
• For wall mounted WC with 240 - 260 mm wall drainage outlet (for further drainage outlet options please see accessories on page 70)
• For use in wall outlet connections, outlet height in excess of 230 mm• For mounting on finished floors• Requires Monolith feet if installing onto a low weight bearing or dry
wall installation (131.104.00.1) - see page 37• For installation as part of renovation work, design or new build• Not suitable for Geberit AquaClean - see page 91• metal bracketry for supporting ceramics is not suitable
Characteristics
• Sanitary module with front cladding made of toughened safety glass (ESG) and lateral cladding made of brushed aluminium
• Includes a Duofix frame PreWall mounted• Self-supporting• Compensation of dimensional tolerances• Height compensation up to 20 mm• Dual flush• Adjustable flushing volume• Fully insulated against condensation• Water supply connection at the bottom left or right• Front panel made of 8 mm glass• Side base pods can be adjusted to skirting board • Ceramics fastening M12, fastening distance holes for both 18 cm and
23 cm
Product Details
Additional NoteWater supply connection set with 2 angle stop valves R 1/2 ; Flush pipe 230 x 230 mm, ø 50 / 44 mm; WC outlet pipe, HDPE, ø 90 mm; Adaptor sleeve, HDPE, ø 90/110 mm; 2 threaded rods M12 for ceramics fastening; Fastening material for solid wall; Acoustic insulation set; Fastening material for wall-hung WC
Ordering Information
* available Qtr 3 2012
The Geberit Monolith range is only available to displaying retailers. Please contact your local area sales manager for further information
Product material Stainless steel
Nominal voltage 230 V AC
Operating voltage 4.1 V DC
Article no. Colour PU1
115.857.00.1 stainless steel 1
115.857.21.1 gloss chrome 1
Protection degree IP 20
Mains frequency 50–60 Hz
Nominal voltage 85–240 V AC
Article no. PU1 PU2
115.861.00.1 1 10
Article no. PU1
242.658.00.1 1
43
33
0 - 30
77
77
Monolith sanitary modules
Flow pressure range 0.1–10 bar
Operating temperature water max. 25 °C
Flush volume factory setting 6 and 3 l
Flush volume large range 4.5 / 6 l
Article no. New product Colour PU1 PU4
131.021.SI.1 white glass / aluminium 1 6
131.021.SJ.1 black glass / aluminium 1 6
131.021.SQ.1 NEW umbra glass / aluminium * 1 6
131.021.SL.1 NEW mint glass / aluminium 1 6
0
908
485
R½
101
18/23
25
47 413 4 13 4
106
43
0
Product GuideMonolith sanitary modules
Product and Installation Guide Washroom & Bathroom 2012 29
Geberit Monolith sanitary module for floor-standing WC, H101, with P-Bend
Application
• For close coupled WC with 150 mm floor drainage outlet (for further drainage outlet options please see accessories on page 70)
• For use in floor outlet connections• For use in wall outlet connections, outlet height 180 mm (requires
131.083.16.1)• For mounting on finished floors• For installation as part of renovation work, design or new build• metal bracketry for supporting ceramics is not suitable
Characteristics
• Sanitary module with front cladding made of toughened safety glass (ESG) and lateral cladding made of brushed aluminium
• Includes a Duofix frame PreWall mounted• Self-supporting• Compensation of dimensional tolerances• Height compensation up to 20 mm• Integrated dual flush• Adjustable flushing volume• Fully insulated against condensation• Water supply connection at the bottom left or right• Front panel made of 8 mm glass• Side base pods can be adjusted to skirting board
Product Details
Additional NoteWater supply connection set with 2 angle stop valves R 1/2 ; Flush pipe 230 x 230 mm, ø 50 / 44 mm; P-bend, PP, ø 90 mm ; Adaptor sleeve, HDPE, ø 90/110 mm; Rubber seal EPDM; Fastening material for solid wall
Ordering Information
* available Qtr 3 2012
Geberit Monolith sanitary module for wall-hung WC, H114, with outlet pipe connection New
Application
• For wall mounted WC with 240 - 260 mm wall drainage outlet (for further drainage outlet options please see accessories on page 70)
• For use in wall outlet connections, outlet height in excess of 230 mm• For mounting on finished floors• Requires Monolith feet if installing onto a low weight bearing or dry
wall installation (131.104.00.1) - see page 37• For installation as part or renovation work, design or new build• Not suitable for Geberit AquaClean - see page 91• metal bracketry for supporting ceramics is not suitable
Characteristics
• Module height 114 cm• Sanitary module with front cladding made of toughened safety glass
(ESG) and lateral cladding made of brushed aluminium • Self-supporting• Compensation of dimensional tolerances• Height compensation up to 20 mm• Dual flush• Adjustable flushing volume• Fully insulated against condensation• Water connection at the rear centre• Ceramics fastening M12, fastening distance 18 cm
Product Details
Additional NoteWater supply connection set with angle stop valve; WC outlet pipe, HDPE, ø 90 mm; Adaptor sleeve, HDPE, ø 90/110 mm; Flush pipe 230 x 230 mm, ø 50 / 44 mm; 2 threaded rods M12 for ceramics fastening; Acoustic insulation set; Fastening material
Ordering Information
available Qtr 3 2012
The Geberit Monolith range is only available to displaying retailers. Please contact your local area sales manager for further information
Flow pressure range 0.1–10 bar
Operating temperature water max. 25 °C
Flush volume factory setting 6 and 3 l
Flush volume large range 4.5 / 6 l
Article no. New product
Colour PU1 PU4
131.002.SI.1 white glass / aluminium 1 6
131.002.SJ.1 black glass / aluminium 1 6
131.002.SQ.1 *NEW umbra glass / aluminium 1 6
131.002.SL.1 NEW mint glass / aluminium 1 6
0
908
485R½
1010
180 10
10
106
0
Height x Width x Depth 114.5 x 50.5 x 10.6 cm
Flow pressure range 0.1–10 bar
Operating temperature water max. 25 °C
Flush volume factory setting 6 and 3 l
Flush volume large range 4.5 / 6 l
Article no. Colour PU1
131.031.SI.1 white glass / aluminium 1
131.031.SJ.1 black glass / aluminium 1
131.031.SQ.1 umbra glass / aluminium 1
0
505
1145
25
R½
18
30
92−102
104
106
43
0
109
30 Product and Installation Guide Washroom & Bathroom 2012
Product GuideMonolith sanitary modules
Geberit Monolith sanitary module for wall-hung washbasin and wall-mounted tap and mixer right, drawer left New
Application• For wall-hung washbasins• For mounting on finished floors• For use in wall inlet connections• For installation in renovations, conversions and new buildings• Two holes for wall-mounted washbasin taps with center distance 10
cm and mixer to the right• For concealed wall-mounted taps from Dornbracht, Hansa,
Hansgrohe, KWC and Villeroy & Boch• other manufacturers may be compatible• For wall-hung basins maximum width of 70 cm• metal bracketry for supporting ceramics is not suitable
Characteristics• Self-supporting• Compensation of dimensional tolerances• Wall inlet connection height: 45–60 cm from finished floor• Water supply connection height: 50–65 cm from finished floor • Distance from element centre to angle stop valve 4–8 cm• Trap, hidden• Washbasin installation height: 82 cm from finished floor• Washbasin fastening distance 18–32 cm, enlargeable to 45 cm• Wall-mounted tap height: 104 cm from finished floor• Connection to integrated water supply• Siphon with integrated adjustable inlet• Height-adjustable drain cover• Integrated mounting rail for wash basin• Galvanized leg supports, adjustable, premounted• Sanitary module with front cladding made of toughened safety glass
(ESG) and lateral cladding made of brushed aluminium • Side pull-out drawer with mechanical opening support
Product Details
Additional NoteWashbasin element with front and side cladding; Fastening material for solid wall; Extension left with telescopic slide; Mounting plate for mixer; Water connection kit with two hoses, tanks, 2 connection angles 90° Rp 1/2 and G 3/8 and 2 angle valves R 1/2; Washbasin trapwith Drain pipe and the nut 1 1/4; 2 outleet Pipes (ø 32 mm and ø 40 mm); Gasket; Cover to mounting railOrdering Information
available Qtr 3 2012
Geberit Monolith sanitary module for wall-hung washbasin and wall-mounted tap and mixer right, drawer right New
Application• For wall-hung washbasins• For mounting on finished floors• For use in wall inlet connections• For installation in renovations, conversions and new buildings• Two holes for wall-mounted washbasin taps with center distance 10
cm and mixer to the right• For concealed wall-mounted taps from Dornbracht, Hansa,
Hansgrohe, KWC and Villeroy & Boch• other manufacturers may be compatible• For wall-hung basins maximum width of 70 cm• metal bracketry for supporting ceramics is not suitableCharacteristics• Self-supporting• Compensation of dimensional tolerances• Wall inlet connection height: 45–60 cm from finished floor• Water supply connection height: 50–65 cm from finished floor • Distance from element centre to angle stop valve 4–8 cm• Trap, hidden• Washbasin installation height: 82 cm from finished floor• Washbasin fastening distance 18–32 cm, enlargeable to 45 cm• Wall-mounted tap height: 104 cm from finished floor• Connection to integrated water supply• Siphon with integrated adjustable inlet• Height-adjustable drain cover• Integrated mounting rail for wash basin• Galvanized leg supports, adjustable, premounted• Sanitary module with front cladding made of toughened safety glass
(ESG) and lateral cladding made of brushed aluminium • Side pull-out drawer with mechanical opening supportProduct Details
Additional NoteWashbasin element with front and side cladding; Fastening material for solid wall; Extension right with telescopic slide; Mounting plate for mixer; Water connection kit with two hoses, tanks, 2 connection angles 90° Rp 1/2 and G 3/8 and 2 angle valves R 1/2; Washbasin trapwith Drain pipe and the nut 1 1/4; 2 outleet Pipes (ø 32 mm and ø 40 mm); Gasket; Cover to mounting railOrdering Information
available Qtr 3 2012
The Geberit Monolith range is only available to displaying retailers. Please contact your local area sales manager for further information
Operating pressure 1–10 bar
Maximum operating temperature 80 °C
Maximum operating temperature, short-term 90 °C
Height x Width x Depth 114.5 x 73.2 x 10.7 cm
Article no. Colour PU1
131.040.SI.1 white glass / aluminium 1
131.040.SJ.1 black glass / aluminium 1
131.040.SQ.1 umbra glass / aluminium 1
815
732
1041145
18−45
8−16
0−2310
≥ 30
R½45−60
545−685
0
39
85−235
50−65R½
87
107
60
30
55
64
Operating pressure 1–10 bar
Maximum operating temperature 80 °C
Maximum operating temperature, short-term 90 °C
Height x Width x Depth 114.5 x 73.2 x 10.7 cm
Article no. Colour PU1
131.041.SI.1 white glass / aluminium 1
131.041.SJ.1 black glass / aluminium 1
131.041.SQ.1 umbra glass / aluminium 1
815
732
1041145
18−45
8−16
0−2310
≥ 30
R½45−60
545−685
0
39
85−235
50−65R½
87
107
60
30
55
64
Product GuideMonolith sanitary modules
Product and Installation Guide Washroom & Bathroom 2012 31
Geberit Monolith sanitary module for washbasins with wall-mounted tap, extension left and right
New
Application
• For wall-hung washbasins• For mounting on finished floors• For use in wall inlet connections• For installation in renovations, conversions and new buildings• Two holes for wall-mounted washbasin taps with center distance 10
cm and mixer to the right• For concealed wall-mounted taps from Dornbracht, Hansa,
Hansgrohe, KWC and Villeroy & Boch• other manufacturers may be compatible• For wall-hung basins maximum width of 70 cm• metal bracketry for supporting ceramics is not suitable
Characteristics
• Self-supporting• Compensation of dimensional tolerances• Wall inlet connection height: 45–60 cm from finished floor• Water supply connection height: 50–65 cm from finished floor • Distance from element centre to angle stop valve 4–8 cm• Trap, hidden• Washbasin installation height: 82 cm from finished floor• Washbasin fastening distance 18–32 cm, enlargeable to 45 cm• Wall-mounted tap height: 104 cm from finished floor• Connection to integrated water supply• Siphon with integrated adjustable inlet• Height-adjustable drain cover• Integrated mounting rail for wash basin• Galvanized leg supports, adjustable, premounted• Sanitary module with front cladding made of toughened safety glass
(ESG) and lateral cladding made of brushed aluminium • Side pull-out drawer with mechanical opening support
Product Details
Additional NoteWashbasin element with front and side cladding; Fastening material for solid wall; Mounting plate for mixer; Water connection kit with two hoses, tanks, 2 connection angles 90° Rp 1/2 and G 3/8 and 2 angle valves R 1/2; 2 Extensions (left and right) with telescopic slide; Washbasin trapwith Drain pipe and the nut 1 1/4; 2 outleet Pipes (ø 32 mm and ø 40 mm); Gasket; Cover to mounting rail
Ordering Information
available Qtr 3 2012
Geberit Monolith sanitary module for wall-hung washbasin and wall-mounted tap and mixer right, without drawer New
Application
• For wall-hung washbasins• For mounting on finished floors• For use in wall inlet connections• For installation in renovations, conversions and new buildings• Two holes for wall-mounted washbasin taps with center distance 10
cm and mixer to the right• For concealed wall-mounted taps from Dornbracht, Hansa,
Hansgrohe, KWC and Villeroy & Boch• other manufacturers may be compatible• For wall-hung basins maximum width of 70 cm• metal bracketry for supporting ceramics is not suitableCharacteristics• Self-supporting• Compensation of dimensional tolerances• Wall inlet connection height: 45–60 cm from finished floor• Water supply connection height: 50–65 cm from finished floor • Distance from element centre to angle stop valve 4–8 cm• Trap, hidden• Washbasin installation height: 82 cm from finished floor• Washbasin fastening distance 18–32 cm, enlargeable to 45 cm• Wall-mounted tap height: 104 cm from finished floor• Connection to integrated water supply• Siphon with integrated adjustable inlet• Height-adjustable drain cover• Integrated mounting rail for wash basin• Galvanized leg supports, adjustable, premounted• Sanitary module with front cladding made of toughened safety glass
(ESG) and lateral cladding made of brushed aluminium Product Details
Additional NoteWashbasin element with front and side cladding; Fastening material for solid wall; Mounting plate for mixer; Water connection kit with two hoses, tanks, 2 connection angles 90° Rp 1/2 and G 3/8 and 2 angle valves R 1/2; Washbasin trapwith Drain pipe and the nut 1 1/4; 2 outleet Pipes (ø 32 mm and ø 40 mm); Gasket; Cover to mounting railOrdering Information
available Qtr 3 2012
The Geberit Monolith range is only available to displaying retailers. Please contact your local area sales manager for further information
Operating pressure 1–10 bar
Maximum operating temperature 80 °C
Maximum operating temperature, short-term 90 °C
Height x Width x Depth 114.5 x 73.2 x 10.7 cm
Article no. Colour PU1
131.042.SI.1 white glass / aluminium 1
131.042.SJ.1 black glass / aluminium 1
131.042.SQ.1 umbra glass / aluminium 1
815
732
1041145
18−45
8−16
0−2310
≥ 30
R½45−60
545−685
0
39
85−235
50−65R½
87
107
60
30
55
64
Operating pressure 1–10 bar
Maximum operating temperature 80 °C
Maximum operating temperature, short-term 90 °C
Höhe x Breite x Tiefe 114,5 x 73,2 x 10,7 cm
Article no. Colour PU1
131.043.SI.1 white glass / aluminium 1
131.043.SJ.1 black glass / aluminium 1
131.043.SQ.1 umbra glass / aluminium 1
815
732
1041145
18−45
8−16
10
R½45−60
545−685
0
39
85−235
50−65R½
87
107
60
30
55
64
32 Product and Installation Guide Washroom & Bathroom 2012
Product GuideMonolith sanitary modules
Geberit Monolith sanitary module for wall-hung washbasin and wall-mounted tap and mixer left, drawer left New
Application
• For wall-hung washbasins• For mounting on finished floors• For use in wall inlet connections• For installation in renovations, conversions and new buildings• For use with wall-mounted taps from Vola, with mixer on the left• other manufacturers may be compatible• For wall-hung basins maximum width of 70 cm• metal bracketry for supporting ceramics is not suitable
Characteristics
• Self-supporting• Compensation of dimensional tolerances• Wall inlet connection height: 45–60 cm from finished floor• Water supply connection height: 50–65 cm from finished floor • Distance from element centre to angle stop valve 4–8 cm• Trap, hidden• Washbasin installation height: 82 cm from finished floor• Washbasin fastening distance 18–32 cm, enlargeable to 45 cm• Wall-mounted tap height: 104 cm from finished floor• Connection to integrated water supply• Siphon with integrated adjustable inlet• Height-adjustable drain cover• Integrated mounting rail for wash basin• Galvanized leg supports, adjustable, premounted• Sanitary module with front cladding made of toughened safety glass
(ESG) and lateral cladding made of brushed aluminium • Side pull-out drawer with mechanical opening support
Product Details
Additional NoteWashbasin element with front and side cladding; Fastening material for solid wall; Extension left with telescopic slide; Mounting plate for mixer; Water connection kit with two hoses, tanks, 2 connection angles 90° Rp 1/2 and G 3/8 and 2 angle valves R 1/2; Washbasin trapwith Drain pipe and the nut 1 1/4; 2 outleet Pipes (ø 32 mm and ø 40 mm); Gasket; Cover to mounting rail
Ordering Information
available Qtr 3 2012
Geberit Monolith sanitary module for wall-hung washbasin and wall-mounted tap with mixer left, drawer right New
Application
• For wall-hung washbasins• For mounting on finished floors• For use in wall inlet connections• For installation in renovations, conversions and new buildings• For use with wall-mounted taps from Vola, with mixer on the left• other manufacturers may be compatible• For wall-hung basins maximum width of 70 cm• metal bracketry for supporting ceramics is not suitableCharacteristics• Self-supporting• Compensation of dimensional tolerances• Wall inlet connection height: 45–60 cm from finished floor• Water supply connection height: 50–65 cm from finished floor • Distance from element centre to angle stop valve 4–8 cm• Trap, hidden• Washbasin installation height: 82 cm from finished floor• Washbasin fastening distance 18–32 cm, enlargeable to 45 cm• Wall-mounted tap height: 104 cm from finished floor• Connection to integrated water supply• Siphon with integrated adjustable inlet• Height-adjustable drain cover• Integrated mounting rail for wash basin• Galvanized leg supports, adjustable, premounted• Sanitary module with front cladding made of toughened safety glass
(ESG) and lateral cladding made of brushed aluminium • Side pull-out drawer with mechanical opening supportProduct Details
Additional NoteWashbasin element with front and side cladding; Fastening material for solid wall; Extension right with telescopic slide; Mounting plate for mixer; Water connection kit with two hoses, tanks, 2 connection angles 90° Rp 1/2 and G 3/8 and 2 angle valves R 1/2; Washbasin trapwith Drain pipe and the nut 1 1/4; 2 outleet Pipes (ø 32 mm and ø 40 mm); Gasket; Cover to mounting railOrdering Information
available Qtr 3 2012
The Geberit Monolith range is only available to displaying retailers. Please contact your local area sales manager for further information
Operating pressure 1–10 bar
Maximum operating temperature 80 °C
Maximum operating temperature, short-term 90 °C
Height x Width x Depth 114.5 x 73.2 x 10.7 cm
Article no. Colour PU1
131.044.SI.1 white glass / aluminium 1
131.044.SJ.1 black glass / aluminium 1
131.044.SQ.1 umbra glass / aluminium 1
815
732
1041145
18−45
8−16
0−238
≥ 30
R½
45−60545−685
0
39
85−235
50−65R½
87
107
60
30
55
64
Operating pressure 1–10 bar
Maximum operating temperature 80 °C
Maximum operating temperature, short-term 90 °C
Height x Width x Depth 114.5 x 73.2 x 10.7 cm
Article no. Colour PU1
131.045.SI.1 white glass / aluminium 1
131.045.SJ.1 black glass / aluminium 1
131.045.SQ.1 umbra glass / aluminium 1
815
732
1041145
18−45
8−16
0−23
≥ 30
8
R½
45−60545−685
0
39
85−235
50−65R½
87
107
60
30
55
64
Product GuideMonolith sanitary modules
Product and Installation Guide Washroom & Bathroom 2012 33
Geberit Monolith sanitary module for wall-hung washbasin and wall-mounted tap with mixer left, drawer left and right New
Application
• For wall-hung washbasins• For mounting on finished floors• For use in wall inlet connections• For installation in renovations, conversions and new buildings• For use with wall-mounted taps from Vola, with mixer on the left• other manufacturers may be compatible• For wall-hung basins maximum width of 70 cm• metal bracketry for supporting ceramics is not suitable
Characteristics
• Self-supporting• Compensation of dimensional tolerances• Wall inlet connection height: 45–60 cm from finished floor• Water supply connection height: 50–65 cm from finished floor • Distance from element centre to angle stop valve 4–8 cm• Trap, hidden• Washbasin installation height: 82 cm from finished floor• Washbasin fastening distance 18–32 cm, enlargeable to 45 cm• Wall-mounted tap height: 104 cm from finished floor• Connection to integrated water supply• Siphon with integrated adjustable inlet• Height-adjustable drain cover• Integrated mounting rail for wash basin• Galvanized leg supports, adjustable, premounted• Sanitary module with front cladding made of toughened safety glass
(ESG) and lateral cladding made of brushed aluminium • Side pull-out drawer with mechanical opening support
Product Details
Additional NoteWashbasin element with front and side cladding; Fastening material for solid wall; 2 Extensions (left and right) with telescopic slide; Mounting plate for mixer; Water connection kit with two hoses, tanks, 2 connection angles 90° Rp 1/2 and G 3/8 and 2 angle valves R 1/2; Washbasin trapwith Drain pipe and the nut 1 1/4; 2 outleet Pipes (ø 32 mm and ø 40 mm); Gasket; Cover to mounting rail
Ordering Information
available Qtr 3 2012
Geberit Monolith sanitary module for wall-hung washbasins and wall-mounted tap with mixer left, without drawer New
Application
• For wall-hung washbasins• For mounting on finished floors• For use in wall inlet connections• For installation in renovations, conversions and new buildings• For use with wall-mounted taps from Vola, with mixer on the left• other manufacturers may be compatible• For wall-hung basins maximum width of 70 cm• metal bracketry for supporting ceramics is not suitable
Characteristics
• Self-supporting• Compensation of dimensional tolerances• Wall inlet connection height: 45–60 cm from finished floor• Water supply connection height: 50–65 cm from finished floor • Distance from element centre to angle stop valve 4–8 cm• Trap, hidden• Washbasin installation height: 82 cm from finished floor• Washbasin fastening distance 18–32 cm, enlargeable to 45 cm• Wall-mounted tap height: 104 cm from finished floor• Connection to integrated water supply• Siphon with integrated adjustable inlet• Ablaufabdeckung stufenlos höhenverstellbar• Integrated mounting rail for wash basin• Galvanized leg supports, adjustable, premounted• Sanitary module with front cladding made of toughened safety glass
(ESG) and lateral cladding made of brushed aluminium Product Details
Additional NoteWashbasin element with front and side cladding; Fastening material for solid wall; Mounting plate for mixer; Water connection kit with two hoses, tanks, 2 connection angles 90° Rp 1/2 and G 3/8 and 2 angle valves R 1/2; Washbasin trapwith Drain pipe and the nut 1 1/4; 2 outleet Pipes (ø 32 mm and ø 40 mm); Gasket; Cover to mounting railOrdering Information
available Qtr 3 2012
The Geberit Monolith range is only available to displaying retailers. Please contact your local area sales manager for further information
Operating pressure 1–10 bar
Maximum operating temperature 80 °C
Maximum operating temperature, short-term 90 °C
Height x Width x Depth 114.5 x 73.2 x 10.7 cm
Article no. Colour PU1
131.046.SI.1 white glass / aluminium 1
131.046.SJ.1 black glass / aluminium 1
131.046.SQ.1 umbra glass / aluminium 1
815
732
1041145
18−45
8−16
0−238
≥ 30
R½45−60
545−685
0
39
85−235
50−65R½
87
107
60
30
55
64
Operating pressure 1–10 bar
Maximum operating temperature 80 °C
Maximum operating temperature, short-term 90 °C
Height x Width x Depth 114.5 x 73.2 x 10.7 cm
Article no. Colour PU1
131.047.SI.1 white glass / aluminium 1
131.047.SJ.1 black glass / aluminium 1
131.047.SQ.1 umbra glass / aluminium 1
815
732
1041145
18−45
8−16
8
R½45−60
545−685
0
39
85−235
50−65R½
87
107
60
30
55
64
34 Product and Installation Guide Washroom & Bathroom 2012
Product GuideMonolith sanitary modules
Geberit Monolith sanitary module for wall-hung washbasin and deck-mounted tap, drawer left New
Application
• For wall-hung washbasins• For mounting on finished floors• For use in wall inlet connections• For installation in renovations, conversions and new buildings• For use with deck-mounted taps• For wall-hung basins maximum width of 70 cm• metal bracketry for supporting ceramics is not suitable
Characteristics
• Self-supporting• Compensation of dimensional tolerances• Wall inlet connection height: 45–60 cm from finished floor• Water supply connection height: 50–65 cm from finished floor • Distance from element centre to angle stop valve 4–8 cm• Trap, hidden• Washbasin installation height: 82 cm from finished floor• Washbasin fastening distance 18–32 cm, enlargeable to 45 cm• Anschluss an die Trinkwasserversorgung integriert• Siphon with integrated adjustable inlet• Height-adjustable drain cover• Integrated mounting rail for wash basin• Galvanized leg supports, adjustable, premounted• Sanitary module with front cladding made of toughened safety glass
(ESG) and lateral cladding made of brushed aluminium • Side pull-out drawer with mechanical opening support
Product Details
Additional NoteWashbasin element with front and side cladding; Fastening material for solid wall; Extension left with telescopic slide; 2 angle stop valves R 1/2"; Washbasin trapwith Drain pipe and the nut 1 1/4; 2 outleet Pipes (ø 32 mm and ø 40 mm); Gasket; Cover to mounting rail; Extension for valve
Ordering Information
available Qtr 3 2012
Geberit Monolith sanitary module for wall-hung washbasin and deck-mounted tap, drawer right New
Application
• For wall-hung washbasins• For mounting on finished floors• For use in wall inlet connections• For installation in renovations, conversions and new buildings• For use with deck-mounted taps• For wall-hung basins maximum width of 70 cm• metal bracketry for supporting ceramics is not suitable
Characteristics
• Self-supporting• Compensation of dimensional tolerances• Wall inlet connection height: 45–60 cm from finished floor• Water supply connection height: 50–65 cm from finished floor • Distance from element centre to angle stop valve 4–8 cm• Trap, hidden• Washbasin installation height: 82 cm from finished floor• Washbasin fastening distance 18–32 cm, enlargeable to 45 cm• Connection to integrated water supply• Siphon with integrated adjustable inlet• Height-adjustable drain cover• Integrated mounting rail for wash basin• Galvanized leg supports, adjustable, premounted• Sanitary module with front cladding made of toughened safety glass
(ESG) and lateral cladding made of brushed aluminium • Side pull-out drawer with mechanical opening support
Product Details
Additional NoteWashbasin element with front and side cladding; Fastening material for solid wall; Extension right with telescopic slide; 2 angle stop valves R 1/2"; Washbasin trapwith Drain pipe and the nut 1 1/4; 2 outleet Pipes (ø 32 mm and ø 40 mm); Gasket; Cover to mounting rail; Extension for valve
Ordering Information
available Qtr 3 2012
The Geberit Monolith range is only available to displaying retailers. Please contact your local area sales manager for further information
Operating pressure 1–10 bar
Maximum operating temperature 80 °C
Maximum operating temperature, short-term 90 °C
Height x Width x Depth 114.5 x 73.2 x 10.7 cm
Article no. Colour PU1
131.048.SI.1 white glass / aluminium 1
131.048.SJ.1 black glass / aluminium 1
131.048.SQ.1 umbra glass / aluminium 1
815
732
1145
18−45
8−16
0−23
≥ 30
R½45−53
545−615
39
85−235
50−65R½
0
87
107
60
30
55
64
Operating pressure 1–10 bar
Maximum operating temperature 80 °C
Maximum operating temperature, short-term 90 °C
Height x Width x Depth 114.5 x 73.2 x 10.7 cm
Article no. Colour PU1
131.049.SI.1 white glass / aluminium 1
131.049.SJ.1 black glass / aluminium 1
131.049.SQ.1 umbra glass / aluminium 1
815
732
1145
18−45
8−16
0−23
≥ 30
R½45−53
545−615
39
85−235
50−65R½
0
87
107
60
30
55
64
Product GuideMonolith sanitary modules
Product and Installation Guide Washroom & Bathroom 2012 35
Geberit Monolith sanitary module for wall-hung washbasin and deck-mounted tap, drawers left and right
