Product Description - Cornerstone OnDemand · Product Description Issue 02 Date 2011-03-28 Symantec...
Transcript of Product Description - Cornerstone OnDemand · Product Description Issue 02 Date 2011-03-28 Symantec...
NetBackup 5200
Release 1.2
Product Description
Issue 02
Date 2011-03-28
Symantec Corporation
Symantec provides customers with comprehensive technical support and service. For any assistance, pleasecontact our local office or company headquarters.
Symantec CorporationAddress: 350 Ellis St, Mountain View CA 94043
Website: http://www.symantec.com
Copyright © Symantec Corporation. 2010-2011. All rights reserved.No part of this document may be reproduced or transmitted in any form or by any means without prior writtenconsent of Symantec Corporation. Trademarks and Permissions
and other Symantec trademarks are trademarks of Symantec Corporation.All other trademarks and trade names mentioned in this document are the property of their respective holders. NoticeThe purchased products, services and features are stipulated by the contract made between Symantec andthe customer. All or part of the products, services and features described in this document may not be withinthe purchase scope or the usage scope. Unless otherwise specified in the contract, all statements, information,and recommendations in this document are provided "AS IS" without warranties, guarantees or representationsof any kind, either express or implied.
The information in this document is subject to change without notice. Every effort has been made in thepreparation of this document to ensure accuracy of the contents, but all statements, information, andrecommendations in this document do not constitute the warranty of any kind, express or implied.
Symantec Corporation
Contents
About This Document.....................................................................................................................1
1 Product Introduction.................................................................................................................1-11.1 Product Appearance........................................................................................................................................1-21.2 Product Configuration.....................................................................................................................................1-21.3 Hardware Structure.........................................................................................................................................1-31.4 Panel................................................................................................................................................................1-6
1.4.1 Front Panel.............................................................................................................................................1-71.4.2 Rear Panel..............................................................................................................................................1-8
1.5 Features.........................................................................................................................................................1-151.6 Technical Specifications...............................................................................................................................1-161.7 Environmental Requirements........................................................................................................................1-171.8 Standards Compliant and Certificates...........................................................................................................1-18
2 Product Components.................................................................................................................2-12.1 Chassis.............................................................................................................................................................2-22.2 Disk Module....................................................................................................................................................2-22.3 Power Module.................................................................................................................................................2-42.4 Backplane........................................................................................................................................................2-52.5 Fan Module.....................................................................................................................................................2-72.6 Mainboard.......................................................................................................................................................2-92.7 RAID Card....................................................................................................................................................2-112.8 10GE NIC......................................................................................................................................................2-112.9 GE NIC (Configuration Mode 1).................................................................................................................2-132.10 8Gb FC HBA...............................................................................................................................................2-14
3 Device Cable...............................................................................................................................3-13.1 Power Cable and Grounding Cable.................................................................................................................3-2
3.1.1 Power Cable...........................................................................................................................................3-23.1.2 Grounding Cable....................................................................................................................................3-4
3.2 Signal Cable....................................................................................................................................................3-53.2.1 Network Cable........................................................................................................................................3-53.2.2 Multi-Mode Fiber...................................................................................................................................3-63.2.3 Serial Cable............................................................................................................................................3-7
NetBackup 5200Product Description Contents
Issue 02 (2011-03-28) Symantec Corporation i
A Abbreviations and Acronyms................................................................................................A-1
ContentsNetBackup 5200
Product Description
ii Symantec Corporation Issue 02 (2011-03-28)
Figures
Figure 1-1 NetBackup 5200 appearance.............................................................................................................1-2Figure 1-2 Overall hardware structure of the NetBackup 5200...........................................................................1-5Figure 1-3 PCI-E slots on the mainboard (Configuration mode 1)......................................................................1-6Figure 1-4 PCI-E slots on the mainboard (Configuration mode 2)......................................................................1-6Figure 1-5 Front view of the NetBackup 5200.....................................................................................................1-7Figure 1-6 Disk slots of the NetBackup 5200......................................................................................................1-8Figure 1-7 Rear view of the NetBackup 5200......................................................................................................1-9Figure 1-8 Ports of the NetBackup 5200 ...........................................................................................................1-10Figure 1-9 Rear view of the NetBackup 5200....................................................................................................1-13Figure 1-10 Ports of the NetBackup 5200..........................................................................................................1-14Figure 2-1 Appearance of the chassis...................................................................................................................2-2Figure 2-2 Disk module........................................................................................................................................2-3Figure 2-3 AC power module...............................................................................................................................2-4Figure 2-4 Front view...........................................................................................................................................2-6Figure 2-5 Rear view............................................................................................................................................2-6Figure 2-6 Fan module.........................................................................................................................................2-7Figure 2-7 Location of the fan module and fan indicators...................................................................................2-8Figure 2-8 Appearance of the mainboard...........................................................................................................2-10Figure 2-9 Appearance of the RAID card..........................................................................................................2-11Figure 2-10 10GE NIC.......................................................................................................................................2-12Figure 2-11 4-port GE NIC...............................................................................................................................2-13Figure 2-12 8Gb FC HBA..................................................................................................................................2-15Figure 3-1 Structure of the AC power cable........................................................................................................3-3Figure 3-2 Structure of the grounding cable.........................................................................................................3-4Figure 3-3 Structure of the network cable............................................................................................................3-5Figure 3-4 Structure of the multi-mode fiber.......................................................................................................3-7Figure 3-5 Structure of the serial cable................................................................................................................3-7
NetBackup 5200Product Description Figures
Issue 02 (2011-03-28) Symantec Corporation iii
Tables
Table 1-1 Product configuration of the NetBackup 5200.....................................................................................1-2Table 1-2 The parts of the NetBackup 5200.........................................................................................................1-4Table 1-3 Description of the indicators of the NetBackup 5200..........................................................................1-7Table 1-4 Description of the ports of the rear view............................................................................................1-10Table 1-5 Description of the indicators of the NetBackup 5200........................................................................1-11Table 1-6 Description of indicators on the 10GE NIC.......................................................................................1-12Table 1-7 Description of indicators on the 4-port GE NIC................................................................................1-12Table 1-8 Description of indicators on the 8Gb FC HBA..................................................................................1-12Table 1-9 Description of the ports on the NetBackup 5200...............................................................................1-14Table 1-10 Features of the NetBackup 5200......................................................................................................1-15Table 1-11 Technical specifications of the NetBackup 5200.............................................................................1-17Table 1-12 Environmental requirements of the NetBackup 5200 .....................................................................1-17Table 1-13 Protocols and standards that the NetBackup 5200 complies with...................................................1-18Table 1-14 Safety standards and EMC standards...............................................................................................1-18Table 1-15 Industry standards............................................................................................................................1-19Table 1-16 Certificates.......................................................................................................................................1-20Table 2-1 Technical specifications.......................................................................................................................2-5Table 2-2 Port description....................................................................................................................................2-7Table 2-3 Technical specifications of the fan module..........................................................................................2-8Table 2-4 Description of indicators on the 10GE NIC.......................................................................................2-12Table 2-5 Description of ports on 10GE NIC.....................................................................................................2-12Table 2-6 Technical specifications of the 10GE NIC.........................................................................................2-13Table 2-7 Description of indicators on the 4-port GE NIC................................................................................2-14Table 2-8 Description of ports on 4-port GE NIC..............................................................................................2-14Table 2-9 Technical specifications of the 4-port GE NIC..................................................................................2-14Table 2-10 Description of indicators on the 8Gb FC HBA................................................................................2-15Table 2-11 Description of ports on 8Gb FC HBA..............................................................................................2-16Table 2-12 Technical specifications of the 8Gb FC HBA..................................................................................2-16Table 3-1 Cable connection list of the power cable.............................................................................................3-3Table 3-2 Technical specifications of the power cable........................................................................................3-4Table 3-3 Technical specifications of the grounding cable..................................................................................3-4Table 3-4 Cable connection list of the network cable..........................................................................................3-6Table 3-5 Technical specifications of the network cable.....................................................................................3-6
NetBackup 5200Product Description Tables
Issue 02 (2011-03-28) Symantec Corporation v
Table 3-6 Technical specifications of the multi-mode fiber.................................................................................3-7Table 3-7 Cable connection list of the serial cable...............................................................................................3-8Table 3-8 Technical specifications of the serial cable..........................................................................................3-8
TablesNetBackup 5200
Product Description
vi Symantec Corporation Issue 02 (2011-03-28)
About This Document
Product VersionThe following table lists the product version related to this document.
