PRODUCT GUIDE 2011 - BW...
-
Upload
duongduong -
Category
Documents
-
view
217 -
download
0
Transcript of PRODUCT GUIDE 2011 - BW...
PRODUCT GUIDE 2011
Issue 7
P r o v i d i n g s u p p o r t f o r a l l y o u r c a t e r i n g e q u i p m e n t n e e d s
2
PRICE LIST – 2011
Supplying the highest qualityequipment to the catering industry
Maidaid Halcyon® was founded in the early seventies and specialises
in cost effective, durable solutions for the catering industry.
The wealth of experience gained over the years has established the
Maidaid Halcyon® range as leaders within the industry. Our machines
have a long standing reputation for durability and reliability.
Maidaid Halcyon® products are constructed from the highest quality
materials to ensure many years of commercial service. We produce
a tough machine to do a tough job.
Whether you want simple reliability or the very latest innovations in
micro-processing, there is a Maidaid Halcyon® machine for you.
What is more, we actually listen to our distributors to help us provide
what is, undoubtedly, the best service in the business.
That’s why, in this Product Guide you will find every product is
shown, together with its price, dimensions and relevant ancillary
products all on one page.
You can also request the brochure in PDF format.
It has never been easier to select and order your Maidaid
Halcyon® equipment.
Maidaid Halcyon® offices are located in an historicVictorian engine shed with a purpose built
25,000 sq ft warehouse at the same location.
3
Contents
IcemakersIcemakers 32
Modular Ice Cube Makers 33
Pebble Icemakers 34
Granular Icemakers 35
Modular Granular & Flat Icemakers 36
Modular Storage Bins 37
Bottle CoolersSingle Door 38
Double Door 38-39
Bezzera Espresso Coffee MachinesBZ Range 40-41
Giulia & Galatea Domus Ranges 42
Bistro Compact Range 43
Bistro Range 44
Ellisse Range 45
Eagle Range 46
Galatea 47
Grinders/Dispensers & Espressopot Coffee 48
Additional Items 49
Water Softeners 50
Baskets and Stands 51
Warewashing Chemical Supplies 52
Stainless Steel Fabrication 53
On Site Commissioning 54
and Staff Training
GlasswashersC Range – Electro Mechanical 4
D Range – Electronic 5
Evolution Range – Under Counter 6
DishwashersC Range – Under Counter 7
D Range – Under Counter 8
Evolution Range – Under Counter 9
C Range – Pass Through 10
D Range – Pass Through 11
Evolution Range – Pass Through 12
MH Range – Heavy Duty 13
MH Range – Heavy Duty Pass Through 14
Dishwasher Ancillary ProductsC Range, D Range and Evolution Range –Pass Through Tabling 15
MH Range – Pass Through Tabling 16
MinirackMinirack – Single Tank Dishwashers 17
Minirack – Dual Tank Dishwashers 18
Minirack – Tabling 19
Rack ConveyorsRack Conveyors 20-25
Rack Conveyor Accessories 26
Rack Conveyor – Tabling 27-28
Flight Machines 29
Utensil/Pot WashersUtensil/Pot Washers 30
Granular Pot Washer 31
4
GENERAL FEATURES■ 2 year warranty■ Reliable electro mechanical components and simple controls
for long life■ Includes rinse aid and detergent dispensers■ Supplied with 2 glass racks (1 glass & 1 plate rack on C500 if required)■ Fitted drain pump option or as a kit■ Superbly designed wash and rinse arms
to provide exceptional results■ Self cleaning jets
TECHNICAL FEATURES■ Voltage 240V – single phase■ Water supply pressure – minimum 2 atm / maximum 4 atm■ Wash tank temperature – 55°C■ Rinse boiler temperature – 85ºC
C350C400
C450C500
AncillariesItem Variants Part No. Price £
Water Softener (manual)
Water Softener (automatic)
Booster Pump
Universal Stand(Fits all machines)
Racks – Wire
Racks – Plastic
Breaktanks(class “A” air gap)
Racking System
Chemicals
8 litre12 litreCold waterHot water
Pump for low rinse water pressure or to connect machine to conventionalhot water supply (not exceeding 50°C)
520mm high adjustable stand520mm high adjustable stand – stainless steel520mm high adjustable stand – chrome
Glass/cup rack for C350Glass/cup rack for C400Glass/cup rack for C450Glass/cup rack for C500
Glass/cup rack for C350Glass/cup rack for C400Glass/cup rack for C450Glass/cup rack for C500
Breaktank with rinse booster pump (external freestanding)Breaktank without rinse booster pump (external freestanding)
Mobile three tier racking system for C400Mobile three tier racking system for C450Mobile three tier racking system for C500
For original Maidaid® chemicals see page 52
Q900008Q900012Q900100Q900104
Q904001 (Brass Head)Q904002 (Cast Iron Head)
Q902100Q902101Q902104
Q902000Q902003Q902005Q902007
Q902302Q902303Q902300Z972001
Q904101Q904100
Q902220Q902226Q902221
98110545845
245125
5511575
35394448
35353536
645495
320325345
Model Rack size Useable Dimensions mm Cycle Time Power Amps Pricemm Height mm W x D x H Sec kW Required £
C350 350 x 350 190 400 x 475 x 580 150 2.85 13
C350D Inclusive of fitted drain pump
C400 390 x 390 250 435 x 525 x 655 150 2.85 13
C400D Inclusive of fitted drain pump
C450 450 x 450 260 525 x 560 x 700 150 3 13
C450D Inclusive of fitted drain pump
C500 500 x 500 300 575 x 600 x 820 90-120 2.7/4.7/6.7 13/20/30
C500D Inclusive of fitted drain pump
1,270
1,410
1,590
1,730
2,035
2,225
2,470
2,660
C RANGE – ELECTRO MECHANICAL GLASSWASHERS
5
D RANGE – ELECTRONIC GLASSWASHERS
D350D400
D450D500
Model Rack size Useable Dimensions mm Cycle Time Power Amps Pricemm Height mm W x D x H Sec kW Required £
D350 350 x 350 250 400 x 475 x 625 150 2.8 13 D350D Inclusive of fitted drain pump D400 390 x 390 290 435 x 530 x 670 150 2.9 13 D400D Inclusive of fitted drain pump D450 450 x 450 260 525 x 560 x 695 150 3 13 D450D Inclusive of fitted drain pump D500 500 x 500 300 575 x 610 x 815.. 60-120-180 2.6/4.6/6.6 13/20/30D500D Inclusive of fitted drain pump D500WS Inclusive of built in water softener D500WSD Inclusive of built in water softener and drain pump
AncillariesItem Variants Part No. Price £
Water Softener (manual)
Water Softener (automatic)
Booster Pump
Universal Stand(Fits all machines)
Racks – Wire
Racks – Plastic
Breaktanks(class “A” air gap)Racking System
Chemicals
8 litre12 litreCold waterHot waterPump for low rinse water pressure or to connect machine to conventionalhot water supply (not exceeding 50°C)520mm high adjustable stand520mm high adjustable stand – stainless steel520mm high adjustable stand – chromeGlass/cup rack for D350Glass/cup rack for D400Glass/cup rack for D450Glass/cup rack for D500Glass/cup rack for D350Glass/cup rack for D400Glass/cup rack for D450Glass/cup rack for D500Breaktank with rinse booster pump (external freestanding)Breaktank without rinse booster pump (external freestanding)Mobile three tier racking system for D400Mobile three tier racking system for D450Mobile three tier racking system for D500For original Maidaid® chemicals see page 52
Q900008Q900012Q900100Q900104
Q904001 (Brass Head)Q904002 (Cast Iron Head)
Q902100Q902101Q902104Q902000Q902003Q902005Q902007Q902302Q902303Q902300Z972001Q904101Q904100Q902220Q902226Q902221
9811054584524512555115753539444835353536645495320325345
TECHNICAL FEATURES■ Voltage 240V – single phase
■ Voltage 415V – 3 phase option available on D500
■ Water supply pressure – minimum 2 atm / maximum 4 atm
■ Wash tank temperature – 55°C (adjustable)
■ Rinse boiler temperature – 85°C (adjustable)
GENERAL FEATURES■ 2 year warranty■ Soft touch controls, twin digital temperature displays ■ Built-in detergent and rinse aid dispensers ■ Selectable thermostop for guaranteed temperatures■ Selectable energy saving option■ Moulded easy clean washtank■ Supplied with 2 glass racks (1 glass & 1 plate rack on D500 if required)■ Fitted drain pump option or as a kit■ D500 includes the unique
Renovator cycle for use with Maidaid®
liquid glass renovator to bring glasses to their sparkling best
■ D500 and D500WS supplied with set of surface tray filters
1,4801,6201,9152,0552,4702,6562,9803,1753,2153,405
6
GENERAL FEATURES
AncillariesItem Variants Part No. Price £
Water Softener (manual)
Water Softener (automatic)
Booster Pump
Universal Stand(Fits all machines)
Racks – Wire
Racks – Plastic
Breaktanks(class “A” air gap)
Racking System
Chemicals
8 litre12 litreCold waterHot water
Pump for low rinse water pressure or to connect machine to conventionalhot water supply (not exceeding 50°C)
520mm high adjustable stand520mm high adjustable stand – stainless steel520mm high adjustable stand – chrome
Glass/cup rackPlate rack
Glass/cup rackPlate rack
Internally fitted as standard to 510 modelsBreaktank with rinse booster pump (external freestanding)Breaktank without rinse booster pump (external freestanding)
Mobile three tier racking system for models 500 and 510
For original Maidaid® chemicals see page 52
Q900008Q900012Q900100Q900104
Q904001 (Brass Head)Q904002 (Cast Iron Head)
Q902100Q902101Q902104
Q902007Q902012
Z972001Z972003
Q904101Q904100
Q902221
98110545845
245125
5511575
4848
3636
645495
345
Model Rack size Useable Dimensions mm Cycle Time Power Amps Pricemm Height mm W x D x H Sec kW Required £
Evolution 400 400 x 400 280 465 x 555 x 700 90-120 Adjustable + full clean 2.8 13
Evolution 400WS 400 x 400 280 465 x 555 x 700 90-120 Adjustable + full clean 2.8 13
Evolution 500 500 x 500 265 600 x 600 x 720 90-120 Adjustable 2.6/4.6/6 13/20/30
Evolution 500WS 500 x 500 265 600 x 600 x 720 90-120 Adjustable 2.6/4.6/6 13/20/30
Evolution 510 500 x 500 360 600 x 600 x 820 90-120-180 Adjustable 2.6/4.6/6.6 13/20/30
Evolution 510WS 500 x 500 360 600 x 600 x 820 60-120-180 Adjustable 2.6/4.6/6.6 13/20/30
2,890
3,190
3,040
3,310
3,755
4,075
Evolution 500 Evolution 510Evolution 400
■ 2 year warranty■ Designed to minimise
energy usage■ Low water consumption■ All machines double
skinned■ Simple soft touch
control, digital display
■ Automatic cycle selfcleaning at drain down
■ Selectable quick start andenergy saving option
■ Selectable thermostop forguaranteed rinsetemperature
■ Superior peristalticdosing for both detergentand rinse aid
■ Chemical priming anddose control from thecontrol panel
■ Three programmablecycle times
■ Fully moulded wash tank■ MWT – Maidaid® Wash
Technology – 10% improvementin wash results
■ MRT – Maidaid® RinseTechnology – Constant rinseperformance
■ MDT – Maidaid® DrainTechnology – Drain pump asstandard
■ MCS – Maidaid® ContinuousSoftener (on 400WS, 500WSand 510WS models)
TECHNICAL FEATURES■ Voltage 240V – Single phase■ Voltage 415V – Three phase option available
(except Evo 400)■ Water supply pressure – minimum 2
atm/maximum 4 atm – Water softenerversions minimum 2.5 atm
■ Wash tank temperature – 55º C (adjustable)■ Rinse boiler temperature – 85º C (adjustable)
CERTIFICATION■ WRAS
EVOLUTION RANGE – UNDER COUNTER GLASSWASHERS
7
C RANGE – UNDER COUNTER DISHWASHERS
CERTIFICATION■ WRAS on C510 and C510D
Model Rack size Useable Dimensions mm Cycle Time Power Amps Pricemm Height mm W x D x H Sec kW Required £
C500 500 x 500 300 575 x 600 x 820 90-120 2.7/4.7/6.7 13/20/30
C500D Inclusive of fitted drain pump
C510 500 x 500 300 575 x 625 x 820 90-120 2.7/4.7/6.7 13/20/30
C510D Inclusive of fitted drain pump
GENERAL FEATURES■ 2 year warranty
■ Built-in detergent and rinse aid dispensers
■ Electro-mechanical components and simple controls
■ C510 supplied with 1 glass/cup & 1 plate rack
■ Up to 400 plates per hour
■ Fitted drain pump option
■ Fitted breaktank (type “A” air gap) on C510 models
TECHNICAL FEATURES■ Voltage 240V – single phase
■ Water supply pressure – minimum 2 atm / maximum 4 atm
■ Wash tank temperature – 55°C
■ Rinse boiler temperature – 85°C
AncillariesItem Variants Part No. Price £
Water Softener (manual)
Water Softener (automatic)
Booster Pump
Universal Stand(Fits all machines)
Racks – Wire
Racks – Plastic
Breaktanks(class “A” air gap)
Racking System
Chemicals
12 litre16 litreCold waterHot water
Pump for low rinse water pressure or to connect machine to conventionalhot water supply (not exceeding 50°C)
520mm high adjustable stand520mm high adjustable stand – stainless steel520mm high adjustable stand – chrome
Glass/cup rack Plate rackCutlery rackLarge saucer rack
Glass/cup rack Plate rackRound cutlery insertCompartment racks
(Internally fitted as standard to C510)Breaktank with rinse booster pump (external freestanding)Breaktank without rinse booster pump (external freestanding)
Mobile three tier racking system
For original Maidaid® chemicals see page 52
Q900012Q900016Q900100Q900104
Q904001 (Brass Head)Q904002 (Cast Iron Head)
Q902100Q902101Q902104
Q902007Q902012Z970074Q902008
Z972001Z972003Z976011Various
Q904101Q904100
Q902221
110149545845
245125
5511575
48486517
36365
P.O.A.
