PRODUCT DESCRIPTION PROPERTIES BENEFITS

K 5 PC SPAPCE BASED SUPERPLASTICISER FOR HIGH GRADE READYMIX CONCRETE

PRODUCTK 5 PC SPA is a superplasticiser based on polycarboxylic ether polymer. The product has been designed for highest concrete quality.

DESCRIPTION

• K -5 PC SPA is a superplasticiser based on polycarboxylic ether polymers. The product has been designed for highest concrete quality . It enables high workable concrete to be produced at low dosage with improved slump retention.

• Compared to traditional superplasticizers , K - 5 PC SPA reduces risks of retempering of concrete on the jobsite with water, and improves the rheological and mechanical properties on concrete.

PROPERTIES

Apperance Pale Brown LiquidActive ingredient Sodium salt of polycarboxlate EtherTotal Solid (%) 45.0+_ 2.0Ph (10% solution, 20o C 7+_1.0Specific Gravity (20o C) 1.15+_0.15Viscosity(20o c) <750mpa.sAlkalinity (%) <.01Chlorides (%) nil

BENEFITS

High workable concrete at low dosage. Require less workmanship Extends slump life Provides excellent workability without and increase in water content. Reduces water content , maintaining the same workability. Improves pumpability & Durability.

1

ISO 9001-2000 COMPANY

Mfg. Construction Chemicals & Paints

Improves the mechanical properties of concrete such as compressive, flexural, and tensile strength , etc.

Reduces shrinkage and cracks Improves adhesion to reinforcement and prestressed steel. Promotes usage of cementitious supplementary materials such as fly ash, blast furnace slag, and

silica fume. Reduces permeability Reduces noise by high speed agitation at job sites. Increases the segregation resistance. Decreases bugholes. Reduces bleeding at high slumps The product being almost colourless is suitable for architectural concrete

APPLICATIONS

Longer slump-retaining applications High volume fly ash or blast furnace slag or silica fume concrete. High performance concrete. High strength concrete. Pre-casting High –flowing conrete. Ultra high strength concrete. Concrete with aesthetically superb surface Self- compacting concrete Pumping concrete Shotcrete Light-light concrete.

2


K CRETE NPLOW COST CONCRETE PLASTICISER

DESCRIPTION

K CRETE NP is based on processed lignosulphonates and is supplied as a brown liquid. Generally cement particles tend to clump together and K CRETE NP works by improving the dispersion of the agglomerates with in the concrete mix which ensures that the cement is used more efficiently.

BENEFITS

• Increases strength and durability.• Easier placing compacting and finishing.• Higher cohesion-reduces risk of segregation and bleeding.• Increases workability.• Lower cement content for specified strength and workability.• Lower water requirement for given workability.

USE IN CONCRETE

K CRETE NP is low cost water reducer which can be used to get one or combination of benefits. AS A WATER REDUCER: (For increased strength) Reduction in the water cement to maintain original workability increases strength. The concrete is also denser with lower permeability. A WORKABILITY AID: Increased workability can be achieved by using K CRETE NP for a given water cement ratio which will increase the flow characteristic of the concrete leading to easy placement compaction and finishing. REDUCTION OF CEMENT CONTENT: K CRETE NP can be used to reduce cement content of the extend of 8-10% by maintaining the original strength specification and workability and reducing the water content required for the given mix.

PRODUCT

To achieve increased workability without loss of strength. Reduction in cement without loss ofWorkability or strength. To reduce water cement ratio for any given workability.

DURABILITY

Improved cohesion reduces the risk of segregation and bleeding and reduces laitance permeability. Increase in density will increase the durability and resistance to attack by aggressive agents corresponding to control mixes.

DOSAGE & PACKING

100ML TO 250ML OF K CRETE NP per 50kg of cement 5, 20, 50,100Litre Carboys.

3

Mfg. Construction Chemicals & Paints

COMPATIBILITY

K CRETE NP may be used with all types of Portland cement and high Alumina cement. It can be used in conjunction with other K MATE Admixture provided they are added separately to the concrete.