Application
• For wall-hung washbasins• For mounting on finished floors• For use in wall inlet connections• For installation in renovations, conversions and new buildings• For use with deck-mounted taps• For wall-hung basins maximum width of 70 cm• metal bracketry for supporting ceramics is not suitable
Characteristics
• Self-supporting• Compensation of dimensional tolerances• Wall inlet connection height: 45–60 cm from finished floor• Water supply connection height: 50–65 cm from finished floor • Distance from element centre to angle stop valve 4–8 cm• Trap, hidden• Washbasin installation height: 82 cm from finished floor• Washbasin fastening distance 18–32 cm, enlargeable to 45 cm• Connection to integrated water supply• Siphon with integrated adjustable inlet• Height-adjustable drain cover• Integrated mounting rail for wash basin• Galvanized leg supports, adjustable, premounted• Sanitary module with front cladding made of toughened safety glass
(ESG) and lateral cladding made of brushed aluminium • Side pull-out drawer with mechanical opening support
Product Details
Additional NoteWashbasin element with front and side cladding; Fastening material for solid wall; 2 Extensions (left and right) with telescopic slide; 2 angle stop valves R 1/2"; Washbasin trapwith Drain pipe and the nut 1 1/4; 2 outleet Pipes (ø 32 mm and ø 40 mm); Gasket; Cover to mounting rail; Extension for valve
Ordering Information
available Qtr 3 2012
Geberit Monolith sanitary module for wall-hung washbasin and deck-mounted tap, without drawer
New
Application
• For wall-hung washbasins• For mounting on finished floors• For use in wall inlet connections• For installation in renovations, conversions and new buildings• For use with deck-mounted taps• For wall-hung basins maximum width of 70 cm• metal bracketry for supporting ceramics is not suitable
Characteristics
• Self-supporting• Compensation of dimensional tolerances• Wall inlet connection height: 45–60 cm from finished floor• Water supply connection height: 50–65 cm from finished floor • Distance from element centre to angle stop valve 4–8 cm• Trap, hidden• Washbasin installation height: 82 cm from finished floor• Washbasin fastening distance 18–32 cm, enlargeable to 45 cm• Connection to integrated water supply• Siphon with integrated adjustable inlet• Height-adjustable drain cover• Galvanized leg supports, adjustable, premounted• Sanitary module with front cladding made of toughened safety glass
(ESG) and lateral cladding made of brushed aluminium
Product Details
Additional NoteWashbasin element with front and side cladding; Fastening material for solid wall; 2 angle stop valves R 1/2"; Washbasin trapwith Drain pipe and the nut 1 1/4; 2 outleet Pipes (ø 32 mm and ø 40 mm); Gasket; Cover to mounting rail; Extension for valve
Ordering Information
available Qtr 3 2012
The Geberit Monolith range is only available to displaying retailers. Please contact your local area sales manager for further information
Operating pressure 1–10 bar
Maximum operating temperature 80 °C
Maximum operating temperature, short-term 90 °C
Height x Width x Depth 114.5 x 73.2 x 10.7 cm
Article no. Colour PU1
131.050.SI.1 white glass / aluminium 1
131.050.SJ.1 black glass / aluminium 1
131.050.SQ.1 umbra glass / aluminium 1
815
732
1145
18−45
8−16
0−23
≥ 30
R½45−53
545−615
39
85−235
50−65R½
0
87
107
60
30
55
64
Operating pressure 1–10 bar
Maximum operating temperature 80 °C
Maximum operating temperature, short-term 90 °C
Height x Width x Depth 114.5 x 73.2 x 10.7 cm
Article no. Colour PU1
131.051.SI.1 white glass / aluminium 1
131.051.SJ.1 black glass / aluminium 1
131.051.SQ.1 umbra glass / aluminium 1
815
732
1145
18−45
8−16
R½
45−53545−615
39
85−235
50−65R½
0
87
107
60
30
55
64
36 Product and Installation Guide Washroom & Bathroom 2012
Product GuideMonolith sanitary modules
Geberit Monolith sanitary module for Geberit AquaClean, H114, with outlet pipe connection New
Application
• For wall mounted WC with 240 - 260 mm wall drainage outlet (for further drainage outlet options please see accessories on page 70)
• For use in wall outlet connections, outlet height in excess of 230 mm• For mounting on finished floors• For replacing close coupled WC with exposed cistern to wall-hung
WC• Requires Monolith feet if installing onto a low weight bearing or dry
wall installation (131.104.00.1) - see page 37• For installation as part or renovation work, design or new build• For connecting Geberit AquaClean• metal bracketry for supporting ceramics is not suitable
Characteristics
• Module height 114 cm• Sanitary module with front cladding made of toughened safety glass
(ESG) and lateral cladding made of brushed aluminium • Self-supporting• Compensation of dimensional tolerances• Height compensation up to 20 mm• Dual flush• Adjustable flushing volume• Fully insulated against condensation• Side connection on left or right• Water supply connection at the bottom left or right• Water connection at the rear centre• Ceramics fastening M12, fastening distance 18 cm
Product Details
Additional NoteWater supply connection set with angle stop valve; WC outlet pipe, HDPE, ø 90 mm; Adaptor sleeve, HDPE, ø 90/110 mm; Flush pipe 230 x 230 mm, ø 50 / 44 mm; 2 threaded rods M12 for ceramics fastening; Acoustic insulation set; Fastening material
Ordering Information
available Qtr 3 2012
Geberit Monolith sanitary module for floor-standing WC, H114, with P-Bend New
Application
• For close coupled WC with 150 mm floor drainage outlet (for further drainage outlet options please see accessories on page 70)
• For use in floor outlet connections• For use in wall outlet connections, outlet height 180 mm (requires
131.083.16.1)• For replacing floor-standing WC with close-coupled cistern• For mounting on finished floors• For installation as part or renovation work, design or new build• metal bracketry for supporting ceramics is not suitable
Characteristics
• Module height 114 cm• Includes a Duofix frame PreWall mounted• Sanitary module with front cladding made of toughened safety glass
(ESG) and lateral cladding made of brushed aluminium • Self-supporting• Compensation of dimensional tolerances• Height compensation up to 20 mm• Dual flush• Adjustable flushing volume• Fully insulated against condensation• Water connection at the rear centre
Product Details
Additional NoteWater supply connection set with angle stop valve; Flush pipe 230 x 230 mm, ø 50 / 44 mm; P-bend, PP, ø 90 mm ; Adaptor sleeve, HDPE, ø 90/110 mm; Rubber seal EPDM; Fastening material
Ordering Information
available Qtr 3 2012
The Geberit Monolith range is only available to displaying retailers. Please contact your local area sales manager for further information
Height x Width x Depth 114.5 x 50.5 x 10.6 cm
Flow pressure range 0.1–10 bar
Operating temperature water max. 25 °C
Flush volume factory setting 6 and 3 l
Flush volume large range 4.5 / 6 l
Article no. Colour PU1
131.032.SI.1 white glass / aluminium 1
131.032.SJ.1 black glass / aluminium 1
131.032.SQ.1 umbra glass / aluminium 1
0
505
R½
18
30
25
15
28
92−102
104
1145
106
455
25
0
109
Height x Width x Depth 114.5 x 50.5 x 10.6 cm
Flow pressure range 0.1–10 bar
Operating temperature water max. 25 °C
Flush volume factory setting 6 and 3 l
Flush volume large range 4.5 / 6 l
Article no. Colour PU1
131.033.SI.1 white glass / aluminium 1
131.033.SJ.1 black glass / aluminium 1
131.033.SQ.1 umbra glass / aluminium 1
0
505
18
92−102
104
R½
30
1145
106
0
109
Product GuideMonolith sanitary modules
Product and Installation Guide Washroom & Bathroom 2012 37
Geberit Monolith sanitary module for bidet, H101New
Application
• For replacing wall-hung bidet• For mounting on finished floors• For installation in renovations, conversions and new buildings• For use in wall inlet connections• For installing pedestal and wall-hung bidets• metal bracketry for supporting ceramics is not suitable
Characteristics
• Sanitary module with front cladding made of toughened safety glass (ESG) and lateral cladding made of brushed aluminium
• Self-supporting• Compensation of dimensional tolerances• Height compensation up to 20 mm• Water supply connection at the bottom left or right• Wall inlet connection height: 8–21 cm from finished floor• Fastening distance of bidet 18 cm
Product Details
Additional NoteElement for bidet with front and side cladding; Fastening material for solid wall; Water supply connection set; 2 feet
Ordering Information
available Qtr 3 2012
The Geberit Monolith range is only available to displaying retailers. Please contact your local area sales manager for further information
Double towel rail for Geberit Monolith sanitary module for washbasin, length 31 cm New
Characteristics
• Emco towel rail, series Emco Loft• Chrome-plated• Length 31 cm
Ordering Information
available Qtr 3 2012
Double towel for Geberit Monolith sanitary module for washbasin, length 41 cm New
Characteristics
• Emco towel rail, series Emco Loft• Chrome-plated• Length 41 cm
Ordering Information
available Qtr 3 2012
Set of fixing brackets for drywall for Geberit Monolith sanitary module for washbasin New
Application
• For Geberit Monolith washbasin unit
Additional Note2 fastening brackets; Fastening material
Ordering Information
available Qtr 3 2012
Set of Geberit Monolith feet
Application
• For supporting Geberit wall-hung Monolith sanitary modules on drywall construction and low load bearing walls
Ordering Information
Height x Width x Depth 101 x 48,5 x 10,6 cm
Article no. Colour PU1
131.030.SI.1 white glass / aluminium 1
131.030.SJ.1 black glass / aluminium 1
131.030.SQ.1 umbra glass / aluminium 1
Article no. Colour PU1
131.109.21.1 gloss chrome 1
0
485
10118
106
0
Article no. Colour PU1
131.110.21.1 gloss chrome 1
Article no. PU1
131.099.00.1 1
Article no. PU1
131.104.00.1 1
38 Product and Installation Guide Washroom & Bathroom 2012
Product GuideMonolith sanitary modules
Support bracket set for WC ceramic appliance, Geberit Monolith sanitary module
Application
• For additional support of WC pans with contact surfaces (x) smaller than 170 mm
• For use with Geberit Duofix WC frames
Ordering Information
Geberit water supply bottom connection set, 3/8" and 1/2"
Application
• For use in bottom connections
Ordering Information
Monolith S-bend for wall-hung WC, 90/110
Application
• For connecting wall-hung WC to floor outlet 15 - 30 cm from wall
Additional NoteS-bend, PVC; WC outlet bend, HDPE, ø 90 mm
Ordering Information
Set of Geberit Monolith outlet pipe for floor-standing WC
Application
• For connecting floor-standing WC to wall outlet 18 cm from wall
Additional NoteWC outlet pipe, HDPE, ø 90 mm; Adaptor sleeve, HDPE, ø 90/110 mm
Ordering Information
Set of Geberit Monolith outlet bend for floor-standing WC
Application
• For connecting floor-standing WC to floor outlet 7 - 15 cm from wall
Additional NoteWC outlet bend, HDPE, ø 90 mm; Adaptor sleeve, HDPE, ø 90/110 mm; Rubber seal EPDM; Fastening material
Ordering Information
Geberit Monolith offset outlet pipe for wall-hung WC
Application
• For connecting wall-hung WC to wall outlet 17 - 19 cm
Additional NoteStraight connector for WC, 7 cm offset, PP, 90 mm; 2 sealing collars
Ordering Information
Geberit Monolith offset outlet pipe for wall-hung WC
Application
• For connecting wall-hung WC to wall outlet 21-23 cm
Additional NoteWC outlet pipe, 3 cm offset, HDPE, ø 90 mm
Ordering Information
Article no.
131.105.00.1
Article no. PU1
131.074.00.1 1
Article no. Colour PU1
131.088.29.1 grey 1
X
Article no. Colour PU1
131.083.16.1 black 1
Article no. Colour PU1
131.082.16.1 black 1
Article no. Colour PU1
131.108.11.1 white alpine 1
Article no. Colour PU1
131.085.11.1 white alpine 1
Product GuideDuofix basin frames
Product and Installation Guide Washroom & Bathroom 2012 39
Duofix basin frames
Geberit Duofix frame for washbasin, H112
Application
• For installation of a wall-hung washbasin with bolt fixings set at between 50 and 380 mm centres (with accessories 111.868.00.1 fastening distance can extend from 380 - 580 mm)
• For installation in a room-high Duofix system wall• For installation in a load bearing stud wall• For a screed of 0 - 200 mm
Characteristics
• Frame height 1120 mm• Frame with holes ø 9 mm for fastening in wood frame construction• Washbasin fastening distance 50 - 380 mm• Galvanised leg supports, steplessly adjustable 0 - 200 mm• Self-supporting• Frame with C profile 40/40 mm• Powder-coated frame, ultramarine blue• Feet can be retracted 5 cm• Rotating foot plate, for installation in UW50 and UW75 profiles• Tap connection plate with adjustable height and depth• Fastening for outlet bend, adjustable height• With wall brackets to allow up to a 200 mm duct. For larger ducts up
to 400 mm use extension bolts 111.887.00.1• With backplate elbows and chrome isolating valves with 3/8" BSP
connection
Additional Note2 water connections R 1/2"; 2 angle stop valves R 1/2"; 2 Duofix PreWall brackets for system; 2 threaded rods M10 for ceramics fastening; Fastening material
Ordering Information
Geberit Duofix frame for washbasin, H98/82
Application
• For installation in a partial-height Duofix system wall in front of a solid or drywall construction
• For installation of a wall-hung washbasin with bolt fixings set at between 50 and 380 mm centres (with accessories 111.868.00.1 fastening distance can extend from 38 - 58 cm)
• For a screed of 0 - 200 mm
Characteristics
• Frame height 820 / 980 mm• Frame with holes ø 9 mm for fastening in wood frame construction• Washbasin fastening distance 50 - 380 mm• Galvanised leg supports, steplessly adjustable 0 - 200 mm• Self-supporting• Frame with C profile 40/40 mm• Powder-coated frame, ultramarine blue• Feet can be retracted 5 cm• Rotating foot plate, for installation in UW50 and UW75 profiles• Tap connection plate with adjustable height and depth• Fastening for outlet bend, adjustable height• With wall brackets to allow up to a 200 mm duct. For larger ducts up
to 400 mm use extension bolts 111.887.00.1• With backplate elbows and chrome isolating valves with 3/8" BSP
connection
Additional Note2 water connections R 1/2"; 2 angle stop valves R 1/2"; 2 Duofix PreWall brackets for system; 2 threaded rods M10 for ceramics fastening; Fastening material
Ordering Information
Duofix basin frames
Article no. PU1
111.495.00.1 1
80
52
112
76
50
100
0-20
0
5-38
73
306
153
7
48
85
0
6
Article no. PU1
111.494.00.1 1
52
80
98(82)
76
50
0-20
0
5-38
73
306
153
7
48
6
85
0
40 Product and Installation Guide Washroom & Bathroom 2012
Product GuideTaps
Geberit Duofix frame for washbasin, H112–130, for wall-mounted tap
Application
• For installation of a wall-hung washbasin with bolt fixings set at between 50 and 380 mm centres (with accessories 111.868.00.1 fastening distance can extend from 380 - 580 mm)
• For installation in a room-high Duofix system wall• For installation in a load bearing stud wall• For a screed of 0 - 200 mm• For washbasin with concealed wall-mounted tap• Disc for mounting the concealed wall-mounted tap
Characteristics
• Frame height 1120 mm to 1300 mm• Frame with holes ø 9 mm for fastening in wood frame construction• Washbasin fastening distance 50 - 380 mm• Galvanised leg supports, steplessly adjustable 0 - 200 mm• Self-supporting• Frame with C profile 40/40 mm• Powder-coated frame, ultramarine blue• Feet can be retracted 5 cm• Rotating foot plate, for installation in UW50 and UW75 profiles• Fastening for outlet bend, adjustable height• Fastening plate for concealed fittings, veneered wood, waterproof
bonded, adjustable in height and depth• Self-locking feet for tool-free alignment of the frame, (friction feet have
to be locked with spanner)
Additional NoteOutlet bend ø 50 mm; Seal ø 44/32 mm; 2 threaded rods M10 for ceramics fastening; Fastening material
Ordering Information
Geberit acoustic insulation set for washbasin
Application
• For solid-borne noise insulation with washbasins
Product Details
Additional Note2 acoustic insulation sleeves
Ordering Information
Taps
Geberit washbasin tap type 185, generator, without mixer New
Application
• For cold or mixed water connection• For extracting tap water• For public and semi-public areas• For installation in washbasin or work top• Not suitable for flow < 3 l/min
Characteristics
• Temperature is not adjustable• Infra-red user detection• Automatic triggering• Self-calibrating infra-red control• Vandal-proof• Setting and interrogation option with Geberit Service Handy• Flush actuation can be deactivated using Geberit Clean Handy• Volume flow control with aerator• Watersaver program adjustable• Interval flush program adjustable• Integrated check valve• Power supply from generator and rechargeable battery• Power supply, self-sufficient• When used on average 20 times per day for a duration 4 s each time,
the basin mixer will work independently
Product Details
Additional NoteGenerator unit; Adapter for angle stop valve G 3/8; Metal-reinforced hose R 3/8"; Basket filter; Key for aerator; Fastening material
Ordering Information
available Qtr 3 2012
Article no. PU1 PU4
111.493.00.1 1 10
Product material PE expanded
Article no. PU1
156.051.00.1 1
50
0-20
0
73
80
52
112-130
5-38
48
85
0
11
60
20
05
Taps
Product material Chrome-plated brass
Activation distance factory setting 16–18 cm
Activation distance adjustment range 1–33 cm
Ambient temperature 1–40 °C
Maximum operating temperature, short-term 90 °C
Flow rate at 3 bar 6 l/min
Max. operating temperature mixed water 45 °C
Battery type Li-ion (6,6 V)
Operating voltage 6.6 V DC
Operating pressure 2–8 bar
Article no. Colour PU1
116.335.21.1 gloss chrome 1
6−15
≥ 19
84
77
115
02−38
3/8"
ø 27-38
ø 64
≥ 25
63
16125
25°
Product GuideTaps
Product and Installation Guide Washroom & Bathroom 2012 41
Geberit washbasin tap type 186, genarator, without mixer New
Application
• For cold or mixed water connection• For extracting tap water• For public and semi-public areas• For installation in washbasin or work top• Not suitable for flow < 3 l/min
Characteristics
• Temperature is not adjustable• Infra-red user detection• Automatic triggering• Self-calibrating infra-red control• Vandal-proof• Setting and interrogation option with Geberit Service Handy• Flush actuation can be deactivated using Geberit Clean Handy• Volume flow control with aerator• Watersaver program adjustable• Interval flush program adjustable• Integrated check valve• Power supply from generator and rechargeable battery• When used on average 20 times per day for a duration 4 s each time,
the basin mixer will work independently
Product Details
Additional NoteGenerator unit; Adapter for angle stop valve G 3/8; Metal-reinforced hose R 3/8"; Basket filter; Key for aerator; Fastening material
Ordering Information
available Qtr 3 2012
Geberit lavatory tap type 186, generator, with below-desk mixer New
Application
• For cold and hot water connection• For extracting tap water• For public and semi-public areas• For installation in washbasin or work top• Not suitable for flow < 3 l/min
Characteristics
• Temperature pre-setting via below-desk mixer• Infra-red user detection• Automatic triggering• Self-calibrating infra-red control• Vandal-proof• Setting and interrogation option with Geberit Service Handy• Flush actuation can be deactivated using Geberit Clean Handy• Volume flow control with aerator• Watersaver program adjustable• Interval flush program adjustable• Integrated check valve• Power supply from generator and rechargeable battery• When used on average 20 times per day for a duration 4 s each time,
the basin mixer will work independently
Product Details
Additional NoteGenerator unit; Below-desk mixer; Adapter for angle stop valve G 3/8; 2 metal-reinforced hoses R 3/8"; 2 basket filters; Key for aerator; Fastening material
Ordering Information
available Qtr 3 2012
Product material Chrome-plated brass
Activation distance factory setting 16–18 cm
Activation distance adjustment range 1–33 cm
Ambient temperature 1–40 °C
Maximum operating temperature, short-term 90 °C
Flow rate at 3 bar 6 l/min
Max. operating temperature mixed water 45 °C
Battery type Li-ion (6,6 V)
Operating voltage 6.6 V DC
Operating pressure 2–8 bar
Article no. Colour PU1
116.336.21.1 gloss chrome 1
6−15
≥ 19
84
77
13
02−38
3/8"
ø 27-38
ø 64
63
1225°
95
≥ 25
Differentiated pressure CW/WW ≤ 1.5 bar
Product material Chrome-plated brass
Activation distance factory setting 16–18 cm
Activation distance adjustment range 1–33 cm
Ambient temperature 1–40 °C
Maximum operating temperature, short-term 90 °C
Flow rate at 3 bar 6 l/min
Operating temperature water max. 65 °C
Battery type Li-ion (6,6 V)
Operating voltage 6.6 V DC
Operating pressure 2–8 bar
Article no. Colour PU1
116.366.21.1 gloss chrome 1
12−30
≥ 2484
77
3/8"
63
84
13
02−38
ø 27-38
ø 64
12 95
25°
≥ 25
42 Product and Installation Guide Washroom & Bathroom 2012
Product GuideTaps
Geberit washbasin tap type 60, mains operation, without mixer, without power supply unit
Application
• For cold or mixed water connection• For installation in washbasin or work top
Characteristics
• Electrical power supply via power supply unit• Volume flow control with aerator• Automatic triggering• Self-calibrating infra-red control• Vandal-proof• Requires transformer 241.692.00.1
Product Details
Additional NoteConnection cable 1.7 m for power supply unit; Metal-reinforced hose R 3/8"; Filter; Fastening material
Excluded: Power supply unit 241.692.00.1
Ordering Information
Geberit washbasin tap type 60, battery operated, without mixer
Application
• For cold or mixed water connection• For installation in washbasin or work top
Characteristics
• Electrical power supply via power supply unit• Volume flow control with aerator• Automatic triggering• Self-calibrating infra-red control• Vandal-proof• Requires transformer 241.692.00.1
Product Details
Additional Note6 V battery; Metal-reinforced hose R 3/8"; Filter; Fastening material
Ordering Information
Max. operating temperature mixed water 45 °C
Maximum operating temperature, short-term 90 °C
Product material Chrome-plated brass
Activation distance factory setting 22 cm
Activation distance adjustment range 5–22 cm
Operating pressure 1–8 bar
Ambient temperature 1–40 °C
Flow rate at 3 bar 6 l/min
Nominal voltage 230 V AC
Mains frequency 50 Hz
Operating voltage 9 V DC
Article no. Colour PU1 PU4
115.740.21.1 gloss chrome 1 62
135
122
193
05-3
36 SW36
SW19
35
56
G 3/8
22
Max. operating temperature mixed water 45 °C
Maximum operating temperature, short-term 90 °C
Product material Chrome-plated brass
Activation distance factory setting 22 cm
Activation distance adjustment range 5–22 cm
Operating pressure 1–8 bar
Ambient temperature 1–40 °C
Flow rate at 3 bar 6 l/min
Operating voltage 6 V DC
Battery type CR - P2 (6 V)
Article no. Colour PU1 PU4
115.733.21.1 gloss chrome 1 62
135
122
193
05-3
36 SW36
SW19
35
56
G 3/8
22
Product GuideTaps
Product and Installation Guide Washroom & Bathroom 2012 43
Geberit washbasin tap type 60, mains operation, with mixer and handle, without power supply unit
Application
• For cold and hot water connection• For installation in washbasin or work top
Characteristics
• Electrical power supply via power supply unit• Volume flow control with aerator• Automatic triggering• Self-calibrating infra-red control• Vandal-proof• Requires transformer 241.692.00.1
Product Details
Additional NoteConnection cable 1.7 m for power supply unit; 2 metal-reinforced hoses R 3/8"; 2 non-return valves 3/8"; 2 filters; Fastening material
Excluded: Power supply unit 241.692.00.1
Ordering Information
Geberit washbasin tap type 60, battery operated, with mixer and handle
Application
• For cold and hot water connection• For extracting tap water• For public and semi-public areas• For installation in washbasin or work top
Characteristics
• Power supply by battery• Temperature adjustment via the mixer lever• Volume flow control with aerator• Infra-red user detection• Automatic triggering• Self-calibrating infra-red control• Vandal-proof• Setting and interrogation option with Geberit Service Handy
Product Details
Additional Note6 V battery; 2 metal-reinforced hoses R 3/8"; 2 non-return valves 3/8"; 2 filters; Fastening material; Key for aerator
Ordering Information
Differentiated pressure CW/WW ≤ 1.5 bar
Operating temperature water max. 65 °C
Maximum operating temperature, short-term 90 °C
Product material Chrome-plated brass
Activation distance factory setting 22 cm
Activation distance adjustment range 5–22 cm
Operating pressure 1–8 bar
Ambient temperature 1–40 °C
Flow rate at 3 bar 6 l/min
Nominal voltage 230 V AC
Mains frequency 50 Hz
Operating voltage 9 V DC
Article no. Colour PU1 PU4
115.738.21.1 gloss chrome 1 62
135
122
193
05-3
36 SW36
SW19
35
56
G 3/8
22
Differentiated pressure CW/WW ≤ 1.5 bar
Operating temperature water max. 65 °C
Maximum operating temperature, short-term 90 °C
Product material Chrome-plated brass
Activation distance factory setting 22 cm
Activation distance adjustment range 5–22 cm
Operating pressure 1–8 bar
Ambient temperature 1–40 °C
Flow rate at 3 bar 6 l/min
Operating voltage 6 V DC
Battery type CR - P2 (6 V)
Article no. Colour PU1
115.723.21.1 gloss chrome 1
135
122
193
05-3
36 SW36
SW19
35
56
G 3/8
22
44 Product and Installation Guide Washroom & Bathroom 2012
Product GuideTaps
Geberit washbasin tap type 60, mains operation, with mixer without handle, without power supply unit
Application
• For cold and hot water connection• For extracting tap water• For public and semi-public areas• For installation in washbasin or work top
Characteristics
• Electrical power supply via power supply unit• Temperature pre-setting via the internal mixer• Volume flow control with aerator• Infra-red user detection• Automatic triggering• Self-calibrating infra-red control• Vandal-proof• Setting and interrogation option with Geberit Service Handy• Requires transformer 241.692.00.1
Product Details
Additional NoteConnection cable 1.7 m for power supply unit; 2 metal-reinforced hoses R 3/8"; 2 non-return valves 3/8"; 2 filters; Fastening material
Excluded: Power supply unit 241.692.00.1
Ordering Information
Geberit washbasin tap type 60, battery operated, with mixer without handle
Application
• For cold and hot water connection• For extracting tap water• For public and semi-public areas• For installation in washbasin or work topCharacteristics
• Power supply by battery• Temperature pre-setting via the internal mixer• Volume flow control with aerator• Infra-red user detection• Automatic triggering• Self-calibrating infra-red control• Vandal-proof• Setting and interrogation option with Geberit Service HandyProduct Details
Additional Note6 V battery; 2 metal-reinforced hoses R 3/8"; 2 non-return valves 3/8"; 2 filters; Fastening material; Key for aerator
Ordering Information
Concealed 230 V power supply unit for Geberit washbasin tap type 60
Application• For concealed installation• For parallel connection of up to six Geberit washbasin taps with infra-
red controlProduct Details
Ordering Information
Differentiated pressure CW/WW ≤ 1.5 bar
Operating temperature water max. 65 °C
Maximum operating temperature, short-term 90 °C
Product material Chrome-plated brass
Activation distance factory setting 22 cm
Activation distance adjustment range 5–22 cm
Operating pressure 1–8 bar
Ambient temperature 1–40 °C
Flow rate at 3 bar 6 l/min
Nominal voltage 230 V AC
Mains frequency 50 Hz
Operating voltage 9 V DC
Article no. Colour PU1 PU4
115.739.21.1 gloss chrome 1 62
135
122
193
05-3
36 SW36
SW19
35
56
G 3/8
22
Differentiated pressure CW/WW ≤ 1.5 bar
Operating temperature water max. 65 °C
Maximum operating temperature, short-term 90 °C
Product material Chrome-plated brass
Activation distance factory setting 22 cm
Activation distance adjustment range 5–22 cm
Operating pressure 1–8 bar
Ambient temperature 1–40 °C
Flow rate at 3 bar 6 l/min
Operating voltage 6 V DC
Battery type CR - P2 (6 V)
Article no. Colour PU1
115.725.21.1 gloss chrome 1
Nominal voltage 230 V AC
Mains frequency 50 Hz
Output voltage 9 V DC
Article no. PU1
241.692.00.1 1
135
122
193
05-3
36 SW36
SW19
35
56
G 3/8
22
55
55
Product GuideTaps
Product and Installation Guide Washroom & Bathroom 2012 45
Geberit washbasin tap type 185, mains operation, without mixer
Application
• For cold or mixed water connection• For extracting tap water• For public and semi-public areas• For installation in washbasin or work top
Characteristics