645495
345
C510
C500
2,470
2,660
2,795
2,990
8
D RANGE – UNDER COUNTER DISHWASHERS
■ Supplied with set of surface tray filters to limit contaminationof wash water
■ Up to 400 plates per hour
■ Fitted drain pump option
■ Fitted breaktank (type “A” air gap) on D510 models
TECHNICAL FEATURES■ Voltage 240V – single phase
■ Voltage 415V – 3 phase option available on D500 and D510
■ Water supply pressure – minimum 2 atm / maximum 4 atm
■ Wash tank temperature – 55°C (adjustable)
■ Rinse boiler temperature – 85°C (adjustable)
CERTIFICATION■ WRAS on D510 and D510D
Model Rack size Useable Dimensions mm Cycle Time Power Amps Pricemm Height mm W x D x H Sec kW Required £
D500 500 x 500 300 575 x 610 x 815 60-120-180 2.6/4.6/6.6 13/20/30
D500D Inclusive of fitted drain pump
D500WS Inclusive of built in water softener
D500WSD Inclusive of built in water softener and drain pump
D510 500 x 500 300 575 x 635 x 815 60-120-180 2.6/4.6/6.6 13/20/30
D510D Inclusive of fitted drain pump
GENERAL FEATURES■ 2 year warranty
■ Built-in detergent and rinse aid dispensers
■ Soft touch controls, twin digital temperature displays
■ Selectable thermostop for guaranteed temperatures
■ Selectable energy saving option
■ D510 supplied with 1 glass/cup & 1 plate rack
AncillariesItem Variants Part No. Price £
Water Softener (manual)
Water Softener (automatic)
Booster Pump
Universal Stand(Fits all machines)
Racks – Wire
Racks – Plastic
Breaktanks(class “A” air gap)
Racking System
Chemicals
12 litre16 litreCold waterHot water
Pump for low rinse water pressure or to connect machine to conventionalhot water supply (not exceeding 50°C)
520mm high adjustable stand520mm high adjustable stand – stainless steel520mm high adjustable stand – chrome
Glass/cup rack Plate rackCutlery rackLarge saucer rack
Glass/cup rack Plate rackRound cutlery insertCompartment racks
(Internally fitted as standard to D510)Breaktank with rinse booster pump (external freestanding)Breaktank without rinse booster pump (external freestanding)
Mobile three tier racking system
For original Maidaid® chemicals see page 52
Q900012Q900016Q900100Q900104
Q904001 (Brass Head)Q904002 (Cast Iron Head)
Q902100Q902101Q902104
Q902007Q902012Z970074Q902008
Z972001Z972003Z976011Various
Q904101Q904100
Q902221
110149545845
245125
5511575
48486517
36365
P.O.A.
645495
345
D500D510
2,985
3,175
3,210
3,400
3,395
3,580
9
AncillariesItem Variants Part No. Price £
Water Softener (manual)
Water Softener (automatic)
Booster Pump
Universal Stand(Fits all machines)
Racks – Wire
Racks – Plastic
Racking System
Chemicals
8 litre12 litreCold waterHot water
Pump for low rinse water pressure or to connect machine to conventionalhot water supply (not exceeding 50°C)
520mm high adjustable stand520mm high adjustable stand – stainless steel520mm high adjustable stand – chrome
Glass/cup rack Plate rack
Glass/cup rack Plate rack
Mobile three tier racking system for model 510
For original Maidaid® chemicals see page 52
Q900008Q900012Q900100Q900104
Q904001 (Brass Head)Q904002 (Cast Iron Head)
Q902100Q902101Q902104
Q902007Q902012
Z972001Z972003
Q902221
98110545845
245125
5511575
4848
3636
345
EVOLUTION RANGE – UNDER COUNTER DISHWASHERS
510WS510
GENERAL FEATURES■ 2 year warranty
■ Designed to minimise energy usage
■ Low water consumption
■ All machines double skinned
■ Simple soft touch control, digital temperature display
■ Automatic cycle self cleaning at drain down
■ Selectable quick start and energy saving option
■ Selectable thermostop for guaranteed rinse temperature
■ Superior peristaltic dosing for both detergent and rinse aid
■ Chemical priming and dose control from the control panel
■ Three programmable cycle times
■ Fully moulded wash tank
■ MWT – Maidaid® Wash Technology– 10% improvement in wash results
■ MRT – Maidaid® Rinse Technology– Constant rinse performance
■ MDT – Maidaid® Drain Technology– Drain pump as standard
■ MCS – Maidaid® Continuous Softener – on model 510WS
TECHNICAL FEATURES■ Voltage 240V – Single phase
■ Voltage 415V – Three phase option available
■ Water supply pressure – minimum 2 atm/maximum 4 atm– Water softener versions minimum 2.5 atm
■ Wash tank temperature – 55º C (adjustable)
■ Rinse boiler temperature – 85º C (adjustable)
CERTIFICATION■ WRAS
Model Rack size Useable Dimensions mm Cycle Time Power Amps Pricemm Height mm W x D x H Sec kW Required £
Evolution 510 500 x 500 360 600 x 600 x 820 60-120-180 Adjustable 2.6/4.6/6.6 13/20/30
Evolution 510WS 500 x 500 360 600 x 600 x 820 60-120-180 Adjustable 2.6/4.6/6.6 13/20/30
3,755
4,075
10
C RANGE – PASS THROUGH DISHWASHERS
TECHNICAL FEATURES■ Voltage – 240V single phase or 415V three phase
(converted to order or on site)
■ C1025WS includes internal auto water softener
■ C1025WS supplied complete with detergent pump
■ Water supply pressure – minimum 2 atm / maximum 4 atm
■ Wash tank temperature – 55°C
■ Rinse boiler temperature – 85°C
CERTIFICATION■ WRAS on C1010
C1010 (shown with tabling – not included)
C1025WS (shown with tabling – not included)
Model Plates Rack Useable Dimensions mm Cycle Time Power Amps PricePer Hour size mm Height mm W x D x H Sec kW Required £
C1000 Up to 1080 500 x 500 400 720 x 810 x 1450 60-120 4.8 or 6.8 (1 phase) 20 or 30
6.8 (3 phase) 10/phase
C1010 (Specification as C1000 + fitted breaktank)
C1025WS Up to 1080 500 x 500 400 716 x 740 x 1509 90-120-180 4.6/6.6 (1 phase) 20 or 30
adjustable 6.6 (3 phase) 10/phase
D Additional charge for fitted drain pump (also available as a retro fitted kit)
INT P Additional charge for internal fitted booster pump (also available as a retro fitted kit)
DET P Additional charge for fitted detergent pump (also available as a retro fitted kit)
AncillariesItem Variants Part No. Price £
Water Softener (manual)
Water Softener (automatic)
External Booster Pump
Tabling
Chemicals
16 litre20 litre Cold waterHot water
Pump for low rinse water pressure or to connect machine to conventionalhot water supply (not exceeding 50°C)
See page 15
For original Maidaid® chemicals see page 52
Q900016Q900020Q900100Q900104
Q904001 (Brass Head)Q904002 (Cast Iron Head)
149195545845
245125
GENERAL FEATURES■ 2 year warranty
■ C1010 with fitted type ‘A’ air gap breaktank
■ Simple electro-mechanical push button controls
■ Proven electronic time and temperature control
■ 2 cycle times
■ Corner or straight through inlet tabling configurations
■ Built-in rinse aid dispenser
■ Surface tray filter – to prevent debris from contaminating wash water
■ Self draining wash pump – to reduce health risk from bacteria build up
■ Up to 1080 plates per hour
■ C1000 – ideal machine for high volume glasswashing
■ Superbly designed internal surfaces – simple to keep clean
■ Supplied with 1 plastic open and 2 plastic plate racks
C1000
3,755
4,065
4,410
235
235
235
11
D RANGE – PASS THROUGH DISHWASHERS
CONSTANT RINSE PERFORMANCE (CRP)Traditionally, machines rinse by using cold mains water to push hot water out of the rinse boiler, resulting in mixed colder water at the end of the cycle.
With CRP, no cold water is used and the rinse temperature remains constant throughout, producing consistently cleaner dishes as a result.