DIRECTION FOR USE

DOSAGE: K CRETE NP should be directly added to the mix preferably with the mixing water. The optimum dosage rate should be determined by site trails. The dosage rate is 150ml to 300ml per 50kg. Cement for large site jobs, dispensing equipment can be made use of

OVER DOSING:

Dosages unto 300ml/50kg have no deterious effect but above this level retardation will occur and may result in slight strength loss if no water reduction is made. TYPICAL PROPERTIES: COLOUR; Brown. SHELF LIFE

Minimum one year if stored below 50oC and are original containers stored under shade.

HEALTH & SAFETY

K CRETE NP non- toxic and ingestion is to be avoided. Any splashes on the skin must be washed with water. If contact with eyes occurs, wash well immediately with water and seek medical

4

K FIBREPolypropylene fiber reinforcement for concrete and mortar

BENEFITS

Chemically inert Easily and instantly disperse into mix Improves tensile and compressive strength Arrest drying shrinkage cracks Reduces permeability hence ensures water tightness Reduces density ensures more yield of mix.Reduces number of construction joints in floor Minimizes steel reinforcement in industrial floors Improves durability Can be used with all types of OPC Free from corrosive substances. Improves impact strength, increase fatigue resistance & concrete

toughness. Non corrosive, non-magnetic, chemically inert and 100% alkali proof

PRODUCT

K FIBRE is a unique specially treated fibre reinforcement for concrete & mortar, purpose. To improve tensile and compressive strength of concrete and mortar, also to minimizes the cracks and reduces permeability in the mix.

PACKING

• 90/125 gm pack.

DOSAGE

The addition rate of K FIBRE varies with grade of concrete and mortar. For optimum performance 125 gm pack should be used with 50 kg. of cement.

5


DESCRIPTION

K FIBRE is a unique specially treated fibre reinforcement which instantly disperses out through the mix ensures tensile and compressive strength which improves the durability of structure. Reduces rate of heat evolution, spreading heat of hydration over longer period & reducing thermal cracking effects.Used to reduce plastic & hardened concrete shrinkage.

WHERE TO USE

Can be used for internal plaster, External plaster, Concrete repairs, Terrace slab, Industrial floors,Concrete roads, Precast concrete, Railway sleepers etc. K Fiber is recommended where the objective is to control temperature/ shrinkage cracking while improving basic durability

TECHNICAL PROPERTIES

Denier (As per DIN - 53812) - 6.30; Tenacity (As per DIN - 53816) - 4.63; Material: 100% virgin polypropylene; Size (1). Length: 10 to15mm (2) Diameter: 30 to 100 micron ; Surface characteristics : Lustrous white rough surface ; Elongation : 55% ; Specific Gravity : 0.90 0.91 ; Modulus of

Elasticity : 1240 1517 Mpa ; Melting Point : 1600C- - 170

0C ; Ignition Point :

5900C ; Thermal Conductivity : Low ; Electrical conductivity : Low ; Acid & Salt

Resistance : High.

SHELF LIFE:

• 6 months from the date of manufacturing.

HEALTH & SAFETY

• K FIBRE is a non-toxic and non-flammable.

TECHNICALSERVICES

While new advances and changes will take place one thing will never change is quality and meeting. Special needs of customer. We are eager to work with you in development of new product and solve your problem

6

K CRETE AE

WATER REDUCING AIR ENTRAINING AGENT

DESCRIPTION

KCRETE AE acts at the interface of the cement-aggregate particles and mixing water to produce microscopic air bubbles evenly distributed throughout the concrete. The entrained air bubbles are of the optimum Diameter and spacing to give durability under freeze-thaw or salt attack conditions whilst enhancing lubrication during placing.

KCRETE AE complies with IS-9103-1999, Increased durability: Improved workability increase compaction whilst the controlled air entrainment considerably enhances resistance to attack by frost or salts by reduction of initial surface absorption of hardened concrete.

USES

• Increase the resistance of concrete to damage by sea water, frost and de-icing salts and also makes concrete structures less prone to cracking.