• Temperature is not adjustable• Infra-red user detection• Automatic triggering• Self-calibrating infra-red control• Can be changed from mains operation to battery operation• Vandal-proof• Setting and interrogation option with Geberit Service Handy• Flush actuation can be deactivated using Geberit Clean Handy• Volume flow control with aerator• Various functions can be set manually• Watersaver program adjustable• Interval flush program adjustable• Integrated check valve• Electrical power supply via power supply unit• Requires transformer 241.672.00.1
Product Details
Additional NoteMetal-reinforced hose R 3/8"; Filter; Key for aerator; 1.5 m connection cable; Power supply unit; Fastening material
Ordering Information
Geberit washbasin tap type 185, battery operated, without mixer
Application
• For cold or mixed water connection• For extracting tap water• For public and semi-public areas• For installation in washbasin or work top
Characteristics
• Temperature is not adjustable• Infra-red user detection• Automatic triggering• Self-calibrating infra-red control• Vandal-proof• Setting and interrogation option with Geberit Service Handy• Flush actuation can be deactivated using Geberit Clean Handy• Volume flow control with aerator• Various functions can be set manually• Watersaver program adjustable• Interval flush program adjustable• Integrated check valve• Power supply by battery• Battery is sufficient to activate the water flow 200000 times• Warning if the battery is low• Energy saving mode can be set
Product Details
Additional NoteMetal-reinforced hose R 3/8"; Filter; 6 V battery; Key for aerator; Fastening material
Ordering Information
Product material Chrome-plated brass
Activation distance factory setting 16–18 cm
Activation distance adjustment range 1–33 cm
Ambient temperature 1–40 °C
Maximum operating temperature, short-term 90 °C
Flow rate at 3 bar 6 l/min
Mains frequency 50 Hz
Nominal voltage 230 V AC
Operating voltage 12 V AC
Max. operating temperature mixed water 45 °C
Operating pressure 0.5–8 bar
Article no. Colour PU1 PU4
116.135.21.1 gloss chrome 1 81
115
25°
02-38
125
3/8"
Ø 27-38
Ø 64
14
448
16
Product material Chrome-plated brass
Activation distance factory setting 16–18 cm
Activation distance adjustment range 1–33 cm
Ambient temperature 1–40 °C
Maximum operating temperature, short-term 90 °C
Flow rate at 3 bar 6 l/min
Operating voltage 6 V DC
Battery type CR - P2 (6 V)
Max. operating temperature mixed water 45 °C
Operating pressure 0.5–8 bar
Article no. Colour PU1
116.235.21.1 gloss chrome 1
115
25°
02-38
125
3/8"
Ø 27-38
Ø 64
14
448
16
46 Product and Installation Guide Washroom & Bathroom 2012
Product GuideTaps
Geberit washbasin tap type 185, mains operation, with mixer and handle
Application
• For cold and hot water connection• For extracting tap water• For public and semi-public areas• For installation in washbasin or work top
Characteristics
• Temperature adjustment via the mixer lever• Unmixed hot or cold water cannot be adjusted• Proportion of hot water can be limited• Infra-red user detection• Automatic triggering• Self-calibrating infra-red control• Can be changed from mains operation to battery operation• Vandal-proof• Setting and interrogation option with Geberit Service Handy• Flush actuation can be deactivated using Geberit Clean Handy• Volume flow control with aerator• Various functions can be set manually• Watersaver program adjustable• Interval flush program adjustable• Integrated check valve• Electrical power supply via power supply unit• Requires transformer 241.672.00.1
Product Details
Additional Note2 metal-reinforced hoses R 3/8"; 2 filters; Key for aerator; 1.5 m connection cable; Power supply unit; Fastening material
Ordering Information
Geberit washbasin tap type 185, battery-operated, with mixer and handle
Application
• For cold and hot water connection• For extracting tap water• For public and semi-public areas• For installation in washbasin or work top
Characteristics
• Temperature adjustment via the mixer lever• Unmixed hot or cold water cannot be adjusted• Proportion of hot water can be limited• Infra-red user detection• Automatic triggering• Self-calibrating infra-red control• Vandal-proof• Setting and interrogation option with Geberit Service Handy• Flush actuation can be deactivated using Geberit Clean Handy• Volume flow control with aerator• Various functions can be set manually• Watersaver program adjustable• Interval flush program adjustable• Integrated check valve• Power supply by battery• Battery is sufficient to activate the water flow 200000 times• Warning if the battery is low• Energy saving mode can be set
Product Details
Additional Note2 metal-reinforced hoses R 3/8"; 2 filters; 6 V battery; Key for aerator; Fastening material
Ordering Information
Differentiated pressure CW/WW ≤ 1.5 bar
Operating pressure 0.5–8 bar
Product material Chrome-plated brass
Activation distance factory setting 16–18 cm
Activation distance adjustment range 1–33 cm
Ambient temperature 1–40 °C
Maximum operating temperature, short-term 90 °C
Flow rate at 3 bar 6 l/min
Mains frequency 50 Hz
Nominal voltage 230 V AC
Operating voltage 12 V AC
Operating temperature water max. 65 °C
Article no. Colour PU1
116.155.21.1 gloss chrome 1
115
25°
02-38
125
3/8"
Ø 27-38
Ø 64
14
448
16
Differentiated pressure CW/WW ≤ 1.5 bar
Operating pressure 0.5–8 bar
Product material Chrome-plated brass
Activation distance factory setting 16–18 cm
Activation distance adjustment range 1–33 cm
Ambient temperature 1–40 °C
Maximum operating temperature, short-term 90 °C
Flow rate at 3 bar 6 l/min
Operating voltage 6 V DC
Battery type CR - P2 (6 V)
Operating temperature water max. 65 °C
Article no. Colour PU1 PU4
116.255.21.1 gloss chrome 1 81
115
25°
02-38
125
3/8"
Ø 27-38
Ø 64
14
448
16
Product GuideTaps
Product and Installation Guide Washroom & Bathroom 2012 47
Geberit washbasin tap type 185, mains operation, with mixer without handle
Application
• For cold and hot water connection• For extracting tap water• For public and semi-public areas• For installation in washbasin or work top
Characteristics
• Temperature pre-setting via the internal mixer• Unmixed hot or cold water cannot be adjusted• Infra-red user detection• Automatic triggering• Self-calibrating infra-red control• Can be changed from mains operation to battery operation• Vandal-proof• Setting and interrogation option with Geberit Service Handy• Flush actuation can be deactivated using Geberit Clean Handy• Volume flow control with aerator• Various functions can be set manually• Watersaver program adjustable• Interval flush program adjustable• Integrated check valve• Electrical power supply via power supply unit• Requires transformer 241.672.00.1
Product Details
Additional Note2 metal-reinforced hoses R 3/8"; 2 filters; Key for aerator; 1.5 m connection cable; Power supply unit; Fastening material
Ordering Information
Geberit washbasin tap type 185, battery operated, with mixer without handle
Application
• For cold and hot water connection• For extracting tap water• For public and semi-public areas• For installation in washbasin or work top
Characteristics
• Temperature pre-setting via the internal mixer• Unmixed hot or cold water cannot be adjusted• Infra-red user detection• Automatic triggering• Self-calibrating infra-red control• Vandal-proof• Setting and interrogation option with Geberit Service Handy• Flush actuation can be deactivated using Geberit Clean Handy• Volume flow control with aerator• Various functions can be set manually• Watersaver program adjustable• Interval flush program adjustable• Integrated check valve• Power supply by battery• Battery is sufficient to activate the water flow 200000 times• Warning if the battery is low• Energy saving mode can be set
Product Details
Additional Note2 metal-reinforced hoses R 3/8"; 2 filters; 6 V battery; Key for aerator; Fastening material
Ordering Information
Differentiated pressure CW/WW ≤ 1.5 bar
Operating pressure 0.5–8 bar
Product material Chrome-plated brass
Activation distance factory setting 16–18 cm
Activation distance adjustment range 1–33 cm
Ambient temperature 1–40 °C
Maximum operating temperature, short-term 90 °C
Flow rate at 3 bar 6 l/min
Mains frequency 50 Hz
Nominal voltage 230 V AC
Operating voltage 12 V AC
Operating temperature water max. 65 °C
Article no. Colour PU1
116.145.21.1 gloss chrome 1
115
25°
02-38
125
3/8"
Ø 27-38
Ø 64
14
448
16
Differentiated pressure CW/WW ≤ 1.5 bar
Operating pressure 0.5–8 bar
Product material Chrome-plated brass
Activation distance factory setting 16–18 cm
Activation distance adjustment range 1–33 cm
Ambient temperature 1–40 °C
Maximum operating temperature, short-term 90 °C
Flow rate at 3 bar 6 l/min
Operating voltage 6 V DC
Battery type CR - P2 (6 V)
Operating temperature water max. 65 °C
Article no. Colour PU1
116.245.21.1 gloss chrome 1
115
25°
02-38
125
3/8"
Ø 27-38
Ø 64
14
448
16
48 Product and Installation Guide Washroom & Bathroom 2012
Product GuideTaps
Geberit washbasin tap type 186, mains operation, without mixer
Application
• For cold or mixed water connection• For extracting tap water• For public and semi-public areas• For installation in washbasin or work top
Characteristics
• Temperature is not adjustable• Infra-red user detection• Automatic triggering• Self-calibrating infra-red control• Can be changed from mains operation to battery operation• Vandal-proof• Setting and interrogation option with Geberit Service Handy• Flush actuation can be deactivated using Geberit Clean Handy• Volume flow control with aerator• Various functions can be set manually• Watersaver program adjustable• Interval flush program adjustable• Integrated check valve• Electrical power supply via power supply unit• Requires transformer 241.672.00.1
Product Details
Additional NoteMetal-reinforced hose R 3/8"; Filter; Key for aerator; 1.5 m connection cable; Power supply unit; Fastening material
Ordering Information
Geberit washbasin tap type 186, battery operated, without mixer
Application
• For cold or mixed water connection• For extracting tap water• For public and semi-public areas• For installation in washbasin or work top
Characteristics
• Temperature is not adjustable• Infra-red user detection• Automatic triggering• Self-calibrating infra-red control• Vandal-proof• Setting and interrogation option with Geberit Service Handy• Flush actuation can be deactivated using Geberit Clean Handy• Volume flow control with aerator• Various functions can be set manually• Watersaver program adjustable• Interval flush program adjustable• Integrated check valve• Power supply by battery• Battery is sufficient to activate the water flow 200000 times• Warning if the battery is low• Energy saving mode can be set
Product Details
Additional NoteMetal-reinforced hose R 3/8"; Filter; 6 V battery; Key for aerator; Fastening material
Ordering Information
Product material Chrome-plated brass
Activation distance factory setting 16–18 cm
Activation distance adjustment range 1–33 cm
Ambient temperature 1–40 °C
Maximum operating temperature, short-term 90 °C
Flow rate at 3 bar 6 l/min
Mains frequency 50 Hz
Nominal voltage 230 V AC
Operating voltage 12 V AC
Max. operating temperature mixed water 45 °C
Operating pressure 0.5–8 bar
Article no. Colour PU1 PU4
116.136.21.1 gloss chrome 1 81
13
25°
02-38
95
3/8"
Ø 27-38
Ø 64
12
14
448
Product material Chrome-plated brass
Activation distance factory setting 16–18 cm
Activation distance adjustment range 1–33 cm
Ambient temperature 1–40 °C
Maximum operating temperature, short-term 90 °C
Flow rate at 3 bar 6 l/min
Operating voltage 6 V DC
Battery type CR - P2 (6 V)
Max. operating temperature mixed water 45 °C
Operating pressure 0.5–8 bar
Article no. Colour PU1 PU4
116.236.21.1 gloss chrome 1 81
13
25°
02-38
95
3/8"
Ø 27-38
Ø 64
12
14
448
Product GuideTaps
Product and Installation Guide Washroom & Bathroom 2012 49
Geberit washbasin tap type 186, mains operation, with mixer and handle
Application
• For cold and hot water connection• For extracting tap water• For public and semi-public areas• For installation in washbasin or work top
Characteristics
• Temperature adjustment via the mixer lever• Unmixed hot or cold water cannot be adjusted• Proportion of hot water can be limited• Infra-red user detection• Automatic triggering• Self-calibrating infra-red control• Can be changed from mains operation to battery operation• Vandal-proof• Setting and interrogation option with Geberit Service Handy• Flush actuation can be deactivated using Geberit Clean Handy• Volume flow control with aerator• Various functions can be set manually• Watersaver program adjustable• Interval flush program adjustable• Integrated check valve• Electrical power supply via power supply unit• Requires transformer 241.672.00.1
Product Details
Additional Note2 metal-reinforced hoses R 3/8"; 2 filters; Key for aerator; 1.5 m connection cable; Power supply unit; Fastening material
Ordering Information
Geberit washbasin tap type 186, battery operated, with mixer and handle
Application
• For cold and hot water connection• For extracting tap water• For public and semi-public areas• For installation in washbasin or work top
Characteristics
• Temperature adjustment via the mixer lever• Unmixed hot or cold water cannot be adjusted• Proportion of hot water can be limited• Infra-red user detection• Automatic triggering• Self-calibrating infra-red control• Vandal-proof• Setting and interrogation option with Geberit Service Handy• Flush actuation can be deactivated using Geberit Clean Handy• Volume flow control with aerator• Various functions can be set manually• Watersaver program adjustable• Interval flush program adjustable• Integrated check valve• Power supply by battery• Battery is sufficient to activate the water flow 200000 times• Warning if the battery is low• Energy saving mode can be set
Product Details
Additional Note2 metal-reinforced hoses R 3/8"; 2 filters; 6 V battery; Key for aerator; Fastening material
Ordering Information
Differentiated pressure CW/WW ≤ 1.5 bar
Operating pressure 0.5–8 bar
Product material Chrome-plated brass
Activation distance factory setting 16–18 cm
Activation distance adjustment range 1–33 cm
Ambient temperature 1–40 °C
Maximum operating temperature, short-term 90 °C
Flow rate at 3 bar 6 l/min
Mains frequency 50 Hz
Nominal voltage 230 V AC
Operating voltage 12 V AC
Operating temperature water max. 65 °C
Article no. Colour PU1 PU4
116.156.21.1 gloss chrome 1 81
13
25°
02-38
95
3/8"
Ø 27-38
Ø 64
12
14
448
Differentiated pressure CW/WW ≤ 1.5 bar
Operating pressure 0.5–8 bar
Product material Chrome-plated brass
Activation distance factory setting 16–18 cm
Activation distance adjustment range 1–33 cm
Ambient temperature 1–40 °C
Maximum operating temperature, short-term 90 °C
Flow rate at 3 bar 6 l/min
Operating voltage 6 V DC
Battery type CR - P2 (6 V)
Operating temperature water max. 65 °C
Article no. Colour PU1 PU4
116.256.21.1 gloss chrome 1 81
13
25°
02-38
95
3/8"
Ø 27-38
Ø 64
12
14
448
50 Product and Installation Guide Washroom & Bathroom 2012
Product GuideTaps
Geberit washbasin tap type 186, mains operation, with mixer without handle
Application
• For cold and hot water connection• For extracting tap water• For public and semi-public areas• For installation in washbasin or work top
Characteristics
• Temperature pre-setting via the internal mixer• Unmixed hot or cold water cannot be adjusted• Infra-red user detection• Automatic triggering• Self-calibrating infra-red control• Can be changed from mains operation to battery operation• Vandal-proof• Setting and interrogation option with Geberit Service Handy• Flush actuation can be deactivated using Geberit Clean Handy• Volume flow control with aerator• Various functions can be set manually• Watersaver program adjustable• Interval flush program adjustable• Integrated check valve• Electrical power supply via power supply unit• Requires transformer 241.672.00.1
Product Details
Additional Note2 metal-reinforced hoses R 3/8"; 2 filters; Key for aerator; 1.5 m connection cable; Power supply unit; Fastening material
Ordering Information
Geberit washbasin tap type 186, battery operated, with mixer without handle
Application
• For cold and hot water connection• For extracting tap water• For public and semi-public areas• For installation in washbasin or work top
Characteristics
• Temperature pre-setting via the internal mixer• Unmixed hot or cold water cannot be adjusted• Infra-red user detection• Automatic triggering• Self-calibrating infra-red control• Vandal-proof• Setting and interrogation option with Geberit Service Handy• Flush actuation can be deactivated using Geberit Clean Handy• Volume flow control with aerator• Various functions can be set manually• Watersaver program adjustable• Interval flush program adjustable• Integrated check valve• Power supply by battery• Battery is sufficient to activate the water flow 200000 times• Warning if the battery is low• Energy saving mode can be set
Product Details
Additional Note2 metal-reinforced hoses R 3/8"; 2 filters; 6 V battery; Key for aerator; Fastening material
Ordering Information
Differentiated pressure CW/WW ≤ 1.5 bar
Operating pressure 0.5–8 bar
Product material Chrome-plated brass
Activation distance factory setting 16–18 cm
Activation distance adjustment range 1–33 cm
Ambient temperature 1–40 °C
Maximum operating temperature, short-term 90 °C
Flow rate at 3 bar 6 l/min
Mains frequency 50 Hz
Nominal voltage 230 V AC
Operating voltage 12 V AC
Operating temperature water max. 65 °C
Article no. Colour PU1 PU4
116.146.21.1 gloss chrome 1 81
13
25°
02-38
95
3/8"
Ø 27-38
Ø 64
12
14
448
Differentiated pressure CW/WW ≤ 1.5 bar
Operating pressure 0.5–8 bar
Product material Chrome-plated brass
Activation distance factory setting 16–18 cm
Activation distance adjustment range 1–33 cm
Ambient temperature 1–40 °C
Maximum operating temperature, short-term 90 °C
Flow rate at 3 bar 6 l/min
Operating voltage 6 V DC
Battery type CR - P2 (6 V)
Operating temperature water max. 65 °C
Article no. Colour PU1 PU4
116.246.21.1 gloss chrome 1 81
13
25°
02-38
95
3/8"
Ø 27-38
Ø 64
12
14
448
Product GuideTaps
Product and Installation Guide Washroom & Bathroom 2012 51
Geberit washbasin tap type 87, mains operation, without mixer
Application
• For wall mounted installation• For public and semi-public areas• For concealed installation• For use in the hygiene area• For use in the industrial area• For use in the Geberit Duofix system• For cold or mixed water connection
Characteristics
• Automatic triggering• Self-calibrating infra-red control• Interval flush program adjustable• Watersaver program adjustable• Various functions can be set manually• Vandal-proof• Volume flow control with aerator• Compatible with the MeplaFix water supply connection• Temperature is not adjustable• Electrical power supply via power supply unit• Requires transformer 241.672.00.1 or 241.631.00.1• Requires the HansaVarox concealed base unit 616.030.00.1
Product Details
Additional NoteNon-return valve; Filter; Key for aerator; 1.5 m connection cable; Fastening material
Excluded: Power supply unit
Ordering Information
Geberit washbasin tap type 87, mains operation, with mixer and handle
Application
• For wall mounted installation• For public and semi-public areas• For concealed installation• For use in the hygiene area• For use in the industrial area• For use in the Geberit Duofix system• For cold or mixed water connection
Characteristics
• Automatic triggering• Self-calibrating infra-red control• Interval flush program adjustable• Watersaver program adjustable• Various functions can be set manually• Vandal-proof• Volume flow control with aerator• Compatible with the MeplaFix water supply connection• Temperature adjustment via the mixer lever• Electrical power supply via power supply unit• Requires transformer 241.672.00.1 or 241.631.00.1• Requires the HansaVarox concealed base unit 616.030.00.1
Product Details
Additional Note2 non-return valves; 2 filters; Key for aerator; 1.5 m connection cable; Fastening material
Excluded: Power supply unit
Ordering Information
Flow rate with tap aerator 6l/min
Product materialBrass / chrome-plated die-cast zinc
Flow rate >0.1 l/s
Relative humidity ≤ 100%
Product materialBrass / chrome-plated die-cast zinc
Activation distance adjustment range 1–33 cm
Operating pressure 0.5–8 bar
Operating temperature 1–40 °C
Maximum operating temperature, short-term 90 °C
Max. operating temperature mixed water 45 °C
Activation distance factory setting 16–18 cm
Mains frequency 50 Hz
Nominal voltage 230 V AC
Operating voltage 12 V AC
Article no. Colour PU1 PU4
116.107.21.1 gloss chrome 1 60
13
13R1/2
15
5525°
25°
165
14
Differentiated pressure CW/WW ≤ 1.5 bar
Flow rate with tap aerator 6l/min
Flow rate >0.1 l/s
Relative humidity ≤ 100%
Product materialBrass / chrome-plated die-cast zinc
Activation distance adjustment range 1–33 cm
Operating pressure 0.5–8 bar
Operating temperature 1–40 °C
Maximum operating temperature, short-term 90 °C
Activation distance factory setting 16–18 cm
Mains frequency 50 Hz
Nominal voltage 230 V AC
Operating voltage 12 V AC
Article no. Colour PU1 PU4
116.127.21.1 gloss chrome 1 60
13
13R1/2R1/2
15
5525°
25°
165
14
52 Product and Installation Guide Washroom & Bathroom 2012
Product GuideTaps
Geberit washbasin tap type 87, mains operation, with mixer without handle
Application
• For wall mounted installation• For public and semi-public areas• For concealed installation• For use in the hygiene area• For use in the industrial area• For use in the Geberit Duofix system• For cold or mixed water connection
Characteristics
• Automatic triggering• Self-calibrating infra-red control• Interval flush program adjustable• Watersaver program adjustable• Various functions can be set manually• Vandal-proof• Volume flow control with aerator• Compatible with the MeplaFix water supply connection• Temperature pre-setting via the internal mixer• Electrical power supply via power supply unit• Requires transformer 241.672.00.1 or 241.631.00.1• Requires the HansaVarox concealed base unit 616.030.00.1
Product Details
Additional Note2 non-return valves; 2 filters; Key for aerator; 1.5 m connection cable; Fastening material
Excluded: Power supply unit
Ordering Information
Geberit washbasin tap type 88, mains operation, without mixer
Application
• For wall mounted installation• For public and semi-public areas• For concealed installation• For use in the hygiene area• For use in the industrial area• For use in the Geberit Duofix system• For cold or mixed water connection
Characteristics
• Automatic triggering• Self-calibrating infra-red control• Interval flush program adjustable• Watersaver program adjustable• Various functions can be set manually• Vandal-proof• Volume flow control with aerator• Compatible with the MeplaFix water supply connection• Temperature is not adjustable• Electrical power supply via power supply unit• Requires transformer 241.672.00.1 or 241.631.00.1• Requires the HansaVarox concealed base unit 616.030.00.1
Product Details
Additional NoteNon-return valve; Filter; Key for aerator; 1.5 m connection cable; Fastening material
Excluded: Power supply unit
Ordering Information
Differentiated pressure CW/WW ≤ 1.5 bar
Flow rate with tap aerator 6l/min
Flow rate >0.1 l/s
Relative humidity ≤ 100%
Product materialBrass / chrome-plated die-cast zinc
Activation distance adjustment range 1–33 cm
Operating pressure 0.5–8 bar
Operating temperature 1–40 °C
Maximum operating temperature, short-term 90 °C
Activation distance factory setting 16–18 cm
Mains frequency 50 Hz
Nominal voltage 230 V AC
Operating voltage 12 V AC
Article no. Colour PU1 PU4
116.117.21.1 gloss chrome 1 60
13
13R1/2R1/2
15
5525°
25°
165
14
Flow rate with tap aerator 6l/min
Flow rate >0.1 l/s
Relative humidity ≤ 100%
Product materialBrass / chrome-plated die-cast zinc
Activation distance adjustment range 1–33 cm
Operating pressure 0.5–8 bar
Operating temperature 1–40 °C
Maximum operating temperature, short-term 90 °C
Max. operating temperature mixed water 45 °C
Activation distance factory setting 16–18 cm
Mains frequency 50 Hz
Nominal voltage 230 V AC
Operating voltage 12 V AC
Article no. Colour PU1 PU4
116.108.21.1 gloss chrome 1 60
13
13R1/2
215
19
15
5525°
25°
Product GuideTaps
Product and Installation Guide Washroom & Bathroom 2012 53
Geberit washbasin tap type 88, mains operation, with mixer and handle
Application
• For wall mounted installation• For public and semi-public areas• For concealed installation• For use in the hygiene area• For use in the industrial area• For use in the Geberit Duofix system• For cold or mixed water connection
Characteristics
• Automatic triggering• Self-calibrating infra-red control• Interval flush program adjustable• Watersaver program adjustable• Various functions can be set manually• Vandal-proof• Volume flow control with aerator• Compatible with the MeplaFix water supply connection• Temperature adjustment via the mixer lever• Electrical power supply via power supply unit• Requires transformer 241.672.00.1 or 241.631.00.1• Requires the HansaVarox concealed base unit 616.030.00.1
Product Details
Additional Note2 non-return valves; 2 filters; Key for aerator; 1.5 m connection cable; Fastening material
Excluded: Power supply unit
Ordering Information
Geberit washbasin tap type 88, mains operation, with mixer without handle
Application
• For wall mounted installation• For public and semi-public areas• For concealed installation• For use in the hygiene area• For use in the industrial area• For use in the Geberit Duofix system• For cold or mixed water connection
Characteristics
• Automatic triggering• Self-calibrating infra-red control• Interval flush program adjustable• Watersaver program adjustable• Various functions can be set manually• Vandal-proof• Volume flow control with aerator• Compatible with the MeplaFix water supply connection• Temperature pre-setting via the internal mixer• Electrical power supply via power supply unit• Requires transformer 241.672.00.1 or 241.631.00.1• Requires the HansaVarox concealed base unit 616.030.00.1
Product Details
Additional Note2 non-return valves; 2 filters; Key for aerator; 1.5 m connection cable; Fastening material
Excluded: Power supply unit
Ordering Information
Differentiated pressure CW/WW ≤ 1.5 bar
Flow rate with tap aerator 6l/min
Flow rate >0.1 l/s
Relative humidity ≤ 100%
Product materialBrass / chrome-plated die-cast zinc
Activation distance adjustment range 1–33 cm
Operating pressure 0.5–8 bar
Operating temperature 1–40 °C
Maximum operating temperature, short-term 90 °C
Activation distance factory setting 16–18 cm
Mains frequency 50 Hz
Nominal voltage 230 V AC
Operating voltage 12 V AC
Article no. Colour PU1 PU4
116.128.21.1 gloss chrome 1 60
13
13R1/2R1/2
215
19
15
5525°
25°
Differentiated pressure CW/WW ≤ 1.5 bar
Flow rate with tap aerator 6l/min
Flow rate >0.1 l/s
Relative humidity ≤ 100%
Product materialBrass / chrome-plated die-cast zinc
Activation distance adjustment range 1–33 cm
Operating pressure 0.5–8 bar
Operating temperature 1–40 °C
Maximum operating temperature, short-term 90 °C
Activation distance factory setting 16–18 cm
Mains frequency 50 Hz
Nominal voltage 230 V AC
Operating voltage 12 V AC
Article no. Colour PU1 PU4
116.118.21.1 gloss chrome 1 60
13
13R1/2R1/2
215
19
15
5525°
25°
54 Product and Installation Guide Washroom & Bathroom 2012
Product GuideTaps
Power supply unit for Geberit washbasin tap type 185/186 and 85–88
Application
• For power supply of tap type 87/88 and tap type 185/186
Characteristics
• Power supply of up to 8 taps• Transformation of mains voltage to extra-low voltage
Product Details
Ordering Information
Geberit installation set with mains transformer
Application
• For concealed installation in solid or drywall construction• For power supply of tap type 87/88 and tap type 185/186
Characteristics
• Power supply of up to 8 taps• Transformation of mains voltage to extra-low voltage
Product Details
Additional NotePower supply unit; Concealed outlet for drilling diameter ø 76 mm; Cover for concealed outlet; Conduit pipe, 1.7 m
Ordering Information
Geberit concealed base unit set HANSAVAROX, for MeplaFix
Characteristics
• MeplaFix system elbow made from dezincification-resistant brass• Acoustically decoupled• For wall mounting tap type 87/88 wall-hung taps
Additional Note2 MeplaFix system elbows, pre-mounted; 1 MeplaFix system elbow, loose, with seal; Rubber collar; Fastening ring
Ordering Information
Converting set generator for washbasin tap New
Application
• For conversion of washbasin tap type 185/186 to power supply from generator
• For connection to washbasin tap type 185/186 with cold or mixed water operation
• Not suitable for flow < 3 l/min
Characteristics
• Power supply from generator and rechargeable battery• Power supply, self-sufficient• When used on average 20 times per day for a duration 4 s each time,