CERTIFICATION■ WRAS on D2020
AncillariesItem Variants Part No. Price £
Water Softener (manual)
Water Softener (automatic)
External Booster Pump
Tabling
Chemicals
16 litre20 litre Cold waterHot water
Pump for low rinse water pressure or to connect machine to conventionalhot water supply (not exceeding 50°C)Pressure pump set
See page 15
For original Maidaid® chemicals see page 52
Q900016Q900020Q900100Q900104
Q904001 (Brass Head)Q904002 (Cast Iron Head)
Q904006
149195545845
245125325
Model Plates Racks Useable Dimensions mm Cycle Time Power Amps PricePer Hour Supplied Height mm W x D x H Sec kW Required £
D2020 Up to 1080 500 x 500 400 710 x 810 x 1530 60-110-150 & Continuous 6.5 (1 phase) 28
(includes fitted breaktank) 9.1 (3 phase) 13/phase
D Additional charge for fitted drain pump (also available as a retro fitted kit)
INT P Additional charge for internal fitted booster pump (also available as a retro fitted kit)
DET P Additional charge for fitted detergent pump (also available as a retro fitted kit)
D2020 (shown with tabling, sink and pre-wash spray arm – not included)
GENERAL FEATURES■ 2 year warranty■ D2020 with Constant Rinse Performance (CRP)■ D2020 with fitted type ‘A’ air gap breaktank■ Precise and reliable electronic control with soft touch operation■ Digital boiler and wash tank temperature displays■ 3 cycle times plus continuous operation■ Corner or straight through inlet tabling configurations■ Built-in rinse aid dispenser■ Surface tray filter – to prevent debris from contaminating wash water■ Self draining wash pump – to reduce health risk from bacteria build up■ Up to 1080 plates per hour ■ Low water capacity wash tank – energy saving■ Superbly designed internal surfaces –
simple to keep clean■ Supplied with 1 plastic
open and 2 plastic plate racks
TECHNICAL FEATURES■ Voltage – 240V single
phase or 415V three phase (converted to order or on site)
■ Water supply pressure –minimum 2 atm /maximum 4 atm
■ Wash tank temperature –55°C (adjustable)
■ Rinse boiler temperature –85°C (adjustable)
D2020
5,150
235
235
235
12
Evolution 2020 (shown with tabling –
not included)
Evolution 2025WS (shown with tabling –
not included)
Evolution 1010 (shown with tabling, sink and pre-wash
spray arm – not included)
Model Rack Useable Dimensions mm Cycle Time Power Amps Pricesize mm Height mm W x D x H Sec kW Required £
Evolution 1010 500 x 500 400 710 x 800 x 1590 60-120-180 4.8/6.8 (1 phase) 16 or 26 (1 phase)
Adjustable 6.8 (3 phase) 13 (3 phase)
Evolution 2020 500 x 500 400 710 x 800 x 1590 60-120-180 6.4 (1 phase) 30 (1 phase)
Adjustable 9.1 (3 phase) 13 (3 phase)
Evolution 2025WS 500 x 500 400 706 x 740 x 1565 60-120-180 4.6 or 6.6 (1 phase) 16 or 30 (1 phase)
Adjustable 6.6 (3 phase) 10 (3 phase)
D Additional charge for fitted drain pump (also available as a retro fitted kit)
INT P Additional charge for internal fitted booster pump (also available as a retro fitted kit)
DET P Additional charge for fitted detergent pump (also available as a retro fitted kit)
EVOLUTION RANGE – PASS THROUGH DISHWASHERS
AncillariesItem Variants Part No. Price £
Water Softener (manual)
Water Softener (automatic)
External Booster Pump
Tabling
Chemicals
16 litre20 litre Cold waterHot water
Pump for low rinse water pressure or to connect machine to conventionalhot water supply (not exceeding 50°C)Pressure pump set
See page 15
For original Maidaid® chemicals see page 52
Q900016Q900020Q900100Q900104
Q904001 (Brass Head)Q904002 (Cast Iron Head)
Q904006
149195545845
245125325
■ MDS – Maidaid® Drain System on model 1010– Operates with gravity or optional pumped drain
■ MDT – Maidaid® Drain Technology on model 2020– Drain pump as standard
TECHNICAL FEATURES■ New model 2025WS includes internal auto water softener■ New model 2025WS supplied complete with detergent pump■ Voltage 240V – Single phase■ Voltage 415V – Three phase option available■ Water supply pressure – minimum 2 atm/maximum 4 atm■ Wash tank temperature – 55º C (adjustable)■ Rinse boiler temperature – 85º C (adjustable)
CERTIFICATION■ WRAS
GENERAL FEATURES■ 2 year warranty■ Designed to minimise energy usage■ Low water consumption■ Simple soft touch control, digital temperature display■ Automatic self cleaning cycle at drain down on model 2020■ Selectable energy saving option■ Selectable quick start■ Selectable thermostop for guaranteed rinse temperature■ Built in breaktank■ Superior peristaltic dosing for rinse aid as standard■ Superior peristaltic detergent dosing optional■ Surface tray filter■ Three programmable cycle times■ Fully moulded wash tank■ MWT – Maidaid® Wash Technology – 10% improvement in wash results■ MRT – Maidaid®
Rinse Technology– Constant rinse performance on models 1010 & 2020
5,760
6,520
6,850
235
235
235
13
MH RANGE – HEAVY DUTY DISHWASHERS
Model Rack size Useable Dimensions mm Cycle Time Power Amps Pricemm Height mm W x D x H Sec kW Required £
MH520 500 x 500 320 600 x 610 x 850 25 to 300 5.1 23
MH520T 500 x 500 400 600 x 680 x 865 25 to 300 5.1 23
MH720 500 x 500 450 600 x 700 x 1385 25 to 300 7.7 32
D Additional charge on above models for a fitted drain pump (also available as a retro-fit kit)
AncillariesItem Variants Part No. Price £
Water Softener (manual)
Water Softener (automatic)
Booster Pump
Racks – Wire
Racks – Plastic
Racking System
Chemicals
16 litre – low hardness areas20 litre – high hardness areasCold waterHot water
Pump for low rinse water pressure or to connect machine to conventionalhot water supply (not exceeding 50°C)
Glass/cup rack Plate rackCutlery rackLarge saucer rack
Glass/cup rack Plate rackRound cutlery insertCompartment racks
Mobile three tier racking system
For original Maidaid® chemicals see page 52
Q900016Q900020Q900100Q900104
Q904001 (Brass Head)Q904002 (Cast Iron Head)
Q902007Q902012Z970074Q902008
Z972001Z972003Z976011Various
Q902221
149195545845
245125
48486517
36365
P.O.A.
345
GENERAL FEATURES■ 2 year warranty
■ Constructed of heavy gauge stainless steel – built to last
■ Soft touch controls, twin digital temperature displays
■ Proven electronic controls
■ Powerful wash pump to shift stubborn deposits
■ Double skin – for low noise in operation and heat conservation
■ All MH models have fitted breaktank (type “A” air gap) as standard(ideal for Health Care market)
■ Self draining wash pump – to reduce health risk from bacteria build up
■ All models have 3 adjustable cycle times (25 to 300 seconds)
■ Built-in detergent and rinse aid dispensers
■ Thermostop system on all models to ensure rinse temperatures forgood results
■ Supplied with 1 glass/cup & 1 plate rack dimensions 500 x 500mm
■ Moulded wash tank for easy cleaning
■ MH520T Under counter model with extra high internal clearance for 380mm diameter plates. It is not possible to supply with drain pump
■ MH720 Upright front opening dishwasher with clearance for 430mm diameter plates
■ MH720 supplied with open end tray rack as standard
■ MH500 & MH720 supplied with set of surface tray filters to limit contamination of wash water
TECHNICAL FEATURES■ Voltage 240V – single phase or 415V – 3 phase
■ Water supply pressure – minimum 2 atm / maximum 4 atm
■ Wash tank temperature – 55°C (adjustable)
■ Rinse boiler temperature – 85°C (adjustable)
CERTIFICATION■ WRAS
MH720MH520TMH520
3,720
3,910
4,380
250
14
MH RANGE – HEAVY DUTY PASS THROUGH DISHWASHERS
Model Plates Racks Useable Dimensions mm Cycle Time Power Amps PricePer Hour Supplied Height mm W x D x H Sec kW Required £
MH2040 Up to 1080 500 x 500 400 720 x 730 x 1410 60 to 300 7.5 30
MH2050 Up to 1300 500 x 500 400 720 x 730 x 1410 50 to 300 10.5 16/phase
HALDP2 Additional charge for fitted drain pump (also available as a retro fitted kit)
HALINT Additional charge for internal fitted booster pump (also available as a retro fitted kit)
HALDET Additional charge for fitted detergent pump (also available as a retro fitted kit)Please note: Drain pump and internal booster pump cannot be fitted to the same machine
AncillariesItem Variants Part No. Price £
Water Softener (manual)
Water Softener (automatic)
External Booster Pump
Tabling
Chemicals
16 litre20 litre Cold waterHot water
Pump for low rinse water pressure or to connect machine to conventionalhot water supply (not exceeding 50°C)Pressure pump set
See page 16
For original Maidaid® chemicals see page 52
Q900016Q900020Q900100Q900104
Q904001 (Brass Head)Q904002 (Cast Iron Head)
Q904006
149195545845
245125325
GENERAL FEATURES■ 2 year warranty
■ Constructed of heavy gauge stainless steel – built to last
■ Soft touch controls, twin digital temperature displays
■ Proven electronic controls
■ All MH models have fitted breaktank (type “A” air gap) as standard(ideal for Health Care market)
■ Double skinned insulated hood for reduced noise and heat retention
■ Powerful wash pump to shift stubborn deposits
■ Moulded wash tank enables easy cleaning
■ Surface tray filters – to prevent debris from contaminating wash water
■ Double skin – for low noise in operation and heat conservation
■ Self draining wash pump – to reduce health risk from bacteria build up
■ 3 adjustable cycle times
■ Built-in rinse aid dispenser
■ Thermostop system on all models to ensure rinse temperatures forgood results
■ Supplied with 1 cup & 1 plate 500 x 500mm racks
TECHNICAL FEATURES■ Voltage – Model MH2040 240V single phase or 415V three phase
(converted to order or on site) – Model MH2050 415V three phase
■ Water supply pressure – minimum 2 atm / maximum 4 atm
■ Wash tank temperature – 55°C (adjustable)
■ Rinse boiler temperature – 85°C (adjustable)
CERTIFICATION■ WRAS
MH2040* MH2050*
*shown with tabling – not included
5,710
6,105
250
250
250
15
C RANGE, D RANGE AND EVOLUTION RANGE – PASS THROUGH DISHWASHER TABLING
Item Description Part No.
Pre-wash Spray Arms Pre-wash spray arm: Single feed – hot or cold spray arm Q900500Pre-wash spray arm: Single feed – hot or cold spray arm with stem tap Q900501Pre-wash spray arm: Monoblock spray arm – hot & cold Q900505Pre-wash spray arm: Monoblock spray arm – hot & cold with stem tap Q900506Pre-wash spray arm: Twin pillar spray arm – hot & cold Q900510Pre-wash spray arm: Twin pillar spray arm – hot & cold with stem tap Q900511
Additional Tabling A range of tabling is available to order – see page 53 for full details
FEATURES■ All tabling is suitable for 500 x 500mm racks
■ Supplied flat packed for easy assembly
■ Available left or right hand arrangement – must be specified
■ All legs supplied with height adjustable feet
■ Tables including sinks have single 3⁄4" hole for monobloc spray armand 1 1⁄2" waste
■ All sinks are 500mm wide x 400mm front to back x 250mm deep
■ All tables with spashback are 745mm deep
80200 (Right hand)
80201 (Left hand)
80205 (Left hand)
80206 (Right hand)
80203 (Left hand)
80204 (Right hand)
717000
Closed end table c/w splashback andundershelf. 700mm long. (Right hand asIllustrated)
Closed end table c/w undershelf. 700mm long,615mm deep
Closed end table c/w splashback andundershelf. 1200mm long. (Right hand asillustrated)
Stainless steel scrap bin c/w castors and lid
Closed end table c/w splashback, undershelfand sink. 1200mm long. (Right hand asillustrated)
Closed end table c/w splashback, shortundershelf, sink and scrap hole. 1200mm long. (Right hand as illustrated)
80207 (Left hand)
80208 (Right hand)
704002
Q900511
Pre-wash spray arm: Twin pillar spray arm –hot & cold water feed with stem tap
Q900505
Pre-wash spray arm: Monoblock spray arm –hot & cold water feed
16
Item Description Part No. Price£
Pre-wash Spray Arms Pre-wash spray arm: Single feed – hot or cold spray arm Q900500 220Pre-wash spray arm: Single feed – hot or cold spray arm with stem tap Q900501 270Pre-wash spray arm: Monoblock spray arm – hot & cold Q900505 270Pre-wash spray arm: Monoblock spray arm – hot & cold with stem tap Q900506 320Pre-wash spray arm: Twin pillar spray arm – hot & cold Q900510 270Pre-wash spray arm: Twin pillar spray arm – hot & cold with stem tap Q900511 320
Additional Tabling A range of tabling is available to order – see page 53 for full details
FEATURES■ All tabling is suitable for 500 x 500mm racks
■ Supplied flat packed for easy assembly
■ Available left or right hand arrangement – must be specified
■ All legs supplied with height adjustable feet
■ Tables including sinks have single 3⁄4" hole for monobloc spray armand 1 1⁄2" waste
■ All sinks are 500mm wide x 400mm front to back x 250mm deep
HAL T28 HAL T34B (1200mm)
HAL A10HAL T35
HAL T34A (700mm)
Simple open ended table with under shelf.510 x 610mm long
Closed end table.Available 700 or 1200mm long
Closed end table. Left or right hand version.Standard length 1200mm. Other lengthsavailable
Simple shelf that secures to either side of machine.510 x 600mm long shelf
Corner Table Table c/w sink and undershelf. 1200mm
HAL T50
HAL T10
MH RANGE – PASS THROUGH DISHWASHER TABLING
Q900511
Pre-wash spray arm: Twin pillar spray arm –hot & cold water feed with stem tap
Q900505
Pre-wash spray arm: Monoblock spray arm –hot & cold water feed