• Reduces the permeability of low cement content for mass pours such as dams and breakwaters.

• Is an ideal pumping aid to maintain cohesiveness and minimize segregation where concrete is placed mechanically?

• Improves the quality and long term durability of concrete exposed to severe weathering conditions.

ADVANTAGES

• Increases workability and cohesion• INCREASED COHESION: Entrained micro-bubbles of air assist in producing cohesion.• Improves workability increases compaction whilst the controlled air entrainment considerably

enhances resistance to attack by frost or salts by reduction of initial surface absorption.• Chloride free – safe in prestressed and reinforced concrete.

APPLICATION INSTRUCTIONS

Where KCRETE AE is used in an existing mix design, the cement and aggregate proportions should be adjusted to take into account the increase in yield. The sand content can normally be reduced by about 20 kg/m for each additional 1% of air entrained.

7


DOSAGE

The optimum dosage is best determined by site trials with the actual concrete mix which enables the effect of workability and air content to be measured. The rate of addition is generally within the range 100 ml to 300 ml KCRETE AE per 50 kg. cement according to the air content required. A dosage of 150 ml to 50 kg cement is normally sufficient to obtain 5% air entrainment.

PACKING

1, 5, 10, 50, 100 & 200 LTRS.

SHELF LIFE

12 months storage life when stored in original unopened container at between 5 ºC to 45 ºC in a dry and shaded place.

HEALTH & SAFETY

KCRETE AE is non-hazardous. It should not be swallowed or allowed to come into contact with skin or eyes. Suitable protective goggles and gloves should be worn. In the case of contact with eyes, rinse immediately with plenty of water and seek medical advice. If swallowed, seek medical attention immediately, do not induce vomiting.

NOTE

All information is given in good faith on the results gained from experience and tests. However, all recommendations or suggestions are made without guarantee since we don't have any control on site conditions and its uses.

8

K CRETE SPASUPERPLASTICISER

DESCRIPTION

K CRETE SPA is supplied as brown liquid based on sulphonated Naphthalene for formaldehyde condensates. The powerful dispering action of superplasticiser can be used in many ways to obtain dense, high strength durable concrete (M35, M40 and M45). The high water reduction upto 30% make K CRETE SPA ideal for use in precast concrete where high early strength are of paramount importance. K CRETE SPA is chloride free.

INCREASED WORKABILITY: K CRETE SPA when incorporated in concrete mixes increases the workability without addition of water; thus leading to easy placement and finishing without the risk of segregation and bleeding.

INCREASED STRENGTH: K CRETE SPA can be used to reduce upto 30% water for a given workability leading to increase in early and ultimate strengths. Such high early strengths and early stripping of form work lead to increased productivity on precast concrete and the production of high strength concrete without increasing cement content.

ADVANTAGES

• Use in precast concrete work• Increased strength 0- high early and ultimate strength, if water reduction is taken advantage of • Safe in prestressed concrete improves cohesion thus aids pumping of concrete • Facilitates rapid placing of concrete and with little or no vibration• Makes the concrete denser, hence durability increased• High water reductions upto 30%

PURPOSE

To produce high strength concrete and flowing concrete without addition of water. Enables high water reduction upto 30% leading to high early and ultimate strength . Ideal in precast concrete works.

PRODUCTTo produce high strength concrete and flowing concrete without addition of water. Enables high water reduction upto 30% leading to high early and ultimate strength. Ideal in precast concrete works.

9


DOSAGE & PACKING

• 200ml to 600ml/50kg cement. However, the optimum dosage to be determined by site trials.• 5,50,100,200litre carbuoys and drums.

TYPICAL PROPERTIES

• Physical state: Brown liquid, specific gravity:1.210 at 27oC, Chloride content: Nil as per IS 456 and BS 5075

• Air entrainment: Less than 1%additional air entrained.• K CRETE SPA can be used in mortar qrouting of prestressed wires.

The normal dosage is 200ml to 600 ml per 50kg cement. However, higher dosages can be used upto 0.8 litres with suitable changes in the mix especially sand to avoid segregation if no water reduction is made.

