PRODUCT FEATURES: PARTS INCLUDED: INSTALLATION DIAGRAM
3
R INTERFACING SOLUTIONS Sightline Multi View Integration Crux Interfacing Solutions • 21541 Nordhoff St., Unit C, Chatsworth, CA 91311 phone: (818) 609-9299 • fax: (818) 996-8188 • www.cruxinterfacing.com rev.081120 RVCNF-74U Rear View Camera Integration with License Plate Camera for Select Nissan Vehicles with 4.3” Screen 1 of 3 PRODUCT FEATURES: PARTS INCLUDED: - Allows the integraon of an aſtermarket backup camera to the factory radio. - Plug and play wiring for easy installaon. Universal License Plate Camera RVCNS-74U T-Harness 26’ Extension Cable INSTALLATION DIAGRAM: 32 Pin (Female) 32 Pin (Male) To Radio To Vehicle Harness WHITE Wire Parking Guide Lines (cut to remove parking lines) +12V Red (tap to +12V Backup Light wire) Ground - Black (tap to Backup Light ground wire) Reverse Gear 1. Remove the dash panel above the radio using a pry tool. 2. Carefully pull out the radio trim bezel. INSTALLATION INSTRUCTIONS: RVCNS-74U Installaon at the Radio:
Transcript of PRODUCT FEATURES: PARTS INCLUDED: INSTALLATION DIAGRAM
R
INTERFACING SOLUTIONS
SightlineMulti View Integration
Crux Interfacing Solutions • 21541 Nordhoff St., Unit C, Chatsworth, CA 91311phone: (818) 609-9299 • fax: (818) 996-8188 • www.cruxinterfacing.com
rev.081120
RVCNF-74URear View Camera Integration with License Plate
Camera for Select Nissan Vehicles with 4.3” Screen
1 of 3
PRODUCT FEATURES:
PARTS INCLUDED:
- Allows the integration of an aftermarket backup camera to the factory radio.- Plug and play wiring for easy installation.
Universal License Plate Camera RVCNS-74U T-Harness 26’ Extension Cable
INSTALLATION DIAGRAM:
32 Pin(Female)
32 Pin(Male)
To Radio
To VehicleHarness
WHITE WireParking Guide Lines
(cut to remove parking lines)
+12V Red(tap to +12V Backup Light wire)
Ground - Black(tap to Backup Light ground wire)
ReverseG
ear
1. Remove the dash panel above the radio using a pry tool.
2. Carefully pull out the radio trim bezel.
INSTALLATION INSTRUCTIONS:
RVCNS-74U Installation at the Radio:
3. Use the pry tool to pull put the corners of the radio trim bezel.
4. Unplug the factory radio connector and plug it into the RVCNS-74U t-harness.
R
INTERFACING SOLUTIONS
SightlineMulti View Integration
Crux Interfacing Solutions • 21541 Nordhoff St., Unit C, Chatsworth, CA 91311phone: (818) 609-9299 • fax: (818) 996-8188 • www.cruxinterfacing.com
rev.081120
RVCNS-74URear View Camera Integration with License Plate
Camera for Select Nissan Vehicles with 4.3” Screen
2 of 3
1. Remove the rear license plate. 2. Mount the license plate camera with the bar behind the license plate. Run the extension cable towards the radio.
3. Tap the Red wire on the extension cable to +12V on the reverse light. Tap the black wire to ground. See diagram on page 1.
4. Tap the Red wire on the Yellow RCA connector to the wire on the T-harness labeled “Reverse Gear”. See diagram on page 1.
License Plate Camera Installation:
5. Plug the male RCA from the extension cable to the female RCA on the RVCNS-01F t-harness.
6. Test the camera for functionality before re-installing the radio.
R
INTERFACING SOLUTIONS
SightlineMulti View Integration
Crux Interfacing Solutions • 21541 Nordhoff St., Unit C, Chatsworth, CA 91311phone: (818) 609-9299 • fax: (818) 996-8188 • www.cruxinterfacing.com
rev.081120
RVCNS-74URear View Camera Integration with License Plate
Camera for Select Nissan Vehicles with 4.3” Screen
3 of 3
VEHICLE APPLICATIONS:
2010-20152013-201620152013-20152011-20172011-20152010-20152013-20152014-20152014-2015
ALTIMAFRONTIERJUKELEAFQUESTROGUESENTRATITANVERSAVERSA NOTE
NOTE: Not compatible in vehicles with Navigation system.
NISSAN