17
MINIRACK – SINGLE TANK DISHWASHERS
AncillariesItem Detail Part No. Price £
Minirack Dryer Electric drying module. Adds 600mm to length of Minirack. 915028 4,9301150 cubic metres of air an hour, 400 watt fan. 6 kW of heating power
Minirack Steam Condenser Electric fan, 200 watt. 700 cubic metres of air an hour. Consumes 250 litres of 915029 3,435cold water per hour. No increase to length of machine. Reduces steam released into the working environment. Suitable for hot fill machines only
Minirack Heat Recovery and For cold water feed machines only. Electric fan, 200 watt. 700 cubic metres of air 915030 3,520Steam Condenser an hour. No increase to length of machine. Reduces steam released into the working
environment. Converts potentially wasted energy into 5 kW of power to pre-heat the incoming water and reduces the power required to run a cold fill machine
Model Detail Racks Dimensions mm Power Amps Priceper Hour W x D x H kW per Phase £
R3000 Hot fill 50 – 100 1150 x 770 x 1565 16 22
R3000 C Cold fill 50 – 100 1150 x 770 x 1565 25 36
R3002 Three speed – hot fill 50 – 100 – 130 1150 x 770 x 1565 18 26
R3002 C Three speed – cold fill 50 – 100 – 130 1150 x 770 x 1565 27 38
Dosing Optional fitted peristaltic dosing pumps for detergent and rinse aid – –
Breaktank Optional fitted breaktank – – – –
MH101232 Handed wing splash guard (supplied as part of exit roller tabling, see page 19)
MH101233 Handed wing splash guard (supplied as part of exit roller tabling, see page 19)
R3002 (Illustration shown with tabling – not included)
R3000 (Illustration shown with tabling – not included)
■ Full width door for maximum access
■ Low noise levels for operator comfort
■ Optional breaktank available
■ A Minirack model is also available for volume washing of glasses
TECHNICAL FEATURES – EXCLUDING DRYER■ Voltage 415V – 3 phase and neutral
■ 16 to 18 kW – 50°C water supply (dependant on model)
■ 25 to 27 kW – 15°C water supply (dependant on model)
■ Water supply 1.5 to 4 bar
■ Potential of 5 kW energy saving with heat recovery unit
GENERAL FEATURES■ From 50 to 130 racks per hour
■ From 900 to 2350 dishes per hour
■ Inline or corner dryer option
■ Designed to minimise running costs
■ Reversible direction on models R3000 & R3002
■ All models use 500mm square baskets with a useable height of 400mm
■ Digital temperature display
■ Self draining wash pump – to reduce the possible build up of bacteria
■ Stainless steel scrap tray – prevents solids fouling wash water
■ Wash and rinse economisers – energy saving as wash/rinse action stopsafter short non-use delay
■ Supremely designed for ease of daily cleaning
■ Latest water blade technology for improved wash performance
■ As little as 1.8 litres used per rack
■ Water consumption up to 35% less than pass through machines
■ ‘Smart’ electronic colour coded interface
10,410
10,665
12,210
12,505
510
570
59
59
18
MINIRACK – DUAL TANK DISHWASHERS
AncillariesItem Detail Part No. Price £
Minirack Dryer Electric drying module. Adds 600mm to length of Minirack. 915028 4,9301150 cubic metres of air an hour, 400 watt fan. 6 kW of heating power
Minirack Steam Condenser Electric fan, 200 watt. 700 cubic metres of air an hour. Consumes 250 litres of 915029 3,435cold water per hour. No increase to length of machine. Reduces steam released into the working environment. Suitable for hot fill machines only
Minirack Heat Recovery and For cold water feed machines only. Electric fan, 200 watt. 700 cubic metres of air 915030 3,520Steam Condenser an hour. No increase to length of machine. Reduces steam released into the working
environment. Converts potentially wasted energy into 5 kW of power to pre-heat the incoming water and reduces the power required to run a cold fill machine
Model Detail Racks Dimensions mm Power Amps Priceper Hour W x D x H kW per Phase £
R3003 Three speed, prewash – hot fill 65 – 130 – 170 1970 x 770 x 1565 21 30
R3003 C Three speed, prewash – cold fill 65 – 130 – 170 1970 x 770 x 1565 31 44
R3004 Three speed, prewash – hot fill 85 – 170 – 220 1970 x 770 x 1565 24 34
R3004 C Three speed, prewash – cold fill 85 – 170 – 220 1970 x 770 x 1565 34 48
Dosing Optional fitted peristaltic dosing pumps for detergent and rinse aid – –
Breaktank Optional fitted breaktank – – – –
MH101232 Handed wing splash guard (supplied as part of exit roller tabling, see page 19)
MH101233 Handed wing splash guard (supplied as part of exit roller tabling, see page 19)
R3004(Illustration shown with Minirackdryer and tabling – not included)
R3003(Illustration shown with tabling – not included)
■ Latest water blade technology for improved wash performance
■ As little as 1.8 liters used per rack
■ Water consumption up to 35% less than pass through machines
■ ‘Smart’ electronic colour coded interface
TECHNICAL FEATURES – EXCLUDING DRYER■ Voltage 415V – 3 phase + neutral
■ 21 to 24 kW – 50°C water supply
■ 31 to 34 kW – 15°C water supply
■ Water supply 1.5 to 4 bar
■ Potential of 5 kW energy saving with heat recovery unit
GENERAL FEATURES■ From 65 to 220 racks per hour
■ From 1200 to 4000 dishes per hour
■ Inline prewash as standard or corner prewash option available. Both deliver 400 litres pre minute of additional wash performance
■ Inline or corner dryer options
■ Designed to minimise running costs
■ All models use 500mm square baskets with a useable height of 400mm
■ Digital temperature display
■ Self draining wash pump – to reduce the possible build up of bacteria
■ Stainless steel scrap tray – prevents solids fouling wash water
■ Wash and rinse economisers –energy saving as wash/rinse action stopsafter short non-use delay
■ Supremely designed for ease of daily cleaning
■ Designed to minimise running costs
17,910
18,205
19,565
19,865
510
570
59
59
19
MINIRACK – TABLING
FEATURES■ All tabling is suitable for 500 x 500mm racks
■ Supplied flat packed for easy assembly
■ Available left or right hand arrangement – must be specified
■ All legs supplied with height adjustable feet
■ Tables including sinks have single 3⁄4" hole for monobloc spray armand 1 1⁄2" waste
■ All sinks are 500mm wide x 400mm front to back x 250mm deep
An additional range of tabling is available to order – see page 53 for full details
75500
75484 (700mm)
75485 (1100mm)
75482 (700mm)
75483 (1100mm)
Mechanised rack feed corner unit, links tomachines rack drive. Left or right hand.600 x 650mm
Inlet or outlet table, c/w undershelf. 700 or 1100mm long, 600mm deep
Outlet table for unit with drying module only,c/w under shelf. 700 or 1100mm long, 600mm deep
90 degree powered exit table. 800 x 800mm
Roller exit table, c/w drain and legs. 1100, 1600 or 2100mm long, 630mm deepincludes pair of splash guards
717066 (1100mm)
717067 (1600mm)
717086 (2100mm) 717068
90 degree curved exit roller table, c/w drain and legs. 1100 x 1100mm
Inlet table c/w drain and short splashback.1200, 1500 or 1800mm long, 700mm deep.(Right hand as illustrated)
For Left hand inlet:
75451 (1200mm)
75452 (1500mm)
75453 (1800mm)
For Right hand inlet:
75456 (1200mm)
75457 (1500mm)
75458 (1800mm)
650600
75480 (Left hand)
75481 (Right hand)
Q900511
Pre-wash spray arm:Twin pillar spray arm –hot & cold water feedwith stem tap
Q900505
Pre-wash spray arm:Monoblock sprayarm – hot & coldwater feed
20
RACK CONVEYORS
■ Modules available for: Prewash, wash or double wash, rinse or double rinse
■ Five dryer options
■ Two heat recovery options
■ Splash guards and steam condensers
Please note: Rack conveyors are not supplied with rinse aid or detergent dosing as standard,
details available on request
FEATURES■ Proven rugged design and reliability that can be tailored to your
specification to solve all volume rack ware-washing requirements
■ Easy to use with minimum staff training
■ Fifteen basic models offering electric or steam heating.
■ Capacity to process 80 to 306 500mm racks per hour
KEY
1 Prewash
2 1st wash
3 Power wash
4 Steam condenser andenergy recovery
5 Power rinse
6 Final rinse
7 Drying
Speak to your Area Sales Manager for a free site survey and quotation relating to your precise site requirements.
1 2 3
4
5 6 7
21
RACK CONVEYORS
1800
RR W
Model Racks Machine Power Amps Pre- Double Main Double ReinforcedPer Hour Length kW per Phase wash Wash Wash Rinse Double
mm Section Rinse
AX 220 80 to 110 1800 23 33 – – Yes Yes –
Note: All models are 750mm deep and the height can be adjusted between 1770 and 2200mm
AX 220 – Reinforced washing system/double rinsing
AX 220
2R W
2000
22
RACK CONVEYORS
Model Racks Machine Power Amps Pre- Double Main Double ReinforcedPer Hour Length kW per Phase wash Wash Wash Rinse Double
mm Section Rinse
AX 250 110 to 140 2000 32.4 46 – – Yes – Yes
Note: All models are 750mm deep and the height can be adjusted between 1770 and 2200mm
AX 250 – Reinforced washing system/double rinsing
AX 250 – (shown with optional
dryer unit – not included)
23
RACK CONVEYORS
AX 310 – Reinforced prewash system/reinforced washing/ double rinsing
AX 310 – (shown with optional corner prewash and inlet sink table, not included)
Model Racks Machine Power Amps Pre- Double Main Double ReinforcedPer Hour Length kW per Phase wash Wash Wash Rinse Double
mm Section Rinse
AX 310 140 to 190 2400 32.8 46 Yes – Yes Yes –
Note: All models are 750mm deep and the height can be adjusted between 1770 and 2200mm
2400
RR W P
AX 330 – Reinforced prewash system/reinforced washing/ double rinsing
AX 330 – (shown with optional dryer and inlet extension, not included)
24
RACK CONVEYORS
Model Racks Machine Power Amps Pre- Double Main Double ReinforcedPer Hour Length kW per Phase wash Wash Wash Rinse Double
mm Section Rinse
AX 330 180 to 240 2700 37 52 – Yes Yes Yes –
Note: All models are 750mm deep and the height can be adjusted between 1770 and 2200mm
2700
RR W W
25
RACK CONVEYORS
6000
2R W PW
AX 540 – Reinforced prewash system/double reinforced washing/ double rinsing
AX 540 – (shown with optional dryer and steam condenser units, not included)
Model Racks Machine Power Amps Pre- Double Main Double ReinforcedPer Hour Length kW per Phase wash Wash Wash Rinse Double
mm Section Rinse
AX 540 230 to 310 3500 50.3 71 Yes Yes Yes – Yes
Note: All models are 750mm deep and the height can be adjusted between 1770 and 2200mm
26
RACK CONVEYOR ACCESSORIES
Compatible Accessories AX 220 AX 250 AX 310 AX 330 AX 540
LC90 6kW shelf dryer 600mm long Yes Yes Yes – –
LC90/2 12kW shelf dryer 600mm long Yes Yes Yes Yes Yes
LC90/900 12kW shelf dryer 900mm long Yes Yes Yes Yes Yes
LC91 Steam condenser Yes Yes Yes Yes Yes
TR91 Compact heat recovery Yes Yes – – –
TR91 Compact heat recovery – – Yes Yes Yes
TR98 Heat recovery – – Yes – –
TR98 Heat recovery – – Yes Yes
TR99/1 Heat recovery and heat pump – – Yes Yes Yes
Additional boiler for cold fill. Yes Yes Yes Yes YesNot required for units with heat recovery units. Adds 12kW to the machine loading.
Shelf dryer – optimises water removalfrom any surface
LC90 6kW shelf dryer 600mm long
LC90/2 12kW shelf dryer 600mm long
Shelf dryer – optimises water removalfrom any surface
LC90/900 12kW shelf dryer 900mm long
Heat recovery – recovers the heat producedby cold water machines to heat the coldwater input to approx 45°C
TR98 Heat recovery
TR98 Heat recovery TR99/1 Heat recovery
Heat recovery with heat pump – recovers theheat produced by cold water machines toheat the cold water input to approx 65°C
Compact heat recovery
TR91 Compact heat recovery
TR91 Compact heat recovery
Steam condenser – recommended whenmachine is installed in low-ventilation area
LC91 Steam condenser
27
RACK CONVEYOR – TABLING
Plain table with under shelf 1200 x 590 x 850mm
T 35
Plain corner table 550 x 550 x 850mm
A 10
Grading table 1600 x 1050 x 850mm
TC 16
Shelf for 1600mm grading table
M 16
Grading table 2400 x 1050 x 850mm
TC 24
Shelf for 2400mm grading table
M 24
Grading table c/w mechanised basketadvance 1800 x 1450 x 1700mm
RTC 18
Grading table c/w mechanised basketadvance 2400 x 1450 x 1700mm
RTC 24
Plain table c/w sink and splash back 1200 x 730 x 850mm
T 55 ,
Plain table c/w sink, scrap hole and splashback 1500 x 730 x 850mm
T 80
Plain table c/w sink, scrap hole and splashback 1800 x 730 x 850mm
T 90
Stub roller table c/w drain tank and end stopmicroswitch 1100 x 650 x 850mm
LC 96/1
28
Stub roller table c/w drain tank and end stopmicroswitch 1600 x 650 x 850mm
LC 96/1A
90° curved gravity roller table 1300 x 1300 x 850mm
LC 97
90° mechanised curve – driven by rackmachine 850 x 850 x 850mm
LC 77/2
90° mechanised curve – self driven 850 x 850 x 850mm
LC 97/2
180° mechanised curve – self driven 850 x 1500 x 850mm
LC 97/3
90° loading table – driven by rack machine 700 x 610 x 900mm
LC98
RACK CONVEYOR – TABLING
Open basket 500 x 500mm
Z972001
Open basket – close meshed base for cutlery 500 x 500mm
Z972002
Plate basket 500 x 500mm
Z972003
Tray basket 500 x 500mm
Z972030
Cutlery 8 compartment insert basket
Z972032
A comprehensive range of baskets are
available including:height extenders, section dividers,
inclined base inserts and storage trolleys.