Product Name Product Version
NetBackup 5200 Release 1.2
Intended AudienceThis documents describes the hardware compositions, features and functions of each hardwaremodule, appearance and technical indexes, and cable layout and technical indexes of theNetBackup 5200.
This document is intended for the following audience:
l Network planning engineers
l Hardware installation engineers
l Installation debugging engineers
l Field maintenance engineers
l System maintenance engineers
Symbol ConventionsThe symbols that may be found in this document are defined as follows.
Symbol Description
DANGERIndicates a hazard with a high level of risk, which if notavoided, may result in death or serious injury.
WARNINGIndicates a hazard with a medium or low level of risk, whichif not avoided, could result in minor or moderate injury.
NetBackup 5200Product Description About This Document
Issue 02 (2011-03-28) Symantec Corporation 1
Symbol Description
CAUTIONIndicates a potentially hazardous situation, which if notavoided, could result in equipment damage, data loss,performance degradation, or unexpected results.
TIP Indicates a tip that may help you solve a problem or savetime.
NOTE Provides additional information to emphasize or supplementimportant points of the main text.
Update HistoryUpdates between document revisions are cumulative. Therefore, The latest version of thisdocument contains all of the updates that were made in previous versions.
Updates in Issue 02 (2011-03-28)The second commercial release. The updated contents are as follows.
Modify slot configurations. Add 8Gb FC HBA and 4-port GE NIC. For details,see "1.1 ProductAppearance".
Updates in Issue 01 (2010-08-30)Initial commercial release.
About This DocumentNetBackup 5200
Product Description
2 Symantec Corporation Issue 02 (2011-03-28)
1 Product Introduction
About This Chapter
The NetBackup 5200 is an integrated backup device with high-density and high-performance.It consists of the backup device, backup software, and backup media. The NetBackup 5200fulfills the unified management of the software and hardware, which reduces operations andmaintenance cost, and minimizes the total cost of ownership (TCO).
1.1 Product AppearanceThis section describes the appearance of the NetBackup 5200.
1.2 Product ConfigurationThis section describes the hardware configuration of the NetBackup 5200.
1.3 Hardware StructureThis section describes the hardware structure of the NetBackup 5200.
1.4 PanelThis section describes the front panel, rear panel, ports, and indicators of the NetBackup 5200.
1.5 FeaturesThis section describes the features of the NetBackup 5200, such as energy saving, large capacity,reliability, and manageability.
1.6 Technical SpecificationsThis section describes the technical specifications of the NetBackup 5200.
1.7 Environmental RequirementsThis section describes the requirements of the NetBackup 5200 on the operating environmentand storage environment.
1.8 Standards Compliant and CertificatesThis section describes the standards that the NetBackup 5200 complies with and the certificatesthat the NetBackup 5200 has obtained.
NetBackup 5200Product Description 1 Product Introduction
Issue 02 (2011-03-28) Symantec Corporation 1-1
1.1 Product AppearanceThis section describes the appearance of the NetBackup 5200.
The NetBackup 5200 is 4U high and contains 24 disks. Figure 1-1 shows the appearance of theNetBackup 5200.
Figure 1-1 NetBackup 5200 appearance
l The height, width, and depth of the NetBackup 5200 are respectively 175 mm, 446 mm,685 mm.
l It can be installed in a standard 19-inch cabinet or in a cabinet with a depth of 1,000 mm(or larger).
1.2 Product ConfigurationThis section describes the hardware configuration of the NetBackup 5200.
Table 1-1 lists the product configuration of the NetBackup 5200.
Table 1-1 Product configuration of the NetBackup 5200
Item Index
Basic feature 4U a/ 24 disk slots
Processor type andquantity
Two quad-core E5620 CPUs
Memory type andcapacity
l Memory capacity: 32GB
l DDR3 b
1 Product IntroductionNetBackup 5200
Product Description
1-2 Symantec Corporation Issue 02 (2011-03-28)
Item Index
Disk type and quantity l Twenty-four 2 TB 7,200 rpm SATA c disks
l Maximum raw capacity: 48 TB
RAID level RAID 1 and RAID 6l System disk: RAID 1
l Data disk: RAID 6
I/O port l One 100 Mbit/s IPMI management network port
l One VGA d port
l One RJ-45 serial port, with a transfer rate of 115,200 baud rate
l Two USB e 2.0 ports
l Two GE f service network ports, with the RJ-45 connector andlink/active indicator
l Configuration mode 1:– Two 10GE service network ports or four GE service network
ports– Two 8Gb FC ports
l Configuration mode 2:Six 8Gb FC ports
a: 1 U = 44.45 mmb: 3rd Generation Double Data Rate SDRAMc: Serial Advanced Technology Attachmentd: Video Graphics Arraye: Universal Serial Busf: Gigabit Ethernet
1.3 Hardware StructureThis section describes the hardware structure of the NetBackup 5200.
The NetBackup 5200 can be configured in two modes, as shown in Table 1-2.
NetBackup 5200Product Description 1 Product Introduction
Issue 02 (2011-03-28) Symantec Corporation 1-3
Table 1-2 The parts of the NetBackup 5200
Configuration mode 1 Configuration mode 2
l Chassis
l Disk module
l Power module
l Backplane
l Fan module
l Mainboard
l RAID (Redundant array of independentdisks) card
l 10GE NIC(Gigabit Ethernet NetworkInterface) or 4-port GE NICa
l 8Gb FC HBA (Fiber Channel Host BusAdapter)
l Chassis
l Disk module
l Power module
l Backplane
l Fan module
l Mainboard
l RAID card
l 8Gb FC HBA
a: You can choose from 10GE NIC and 4-port GE NIC, you can only choose one of them.
The NetBackup 5200 adopts the modular design. Figure 1-2 shows the overall hardwarestructure of the NetBackup 5200.
1 Product IntroductionNetBackup 5200
Product Description
1-4 Symantec Corporation Issue 02 (2011-03-28)
Figure 1-2 Overall hardware structure of the NetBackup 5200
1 Disk module 4 Backplane
2 Chassis 5 Power module
3 Fan module 6 Mainboard
Figure 1-3 shows the four PCI-E slots resides on the mainboard when configuration mode 1 isemployed.
NetBackup 5200Product Description 1 Product Introduction
Issue 02 (2011-03-28) Symantec Corporation 1-5
Figure 1-3 PCI-E slots on the mainboard (Configuration mode 1)
12 3 4
1 Slot 0: RAID card 3 Slot 2: 10GE NIC or 4-port GE NIC
2 Slot 1: None 4 Slot 3: 8Gb FC HBA
Figure 1-4 shows the four PCI-E slots resides on the mainboard when configuration mode 2 isemployed.