Over dosing upto double the normal dosage levels may lead to retardation of settings times and may tend to segregate and produce ultra fluid concrete.

HANDLING PRECAUTIONS

K CRETE SPA is non toxic. However, splashed on the skin should be washed well water and if contact with eye occurs, wash well with water and seek medical advice.

STORAGE LIFE

Minimum one year if stored below 50oC in original sealed containers. If allowed to stand sound for a long time, container should be stirred well before use.

1

BENEFITS:

• Chloride free, safe in prestressed and reinforced concrete• Early setting improves frost resistance• Provides plasticizing properties thereby jetting becomes easier.• Produces exceptionally high early strengths• Increases water impermeability, gives perfect water proofing.• Accelerates the hardening Process.• Particularly effective in concrete at low temperatures• Allows thicker layer in single operation hence increases the Speed of work.• Seals the water seepage like ground water in tunnels.• Reduces frost damage during construction which will save cost.• Allows overhead guniting.

DESCRIPTION :

KSPRAYPLAST is supplied in powder form, specially developed and designed to meet the demand for efficient and multifold properties desired at guniting job sites. It is suitable admixture for guniting and shotcreting operations. Accelerates the rate of hardening gives perfect water proofing. It has excellent bonding properties which reduces the wastage during operation of guniting, shotcreting or sprayed job, can be do a thick layer in single operation. By guniting with adding the admixture, it accelerate the hardening process by the reactive components rapidly combine with cement particles to setting and hardening process thereby making the mortar or concrete rock hard in minutes after jetting. It reduces the loss of material caused by rebound, thus reducing the cost. It can be used with all types of cement.

PACKING :

• 1 KG., 5 KG., and 25 kg., pack.

DOSAGE :

• 2 % to 5 % by weight. Optimum dosage will be determine by site trials

APPLICATION INSTRUCTIONS:

KSPRAYPLAST should be directly added to dry mix of proper graded and proportioned sand and cement. Thoroughly mix and then add desired quantity of water Dosage of KSPRAYPLAST should determine by trials accordingly the temperature and requirement of consumer.

TECHNICAL SERVICES :

While new advances and changes will take place one thing will never change is quality and meeting special needs of customer. We are eager to work with you in development of new product and solve your problem.

SHELF LIFE:

6 months. Should be stored under shed below 500c.

1

K 5 POLYSEAL GL Passes crash test

(FMVSS 212 standardDESCRIPTION

K 5 POLYSEAL GL is a fast curing one-component polyurethane sealant of high viscositywhich cures by the action of air moisture. By this reaction, the product changes from a pastyto an elastomeric state with high tensile strength.

AREAS OF APPLICATION

K 5 POLYSEAL GL is used for windshield bonding of cars with or without airbags.See also material safety data sheet

TECHNICAL DATA

• Appearance Thixotropic paste Colour Black Density at 20 °C Ca. 1.20 Application temperature 5 to 35 °C

• Skin formation time at 23 °C and 50 % HR 25 to 40 min Cure time at 23 °C and 50 % HR > 3.5 mm/24 h

• Final Shore A hardness (ISO 868 – 3 seconds) 60 to 65 Shearing resistance at 5 h at 23 °C and 50 % HR (Ford SAE J 1529) > 130 psi Shearing resistance at 7 d at 23 °C and 50 % HR (Ford SAE J 1529) > 500 psi

• Water and salt spray resistance Excellent Specific data Elongation at break (ISO 37) : > 700 % Modulus at break (ISO 37) : > 870 psi Crash test (standard FMVSS 212): resists after 3 hours at 23 °C and 50 % RH

INSTRUCTIONS FOR USE

Substrates preparation :

The windscreen has to be treated as follows :

• on raw glass, clean with the degreaser SAPOCOL 1001 and then apply the primer SAPOCOL 2001 BLACK.

• on ceramic frit glass, degrease with ethanol and then apply EMFIPRIM 34022A or 34027A.