29
FLIGHT MACHINES
■ Modules available for: Prewash, single to quadruple wash, rinse or double rinse
■ Two dryer options
■ Two heat recovery options
■ Splash guards, neutral zone and steam condensers
FEATURES■ For the heaviest ware-washing requirements, conveyor designed for
continuous operation
■ Easy to use with minimum staff training
■ Eight basic models offering electric or steam heating
■ Capacity to process 2,400 to 10,000 plates per hour with conveyorspeeds of 0.8 to 3.3 metres per minute
KEY
1 Inlet zone
2 Prewash
3 Power wash
4 Double rinse
5 Heat recoverywith heat pump
6 Stage dryer
7 Turboblower
8 Shelf dryer
9 Outlet zone
Speak to your Area Sales Manager for a free site survey and quotation relating to your precise site requirements.
1
2 3 3 4 6 8
7 9
5
30
UTENSIL/POT WASHERS
Wash Tank Filling
Rinse Boiler Filling
Rinsing at 85°C
Thermorinse
TECHNICAL FEATURES■ Voltage 415V – three phase + neutral
■ Water supply pressure – 2 to 4 bar
■ Wash tank temperature – 55°C (adjustable)
■ Rinse boiler temperature – 85°C (adjustable)
GENERAL FEATURES■ New advanced design, ‘Smart’ soft touch electronic user interface
■ Self-diagnostics across the range
■ Reduced width, plus increased maximum product height
■ Rinse aid and detergent pumps fitted as standard
■ Eleven wash cycles from 2 to 12 minutes
■ MRT – Maidaid® Rinse Technology with breaktank
■ Stainless steel, double wall construction with stainless steel chassis
■ Vertically mounted wash pump – self draining
■ Carefully designed moulded wash tank
■ Internal pressure boosting pump
■ Stainless steel wash and rinse arms
■ Split door for easy access, lower section double skinned
■ Stainless steel sliding rack
■ All utensil/pot washers are supplied with one standard open basket rack
■ Tray holders and cutlery insets illustrated are available separately
■ U132e has twin 3 kW wash pumps
■ U132e has option of split chamber operation
■ All models have self cleaning cycle
Model Rack size Maximum useable Dimensions mm Cycle Time Power Ampsmm height mm W x D x H Min kW per phase
U61e 610 x 550 650 720 x 780 x 1700 / 1760 2 to 12 7.4 11
U61He 610 x 550 850 720 x 780 x 1900 / 1960 2 to 12 8 12
U70e 700 x 700 850 850 x 850 x 1900 / 1960 2 to 12 11 16
U132e 1320 x 700 850 1470 x 850 x 1900 / 1960 2 to 12 15.5 22
U61e U61He U70e U132e
31
GRANULAR POT WASHER
■ Fanned ventilation to minimise steam spillage at cycle end
■ Full range of pots, tray and utensil holders available
■ Supplied with baskets
■ Rinse aid dispenser fitted as standard
■ Detergent dispenser option available
■ Use of original granules recommended
TECHNICAL FEATURES – EXCLUDING DRYER■ Voltage 415V – three phase + neutral
■ Water supply pressure – 2 to 4 bar
■ 12.5 kW – 50 deg C
GENERAL FEATURES■ High performance, driven granules wash power
■ Eliminates pre-soaking of dirty pots and pans
■ Five adjustable cycle times with or without granules
■ Simple electronic controls with self-diagnostics
■ Twin temperature display
■ Double wall body with full high performance thermo-acousticinsulation
■ Split door construction
■ Super powerful 3 kW wash pump with AISI 316 stainless bodyand impellor
■ Vertically mounted stainless wash and rinse arms
■ Rotating wash basket, motor driven through safety clutch
■ Easy clean moulded wash tank
■ Easily accessed granules collection basket
Model Basket Maximum useable Dimensions mm Cycle timesheight mm W x D x H Min
MH GRANULAR 730Ø 600 1100 x 908 x 1900/2250 4,6,8,10,12
DET GP Additional charge for fitted detergent pump
Cold Fill Additional charge for fitted cold water element
AncillariesItem Part No.
Granules – Bucket of 9 kgs Q108137
Round basket for 6 No. GN 1/1 or 2 No. 2/1 (One supplied with machine) Q108138
Tray stand for 10 No. GN1/1 (One supplied with machine) Q108139
Tray stand for 4 No. 600 x 400 x 20 & 4 No. 600 x 400 x 50 (One supplied with machine) Q108140
Stand for spatula basket (One supplied with machine) Q108141
Spatula/utensil basket (One supplied with machine) Q108142
Small pots and frying pans support (One supplied with machine) Q108143
Larger pots support (One supplied with machine) Q108144
Service trolley for loading/unloading Q108145
MH GRANULAR
MH GRANULAR Illustration shown with roundbasket (included with machine) and service trolley (not included)
32
TECHNICAL FEATURES■ Voltage 240V – single phase – 13 amp power supply
■ 1 to 6 bar operating water pressure
■ Ambient room temperature between 10º to 25°C required(optimum 20°C)
■ Water supply temperature between 3º to 20°C required (optimum 10°C)
■ All models produce 18g cube except M22-5 (13g cube)
GENERAL FEATURES■ 3 year warranty
■ Unique spray system technology minimizes scaling and producesseparate, crystal clear, slow-melting ice cubes
■ WRC regulations compliant
■ Non toxic, fully insulated, easy clean storage bins made from tough ABS plastic
■ Extra low temperatures allow ice cube to last longer (minus 25°C)
■ Adjustable feet
■ Environmentally friendly refrigerant – R404A
■ Water-cooled version for room temperature above ambient rangeavailable for all models for the same price as air-cooled version(excluding M22-5)
Model Production Bin Storage Dimensions mm Waste Height WaterKgs per Capacity Capacity W x D x H inc. feet Consumption24hrs Kgs (inc. feet) (mm) Litres/Kg
M22-5 21 5 310 x 13g 345 x 400 x 595 130 4.5
M30-10 28 10 530 x 18g 390 x 460 x 695 130 5.1
M34-16 34 16 950 x 18g 500 x 580 x 790 251 3.3
M42-16 42 16 950 x 18g 500 x 580 x 790 251 4.0
M50-25 48 25 1470 x 18g 500 x 580 x 900 251 4.0
M65-40 65 40 2350 x 18g 738 x 600 x 1020 340 2.8
M90-55 90 55 3240 x 18g 738 x 600 x 1120 340 2.5
M130-65 130 65 3830 x 18g 840 x 740 x 1175 345 2.8
M155-65 155 65 3830 x 18g 840 x 740 x 1175 345 2.6
AncillariesItem Part No.
Miniphos Scale Inhibitor (inline filter for M130/65 – see Modular section) Q900400
Miniphos Refill Marble and Filter Pack Q900401
Inline Filter Kit – GS6 PH-C QRF & 2 QR Hoses Q907212
Replacement Filter – GS6 PH-C QRF Q907213
Drain/condensate pump Q904200
M22-5 M30-10 M34-16 M42-16 M50-25
M65-40 M90-55 M130-65 M155-65
ICEMAKERS ICE CUBE >
33
TECHNICAL FEATURES■ Voltage 240V – single phase
– see full technical leafletfor power requirements
■ 1 to 6 bar operating waterpressure
■ Three ice cube weights: (for MC range):13 gram – 18 gram – 33 gram
■ Ambient room temperaturebetween 10º to 25°C required(optimum 20°C)
■ Water supply temperature between 3º to 20°C required (optimum 10°C)
GENERAL FEATURES■ Unique spray system technology minimizes scaling and produces
separate, crystal clear, ice cubes
■ MC300 produces dense, slow melting, 18 gram ice cubes (as standard)
■ MVM500 uses vertical evaporator and produces a 7 gram ice cube,particularly suited for fast food outlets or with carbonated drinks
■ WRC regulations compliant
■ Extra low temperatures allow ice cube to last longer (minus 25°C)
■ Environmentally friendly refrigerant – R404A
■ Water-cooled versions for high ambient temperatures available at same price
■ An ice storage bin is required with all models (see page 37)
Model Production Ice Cube Dimensions mm Waste Height Gross Water MaximumKgs per Size W x D x H (mm) Weight Consumption Power**24hrs (Gram) Air Cooled Kgs Litres/Kg kW (Amps)
Air Cooled
MVM350 140 7 540 x 544 x 707 42* 85 2.8 2.4 (11)
MVM500 225 7 770 x 550 x 805 40* 90 2.5 3.2 (14)
MVM900 400 7 770 x 550 x 805 40* 113 1.8 5.3 (23)
MC80 90 18/33/13 862 x 470 x 620 226* 83 2.2 1.7 (7)
MC150 155 18/33/13 862 x 555 x 720 297* 118 2.6 2.7 (12)
MC300 300 18/33/13 1250 x 580 x 848 29* 152 2.6 5.3 (23)
* To this height must be added height of storage bin upon which the icemaker is mounted.** Maximum power is required only during the ice harvest cycle, during ice production power requirements will be approximately half the maximum.
AncillariesItem Part No.
Inline Filter Kit – GS6 PH-C QRF & 2 QR Hoses Q907212
Replacement Filter – GS6 PH-C QRF Q907213
Drain/condensate pump Q904200
MVM350MVM500 MVM900
MC150
MC80
MC300
Don’t forget to order yourStorage Bin
– see page 37 for options.
< MINI ICE CUBE(FAST ICE)
< STANDARDICE CUBE
MODULAR ICE CUBE MAKERS
34
PEBBLE ICEMAKERS
Model Production Bin Dimensions mm Waste Height Gross WaterKgs per Capacity W x D x H inc. feet Weight Consumption24hrs Kgs (inc. feet) (mm) Kgs Litres/Kg
MTB852 85 20 500 x 660 x 800 168 67 1 (Air) 6.3 (Water)
MTB1405 140 50 738 x 690 x 1130 360 105 1 (Air) 6.4 (Water)
MTM450 440 N/A 640 x 470 x 700* 228* 113* 1 (Air) 5.3 (Water)
* Applies to production unit only
TECHNICAL FEATURES■ Voltage 240V – single phase
■ Free standing models 13 amp power supply
■ Modular MTM450 16 amp power supply
■ 1 to 6 bar water supply pressure
■ Ambient room temperature between 10° and 43° C (higher temperaturefor water cooled, optimum performance at 21° C)
■ Water supply temperature between 3° and 32° C (optimum 10° C)
GENERAL FEATURES■ Three new models designed to meet the current demand for smaller
individual pieces of ice
■ Produces pebble ice – an irregular shaped ice, between cubes andgranular ice
■ Ideal for presenting breakfast fruits, yoghurts and all seafood
■ An ideal mixer for cocktails, cubes can be too big and granular/crushedice turns the drinks to slush
■ Two free standing models MTB 852 and MTB1405 and one modularproduction unit MTM450
■ The modular unit is suitable for use with Maidaid® bins
■ WRC regulations complaint
■ Environmentally friendly refrigerant – R404A
■ Adjustable feet on stand-alone models
■ Water-cooled versions for high ambient temperatures available at the same list price as below
PEBBLES >
AncillariesItem Part No.
Miniphos Scale Inhibitor Q900400
Miniphos Refill Marble and Filter Pack Q900401
Inline Filter Kit – GS6 PH-C QRF & 2 QR Hoses Q907212
Replacement Filter – GS6 PH-C QRF Q907213
MTB852
MTB1405
MTM450
35
GRANULAR ICEMAKERS
MF90-20
MF150-40
MF150-55
TECHNICAL FEATURES■ Voltage 240V – single phase – 13 amp power supply
■ 1 to 6 bar operating water pressure
■ Ambient room temperature between 10º to 25°C required(optimum 20°C)
■ Water supply temperature between 3º to 20°C required (optimum 10°C)
GENERAL FEATURES■ Unique spray system technology minimizes scaling and produces
separate, crystal clear ice
■ Compact granular ice for many uses in bars, restaurants, fresh fooddisplays, chemical and pharmaceutical industries.
■ WRC regulations compliant
■ Non toxic, fully insulated, easy clean storage bins made from tough ABS plastic
■ Extra low temperatures allows ice to last longer (minus 25°C)
■ Adjustable feet
■ Environmentally friendly refrigerant – R404A
■ Water-cooled versions for high ambient temperatures available at same price
Model Production Bin Dimensions mm Waste Height Gross WaterKgs per Capacity W x D x H inc. feet Weight Consumption24hrs Kgs (inc. feet) (mm) Kgs Litres/Kg
MF90-20 90 20 500 x 660 x 900 361 59 1
MF150-40 150 40 738 x 690 x 1020 340 85 1
MF150-55 150 55 738 x 690 x 1120 340 94 1
AncillariesItem Part No.