Figure 1-4 PCI-E slots on the mainboard (Configuration mode 2)
12 3 4
1 Slot 0: RAID card 3 Slot 2: 8Gb FC HBA
2 Slot 1: 8Gb FC HBA 4 Slot 3: 8Gb FC HBA
1.4 PanelThis section describes the front panel, rear panel, ports, and indicators of the NetBackup 5200.
1 Product IntroductionNetBackup 5200
Product Description
1-6 Symantec Corporation Issue 02 (2011-03-28)
1.4.1 Front PanelThis section describes the front panel of the NetBackup 5200.
1.4.2 Rear PanelThis section describes the rear view of the NetBackup 5200.
1.4.1 Front PanelThis section describes the front panel of the NetBackup 5200.
Figure 1-5 shows the front view of the NetBackup 5200.
Figure 1-5 Front view of the NetBackup 5200
1 Disk handle 5 Enclosure handle
2 Disk module 6 Disk read/write status indicator
3 System power indicator 7 Disk online status indicator
4 System alarm/location indicator
Table 1-3 lists the indicators of the front view.
Table 1-3 Description of the indicators of the NetBackup 5200
Location Type Color Status Description
Chassis System powerindicator
Green On The device is powered on.
- Off The device is not powered on.
System alarm/locationindicator
Red On An alarm occurred on the device.
Blinking A fault occurred on the powermodule.
NetBackup 5200Product Description 1 Product Introduction
Issue 02 (2011-03-28) Symantec Corporation 1-7
Location Type Color Status Description
Orange On Locating the device a.
- Off The device is running normally.
SATA diskmodule
Disk onlinestatus indicator
Green On The disk is powered on normally.
Red On A disk alarm occurred or the diskis not ready.
- Off The disk is not powered on.
Disk read/writestatus indicator
Green Blinking Data is being transferred.
- Off No data is being transferred.
a: A location command is sent through the management system.
From bottom to top and right to left, the 24 slots of the NetBackup 5200 are numbered from ato x, with the bottom right one numbered a. The slot number a, b, c...v, w, or x correspond tothe slot number 0, 1, 2...21, 22, or 23.
Figure 1-6 shows the disk slots.
NOTE
l Disks in slot a and slot b are system disks that form a RAID 1 group. Do not remove or insert the systemdisks unnecessarily. Otherwise, the system data may be damaged.
l Disks in slot c and slot d are the global hot spare disks.
l Disks in other slots are data disks that form a RAID 6 group.
Figure 1-6 Disk slots of the NetBackup 5200
Slot a
Slot b
Slot c
Slot d
Slot e
Slot f
Slot g
Slot l
Slot m
Slot r
Slot s
Slot x
1.4.2 Rear PanelThis section describes the rear view of the NetBackup 5200.
1 Product IntroductionNetBackup 5200
Product Description
1-8 Symantec Corporation Issue 02 (2011-03-28)
Configuration Mode 1
Figure 1-7 shows the rear view of the NetBackup 5200.
Figure 1-7 Rear view of the NetBackup 5200
2PORT 2
48
2PORT 1
48
2PORT 2
48
2
TXR
XTX
RX
PORT 148
2PORT 2
48
2PORT 1
48
1 System power switch 11 Link indicator of the service network port
2 System reset button 12 VGA port
3 Slot 3: 8Gb FC HBA 13 Serial port
4 Slot 2: 10GE NIC or 4-port GE NIC 14 USB 2.0 port
5 Slot 0: RAID card 15 Power fan
6 System alarm/location indicator 16 Power module handle
7 Link indicator of the management network port 17 Power run/alarm indicator
8 Active indicator of the management network port 18 Power socket
9 Service network port 19 Power module spring leaf
10 Active indicator of the service network port
Figure 1-8 shows the ports of the NetBackup 5200.
NetBackup 5200Product Description 1 Product Introduction
Issue 02 (2011-03-28) Symantec Corporation 1-9
Figure 1-8 Ports of the NetBackup 5200
2PORT 2
48
2PORT 1
48
1 8Gb FC port 5 Service network port (NIC 2)
2 10GE service network port or GE servicenetwork port
6 VGA port
3 IPMI management network port 7 Serial port
4 Service network port (NIC 1) 8 USB 2.0 port
Table 1-4 lists the ports of the rear view.
Table 1-4 Description of the ports of the rear view.
Name Quantity Model Function
USB 2.0 port 2 A Connects the mouse, keyboard, and otherUSB 2.0 devices.
Serial port 1 RJ45 Extends functions of the OS and third-partysoftware.
VGA port 1 D15 Connects to the monitor.
Managementnetwork port
1 RJ45 Device hardware is managed through thisFast Ethernet (FE) port.
Servicenetwork port(NIC 1)
1 RJ45 NIC 1 is a management network port and itsIP address is 192.168.1.1/24. Through this IPaddress, the user can log in to the OS forconfiguration. NIC 1 is connected to themanagement computer.
Servicenetwork port(NIC 2)
1 RJ45 Connects to the backup network.
10GE servicenetwork port
2 or 0 SFP+ Connects to the backup network.
1 Product IntroductionNetBackup 5200
Product Description
1-10 Symantec Corporation Issue 02 (2011-03-28)
Name Quantity Model Function
GE servicenetwork port
4 or 0 RJ45 Connects to the backup network.
8Gb FC port 2 SFP+ l Connects to a tape library.
l Connects to the backup network.
Table 1-5 lists the indicators of the rear view.
Table 1-5 Description of the indicators of the NetBackup 5200
Location Type Color Status Description
Powermodule
Power running/alarm indicator
Green On The AC power is normal.
Green Blinking The AC input is normal, and thedevice is not powered on.
Orange On A power alarm occurred.
- Off The power module failed or is notconnected to the main powersupply.
Mainboard Fan running/alarm indicator
Green On The fan is running normally.
Red On A fan alarm occurred.
Rear panel Link indicator ofmanagementnetwork port
Green On The link of the managementnetwork port is normal.
- Off No link.
Active indicatorof themanagementnetwork port
Yellow Blinking Data is being transferred.
- Off No data is being transferred.
Link indicator ofthe servicenetwork port
Green On Data is being transferred at a rateof 1,000 Mbit/s.
Yellow On Data is being transferred at a rateof 100 Mbit/s.
- Off Data is being transferred at a rateof 10 Mbit/s, or no link.
Active indicatorof servicenetwork port
Yellow Blinking Data is being transferred.
- Off No data is being transferred.
Table 1-6 lists the indicators of the 10GE NIC.
NetBackup 5200Product Description 1 Product Introduction
Issue 02 (2011-03-28) Symantec Corporation 1-11
Table 1-6 Description of indicators on the 10GE NIC
Type Color Status Description
ACT/LNK
Green Blinking The link is normal and data is being transferred.
Green On The link is normal.
- Off No link.
GRN=10G
- Off No link.
Green On Data is being transferred at a rate of 10 Gbit/s.
Yellow On Data is being transferred at a rate of 1 Gbit/s.
Table 1-7 lists the indicators of the 4-port GE NIC.
Table 1-7 Description of indicators on the 4-port GE NIC
Type Color Status Description
ACT
Green Blinking The link is normal and data is being transferred.
Green On The link is normal.
- Off No link.
LNK
- Off Data is being transferred at a rate of 10 Mbit/s.
Green On Data is being transferred at a rate of 100 Mbit/s.
Amber On Data is being transferred at a rate of 1 Gbit/s.
Table 1-8 lists the indicators of the 8Gb FC HBA.
Table 1-8 Description of indicators on the 8Gb FC HBA
8/Yellow 4/Green 2/Amber Description
Off Off Off Power off.
Off Off On/Blinking Data is being transferred at a rate of 2 Gbit/s.
Off On/Blinking Off Data is being transferred at a rate of 4 Gbit/s.
On/Blinking Off Off Data is being transferred at a rate of 8 Gbit/s.
