PRODUCT DATASHEET - MakeShopHigh quality e Weight 4,3 Delivery format Single Dimensions 27...
Transcript of PRODUCT DATASHEET - MakeShopHigh quality e Weight 4,3 Delivery format Single Dimensions 27...
PRODUCT DATASHEETConfidex
On
metal asset tracking applications.
Device type
Air interface protocol
Operational frequency
IC type
Memory configuration
EPC memory content
Read range
Applicable surface materials
* Read ranges are theoretical
environment, in where antennas with optimum directivity are used with
maximum allowed operating power according to ETSI EN 302 208 (2W
ERP).
measured
1/
PRODUCT DATASHEETConfidex
On-metal tag with square inch foot print for various
metal asset tracking applications.
ELECTRICAL SPECIFICATION
Device type
Class 1
Air interface protocol
EPCGlobal Class1 Gen2 ISO 18000
Operational frequency
Global
EU 865
US 902
IC type
Global:
Impinj Monza
Impinj Monza
EU &
Alien Higgs
Memory configuration
With Monza
With Monza
With Higgs 3:
EPC memory content
Unique
Read range
Global version:
EU up to 5 m / 16 ft
US up to 4 m / 13 ft
EU version up to 7 m / 23 ft
US version up to 6,5 m / 21 ft
Applicable surface materials
Works on any material
* Read ranges are theoretical
environment, in where antennas with optimum directivity are used with
maximum allowed operating power according to ETSI EN 302 208 (2W
ERP).
measured
/2
PRODUCT DATASHEETConfidex
metal tag with square inch foot print for various
metal asset tracking applications.
ELECTRICAL SPECIFICATION
Device type
Class 1
Air interface protocol
EPCGlobal Class1 Gen2 ISO 18000
Operational frequency
Global
EU 865
US 902
IC type
Global:
Impinj Monza
Impinj Monza
EU & US:
Alien Higgs
Memory configuration
With Monza
With Monza
With Higgs 3:
EPC memory content
Unique
Read range
Global version:
EU up to 5 m / 16 ft
US up to 4 m / 13 ft
EU version up to 7 m / 23 ft
US version up to 6,5 m / 21 ft
Applicable surface materials
Works on any material
* Read ranges are theoretical
environment, in where antennas with optimum directivity are used with
maximum allowed operating power according to ETSI EN 302 208 (2W
EU = 865
measured
PRODUCT DATASHEETConfidex
metal tag with square inch foot print for various
metal asset tracking applications.
ELECTRICAL SPECIFICATION
Device type
Class 1 Generation 2 passive UHF RFID transponder
Air interface protocol
EPCGlobal Class1 Gen2 ISO 18000
Operational frequency
Global 865
EU 865-869 MHz
US 902-928 MHz
Global:
Impinj Monza
Impinj Monza
US:
Alien Higgs
Memory configuration
With Monza
With Monza
With Higgs 3:
EPC memory content
Unique number encoded as a default
Read range
Global version:
EU up to 5 m / 16 ft
US up to 4 m / 13 ft
EU version up to 7 m / 23 ft
US version up to 6,5 m / 21 ft
Applicable surface materials
Works on any material
* Read ranges are theoretical
environment, in where antennas with optimum directivity are used with
maximum allowed operating power according to ETSI EN 302 208 (2W
EU = 865
measured on metal.
PRODUCT DATASHEETConfidex
metal tag with square inch foot print for various
metal asset tracking applications.
ELECTRICAL SPECIFICATION
Device type
Generation 2 passive UHF RFID transponder
Air interface protocol
EPCGlobal Class1 Gen2 ISO 18000
Operational frequency
865-928MHz
869 MHz
928 MHz
Impinj Monza
Impinj Monza
Alien Higgs
Memory configuration
With Monza 4QT: EPC
With Monza 4E: EPC
With Higgs 3:
EPC memory content
number encoded as a default
Read range (2W ERP)
Global version:
EU up to 5 m / 16 ft
US up to 4 m / 13 ft
EU version up to 7 m / 23 ft
US version up to 6,5 m / 21 ft
Applicable surface materials
Works on any material
* Read ranges are theoretical
environment, in where antennas with optimum directivity are used with
maximum allowed operating power according to ETSI EN 302 208 (2W
EU = 865 -
on metal.