Miniphos Scale Inhibitor Q900400
Miniphos Refill Marble and Filter Pack Q900401
Inline Filter Kit – GS6 PH-C QRF & 2 QR Hoses Q907212
Replacement Filter – GS6 PH-C QRF Q907213
< GRANULAR ICE
TECHNICAL FEATURES■ Voltage 240V – single phase
– 13 to 25 amp power supply■ 1 to 6 bar operating water
pressure■ Ambient room temperature
between 10º to 43°C required (optimum 20°C)
■ Water supply temperaturebetween 3º to 32°C required(optimum 10°C)
■ MG and MM models are all available either air or water cooled
36
MG250
MG500
MM350
MM800
MG1000
GENERAL FEATURES■ MG models – Compact granular ice: Many applications for
restaurants, fish displays & transport, self-service and industry
■ MM models – Flat flake ice – sub cooled: Applications in fishand dairy industries
■ Modular models will require a collection / storage bin (see page 37)
Model Production Dimensions mm Waste Height Gross Water MaximumKgs per W x D x H (mm) Weight Consumption Power**24hrs Air Cooled Kgs Litres/Kg kW (Amps)
Air Cooled
MG250 250 640 x 470 x 700 228* 82 1 1.9 (8)
MG500 500 640 x 470 x 700 228* 104 1 2.7 (12)
MG1000 1000 934 x 684 x 700 60* 172 1 5.7 (24)
MM350 320 900 x 588 x 705 60* 127 1 2.1 (9)
MM800 850 1107 x 700 x 880 65* 290 1 4.6 (20)
* To this height must be added height of storage bin upon which the icemaker is mounted.** Maximum power is required only during the ice harvest cycle, during ice production power requirements will be approximately half the maximum.
Don’t forget to order yourStorage Bin
– see page 37 for options.
FLAT >GRANULAR >MODULAR GRANULAR &FLAT ICEMAKERS
37
MODULAR ICEMAKERS – STORAGE BINS
ROLLER BIN – TECHNICAL FEATURES■ All models are constructed from two main components
■ 18/8 stainless steel supporting frame which supports the Icemaker and ice collection bin while trolleys are out of the parked position
■ Trolleys for the collection and transportation of the ice are moulded in food safe polyethylene and are highly insulated for prolonged ice storage
■ All storage bins have a drain fitting as standard
Model Storage Dimensions mm Suitable Capacity W x D x H IcemakerKgs (inc. feet) Models
M240PE 240 942 x 795 x 1153 MC80/MC150, MVM350, MVM500/900, MG280/500
MT200 200 870 x 780 x 1000 MC80, MC150, MVM350/500/900, MG250/500, MM350
MT350 350 1250 x 790 x 1000 MC150/300, MVM500/900, MG250/500, MM350/800
Bay Trolley
MR100 17 108 795 x 970 x 1284 MG250/500
MDR100 50 108 x 2 1560 x 970 x 2204 to 2158 MG250/500, MC150, MC300, MVM500/900, MG250/500,MG250/500 (Double), MM350, MM800
MDR500 300 108 x 2 1560 x 1070 x 2660 to 2454 MM800, MM800 (Split), MG1000, MG500 (Double)
M240PE MT200
The popular combination of theMVM350 on a M240PE storage bin
MT350
MR100MDR100
MDR500
GENERAL FEATURES■ Bin M240PE – moulded in food safe
polyethylene, highly insulated
■ Bin MT range are all manufactured in18/8 scotch brite stainless steel and arehighly insulated for long life ice
■ Suitable for all types of Maidaid®
Modular Icemakers
38
Model Colour External Internal Capacity Power Doors Shelves PriceDimensions mm Dimensions mm 330ml Bottles W £
W x D x H W x D x H
HB600 Silver 600 x 520 x 900 520 x 385 x 750 95 160 1 2 545
HB600B Black 600 x 520 x 900 520 x 385 x 750 95 160 1 2 545
HB900 Silver 900 x 520 x 900 820 x 385 x 750 145 180 2 4 675
HB900B Black 900 x 520 x 900 820 x 385 x 750 145 180 2 4 675
HB600 HB600B
HB900BHB900
TECHNICAL FEATURES■ Voltage 240V – single phase – 13 amp supply
■ Temperature range +3 / + 7°C
■ Insulation – 25mm polystyrene foam (CFC free)
■ Refrigerant – R134a (CFC free)
GENERAL FEATURES■ Robust construction
■ Self closing doors
■ Lockable doors
■ Double glazed
■ Interior lights
■ Fan assisted
■ Adjustable shelves
HALCYON® RANGE – BOTTLE COOLERS
39
HB1200SS
Model Colour External Internal Capacity Power Doors Shelves PriceDimensions mm Dimensions mm 330ml Bottles W £
W x D x H W x D x H
HB1200SS Stainless steel 1200 x 514 x 907 1136 x 432 x 728 285 180 2 4 1,395
TECHNICAL FEATURES■ Voltage 240V – single phase – 13 amp supply
■ Temperature range +2 / +10ºC
■ Insulation – 32mm cyclopentane
■ Refrigerant – R134a (CFC free)
■ High quality Danfoss compressor
■ High quality EBM fan motor
■ Fin Block evaporator
■ Fin block condensor
■ LED temperature control
GENERAL FEATURES■ Robust construction
■ Stainless steel door surround
■ Self closing
■ Lockable
■ Double glazed
■ Forced air cooling
■ Adjustable shelves
■ Interior lights
■ Stainless steel interior
■ Stainless steel welded vap tray used
■ Copper vaporiser is coated to avoid corrosion
■ Special coating on evaporator fins inhibits corrosionand aids defrosting
■ Easy to clean up spillages inside cabinet
HALCYON® RANGE – BOTTLE COOLERS
40
BEZZERA ESPRESSO COFFEE MACHINES – BZ RANGE
Ancillaries & OptionsItem Variants Part No. Cases
Water Treatment(essential to limit scaling)
Cleaning Powder
Knock-out Draw(see page 49)
Cappuccino Kit
Replacement water tank softener (for ESPBZ02S only)25 litres at 14 degrees Clarke capacity(volume prices available)
Box of 10 sachets of head cleaning powder (1⁄2 sachet per head)
SingleDouble
Stainless steel 20 oz milk jug, chocolate shaker, clip-on milk thermometer, milk spatula, shot glass and instructions
–
–
––
–
Q103419
Z802106
Q907001Q907002
Q907010
ESPBZ02S
Coffee: EspressopotItem Variants Part No. No. of Cases
Premium Blend(see page 48)
Decaffeinated(see page 48)
Case of 150 Premium pots (blend 80% Arabica / 20 % Robusta)
Case of 150 Decaffeinated blend pots
136
13 6
ESPPOTS1
ESPPOTS2
■ Machine will automatically stop if water level drops too low■ ESPBZ02S manual operation■ BZ07DE automatic with two progammable doses and one
manual dose buttons
TECHNICAL FEATURES■ Voltage – 240V single phase ■ Boiler capacity 1.5 litres (on both models)■ Water reservoir capacity:
ESPBZ02S 4 litres, BZ07DE 3 litres
GENERAL FEATURES■ Compact single group, ideal for small coffee production –
small restaurants & bars ■ 12 months ‘return to base’ parts and labour warranty*■ Easy to use■ No waste, no mess using Bezzera freshly sealed Espressopots ■ Hot water font & steam arm■ Manually filled water reservoir, supplied with mini water filter
(change regularly for optimum results)■ Electrical heating
Model Type No. of Handles Dimensions mm Boiler Power AmpsGroups Single/Double W x D x H Capacity kW
ESPBZ02S Espressopot version 1 S 360 x 425 x 360 1.5 lt. 1.2 13
BZ07DE Automatic 1 D 250 x 425 x 375 1.5 lt. 1.3 13
BZ07DE
* Our standard warranty is a 12 month ‘return to base’ warranty. Return shipping costs must be met by the buyer.
41
BEZZERA ESPRESSO COFFEE MACHINES – BZ RANGE
GENERAL FEATURES■ Compact single group, ideal for small coffee production –
small restaurants & bars ■ 12 months ‘return to base’ parts and labour warranty*■ Easy to use■ Electrical heating
■ Automatic boiler water supply
■ Machine will automatically stop if water level drops too low
■ Vibration delivery pump on both models
■ Steam and hot water brewing through steam wand with lever tap
■ BZ09PM has two step heating, first for coffee dosing and secondto raise steam temperature
■ Coffee pressure gauge
■ Stainless steel AISI 304 body
TECHNICAL FEATURES■ Voltage - 240 single phase
■ Boiler capacity: BZ09PM 0.5 litres, BZ10PM 1.5 litres
■ Water reservoir capacity: BZ09PM 3 litres, BZ10PM 3 litres
Ancillaries & OptionsItem Variants Part No.
Cleaning Kit(see page 49)
Cleaning Powder
Knock-out Draws(see page 49)
Cappuccino Kit(see page 49)
EspressopotConversion Kit
Blanking handle, brush and cleaning powder for group head cleaning, grinder brush and instructions
Box of 10 sachets of head cleaning powder (1⁄2 sachet per head)
Single knockout draw to fit under grinder(Dimensions W-300mm x D-410mm x H-91mm)
Stainless steel milk jug, chocolate shaker, clip-on milk thermometer, milk spatula and instructions for a better Cappuccino
Kit for subsequent conversion of a group for Espressopot use (price per group)
ESPCL
Z802106
Q907001
Q907011
ESPKIT2
Model Type No. of Handles Dimensions mm Boiler Power AmpsGroups Single/Double W x D x H Capacity kW
BZ09PM Semi-automatic 1 D 250 x 425 x 375 0.5 lt. 1.7 13
BZ010PM Semi-automatic 1 D 250 x 425 x 375 1.5 lt. 1.4 13
BZ09PM
BZ10PM
* Our standard warranty is a 12 month ‘return to base’ warranty. Return shipping costs must be met by the buyer.
42
BEZZERA ESPRESSO COFFEE MACHINES – GIULIA & GALATEA DOMUS RANGES
* Our standard warranty is a 12 month ‘return to base’ warranty. Return shipping costs must be met by the buyer.
GENERAL FEATURES■ 12 months ‘return to base’ parts and labour warranty*■ Electric heating
■ Automatic boiler water supply
■ Machine will automatically stop if water level drops too low
■ Vibration delivery pump on both models
■ Water tank
■ Stainless steel AISI 304 body
TECHNICAL FEATURES■ Voltage - 240 single phase
■ Boiler capacity: Giulia MN 2 litres, Galatea Domus MN 2 litres
■ Water reservoir capacity: Giulia MN 4 litres, Galatea Domus MN 4 litres
Ancillaries & OptionsItem Variants Part No.
Back Flush Handle
Cleaning Kit(see page 49)
Cleaning Powder
Knock-out Draws(see page 49)
Cappuccino Kit(see page 49)
EspressopotConversion Kit
Suits Giulia and Galatea Domus models
Blanking handle, brush and cleaning powder for group head cleaning, grinder brush and instructions
Box of 10 sachets of head cleaning powder (1⁄2 sachet per head)
Single knockout draw to fit under grinder(Dimensions W-300mm x D-410mm x H-91mm)
Stainless steel milk jug, chocolate shaker, clip-on milk thermometer, milk spatula and instructions for a better Cappuccino
Kit for subsequent conversion of a group for Espressopot use (price per group)
Q907157
ESPCL
Z802106
Q907001
Q907011
ESPKIT2
Model Type No. of Handles Dimensions mm Boiler Power AmpsGroups Single/Double W x D x H Capacity kW
GIULIA MN Semi-automatic 1 S & D 320 x 450 x 440 2 lt. 1.6 13
DOMUS MN Semi-automatic 1 S & D 360 x 455 x 450 2 lt. 1.6 13
GALATEA DOMUS MN
BACK FLUSHHANDLE
GIULIA MN
43
BEZZERA ESPRESSO COFFEE MACHINES – BISTRO COMPACT RANGE
GENERAL FEATURES■ 12 months ‘on site’ parts and labour warranty■ Uncomplicated design
■ Simple to use
■ All working surfaces stainless steel
■ Compact width
■ Semi or fully automatic versions
■ Hot water font and steam arm
■ Automatic filling
■ Espressopot option can be added to one or both groups at no extracost – if specified at time of order
■ Supplied with free cleaning kit
TECHNICAL FEATURES■ Voltage 240V – Single phase
■ High quality copper boiler
■ Dual pressure gauge
■ Large heat exchangers
■ Fully automatic version has precise volumetric control
Ancillaries & OptionsItem Variants Part No.