On On On Power on (before firmware initialization).
Blinking Blinking Blinking Power on (after firmware initialization).
1 Product IntroductionNetBackup 5200
Product Description
1-12 Symantec Corporation Issue 02 (2011-03-28)
8/Yellow 4/Green 2/Amber Description
Blinking alternately Firmware error.
Configuration Mode 2Figure 1-9 shows the rear view of the NetBackup 5200.
Figure 1-9 Rear view of the NetBackup 5200
2PORT 2
48
2PORT 1
48
2PORT 2
48
2PORT 1
48
2PORT 2
48
2PORT 1
48
2PORT 2
48
2
TXR
XTX
RX
PORT 148
2PORT 2
48
2PORT 1
48
1 System power switch 11 Active indicator of the service networkport
2 System reset button 12 Link indicator of the service network port
3 Slot 3: 8Gb FC HBA 13 VGA port
4 Slot 2: 8Gb FC HBA 14 Serial port
NetBackup 5200Product Description 1 Product Introduction
Issue 02 (2011-03-28) Symantec Corporation 1-13
5 Slot 1: 8Gb FC HBA 15 USB 2.0 port
6 Slot 0: RAID card 16 Power fan
7 System alarm/location indicator 17 Power module handle
8 Link indicator of the management network port 18 Power run/alarm indicator
9 Active indicator of the management network port 19 Power socket
10 Service network port 20 Power module spring leaf
Figure 1-10 shows the ports of the NetBackup 5200.
Figure 1-10 Ports of the NetBackup 5200
2PORT 2
48
2PORT 1
48
2PORT 2
48
2PORT 1
48
2PORT 2
48
2PORT 1
48
1 8Gb FC port 6 Service network port (NIC 2)
2 8Gb FC port 7 VGA port
3 8Gb FC port 8 Serial port
4 IPMI management network port 9 USB 2.0 port
5 Service network port (NIC 1)
Table 1-9 lists the ports on the NetBackup 5200.
Table 1-9 Description of the ports on the NetBackup 5200
Name Quantity Model Function
USB 2.0 port 2 A Connects the mouse, keyboard, and otherUSB 2.0 devices.
Serial port 1 RJ45 Extends functions of the OS and third-partysoftware.
VGA port 1 D15 Connects to the monitor.
1 Product IntroductionNetBackup 5200
Product Description
1-14 Symantec Corporation Issue 02 (2011-03-28)
Name Quantity Model Function
Managementnetwork port
1 RJ45 Device hardware is managed through thisFast Ethernet (FE) port.
Servicenetwork port(NIC 1)
1 RJ45 NIC 1 is a management network port and itsIP address is 192.168.1.1/24. Through this IPaddress, the user can log in to the OS forconfiguration. NIC 1 is connected to themanagement computer.
Servicenetwork port(NIC 2)
1 RJ45 Connects to the backup network.
8Gb FC port 6 SFP+ l Connects to a tape library.
l Connects to the backup network.
Table 1-5 lists the indicators of the rear view.
Table 1-8 lists the indicators of the 8Gb FC HBA.
NOTE
When the NetBackup 5200 is configured with only one power module, the power module is installed inposition 18 in Figure 1-7 and position 19 in Figure 1-9.
1.5 FeaturesThis section describes the features of the NetBackup 5200, such as energy saving, large capacity,reliability, and manageability.
Table 1-10 lists the features of the NetBackup 5200.
Table 1-10 Features of the NetBackup 5200
Feature Description
Energy saving l Supports disk soft start after power-on, controlling the disk startupcurrent and reducing the overall power consumption of the device.
l Supports high-efficiency power modules, reducing powerconsumption.
l Supports intelligent fan speed control, reducing the powerconsumption of devices.
NetBackup 5200Product Description 1 Product Introduction
Issue 02 (2011-03-28) Symantec Corporation 1-15
Feature Description
High performanceand large capacity
l Supports up to 24 SATA disks, with a raw capacity of up to 48 TB.
l Supports high-performance processors with low powerconsumption.
l Provides large-capacity intra-system switching bandwidths andhigh I/O throughout.
l Provides eight DIMMs a and supports 32 GB memory .
l Supports IOAT b to meet the diverse requirements on processingcapability.
l Supports RAID 1 and RAID 6.
High reliability l Supports redundant power modules.
l Supports hot-swappable disk modules and power modules.
l MTBFc > 105 h.
Easy management l Provides separate out-of-band management network interfaces,allowing customers to remotely power on, power off, and resetdevices through the network.
l Supports remotely configuring and managing devices throughKVM d over IP.
l Provides customized management interfaces, simplifyingmaintenance operations and saving maintenance labor.
l Supports DHCP e and automatically obtains the IP address from themanagement server, thus reducing configuration operations.
l Supports SNMP f Trap and automatically reports alarms.
l Supports reporting the disk information through the out-of-bandmanagement channel.
a: Dual Inline Memory Moduleb: Input/Output Acceleration Technologyc: Mean Time between Failuresd: Keyboard Video Mousee: Dynamic Host Configuration Protocolf: Simple Network Management Protocol
1.6 Technical SpecificationsThis section describes the technical specifications of the NetBackup 5200.
Table 1-11 lists the technical specifications of the NetBackup 5200.
1 Product IntroductionNetBackup 5200
Product Description
1-16 Symantec Corporation Issue 02 (2011-03-28)
Table 1-11 Technical specifications of the NetBackup 5200
Item Sub Item Index
WeightMaximum weight a 47 kg
Transportation weight b 71 kg
Dimensions H x W x D 175 mm x 446 mm x 685 mm
Power consumption Maximum power 700 W
Power parametersAC voltage range 100 V to 127 V, 200 V to 240 V
AC frequency range 47 Hz to 63 Hz
Inherentavailability of thesystem
- ≥ 99.95%
MTTR c - < 1 h
a: The maximum weight refers to the weight of the NetBackup 5200 with twenty-four diskmodules, two power modules, eight memory modules, RAID card and 8Gb FC HBA.b: The transportation weight is the sum of the maximum weight of the NetBackup 5200 andthe maximum weight of the transportation materials.c: Mean Time to Repair
1.7 Environmental RequirementsThis section describes the requirements of the NetBackup 5200 on the operating environmentand storage environment.
Table 1-12 lists the environmental requirements of the NetBackup 5200.
Table 1-12 Environmental requirements of the NetBackup 5200
Item Index
Operating temperature a 5°C to 35°C (41°F to +95°F)
Storage temperature -40°C to +70°C (-40°F to +158°F)
Transportation temperature -40°C to +70°C (-40°F to +158°F)
Temperature gradient 10°C/h
Operating humidity 10% RH to 85% RH
Operating altitude -30.5 m to +3,000 m
Storage altitude -30.5 m to +3,000 m
Operating altitude -30.5 m to +3,000 m
NetBackup 5200Product Description 1 Product Introduction
Issue 02 (2011-03-28) Symantec Corporation 1-17
Item Index
Noise b < 72 dBA
a: When the altitude ranges from -60 m to +1,800 m, the ambient temperature ranges from 5°C to 35°C. When the altitude ranges from 1,800 m to 3,000 m, the environment temperaturedecreases by 0.6°C every time the altitude increases by 100 m.b: The maximum noise of the NetBackup 5200 when the ambient temperature is 25°C.
1.8 Standards Compliant and CertificatesThis section describes the standards that the NetBackup 5200 complies with and the certificatesthat the NetBackup 5200 has obtained.
Protocols and Standards
Table 1-13 lists the protocols and standards that NetBackup 5200 complies with.
Table 1-13 Protocols and standards that the NetBackup 5200 complies with
Name Standard No.