PRODUCT DATASHEETConfidex Ironside Micro
metal tag with square inch foot print for various
metal asset tracking applications.
ELECTRICAL SPECIFICATION
Generation 2 passive UHF RFID transponder
Air interface protocol
EPCGlobal Class1 Gen2 ISO 18000
Operational frequency
928MHz
869 MHz
928 MHz
Impinj Monza
Impinj Monza
Alien Higgs 3
TM
Memory configuration
4QT: EPC
4E: EPC
With Higgs 3: EPC 96
EPC memory content
number encoded as a default
(2W ERP)
Global version:
EU up to 5 m / 16 ft
US up to 4 m / 13 ft
EU version up to 7 m / 23 ft
US version up to 6,5 m / 21 ft
Applicable surface materials
Works on any material
* Read ranges are theoretical
environment, in where antennas with optimum directivity are used with
maximum allowed operating power according to ETSI EN 302 208 (2W
868 MHz, US = 902
on metal.
PRODUCT DATASHEETIronside Micro
metal tag with square inch foot print for various
metal asset tracking applications.
ELECTRICAL SPECIFICATION
Generation 2 passive UHF RFID transponder
Air interface protocol
EPCGlobal Class1 Gen2 ISO 18000
Operational frequency
928MHz
869 MHz
928 MHz
4QT
4ETM
TM (upon special request)
Memory configuration
4QT: EPC
4E: EPC
EPC 96
EPC memory content
number encoded as a default
(2W ERP)
EU up to 5 m / 16 ft
US up to 4 m / 13 ft
EU version up to 7 m / 23 ft
US version up to 6,5 m / 21 ft
Applicable surface materials
Works on any material
* Read ranges are theoretical
environment, in where antennas with optimum directivity are used with
maximum allowed operating power according to ETSI EN 302 208 (2W
868 MHz, US = 902
PRODUCT DATASHEETIronside Micro
metal tag with square inch foot print for various
metal asset tracking applications.
ELECTRICAL SPECIFICATION
Generation 2 passive UHF RFID transponder
Air interface protocol
EPCGlobal Class1 Gen2 ISO 18000
Operational frequency
928MHz
QTTM
TM
(upon special request)
(upon special request)
Memory configuration
4QT: EPC 128 bi
4E: EPC 496 b
EPC 96-496
EPC memory content
number encoded as a default
(2W ERP)*
EU up to 5 m / 16 ft
US up to 4 m / 13 ft
EU version up to 7 m / 23 ft
US version up to 6,5 m / 21 ft
Applicable surface materials
Works on any material
* Read ranges are theoretical values that are calculated for non
environment, in where antennas with optimum directivity are used with
maximum allowed operating power according to ETSI EN 302 208 (2W
868 MHz, US = 902
PRODUCT DATASHEETIronside Micro
metal tag with square inch foot print for various
metal asset tracking applications.
ELECTRICAL SPECIFICATION
Generation 2 passive UHF RFID transponder
EPCGlobal Class1 Gen2 ISO 18000
(upon special request)
(upon special request)
128 bi
496 b
496 b
number encoded as a default
EU version up to 7 m / 23 ft
US version up to 6,5 m / 21 ft
Applicable surface materials
values that are calculated for non
environment, in where antennas with optimum directivity are used with
maximum allowed operating power according to ETSI EN 302 208 (2W
868 MHz, US = 902
PRODUCT DATASHEETIronside Micro
metal tag with square inch foot print for various
metal asset tracking applications.