• on encapsulated windscreen, degrease with methylethylketone (MEK) or acétone (do not use alcohol) and then apply EMFIPRIM 34025A.

• on windscreen coated with a primer, degrease with MEK or acetone.• Never clean the old sealant with a solution containing alcohol.

Bonding :

When the primer is dry, the sealant K 5 POLYSEAL GL is applied with a pneumatic or a hand gun, or a robot. In order to develop its full mechanical properties, the product must be

1

applied at a temperature between 5 and 35 °C. The shape of the joint is given by the nozzle.

The glass coated with the sealant must be applied and pressed on the second substrate before the end of the tack free time. Take care that this time (which decreases when temperature increases) is not exceeded. Avoid any contact with non-cured MS, hybrid PU or silicone sealants as well as with alcohols or ammonia during curing.

Cleaning :

Tools can be cleaned with EMFINET 683, xylene, MEK or acetone before curing.After curing, mechanical cleaning is required.

STORAGE AND SHELF LIFE

• 9 months in hermetically sealed original cartridges or sausages between 5 and 25 °C• 6 months in drums between 5 and 25 °C• Tél : 03 88 90 60 00 - Fax : 03 88 73 48 38• Internet : http://www.emfi.com - Mél. : [email protected]• Rédacteur : AC

PACKAGING

K 5 POLYSEAL GL is available in 310 ml aluminium cartridges, 400 and 600 ml sausages, in 240 kg drums.

SAFETY

Harmful. Read material safety data sheet before use.The technical data contained herein is based on our present knowledge and experience and we cannot be held liable for any errors, inaccuracies, omissions or editorial failings that result from technological changes or research between the date of issue of this document and the date the product is acquired.

Before using the product, the user should carry out any necessary tests in order to ensure that the product is suitable for the intended application.

Moreover, all users should contact the seller or the manufacturer of the product for additional technical information concerning its use if they think that the information in their possession needs to be clarified in any way, whether for normal use or a specific application of our product.

Our guarantee applies within the context of the statutory regulations and provisions in force, current professional standards and in accordance with the stipulations set out in our general sales conditions.

The information detailed in the present technical data sheet is given by way of indication and is not exhaustive. The same applies to any information provided verbally by telephone to any prospective or existing customer.

Code produit : 74054A - édition du 24-02-2009

1

mailto:[email protected]

K CRETE SPSUPERPLASTICISER

DESCRIPTION

K CRETE SP is supplied as brown liquid based on sulphonated Napthalene for formaldehyde condensates. The powerful dispering action of superplasticiser can be used in many ways to obtain dense, high strength durable concrete (M25, M30 and M35). The high water reduction upto 30% make K CRETE SP ideal for use in precast concrete where high early strength are of paramount importance. K CRETE SP is chloride free.

INCREASED WORKABILITY: K CRETE SP when incorporated in concrete mixes increases the workability without addition of water; thus leading to easy placement and finishing without the risk of segregation and bleeding.

INCREASED STRENGTH: K CRETE SP can be used to reduce upto 30% water for a given workability leading to increase in early and ultimate strengths. Such high early strengths and early stripping of form work lead to increased productivity on precast concrete and the production of high strength concrete without increasing cement content.

ADVANTAGES

• Use in precast concrete work• Increased strength 0- high early and ultimate strength, if water reduction is taken advantage of • Safe in prestressed concrete improves cohesion thus aids pumping of concrete • Facilitates rapid placing of concrete and with little or no vibration• Makes the concrete denser, hence durability increased• High water reductions upto 30%

PURPOSE

To produce high strength concrete and flowing concrete without addition of water. Enables high water reduction upto 30% leading to high early and ultimate strength . Ideal in precast concrete works.

PRODUCT

To produce high strength concrete and flowing concrete without addition of water. Enables high water reduction upto 30% leading to high early and ultimate strength. Ideal in precast concrete works.

1

DOSAGE & PACKING

• 200ml to 800ml /50kg cement. However, the optimum dosage to be determined by site trials.

• 5,50,100,200litre carbuoys and drums.