IPMI2.0 Intelligent Platform Management Interface Specification Second Generationv2.0, Document Revision 1.0
SMBIOS System Management BIOS (SMBIOS) Reference Specification, Version 2.5
SATA II Serial ATA Working Group, Serial ATA II: Extensions to Serial ATA.Revision 1.0a
ACPI Advanced Configuration and Power Interface Specification, Revision 3.0,September 2
IP RFC0791: Internet Protocol
Safety Standards and EMC Standards
Table 1-14 lists the safety standards and EMC standards that the NetBackup 5200 complieswith.
Table 1-14 Safety standards and EMC standards
Name Standard No.
IT Equipment Safety Standard GB4943-2001
IEC standard IEC 60950-1
UL safety standard UL 60950-1
1 Product IntroductionNetBackup 5200
Product Description
1-18 Symantec Corporation Issue 02 (2011-03-28)
Name Standard No.
US EMC standard FCC, 47 CFR Part 15, Subpart B
European safety standard EN 60950-1
European EMC directive EMC Directive 2004/108/EC
European EMC standard EN 55024: 1998+A1+A2
European safety directive LVD Directive 2006/95/EC
Industry StandardsTable 1-15 lists the industry standards that the NetBackup 5200 complies with.
Table 1-15 Industry standards
Name Standard No.
Ethernet standard IEEE 802.3
FE standard IEEE 802.3u
GE standard IEEE 802.3z
IEEE standard test interface and boundary-scan architecture
IEEE 1149.1-2001
Failure mode and effects analysis (FMEA)process
IEC 812
Reliability, maintainability and availabilitystandard
IEC 863
Environmental protection ECMA TR/70
CertificatesTable 1-16 lists the certificates the NetBackup 5200 has obtained.
NetBackup 5200Product Description 1 Product Introduction
Issue 02 (2011-03-28) Symantec Corporation 1-19
Table 1-16 Certificates
Name Description
CB The IEC System for Conformity Testing to Standards for Safety of ElectricalEquipment (referred to as the IECEE) is based on the use of specific IECstandards for electrical equipment. The CB Scheme is applicable to electricalequipment within the scope of IEC standards for safety, accepted for use inthe IECEE. The Scheme becomes operative for such standards as soon as atleast one National Certification Body has declared their recognition of CB TestCertificates. The purpose of the CB Scheme is to eliminate the internationaltrade protection that is caused by the different certifications and standards ofdifferent nations.
CCC CCC (China Compulsory Certification), which is released for the productsrelating to human health and safety, lives and health of animals and plants,environmental protection, and public safety.
CE CE (Conformite Europeenne), including EMC directive 2004/108/EC and lowvoltage directive 2006/95/EC.
C-tick A product with a C-tick compliance label complies with applicable EMC andradiocommunication requirements. The C-tick label is mandatory for relatedproducts in Australia and New Zealand.
FCC Chapter 15 in FCC (Federal Communications Commission) Rules andRegulations. The device conforms to the standard for level A digital deviceaccording to the test.
REACH REGULATION (EC) No 1907/2006 OF THE EUROPEAN PARLIAMENTAND OF THE COUNCIL of 18 December 2006 concerning the Registration,Evaluation, Authorization and Restriction of Chemicals (REACH) is acompellent management rule to manage all the chemicals entering intoEuropean market preventively.
RoHS RoHS (Restriction of the Use of Certain Hazardous Substances), a directivefor environmental protection released by the EU in 2003. Management on theenvironmental impact from the electrical and electronic products during at theproduction and disposal stages. RoHS restricts the maximum amount of thehazardous substances of the products at the production stage.
UL UL (Underwriters Laboratories) is a non-profit safety test and certificationorganization.
WEEE The EU Directive on Waste of Electric and Electronic Equipment. Electricaland electronic products sold in the EU market must comply with this directiveand have the mark of cross out of the wheeled bin.
1 Product IntroductionNetBackup 5200
Product Description
1-20 Symantec Corporation Issue 02 (2011-03-28)
2 Product Components
About This Chapter
This section describes the features, operating principles, and technical specifications of theNetBackup 5200.
2.1 ChassisThis section describes the appearance, features, and technical specifications of the chassis.
2.2 Disk ModuleThis section describes the appearance, features, and technical specifications of the disk module.
2.3 Power ModuleThis section describes the features, appearance, and technical specifications of the powermodule.
2.4 BackplaneThis section describes the appearance, features, and ports of the backplane.
2.5 Fan ModuleThis section describes the appearance, features, and technical specifications of the fan module.
2.6 MainboardThis section describes the appearance, features, and portsof the mainboard.
2.7 RAID CardThis section describes the appearance and features of the RAID card.
2.8 10GE NICThis section describes the features, panels , and technical specifications of the 10GE NIC.
2.9 GE NIC (Configuration Mode 1)This section describes the features, panels, and technical specifications of the 4-port GE NIC.
2.10 8Gb FC HBAThis section describes the features, panels, and technical specifications of the 8Gb FC HBA.
NetBackup 5200Product Description 2 Product Components
Issue 02 (2011-03-28) Symantec Corporation 2-1
2.1 ChassisThis section describes the appearance, features, and technical specifications of the chassis.
AppearanceFigure 2-1 shows the appearance of the chassis.
Figure 2-1 Appearance of the chassis
FeaturesThe chassis offers the following features:l The chassis accommodates all components.
l The air channels and holes in the chassis are used to dissipate heat for all components.
Technical SpecificationsThe technical specifications of the chassis are as follows:l Dimensions (H x W x D): 175 mm x 446 mm x 685 mm.
l It can be installed in a standard 19-inch cabinet or in a cabinet with a depth of 1,000 mm(or larger).
2.2 Disk ModuleThis section describes the appearance, features, and technical specifications of the disk module.
AppearanceThe NetBackup 5200 supports 24 SATA disks. A SATA disk module consists of the disk handle,disk tray, SATA disk, and SATA convertor.
2 Product ComponentsNetBackup 5200
Product Description
2-2 Symantec Corporation Issue 02 (2011-03-28)
Figure 2-2 shows the disk module.
Figure 2-2 Disk module
1
4
32
1 Disk handle 3 SATA disk
2 Disk tray 4 SAS convertor
FeaturesThe disk module has the following features:
l Accommodates the OSThe OS of the NetBackup 5200 is installed on the system disks, disks in slot a and slot b.Figure 1-6 shows the location of slot a and slot b.
CAUTIONl Do not insert or remove the system disks while the system is powered on.
l Do not use the system disk as the hot spare disk.
l Provides the global hot spare disksThe disks in slot c and slot d are designated as the hot spare disks. Figure 1-6 shows thelocation of slot c and slot d.
l Provides storage capacityThe NetBackup 5200 can provide storage capacity for storing other data besides the systemdata on the system disks. Except for the system disks and hot spare disks, all other disk aredata disks and provide storage capacity.
CAUTIONWhen data is being read or written on disks, do not power off the device by turning off themains power or pressing the power button. Otherwise, the disks data may be damaged. Topower off the device, stop reading and writing data on the disks first and then send ashutdown command through the OS.
NetBackup 5200Product Description 2 Product Components
Issue 02 (2011-03-28) Symantec Corporation 2-3
Technical Specifications
The technical specifications of the disk module are as follows:
l 2 TB 7,200 rpm SATA disk
l Hot-swappable disks
2.3 Power ModuleThis section describes the features, appearance, and technical specifications of the powermodule.
Features
The power module provides power for the NetBackup 5200. There are two AC power moduleslots at the back of the NetBackup 5200 chassis.
The power modules support hot swapping. A fault on one power module does not affect thenormal running of the NetBackup 5200.
Appearance
The AC power module provides power for the NetBackup 5200 when the operating temperatureranges from 5℃ to 35℃ and the AC voltage ranges from 100 V to 127 V, or 200 V to 240 V.