ELECTRICAL SPECIFICATION
Generation 2 passive UHF RFID transponder
EPCGlobal Class1 Gen2 ISO 18000
(upon special request)
(upon special request)
128 bit; User 512 bit; TID 96
496 bit; User 128 bit; TID 96
bit; User
number encoded as a default
EU version up to 7 m / 23 ft
US version up to 6,5 m / 21 ft
Applicable surface materials*
values that are calculated for non
environment, in where antennas with optimum directivity are used with
maximum allowed operating power according to ETSI EN 302 208 (2W
868 MHz, US = 902
PRODUCT DATASHEETIronside Micro
metal tag with square inch foot print for various
metal asset tracking applications.
ELECTRICAL SPECIFICATION
Generation 2 passive UHF RFID transponder
EPCGlobal Class1 Gen2 ISO 18000
(upon special request)
(upon special request)
t; User 512 bit; TID 96
it; User 128 bit; TID 96
it; User
number encoded as a default
values that are calculated for non
environment, in where antennas with optimum directivity are used with
maximum allowed operating power according to ETSI EN 302 208 (2W
868 MHz, US = 902 - 928 MHz.
PRODUCT DATASHEETIronside Micro
metal tag with square inch foot print for various
metal asset tracking applications.
Generation 2 passive UHF RFID transponder
EPCGlobal Class1 Gen2 ISO 18000-6C
(upon special request)
(upon special request)
t; User 512 bit; TID 96
it; User 128 bit; TID 96
it; User 64
number encoded as a default
values that are calculated for non
environment, in where antennas with optimum directivity are used with
maximum allowed operating power according to ETSI EN 302 208 (2W
928 MHz.
PRODUCT DATASHEETIronside Micro™
metal tag with square inch foot print for various
Generation 2 passive UHF RFID transponder
6C
(upon special request)
(upon special request)
t; User 512 bit; TID 96
it; User 128 bit; TID 96
64-512
number encoded as a default
values that are calculated for non
environment, in where antennas with optimum directivity are used with
maximum allowed operating power according to ETSI EN 302 208 (2W
928 MHz.
PRODUCT DATASHEET™
metal tag with square inch foot print for various
Generation 2 passive UHF RFID transponder
(upon special request)
(upon special request)
t; User 512 bit; TID 96
it; User 128 bit; TID 96
512 bit; TID
values that are calculated for non
environment, in where antennas with optimum directivity are used with
maximum allowed operating power according to ETSI EN 302 208 (2W
928 MHz. Informed values are
PRODUCT DATASHEET
metal tag with square inch foot print for various
Generation 2 passive UHF RFID transponder
(upon special request)
t; User 512 bit; TID 96
it; User 128 bit; TID 96
bit; TID
values that are calculated for non
environment, in where antennas with optimum directivity are used with
maximum allowed operating power according to ETSI EN 302 208 (2W
Informed values are
metal tag with square inch foot print for various
Generation 2 passive UHF RFID transponder
t; User 512 bit; TID 96
it; User 128 bit; TID 96 bit
bit; TID
values that are calculated for non
environment, in where antennas with optimum directivity are used with
maximum allowed operating power according to ETSI EN 302 208 (2W
Informed values are
metal tag with square inch foot print for various
Generation 2 passive UHF RFID transponder
t; User 512 bit; TID 96 bit
bit
bit; TID 96
values that are calculated for non-reflective
environment, in where antennas with optimum directivity are used with
maximum allowed operating power according to ETSI EN 302 208 (2W
Informed values are
© Confidex 2013
metal tag with square inch foot print for various
bit
bit
reflective
environment, in where antennas with optimum directivity are used with
maximum allowed operating power according to ETSI EN 302 208 (2W
Informed values are
© Confidex 2013
01
metal tag with square inch foot print for various
reflective
environment, in where antennas with optimum directivity are used with
maximum allowed operating power according to ETSI EN 302 208 (2W
Informed values are
© Confidex 2013
01-2013
© Confidex 2013
2013
[email protected] www.confidex.com
© Confidex 2013
2013
www.confidex.com
RADIATION PATTERNS
On metal
MECHANICAL SPECIFICATION
Tag materials
High quality e
Weight
4,3
Delivery format
Single
Dimensions
27
ENVIRONMENTAL
Operating temperature
-35°C to +85°C /
Ambient temperature
-35°C to +85°C /
IP classification
IP6
Chemical resistance
No physical or performance changes in:
Expected lifetime
Years in normal operating conditions
Values in
environmental conditions depends on the combination of all influencing
factors,
final suitability for certain environmental condition
be tested.