TYPICAL PROPERTIES

• Physical state: Brown liquid, specific gravity:1.16 at 27oC, Chloride content: Nil as per IS 456 and BS 5075

• Air entrainment: Less than 1%additional air entrained.• K CRETE SP can be used in mortar qrouting of prestressed wires.

The normal dosage is 200ml to 800ml per 50kg cement. However, higher dosages can be used upto 0.8 litres with suitable changes in the mix especially sand to avoid segregation if no water reduction is made.

Over dosing upto double the normal dosage levels may lead to retardation of settings times and may tend to segregrate and produce ultra fluid concrete.

HANDLING PRECAUTIONS

K CRETE SP is non toxic. However, splashed on the skin should be washed well water and if contact with eye occurs, wash well with water and seek medical advice.

STORAGE LIFE

Minimum one year if stored below 50oC in original sealed containers. If allowed to stand sound for a long time, container should be stirred well before use.

1

K PLAST IPWATERPROOF PLASTER ADDITIVE

DESCRIPTION

KPLAST IP is supplied as ready to use powder which should be dry mix in mortar. It introduces air into mortar in the form of extremely fine and evenly dispersed bubbles. This entrained air imparts improved workability which, due to the stability of the tiny bubbles, prevents premature stiffening and avoids the need for repeated "knocking up". In the hardened mortar these minute bubbles provide a cautionary effect in screeds or renders. Capillary channels are also made discontinuous by the formation of the bubbles, thus reducing the penetration of water.LIME MIXES : Addition of lime to cement mortar mix to improve plasticity can be completely omitted and replacement should be made with KPLAST IP very economically

USES

K PLAST IP is waterproof plaster additive available in powder form, for cement mortar, conforming to BS-4887 & IS - 2645 : Part-1 : 1999.

ADVANTAGES

Reduces the permeability, particularly in low cement content and high water/cement ratio mixes.

Prolonged workability Easier spreading of mortar and easy placing of bricks and blocks Reduces mortar droppings from surface Improves finishing. Greater resistance to frost damage during construction Protection against freeze-thaw damage after construction

Increases durability and watertightness by protecting against the ingress of dampness, soluble salts and other aggressive chemicals.

Increased yield of mortar results into cost benefits Reduces drying shrinkage cracks. YIELD :KPLAST IP will increase the yield of the mortar significantly. (depending on type

of Sand).

1


PACKING & DOSAGE

200 gms pouch, 1 kg/5 kg/25kg HDPE bags. KPLAST IP is supplied in powder form and should be drymixed into the mortar and water should be added as required slowly with continuous mixing.

200GM PER 50KG CEMENT

SHELF LIFE


HEALTH & SAFETY

KPLAST IP is non-hazardous. It should not be swallowed or allowed to come into contact with skin or eyes. Suitable protective goggles and gloves should be worn. In the case of contact with eyes, rinse immediately with plenty of water and seek medical advice. If swallowed, seek medical attention immediately, do not induce vomiting.

NOTE

All information is given in good faith on the results gained from experience and tests. However, all recommendations or suggestions are made without guaranteesince we don't have any control on site conditions and its uses.

1

BENEFITS

• Chloride free - safe in prestressedand reinforced concrete. • Produces exceptionally high early strength. • Plasticising action gives increased workability and/or increased strength. • Early setting improves frost resistance. • Suitable for bricklaying mortar mixes. • Particularly effective in concrete at low temperatures.

USES

To accelerate the setting and early strength gain of Portland cement concrete and mortar mixes without the introduction of chloride. Acts as a plasticiser, so gives significant increases in both ultimate and early strengths. Typical applications include precast concrete, concrete placed in cold weather, concrete for repairs, mortars for brickwork.

DESCRIPTION

FAIRCRETE NC is a chloride free plasticiser to accelerate the strength in the concrete which is ideally useful for cold weather. Gives additional frost protection by reducing the water content and accelerating hydration of cement.

PACKING

• FAIRCRETE NC is supplied in 1 ltr., 5 ltr., 10 ltr., 50 ltr., & 100 ltr.