Figure 2-3 shows the AC power module.
Figure 2-3 AC power module
1 2 3 4 5
1 Power module spring leaf 4 Power fan
2 Power socket 5 Power module handle
3 Power running/alarm indicator
For details on the indicators of the power module, see Table 1-5.
Technical Specification
Table 2-1 lists the technical specifications of the AC power module.
2 Product ComponentsNetBackup 5200
Product Description
2-4 Symantec Corporation Issue 02 (2011-03-28)
Table 2-1 Technical specifications
ParameterCategory
Parameter Value
Input features Input voltage range AC a 90 V to 264 V
Rated input voltage 100 V to 127 V/200 V to 240 V
Maximum input current ≤ 8.9 A at 90 V to 127 V
Rated input current ≤ 4.5 A at 200 V to 240 V
AC frequency range 47 Hz to 63 Hz
Output features Rated output voltage DC b 12 V/5 V
Output voltage range DC 11.4 V to 12.6 V/4.8 V to 5.25 V
Output current range 0 to 58 A/0 to 2 A
Output power 700 W
Output efficiency ≥ 80% at 100 V to 240 V
Operatingrequirements
Input overvoltage protectionrange
AC 75 V±5 V
Input overvoltage restorationrange
AC 85 V±4 V
Output overvoltage DC 13.5 V to 14.5 V/5.7 V to 6.5 V
Output current-limitingprotection
64 A to 87 A/3 A to 6 A
a: Alternating currentb: Direct current
2.4 BackplaneThis section describes the appearance, features, and ports of the backplane.
AppearanceFigure 2-4 shows the front view of the backplane.
NetBackup 5200Product Description 2 Product Components
Issue 02 (2011-03-28) Symantec Corporation 2-5
Figure 2-4 Front view
1
Figure 2-5 shows the rear view of the backplane.
Figure 2-5 Rear view
2
3
4
1 SAS connector 3 Mini SAS port
2 Backplane power supply port 4 Sideband signal port
Features
The backplane:
2 Product ComponentsNetBackup 5200
Product Description
2-6 Symantec Corporation Issue 02 (2011-03-28)
l Connects to 24 disks through the SAS connectors.
l Provides signal channels and power for 24 disks.
Port Description
Table 2-2 lists the ports on the backplane.
Table 2-2 Port description
Port Function
SAS port Connects to a SATA disk.
Backplane power supplyport
Connects to the power interface to provide power for thebackplane.
Mini SAS port Connects to the RAID card and transfers the SAS signalsbetween the mainboard and the backplane.
Sideband signal port Communicates with the mainboard through inter-integratedcircuit (IIC) signals and other signals.
2.5 Fan ModuleThis section describes the appearance, features, and technical specifications of the fan module.
Appearance
Figure 2-6 shows the appearance of the fan module.
Figure 2-6 Fan module
In Figure 2-6, fans are numbered 1, 2, 3, and 4, which correspond to the fan running/alarmindicators 1, 2, 3, and 4, as shown in Figure 2-7.
NetBackup 5200Product Description 2 Product Components
Issue 02 (2011-03-28) Symantec Corporation 2-7
Figure 2-7 Location of the fan module and fan indicators
Featuresl The fan module dissipates heat for the NetBackup 5200.
l Fans automatically regulate speed according to internal ambient temperature.
CAUTIONFaults on any fan will decrease the maximum ambient temperature that the device can tolerate.
Technical Specifications
Table 2-3 lists the technical specifications of the fan module.
Table 2-3 Technical specifications of the fan module
Parameter Category Parameter Value
Dimensions (L x W x H) 80 mm x 80 mm x 38 mm
Lead length 350 mm
Number of pins 4
Connector spacing 2.5 mm
Basic electricalparameters
Rated voltage DC 12 V
Operating voltage DC 7 V to 13.2 V
Startup voltage DC ≤ 7 V
Standard operating current 1.7 A
Maximum operating current 2.5 A
2 Product ComponentsNetBackup 5200
Product Description
2-8 Symantec Corporation Issue 02 (2011-03-28)
Parameter Category Parameter Value
Rated power 21 W
Maximum power ≤30 W
Rated rotational speed 10000 r/min
Rotational speed controlmode
PWM a
Speed adjustment modeand control signal mode
Speed adjustment voltagerange
DC -0.8 V to +20 V
Voltage range of high-levelinput signal
DC 2.8 V to 20 V
Voltage range of low-levelinput signal
DC -0.8 V to +0.4 V
Basic performanceindexes
Operating temperature -10°C to +60°C
Operating humidity 5% RH to 90% RH
Storage temperature -40°C to +70°C
Storage humidity 5% RH to 95% RH
a: Pulse-Width modulation
2.6 MainboardThis section describes the appearance, features, and portsof the mainboard.
AppearanceFigure 2-8 shows the appearance of the mainboard.
NetBackup 5200Product Description 2 Product Components
Issue 02 (2011-03-28) Symantec Corporation 2-9
Figure 2-8 Appearance of the mainboard
1 Memory socket 7 IPMI Management network port
2 USB 2.0 port 8 CPU heat sink
3 Serial port 9 Slot 0: PCI-E x 8
4 VGA port 10 Slot 1: PCI-E x 8
5 Service network port (NIC 2) 11 Slot 2: PCI-E x 8
6 Service network port (NIC 1) 12 Slot 3: PCI-E x 4
NOTE
The slot 1 in Figure 2-8 is PCI-E x 16, but only the PCI-E x 8 slot is used in actual situations. Therefore,the mainboard provides one PCI-E x 4 and three PCI-E x 8 slots.
l The RAID card is installed in slot 0 in Figure 2-8.
l (Configuration mode 1) The 10GE NIC is installed in slot 2 in Figure 2-8.
l (Configuration mode 1) The 8Gb FC HBA is installed in slot 3 in Figure 2-8.
l (Configuration mode 2) The 8Gb FC HBA is installed in slot 1, slot 2 and slot 3 in Figure2-8.
Features
The mainboard processes services and provides inband and out-of-band management andbaseboard management controller (BMC) module. It supports IPMI 2.0 and monitors andmanages devices through an inband channel and an out-of-band channel.
NOTE
The inband channel management uses a service channel to manage the NetBackup 5200, such as the servicenetwork port; the out-of-band channel management uses the management channel to manage theNetBackup 5200, such as the management network port.
2 Product ComponentsNetBackup 5200
Product Description
2-10 Symantec Corporation Issue 02 (2011-03-28)
Interface Description
Table 1-4 describes the interfaces on the mainboard.
2.7 RAID CardThis section describes the appearance and features of the RAID card.
The RAID card is plugged in the PCI-E x8 slot and used for expanding the eight SAS ports onthe mainboard by connecting the two internal Mini SAS cables to the two Mini SAS ports onthe backplane.
Appearance
Figure 2-9 shows the appearance of the RAID card.
Figure 2-9 Appearance of the RAID card
1 2
1 Mini SAS port 2 Battery Backup Unit (BBU)
Features
The RAID card has the following features:
l Flexible SAS/SATA disk array structure to reduce costs.
l Supporting RAID 1 and RAID 6 and integrating RAID functions to avoid extraconsumption on the CPU.
l Connecting SATA/SAS disks through the advanced serial technology.
l Configuring the Battery Backup Unit (BBU) to provide power failure protection.
2.8 10GE NICThis section describes the features, panels , and technical specifications of the 10GE NIC.
The 10GE NIC provides two 10GE network ports for backup.
NetBackup 5200Product Description 2 Product Components
Issue 02 (2011-03-28) Symantec Corporation 2-11
AppearanceFigure 2-10 shows the 10GE NIC.