250
260
270
280
290
© Confidex 2013
www.confidex.com
RADIATION PATTERNS
On metal
MECHANICAL SPECIFICATION
Tag materials
High quality e
Weight
4,3 g
Delivery format
Single
Dimensions
27 x
ENVIRONMENTAL
Operating temperature
35°C to +85°C /
Ambient temperature
35°C to +85°C /
IP classification
IP68
Chemical resistance
No physical or performance changes in:
Global version:
- 168h Motor oil
- 168h
- 5h
- 1h NaOH (10%, pH 13)
- Acetone,
EU & US versions:
- 168h Motor oil
- 1h
- 1h
- 1h NaOH (10%, pH 13)
- Acetone,
Expected lifetime
Years in normal operating conditions
Values in
environmental conditions depends on the combination of all influencing
factors,
final suitability for certain environmental condition
be tested.
220
230
240
250
260
270
280
290
300
310
320
www.confidex.com
RADIATION PATTERNS
On metal
MECHANICAL SPECIFICATION
Tag materials
High quality e
Weight
g
Delivery format
Single, 500pcs in box
Dimensions
x 27 x
ENVIRONMENTAL
Operating temperature
35°C to +85°C /
Ambient temperature
35°C to +85°C /
IP classification
Chemical resistance
No physical or performance changes in:
Global version:
168h Motor oil
168h
5h Sulfuri
1h NaOH (10%, pH 13)
Acetone,
EU & US versions:
168h Motor oil
1h Salt wat
1h Sulfuri
1h NaOH (10%, pH 13)
Acetone,
Expected lifetime
Years in normal operating conditions
Values in the table are the best recommendations; resistance against
environmental conditions depends on the combination of all influencing
factors, exposure duration and chemical concentrations. Thus, product’s
final suitability for certain environmental condition
be tested. Contact Confidex for more specific information.
210
220
320
330
www.confidex.com
RADIATION PATTERNS
On metal
MECHANICAL SPECIFICATION
Tag materials
High quality e
Delivery format
, 500pcs in box
Dimensions
x 5,5
ENVIRONMENTAL
Operating temperature
35°C to +85°C /
Ambient temperature
35°C to +85°C /
IP classification
Chemical resistance
No physical or performance changes in:
Global version:
168h Motor oil
168h Salt wat
Sulfuri
1h NaOH (10%, pH 13)
Acetone,
EU & US versions:
168h Motor oil
Salt wat
Sulfuri
1h NaOH (10%, pH 13)
Acetone,
Expected lifetime
Years in normal operating conditions
the table are the best recommendations; resistance against
environmental conditions depends on the combination of all influencing
exposure duration and chemical concentrations. Thus, product’s
final suitability for certain environmental condition
Contact Confidex for more specific information.
190200
340350
www.confidex.com
RADIATION PATTERNS
MECHANICAL SPECIFICATION
Tag materials
High quality engineering plastics
Delivery format
, 500pcs in box
,5 mm
ENVIRONMENTAL
Operating temperature
35°C to +85°C /
Ambient temperature
35°C to +85°C /
IP classification
Chemical resistance
No physical or performance changes in:
Global version:
168h Motor oil
Salt wat
Sulfuric acid (10%, pH 2)
1h NaOH (10%, pH 13)
Acetone, contact should be avoided
EU & US versions:
168h Motor oil
Salt wat
Sulfuric acid
1h NaOH (10%, pH 13)
Acetone, contact should be avoided
Expected lifetime
Years in normal operating conditions
the table are the best recommendations; resistance against
environmental conditions depends on the combination of all influencing
exposure duration and chemical concentrations. Thus, product’s
final suitability for certain environmental condition
Contact Confidex for more specific information.