DOSAGE

• The recommended dosage range for standard concrete and mortar mixes with all grades of Portland cement is 1 to 2 litres per 50 kg cement. Exact dosage canbe determine by site trials.

PROPERTIES

• Specific gravity : 1.25 at 300C ; Calcium chloride content : Nill to BS 5075 ; Air entrainment : Less than 1%.

• Compatibility with cements : May be used with all types of Portland cements. Not suitable for use with high Alumina cement. Acceleration : The addition of FAIRCRETE NC to portland cement concrete mixer accelerates both the setting and strength gain. The strength improvments are most significant during the first 18 hours.

• Long Term Effects : Accelerated corrosion testing of steel in concrete has shown that FAIRCRETE NC does not attect the protection of steel against corrosion even at four times the normal does level.

• Mixing : FAIRCRETE NC should be stirred well before use.Overdosage : An overdose of double the recommended amount of FAIRCRETE NC will result in excessive acceleration.

1

• Dispensing : The correct quantity of FAIRCRETE NC should be measured by means of a recommended dispenser. The company's technical department should be consulted regarding suitable equipment and its installation. FAIRCRETE NC should be added direct into the mixer. Best results are obtained when added at the same time as the mixing water.

• Curing : A concrete curing membrane should be used, or alternative methods such as polythene, water spray or wet hessian.

• Cleaning : Spillages of FAIRCRETE NC can be removed with water.

STANDARD

• FAIRCRETE NC complies with BS 5075 Part 1 and ASTM C 494 Type C.

SHELF LIFE

• Minimum shelf life of 12 months provided the temperature has not exceeded 20C to 500C.

HEALTH & SAFETY

FAIRCRETE NC is toxic. Do not ingest. If ingested, give an emetic of common salt in water and seek immediate medical attention. Prolonged contact with skin should be avoided. Any splashes should be washed well with water. The use of rubber gloves and safety glasses is recommended. Any splashes to eyes should be flushed immediately with plenty of clean water and medical treatment sought.

QUALITY ASSURANCE

Fairmate manufactures entire range of construction chemicals under compliance of ISO 9001-2000, ISO (EMS) 14001 & OHSAS 18001 (Occupational Health and Safety) certified by KPMG Peat Marwick.

TECHNICAL SERVICES

While new advances and changes will take place one thing will never change is quality and meeting special needs of customer. Our laboratory in Baroda and technical personnel & experts are available to provide additional information and technical assistance. We are eager to work with you in development of new product and solve your problem.

1

K CRETE SPR 14HIGH RANGE WATER REDUCERAND RETARDING ADMIXTURES

DESCRIPTION

K CRETE SPR 14 is a high range water reducing agent and retarding admixture for concrete

K CRETE SPR 14 is supplied as brown liquid based on modified sulphonated Nepthalene slump retainer Plasticiser. The powerful dispersing agent of the high range water reducing super plasticizer can be used in many ways to obtain dense, high strength durable concrete (M35, M40, M45 M50). The high water reduction properties makes of K CRETE SPR 14 an ideal application in precast concrete where high early strength is of paramount importance. K CRETE SPR 14 is chloride free.

INCREASES WORKABILITY : K CRETE SPR 14 when incorporated in concrete mixes increases the workability without the risk of segregation and bleeding. K CRETE SPR 14 also retains the slump for much longer time which facilitates easy placement.

INCREASES STRENGTH : K CRETE SPR 14 can be used to reduce water content transportation and for a given workability which leads to increased early and ultimate (28 days) strength. Such a high early strength facilitates early removal of formworks.

USES

To produce high strength and flowing concrete without an additional water. Enables high water reduction to achieve high early and 28 days strength. Ideal with higher grade of concrete mix, pre stressed and precast work, pavement concrete, exposed slab concrete, mass concrete pours.

1


ADVANTAGES

Increased strength at early ages.

• High elastic modulus.• Retains the initial workability for longer time.• Shorter placing times• Can be used with higher grade of concrete.• Safe in prestressed concrete. • Improves cohesion thus aids pumping of concrete. • Makes the concrete denser, hence durability increases. • High water reduction is possible.• Chloride free.• Ideal for mass concreting, pavement concrete.