Figure 2-10 10GE NIC
Table 2-4 lists the indicators on the 10GE NIC.
Table 2-4 Description of indicators on the 10GE NIC
Type Color Status Description
ACT/LNK
Green Blinking The link is normal and data is being transferred.
Green On The link is normal.
- Off No link.
GRN=10G
- Off No link.
Green On Data is being transferred at a rate of 10 Gbit/s.
Yellow On Data is being transferred at a rate of 1 Gbit/s.
Table 2-5 lists the ports on the 10GE NIC.
Table 2-5 Description of ports on 10GE NIC
Property Value
Connectors Two LC fiber-optic connectors
Port cables SFP+ Direct Attach cables
Data rate per port l Optical: 10 Gbit/s / 1 Gbit/s
l Direct attach: 10 Gbit/s
Network standard IEEE 802.3
2 Product ComponentsNetBackup 5200
Product Description
2-12 Symantec Corporation Issue 02 (2011-03-28)
Technical SpecificationTable 2-6 lists the technical specifications of the 10GE NIC.
Table 2-6 Technical specifications of the 10GE NIC
Item Index
Dimensions 5.73 inches long, measured without PCI-E bracket
Typical powerconsumption
l Maximum power: 10.7 W
l Typical power: 10 W
Operating temperature 0°C to 55°C (32°F to 131°F)
Storage temperature -40°C to +70°C (-40°F to +158°F)
Storage humidity 90% RH (35°C, non-condensing)
2.9 GE NIC (Configuration Mode 1)This section describes the features, panels, and technical specifications of the 4-port GE NIC.
The model of the 4-port GE NIC is Intel E1G44HT. The 4-port GE NIC provides four GEnetwork ports for backup or replication.
AppearanceFigure 2-11 shows the 4-port GE NIC.
Figure 2-11 4-port GE NIC
Table 2-7 lists the indicators on the 4-port GE NIC.
NetBackup 5200Product Description 2 Product Components
Issue 02 (2011-03-28) Symantec Corporation 2-13
Table 2-7 Description of indicators on the 4-port GE NIC
Type Color Status Description
ACT
Green Blinking The link is normal and data is being transferred.
Green On The link is normal.
- Off No link.
LNK
- Off Data is being transferred at a rate of 10 Mbit/s.
Green On Data is being transferred at a rate of 100 Mbit/s.
Amber On Data is being transferred at a rate of 1 Gbit/s.
Table 2-8 lists the description of the ports on the 4-port GE NIC.
Table 2-8 Description of ports on 4-port GE NIC
Property Value
Connectors RJ45
Port cables Category-5, UTP (Unshielded Twisted Pair)
Network standard IEEE 802.3
Technical SpecificationTable 2-9 lists the technical specifications of the 4-port GE NIC.
Table 2-9 Technical specifications of the 4-port GE NIC
Item Index
Dimensions l Length: 5.33 inches
l Width: 2.71 inches
Typical powerconsumption
4.3W
Operating temperature 0°C to 55°C (32°F to 131°F)
Storage temperature -40°C to +70°C (-40°F to +158°F)
Storage humidity 90% RH (35°C, non-condensing)
2.10 8Gb FC HBAThis section describes the features, panels, and technical specifications of the 8Gb FC HBA.
2 Product ComponentsNetBackup 5200
Product Description
2-14 Symantec Corporation Issue 02 (2011-03-28)
The model of the 8Gb FC HBA is QLE2562.
The 8GB FC HBAs in slots 1 and 2 provide six 8Gb FC ports for backup or tape out.
NOTE
The 8GB FC HBA in slot 3 can provide two tape out FC ports, by using the tape out card (Fibre Channel),data can be exported from the NetBackup 5200 to a tape library for offline storage.
Appearance
Figure 2-12 shows the 8Gb FC HBA.
Figure 2-12 8Gb FC HBA
Table 2-10 lists the indicators on the 8Gb FC HBA.
Table 2-10 Description of indicators on the 8Gb FC HBA
8/Yellow 4/Green 2/Amber Description
Off Off Off Power off.
Off Off On/Blinking Data is being transferred at a rate of 2 Gbit/s.
Off On/Blinking Off Data is being transferred at a rate of 4 Gbit/s.
On/Blinking Off Off Data is being transferred at a rate of 8 Gbit/s.
On On On Power on (before firmware initialization).
Blinking Blinking Blinking Power on (after firmware initialization).
Blinking alternately Firmware error.
Table 2-11 lists the description of the ports on the 8Gb FC HBA.
NetBackup 5200Product Description 2 Product Components
Issue 02 (2011-03-28) Symantec Corporation 2-15
Table 2-11 Description of ports on 8Gb FC HBA
Property Value
Connectors Dual 8Gbps Fibre Channel
Port cables SFP+ with LC-style connector
Technical SpecificationTable 2-12 lists the technical specifications of the 8Gb FC HBA.
Table 2-12 Technical specifications of the 8Gb FC HBA
Item Index
Dimensions l Length: 6.6 inches
l Width: 2.54 inches
Typical powerconsumption
Typical power: 6.2 W
Operating temperature 0°C to 55°C (32°F to 131°F)
Storage temperature -40°C to +70°C (-40°F to +158°F)
Storage humidity l 10% RH to 90% RH (operating, non-condensing)
l 5% RH to 93% RH (non-operating, non-condensing)
2 Product ComponentsNetBackup 5200
Product Description
2-16 Symantec Corporation Issue 02 (2011-03-28)
3 Device Cable
About This Chapter
This chapter describes the structure, cable connection list, and technical specifications of theexternal cables used in the NetBackup 5200.
3.1 Power Cable and Grounding CableThis section describes the structure, cable connection list, and technical specifications of thepower cables and grounding cables used in the NetBackup 5200.
3.2 Signal CableThis section describes the structure, cable connection list, and technical specifications of theexternal signal cables used in the NetBackup 5200.
NetBackup 5200Product Description 3 Device Cable
Issue 02 (2011-03-28) Symantec Corporation 3-1
3.1 Power Cable and Grounding CableThis section describes the structure, cable connection list, and technical specifications of thepower cables and grounding cables used in the NetBackup 5200.
3.1.1 Power CableThis section describes the structure, cable connection list, and technical specifications of thepower cable.
3.1.2 Grounding CableThis section describes the structure, cable connection list, and technical specifications of thegrounding cable.
3.1.1 Power CableThis section describes the structure, cable connection list, and technical specifications of thepower cable.
Each AC power module of the NetBackup 5200 is configured with one AC power cable. Oneend of the AC power cable is connected to the power socket of the NetBackup 5200, and theother end is connected to the external power supply to provide power for the NetBackup 5200.
NOTE
Power cables are subject to different regions. International standard cables are used as an example in thisdocument
StructureFigure 3-1 shows the structure of the AC power cable.
3 Device CableNetBackup 5200
Product Description
3-2 Symantec Corporation Issue 02 (2011-03-28)
Figure 3-1 Structure of the AC power cable
3000
4
14
23
15.8
120° 120°7.9
10.3E
L N
EN L
Main Label (M)
A
A B
B
X1 X2 18
21
1 2
W
1 AC power connector compliant with the international standard
2 AC power connector compliant with the international standard
A power cable includes live line, neutral line, and grounding line, respectively as shown in L,N, and E in directions A and B in Figure 3-1.
Cable Connection List
Table 3-1 lists the cable connection list of the power cable.
Table 3-1 Cable connection list of the power cable
Start End Color
X1.L X2.L Brown
X1.N X2.N Blue
X1.E X2.E Yellow/Green
NetBackup 5200Product Description 3 Device Cable
Issue 02 (2011-03-28) Symantec Corporation 3-3
Technical Specifications
Table 3-2 lists the technical specifications of the power cable.