the basin mixer will work independently
Additional NoteGenerator unit; Power adapter, resource-saving; Adapter for angle stop valve G 3/8; Metal-reinforced hose R 3/8"; Basket filter
Ordering Information
available Qtr 3 2012
Nominal voltage 230 V AC
Output voltage 12 V AC
Article no. PU1
241.672.00.1 1
Nominal voltage 230 V AC
Mains frequency 50–60 Hz
Output voltage 12 V AC
Protection degree IP 20
Article no. PU1
241.631.00.1 1
77
77
Article no. R''
Dcm
D1cm
Hcm
Lcm
L1cm
lcm
Zcm
616.030.00.1 MF 1/2 10,4 11 7 14 11 2 5,5
Article no. PU1
116.450.00.1 1
L
RR
Z
H H
Z
D1
L1
l
D
Product GuideDuofix bidet frames
Product and Installation Guide Washroom & Bathroom 2012 55
Wall mounting set for generator unit New
Application
• For wall mounting of the generator unit
Additional NoteAngle bracket; Adapter; Metal-reinforced hose R 3/8"; Fastening material
Ordering Information
available Qtr 3 2012
Battery charger for generator unit New
Application
• For charging the generator unit• For troubleshooting with lavatory tap and generator unit
Ordering Information
available Qtr 3 2012
Duofix bidet frames
Geberit Duofix frame for bidet, H112
Application
• For installation of a wall-hung bidet with bolt fixings set at 180 or 230 mm centres
• For installation in a room-high Duofix system wall• For installation in a load bearing stud wall• For a screed of 0 - 200 mm
Characteristics
• Frame height 1120 mm• Bidet fastening distance 180 mm or 230 mm• Frame with holes ø 9 mm for fastening in wood frame construction• Galvanised leg supports, steplessly adjustable 0 - 200 mm• Self-supporting• Frame with C profile 40/40 mm• Powder-coated frame, ultramarine blue• Feet can be retracted 5 cm• Rotating foot plate, for installation in UW50 and UW75 profiles• With wall brackets to allow up to a 200 mm duct. For larger ducts up
to 400 mm use extension bolts 111.887.00.1• With backplate elbows and chrome isolating valves with 3/8" BSP
connection
Additional Note2 water connections R 1/2"; 2 angle stop valves R 1/2"; 2 Duofix PreWall brackets for system; 2 threaded rods M12 for ceramics fastening; Fastening material
Ordering Information
Article no. PU1
116.451.00.1 1
Article no. PU1
116.452.00.1 1
Duofix bidet frames
Article no. PU1
111.545.00.1 1
8090
100110
120130
140150
160170
180190
200210
220230
240250
260270
280290
300310
320330
340 350
360 964.161.00.0
8090100110
120130140150
160170180190
200210220230
240250260270
280290300310
320330340 350
360 964.162.00.0
964.160.00.0
112
50
100
0-20
0
73
18/238-38
48
10
0-20
4
0
56 Product and Installation Guide Washroom & Bathroom 2012
Product GuideDuofix bidet frames
Geberit Duofix frame for bidet, H98
Application
• For installation of a wall-hung bidet with bolt fixings set at 180 or 230 mm centres
• For installation in a partial-height Duofix system wall in front of a solid or drywall construction
• For mounting in front of a solid or drywall construction (order PreWall brackets 111.844.00.1 separately)
• For a screed of 0 - 200 mm
Characteristics
• Frame height 980 mm• Bidet fastening distance 180 mm or 230 mm• Frame with holes ø 9 mm for fastening in wood frame construction• Galvanised leg supports, steplessly adjustable 0 - 200 mm• Self-supporting• Frame with C profile 40/40 mm• Powder-coated frame, ultramarine blue• Feet can be retracted 5 cm• Rotating foot plate, for installation in UW50 and UW75 profiles• With wall brackets to allow up to a 200 mm duct. For larger ducts up
to 400 mm use extension bolts 111.887.00.1• With backplate elbows and chrome isolating valves with 3/8" BSP
connection
Additional Note2 water connections R 1/2"; 2 angle stop valves R 1/2"; 2 Duofix PreWall brackets for system; 2 threaded rods M12 for ceramics fastening; Fastening material
Ordering Information
Geberit Duofix frame for bidet, H82
Application
• For installation of a wall-hung bidet with bolt fixings set at 180 or 230 mm centres
• For installation in a partial-height Duofix system wall in front of a solid or drywall construction
• For mounting in front of a solid or drywall construction (order PreWall brackets 111.844.00.1 separately)
• For a screed of 0 - 200 mm
Characteristics
• Frame height 820 mm• Bidet fastening distance 180 mm or 230 mm• Frame with holes ø 9 mm for fastening in wood frame construction• Galvanised leg supports, steplessly adjustable 0 - 200 mm• Self-supporting• Frame with C profile 40/40 mm• Powder-coated frame, ultramarine blue• Feet can be retracted 5 cm• Rotating foot plate, for installation in UW50 and UW75 profiles• With wall brackets to allow up to a 200 mm duct. For larger ducts up
to 400 mm use extension bolts 111.887.00.1• With backplate elbows and chrome isolating valves with 3/8" BSP
connection
Additional Note2 water connections R 1/2"; 2 angle stop valves R 1/2"; 2 Duofix PreWall brackets for system; 2 threaded rods M12 for ceramics fastening; Fastening material
Ordering Information
Article no. PU1
111.544.00.1 1
964.160.00.0
964.160.00.0
98
50
0-20
0
73
18/23
8-38
48
10
0-20
4
0
Article no. PU1
111.543.00.1 1
8090
100110
120130
140150
160170
180190
200210
220230
240250
260270
280290
300310
320330
340 350
360 964.161.00.0
8090100110
120130140150
160170180190
200210220230
240250260270
280290300310
320330340 350
360 964.162.00.0
964.160.00.0
82
50
0-20
0
73
18/23
8-38
48
10
0-20
4
0
Product GuideDuofix urinal frames
Product and Installation Guide Washroom & Bathroom 2012 57
Duofix urinal frames
Geberit Duofix frame for urinal, H130, flush pipe with pipe interrupter for mains fed water supply
Application
• For installation of wall-hung urinals• For installation in a Duofix system wall in front of solid or drywall
construction• For installing in a load bearing stud wall• For mounting in front of a solid or drywall construction (order PreWall
brackets 111.844.00.1 separately)• For a screed of 0 - 200 mm (not in room height applications)• For mains fed water supply (note: Geberit urinal controls need a
minimum 1 bar supply)• For Geberit concealed urinal control• Not suitable for urinals with spreaders
Characteristics
• Frame with holes ø 9 mm for fastening in wood frame construction• Galvanised leg supports, steplessly adjustable 0 - 200 mm• Self-supporting• Frame with C profile 40/40 mm• Powder-coated frame, ultramarine blue• Feet can be retracted 5 cm• Rotating foot plate, for installation in UW50 and UW75 profiles• Frame height from 112 cm to 130 cm, depending on urinal• Water supply connection 1/2" (compatible with MeplaFix)• Water supply connection can be installed without tools• Water supply connection radially sealing• Stop valve with throttle pre-mounted• Pre-mounted conduit pipe for rinsing the pipe• Terminal provided• The protection cover protects the service opening against moisture
and dirt and can be mounted without tools and cut to length• Flexible connection hose between concealed housing and inlet• Inlet ø 32 mm, height-adjustable• Fastening for urinal with M8 threaded rod, adjustable height and
distance• Fastening for outlet bend sound-absorbing and height-adjustable• Self-locking feet for tool-free alignment of the frame, (friction feet have
to be locked with spanner)• Additional fastening possible for urinal with accessories• Conversion possible for urinals with spray head with accessories• Mechanical pipe interruptor for mains water connection• Please see page 123 for details of pipe interruptor drainage installation
Product Details
Additional NoteConcealed housing with water section; Protection box with cover; Water supply connection R 1/2"; Connection pipe between inlet ø 32 mm and urinal, incl. seal on urinal; Suction trap ø 50 mm, incl. seal to urinal; Outlet pipe, PVC, ø 50 mm, incl. seal on the suction trap; 2 threaded rods M8 for urinal fastening; Fastening material; To be installed with a check valve or similar providing backflow prevention protection
Excluded: Urinal flushing system
Ordering Information
Duofix urinal frames
1300
320-360
0-200
0
73
500
75-330
R1/2
1000
75 90
48
0
1180
Flow rate at 1 bar without flow limiter 0.3 l/s
Flow rate at 1 bar with flow limiter 0,24 l/s
Relative humidity < 100 %
Operating pressure 1–8 bar
Max. test pressure water 16 bar
Max. test pressure air / inert gas 3 bar
Operating temperature water max. 30 °C
Article no. PU1
111.622.00.1 1
58 Product and Installation Guide Washroom & Bathroom 2012
Product GuideDuofix urinal frames
Geberit Duofix frame for urinal, H130, for tank fed water supply
Application
• For tank fed water supply with a dedicated source only (note: Geberit urinal controls need a minimum 1 bar supply)
• For installation of wall-hung urinals• For mains fed water with urinals Ideal Standard Jasper Morrison,
Villeroy & Boch Omina Classic (#7557), Duravit Starck 3 (#082135), Kohler Odela
• For installation in a half-height Duofix system wall in front of a solid or drywall construction
• For installation in a room-high Duofix system wall in front of a solid or drywall construction
• For installing in a load bearing stud wall• For mounting in front of a solid or drywall construction (order PreWall
brackets 111.844.00.1 separately)• For a screed of 0 - 200 mm (not in room height applications)• For Geberit concealed urinal control• Not suitable for urinals with spreaders
Characteristics
• Frame with holes ø 9 mm for fastening in wood frame construction• Galvanised leg supports, steplessly adjustable 0 - 200 mm• Self-supporting• Frame with C profile 40/40 mm• Powder-coated frame, ultramarine blue• Feet can be retracted 5 cm• Rotating foot plate, for installation in UW50 and UW75 profiles• Frame height from 112 cm to 130 cm, depending on urinal• Water supply connection 1/2" (compatible with MeplaFix)• Water supply connection can be installed without tools• Water supply connection radially sealing• Stop valve with throttle pre-mounted• Pre-mounted conduit pipe for rinsing the pipe• Terminal provided• The protection cover protects the service opening against moisture
and dirt and can be mounted without tools and cut to length• Flexible connection hose between concealed housing and inlet• Inlet ø 32 mm, height-adjustable• Fastening for urinal with M8 threaded rod, adjustable height and
distance• Fastening for outlet bend sound-absorbing and height-adjustable• Self-locking feet for tool-free alignment of the frame, (friction feet have
to be locked with spanner)• Additional fastening possible for urinal with accessories• Conversion possible for urinals with spray head with accessories
Product Details
Additional NoteConcealed housing with water section; Protection box with cover; Water supply connection R 1/2"; Connection pipe between inlet ø 32 mm and urinal, incl. seal on urinal; Suction trap ø 50 mm, incl. seal to urinal; Outlet pipe, PVC, ø 50 mm, incl. seal on the suction trap; 2 threaded rods M8 for urinal fastening; Fastening material; To be installed with a check valve or similar providing backflow prevention protection
Excluded: Urinal flushing system
Ordering Information
Flow rate at 1 bar without flow limiter 0.3 l/s
Flow rate at 1 bar with flow limiter 0,24 l/s
Relative humidity < 100 %
Operating pressure 1–8 bar
Max. test pressure water 16 bar
Max. test pressure air / inert gas 3 bar
Operating temperature water max. 30 °C
112-130
17-37
max. 65
0-20
0
min. 9
12-32
73
50
75-33
R1/2
48
75 9
100-118
0
0-20
Article no. PU1 PU4
111.623.00.1 1 14
Product GuideDuofix urinal frames
Product and Installation Guide Washroom & Bathroom 2012 59
Installation set for Geberit urinal flush control, electronic, plastic nipple
Application
• For concealed installation in solid constructions• For accommodating the touchless and pneumatic urinal controls• For mains fed water with urinals Ideal Standard Jasper Morrison,
Villeroy & Boch Omina Classic (#7557), Duravit Starck 3 (#082135), Kohler Odela
• For tank fed water supply (note: Geberit urinal controls need a minimum 1 bar supply)
Characteristics
• Water connection at the top centre• Water supply connection 1/2" (compatible with MeplaFix)• Water supply connection can be installed without tools• Water supply connection radially sealing• Stop valve with throttle pre-mounted• Pre-mounted conduit pipe for rinsing the pipe• Terminal provided• The protection cover protects the service opening against moisture
and dirt and can be mounted without tools and cut to length
Product Details
Additional NoteConcealed housing with water section; Protection box with cover; Water supply connection R 1/2"; To be installed with a check valve or similar providing backflow prevention protection
Ordering Information
Installation set for Geberit urinal flush control, electronic, with flush pipe
Application
• For concealed installation in solid constructions• For accommodating the touchless and pneumatic urinal controls• For tank fed water supply (note: Geberit urinal controls need a
minimum 1 bar supply)• For mains fed water with urinals Ideal Standard Jasper Morrison,
Villeroy & Boch Omina Classic (#7557), Duravit Starck 3 (#082135), Kohler Odela
Characteristics
• Water connection at the top centre• Water supply connection 1/2" (compatible with MeplaFix)• Water supply connection can be installed without tools• Water supply connection radially sealing• Stop valve with throttle pre-mounted• Pre-mounted conduit pipe for rinsing the pipe• Terminal provided• The protection cover protects the service opening against moisture
and dirt and can be mounted without tools and cut to length
Product Details
Additional NoteConcealed housing with water section; Protection box with cover; Water supply connection R 1/2"; Flush pipe D32; To be installed with a check valve or similar providing backflow prevention protection
Ordering Information
Flow rate at 1 bar without flow limiter 0.3 l/s
Flow rate at 1 bar with flow limiter 0,24 l/s
Operating pressure 1–8 bar
Max. test pressure water 16 bar
Relative humidity 95 %
Operating temperature water max. 30 °C
Article no. PU1
116.001.00.1 1
15
105
117
R1/2
15
105
7 1-9
Flow rate at 1 bar without flow limiter 0.3 l/s
Flow rate at 1 bar with flow limiter 0,24 l/s
Operating pressure 1–8 bar
Max. test pressure water 16 bar
Relative humidity 95 %
Operating temperature water max. 30 °C
Article no. PU1
116.003.00.1 1
max. 61
15
105
R1/2
15
105
7 1-9
60 Product and Installation Guide Washroom & Bathroom 2012
Product GuideDuofix urinal frames
Duofix mounting plate for urinal division
Application
• For installation in a half-height Duofix system wall in front of a solid or drywall construction
• For installation in a room-high Duofix system wall in front of a solid or drywall construction
• For installation in a load bearing stud wall• For installation of urinal division
Characteristics
• Multi-layered, water-resistant bonding• Veneered wood plate• Can be cut to reduce distance between urinals
Product Details
Additional Note8 fastening brackets; Fastening material
Ordering Information
Geberit urinal division, plastic
Application
• For separating urinals mounted adjacent to one another
Characteristics
• Plastic urinal partition with concealed fastening• Corrosion-resistant bracket, hard-anodised surface
Additional NoteDistance bolts; Fastening material
Ordering Information
Geberit urinal division, glass, oval
Application
• For separating urinals mounted adjacent to one another • For mounting on solid or drywall constructions
Characteristics
• Concealed installation• Corrosion-resistant bracket, hard-anodised surface• Matt glass surface on both sides
Product Details
Additional NoteWall bracket; Cover; Fastening material
Ordering Information
Geberit urinal division, glass, rectangular
Application
• For separating urinals mounted adjacent to one another • For mounting on solid or drywall constructions
Characteristics
• Concealed installation• Corrosion-resistant bracket, hard-anodised surface• Matt glass surface on both sides
Product Details
Additional NoteWall bracket; Cover; Fastening material
Ordering Information
Product material Wood
Article no. PU1 PU4
111.859.00.1 1 40
Article no. Colour PU1 PU4
115.200.11.1 white 1 16
35
50
74
44
92-98
0
Product material ESG - (toughened safety glass)
Article no. Colour PU1 PU4
115.210.CD.1 light grey RAL7035 1 15
115.210.GT.1 light green RAL6027 1
Product material ESG - (toughened safety glass)
Article no. Colour PU1 PU4
115.214.CD.1 light grey RAL7035 1 15
115.214.GT.1 light green RAL6027 1 15
9350
525
95-105
0 4
08
35
75
75
80
496
95-105
0
50
35
4
08
75
75
Product GuideDuofix urinal frames
Product and Installation Guide Washroom & Bathroom 2012 61
Geberit urinal flush control, pneumatic, Sigma01New
Application
• For manual flush actuation of urinals• For assembly in urinal installation set
Characteristics
• Manual flush actuation• Low flush actuation force• Flush actuation when the flush button is released• Flush time setting with air nozzles (pneumatic)• Plastic flush plate, with securing bar
Product Details
Additional NoteFlush plate; Pneumatic control, pre-mounted on mounting frame; Pneumatic valve; Fastening material
Ordering Information
Geberit urinal flush control, electronic, mains operation, Sigma01 New
Application
• For automatic flush actuation of urinals• For assembly in urinal installation set
Characteristics
• Automatic flush actuation, user-controlled• Infra-red detection with background fade-out• Ready for operation after mains connection• Power-failure control system• Setting and interrogation option with Geberit Service Handy• Flush actuation can be deactivated using Geberit Clean Handy• Dynamic flushing time adjustment• Die-cast zinc cover plate, with securing bar
Product Details
Additional NoteCover plate with infra-red window; Infra-red control, premounted on mounting frame; Power supply unit; Solenoid valve; Fastening material
Ordering Information
Actuation force < 12 N
Flow rate at 1 bar without flow limiter 0.3 l/s
Flow rate at 1 bar with flow limiter 0,24 l/s
Operating pressure 1–8 bar
Max. test pressure water 16 bar
Max. test pressure air / inert gas 3 bar
Operating temperature water max. 30 °C
Relative humidity < 100 %
Flush time range 4 / 8 / 12 s
Article no. Colour PU1 PU2
116.011.11.5 white alpine 1 10
116.011.21.5 gloss chrome 1 10
116.011.46.5 matt chrome 1 10
13
13
09
Nominal voltage 110–240 V AC
Mains frequency 50–60 Hz
Power consumption < 0.5 W
Operating voltage 4.5 V DC
Protection degree IP 45
Flow rate at 1 bar without flow limiter 0.3 l/s
Flow rate at 1 bar with flow limiter 0,24 l/s
Operating pressure 1–8 bar
Max. test pressure water 16 bar
Max. test pressure air / inert gas 3 bar
Operating temperature water max. 30 °C
Relative humidity < 100 %
Flush time factory setting 4 s
Flush time range 3–15 s
Activation time 7 s
Activation time range 3–15 s
Interval flush factory setting 24 h
Interval flush adjustment range 1–168 h
Article no. Colour PU1 PU2
116.021.11.5 white alpine 1 10
116.021.21.5 gloss chrome 1 10
116.021.46.5 matt chrome 1 10
13
13
09
62 Product and Installation Guide Washroom & Bathroom 2012
Product GuideDuofix urinal frames
Geberit urinal flush control, electronic, battery operated, Sigma01 New
Application
• For automatic flush actuation of urinals• For assembly in urinal installation set
Characteristics
• Automatic flush actuation, user-controlled• Infra-red detection with background fade-out• Warning if the battery is low• Setting and interrogation option with Geberit Service Handy• Flush actuation can be deactivated using Geberit Clean Handy• Dynamic flushing time adjustment• Die-cast zinc cover plate, with securing bar
Product Details
Additional NoteCover plate with infra-red window; Infra-red control, premounted on mounting frame; Battery box; 2 lithium batteries; Solenoid valve; Fastening material
Ordering Information
Geberit urinal flush control, pneumatic, Sigma10
Application
• For manual flush actuation of urinals• For assembly in urinal installation set
Characteristics
• Manual flush actuation• Low flush actuation force• Flush actuation when the flush button is released• Flush time setting with air nozzles (pneumatic)• Plastic flush plate, with securing bar
Product Details
Additional NoteFlush plate; Pneumatic control, pre-mounted on mounting frame; Pneumatic valve; Fastening material
Ordering Information
Operating voltage 3 V DC
Power consumption < 0.5 W
Protection degree IP 45
Battery type Lithium battery 1.5 V (AA)
Lifetime lithium battery ~ 2 years
Lifetime alkaline battery ~ 1.5 years
Flow rate at 1 bar without flow limiter 0.3 l/s
Flow rate at 1 bar with flow limiter 0,24 l/s
Operating pressure 1–8 bar
Max. test pressure water 16 bar
Max. test pressure air / inert gas 3 bar
Operating temperature water max. 30 °C
Relative humidity < 100 %
Flush time factory setting 4 s
Flush time range 3–15 s
Activation time 7 s
Activation time range 3–15 s
Interval flush factory setting 24 h
Interval flush adjustment range 1–168 h
Article no. Colour PU1
116.031.11.5 white alpine 1
116.031.21.5 gloss chrome 1
116.031.46.5 matt chrome 1
13
13
09
Actuation force < 12 N
Flow rate at 1 bar without flow limiter 0.3 l/s
Flow rate at 1 bar with flow limiter 0,24 l/s
Operating pressure 1–8 bar
Max. test pressure water 16 bar
Max. test pressure air / inert gas 3 bar
Operating temperature water max. 30 °C
Relative humidity < 100 %
Flush time range 4 / 8 / 12 s
Article no. Colour PU1
116.015.KH.1 gloss chrome / matt chrome / gloss chrome 1
116.015.KJ.1 white / gloss chrome / white 1
116.015.KK.1 white / gold-plated / white 1
116.015.KL.1 white / matt chrome / matt chrome 1
116.015.KM.1 black / gloss chrome / black 1
116.015.KN.1 matt chrome / gloss chrome / matt chrome 1
13
13
13
Product GuideDuofix urinal frames
Product and Installation Guide Washroom & Bathroom 2012 63
Geberit urinal flush control, electronic, mains operation, Sigma10
Application
• For automatic flush actuation of urinals• For assembly in installation set
Characteristics
• Automatic flush actuation, user-controlled• Infra-red detection with background fade-out• Ready for operation after mains connection• Power-failure control system• Setting and interrogation option with Geberit Service Handy• Flush actuation can be deactivated using Geberit Clean Handy• Dynamic flushing time adjustment• Die-cast zinc cover plate, with securing bar
Product Details
Additional NoteCover plate with infra-red window; Infra-red control, premounted on mounting frame; Power supply unit; Solenoid valve; Fastening material
Ordering Information
Geberit urinal flush control, electronic, battery operated, Sigma10
Application
• For automatic flush actuation of urinals• For assembly in installation set
Characteristics
• Automatic flush actuation, user-controlled• Infra-red detection with background fade-out• Warning if the battery is low• Setting and interrogation option with Geberit Service Handy• Flush actuation can be deactivated using Geberit Clean Handy• Dynamic flushing time adjustment• Die-cast zinc cover plate, with securing bar
Product Details
Additional NoteCover plate with infra-red window; Infra-red control, premounted on mounting frame; Battery box; 2 lithium batteries; Solenoid valve; Fastening material
Ordering Information
Nominal voltage 110–240 V AC
Mains frequency 50–60 Hz
Power consumption < 0.5 W
Operating voltage 4.5 V DC
Protection degree IP 45
Flow rate at 1 bar without flow limiter 0.3 l/s
Flow rate at 1 bar with flow limiter 0,24 l/s
Operating pressure 1–8 bar
Max. test pressure water 16 bar
Max. test pressure air / inert gas 3 bar
Operating temperature water max. 30 °C
Relative humidity < 100 %
Flush time factory setting 4 s
Flush time range 3–15 s
Activation time 7 s
Activation time range 3–15 s
Interval flush factory setting 24 h
Interval flush adjustment range 1–168 h
Article no. Colour PU1
116.025.KH.1 gloss chrome / matt chrome / gloss chrome 1
116.025.KJ.1 white / gloss chrome / white 1
116.025.KK.1 white / gold-plated / white 1
116.025.KL.1 white / matt chrome / matt chrome 1
116.025.KM.1 black / gloss chrome / black 1
116.025.KN.1 matt chrome / gloss chrome / matt chrome 1
13
13
1
Operating voltage 3 V DC
Power consumption < 0.5 W
Protection degree IP 45
Battery type Lithium battery 1.5 V (AA)
Lifetime lithium battery ~ 2 years
Lifetime alkaline battery ~ 1.5 years
Flow rate at 1 bar without flow limiter 0.3 l/s
Flow rate at 1 bar with flow limiter 0,24 l/s
Operating pressure 1–8 bar
Max. test pressure water 16 bar
Max. test pressure air / inert gas 3 bar
Operating temperature water max. 30 °C
Relative humidity < 100 %
Flush time factory setting 4 s
Flush time range 3–15 s
Activation time 7 s
Activation time range 3–15 s
Interval flush factory setting 24 h
Interval flush adjustment range 1–168 h
Article no. Colour PU1
116.035.KH.1 gloss chrome / matt chrome / gloss chrome 1
116.035.KJ.1 white / gloss chrome / white 1
116.035.KK.1 white / gold-plated / white 1
116.035.KL.1 white / matt chrome / matt chrome 1
116.035.KM.1 black / gloss chrome / black 1
116.035.KN.1 matt chrome / gloss chrome / matt chrome 1
13
13
1
64 Product and Installation Guide Washroom & Bathroom 2012
Product GuideDuofix urinal frames
Geberit urinal flush control, pneumatic, Sigma50, for customisation
Application
• For manual flush actuation of urinals• For assembly in installation set
Characteristics
• Manual flush actuation• Low flush actuation force• Flush actuation when the flush button is released• Flush time setting with air nozzles (pneumatic)• Die-cast zinc flush plate, with securing bar
Product Details
Additional NoteFlush plate; Pneumatic control, pre-mounted on mounting frame; Pneumatic valve; Fastening material
Ordering Information
Geberit urinal flush control, pneumatic, Sigma50
Application
• For manual flush actuation of urinals• For assembly in installation set
Characteristics
• Manual flush actuation• Low flush actuation force• Flush actuation when the flush button is released• Flush time setting with air nozzles (pneumatic)• Die-cast zinc flush plate, with securing bar
Product Details
Additional NoteFlush plate; Pneumatic control, pre-mounted on mounting frame; Pneumatic valve; Fastening material
Ordering Information
Actuation force < 12 N
Flow rate at 1 bar without flow limiter 0.3 l/s
Flow rate at 1 bar with flow limiter 0,24 l/s
Operating pressure 1–8 bar
Max. test pressure water 16 bar
Max. test pressure air / inert gas 3 bar
Operating temperature water max. 30 °C
Relative humidity < 100 %
Flush time range 4 / 8 / 12 s
Article no. Colour PU1
116.016.00.1 for customisation 1
13
13
14
Actuation force < 12 N
Flow rate at 1 bar without flow limiter 0.3 l/s
Flow rate at 1 bar with flow limiter 0,24 l/s
Operating pressure 1–8 bar
Max. test pressure water 16 bar
Max. test pressure air / inert gas 3 bar
Operating temperature water max. 30 °C
Relative humidity < 100 %
Flush time range 4 / 8 / 12 s
Article no. Colour PU1
116.016.11.1 white alpine 1
116.016.DW.1 black RAL 9005 1
116.016.EP.1 pergamon 1
116.016.SE.1 green satinised 1
116.016.SD.1 smoked glass reflective 1
116.016.SC.1 white grains 1
13
13
14
Product GuideDuofix urinal frames
Product and Installation Guide Washroom & Bathroom 2012 65
Geberit urinal flush control, electronic, mains operation, Sigma50
Application
• For automatic flush actuation of urinals• For assembly in installation set
Characteristics
• Automatic flush actuation, user-controlled• Infra-red detection with background fade-out• Ready for operation after mains connection• Power-failure control system• Setting and interrogation option with Geberit Service Handy• Flush actuation can be deactivated using Geberit Clean Handy• Dynamic flushing time adjustment• Die-cast zinc cover plate, with securing bar
Product Details
Additional NoteCover plate with infra-red window; Infra-red control, premounted on mounting frame; Power supply unit; Solenoid valve; Fastening material
Ordering Information
Geberit urinal flush control, electronic, battery operated, Sigma50
Application
• For automatic flush actuation of urinals• For assembly in installation set
Characteristics
• Automatic flush actuation, user-controlled• Infra-red detection with background fade-out• Warning if the battery is low• Setting and interrogation option with Geberit Service Handy• Flush actuation can be deactivated using Geberit Clean Handy• Dynamic flushing time adjustment• Die-cast zinc cover plate, with securing bar
Product Details
Additional NoteCover plate with infra-red window; Infra-red control, premounted on mounting frame; Battery box; 2 lithium batteries; Solenoid valve; Fastening material
Ordering Information
Nominal voltage 110–240 V AC
Mains frequency 50–60 Hz
Power consumption < 0.5 W
Operating voltage 4.5 V DC
Protection degree IP 45