DOSAGE & PACKING

• 200 ml to 600 ml / 50 kg of cement, however, the optimum dosage, should be determined by site trials.

• 1, 5, 10, 50, 100, 200 kg carboys.

PROPERTIES

• Physical State : Brown liquid, Chloride content : Nil as per BS 5075, Air entrainment : Less than 1% additional air entrained. Specific Gravity : 1.24 + 0.015. ppH Value : 7.5 + 0.5.

• K CRETE SPR 14 can be used with all types of Portland cements and is chloride free. The normal dosage is 200ml to 700ml per 50 kg of cement. However higher dosages can be used with suitable changes in the mix, especially sand to avoid segregation if no water reduction is made.

2

• Overdosing upto double the normal dosage levels may lead to excessive retardation of setting time, and may tend to segregate and produce ultra fluid concrete.

• Typical results with use of K CRETE SPR 14 M40 grade of concrete1) 0.45 w/c ratio ; 2) 53 grade cement ; 3) Washed clean graded 20 mm and 10 mm Agt. ; 4) Sand zone II

SHELF LIFE


HEALTH & SAFETY

KCRETE SPR 14 is non-hazardous. It should not be swallowed or allowed to come into contact with skin or eyes. Suitable protective goggles and gloves should be worn. In the case of contact with eyes, rinse immediately with plenty of water and seek medical advice. If swallowed, seek medical attention immediately, do not induce vomiting.

NOTE

All information is given in good faith on the results gained from experience and tests. However, all recommendations or suggestions are made without guarantee since we don't have any control on site conditions and its uses.

3

K CRETE WPLINTERNA L HIGH PERFORMA NCE WATERPROOFING

ADDITIVE FOR CONCRETE AND PLASTER

DESCRIPTION

K CRETE WPL is high performance integral waterproofing addition, which ensures perfect water tightness to concrete and plaster surfaces. K CRETE WPL is based on high performance polymers; this reduces the permeability through out depth of concrete.

BENEFITS

• Ensure perfect watertight structure• Easy to use-simple addition into concrete & plaster.• Reduces permeability through out the depth of concrete.• Economical: very low cost 60-70 paise per sq.feet.(4” thick slab M15 grade concrete )• No side effect: chloride free & free from corrosion.• Greater protection to steel reinforcement, hence increase durability of structure.• K Crete concrete surface: Ensure good finish of the concrete:• Increase strength: Apart from waterproofing. It increases strength of concrete &plaster.• Improves plasticity and cohesion aids easier placing & better compaction.• Does not affect the setting time of the concrete and mortar.• Being liquid-disperse instantly in to concrete/plaster mixer

HOW TO USE

CONCRETE: Add very precise quantity of K CRETE WPL in quaging water and incorporate that water into concrete mix. PLASTER: Mix K CRETE WPL in precise quantity and add water into cement/sand mixture. Mix cement mortar thoroughly to ensure proper mixing.

PACKING

• K CRETE WPL available in various packing is depending upon levels 5, 10, 50,100,200ltrs packing.

DOSAGE

• K CRETE WPL can be added & 100to 250ml per 50kg bag of cement in concrete & plaster. However optimum dosage is 150ml/per 50kg bag of cement.

FREE TECHNICAL SUPPORT

• K CRETE WPL is pleased to provide technical support at your site subject to location of our office or dealer office.

1


TYPICAL PROPERTIES

• Colour: Dark Brown Based: specially produced polymers. PH: 7+_1.• Usage Instruction: Shake well before use. Do not add K CRETE WPL directly to concrete.

HEALTH AND SAFETY

• K CRETE WPL is mild alkaline splashes on skin should be washed with water. If contact with eyes Occurs wash with plenty of water and seek medical help.

2

PRODUCT DESCRIPTION PROPERTIES BENEFITS

Documents

Transcript of PRODUCT DESCRIPTION PROPERTIES BENEFITS