Water Treatment
Cleaning Kit(see page 49)
Cleaning Powder
Knock-out Draws(see page 49)
Cappuccino Kit(see page 49)
EspressopotConversion Kit
ScaleGard 195 water treatment kit(essential to limit scaling & to improve water quality for better coffee)(N.B. The life of the filter is limited to the amount of water used and water hardness, the filter should be replaced after a maximum of 4 months) Replacement filter cartridge 195
Blanking handle, brush and cleaning powder for group head cleaning, grinder brush and instructions
Box of 10 sachets of head cleaning powder (1⁄2 sachet per head)
Single knockout draw to fit under grinder(Dimensions W-300mm x D-410mm x H-91mm)
Stainless steel milk jug, chocolate shaker, clip-on milk thermometer, milk spatula and instructions for a better Cappuccino
Kit for subsequent conversion of a group for Espressopot use (price per group)
Q907200
Q907201
ESPCL
Z802106
Q907001
Q907011
ESPKIT2
Model Type No. of Handles Dimensions mm Boiler Power AmpsGroups Single/Double W x D x H Capacity kW
BC2P Semi-automatic 2 S + D 610 x 490 x 490 8 lt. 2.75 13
BC2D Fully automatic version of above machine
BC2P BC2D
44
BEZZERA ESPRESSO COFFEE MACHINES – BISTRO RANGE
Ancillaries & OptionsItem Variants Part No.
Water Treatment
Cleaning Kit(see page 49)
Cleaning Powder
Knock-out Draws(see page 49)
Cappuccino Kit(see page 49)
EspressopotConversion Kit
ScaleGard 195 water treatment kit(essential to limit scaling & to improve water quality for better coffee)(N.B. The life of the filter is limited to the amount of water used and water hardness, the filter should be replaced after a maximum of 4 months) Replacement filter cartridge 195
Blanking handle, brush and cleaning powder for group head cleaning, grinder brush and instructions
Box of 10 sachets of head cleaning powder (1⁄2 sachet per head)
– Single knockout draw to fit under grinder(Dimensions W-300mm x D-410mm x H-91mm)– 2 Draw knockout draw for Bistro, B2P & B2D (Dimensions W-700mm x D-530mm x H-155mm)– 3 Draw knockout draw for Bistro, B3P & B3D (Dimensions W-1200mm x D-530mm x H-155mm)
Stainless steel milk jug, Chocolate shaker, Clip-on milk thermometer, milk spatula and instructions for a better Cappuccino
Kit of parts for subsequent conversion of a group to Espressopot use (price per group)
Q907200
Q907201
ESPCL
Z802106
Q907001
Q907000
Q907003
Q907011
ESPKIT2
GENERAL FEATURES■ 12 months ‘on site’ parts and labour warranty■ All stainless steel and chrome finish
■ Simple and clean lines
■ Available as semi or fully automatic versions
■ Fully automatic versions have precise volumetric control for a perfect espresso
■ Espressopot option can be added to any or all groups at no extra cost – if specified at time of order
■ Hot water font & steam arm (2 steam arms on B3 models)
■ Supplied with free cleaning kit
■ 4 group versions available – enquire for details
TECHNICAL FEATURES■ Voltage – 240V single phase
■ Copper boiler accessed through solid brass detachable end plate
■ Dual pressure gauge
Model Type No. of Handles Dimensions mm Boiler Power AmpsGroups Single/Double W x D x H Capacity kW
B1P Semi-automatic 1 S + D 490 x 445 x 490 5 lt. 2.3 13
B1D Fully automatic version of above machine
B2P Semi-automatic 2 S + D 700 x 445 x 490 11 lt. 3.3 20
B2D Fully automatic version of above machine
B3P Semi-automatic 3 S + 2 x D 930 x 445 x 490 17 lt. 5.3 30
B3D Fully automatic version of above machine
B4P Semi-automatic 4 S + 3 x D 1150 x 445 x 490 24 lt. 5.3 30
B4D Fully automatic version of above machine
B2PB1P
B2DB1D
B3P
B3D
B4P
B4D
45
BEZZERA ESPRESSO COFFEE MACHINES – ELLISSE RANGE
GENERAL FEATURES■ 12 months ‘on site’ parts and labour warranty■ Elegant style for ‘front of bar’ use
■ Available in charcoal trim as standard
■ Available in blue trim to order
■ Available as semi or fully automatic versions
■ Fully automatic versions have precise volumetric control for a perfect espresso
■ Espressopot option can be added to any or all groups at no extra cost – if specified at time of order
■ Hot water font & steam arm, (2 steam arms on E2 & E3 models)
■ 4 group versions available – enquire for details
■ Supplied with free cleaning kit
TECHNICAL FEATURES■ Voltage – 240V single phase
■ Copper boiler accessed through solid brass detachable end plate
■ Dual pressure gauge
Ancillaries & OptionsItem Variants Part No.
Water Treatment
Cleaning Kit(see page 49)
Cleaning Powder
Knock-out Draws(see page 49)
Cappuccino Kit(see page 49)
EspressopotConversion Kit
ScaleGard 195 water treatment kit(essential to limit scaling & to improve water quality for better coffee)(N.B. The life of the filter is limited to the amount of water used and water hardness, the filter should be replaced after a maximum of 4 months) Replacement filter cartridge 195
Blanking handle, brush and cleaning powder for group head cleaning, grinder brush and instructions
Box of 10 sachets of head cleaning powder (1⁄2 sachet per head)
– Single knockout draw to fit under grinder(Dimensions W-300mm x D-410mm x H-91mm)– 2 Draw knockout draw for Ellisse, E2P & E2DE (Dimensions W-700mm x D-530mm x H-155mm)– 3 Draw knockout draw for Ellisse, E3P & E3DE (Dimensions W-1200mm x D-530mm x H-155mm)
Stainless steel milk jug, chocolate shaker, clip-on milk thermometer, milk spatula and instructions for a better Cappuccino
Kit for subsequent conversion of a group for Espressopot use (price per group)
Q907200
Q907201
ESPCL
Z802106
Q907001
Q907000
Q907003
Q907011
ESPKIT2
Model Type No. of Handles Dimensions mm Boiler Power AmpsGroups Single/Double W x D x H Capacity kW
E1P Semi-automatic 1 S + D 570 x 500 x 510 5 lt. 2.2 13
E1DE Fully automatic version of above machine
E2P Semi-automatic 2 S + D 710 x 500 x 510 11 lt. 3.3 20
E2DE Fully automatic version of above machine
E3P Semi-automatic 3 S + 2 x D 960 x 500 x 510 17 lt. 5.3 30
E3DE Fully automatic version of above machine
E4P Semi-automatic 4 S + 3 x D 1170 x 500 x 510 24 lt. 5.3 30
E4DE Fully automatic version of above machine
E1P E2P E3P
E1DE E2DE E3DE
E4P
E4DE
46
BEZZERA ESPRESSO COFFEE MACHINES – EAGLE RANGE
Model Type No. of Handles Dimensions mm Boiler Power AmpsGroups Single/Double W x D x H Capacity kW
Brass Semi-automatic 2 S + D 740 x 500 x 1000 11 lt. 3.3 20
Cartier As above but in chrome and brass finish
Additional charge for fully automatic version of above machines
Ancillaries & OptionsItem Variants Part No.
Water Treatment
Cleaning Kit(see page 49)
Cleaning Powder
Knock-out Draws(see page 49)
Cappuccino Kit(see page 49)
EspressopotConversion Kit
ScaleGard 195 water treatment kit(essential to limit scaling & to improve water quality for better coffee)(N.B. The life of the filter is limited to the amount of water used and water hardness, the filter should be replaced after a maximum of 4 months) Replacement filter cartridge 195
Blanking handle, brush and cleaning powder for group head cleaning, grinder brush and instructions
Box of 10 sachets of head cleaning powder (1⁄2 sachet per head)
Single knockout draw to fit under grinder(Dimensions W-300mm x D-410mm x H-91mm)
Stainless steel milk jug, chocolate shaker, clip-on milk thermometer, milk spatula and instructions for a better Cappuccino
Kit of parts for subsequent conversion of a group to Espressopot use (price per group)
Q907200
Q907201
ESPCL
Z802106
Q907001
Q907011
ESPKIT2
GENERAL FEATURES■ 12 months ‘on site’ parts and labour warranty■ Traditional, elegant and stylish 2 group machine
■ Available in Brass or Cartier finish (chrome with brass details)
■ Available as semi or fully automatic
■ Fully automatic versions have precise volumetric control for a perfect espresso
■ Espressopot option can be added to one or both groups at no extra cost – if specified at time of order
■ Hot water font & steam arm
■ All Eagles supplied to order – please enquire for details
TECHNICAL FEATURES■ Voltage – 240V single phase
■ Copper boiler accessed through solid brass detachable end plate
■ Dual pressure gauge
CARTIER (shown in fully automatic version)
BRASS (shown in semi-automatic version)
47
BEZZERA ESPRESSO COFFEE MACHINES – GALATEA
GENERAL FEATURES■ 12 months ‘on site’ parts and labour warranty■ Superb retro styling
■ Semi automatic that has the look of a traditional lever machine
■ Highly polished chrome finish for maximum effect
■ Bezzera illuminated in soft blue light on rear panel
■ Adjustable height cup platform, 95 to 190mm cup height
■ Twin steam arms and single water arm
■ Available as semi automatic
■ Espressopot option can be added to one or both groups at no extra cost – if specified at time of order
■ Hot water font & steam arm
■ All Galatea’s supplied to order – please enquire for details
TECHNICAL FEATURES■ Voltage – 240V single phase
■ Copper boiler accessed through solid brass detachable end plate
■ Dual pressure gauge
Model Type No. of Handles Dimensions mm Boiler Power AmpsGroups Single/Double W x D x H Capacity kW
Galatea Semi-automatic 2 S + D 850 x 660 x 800 11 lt. 3.8 16
Ancillaries & OptionsItem Variants Part No.
Water Treatment
Cleaning Kit(see page 49)
Cleaning Powder
Knock-out Draws(see page 49)
Cappuccino Kit(see page 49)
EspressopotConversion Kit
ScaleGard 195 water treatment kit(essential to limit scaling & to improve water quality for better coffee)(N.B. The life of the filter is limited to the amount of water used and water hardness, the filter should be replaced after a maximum of 4 months) Replacement filter cartridge 195
Blanking handle, brush and cleaning powder for group head cleaning, grinder brush and instructions
Box of 10 sachets of head cleaning powder (1⁄2 sachet per head)
Single knockout draw to fit under grinder(Dimensions W-300mm x D-410mm x H-91mm)
Stainless steel milk jug, chocolate shaker, clip-on milk thermometer, milk spatula and instructions for a better Cappuccino
Kit of parts for subsequent conversion of a group to Espressopot use (price per group)
Q907200
Q907201
ESPCL
Z802106
Q907001
Q907011
ESPKIT2
Galatea
48
BEZZERA ESPRESSO – GRINDERS/DISPENSERS – ESPRESSOPOT COFFEE
Model Type Bean Hopper Grind Dimensions mm AmpsSize Rate W x D x H
BB003B Heavy Duty Grinder/Dispenser (Black) 1 kg 6 kg/hr 180 x 380 x 550 13
BB003 Heavy Duty Grinder/Dispenser 1 kg 6 kg/hr 180 x 380 x 550 13
BB004 Medium Duty Grinder/Dispenser 1⁄2 kg 1 kg/hr 150 x 250 x 340 13
BB005 MN Medium Duty Grinder/Dispenser 1⁄4 kg 4 kg/hr 130 x 260 x 400 13
Coffee: EspressopotItem Variants Part No. No. of Cases
Premium Blend
Decaffeinated
Case of 150 Premium pots (blend 80% Arabica / 20 % Robusta)
Case of 150 Decaffeinated blend pots
136
13 6
ESPPOTS1
ESPPOTS2
BB003BB003B BB004
ESPRESSOPOT –PREMIUM BLEND
ESPRESSOPOT –DECAFFEINATED
GENERAL FEATURES – GRINDERS/DISPENSERS■ Heavy duty construction
■ Top quality grinding blades
■ Precise grinding and delivery adjustment
■ 1 kg of beans makes approx. 120 espresso coffees
■ BB003 – Stainless steel finish
■ BB003B – Glossy black finish
■ BB004 – Red finish
■ BB005 – Stainless steel AISI 304 finish
■ Easy operation
TECHNICAL FEATURES■ Voltage – 240V single phase
BB005 MN
49
Ancillaries & OptionsItem Variants Part No.