0
20
40
60
80
100
0
180190
350
RADIATION PATTERNS
MECHANICAL SPECIFICATION
ngineering plastics
Delivery format
, 500pcs in box
mm
ENVIRONMENTAL
Operating temperature
35°C to +85°C / -31
Ambient temperature
35°C to +85°C /-31
Chemical resistance
No physical or performance changes in:
Global version:
168h Motor oil
Salt water (salinity 10%)
c acid (10%, pH 2)
1h NaOH (10%, pH 13)
contact should be avoided
EU & US versions:
168h Motor oil
Salt water (salinity 10%)
c acid
1h NaOH (10%, pH 13)
contact should be avoided
Expected lifetime
Years in normal operating conditions
the table are the best recommendations; resistance against
environmental conditions depends on the combination of all influencing
exposure duration and chemical concentrations. Thus, product’s
final suitability for certain environmental condition
Contact Confidex for more specific information.
1020
160170
RADIATION PATTERNS
MECHANICAL SPECIFICATION
ngineering plastics
, 500pcs in box
/ 1.06 x 1.06 x 0.22
ENVIRONMENTAL RESISTANCE
Operating temperature
31°F to +185°F
Ambient temperature
31°F to +185°F
Chemical resistance
No physical or performance changes in:
168h Motor oil exposure
er (salinity 10%)
c acid (10%, pH 2)
1h NaOH (10%, pH 13)
contact should be avoided
EU & US versions:
168h Motor oil exposure
er (salinity 10%)
c acid (10%, pH
1h NaOH (10%, pH 13)
contact should be avoided
Years in normal operating conditions
the table are the best recommendations; resistance against
environmental conditions depends on the combination of all influencing
exposure duration and chemical concentrations. Thus, product’s
final suitability for certain environmental condition
Contact Confidex for more specific information.
20
30
40
140
150
160
RADIATION PATTERNS
MECHANICAL SPECIFICATION
ngineering plastics
1.06 x 1.06 x 0.22
RESISTANCE
Operating temperature
°F to +185°F
°F to +185°F
No physical or performance changes in:
exposure
er (salinity 10%)
c acid (10%, pH 2)
1h NaOH (10%, pH 13)
contact should be avoided
exposure
er (salinity 10%)
(10%, pH
1h NaOH (10%, pH 13)
contact should be avoided
Years in normal operating conditions
the table are the best recommendations; resistance against
environmental conditions depends on the combination of all influencing
exposure duration and chemical concentrations. Thus, product’s
final suitability for certain environmental condition
Contact Confidex for more specific information.
40
50
60
70
110
120
130
140
RADIATION PATTERNS
MECHANICAL SPECIFICATION
ngineering plastics
1.06 x 1.06 x 0.22
RESISTANCE
°F to +185°F
°F to +185°F
No physical or performance changes in:
exposure
er (salinity 10%)
c acid (10%, pH 2)
1h NaOH (10%, pH 13) exposure
contact should be avoided
exposure
er (salinity 10%)
(10%, pH
1h NaOH (10%, pH 13) exposure
contact should be avoided
Years in normal operating conditions
the table are the best recommendations; resistance against
environmental conditions depends on the combination of all influencing
exposure duration and chemical concentrations. Thus, product’s
final suitability for certain environmental condition
Contact Confidex for more specific information.
70
80
90
100
110
120
MECHANICAL SPECIFICATION
ngineering plastics
1.06 x 1.06 x 0.22
RESISTANCE
°F to +185°F
°F to +185°F
No physical or performance changes in:
exposure
er (salinity 10%)
c acid (10%, pH 2)
exposure
contact should be avoided
exposure
er (salinity 10%)
(10%, pH 2)
exposure
contact should be avoided
Years in normal operating conditions
the table are the best recommendations; resistance against
environmental conditions depends on the combination of all influencing
exposure duration and chemical concentrations. Thus, product’s
final suitability for certain environmental condition
Contact Confidex for more specific information.