Flow rate at 1 bar without flow limiter 0.3 l/s
Flow rate at 1 bar with flow limiter 0,24 l/s
Operating pressure 1–8 bar
Max. test pressure water 16 bar
Max. test pressure air / inert gas 3 bar
Operating temperature water max. 30 °C
Relative humidity < 100 %
Flush time factory setting 4 s
Flush time range 3–15 s
Activation time 7 s
Activation time range 3–15 s
Interval flush factory setting 24 h
Interval flush adjustment range 1–168 h
Article no. Colour PU1
116.026.GH.1 brushed chrome 1
13
13
1
Operating voltage 3 V DC
Power consumption < 0.5 W
Protection degree IP 45
Battery type Lithium battery 1.5 V (AA)
Lifetime lithium battery ~ 2 years
Lifetime alkaline battery ~ 1.5 years
Flow rate at 1 bar without flow limiter 0.3 l/s
Flow rate at 1 bar with flow limiter 0,24 l/s
Operating pressure 1–8 bar
Max. test pressure water 16 bar
Max. test pressure air / inert gas 3 bar
Operating temperature water max. 30 °C
Relative humidity < 100 %
Flush time factory setting 4 s
Flush time range 3–15 s
Activation time 7 s
Activation time range 3–15 s
Interval flush factory setting 24 h
Interval flush adjustment range 1–168 h
Article no. Colour PU1
116.036.GH.1 brushed chrome 1
13
13
1
66 Product and Installation Guide Washroom & Bathroom 2012
Product GuideDuofix urinal frames
Geberit urinal flush control, pneumatic, Bolero
Application
• For manual flush actuation of urinals• For assembly in installation set
Characteristics
• Manual flush actuation• Low flush actuation force• Flush actuation when the flush button is released• Flush time setting with air nozzles (pneumatic)• Plastic flush plate, with securing bar
Product Details
Additional NoteFlush plate; Pneumatic control, pre-mounted on mounting frame; Pneumatic valve; Fastening material
Ordering Information
Geberit urinal flush control, electronic, mains operation, Bolero
Application
• For automatic flush actuation of urinals• For assembly in installation set
Characteristics
• Automatic flush actuation, user-controlled• Infra-red detection with background fade-out• Ready for operation after mains connection• Power-failure control system• Setting and interrogation option with Geberit Service Handy• Flush actuation can be deactivated using Geberit Clean Handy• Dynamic flushing time adjustment• Die-cast zinc cover plate, with securing bar
Product Details
Additional NoteCover plate with infra-red window; Infra-red control, premounted on mounting frame; Power supply unit; Solenoid valve; Fastening material
Ordering Information
Actuation force < 12 N
Flow rate at 1 bar without flow limiter 0.3 l/s
Flow rate at 1 bar with flow limiter 0,24 l/s
Operating pressure 1–8 bar
Max. test pressure water 16 bar
Max. test pressure air / inert gas 3 bar
Operating temperature water max. 30 °C
Relative humidity < 100 %
Flush time range 4 / 8 / 12 s
Article no. Colour PU1
116.012.11.1 white alpine 1
116.012.21.1 gloss chrome 1
116.012.46.1 matt chrome 1
13
13
12
Nominal voltage 110–240 V AC
Mains frequency 50–60 Hz
Power consumption < 0.5 W
Operating voltage 4.5 V DC
Protection degree IP 45
Flow rate at 1 bar without flow limiter 0.3 l/s
Flow rate at 1 bar with flow limiter 0,24 l/s
Operating pressure 1–8 bar
Max. test pressure water 16 bar
Max. test pressure air / inert gas 3 bar
Operating temperature water max. 30 °C
Relative humidity < 100 %
Flush time factory setting 4 s
Flush time range 3–15 s
Activation time 7 s
Activation time range 3–15 s
Interval flush factory setting 24 h
Interval flush adjustment range 1–168 h
Article no. Colour PU1
116.022.11.1 white alpine 1
116.022.21.1 gloss chrome 1
116.022.46.1 matt chrome 1
13
13
12
Product GuideDuofix urinal frames
Product and Installation Guide Washroom & Bathroom 2012 67
Geberit urinal flush control, electronic, battery operated, Bolero
Application
• For automatic flush actuation of urinals• For assembly in installation set
Characteristics
• Automatic flush actuation, user-controlled• Infra-red detection with background fade-out• Warning if the battery is low• Setting and interrogation option with Geberit Service Handy• Flush actuation can be deactivated using Geberit Clean Handy• Dynamic flushing time adjustment• Die-cast zinc cover plate, with securing bar
Product Details
Additional NoteCover plate with infra-red window; Infra-red control, premounted on mounting frame; Battery box; 2 lithium batteries; Solenoid valve; Fastening material
Ordering Information
Geberit urinal flush control, pneumatic, Mambo
Application
• For manual flush actuation of urinals• For assembly in installation set
Characteristics
• Manual flush actuation• Low flush actuation force• Flush actuation when the flush button is released• Flush time setting with air nozzles (pneumatic)• Stainless steel flush plate, with securing bar
Product Details
Additional NoteFlush plate; Pneumatic control, pre-mounted on mounting frame; Pneumatic valve; Fastening material
Ordering Information
Operating voltage 3 V DC
Power consumption < 0.5 W
Protection degree IP 45
Battery type Lithium battery 1.5 V (AA)
Lifetime lithium battery ~ 2 years
Lifetime alkaline battery ~ 1.5 years
Flow rate at 1 bar without flow limiter 0.3 l/s
Flow rate at 1 bar with flow limiter 0,24 l/s
Operating pressure 1–8 bar
Max. test pressure water 16 bar
Max. test pressure air / inert gas 3 bar
Operating temperature water max. 30 °C
Relative humidity < 100 %
Flush time factory setting 4 s
Flush time range 3–15 s
Activation time 7 s
Activation time range 3–15 s
Interval flush factory setting 24 h
Interval flush adjustment range 1–168 h
Article no. Colour PU1
116.032.11.1 white alpine 1
116.032.21.1 gloss chrome 1
116.032.46.1 matt chrome 1
13
13
12
Actuation force < 12 N
Flow rate at 1 bar without flow limiter 0.3 l/s
Flow rate at 1 bar with flow limiter 0,24 l/s
Operating pressure 1–8 bar
Max. test pressure water 16 bar
Max. test pressure air / inert gas 3 bar
Operating temperature water max. 30 °C
Relative humidity < 100 %
Flush time range 4 / 8 / 12 s
Article no. Colour PU1
116.013.FW.1 brushed stainless steel 1
13
13
13
68 Product and Installation Guide Washroom & Bathroom 2012
Product GuideDuofix urinal frames
Geberit urinal flush control, electronic, mains operation, Mambo
Application
• For automatic flush actuation of urinals• For assembly in installation set
Characteristics
• Automatic flush actuation, user-controlled• Infra-red detection with background fade-out• Ready for operation after mains connection• Power-failure control system• Setting and interrogation option with Geberit Service Handy• Flush actuation can be deactivated using Geberit Clean Handy• Dynamic flushing time adjustment• Stainless steel cover plate, with securing bar
Product Details
Additional NoteCover plate with infra-red window; Infra-red control, premounted on mounting frame; Power supply unit; Solenoid valve; Fastening material
Ordering Information
Geberit urinal flush control, electronic, battery operation, Mambo
Application
• For automatic flush actuation of urinals• For assembly in installation set
Characteristics
• Automatic flush actuation, user-controlled• Infra-red detection with background fade-out• Warning if the battery is low• Setting and interrogation option with Geberit Service Handy• Flush actuation can be deactivated using Geberit Clean Handy• Dynamic flushing time adjustment• Stainless steel cover plate, with securing bar
Product Details
Additional NoteCover plate with infra-red window; Infra-red control, premounted on mounting frame; Battery box; 2 lithium batteries; Solenoid valve; Fastening material
Ordering Information
Nominal voltage 110–240 V AC
Mains frequency 50–60 Hz
Power consumption < 0.5 W
Operating voltage 4.5 V DC
Protection degree IP 45
Flow rate at 1 bar without flow limiter 0.3 l/s
Flow rate at 1 bar with flow limiter 0,24 l/s
Operating pressure 1–8 bar
Max. test pressure water 16 bar
Max. test pressure air / inert gas 3 bar
Operating temperature water max. 30 °C
Relative humidity < 100 %
Flush time factory setting 4 s
Flush time range 3–15 s
Activation time 7 s
Activation time range 3–15 s
Interval flush factory setting 24 h
Interval flush adjustment range 1–168 h
Article no. Colour PU1
116.023.FW.1 brushed stainless steel 1
13
13
11
Operating voltage 3 V DC
Power consumption < 0.5 W
Protection degree IP 45
Battery type Lithium battery 1.5 V (AA)
Lifetime lithium battery ~ 2 years
Lifetime alkaline battery ~ 1.5 years
Flow rate at 1 bar without flow limiter 0.3 l/s
Flow rate at 1 bar with flow limiter 0,24 l/s
Operating pressure 1–8 bar
Max. test pressure water 16 bar
Max. test pressure air / inert gas 3 bar
Operating temperature water max. 30 °C
Relative humidity < 100 %
Flush time factory setting 4 s
Flush time range 3–15 s
Activation time 7 s
Activation time range 3–15 s
Interval flush factory setting 24 h
Interval flush adjustment range 1–168 h
Article no. Colour PU1
116.033.FW.1 brushed stainless steel 1
13
13
11
Product GuideDuofix urinal frames
Product and Installation Guide Washroom & Bathroom 2012 69
Geberit urinal flush control, pneumatic, Tango
Application
• For manual flush actuation of urinals• For assembly in installation set
Characteristics
• Manual flush actuation• Low flush actuation force• Flush actuation when the flush button is released• Flush time setting with air nozzles (pneumatic)• Die-cast zinc flush plate, with securing bar
Product Details
Additional NoteFlush plate; Pneumatic control, pre-mounted on mounting frame; Pneumatic valve; Fastening material
Ordering Information
Geberit urinal flush control, electronic, mains operation, Tango
Application
• For automatic flush actuation of urinals• For assembly in installation set
Characteristics
• Automatic flush actuation, user-controlled• Infra-red detection with background fade-out• Ready for operation after mains connection• Power-failure control system• Setting and interrogation option with Geberit Service Handy• Flush actuation can be deactivated using Geberit Clean Handy• Dynamic flushing time adjustment• Die-cast zinc cover plate, with securing bar
Product Details
Additional NoteCover plate with infra-red window; Infra-red control, premounted on mounting frame; Power supply unit; Solenoid valve; Fastening material
Ordering Information
Actuation force < 12 N
Flow rate at 1 bar without flow limiter 0.3 l/s
Flow rate at 1 bar with flow limiter 0,24 l/s
Operating pressure 1–8 bar
Max. test pressure water 16 bar
Max. test pressure air / inert gas 3 bar
Operating temperature water max. 30 °C
Relative humidity < 100 %
Flush time range 4 / 8 / 12 s
Article no. Colour PU1
116.014.11.1 white alpine 1
116.014.21.1 gloss chrome 1
116.014.46.1 matt chrome 1
13
13
11
Nominal voltage 110–240 V AC
Mains frequency 50–60 Hz
Power consumption < 0.5 W
Operating voltage 4.5 V DC
Protection degree IP 45
Flow rate at 1 bar without flow limiter 0.3 l/s
Flow rate at 1 bar with flow limiter 0,24 l/s
Operating pressure 1–8 bar
Max. test pressure water 16 bar
Max. test pressure air / inert gas 3 bar
Operating temperature water max. 30 °C
Relative humidity < 100 %
Flush time factory setting 4 s
Flush time range 3–15 s
Activation time 7 s
Activation time range 3–15 s
Interval flush factory setting 24 h
Interval flush adjustment range 1–168 h
Article no. Colour PU1
116.024.11.1 white alpine 1
116.024.21.1 gloss chrome 1
116.024.46.1 matt chrome 1
13
13
08
70 Product and Installation Guide Washroom & Bathroom 2012
Product GuideAccessories
Geberit urinal flush control, electronic, battery operated, Tango
Application
• For automatic flush actuation of urinals• For assembly in installation set
Characteristics
• Automatic flush actuation, user-controlled• Infra-red detection with background fade-out• Warning if the battery is low• Setting and interrogation option with Geberit Service Handy• Flush actuation can be deactivated using Geberit Clean Handy• Dynamic flushing time adjustment• Die-cast zinc cover plate, with securing bar
Product Details
Additional NoteCover plate with infra-red window; Infra-red control, premounted on mounting frame; Battery box; 2 lithium batteries; Solenoid valve; Fastening material
Ordering Information
Accessories
Geberit Duofix room-height stud
Application
• For creating a load bearing stud wall• For installation in a room-high Duofix system wall• For installing as intermediate or connecting element• For fastening Duofix installation elements and Duofix cross bars• Suitable for installation under sloping roofs up to 50° roof slope
Characteristics
• Galvanised• Height-adjustable (telescopic)
Product Details
Additional Note1 rail clip; Fastening bracket; Fastening material
Ordering Information
Operating voltage 3 V DC
Power consumption < 0.5 W
Protection degree IP 45
Battery type Lithium battery 1.5 V (AA)
Lifetime lithium battery ~ 2 years
Lifetime alkaline battery ~ 1.5 years
Flow rate at 1 bar without flow limiter 0.3 l/s
Flow rate at 1 bar with flow limiter 0,24 l/s
Operating pressure 1–8 bar
Max. test pressure water 16 bar
Max. test pressure air / inert gas 3 bar
Operating temperature water max. 30 °C
Relative humidity < 100 %
Flush time factory setting 4 s
Flush time range 3–15 s
Activation time 7 s
Activation time range 3–15 s
Interval flush factory setting 24 h
Interval flush adjustment range 1–168 h
Article no. Colour PU1
116.034.11.1 white alpine 1
116.034.21.1 gloss chrome 1
116.034.46.1 matt chrome 1
13
13
08
Accessories
Product material Steel
Article no. Hcm
hcm
PU1
111.871.00.1 220 - 280 211 1
111.872.00.1 260 - 320 251 1
111.873.00.1 300 - 360 291 1
111.874.00.1 340 - 400 331 1
h
H
47
5
47
5
Product GuideAccessories
Product and Installation Guide Washroom & Bathroom 2012 71
Geberit Duofix part-height stud, height 82–130 cm
Application
• For installation in split-height PreWall construction in front of a solid or drywall construction
• For installation in a partial-height Duofix system wall in front of a solid or drywall construction
• For a screed of 0 - 200 mm
Characteristics
• Element height 820 - 1300 mm• Self-supporting• Support for lateral panelling• Galvanised leg supports, steplessly adjustable 0 - 200 mm• Rotating foot plate, for installation in UW50 and UW75 profiles• Powder-coated, colour Geberit blue
Product Details
Additional NoteRear wall fastening; 2 rail clips; Fastening material
Ordering Information
Geberit Duofix system rail set
Application
• For construction of Duofix PreWall or partition wall• For erecting room-high Duofix system wall
Characteristics
• Galvanised
Additional Note2 U-rails; Fastening material
Ordering Information
Geberit support brackets for ceramic WC appliances with small contact surface
Application
• For additional support of WC pans with contact surfaces (x) smaller than 170 mm
• For use with Geberit Duofix WC frames
Characteristics
• U-profiles, galvanised
Product Details
Ordering Information
Geberit Duofix foot fastening to rear wall
Application
• For alternatively fastening the feet of Duofix elements to the rear wall instead of the floor
Characteristics
• Galvanised• Adjustable depth, 130 - 200 mm
Product Details
Additional NoteFastening material
Ordering Information
Product material Steel
Article no. PU1 PU2 PU4
111.830.00.1 1 5 50
Article no. PU1 PU4
111.878.00.1 1 80
82-130
4
0-20
0
73
4
48
300
5
34
Product material Steel
Article no. PU1
111.847.00.1 1
Product material Steel
Article no. PU1
111.867.00.1 1
X
13 - 20
72 Product and Installation Guide Washroom & Bathroom 2012
Product GuideAccessories
Geberit fastening set for washbasins with fastening distance 38–58 cm
Application
• For fastening washbasins with a fastening distance larger than 380 mm to Duofix frame for washbasin
Characteristics
• Fastening distance adjustable 380 - 580 mm• Galvanised
Product Details
Additional NoteFastening material
Ordering Information
Geberit fastening set for stud clearance of 50–57.5 cm
Application
• For fastening Duofix frames between two studs with a distance of 50 - 65 cm
Characteristics
• Galvanised
Product Details
Additional NoteFastening material
Ordering Information
Geberit Duofix fastening bracket New
Application
• For fastening Geberit Duofix installation elements to Duofix room-height studs or Duofix studs for drywall construction
Product Details
Additional NoteFastening material
Ordering Information
Geberit Duofix wall anchoring for system set
Application
• For fastening Duofix frames in Duofix system rail• For fastening Duofix frames in front of solid or drywall construction
Characteristics
• Galvanised• Adjustable depth, 130 - 200 mm
Product Details
Additional Note2 Duofix PreWall brackets for system; 2 rail clips; 2 panelling supports, push-in; Fastening material
Ordering Information
Geberit Duofix wall anchoring with extension
Application
• For fastening Duofix frames in front of solid or drywall construction• Not suitable for use with Duofix system rail
Characteristics
• Galvanised• Adjustable depth, 130 - 400 mm
Product Details
Additional Note2 PreWall brackets; 2 M10 threaded rods with long nut; 2 Duofix PreWall bracket extensions M10 with long nut; 2 panelling supports, push-in; Fastening material
Ordering Information
Product material Steel
Article no. PU1
111.868.00.1 1
Product material Steel
Article no. PU1
111.869.00.1 1
Product material Steel
Article no. PU2 PU3
240.419.00.1 2 20
Product material Die-cast zinc
Article no. PU1 PU2 PU4
111.844.00.1 1 8 384
Product material Die-cast zinc
Article no. PU1
111.843.00.1 1
13-20
13-20
Product GuideAccessories
Product and Installation Guide Washroom & Bathroom 2012 73
Geberit Duofix wall anchoring for corner installation
Application
• For universal fastening of Duofix installation elements to a solid or drywall construction
Characteristics
• Variable angle adaptation for corner installation• Adjustable depth, 140 - 200 mm• Galvanised
Additional Note2 PreWall brackets; 2 M10 threaded rods with long nut; Fastening material
Excluded: Panelling supports, push-in
Ordering Information
Geberit Duofix wall anchoring extension
Application
• For extending Duofix wall anchorings from 200 - 400 mm
Product Details
Additional Note2 M10 threaded rods with long nut
Ordering Information
Geberit panel screw
Application
• For fastening of the panelling and Aqua plasterboard panels to the Duofix support system
Characteristics
• Self-drilling screws 4.2 x 35 mm
Ordering Information
Geberit Duofix hexagon/cross-head self drilling screw 5.5 x 19 mm
Characteristics
• Self-cutting, 5.5 x 19 mm• Galvanised
Ordering Information
Geberit Duofix insulation tape
Application
• To avoid the formation of cracks between Duofix panelling and building structure
Characteristics
• Single-sided self-adhesive• Permanently elastic• Vinyl foam tape
Ordering Information
Geberit Service Handy
Application
• For setting and enquiry of setting values of various electronic Geberit products such as washbasin taps, WC flush actuators, urinal controls and sanitary flushings
Characteristics
• 4-line display• Menu guidance• Saving and transfer of settings to other control units of the same type• Compatible with existing control units• Data transmission with infra-red light• Battery-operated
Additional NotePouch; 3 batteries type AAA 1.5 V
Ordering Information
Article no. PU1 PU2 PU4
111.835.00.1 1 20 560
Product material Die-cast zinc
Article no. PU1 PU2 PU4
111.887.00.1 1 10 2000
Article no. PU2 PU3
461.030.00.1 200 2000
14-20
220 M10
Article no. PU2
111.892.00.1 50
Article no. PU1 PU4
111.889.00.1 1 60
Article no. PU1
115.860.00.1 1
30 m
1
8
74 Product and Installation Guide Washroom & Bathroom 2012
Product GuideAccessories
Geberit Clean Handy
Application
• For deactivation of infra-red controlled Geberit flushing valves and flush actuators for sanitary cleaning
Characteristics
• Remote control
Additional NoteConcise instructions
Ordering Information
Cup for flush volume 4.5/3L, for Geberit Kappa concealed cistern 15 cm (UP200)
Application
• For Geberit concealed cistern UP200• For reducing flushing volumes to 4.5 l and 3l• Should only be used in conjunction with WCs suitable for low flushing
volumesOrdering Information
Cup for flush volume 4.5/3L, Geberit Sigma concealed cistern 12 cm (UP320)
Application
• For use with Geberit Sigma concealed cistern 12 cm (UP320)• For reducing flushing volumes to 4.5 l and 3l• Should only be used in conjunction with WCs suitable for low flushing
volumes
Ordering Information
Active carbon filter for Sigma40 odour extraction
Application
• For use with Sigma40 actuator plate with integrated odour extraction
Ordering Information
Article no. PU1 PU2
115.831.00.1 1 10
Article no. PU1
242.310.00.1 1
Article no. PU1
241.894.00.1 1
Article no. PU1
242.555.00.1 1
Product GuideDrainage
Product and Installation Guide Washroom & Bathroom 2012 75
Drainage
Geberit HDPE straight connector with ring seal socket
Application
• For all drainage pipes• For push-on seal• For WCs with horizontal outlet• For Duofix WC frames
Characteristics
• UV-resistant
Product Details
Additional NoteLip seal EPDM; Protection cap
Ordering Information
Geberit PVC S-bend 90/110
Product Details
Additional NoteLip seal EPDM; Sealing collar EPDM; Adhesive PVC-U
Ordering Information
Drainage
Product material PE-HD
Article no. dØmm
d1Ømm
Dcm
Lcm
lcm
Kcm
Colour PU1 PU3 PU4
366.887.16.1 90 90 11,2 31 27,5 24 black 1 40 160
367.887.16.1 110 90 11,2 34,5 31,5 28 black 1 30 120
Product material PVC
Article no. dØmm
ADcm
Hcm
Colour PU1 PU2 PU4
388.350.29.1 90 14,5 - 34,5 16,7 grey 1 10 80
d1d
L
D
l
K
dAD
H
di
76 Product and Installation Guide Washroom & Bathroom 2012
Product GuideDrainage
Geberit HDPE connector bend 90° with coupling and ring seal socket for Geberit Duofix frame for wall-hung WC
Application
• For all drainage pipes• For WCs with horizontal outlet• For Duofix WC elements
Characteristics
• UV-resistant
Product Details
Additional NoteLip seal EPDM; Protection cap
Ordering Information
Geberit HDPE connector bend 90° with coupling with ring seal socket
Application
• For all drainage pipes• For appliances with horizontal outlet
Characteristics
• UV-resistant
Product Details
Additional NoteLip seal EPDM; Protection cap
Ordering Information
Angle 90°
Product material PE-HD
Article no. dØmm
d1Ømm
Acm
angle Hcm
Kcm
Colour PU1 PU2 PU4
366.061.16.1 90 90 11 90° 22,5 13 black 1 10 120
Angle 90°
Product material PE-HD
Article no. dØmm
d1Ømm
Acm
angle acm
Hcm
Kcm
Colour PU1 PU2 PU3 PU4
367.792.16.1 110 110 7,5 90° 4,5 22,5 13 black 1 5 25 100
A
KH
d1
d
A
KH
a
d1
d
Product GuideDrainage
Product and Installation Guide Washroom & Bathroom 2012 77
Geberit HDPE connector bend 45° with connection ring seal socket
Application
• For all drainage pipes• For WCs with horizontal outlet• For Duofix WC frames
Characteristics
• UV-resistant
Product Details
Additional NoteLip seal EPDM; Protection cap
Ordering Information
Geberit PE adaptor sleeve
Application
• For all drainage pipes• For connecting 90 mm PE connectors to 110 mm sockets
Characteristics
• UV-resistant• With stop
Product Details
Additional NoteLip seal EPDM
Ordering Information
Angle 45°
Product material PE-HD
Article no. dØmm
d1Ømm
angle acm
Lcm
Kcm
Colour PU1
367.945.16.1 110 90 45° 6 8,7 3 black 1
Product material PE-HD
Article no. d1Ømm
d2Ømm
Colour PU1 PU2 PU4
367.928.16.1 90 110 black 1 10 600
45
d
K
d1
a
L
75
d2d1
78 Product and Installation Guide Washroom & Bathroom 2012
Product GuideDrainage
Geberit PVC connector manifold with coupling with ring seal socket for Geberit Duofix frame for wall-hung WC
Application
• For all drainage pipes• For Duofix WC frames when using floats
Product Details
Additional NoteManifold connector bend; Fin seal; 50 mm length of 110 mm PVC pipe
Ordering Information
Geberit WC collar set, extended, with fastening material
Application
• For Duofix WC frames
Product Details
Additional Note2 cover caps
Ordering Information
Product material PVC
Article no. dØmm
angle°
Z1cm
Z2cm
Colour PU1 PU3 PU4
107.35.05B 110 5° 0,64 6,23 black 1 12 360
F107.35.09B 110 9° 0,89 6,28 black 1 24 720
107.35.14B 110 14° 1,09 6,47 black 1 12 360
F107.35.18B 110 18° 1,13 6,47 black 1 12 360
107.35.24B 110 24° 1,4 6,95 black 1 12 360
F107.35.29B 110 29° 1,83 7,73 black 1 12 360
107.35.34B 110 34° 1,83 7,73 black 1 12 360
Product material PE
Article no. dØmm
d1Ømm
Lcm
L1cm
lcm
l1cm
Colour PU1 PU4
152.438.46.1 90 45 26,5 26,5 22 24 black and matt chrome 1 164
Z1Z2
d d
l1
d1 55
102±5d
L1
l
L
Product GuideDrainage
Product and Installation Guide Washroom & Bathroom 2012 79
Geberit PE flush pipe extension for concealed cistern
Application
• For extension of outlet sleeves• For combination with overflow pipe cone
Product Details
Ordering Information
Product material PE
Article no. dØmm
diØmm
smm
Acm²
Lm
Colour PU1 PU2 PU4
152.170.16.1 45 40 2,5 12,6 1 black 1 5 270
L (m)
d
s
di
Acm2
d
80 Product and Installation Guide Washroom & Bathroom 2012
Product GuideTraps
Traps
Geberit washbasin trap, PVC connection
Application
• For washbasin
Characteristics
• Water seal with partition wall• Corrosion-resistant• Plug connection on the outlet pipe• With 32 mm / 1 1/4" waste adaptor
Product Details
Ordering Information
Geberit bath drain, with ready-to-fit set, PVC adapter
Characteristics
• Without contraflow principle• Bathtub outlet and overflow assembly• Water seal• Pop-up operation• Outlet connection can be rotated as needed• With 40 mm / 1 1/2" waste adaptor
Additional NoteTrap; Cable actuator; Overflow; Outlet bend; Adaptor; Fastening material; Outlet cover
Ordering Information
Traps
Depth of water seal 75 mm
Drainage capacity 0.7 l/s
Article no. Colour PU1
151.039.21.1 gloss chrome 1
Article no. Colour PU1 PU2
150.535.21.1 gloss chrome 1 10
100
4340
160-30050
12040
92
180
180
Product GuideTraps
Product and Installation Guide Washroom & Bathroom 2012 81
Geberit bath drain, with ready-to-fit set, PVC adaptor, extra long
Characteristics
• Without contraflow principle• Bathtub outlet and overflow assembly• Water seal• Pop-up operation• Outlet connection can be rotated as needed• With 40 mm / 1 1/2" waste adaptor
Additional NoteTrap; Cable actuator; Overflow; T-piece; Outlet bend; Adaptor; Fastening material; Outlet cover
Ordering Information
Geberit bath drain with inlet, with ready-to-fit set, PVC adaptor
Characteristics
• Bathtub drain, overflow and inlet set• Water seal• Pop-up operation• Outlet connection can be rotated as needed• Direction of inlet jet flexible• Water supply connection bracket can be rotated • Water supply connection bracket suitable for Geberit Mepla pipes• Without contraflow principle• With 40 mm / 1 1/2" waste adaptor
Additional NoteTrap; Cable actuator; Overflow; Water inlet; Water supply connection bracket; Outlet bend; Adaptor; Fastening material; Outlet cover
Ordering Information
Article no. Colour PU1 PU2
150.536.21.1 gloss chrome 1 8
100
4340
160-30050
12040
92
180
180
Article no. Colour PU1 PU2
150.712.21.1 gloss chrome 1 12
100
4340
160-30050
3/4"/ 16
12040
92
180
180
82 Product and Installation Guide Washroom & Bathroom 2012
Product GuideTraps
Geberit bath drain with inlet, with ready-to-fit set, PVC adaptor, extra long
Characteristics
• Bathtub drain, overflow and inlet set• Water seal• Pop-up operation• Outlet connection can be rotated as needed• Direction of inlet jet flexible• Water supply connection bracket can be rotated • Water supply connection bracket suitable for Geberit Mepla pipes• Without contraflow principle• With 40 mm / 1 1/2" waste adaptor
Additional NoteTrap; Cable actuator; Overflow; Water inlet; T-piece; Water supply connection bracket; Outlet bend; Adaptor; Fastening material; Outlet cover
Ordering Information
Geberit PushControl bath drain, d52
Application
• For bathtubs with valve hole ø 52 mm• For bathtubs in standard size• To fit most european bath tubs
Characteristics
• Bathtub drain with push button actuation virtually flush with the tub• Construction height trap 90 mm• Odour trap 270° swivelling• Drain valve made from stainless steel• With 40 mm / 1 1/2" waste adaptor
Product Details
Additional NoteDrain valve; Trap; Overflow; Cable actuator; Ready-to-fit set; Outlet pipe
Ordering Information
Article no. Colour PU1 PU2
150.713.21.1 gloss chrome 1 12
100
4340
160-30050
3/4"/ 16
12040
92
180
180
Drainage capacity 1 l/s
Overflow capacity 0.65 l/s
Depth of water seal 50 mm
Article no. Colour PU1 PU2 PU4
150.770.11.1 white alpine 1 10 80
150.770.21.1 gloss chrome 1 10 80
145-26
23-46
45
59 89
14 10
4340
Product GuideTraps
Product and Installation Guide Washroom & Bathroom 2012 83
Geberit PushControl bath drain, d52, extra long
Application
• For bathtubs with valve hole ø 52 mm• For installation in bathtubs with special lengths• To fit most european bath tubs
Characteristics