Milk Foamer*
Cleaning Kit
Knock-out Draws
Cappuccino Kit
Back Flush Handle
Coffee Press
Stainless steel body c/w detachable drip tray (Dimensions W-190mm x D-360mm x H-385mm)
Blanking handle, brush and cleaning powder for group head cleaning, grinder brush and instructions
– Single knockout draw to fit under grinder (Dimensions W-300mm x D-410mm x H-91mm)– 2 Draw knockout draw (for BZ02S range)– 2 Draw knockout draw for Bistro/Ellisse range (Dimensions W-700mm x D-530mm x H-155mm)– 3 Draw knockout draw for Bistro/Ellisse range (Dimensions W-1200mm x D-530mm x H-155mm)
Stainless steel 32 oz milk jug, chocolate shaker, clip-on milk thermometer, milk spatula and instructions for a better Cappuccino
Suits Giulia and Galatea Domus modelsSuitable for all other models
Solid one piece Bezzera embossed pressTwo piece Bezzera embossed pressStand for coffee press – suits both styles
MILKFO
ESPCL
Q907001Q907002Q907000Q907003
Q907011
Q907157Q907156
Q118013Q118014Q118015
GENERAL FEATURES – MILK FOAMER■ Milk Foamer comes with 12 months
‘return to base’ parts and labour warranty*
■ Stand alone unit for volume production of foamed milk
■ Prevents delays at the espresso machine
■ Produces consistent results
TECHNICAL FEATURES – MILK FOAMER■ 1 kW – 13amp power supply
■ 2 litre water tank
CLEANINGKIT
CAPPUCCINO KIT
Q907000
Q907001
Q907002
MILK FOAMER
STAND FORCOFFEE PRESS
BACK FLUSHHANDLE
* Our standard warranty is a 12 month ‘return to base’ warranty. Return shipping costs must be met by the buyer.
ADDITIONAL ITEMS FOR BEZZERA ESPRESSO COFFEE MACHINES
COFFEE PRESSQ118014
COFFEE PRESSQ118013
50
WATER SOFTENERS & ANCILLARIES
FEATURES■ Four sizes 8 to 20 litre capacity
■ Robust construction and easy to install
■ Simple to manually regenerate by flushing through a salt solution
■ If the correct unit is used then regeneration should not be requiredmore than once a week except in the hardest water areas
■ Diameter of all models 185mm
■ Softening capacity @ 120 PPM
MANUAL WATER SOFTENERA manually salt regenerated scalecontrol system, ideal for the protectionof glass and dishwashers.
Item Variants Capacity – Litres Dimensions mm Part No.W x D x H
Automatic Salt Regenerated Softener Cold Water 1400 275 x 470 x 550 Q900100Cold Water 2300 275 x 470 x 650 Q900101Cold Water 3000 275 x 470 x 840 Q900102Cold Water 5200 320 x 530 x 1150 Q900103Hot Water 2300 275 x 470 x 650 Q900104
AUTOMATIC SALTREGENERATEDSOFTENERAutomatically salt regeneratedscale control, ideal for glass and dishwashers suitable forestablishments that cannot control the task of manualregeneration.
Item Type Part No.
Scalegard Filter head, filter cartridge 195, water meter, 2 x 3⁄4" nipples and hose 3⁄4" Q907200Replacement filter cartridge 195 Q907201Water meter Q907202Replacement head Q907203
FEATURES■ Large disposable resin cartridges – Removes scale forming minerals so
there is little or no scale build up, therefore potential service costs aredramatically reduced
■ Carbon block filter – Removes chlorine taste, odour and requiresminimum flushing at install
■ Built in bypass – Gives best blend of water for hot beverages
■ Quick-change head and cartridge – No tools required for exchange,fresh seals to prevent leaks fitted to new cartridge
■ Compact design and easy disposal – Can be mounted using bracketsupplied or fitted horizontally into a convenient cupboard; usedcartridges can be disposed of without any environmental concerns
■ Capacity – 2.8 Litre resin filter – Gives 1600 litres of softened water withan initial hardness of 200 PPM, considered very hard water. 5 Microncarbon block allowing 4 litres per minute flow rate
SCALEGARDA disposable scale control systemdesigned to protect coffee andvending machines.
Assembled unit:
640mm height x 102mm diameter(excluding hose and meter)
Item Variants Capacity – Litres Height mm Part No.
Manual Water Softener 8 litre 1000 420 Q90000812 litre 1500 520 Q90001216 litre 2100 620 Q90001620 litre 3000 920 Q900020
FEATURES■ Unit regeneration controlled by adjustable time switch, usually set
to run when equipment is not required
■ Five sizes 10 to 30 litres for cold water and 10 litres for hot water
■ Compact design with a speckled grey finish to maintain a clean look
■ Single 13-amp electrical socket required
■ Cold water units for 5 to 40°C, hot water unit for 5 to 65°C water supply temperature
■ Only weekly salt top up required
■ Softening capacity @ 300 PPM
51
BASKETS AND STANDS
Item
Open plastic basket 350 x 350 mm Open plastic coated wire basket 350 x 350 mm Open plastic basket 385 x 385 mm Open plastic coated wire basket 390 x 390 mm Open plastic coated wire basket 400 x 400 mm Open plastic basket 450 x 450 mm Open plastic basket 400 x 400 mm Plate plastic coated wire basket 450 x 450 mmOpen plastic coated wire basket 450 x 450 mm Plastic pegged basket 450 x 450 mm Universal stand – black finish Universal stand – stainless steelUniversal stand – chrome finishPlastic (square) cutlery basket 110 x 110 x 140 mmPlastic (round) cutlery basket 110 x 130 mm
Part No.
Q902302Q902000Q902303Q902003Q902004Q902300Z970040Q902011Q902005Q902301Q902100Q902101Q902104Z976016Z976011
Plate insert plastic coated wire (15 plates) 308 x 100 mmPlate insert plastic coated wire (17 plates) 345 x 100 mmPlate insert plastic coated wire (20 plates) 405 x 100 mmPlate insert plastic 295 x 90 mmPlate insert plastic coated wire (12 plates) 320 x 80 mmThree tier mobile racking system – 400 baskets*Three tier mobile racking system – 450 baskets*Three tier mobile racking system – 500 baskets*Drip tray 375mmDrip tray 425mmDrip tray 470mmDrip tray 520mm
* Three tier mobile racking systems are supplied flat packed for simple self assembly. Drip trays are included. Baskets are not supplied.
Z970047Z970044Z970061Q902310Z970517Q902220Q902226Q902221Q902200Q902201Q902202Q902203
Part No.
Item
Q902302 Q902303
Plastic pegged basket
Q902301
Plastic (round) cutlery basket
Z976011
Universal stand – stainless steel
Q902101
Drip tray
Q902200Q902201
Q902202Q902203
Universal stand – chrome finish
Q902104
Three tiermobilerackingsystem
Q902220Q902226 Q902221
Open plasticbasket
Z970040 Q902300
Open plasticbasket
Open plastic coated wire basket
Q902000 Q902003
Open plastic coated wire basket
Q902004 Q902005
Plate insert plastic coated wire
Z970047Z970044 Z970061
Plate insert plastic coated wire
Z970517
Plastic (square) cutlery basket
Z976016
Universal stand – black finish
Q902100
Plate plastic coated wire basket
Q902011
52
WAREWASHING CHEMICAL SUPPLIES
Maidaid® Premier Dishwash Detergent (20 litres)
Item Product Code Packed
Maidaid® Crystal 3000 Glasswash Detergent Q902400 2 x 5 litres
Maidaid® Premier Dishwash Detergent Q902404 2 x 5 litres
Maidaid® Premier Dishwash Detergent Q902403 1 x 20 litres
Maidaid® Soilmaster Dishwash Liquid Q902405 2 x 5 litres
Maidaid® Low-Temp Glasswasher and Dishwasher Detergent Q902410 2 x 5 litres
Maidaid® Glasswash Detergent Q902401 2 x 5 litres
Maidaid® Super Rinse Aid Q902407 2 x 5 litres
Maidaid® Super Rinse Aid Q902408 1 x 20 litres
Maidaid® Glass Renovator Q902402 2 x 5 litres
Maidaid® Supersoap X Dishwasher Powder Q902406 1 x 10 kg
Maidaid® Crystal 3000 Glasswash Detergent
Maidaid® Premier Dishwash Detergent
Maidaid® Low-Temp Glasswasherand Dishwasher Detergent
Maidaid® Soilmaster Dishwash Liquid
Maidaid® Glasswash Detergent
Maidaid® Super Rinse Aid
Maidaid® Glass Renovator Maidaid® Supersoap X Dishwasher PowderMaidaid® Super Rinse Aid (20 litres)
53
Model Description To Suit Glasswasher/ Dimensions Sink DimensionsDishwasher Model mm mm
WORKCO1 Cocktail work station N/A 1800 x 650 x 850 N/A
WORK02 Glasswasher work station C500, D500, D510 1900 x 650 x 920 332 x 332 x 200WHB 229 x 356 x 180
WORK03 Glasswasher work station C500, D500, D510 1150 x 650 x 920 332 x 332 x 200
WORK03A Glasswasher work station D450 1075 x 650 x 920 332 x 332 x 200
WORK04 Glasswasher work station C400, D400 1050 x 650 x 920 332 x 332 x 200
Q902221 Three tier mobile racking system* C500, D500, D510 570 x 510 x 810 N/A
Q902226 Three tier mobile racking system* D450 520 x 460 x 810 N/A
Q902220 Three tier mobile racking system* C400, D400 470 x 410 x 810 N/A
* Three tier mobile racking systems are supplied flat packed for simple self assembly. Drip trays are included. Baskets are not supplied.
FEATURES■ Attractive and efficient work stations
■ 18 gauge sheet stainless steel fabrication
■ No bacteria-friendly joins or sealed areas
■ Ergonomic design makes use of every inch of available space enabling one operative to do the work of three people
■ All units can be supplied with castors
■ 3 weeks from time of order to delivery
■ All units supplied with taps
■ Units are not supplied with baskets or machines
WORK02
WORKCO1 WORK03
WORK03A Q902220
STAINLESS STEEL FABRICATION
54
COMMISSIONING AND TRAINING PACKAGES
Getting the equipment set correctly for the environment in which
they will be operated is vital. Warewashing equipment should not be
considered as plug and play.
All machines will require chemical dosing to be set correctly,
machines cannot be supplied ready adjusted to cope with the
different concentrations of chemicals, different water quality and
deal efficiently with the different products they have to wash.
Early staff training is highly recommended to achieve maximum
productivity from staff and equipment.
Many warewashing machines have been supplied by Maidaid Halcyon®
to sites where the ordering of additional product racks would have
resulted in a smoother introduction of the new equipment.
Conditions and requirements
*Commisioning: Machine must have been installed to a suitable standard and be ready to run. If an unsafe or unacceptable installation is found commisioning will not be attemptedand no credit of charges for package one will be made.
**Training: Machines must be available as for commisioning and it must be assured that all staff to be trained are available at the prearranged time. Trainers cannot be asked todelay training beyond the agreed start time.
Installation
Maidaid Halcyon® are able to provide an installation service for all equipment in this Product Guide, please contact our office for current prices and conditions.
Delivery
With the exception of the models listed below all prices include delivery to UK mainland. Delivery is to doorstep only, if a different service is required we will be happy to quote forthat service.
Equipment that may be subject to delivery charge: Rack/Flight, Pot/Utensil Washers and Modular Icemakers.
To assist customers achieve the best
results from their new warewashing
equipment Maidaid Halcyon® is
pleased to introduce the packages
detailed herewith.
PACKAGE ONE
For Under Counter or Pass Through machines
■ Commissioning only*
PACKAGE TWO
For Under Counter models
■ Commissioning*, plus the following
■ Two plastic open cup/glass racks (or four for 350 and 400mm machines)
■ Two plastic pegged racks (450 and 500mm machines only)
■ Two five litre bottles of Maidaid® Super Rinse Aid
■ Two five litre bottles of Maidaid® Low-Temp Glass/Dishwasher Detergent
■ Staff training** if carried out immediately after commissioning –
net price £25
PACKAGE THREE
For Pass Through models
■ Commissioning*, plus the following
■ Three plastic open cup/glass racks
■ Three plastic pegged racks
■ Two five litre bottles of Maidaid® Super Rinse Aid
■ Two five litre bottles of Maidaid® Low-Temp Glass/Dishwasher Detergent
■ Staff training** if carried out immediately after commissioning –
net price £30
PACKAGE FOUR
For Rack machines
■ Commissioning*, plus the following
■ Four plastic open cup/glass racks
■ Four plastic pegged racks
■ Two five litre bottles of Maidaid® Super Rinse Aid
■ Two five litre bottles of Maidaid® Low-Temp Glass/Dishwasher Detergent
■ Staff training** if carried out immediately after commissioning –
net price £45
Your Local Distributor
In the event of further technical development we reserve the right to alter our design,specification and price without notice.
CDL04/11/8251
Quality ControlQuality of product and after-sales service is based on the operation of systems tothe internationally recognised quality standard BS EN ISO 9002. However, aboveall else, quality of service results from the abilities, motivation and teamwork ofpeople within the company.
Designed & produced by Carlton Design 01702 420228
[email protected] www.carltondesign.co.uk
Maidaid HalcyonThe Engine Shed, Top Station RoadBrackley, Northants NN13 7UG
Telephone 0845 1308070Telefax 01280 845340Email [email protected] www.maidaid.co.uk