250
260
270
280
290
MECHANICAL SPECIFICATION
ngineering plastics
1.06 x 1.06 x 0.22
RESISTANCE
°F to +185°F
°F to +185°F
No physical or performance changes in:
er (salinity 10%) exposure
exposure
exposure
contact should be avoided
er (salinity 10%) exposure
2) exposure
exposure
contact should be avoided
Years in normal operating conditions
the table are the best recommendations; resistance against
environmental conditions depends on the combination of all influencing
exposure duration and chemical concentrations. Thus, product’s
final suitability for certain environmental condition
Contact Confidex for more specific information.
220
230
240
250
290
300
310
320
1.06 x 1.06 x 0.22
No physical or performance changes in:
exposure
exposure
exposure
contact should be avoided
exposure
exposure
exposure
contact should be avoided
Years in normal operating conditions
the table are the best recommendations; resistance against
environmental conditions depends on the combination of all influencing
exposure duration and chemical concentrations. Thus, product’s
final suitability for certain environmental condition
Contact Confidex for more specific information.
200
210
220
320
330
340
in
No physical or performance changes in:
exposure
exposure
contact should be avoided
exposure
exposure
contact should be avoided
the table are the best recommendations; resistance against
environmental conditions depends on the combination of all influencing
exposure duration and chemical concentrations. Thus, product’s
final suitability for certain environmental conditions is recommended to
Contact Confidex for more specific information.
100
190200
340350
exposure
the table are the best recommendations; resistance against
environmental conditions depends on the combination of all influencing
exposure duration and chemical concentrations. Thus, product’s
s is recommended to
Contact Confidex for more specific information.
0
20
40
60
80
100
0
180
the table are the best recommendations; resistance against
environmental conditions depends on the combination of all influencing
exposure duration and chemical concentrations. Thus, product’s
s is recommended to
Contact Confidex for more specific information.
1020
160170
the table are the best recommendations; resistance against
environmental conditions depends on the combination of all influencing
exposure duration and chemical concentrations. Thus, product’s
s is recommended to
30
40
140
150
160
the table are the best recommendations; resistance against
environmental conditions depends on the combination of all influencing
exposure duration and chemical concentrations. Thus, product’s
s is recommended to
40
50
60
70
80
100
110
120
130
140
the table are the best recommendations; resistance against
environmental conditions depends on the combination of all influencing
exposure duration and chemical concentrations. Thus, product’s
s is recommended to
70
80
90
100
110
the table are the best recommendations; resistance against
environmental conditions depends on the combination of all influencing
exposure duration and chemical concentrations. Thus, product’s
s is recommended to
Pre
Customized data label
Customized
Confidex Ironside Micro
fixing methods
When background adhesive is ordered the tag is delivered
with adhesive attached.
adhesive background, clean and dry the surface for
obtaining the maximum bond streng
temperature is from +21°C to +38°C (+70°F to +100°F),
bond strength can be improved with firm application
pressure and moderate heating from +38°C to +54°C
(+100°F to +130°F).
10°C (50°F) is not reco
Silicone sealants like Dow Corning AS 7096 provide very
high bond strength and resistance against mechanical
stress. When tag is attached with sealant adhesive, insert a
lay
surface. Increase the bond by adding extra sealant from
the tag holes. Inser maximum 2mm layer of adhesive
under the tag. Please refer to silicone sealant supplier for
exact fixing instructions.
Mechanical fixing is recommended to be used in every
application that includes risk for high mechanical stress or
low temperature during tag fixing.
there is no air g
tag.
2/
PERSONALIZATION OPTIONS
Pre-encoding
•
Customized data label
•
Customized
•
INSTALLATION INSTRUCTIONS
Confidex Ironside Micro
fixing methods
1.