• Bathtub drain with push button actuation virtually flush with the tub• Construction height trap 90 mm• Odour trap 270° swivelling• Drain valve made from stainless steel• With 40 mm / 1 1/2" waste adaptor
Product Details
Additional NoteDrain valve; Trap; Overflow; Cable actuator; Ready-to-fit set; Outlet pipe
Ordering Information
Geberit PushControl bath drain, d52, extra high
Application
• For bathtubs with valve hole ø 52 mm• For installation in bathtubs with special heights• To fit most european bath tubs
Characteristics
• Bathtub drain with push button actuation virtually flush with the tub• Construction height trap 90 mm• Odour trap 270° swivelling• Drain valve made from stainless steel• With 40 mm / 1 1/2" waste adaptor
Product Details
Additional NoteDrain valve; Trap; Overflow; Cable actuator; Ready-to-fit set; Outlet pipe
Ordering Information
Geberit connection set for acrylic bath with overflow
Application
• For acrylic bath with overflow
Additional NoteDrain valve seat extension with O-ring; Banjo bolt; Adjusting screw
Ordering Information
Drainage capacity 1 l/s
Overflow capacity 0.65 l/s
Depth of water seal 50 mm
Article no. Colour PU1 PU2 PU4
150.771.11.1 white alpine 1 10 80
150.771.21.1 gloss chrome 1 10 80
24-50
23-46
45
59 89
4340
14 10
Drainage capacity 1 l/s
Overflow capacity 0.65 l/s
Depth of water seal 50 mm
Article no. Colour PU1 PU2 PU4
150.772.11.1 white alpine 1 10 80
150.772.21.1 gloss chrome 1 10 80
Article no. PU1
150.247.00.1 1
15-28
44-60
45
59 89
4340
14 10
27
84 Product and Installation Guide Washroom & Bathroom 2012
Product GuideTraps
Geberit shower drain, d90, with ready-to-fit set, adaptor PVC
Application
• For shower trays with valve hole ø 90 mm• For shower trays without overflow
Characteristics
• Dip tube and dip tube support can be dismantled• Construction height 80 mm• With 40 mm / 1 1/2" waste adaptor
Product Details
Additional NoteTrap; Screw connection ø 40 mm; Outlet bend; Adaptor; Fastening material; Outlet cover
Ordering Information
Geberit shower drain, d50, with ready-to-fit set, adaptor PVC
Application
• For shower trays with valve hole ø 52 mm • For shower trays without overflow
Characteristics
• Dip tube and dip tube support can be dismantled• Construction height 85 mm• With 40 mm / 1 1/2" waste adaptor
Product Details
Additional NoteTrap; Outlet bend; Adaptor; Outlet cover
Ordering Information
Geberit Duofix shower frame, H130, outlet bend d50
Application
• For use within buildings• For drainage of wet room installations• For use with composite seals• For installation in a half-height Duofix system wall in front of a solid or
drywall construction• For installation in a room-high Duofix system wall• For screeded floors
Characteristics
• Self-supporting• Frame with C profile 40/40 mm• Powder-coated frame, ultramarine blue• Feet can be retracted 5 cm• Rotating foot plate, for installation in UW50 and UW75 profiles• Floor construction maximum 20 cm• Minimum height of screed 90 mm• Panelling thickness 10–25 mm, sealing level can be adjusted up to
15 mm• Possible tile build-up 6–26 mm• Height-adjustable element• Mounting plate (wood) for surface-mounted and concealed taps,
height- and depth-adjustable• Mounting plate (metal) for surface-mounted taps, height-adjustable• Sealing level for sealing connection that is free of tension• Outlet body with drainage capacity of 0.85 l/s• Trap insert can be removed for cleaning• Drainage connection left, right or front centre• Speak to us about our partnership with wet room floor specialists
Additional NoteFastening material; Bidet outlet bend, HDPE, ø 50 mm; Outlet bend HDPE ø 50 mm for front connection
Excluded: Ready-to-fit set for shower element; Tap connections
Ordering Information
Depth of water seal 50 mm
Drainage capacity with 15 mm head of water 0.5 l/s
Article no. Colour PU1
150.679.21.1 gloss chrome 1
Drainage capacity 0.65 l/s
Depth of water seal 50 mm
Article no. dØ Colour PU1 PU2
150.688.21.1 40 gloss chrome 1 10
115
02 25-
92
43 8
ø 90ø40ø43
47
03-15
85
85
47
8
ø40ø43
Article no. PU1
111.731.00.1 1
50
130
100
9
55
9–20
73
0
24
77
48
11
11
0
100
65
355355
5
45°
245
24
8
16
Product GuideTraps
Product and Installation Guide Washroom & Bathroom 2012 85
Geberit Duofix shower frame, H50, outlet bend d50
Application
• For use within buildings• For drainage of wet room installations• For use with composite seals• For installation in a partial-height Duofix system wall in front of a solid
or drywall construction• For installation in a room-high Duofix system wall• For wooden beams or screeded floors
Characteristics
• Trap can be moved to below finished floor level for installation into wooden floors (see Note)
• Self-supporting• Frame with C profile 40/40 mm• Powder-coated frame, ultramarine blue• Feet can be retracted 5 cm• Rotating foot plate, for installation in UW50 and UW75 profiles• Floor construction maximum 20 cm• Panelling thickness 10–25 mm, sealing level can be adjusted up to
15 mm• Possible tile build-up 6–26 mm• Height-adjustable element• Sealing level for sealing connection that is free of tension• Outlet body with drainage capacity of 0.85 l/s• Trap insert can be removed for cleaning• Drainage connection left, right or front centre• Speak to us about our partnership with wet room floor specialists
Product Details
Additional NoteFastening material; Bidet outlet bend, HDPE, ø 50 mm; Outlet bend HDPE ø 50 mm for front connection
Excluded: Ready-to-fit set for shower element
Ordering Information
NoteContact Geberit to discuss available floor options
Geberit ready-to-fit set for Geberit shower frame, stainless steel
Application
• For use with Geberit Duofix shower frame
Characteristics
• Can be removed for cleaning• Plastic sight frame, mother-of-pearl silver• Brushed stainless steel cover
Additional NoteSight frame; Cover; Hair trap
Ordering Information
Geberit ready-to-fit set for Geberit shower frame, plastic
Application
• For use with Geberit Duofix shower frame
Characteristics
• Can be removed for cleaning• Plastic sight frame, mother-of-pearl silver• Plastic cover
Additional NoteSight frame; Cover; Hair trap
Ordering InformationDepth of water seal 50 mm
Article no. PU1
111.743.00.1 1
50
9
55
41
9–20
77
24
73 48
11
65
355355
5
45°
245
24
8
16
Article no. Colour PU1 PU2
154.330.FW.1 brushed stainless steel 1 21
Article no. Colour PU1 PU2
154.330.21.1 gloss chrome 1 21
154.330.11.1 white alpine 1 21
86 Product and Installation Guide Washroom & Bathroom 2012
Product GuideTraps
Geberit ready-to-fit set for Geberit shower frame, for tiles
Application
• For use with Geberit Duofix shower frame
Characteristics
• Can be removed for cleaning• Plastic sight frame, black• For customers to install a bespoke finish with a thickness of 6 mm -
26 mm
Additional NoteSight frame; Cover; Hair trap
Ordering Information
Geberit drain for floor even shower
Application
• For the drainage of a wet room installation• For use with composite seals• For use within buildings
Characteristics
• Minimal construction height 95 mm and maximum 195 mm• Grating made of stainless steel• Sealing collar, fleece-laminated 500 x 500 mm• Vernier adjustment of grating in height, inclination and off-set possible
via compensating ring• With 40 mm / 1 1/2" waste adaptor
Product Details
Additional NoteTrap; Adaptor; Thin bed top piece; Grating; Rubber collar; Compensating ring; Hair trap; Seal set for use with PVC ; Protection housing; Installation aid
Ordering Information
Geberit grating, screwable
Application
• For Outlet for floor even showers
Characteristics
• Can be locked with screws• Grating and screws made of stainless steel
Product Details
Additional NoteScrews
Ordering Information
Geberit design grating - architectural, squares
Application
• For the drainage of a wet room installation
Characteristics
• Without screw connection
Product Details
Ordering Information
Geberit design grating - architectural, radial
Application
• For the drainage of a wet room installation
Characteristics
• Without screw connection
Product Details
Ordering Information
Article no. PU1 PU2
154.330.00.1 1 21
Drainage capacity min. 0.45 l/s
Drainage capacity max. 0.74 l/s
Depth of water seal 50 mm
Article no. PU1
154.005.00.1 1
1-11
85
145
59
30
10ø40ø43
Product material Stainless steel
Article no. PU1
154.300.00.1 1
Product material Stainless steel
Article no. PU1
154.301.00.1 1
Product material Stainless steel
Article no. PU1
154.302.00.1 1
91
91
05
Product GuideTraps
Product and Installation Guide Washroom & Bathroom 2012 87
Geberit design grating - trendy
Application
• For the drainage of a wet room installation
Characteristics
• Without screw connection
Product Details
Ordering Information
Geberit design grating - classic, natural
Application
• For the drainage of a wet room installation
Characteristics
• Without screw connection
Product Details
Ordering Information
Geberit design grating - puristic, square
Application
• For the drainage of a wet room installation
Characteristics
• Without screw connection
Product Details
Ordering Information
Geberit design grating - puristic, circle
Application
• For the drainage of a wet room installation
Characteristics
• Without screw connection
Product Details
Ordering Information
Geberit shower channel, floor
Application
• For use within buildings• For the drainage of a wet room installation• For use with composite seals• For installing in the room centre
Characteristics
• Minimal construction height 112 mm• Drainpipe and grating frame made of stainless steel• Height-adjustable• Insulation of material noise• Stress elimination to prevent cracking of ceramic plates• Vernier adjustment of grating in height, inclination and off-set possible
via compensating ring• Outlet bend ø 50 mm
Product Details
Additional Note2 odour traps, incl. dip tube; Outlet bend; Drainpipe with the installation flange for thin mortar installation; Frame of grating; Rubber collar; 4 feet, incl. acoustic insulation elements; Protection housing; Adhesive; Fastening material; Excludes ready to fit set
Ordering Information
Product material Stainless steel
Article no. PU1
154.303.00.1 1
Product material Stainless steel
Article no. PU1
154.304.00.1 1
Product material Stainless steel
Article no. PU1
154.305.00.1 1
Product material Stainless steel
Article no. PU1
154.306.00.1 1
Drainage capacity 0.8 l/s
Depth of water seal 50 mm
Article no. lcm
l1cm
l2cm
l3cm
PU1 PU4
154.100.00.1 70 33 13,7 80 1 20
154.101.00.1 80 38 18,7 90 1 20
154.102.00.1 90 43 23,7 100 1 20
154.103.00.1 100 48 28,7 110 1 20
154.130.00.1 110 53 33,7 120 1
154.131.00.1 120 58 38,7 130 1
1514
6
l
l3
l2l1
50
19314
10-15
12-26
112-17652
88 Product and Installation Guide Washroom & Bathroom 2012
Product GuideTraps
Geberit shower channel, wall
Application
• For use within buildings• For the drainage of a wet room installation• For use with composite seals• For wall mounting
Characteristics
• Minimal construction height 112 mm• Drainpipe and grating frame made of stainless steel• Height-adjustable• Insulation of material noise• Stress elimination to prevent cracking of ceramic plates• Vernier adjustment of grating in height, inclination and off-set possible
via compensating ring• Outlet bend ø 50 mm
Product Details
Additional Note2 odour traps, incl. dip tube; Outlet bend; Drainpipe with the installation flange for thin mortar installation; Frame of grating; Rubber collar; 4 feet, incl. acoustic insulation elements; Margin insulation tape for decoupling solid-borne sound; Protection housing; Adhesive; Fastening material; Excludes ready to fit set
Ordering Information
Ready-to-fit set for Geberit shower channel, creative set
Application
• For use with bespoke Uniflex shower channel ready-to-fit set
Characteristics
• Production and care instructions for the manufacture of individual design covers
Additional NoteExtraction tool; 10 damping caps (8.5 mm); 10 damping caps (14.5 mm)
Ordering Information
Ready-to-fit set for Geberit shower channel, brushed stainless steel
Application
• For use with Uniflex shower channel
Characteristics
• Brushed stainless steel
Additional NoteDesign cover; 7 damping caps; Extraction tool
Ordering Information
Ready-to-fit set for Geberit shower channel, for customisation
Application
• For use with Uniflex shower channel
Characteristics
• Lid can be covered with ceramic plates• Requires 154.299.00.1
Additional NoteDesign cover; Extraction tool
Ordering Information
Drainage capacity 0.8 l/s
Depth of water seal 50 mm
Article no. lcm
l1cm
l2cm
l3cm
PU1 PU4
154.105.00.1 70 33 13,7 80 1 20
154.106.00.1 80 38 18,7 90 1 20
154.107.00.1 90 43 23,7 100 1 20
154.108.00.1 100 48 28,7 110 1 20
154.135.00.1 110 53 33,7 120 1
154.136.00.1 120 58 38,7 130 1
Article no. PU1
154.299.00.1 1
135
193
6
3
14
6l
l3
l214l1
50
10-15
12-26
52112-176
Article no. Lcm
PU1 PU4
154.350.00.1 70 1 40
154.351.00.1 80 1 40
154.352.00.1 90 1 26
154.353.00.1 100 1 26
154.354.00.1 110 1
154.355.00.1 120 1
Article no. Lcm
PU1 PU4
154.360.00.1 70 1
154.361.00.1 80 1
154.362.00.1 90 1
154.363.00.1 100 1
154.356.00.1 110 1
154.357.00.1 120 1 20
5
L
Product GuideFill and flush valves for ceramic cisterns
Product and Installation Guide Washroom & Bathroom 2012 89
Fill and flush valves for ceramic cisterns
Geberit filling valve type 380 for exposed cistern
Application
• For filling cisterns• For use with grey water (rainwater), providing a filter system is used• For use with sea water (brass parts must be dezincification-resistant)• For use with clean drinking water• Can be installed in an exposed cistern• Not suitable for use with water with an elevated chlorine content
(swimming pools, etc.)• Not suitable for use with cleaning agents, disinfectants and colouring
agents put into the cistern (contact Geberit if in doubt)
Characteristics
• The filling height can be set by turning the spindle• The valve opens after the water level drops by 20 mm
Product Details
Additional NoteAdaptor; Cone screw fitting; Spacer
Ordering Information
Geberit filling valve type 360 for ceramic cistern, water supply connection at the bottom, 1/2"
Application
• For water supply connection at the bottom• For water supply connection 1/2"
Characteristics
• Height-adjustable
Product Details
Additional NoteSeal; Nut
Ordering Information
Geberit filling valve type 260 for ceramic cistern, half moon button
Application
• For installation in ceramic cisterns
Characteristics
• Overflow pipe height-adjustable• Adjustable flush volume depending on amount of water in cistern• Dual flush actuator with threaded rod for fastening the cistern cover
Product Details
Additional NoteDual flush unit; Lid attachment; Dual flush actuator; Fastening material; Seals
Excluded: Fill valve
Ordering Information
Fill and flush valves for ceramic cisterns
Flow pressure range 0.1–10 bar
Flow rate at 0.5 bar 0.07 l/s
Flow rate at 3 bar 0.19 l/s
Line noise at 3 bar 12 dB(A)
Line noise at 5 bar 18 dB(A)
Pressure shock increase at 6 bar +1 bar
Max. temperature during storage 40 °C
Operating temperature water max. 25 °C
Article no. PU1 PU2 PU4
240.700.00.1 1 10 200
212
3
243
112
61
Operating temperature water max. 25 °C
Flow pressure range 0.1–10 bar
Flow rate at 3 bar 0.16 l/s
Line noise at 3 bar 17 dB(A)
Article no. PU1 PU2 PU4
281.206.00.1 1 25 600
Actuation force 18 N
Max. temperature during storage 40 °C
Operating temperature water max. 25 °C
Flush volume large range 6 / 9 l
Flush volume small range 3–4 l
Article no. PU1 PU2 PU4
261.157.00.1 1 36 288
WLWL
CL
CL
WL
235 - 385
146 - 296
25
92
G
41.5 9 - 15
96
71
185-28
38-45
325-41
min. 9 mmmax. 35 mm
8
125
90 Product and Installation Guide Washroom & Bathroom 2012
Product GuideFill and flush valves for ceramic cisterns
Geberit flush valve type 280 for ceramic cistern, with blue square dual flush
Application
• For installation in ceramic cisterns
Characteristics
• Overflow pipe height-adjustable• Adjustable flush volume depending on amount of water in cistern• Dual flush actuator with threaded rod for fastening the cistern cover
Product Details
Additional NoteDual flush unit; Dual flush actuator with rosette; Fastening material; Rosette ø 50 mm
Ordering Information
Flush volume large range 6 / 9 l
Flush volume small range 3–4 l
Actuation force 18 N
Flow pressure range 0.1–10 bar
Operating temperature water max. 25 °C
Max. temperature during storage 40 °C
Article no. Colour PU1 PU2 PU4
282.350.KD.1 gloss chrome / blue 1 18 108
312-45 293-431
min. 08
max. 15
38-45 12-45
17-27
min. 09
max. 2
16
8
Product GuideGeberit AquaClean
Product and Installation Guide Washroom & Bathroom 2012 91
Geberit AquaClean
Geberit AquaClean 8000plus, complete solution
Application
• For gentle cleaning with water• For mains fed water connection• Complete solution for concealed cistern
Characteristics
• Warm water wash with adjustable temperature• Warm air dryer with adjustable temperature• Washdown WC with surface-coated ceramic appliance• WC seat with soft closing lid• Infra-red user detection• Odour extraction• Shower arm can be set to 7 positions• Oscillating spray (automatic forward and reverse motion of the spray
arm)• Pulsating spray• Adjustable spray intensity• Automatic pre-rinsing of spray nozzle with fresh water and post-
rinsing with Geberit nozzle cleaner• Integrated storage water heater tank with ON/OFF and economy
setting• 4 programmable user profiles• Water supply connection on the left side• Functions and settings adjustable via remote control• Mains fed water connection required (minimum 1 bar)• Mains electric, with 5 amp fuse spur
Product Details
Additional NoteIncludes: Remote control with LC display, wall-mounted holder and batteries, LR03 (AAA); Cover plate for remote control compartment; Active carbon filter; Geberit nozzle cleaner; Water supply connection set for UP300 / UP320 concealed cistern / Monolith; Dryer fan with housing; Acoustic insulation set; Fastening material; Spray shield
Ordering Information
For installation with Geberit Kappa concealed cistern 15 cm (UP200), oder:• Article no. 241.819.00.1For installation with Geberit Sigma concealed cistern 8 cm (UP720), oder:• Article no. 242.413.00.1For installation with concealed cistern for low height furniture oder:• Article no. 242.355.00.1
Note
The Geberit AquaClean range is only available to displaying retailers. Please contact 0800 032 9629 for further information.
Geberit AquaClean
42
18−2043
21−255−9
38−42
25
135
615
215
290
Mains water pressure 1–10 bar
Nominal voltage 230 V AC
Mains frequency 50–60 Hz
Power consumption 1000 W
Power consumption standby / with heating switched on 1 / 9 W
Protection degree IP x4
Protection class I
Fuse spur 5 amp
Length of mains connection cable 70 cm
Air volume flow rate odour extraction unit 10 m3/h
Air volume flow rate dryer 12 m3/h
Flow rate, anal shower 2.1–5.5 l/min
Flow rate, Lady shower 1.4–3 l/min
Dryer temperature factory setting 45 °C
Dryer temperature range 20–45 °C
Water temperature factory setting 37 °C
Water temperature range 10–39 °C
Storage temperature -10 – +60 °C
Operating temperature 10–40 °C
Spray time factory setting 20 s
Number of shower pressure settings, shower spray 7
Flow pressure range 1–10 bar
Storage water heater capacity 2.0 l
Net weight 32 kg
Gross weight 37 kg
Maximum load WC seat / WC lid 150 kg
Article no. Colour PU1 PU4
180.101.11.1 white alpine 1 4
92 Product and Installation Guide Washroom & Bathroom 2012
Product GuideGeberit AquaClean
Geberit AquaClean 8000, complete solution
Application
• For gentle cleaning with water• For mains fed water connection• Complete solution for concealed cistern
Characteristics
• Warm water wash with adjustable temperature• Washdown WC with surface-coated ceramic appliance• Infra-red user detection• WC seat with soft closing lid• Integrated storage water heater tank with ON/OFF and economy
setting• Oscillating spray (automatic forward and reverse motion of the spray
arm)• Adjustable spray intensity• Automatic pre- and post-rinsing of the spray nozzle with fresh water• Water supply connection on the left side• Mains fed water connection required (minimum 1 bar)• Mains electric, with 5 amp fuse spur
Product Details
Additional NoteWater supply connection set for UP300 / UP320 concealed cistern / Monolith; Acoustic insulation set; Fastening material; Spray shield
Ordering Information
For installation with Geberit Kappa concealed cistern 15 cm (UP200), oder:• Article no. 241.819.00.1For installation with Geberit Sigma concealed cistern 8 cm (UP720), oder:• Article no. 242.413.00.1For installation with concealed cistern for low height furniture oder:• Article no. 242.355.00.1
Note
The Geberit AquaClean range is only available to displaying retailers. Please contact 0800 032 9629 for further information.
Mains water pressure 1–10 bar
Nominal voltage 230 V AC
Mains frequency 50–60 Hz
Power consumption 1000 W
Power consumption standby / with heating switched on 1 / 9 W
Protection degree IP x4
Protection class I
Fuse spur 5 amp
Length of mains connection cable 70 cm
Flow rate, anal shower 2.1–5.5 l/min
Water temperature factory setting 37 °C
Storage temperature -10 – +60 °C
Operating temperature 10–40 °C
Spray time factory setting 20 s
Number of shower pressure settings, shower spray 7
Flow pressure range 1–10 bar
Storage water heater capacity 2.0 l
Net weight 27.5 kg
Gross weight 34 kg
Maximum load WC seat / WC lid 150 kg
42
18−2043
21−255−9
38−42
25
135
615
215
290
Article no. Colour PU1 PU4
146.181.11.1 white alpine 1 4
Product GuideGeberit AquaClean
Product and Installation Guide Washroom & Bathroom 2012 93
Geberit AquaClean 5000plus, enhancement solution
Application
• For gentle cleaning with water• For subsequent mounting on a WC ceramic (replaces WC seat and
lid)• For mains fed water connection
Characteristics
• Warm water wash• WC seat with soft closing lid• Infra-red user detection• Odour extraction• Shower arm can be set to 7 positions• Oscillating spray (automatic forward and reverse motion of the spray
arm)• Pulsating spray• Adjustable spray intensity• Integrated storage water heater tank with ON/OFF and economy
setting• Warm air dryer with adjustable temperature• Mains connection cable can be cut to length• Mains power connection at rear with hidden pipe-laying option to the
left or right• Functions and settings adjustable via remote control• Automatic pre- and post-rinsing of the spray nozzle with fresh water• Water supply connection on the left side• Mains fed water connection required (minimum 1 bar)• Mains electric, with 5 amp fuse spur
Product Details
Additional NoteWater supply connection set for UP300 / UP320 concealed cistern / Monolith; Includes: Remote control with LC display, wall-mounted holder and batteries, LR03 (AAA); Active carbon filter; Water supply connection set for left side connection; Spray nozzle (replacement); Fastening material; Compensation pad for toilet seat; Spray shield
Ordering Information
For installation with Geberit Kappa concealed cistern 15 cm (UP200), order:• Article no. 240.634.00.1 for H82• Article no. 240.635.00.1 for H98For installation with the Geberit Sigma concealed cistern 12 cm (UP320) and Monolith sanitary module for Geberit AquaClean, order:• Article no. 249.801.00.1For installation with the Geberit Sigma concealed cistern 8 cm (UP720), order:• Article no. 242.413.00.1 and 249.801.00.1For installation with the concealed cistern for low height furniture order:• Article no. 242.553.00.1
Note
The Geberit AquaClean range is only available to displaying retailers. Please contact 0800 032 9629 for further information.
185
485
35
3030 22
55
155
35
15
R3/825
11
29
13-165
507
295
195
385
225
54-8
Mains water pressure 1–10 bar
Nominal voltage 230 V AC
Mains frequency 50–60 Hz
Power consumption 850 W
Power consumption standby / with heating switched on 0.9 / 6.7 W
Protection degree IP x4
Protection class I
Fuse spur 5 amp
Length of mains connection cable 2 m
Air volume flow rate odour extraction unit 4.4 m3/h
Air volume flow rate dryer 9.1 m3/h
Flow rate, anal shower 1.7–3 l/min
Flow rate, Lady shower 0.6–2 l/min
Dryer temperature factory setting 45 °C
Dryer temperature range 20–45 °C
Water temperature factory setting 37 °C
Water temperature range 10–39 °C
Storage temperature -10 – +60 °C
Operating temperature 10–40 °C
Spray time factory setting 20 s
Number of shower pressure settings, shower spray 7
Flow pressure range 1–10 bar
Storage water heater capacity 1.65 l
Net weight 6.3 kg
Gross weight 9.2 kg
Maximum load WC seat / WC lid 150 kg
Article no. Colour PU1
146.114.11.1 white alpine 1
94 Product and Installation Guide Washroom & Bathroom 2012
Product GuideGeberit AquaClean
Geberit AquaClean 5000, enhancement solution
Application
• For gentle cleaning with water• For subsequent mounting on a WC ceramic (replaces WC seat and
lid)• For mains fed water connection
Characteristics
• Warm water wash with adjustable temperature• WC seat with soft closing lid• Infra-red user detection• Odour extraction• Spray arm with nozzle for anal area, can be extended• Oscillating spray (automatic forward and reverse motion of the spray
arm)• Adjustable spray intensity• Integrated storage water heater tank with ON/OFF setting• Mains power connection at rear with hidden pipe-laying option to the
left or right• Mains connection cable can be cut to length• Automatic pre- and post-rinsing of the spray nozzle with fresh water• Water supply connection on the left side• Mains fed water connection required (minimum 1 bar)• Mains electric, with 5 amp fuse spur
Product Details
Additional NoteWater supply connection set for UP300 / UP320 concealed cistern / Monolith; Includes: Active carbon filter; Water supply connection set for left side connection; Spray nozzle (replacement); Fastening material; Compensation pad for toilet seat; Spray shield
Ordering Information
For installation with Geberit Kappa concealed cistern 15 cm (UP200), order:• Article no. 240.634.00.1 for H82• Article no. 240.635.00.1 for H98For installation with the Geberit Sigma concealed cistern 12 cm (UP320) and Monolith sanitary module for Geberit AquaClean, order:• Article no. 249.801.00.1For installation with the Geberit Sigma concealed cistern 8 cm (UP720), order:• Article no. 242.413.00.1 and 249.801.00.1For installation with the concealed cistern for low height furniture order:• Article no. 242.553.00.1
Note
The Geberit AquaClean range is only available to displaying retailers. Please contact 0800 032 9629 for further information.
Mains water pressure 1–10 bar
Nominal voltage 230 V AC
Mains frequency 50–60 Hz
Power consumption 850 W
Power consumption standby / with heating switched on 0.9 / 6.7 W
Protection degree IP x4
Protection class I
Fuse spur 5 amp
Length of mains connection cable 2 m
Air volume flow rate odour extraction unit 4.4 m3/h
Flow rate, anal shower 1.7–3 l/min
Water temperature factory setting 37 °C
Storage temperature -10 – +60 °C
Operating temperature 10–40 °C
Spray time factory setting 20 s
Number of shower pressure settings, shower spray 7
Flow pressure range 1–10 bar
Storage water heater capacity 1.65 l
Net weight 6.1 kg
185
485
35
3030
22
55
155
35
15
R3/825
11
29
13-165
507
295
195
385
225
54-8
Gross weight 9 kg
Maximum load WC seat / WC lid 150 kg
Article no. Colour PU1
146.122.11.1 white alpine 1
Product GuideGeberit AquaClean
Product and Installation Guide Washroom & Bathroom 2012 95
Geberit AquaClean 4000, enhancement solution
Application
• For gentle cleaning with water• For subsequent mounting on a WC ceramic (replaces WC seat and
lid)• For mains fed water connection
Characteristics
• Warm water wash• WC seat with soft closing lid• Spray intensity can be set to 5 different levels• Mains power connection at rear with hidden pipe-laying option to the
left or right• Automatic pre- and post-rinsing of the spray nozzle with fresh water• Integrated storage water heater tank with ON/OFF setting• Water supply connection on the left side• Mains fed water connection required (minimum 1 bar)• Mains electric, with 5 amp fuse spur
Product Details
Ordering Information
For installation with Geberit Kappa concealed cistern 15 cm (UP200), order:• Article no. 240.634.00.1 for H82• Article no. 240.635.00.1 for H98For installation with the Geberit Sigma concealed cistern 12 cm (UP320) and Monolith sanitary module for Geberit AquaClean, order:• Article no. 249.801.00.1For installation with the Geberit Sigma concealed cistern 8 cm (UP720), order:• Article no. 242.413.00.1 and 249.801.00.1For installation with the concealed cistern for low height furniture order:• Article no. 242.553.00.1
Note
The Geberit AquaClean range is only available to displaying retailers. Please contact 0800 032 9629 for further information.