Table 3-2 Technical specifications of the power cable
Item Description
Terminal X1/X2 AC power connector compliant with national standard-3PIN-10A-250 V
Cable type 227IEC53 (RVV)-3 x 1 mm2-Black
3.1.2 Grounding CableThis section describes the structure, cable connection list, and technical specifications of thegrounding cable.
The NetBackup 5200 is configured with one grounding cable. One end of the cable connects tothe grounding clip of the NetBackup 5200, and the other end connects to the grounding terminalof the NetBackup 5200 cabinet to ensure the safe operation of the NetBackup 5200.
Structure
Figure 3-2 shows the structure of the grounding cable.
Figure 3-2 Structure of the grounding cable
1 Bare connector-OT type
Technical Specifications
Table 3-3 lists the technical specifications of the grounding cable.
Table 3-3 Technical specifications of the grounding cable
Item Description
Terminal X1/X2 Bare connector-OT-6 mm2-M6-Tin plated-Round insulated terminal-12to 10 AWG-Yellow
Cable type Power cable-450/750V-H07Z-K-6 mm2-Yellow green
3 Device CableNetBackup 5200
Product Description
3-4 Symantec Corporation Issue 02 (2011-03-28)
Item Description
Cable length 0.5 m
3.2 Signal CableThis section describes the structure, cable connection list, and technical specifications of theexternal signal cables used in the NetBackup 5200.
3.2.1 Network CableThis section describes the structure, cable connection list, and technical specifications of thenetwork cable.
3.2.2 Multi-Mode FiberThis section describes the structure and technical specifications of the multi-mode fiber.
3.2.3 Serial CableThis section describes the structure, cable connection list, and technical specifications of theserial cable.
3.2.1 Network CableThis section describes the structure, cable connection list, and technical specifications of thenetwork cable.
The NetBackup 5200 communicates with the outside through a network cable. One end of thenetwork cable connects to the management network port or service network port of theNetBackup 5200, and the other end connects to the network switch or the AS. Both ends of thecable are RJ-45 connectors.
StructureFigure 3-3 shows the structure of the network cable.
Figure 3-3 Structure of the network cable
1 RJ-45 connector
Cable Connection ListTable 3-4shows the cable connection list of the network cable.
NetBackup 5200Product Description 3 Device Cable
Issue 02 (2011-03-28) Symantec Corporation 3-5
Table 3-4 Cable connection list of the network cable
Connector X1 Connector X2 Color Mapping
X1.2 X2.2 OrangeOne twisted pair
X1.1 X2.1 White/Orange
X1.6 X2.6 GreenOne twisted pair
X1.3 X2.3 White/Green
X1.4 X2.4 BlueOne twisted pair
X1.5 X2.5 White/Blue
X1.8 X2.8 BrownOne twisted pair
X1.7 X2.7 White/Brown
Technical Specifications
Table 3-5 lists the technical specifications of the network cable.
Table 3-5 Technical specifications of the network cable
Item Description
Connector X1/X2 Network port connector-8PIN-8 bit-Shielded-RJ-45 connector
Cable type Communication cable-Category 5 Shielded twisted pair-24 AWG
Number of cores 8
Core radius 0.53 mm
3.2.2 Multi-Mode FiberThis section describes the structure and technical specifications of the multi-mode fiber.
The NetBackup 5200 communicates with the FC switch through a multi-mode fiber. One endof the multi-mode fiber connects to the 10GE service network port or FC port , and the otherend connects to the FC switch or the tape library. The two ends of the multi-mode fiber are LCconnectors.
NOTE
Fibers are not delivered with goods. They need to be prepared by customers themselves.
Structure
Figure 3-4 shows the structure of the multi-mode fiber.
3 Device CableNetBackup 5200
Product Description
3-6 Symantec Corporation Issue 02 (2011-03-28)
Figure 3-4 Structure of the multi-mode fiber
Technical SpecificationsTable 3-6 lists the system technical specifications of the multi-mode fiber.
Table 3-6 Technical specifications of the multi-mode fiber
Item Description
Laser wavelength 850 nanometer (not visible)
Cable type to use Multi-mode fiber with 62.5µm or 50µm core diameter
Connector type LC
Maximum cable length 300 meters
3.2.3 Serial CableThis section describes the structure, cable connection list, and technical specifications of theserial cable.
The NetBackup 5200 communicates with the maintenance terminal through a serial cable.
StructureFigure 3-5 shows the structure of the serial cable.
Figure 3-5 Structure of the serial cableVIEW A 1 2
W
M016 M059
Pos.9
A
Pos.1Pos.8Pos.1
3mX1 X2
A
B
B
Main Label VIEW B
1 Cable connector 2 Network port connector
The network port connector end of the serial cable connects to the system serial port of theNetBackup 5200, and the cable connector end connects to the system serial port of themaintenance terminal.
NetBackup 5200Product Description 3 Device Cable
Issue 02 (2011-03-28) Symantec Corporation 3-7
Cable Connection ListTable 3-7 lists the cable connection list of the serial cable.
Table 3-7 Cable connection list of the serial cable
Connector X1 Connector X2
X1.2 X2.3
X1.3 X2.6
X1.5 X2.5
Technical SpecificationsTable 3-8 lists the technical specifications of the serial cable.
Table 3-8 Technical specifications of the serial cable
Item Description
Connector X1 Cable connector-D type-9PIN-Female-Welding type
Connector X2 Network port connector-Single row-Single port-8PIN-8bit-Shielded-Connector-AWG26-28AWG-Inner conductor stranded cable
Cable type Symmetric twisted pair-UL2464-0.32 mm-28 AWG-2 pairs-PantoneWARM GRAY 1 U
Number ofcores
8
Cable length 3 m
3 Device CableNetBackup 5200
Product Description
3-8 Symantec Corporation Issue 02 (2011-03-28)
A Abbreviations and Acronyms
This section describes acronyms and abbreviations referred to in this document.
A
AC Alternating Current
B
BBU Battery Backup Unit
BIOS Basic Input/Output System
BMC Baseboard Management Controller
C
CCC China Compulsory Certification
CE Conformite Europeenne
CPU Central Processing Unit
D
DC Direct Current
DDR3 3rd Generation Double Data Rate SDRAM
DHCP Dynamic Host Configuration Protocol
DIMM Dual Inline Memory Module
F
FC Fiber Channel
FCC Federal Communications Commission
NetBackup 5200Product Description A Abbreviations and Acronyms
Issue 02 (2011-03-28) Symantec Corporation A-1
G
GE Gigabit Ethernet
H
HBA Host Bus Adapter
I
IIC Inter-Integrated Circuit
IOAT Input/Output Acceleration Technology
IPMI Intelligent Platform Management Interface
K
KVM Keyboard Video Mouse
L
LC Lucent Connector
M
MTBF Mean Time Between Failures
MTTR Mean Time To Repair
N
NIC Network Interface Card
P
PCI-E Peripheral Component Interconnect Express
R
RAID Redundant Array of Independent Disks
REACH Registration, Evaluation, Authorization and Restriction ofChemicals
RoHS Restriction of the Use of Certain Hazardous Substances
A Abbreviations and AcronymsNetBackup 5200
Product Description
A-2 Symantec Corporation Issue 02 (2011-03-28)
S
SAS Serial Attached SCSI
SATA Serial Advanced Technology Attachment
SNMP Simple Network Management Protocol
T
TOC Total Cost of Ownership
U
UL Underwriters Laboratories
USB Universal Serial Bus
V
VGA Video Graphics Array
NetBackup 5200Product Description A Abbreviations and Acronyms
Issue 02 (2011-03-28) Symantec Corporation A-3