Mains water pressure 1–10 bar
Nominal voltage 230 V AC
Mains frequency 50–60 Hz
Power consumption 800 W
Power consumption standby / with heating switched on 0.9 / 5.8 W
Protection degree IP x4
Protection class I
Fuse spur 5 amp
Length of mains connection cable 2 m
Flow rate, anal shower 0.9–1.6 l/min
Water temperature factory setting 37 °C
Operating temperature 10–40 °C
Storage temperature -10 – +60 °C
Spray time factory setting 20 s
Number of shower pressure settings, shower spray 5
Flow pressure range 0.5–10 bar
Storage water heater capacity 0.9 l
Net weight 4.1 kg
Gross weight 7.5 kg
Maximum load WC seat / WC lid 150 kg
40
15
R1/2 155
3030
17
3
55
4
55
145
15
13-165
10
2855-9
225
5
505
14
26
Article no. Colour PU1
146.132.11.1 white alpine 1
96 Product and Installation Guide Washroom & Bathroom 2012
Product GuideGeberit AquaClean
Geberit AquaClean design cover for complete solution, for 8000plus and 8000, laminate
Application
• For retrofitting Geberit AquaClean complete solutions to a Geberit concealed cistern, without conduit pipe
• For use with Geberit Sigma concealed cistern 12 cm (UP320)• For use on fully tiled surface
Characteristics
• Suitable for distance of 65-70 cm, measured from the middle of the actuator plate to the middle of the ceramic fastening
• Retrofit set can be mounted and removed without damaging the tile surface
• Design Panel with integrated actuation for dual flush• Surface even actuation• Hidden water supply connection• Cable for power connection can be housed in Design Panel• High pressure laminate
Additional NoteDesign Panel; Reinforced braided hose; Y-branch; 4 actuator rods; T-piece; Fastening material
Ordering Information
Geberit AquaClean design cover for enhancement solution, for 8000plus and 8000, glass
Application
• For retrofitting Geberit AquaClean complete solutions to a Geberit concealed cistern, without conduit pipe
• For use with Geberit Sigma concealed cistern 12 cm (UP320)• For use on fully tiled surface
Characteristics
• Suitable for distance of 65-70 cm, measured from the middle of the actuator plate to the middle of the ceramic fastening
• Retrofit set can be mounted and removed without damaging the tile surface
• Design Panel with integrated actuation for dual flush• Surface even actuation• Hidden water supply connection• Cable for power connection can be housed in Design Panel
Additional NoteDesign Panel; Reinforced braided hose; Y-branch; 4 actuator rods; T-piece; Fastening material
Ordering Information
Note
The Geberit AquaClean range is only available to displaying retailers. Please contact 0800 032 9629 for further information.
Article no. Colour PU1
115.323.11.1 white 1
107
10
162
475
65-70
48
58
106
95
18
15
Article no. Colour PU1 PU4
115.325.SG.1 black 1 10
115.325.SF.1 white 1 10
107
10
162
475
65–70
48
58
106
95
18
2
Product GuideGeberit AquaClean
Product and Installation Guide Washroom & Bathroom 2012 97
Geberit AquaClean design cover for enhancement solution, for 5000plus, 5000 and 4000, laminate
Application
• For retrofitting Geberit AquaClean complete solutions to a Geberit concealed cistern, without conduit pipe
• For use with Geberit Sigma concealed cistern 12 cm (UP320)• For use on fully tiled surface
Characteristics
• Retrofit set can be mounted and removed without damaging the tile surface
• Design Panel with integrated actuation for dual flush• Surface even actuation• Water supply connection hidden in design panel• High pressure laminate
Additional NoteDesign Panel; Reinforced braided hose; Y-branch; 4 actuator rods; T-piece; Fastening material
Ordering Information
Geberit AquaClean design cover for enhancement solution, for 5000plus, 5000 and 4000, glass
Application
• For retrofitting Geberit AquaClean complete solutions to a Geberit concealed cistern, without conduit pipe
• For use with Geberit Sigma concealed cistern 12 cm (UP320)• For use on fully tiled surface
Characteristics
• Retrofit set can be mounted and removed without damaging the tile surface
• Design Panel with integrated actuation for dual flush• Surface even actuation• Water supply connection hidden in design panel
Additional NoteDesign Panel; Reinforced braided hose; Y-branch; 4 actuator rods; T-piece; Fastening material
Ordering Information
Reinforced braided hose for Geberit Kappa concealed cistern 15 cm (UP200), for Geberit AquaClean 8000plus and 8000
Application
• For Geberit Kappa concealed cistern 15 cm (UP200) with top/front actuation
• For connecting Geberit AquaClean
Characteristics
• Special production to meet the standard BS 6920
Ordering Information
Geberit water supply connection for Geberit Sigma concealed cistern 8 cm (UP720), for Geberit AquaClean
Application
• For use with Geberit Sigma concealed cistern 8 cm (UP720), front actuation
• For connecting Geberit AquaClean• Also requires 249.801.00.1
Ordering Information
Geberit AquaClean 5000 & 5000plus water supply connection set, standard
Application
• For use with Geberit AquaClean 5000• For use with Geberit AquaClean 5000plus
Ordering Information
Note
The Geberit AquaClean range is only available to displaying retailers. Please contact 0800 032 9629 for further information.
Article no. Colour PU1
115.322.11.1 white 1
Article no. Colour PU1 PU4
115.324.SG.1 black 1 10
115.324.SF.1 white 1 10
107
162
38
59
95
495
15
107
162
38
59
95
495
2
Geberit AquaClean connection sets
Article no. PU1
241.819.00.1 1
Article no. PU1
242.413.00.1 1
Article no. PU1 PU2
242.185.00.1 1 5
98 Product and Installation Guide Washroom & Bathroom 2012
Product GuideGeberit AquaClean
Geberit water supply connection for Geberit Sigma concealed cistern 12 cm (UP320), for Geberit AquaClean enhancement solution
Application
• For connecting Geberit AquaClean enhancement solutions to concealed cistern
• For concealed cisterns with pre-mounted conduit pipe for the water supply connection
• For connection to Geberit Kappa concealed cistern 15 cm (UP200); use separate water supply connection set
• Additional part 242.413.00.1 required for use with Geberit Sigma concealed cistern 8 cm (UP720)
Additional NoteAngle stop valve R 1/2"; 2 metal-reinforced hoses R 3/8"; Y-branch; Connection material
Ordering Information
Water supply connection set for Geberit AquaClean enhancement solution to Geberit Kappa concealed cistern 15 cm (UP200), H82
Application
• For connecting Geberit AquaClean enhancement solutions to concealed cistern
• For Geberit Kappa concealed cistern 15 cm (UP200) with top/front actuation
• For use with installation elements with construction height 82 cm
Additional Note3 metal-reinforced hoses; Angle stop valve R 1/2"; Connection material
Ordering Information
Water supply connection set for Geberit AquaClean enhancement solution to Geberit Kappa concealed cistern 15 cm (UP200), H98
Application
• For connecting Geberit AquaClean enhancement solutions to concealed cistern
• For Geberit Kappa concealed cistern 15 cm (UP200) with top/front actuation
• For installation elements with construction height 98 cm
Additional Note3 metal-reinforced hoses; Angle stop valve R 1/2"; Connection material
Ordering Information
Geberit water supply connection set, conventional
Application
• For use with Balena 8000• For use with Geberit AquaClean 8000plus• For use with Geberit AquaClean 8000• For conventional water supply connection• For low height furniture
Additional NoteReinforced braided hose R 1/2" x 3/8"; Angle stop valve R 1/2"; Connection material
Ordering Information
Note
The Geberit AquaClean range is only available to displaying retailers. Please contact 0800 032 9629 for further information.
Article no. PU1
249.801.00.1 1
Article no. PU1
240.634.00.1 1
Article no. PU1
240.635.00.1 1
Article no. PU1 PU2
242.355.00.1 1 10
Product GuideGeberit AquaClean
Product and Installation Guide Washroom & Bathroom 2012 99
Geberit AquaClean 8000plus nozzle cleaner
Application
• For use with Geberit AquaClean 8000plus
Characteristics
• For approx. 750 uses (400 ml)• Dermatologically tested
Ordering Information
Geberit AquaClean 8000plus active carbon filter and nozzle cleaner 1 pcs
Application
• For use with Geberit AquaClean 8000plus
Ordering Information
Geberit AquaClean 8000plus active carbon filter and nozzle cleaner 2 pcs
Application
• For use with Geberit AquaClean 8000plus
Ordering Information
Geberit AquaClean 8000plus active carbon filter
Application
• For use with Geberit AquaClean 8000plus
Ordering Information
Geberit AquaClean cleaning agent
Application
• For cleaning Geberit AquaClean devices
Characteristics
• Content 500 ml• Can be used immediately and undiluted• Environmentally friendly
Ordering Information
Geberit AquaClean cleaning agent with cloth
Application
• For cleaning Geberit AquaClean devices
Additional NoteGeberit AquaClean cleaning agent; Cleaning cloth
Ordering Information
Set of Geberit AquaClean 5000plus active carbon filters
Application
• For use with Geberit AquaClean 5000• For use with Geberit AquaClean 5000plus
Additional Note2 piece
Ordering Information
Note
The Geberit AquaClean range is only available to displaying retailers. Please contact 0800 032 9629 for further information.
Geberit AquaClean consumables
Article no. PU1 PU2
242.545.00.1 1 12
Article no. PU1 PU4
240.625.00.1 1 144
Article no. PU1 PU4
240.626.00.1 1 144
Article no. PU1 PU2
250.022.00.1 1 10
Article no. PU1 PU2
242.546.00.1 1 10
Article no. PU1 PU2
242.547.00.1 1 10
Article no. PU1 PU2
240.116.00.1 1 30
100 Product and Installation Guide Washroom & Bathroom 2012
Product GuideGeberit AquaClean
Geberit AquaClean 8000plus set shower and dryer nozzle
Application
• For use with Geberit AquaClean 8000plus
Ordering Information
Geberit AquaClean 8000plus remote control wall holder
Application
• For use with Geberit AquaClean 8000plus
Ordering Information
Geberit AquaClean 5000plus and 8000plus battery set for remote control
Application
• For use with Geberit AquaClean 8000plus• For use with Geberit AquaClean 5000plus
Additional NoteSet of 3
Ordering Information
Geberit AquaClean 8000plus remote control
Application
• For use with Geberit AquaClean 8000plus
Product Details
Ordering Information
Geberit AquaClean 8000 shower nozzle
Application
• For use with Geberit AquaClean 8000
Ordering Information
Geberit AquaClean 8000plus & 8000 seat and lid
Application
• For use with Geberit AquaClean 8000plus• For use with Geberit AquaClean 8000
Ordering Information
Note
The Geberit AquaClean range is only available to displaying retailers. Please contact 0800 032 9629 for further information.
Geberit AquaClean spare parts
Article no. PU1 PU2
242.394.00.1 1 10
Article no. PU1
250.032.00.1 1
Article no. PU1
147.008.00.1 1
Radio frequency 2.4 GHz
Article no. PU1
250.043.00.1 1
Article no. PU1
250.071.00.1 1
Article no. Colour PU1 PU2
250.034.11.1 white alpine 1 5
Product GuideGeberit AquaClean
Product and Installation Guide Washroom & Bathroom 2012 101
Geberit AquaClean 8000plus & 8000 lid
Application
• For use with Geberit AquaClean 8000plus• For use with Geberit AquaClean 8000
Ordering Information
Geberit AquaClean 8000plus & 8000 seat
Application
• For use with Geberit AquaClean 8000plus• For use with Geberit AquaClean 8000
Ordering Information
Geberit AquaClean 8000plus & 8000 casing
Application
• For use with Geberit AquaClean 8000plus• For use with Geberit AquaClean 8000
Ordering Information
Geberit AquaClean 8000plus & 8000 for WC seat, white, left
Application
• For use with Geberit AquaClean 8000plus• For use with Geberit AquaClean 8000
Ordering Information
Geberit AquaClean 8000plus & 8000 for WC seat, white, right
Application
• For use with Geberit AquaClean 8000plus• For use with Geberit AquaClean 8000
Ordering Information
Geberit AquaClean 8000plus & 8000 cover - right
Application
• For use with Geberit AquaClean 8000plus• For use with Geberit AquaClean 8000
Ordering Information
Geberit AquaClean 8000plus & 8000 O-ring for shower arm
Application
• For use with Geberit AquaClean 8000plus
Ordering Information
Note
The Geberit AquaClean range is only available to displaying retailers. Please contact 0800 032 9629 for further information.
Article no. Colour PU1
250.067.11.1 white alpine 1
Article no. Colour PU1
250.066.11.1 white alpine 1
Article no. Colour PU1 PU4
250.029.11.1 white alpine 1 6
Article no. PU1 PU2
250.069.00.1 1 10
Article no. PU1
250.068.00.1 1
Article no. PU1
250.026.00.1 1
Article no. PU1
240.665.00.1 1
102 Product and Installation Guide Washroom & Bathroom 2012
Product GuideGeberit AquaClean
Geberit AquaClean 8000plus & 8000 screw for casing
Application
• For use with Geberit AquaClean 8000plus• For use with Geberit AquaClean 8000
Ordering Information
Geberit AquaClean 8000plus & 8000anti-slip strip set
Application
• For use with Geberit AquaClean 8000plus• For use with Geberit AquaClean 8000
Ordering Information
Geberit AquaClean 8000plus & 8000 maintenance flap
Application
• For use with Geberit AquaClean 8000plus• For use with Geberit AquaClean 8000
Ordering Information
Geberit AquaClean 8000plus & 8000 acoustic insulation set
Application
• For use with Geberit AquaClean 8000plus• For use with Geberit AquaClean 8000
Additional NoteSound insulation mat; 2 sleeves
Ordering Information
Geberit AquaClean 5000plus remote control
Application
• For use with Geberit AquaClean 5000plus
Ordering Information
Geberit AquaClean 5000plus dryer flap
Application
• For use with Geberit AquaClean 5000plus
Ordering Information
Note
The Geberit AquaClean range is only available to displaying retailers. Please contact 0800 032 9629 for further information.
Article no. PU1
250.079.11.1 1
Article no. PU1
250.037.11.1 1
Article no. Colour PU1
250.030.11.1 White alpine 1
Article no. PU1
250.027.00.1 1
Article no. PU1
242.169.11.1 1
Article no. PU1 PU2
242.184.11.1 1 20
Product GuideGeberit AquaClean
Product and Installation Guide Washroom & Bathroom 2012 103
Geberit AquaClean 5000plus wall mounted holder for remote control
Application
• For use with Geberit AquaClean 5000plus
Ordering Information
Geberit AquaClean 5000 & 5000plus WC seat lid
Application
• For use with Geberit AquaClean 5000• For use with Geberit AquaClean 5000plus
Ordering Information
Geberit AquaClean 5000 & 5000plus WC seat
Application
• For use with Geberit AquaClean 5000• For use with Geberit AquaClean 5000plus
Ordering Information
Geberit AquaClean 5000 & 5000plus filter
Application
• For use with Geberit AquaClean 5000• For use with Geberit AquaClean 5000plus
Ordering Information
Geberit AquaClean 5000 & 5000plus adaptor plate
Application• For use with Geberit AquaClean 5000• For use with Geberit AquaClean 5000plusCharacteristics• Dowel with clamping range 12.5-21.5 cm and 26.5-27.5 cm• For ceramics with top fixing or outside range 13-16.5 cmAdditional NoteConnection material; Allen key; 4 dowelsOrdering Information
Geberit AquaClean 5000 & 5000plus spray nozzle
Application• For use with Geberit AquaClean 5000• For use with Geberit AquaClean 5000plusOrdering Information
Geberit AquaClean 5000 & 5000plus cover filter compartment
Application
• For use with Geberit AquaClean 5000• For use with Geberit AquaClean 5000plus
Ordering Information
Geberit AquaClean 5000 & 5000plus cover for electrical connection
Application• For use with Geberit AquaClean 5000• For use with Geberit AquaClean 5000plusOrdering Information
Note
The Geberit AquaClean range is only available to displaying retailers. Please contact 0800 032 9629 for further information.
Article no. PU1
240.057.11.1 1
Article no. PU1
242.181.11.1 1
Article no. Colour PU1
242.179.11.1white alpine, standard finish
1
242.180.11.1 white alpine, coated finish 1
Article no. PU1 PU2
242.187.00.1 1 10
Article no. PU1
240.495.00.1 1
Article no. PU1
240.226.11.1 1
Article no. PU1 PU2
242.182.11.1 1 12
Article no. PU1 PU2
242.183.11.1 1 15
104 Product and Installation Guide Washroom & Bathroom 2012
Product GuideGeberit AquaClean
Geberit AquaClean 5000 & 5000plus hinge set
Application
• For use with Geberit AquaClean 5000• For use with Geberit AquaClean 5000plus
Ordering Information
Geberit AquaClean 5000 & 5000plus compensation pad set raised
Application
• For use with Geberit AquaClean 5000• For use with Geberit AquaClean 5000plus
Additional NoteSet of 4
Ordering Information
Geberit AquaClean 5000 & 5000plus compensation pad set
Application
• For use with Geberit AquaClean 5000• For use with Geberit AquaClean 5000plus
Additional NoteSet of 4
Ordering Information
Geberit AquaClean 5000 & 5000plus pad set for WC lid
Application
• For use with Geberit AquaClean 5000
Ordering Information
Geberit AquaClean 4000 WC seat
Application
• For use with Geberit AquaClean 4000Ordering Information
Geberit AquaClean 4000 WC seat lid
Application
• For use with Geberit AquaClean 4000Ordering Information
Geberit AquaClean 4000 filter
Application
• For use with Geberit AquaClean 4000Ordering Information
Geberit AquaClean 4000 securing clip to WC lid
Application
• For use with Geberit AquaClean 4000Ordering Information
Geberit AquaClean 4000 pad set for WC lid
Application
• For use with Geberit AquaClean 4000Ordering Information
Note
The Geberit AquaClean range is only available to displaying retailers. Please contact 0800 032 9629 for further information.
Article no. PU1
242.186.11.1 1
Article no. PU1
241.517.CG.1 1
Article no. PU1
241.516.CG.1 1
Article no. PU1 PU2
242.286.CG.1 1 50
Article no. Colour PU1
242.170.11.1 white alpine, standard finish 1
242.171.11.1 white alpine, coated finish 1
Article no. Colour PU1 PU2
242.172.11.1 white alpine 1 7
Article no. PU1
147.235.00.1 1
Article no. Colour PU1
242.178.11.1 white alpine 1
Article no. PU1
147.231.00.1 1
Product GuideGeberit AquaClean
Product and Installation Guide Washroom & Bathroom 2012 105
Geberit AquaClean 4000 pin set for WC seat/lid
Application
• For use with Geberit AquaClean 4000
Ordering Information
Geberit AquaClean 4000 O-ring set for spray arm
Application
• For use with Geberit AquaClean 4000
Ordering Information
Geberit AquaClean 4000 compensation pad set raised
Application
• For use with Geberit AquaClean 4000
Ordering Information
Geberit AquaClean 4000 compensation pad set
Application
• For use with Geberit AquaClean 4000
Ordering Information
Geberit AquaClean 4000 spray nozzle with 3 holes
Application
• For use with Geberit AquaClean 4000
Ordering Information
Geberit AquaClean 4000 spray nozzle with 5 holes
Application
• For use with Geberit AquaClean 4000
Ordering Information
Geberit AquaClean 4000, 5000 & 5000plus fastening set
Ordering Information
Geberit AquaClean waterstream cover for Geberit AquaClean 4000
Application
• For use with Geberit AquaClean 4000
Ordering Information
Spray shield for Geberit AquaClean 8000plus, 8000, 5000plus and 5000
Application
• For use with Geberit AquaClean 5000• For use with Geberit AquaClean 5000plus• For use with Geberit AquaClean 8000• For use with Geberit AquaClean 8000plus
Ordering Information
Note
The Geberit AquaClean range is only available to displaying retailers. Please contact 0800 032 9629 for further information.
Article no. PU1
242.175.00.1 1
Article no. PU1
242.176.00.1 1
Article no. PU1
242.174.00.1 1
Article no. PU1
242.173.00.1 1
Article no. PU1 PU2
242.377.00.1 1 100
Article no. PU1 PU2
242.376.00.1 1 100
Article no. PU1
849.825.00.1 1
Article no. Colour PU1
813.224.15.0 Glass clearly 1
Article no. PU1 Price£
242.676.00.1 1 7.85
106 Product and Installation Guide Washroom & Bathroom 2012
SparesSpares Duofix WC frames
Buy spares direct on 01789 842127
SparesDuofix WC frames
111.383.00.5 Geberit Duofix frame for wall-hung WC, H112, with Sigma cistern 12 cm (UP320)111.384.00.5 Geberit Duofix frame for wall-hung WC, H112, with Sigma cistern 12 cm (UP320), without fixings and drainage
Ordering Information
Duofix WC frames
Pos. Article no. Description
1 241.869.00.1 Mounting accessories
2 241.824.00.1 Inner cover
3 241.826.00.1 Protection housing
4 362.771.00.1 Seal for flush pipe
5 362.796.92.1 Protection cover for flush pipe
6 240.189.00.1 Threaded rod (pr) M12, 25 cm length
7 152.426.46.1 WC Connection Set
7.1 217.713.46.1 chrome caps and washers
7.2 119.668.00.1 flush pipe seal
7.3 152.424.00.1 rubber collar
8 366.061.16.1 90 mm HDPE 90 Degree bend
8.1 387.282.00.1 Collar for outlet bend
9 366.820.92.1 Protection cover
10 367.928.16.1 90/110 mm Adaptor
11 242.012.00.1 Complete pipe bracket
11.1 242.017.00.1 Pipe bracket clip
12 242.010.00.1 Conduit pipe for shower toilet water supply
13 111.892.00.1 Hexagonal self tapping screws
14 240.269.00.1Water supply connection R 1/2" with integrated angle stop valve
14.1 240.298.00.1 Spindle for isolation valve
14.2 240.347.00.1 Hand wheel
14.3 241.857.00.1 Nut for isolation valve
15 241.982.00.1 Stainless steel connection hose
15.1 240.922.00.1 EPDM O Ring 7.5 x 1.5 mm / 19 x 2 mm
16 240.923.00.1 Connection clip for fill valve
17 240.705.00.1 Side fill valve for Duofix
17.1 240.771.00.1 Diaphragm for side fill valve
18 241.858.00.1 Complete flush valve with basket
19 240.622.00.1 Complete flush valve
19.1 241.167.00.1 Clip set for flush valves
19.2 816.418.00.1 Flush valve seal
20 241.859.00.1 Basket for flush valve
20.1 241.868.00.1 Seal for basket
21 241.829.00.1 Cradle assembly for push rods
816.418
10
4
2
1
3
5
98.1
12
11.1
14.3
14.114.2
7.2
15
15.1
2113
1617
17.1
19.2
18
19
19.1
20
20.113
14
11
87.1
7
7.3
6
SparesDuofix WC frames Spares
Product and Installation Guide Washroom & Bathroom 2012 107
Buy spares direct on 01789 842127
111.242.00.1 Geberit Duofix frame for wall-hung WC, H82, with Kappa cistern 15 cm (UP200) 111.292.00.1 Geberit Duofix frame for wall-hung WC, H98, with Kappa cistern 15 cm (UP200)
Ordering Information
Pos. Article no. Description
1 240.206.00.1 Inner cover
2 240.172.00.1 Protection housing
3 240.533.00.1 Cradle assembly for push rods
4 240.269.00.1 Servicing (stop) valve complete
4.1 240.347.00.1 Knob for isolation valve
4.2 240.298.00.1 Spindle for isolation valve
4.3 240.623.00.1 Nut for isolation valve
5 240.705.00.1 Side fill valve
5.1 240.771.00.1 Diaphragm for side fill valve
6 240.846.00.1 Stainless steel connection hose
6.1 240.922.00.1 EPDM O Ring 7.5 x 1.5mm / 19 x 2mm
7 240.637.00.1 Complete flush valve
8 240.638.00.1 Flush valve
8.1 816.418.00.1 Flush valve seal
9 240.928.00.1 Basket for flush valve
9.1 240.282.00.1 Seal for basket
10 362.771.00.1 Seal for flush pipe
11 362.796.92.1 Protection cover for flush pipe
12 240.189.00.1 Threaded rod (pr)
13 240.972.00.1 Complete pipe bracket
13.1 240.417.00.1 Pipe bracket clip
14 152.426.46.1 WC connection set
14.1 217.713.46.1 Chrome caps & washers
14.2 119.668.00.1 Flush pipe seal
14.3 152.424.00.1 Rubber collar
15 366.061.16.1 90 mm HDPE 90 degree bend
15.1 387.282.00.1 90 mm seal
16 366.820.92.1 Protection cover
17 367.928.16.1 90/110 mm Adaptor
18 111.892.00.1 Hexagonal self tapping screws
55.1
4
4.34.1 4.2
1
2
3
11
12
12
17
9
8
7
8.1
9.1
15
16
15.1
18
18
13
13.1
10
6
6.1
14
14.3
14.2
14.1
108 Product and Installation Guide Washroom & Bathroom 2012
SparesSpares Concealed cisterns
Buy spares direct on 01789 842127
Concealed cisterns
109.309.00.5 Geberit Sigma concealed cistern 12 cm, (UP320)
Ordering Information
Concealed cisterns
Pos. Article no. Description
1 240.923.00.1 Connection clip for fill valve
2 240.705.00.1 Side fill valve for Duofix
2.1 240.771.00.1 Diaphragm for side fill valve
3 241.858.00.1 Complete flush valve with basket
4 240.622.00.1 Complete flush valve
4.1 241.167.00.1 Clip set for flush valves
4.2 816.418.00.1 Flush valve seal
5 241.859.00.1 Basket for flush valve
5.1 241.868.00.1 Seal for basket
6 241.826.00.1 Protection housing
7 241.824.00.1 Inner cover
8 241.829.00.1 Cradle assembly for push rods
9 241.378.00.1 Concealed flush pipe fixing set
10 119.652.16.1 Concealed flush pipe
10.1 362.771.00.1 Seal for flush pipe ø 45 mm
10.2 362.796.92.1 Protection cover for flush pipe
11 892.975.00.1 O Ring seal
12 889.711.00.1 Fixing slider
13 465.027.00.1 Wall brackets and screws (pair)
14 241.982.00.1 Stainless steel connection hose
15 240.269.00.1Water supply connection R 1/2“ with integrated angle stop valve
15.1 240.347.00.1 Hand wheel
15.2 240.298.00.1 Spindle for isolation valve
15.3 241.857.00.1 Nut for isolation valve
816.418
11
10.210.1
15
15.115.2
15.3
1 2
8
10
7
2.1
4.2
3
4
4.1
5
5.1
14
6
9
13
12
13
SparesConcealed cisterns Spares
Product and Installation Guide Washroom & Bathroom 2012 109
Buy spares direct on 01789 842127
109.200.00.1 Geberit Kappa concealed cistern 15 cm (UP200)
Ordering Information
123.137.11.1 Geberit exposed cistern type 123, low-mounted, 9 l, water supply connection left/right, with pneumatic lifter
Ordering Information
Pos. Article no. Description
1 240.206.00.1 Inner cover
2 240.172.00.1 Protection housing
3 240.533.00.1 Cradle assembly for push rods
4 240.269.00.1 Servicing (stop) valve complete
4.1 240.347.00.1 Knob for isolation valve
4.2 240.298.00.1 Spindle for isolation valve
4.3 240.623.00.1 Nut for isolation valve
5 240.705.00.1 Side fill valve
5.1 240.771.00.1 Diaphragm for side fill valve
6 240.846.00.1 Stainless steel connection hose
6.1 240.922.00.1 EPDM O Ring 7.5 x 1.5mm / 19 x 2mm
7 240.637.00.1 Complete flush valve
8 240.638.00.1 Flush valve
8.1 241.167.00.1 Clip set for flush valve
8.2 816.418.00.1 Flush valve seal
9 240.928.00.1 Basket for flush valve
9.1 240.282.00.1 Seal for basket
10 362.771.00.1 Seal for flush pipe
11 362.796.92.1 Protection cover for flush pipe
12 241.378.00.1 Concealed flush pipe fixing set
13 152.434.06.1 WC flush pipe connector and collar
13.1 119.668.00.1 Flush pipe seal
Pos. Article no. Description
1 890.240.11.1 Cover
2 240.700.00.1 Side fill valve
2.1 240.771.00.1 Diaphragm for side fill valve
3 240.573.00.1 Pneumatic actuation unit single flush
4 240.576.00.1 Flush valve
4.1 816.418.00.1 Flush valve seal
5 256.000.00.1 Air hose 3.5m
6 118.006.11.1 Flush bend
7 119.668.00.1 Flush seal for pan
Not Illustrated
294.802.00.1 Wall brackets
240.139.00.1 Seal kit
110 Product and Installation Guide Washroom & Bathroom 2012
SparesSpares WC flush plates
Buy spares direct on 01789 842127
109.720.00.1 Geberit concealed cistern for low height furniture, pneumatic, dual flush
Ordering Information
WC flush plates
115.770.XX.5 Geberit flush plate Sigma01 for dual flush115.778.XX.1 Geberit flush plate Sigma20 for dual flush115.788.XX.1 Geberit flush plate Sigma50 for dual flush
Ordering Information
115.758.XX.1 Geberit flush plate Sigma10 for single flush
Ordering Information
Pos. Article no. Description
1 281.206.00.1 Bottom fill valve
1.1 241.813.00.1 Seal set for bottom fill valve
2 241.415.00.1 Flush valve
2.1 816.418.00.1 Flush valve seal
3 240.574.00.1 Pneumatic actuation unit*
4 241.414.00.1 Cover plate/lid
5 241.413.21.1 Dual flush button*
6 240.575.00.1 Double air hose*
7 119.705.93.1 Flush bend
8 119.668.00.1 Flush seal for pan
*Dual flush only.
For single flush:
240.573.00.1 Pneumatic actuation unit
256.000.00.1 Air hose 3.5m
Not Illustrated
240.139.00.1 Seal kit
WC flush plates
Pos. Article no. Description
1 241.876.00.1 Flush plate fixing frame for tool-free installation
2 241.874.00.1Push rods and distance rods for tool-free installation
3 240.938.00.1 Extension set
4 241.295.00.1 Spring
Note: Samba, Bolero, Twist compatible after 1st April 2008
Pos. Article no. Description
1 241.876.00.1 Flush plate fixing frame
2 241.874.00.1Push rods and distance rods for tool-free installation
3 240.938.00.1 Extension set
Note: Rumba, Mambo and Tango compatible after 1st April 2008
2
2
2
2
1
3
4 4 4 4
2
2 1
2
3
SparesWC flush plates Spares
Product and Installation Guide Washroom & Bathroom 2012 111
Buy spares direct on 01789 842127
115.770.XX.1 Geberit flush plate Samba for dual flush115.777.XX.1 Geberit actuator plate Bolero for dual flush115.780.XX.1 Geberit flush plate Twist for dual flush
Ordering Information
115.750.XX.1 Geberit flush plate Rumba for stop-and-go flush115.751.XX.1 Geberit flush plate Mambo for stop-and-go flush115.760.XX.1 Geberit flush plate Tango for stop-and-go flush
Ordering Information
Pos. Article no. Description
1 813.514.00.1 Spring
2 240.935.00.1 Flush plate fixing frame
2.1 240.934.00.1 Push rod locking piece
3 240.936.00.1 Push rods (pair)
4 240.173.00.1 Distance rods (pair)
5 240.930.00.1 Inner cover
Note: For post May 2008 installation please use Sigma spares list
Pos. Article no. Description
1 813.514.00.1 Spring
2 240.935.00.1 Flush plate fixing frame
2.1 240.933.00.1 Push rod locking piece
3 240.936.00.1 Push rods (pair)
4 240.173.00.1 Distance rods (pair)
5 240.930.00.1 Inner cover
Note: For post May 2008 installation please use Sigma spares list
112 Product and Installation Guide Washroom & Bathroom 2012
SparesSpares
Buy spares direct on 01789 842127
115.228.XX.1 Geberit flush plate Kappa20 for dual flush115.240.XX.1 Geberit flush plate Kappa21 for dual flush115.260.XX.1 Geberit flush plate Kappa50 for dual flush 115.666.XX.1 Geberit flush plate Artline for dual flush
Ordering Information
111.623.00.1 Geberit Duofix frame for urinal, H130, for tank fed water supply111.622.00.1 Geberit Duofix frame for urinal, H130, flush pipe with pipe interrupter for mains fed water supply
Ordering Information
Pos. Article no. Description
1 241.295.00.1 Spring
2 240.639.00.1 Push rods and distance rods (pair)
3 240.646.00.1 Flush plate fixing frame
4 240.206.00.1 Inner cover
5 240.938.00.1 Extension set (order separately)
Duofix urinal frames
Pos. Article no. Description
1 242.195.00.1 Hose R8 for inlet UR-element
2 242.039.00.1 Crossbar for water supply 32 mm
3 152.489.16.1 Inlet connector & collar
4 242.045.00.1 Fixation rods complete
4.1 242.046.00.1 Plastic nut for urinal fastening
5 240.027.46.1 Chrome caps & washers
6 242.210.00.1 Cross bar metal for urinal element for outlet
7 152.950.11.1 Urinal trap
7 152.983.00.1 Urinal trap
8 240.306.00.1 Protection plug
9 240.315.00.1 Urinal outlet bend complete
9.1 152.693.00.1 Rubber collar reducer 63x50
10 242.516.00.1 Geberit straight connector, PVC d50
11 111.892.00.1 Hexagonal self tapping screws
12see 116.001.00.1 Urinal installation set universal
4
2
2
32
11
5
9
12
10
9.1
6
2
5
4.1 4
8
3
11
11 1
7
SparesFill and flush valves for ceramic cisterns Spares
Product and Installation Guide Washroom & Bathroom 2012 113
Buy spares direct on 01789 842127
116.001.00.1 Installation set for Geberit urinal flush control, electronic, plastic nipple116.003.00.1 Installation set for Geberit urinal flush control, electronic, with flush pipe
Ordering Information
Fill and flush valves for ceramic cisterns
240.705.00.1 Geberit filling valve type 380 for concealed cistern
Ordering Information
281.206.00.1 Geberit filling valve type 360 for ceramic cistern, water supply connection at the bottom, 1/2"
Ordering Information
Pos. Article no. Description
1 242.130.00.1 Connection nipple urinal straight
2 242.131.00.1 Connection nipple urinal bent
3 241.934.00.1 Stop valve with throttle, complete
3.1 241.933.00.1 Regulating screw
4 241.930.00.1 Protection cover with protection cover lid
5 241.947.00.1 Insulation protection with connection terminal
6 242.156.00.1 Lip seal flushing pipe
Fill and flush valves for ceramic cisterns
Pos. Article no. Description
1 240.771.00.1 Diaphragm assembly
2 261.358.00.1 Stainless steel connection hose 3/8"
Pos. Article no. Description
1 241.813.00.1 Seal set
4
12
5
6
3.1
3
114 Product and Installation Guide Washroom & Bathroom 2012
SparesSpares Fill and flush valves for ceramic cisterns
Buy spares direct on 01789 842127
282.350.KD.1 Geberit flush valve type 280 for ceramic cistern, with blue square dual flush
Ordering Information
261.157.00.1 Twico I dual flush valve two half-moon design
Ordering Information
Pos. Article no. Description
1 241.800.KD.1 Flush button
2 241.801.00.1 Basket
2.1 240.278.00.1 Overflow pipe
3 816.418.00.1 Flush valve seal
4 261.630.00.1 Connection set
4.1 241.350.00.1 Connection washer
Pos. Article no. Description
1 816.418.00.1 Flush valve seal
2 261.200.00.1 Push button and pair of rods
3 240.276.00.1 Cover
4 261.630.00.1 Connection set
4.1 241.350.00.1 Connection washer
Installation GuideOverview Main methods of Duofix installation
Product and Installation Guide Washroom & Bathroom 2012 115
Main methods of Duofix installationOverview
For cladding both Dry Wall and Pre Wall installations we recommend the use of 1 x 12.5 mm moisture and fire resistant plasterboard or 2 x 12.5 mm standard plasterboard.
Note: Installation videos can be found at www.geberit.co.uk. Note: Any boarding or furniture panelling must be fixed tight up against the face of the relevant Duofix frame, and screwed directly to the frame where possible
Duofix - Dry Wall Duofix - PreWall
In stud wall PreWall fixing offers the ability to construct a duct in front of anexisting wall to hide plumbing and drainage.
Duofix – PreWall System Duofix – PreWall System – Plasterboard
The addition of system rail offers a more integrated look and simplifies cladding and tiling.
The use of system rail also offers the opportunity to install Duofix in front of plaster stud walls.NB. Plasterboard has to be at least 18 mm thick.
Duofix – Full Height System Duofix in Panels
Full height Duofix telescopic studs enable you to create a load bearing stud wall.
Speak to us about our partnership with panelling system manufacturers when you need access behind the wall to plumbing and services.
116 Product and Installation Guide Washroom & Bathroom 2012
Installation GuideMain methods of Duofix installation Duofix in dry wall
Duofix in dry wall
1.
2.
3.
Duofix in dry wall
The 1.12 m high frames have a 1 metre mark on the frame to assist levelling and installation. The 0.98 m and 0.82 m high frames should be measured from the finished floor level to the top of the frames. Height measurements must be set from the finished floor level. The feet are adjustable by 200 mm and can be unscrewed and turned through 90 degrees if required.
It is very important that the frame is fixed so that the front of the frame is level with the front of the studs.
Once levelled and feet have been adjusted and secured the frame can be fixed into the studs with screws provided.
Fixing in wooden studs
1000
00
A
B
A
BB 13
3
1
2
UW 75 UW 50
PH 3
AA
AA
A
ø 10 mm 13 mm
10
30
30
Installation GuideDuofix in PreWall Main methods of Duofix installation
Product and Installation Guide Washroom & Bathroom 2012 117
Duofix in PreWall
1.
2.
3.
Duofix in PreWall
Measure and mark wall taking into account finished floor levels. Drill wall and floor fixing holes.
Fit PreWall brackets to frame together with plastic packing piece. Secure and tighten wall and feet fixings.
Make final adjustments to level and depth measurement before fixing plastic locking nut.
375375
460460
0
1081080
0
10 mm10 mm
10 mm10 mm
1
1
2
2
100010001000 A
B
A
BB 13
13
BB
AAAA
BB
AA
BB
131
2
AAAA
AA
13
PH 3
12
118 Product and Installation Guide Washroom & Bathroom 2012
Installation GuideMain methods of Duofix installation Duofix PreWall system
Duofix PreWall system
Duofix PreWall system
mm01 ø
25
001.xam
H
005.xam005.xam
m01 øm
25
001.xam
H
0
002-0
H
531.nim 004.xam
RH
.1 ,roolf eht ot liar metsys eht gnitnuoM.gniliec dna sllaw
.2 eht gnitnuoM.liar eht ot semarf
.3 lios eht rof tcud a gnitaerC moor eht gnisu kcats
.sduts thgieh
gnixif draobretsalp roF
002-531
1.00.788.111 .rN .trA
004-002
25
001.xam
H002.xam002.xam
25
001.xam
H
llaw dilos roFgnixif
0-2000
H=1120H=980
H=820
The use of system rail makes for a moreintegrated look and makes cladding and hidingdrainage and supply pipework easy. It alsoallows for Duofix frames to be installed againstplasterboard stud walls (Plasterboard must be at least18 mm thick).
3
C
2 A
B
1
6
3
3
6
2
A
B
1
45
4
4
A
BD
2C
1
B
A
3 4
1
2
1C
D3
A
B
21
32
5
1
A
B
A
B4
1
1
2
2
Installation GuideDuofix system full height Main methods of Duofix installation
Product and Installation Guide Washroom & Bathroom 2012 119
Duofix system full height
Duofix system full height
220
0-3
20
02
20
0-3
20
0
metsys htiw rehtegot sduts thgieh moor wen fo esu ehTllaW yrD lanretni gnitroppus fles a dliub ot uoy swolla liar
.llaWerP ro
.3 eruces neht dna emarf tnuoM.duts thgieh moor dnoces
.1 eht ot liar metsys eht tnuoM.gniliec dna llaw ,roolf
.2 eruces dna tnuoM.duts thgieh moor
25
2
A
B
1
1
2
1
4
2
3
3
1
3D
2B
C
C
D2
A
B
1
1
1A
6
2
A
B
1 2
2
3
6
5
3
4
4
120 Product and Installation Guide Washroom & Bathroom 2012
Installation GuideMain methods of Duofix installation Corner applications
Corner applications
1.12 m Standard frame with corner brackets
Corner PreWall brackets (111.835.00.1) can be used for all Duofix frames in corner installations, enabling greater use of space.
1.12 m Corner frame universal
For extra space saving and different installation possibilities, this frame is completely adjustable with angle to the wall range of 30-60 degrees.
Corner applications
C
A
B
566-594
049-007
0331 - 099
stekcarb renroC
4X 4X 4X
735035325515905205594784084374664954254544834134424714014304693 A
067057047037027017007096086076066056046036026016006095085075065B
083573073563063553053543043533033523023513013503003592092582082C
B
A
C5353
57252
51
81
51
Installation GuideWC Waste and drainage connection
Product and Installation Guide Washroom & Bathroom 2012 121
Waste and drainage connectionWaste and drainage connectionTo enable you to get the maximum benefits when using Duofix installation systems it is important that the right waste and drainage connections are made. At Geberit as well as having over 100 yearsexperience in installation systems, we are also one of the leading European manufacturers of waste and drainage products.The following pages detail the requirements for installation of WC and urinal elements. We have also included reference numbers of our Geberit HDPE ranges to make ordering easier.
Geberit Duofix connectors are specifically designed to secure into the Geberit frame as shown in this picture.
WC
Single WC with connection above floor level
Multi or single WC with connection into float below floor level
Multi WC with connection into float above floor level
WC
33 egap eeS
122 Product and Installation Guide Washroom & Bathroom 2012
Installation GuideWaste and drainage connection WC
Exploded view of WC connector fittings
Back to back WC frames (single frames)
Back to back WC frames
Installation GuideUrinal Waste and drainage connection
Product and Installation Guide Washroom & Bathroom 2012 123
Urinal
Urinal
124 Product and Installation Guide Washroom & Bathroom 2012
Numerical index
Article no. Page
107.35.05B 78
107.35.14B 78
107.35.24B 78
107.35.34B 78
109.200.00.1 11
109.211.00.1 12
109.309.00.5 10
109.720.00.1 13
109.772.00.1 11
111.242.00.1 6
111.292.00.1 6
111.352.00.5 9
111.353.00.5 5
111.383.00.5 3
111.384.00.5 4
111.399.00.5 8
111.493.00.1 40
111.494.00.1 39
111.495.00.1 39
111.543.00.1 56
111.544.00.1 56
111.545.00.1 55
111.622.00.1 57
111.623.00.1 58
111.706.00.1 7
111.729.00.1 7
111.731.00.1 84
111.743.00.1 85
111.790.00.1 9
111.830.00.1 71
111.835.00.1 73
111.843.00.1 72
111.844.00.1 72
111.847.00.1 71
111.859.00.1 60
111.867.00.1 71
111.868.00.1 72
111.869.00.1 72
111.871.00.1 70
111.872.00.1 70
111.873.00.1 70
111.874.00.1 70
111.878.00.1 71
111.887.00.1 73
111.889.00.1 73
111.892.00.173, 106, 107,
112
115.075.21.1 24
115.075.21.Z 24
115.114.11.1 21
115.114.21.1 21
115.200.11.1 60
115.210.CD.1 60
115.210.GT.1 60
115.214.CD.1 60
115.214.GT.1 60
115.228.10.1 19
115.228.11.1 19
115.228.21.1 19
115.228.46.1 19
115.228.CG.1 19
115.228.DK.1 19
115.228.DT.1 19
115.228.DW.1 19
115.228.EP.1 19
115.228.FB.1 19
115.228.FR.1 19
115.228.GM.1 19
115.228.KB.1 19
115.240.KH.1 20
115.240.KJ.1 20
115.240.KK.1 20
115.240.KL.1 20
115.240.KM.1 20
115.240.KN.1 20
115.260.11.1 20
115.260.21.1 20
115.260.46.1 20
115.260.HC.1 20
115.322.11.1 97
115.323.11.1 96
115.324.SF.1 97
115.324.SG.1 97
115.325.SF.1 96
115.325.SG.1 96
115.600.KQ.1 15
115.600.KR.1 15
115.600.SI.1 15
115.600.SJ.1 15
115.600.SQ.1 15
115.612.00.1 18
115.680.11.1 20
115.680.21.1 20
115.723.21.1 43
115.725.21.1 44
115.733.21.1 42
115.738.21.1 43
115.739.21.1 44
115.740.21.1 42
115.750.11.1 19
115.750.21.1 19
115.750.46.1 19
115.750.KB.1 19
115.751.00.1 19
115.758.KH.1 14
115.758.KJ.1 14
115.758.KK.1 14
115.758.KL.1 14
115.758.KM.1 14
115.758.KN.1 14
115.760.11.1 19
115.760.21.1 19
Article no. Page
115.760.45.1 19
115.760.46.1 19
115.760.DT.1 19
115.760.GM.1 19
115.760.HC.1 19
115.760.KA.1 19
115.765.46.1 20
115.770.10.5 13
115.770.11.5 13
115.770.21.5 13
115.770.46.5 13
115.770.CG.5 13
115.770.DK.5 13
115.770.DT.5 13
115.770.DW.5 13
115.770.EP.5 13
115.770.FB.5 13
115.770.FR.5 13
115.770.GM.5 13
115.770.KA.5 13
115.777.10.1 18
115.777.11.1 18
115.777.21.1 18
115.777.46.1 18
115.777.CG.1 18
115.777.DK.1 18
115.777.DT.1 18
115.777.DW.1 18
115.777.EP.1 18
115.777.FB.1 18
115.777.FR.1 18
115.777.GM.1 18
115.777.KB.1 18
115.778.KH.1 14
115.778.KJ.1 14
115.778.KK.1 14
115.778.KL.1 14
115.778.KM.1 14
115.778.KN.1 14
115.778.SN.1 14
115.781.SN.1 14
115.785.00.1 17
115.785.11.1 17
115.785.DW.1 17
115.785.EP.1 17
115.785.GH.1 17
115.785.SC.1 17
115.785.SD.1 17
115.785.SE.1 17
115.788.00.1 16
115.788.11.1 16
115.788.DW.1 16
115.788.EP.1 16
115.788.GH.1 16
115.788.SC.1 16
115.788.SD.1 16
Article no. Page
115.788.SE.1 16
115.792.GH.1 18
115.798.00.1 21
115.831.00.1 74
115.855.00.1 25
115.857.00.1 28
115.857.21.1 28
115.860.00.1 73
115.861.00.1 28
115.890.00.1 26
115.891.00.1 27
115.918.00.1 24
115.939.00.1 25
115.941.11.1 23
115.941.KA.1 23
115.942.11.1 23
115.942.KA.1 23
115.943.21.1 23
115.947.00.1 22
115.947.21.1 22
115.949.21.1 22
115.999.21.1 24
116.001.00.1 59
116.003.00.1 59
116.011.11.5 61
116.011.21.5 61
116.011.46.5 61
116.012.11.1 66
116.012.21.1 66
116.012.46.1 66
116.013.FW.1 67
116.014.11.1 69
116.014.21.1 69
116.014.46.1 69
116.015.KH.1 62
116.015.KJ.1 62
116.015.KK.1 62
116.015.KL.1 62
116.015.KM.1 62
116.015.KN.1 62
116.016.00.1 64
116.016.11.1 64
116.016.DW.1 64
116.016.EP.1 64
116.016.SC.1 64
116.016.SD.1 64
116.016.SE.1 64
116.021.11.5 61
116.021.21.5 61
116.021.46.5 61
116.022.11.1 66
116.022.21.1 66
116.022.46.1 66
116.023.FW.1 68
116.024.11.1 69
116.024.21.1 69
Article no. Page
Numerical index
Product and Installation Guide Washroom & Bathroom 2012 125
116.024.46.1 69
116.025.KH.1 63
116.025.KJ.1 63
116.025.KK.1 63
116.025.KL.1 63
116.025.KM.1 63
116.025.KN.1 63
116.026.GH.1 65
116.031.11.5 62
116.031.21.5 62
116.031.46.5 62
116.032.11.1 67
116.032.21.1 67
116.032.46.1 67
116.033.FW.1 68
116.034.11.1 70
116.034.21.1 70
116.034.46.1 70
116.035.KH.1 63
116.035.KJ.1 63
116.035.KK.1 63
116.035.KL.1 63
116.035.KM.1 63
116.035.KN.1 63
116.036.GH.1 65
116.090.SG.1 26
116.090.SM.1 26
116.091.SG.1 27
116.091.SM.1 27
116.107.21.1 51
116.108.21.1 52
116.117.21.1 52
116.118.21.1 53
116.127.21.1 51
116.128.21.1 53
116.135.21.1 45
116.136.21.1 48
116.145.21.1 47
116.146.21.1 50
116.155.21.1 46
116.156.21.1 49
116.235.21.1 45
116.236.21.1 48
116.245.21.1 47
116.246.21.1 50
116.255.21.1 46
116.256.21.1 49
116.335.21.1 40
116.336.21.1 41
116.366.21.1 41
116.450.00.1 54
116.451.00.1 55
116.452.00.1 55
118.006.11.1 109
119.652.16.1 108
Article no. Page
119.668.00.1106, 107, 109,
110
119.705.93.1 110
123.137.11.1 12
131.002.SI.1 29
131.002.SJ.1 29
131.002.SL.1 29
131.002.SQ.1 29
131.021.SI.1 28
131.021.SJ.1 28
131.021.SL.1 28
131.021.SQ.1 28
131.030.SI.1 37
131.030.SJ.1 37
131.030.SQ.1 37
131.031.SI.1 29
131.031.SJ.1 29
131.031.SQ.1 29
131.032.SI.1 36
131.032.SJ.1 36
131.032.SQ.1 36
131.033.SI.1 36
131.033.SJ.1 36
131.033.SQ.1 36
131.040.SI.1 30
131.040.SJ.1 30
131.040.SQ.1 30
131.041.SI.1 30
131.041.SJ.1 30
131.041.SQ.1 30
131.042.SI.1 31
131.042.SJ.1 31
131.042.SQ.1 31
131.043.SI.1 31
131.043.SJ.1 31
131.043.SQ.1 31
131.044.SI.1 32
131.044.SJ.1 32
131.044.SQ.1 32
131.045.SI.1 32
131.045.SJ.1 32
131.045.SQ.1 32
131.046.SI.1 33
131.046.SJ.1 33
131.046.SQ.1 33
131.047.SI.1 33
131.047.SJ.1 33
131.047.SQ.1 33
131.048.SI.1 34
131.048.SJ.1 34
131.048.SQ.1 34
131.049.SI.1 34
131.049.SJ.1 34
131.049.SQ.1 34
131.050.SI.1 35
131.050.SJ.1 35
Article no. Page
131.050.SQ.1 35
131.051.SI.1 35
131.051.SJ.1 35
131.051.SQ.1 35
131.074.00.1 38
131.082.16.1 38
131.083.16.1 38
131.085.11.1 38
131.088.29.1 38
131.099.00.1 37
131.104.00.1 37
131.105.00.1 38
131.108.11.1 38
131.109.21.1 37
131.110.21.1 37
146.114.11.1 93
146.122.11.1 94
146.132.11.1 95
146.181.11.1 92
147.008.00.1 100
147.231.00.1 104
147.235.00.1 104
150.247.00.1 83
150.535.21.1 80
150.536.21.1 81
150.679.21.1 84
150.688.21.1 84
150.712.21.1 81
150.713.21.1 82
150.770.11.1 82
150.770.21.1 82
150.771.11.1 83
150.771.21.1 83
150.772.11.1 83
150.772.21.1 83
151.039.21.1 80
152.170.16.1 79
152.424.00.1 106, 107
152.426.46.1 106, 107
152.434.06.1 109
152.438.46.1 78
152.489.16.1 112
152.693.00.1 112
152.950.11.1 112
152.983.00.1 112
154.005.00.1 86
154.100.00.1 87
154.101.00.1 87
154.102.00.1 87
154.103.00.1 87
154.105.00.1 88
154.106.00.1 88
154.107.00.1 88
154.108.00.1 88
154.130.00.1 87
154.131.00.1 87
Article no. Page
154.135.00.1 88
154.136.00.1 88
154.299.00.1 88
154.300.00.1 86
154.301.00.1 86
154.302.00.1 86
154.303.00.1 87
154.304.00.1 87
154.305.00.1 87
154.306.00.1 87
154.330.00.1 86
154.330.11.1 85
154.330.21.1 85
154.330.FW.1 85
154.350.00.1 88
154.351.00.1 88
154.352.00.1 88
154.353.00.1 88
154.354.00.1 88
154.355.00.1 88
154.356.00.1 88
154.357.00.1 88
154.360.00.1 88
154.361.00.1 88
154.362.00.1 88
154.363.00.1 88
156.050.00.1 10
156.051.00.1 40
180.101.11.1 91
217.713.46.1 106, 107
240.027.46.1 112
240.057.11.1 103
240.116.00.1 99
240.139.00.1 109, 110
240.172.00.1 107, 109
240.173.00.1 111
240.189.00.1 106, 107
240.206.00.1 107, 109, 112
240.226.11.1 103
240.269.00.1106, 107, 108,
109
240.276.00.1 114
240.278.00.1 114
240.282.00.1 107, 109
240.298.00.1106, 107, 108,
109
240.306.00.1 112
240.315.00.1 112
240.347.00.1106, 107, 108,
109
240.417.00.1 107
240.419.00.1 72
240.495.00.1 103
240.533.00.1 107, 109
240.573.00.1 109, 110
240.574.00.1 110
Article no. Page
126 Product and Installation Guide Washroom & Bathroom 2012
Numerical index
240.575.00.1 110
240.576.00.1 109
240.623.00.1 107
240.622.00.1 106, 108
240.623.00.1 109
240.625.00.1 99
240.626.00.1 99
240.634.00.1 93, 94, 95, 98
240.635.00.1 93, 94, 95, 98
240.637.00.1 107, 109
240.638.00.1 107, 109
240.639.00.1 112
240.646.00.1 112
240.665.00.1 101
240.700.00.1 89, 109
240.705.00.1106, 107, 108,
109
240.771.00.1106, 107, 108,
109, 113
240.846.00.1 107, 109
240.922.00.1 106, 107, 109
240.923.00.1 106, 108
240.928.00.1 107, 109
240.930.00.1 111
240.933.00.1 111
240.934.00.1 111
240.935.00.1 111
240.936.00.1 111
240.938.00.1 21, 110, 112
240.972.00.1 107
241.144.00.1 23
241.167.00.1 106, 108
241.198.00.1 22
241.198.21.1 22
241.199.11.1 21
241.199.21.1 21
241.282.21.1 22
241.295.00.1 110, 112
241.350.00.1 114
241.378.00.1 108, 109
241.413.21.1 110
241.414.00.1 110
241.415.00.1 110
241.516.CG.1 104
241.517.CG.1 104
241.631.00.1 54
241.672.00.1 54
241.692.00.1 44
241.800.KD.1 114
241.801.00.1 114
241.813.00.1 110, 113
241.819.00.1 91, 92, 97
241.824.00.1 106, 108
241.826.00.1 106, 108
241.829.00.1 106, 108
241.857.00.1 106, 108
Article no. Page
241.858.00.1 106, 108
241.859.00.1 106, 108
241.868.00.1 106, 108
241.869.00.1 106
241.874.00.1 110
241.876.00.1 110
241.894.00.1 74
241.930.00.1 113
241.933.00.1 113
241.934.00.1 113
241.947.00.1 113
241.982.00.1 106, 108
242.010.00.1 106
242.012.00.1 106
242.017.00.1 106
242.039.00.1 112
242.045.00.1 112
242.046.00.1 112
242.130.00.1 113
242.131.00.1 113
242.156.00.1 113
242.169.11.1 102
242.170.11.1 104
242.171.11.1 104
242.172.11.1 104
242.173.00.1 105
242.174.00.1 105
242.175.00.1 105
242.176.00.1 105
242.178.11.1 104
242.179.11.1 103
242.180.11.1 103
242.181.11.1 103
242.182.11.1 103
242.183.11.1 103
242.184.11.1 102
242.185.00.1 97
242.186.11.1 104
242.187.00.1 103
242.195.00.1 112
242.210.00.1 112
242.286.CG.1 104
242.310.00.1 74
242.355.00.1 91, 92, 98
242.376.00.1 105
242.377.00.1 105
242.394.00.1 100
242.413.00.1 91, 92, 97
242.516.00.1 112
242.544.GH.1 18
242.545.00.1 99
242.546.00.1 99
242.547.00.1 99
242.555.00.1 74
242.658.00.1 28
242.676.00.1 105
Article no. Page
249.801.00.1 93, 94, 95, 98
250.022.00.1 99
250.026.00.1 101
250.027.00.1 102
250.029.11.1 101
250.030.11.1 102
250.032.00.1 100
250.034.11.1 100
250.037.11.1 102
250.043.00.1 100
250.066.11.1 101
250.067.11.1 101
250.068.00.1 101
250.069.00.1 101
250.071.00.1 100
250.079.11.1 102
256.000.00.1 109, 110
261.157.00.1 89
261.200.00.1 114
261.358.00.1 113
261.630.00.1 114
281.206.00.1 89, 110
282.350.KD.1 90
294.802.00.1 109
362.771.00.1106, 107, 108,
109
362.796.92.1106, 107, 108,
109
366.061.16.1 76, 106, 107
366.820.92.1 106, 107
366.887.16.1 75
367.792.16.1 76
367.887.16.1 75
367.928.16.1 77, 106, 107
367.945.16.1 77
387.282.00.1 106, 107
388.350.29.1 75
461.030.00.1 73
465.027.00.1 108
616.030.00.1 54
813.224.15.0 105
813.514.00.1 111
816.418.00.1106, 107, 108,109, 110, 114
849.825.00.1 105
889.711.00.1 108
890.240.11.1 109
892.975.00.1 108
F107.35.09B 78
F107.35.18B 78
F107.35.29B 78
Article no. Page