When background adhesive is ordered the tag is delivered
with adhesive attached.
adhesive background, clean and dry the surface for
obtaining the maximum bond streng
temperature is from +21°C to +38°C (+70°F to +100°F),
bond strength can be improved with firm application
pressure and moderate heating from +38°C to +54°C
(+100°F to +130°F).
10°C (50°F) is not reco
2.
Silicone sealants like Dow Corning AS 7096 provide very
high bond strength and resistance against mechanical
stress. When tag is attached with sealant adhesive, insert a
layer of sealant under the tag and press the tag on the
surface. Increase the bond by adding extra sealant from
the tag holes. Inser maximum 2mm layer of adhesive
under the tag. Please refer to silicone sealant supplier for
exact fixing instructions.
3.
Mechanical fixing is recommended to be used in every
application that includes risk for high mechanical stress or
low temperature during tag fixing.
there is no air g
tag.
/2
PERSONALIZATION OPTIONS
encoding
•
Customized data label
•
Customized
•
INSTALLATION INSTRUCTIONS
Confidex Ironside Micro
fixing methods
1.
When background adhesive is ordered the tag is delivered
with adhesive attached.
adhesive background, clean and dry the surface for
obtaining the maximum bond streng
temperature is from +21°C to +38°C (+70°F to +100°F),
bond strength can be improved with firm application
pressure and moderate heating from +38°C to +54°C
(+100°F to +130°F).
10°C (50°F) is not reco
2.
Silicone sealants like Dow Corning AS 7096 provide very
high bond strength and resistance against mechanical
stress. When tag is attached with sealant adhesive, insert a
er of sealant under the tag and press the tag on the
surface. Increase the bond by adding extra sealant from
the tag holes. Inser maximum 2mm layer of adhesive
under the tag. Please refer to silicone sealant supplier for
exact fixing instructions.
3.
Mechanical fixing is recommended to be used in every
application that includes risk for high mechanical stress or
low temperature during tag fixing.
there is no air g
PERSONALIZATION OPTIONS
encoding
Customer specific encoding of EPC or user
memory. Locking
Customized data label
Customer specific layout
numbers, barcodes etc.
Customized
Customer specific layout including logo, text,
numbers, barcodes etc.
INSTALLATION INSTRUCTIONS
Confidex Ironside Micro
fixing methods
3M 300LSE h
(not included by default)
When background adhesive is ordered the tag is delivered
with adhesive attached.
adhesive background, clean and dry the surface for
obtaining the maximum bond streng
temperature is from +21°C to +38°C (+70°F to +100°F),
bond strength can be improved with firm application
pressure and moderate heating from +38°C to +54°C
(+100°F to +130°F).
10°C (50°F) is not reco
Other adhesive fixings
•
•
•
Silicone sealants like Dow Corning AS 7096 provide very
high bond strength and resistance against mechanical
stress. When tag is attached with sealant adhesive, insert a
er of sealant under the tag and press the tag on the
surface. Increase the bond by adding extra sealant from
the tag holes. Inser maximum 2mm layer of adhesive
under the tag. Please refer to silicone sealant supplier for
exact fixing instructions.
Mechani
•
•
•
Mechanical fixing is recommended to be used in every
application that includes risk for high mechanical stress or
low temperature during tag fixing.
there is no air g
PERSONALIZATION OPTIONS
encoding
Customer specific encoding of EPC or user
memory. Locking
Customized data label
Customer specific layout
numbers, barcodes etc.
Customized laser engraving
Customer specific layout including logo, text,
numbers, barcodes etc.
INSTALLATION INSTRUCTIONS
Confidex Ironside Micro
fixing methods
3M 300LSE h
(not included by default)
When background adhesive is ordered the tag is delivered
with adhesive attached.
adhesive background, clean and dry the surface for
obtaining the maximum bond streng
temperature is from +21°C to +38°C (+70°F to +100°F),
bond strength can be improved with firm application
pressure and moderate heating from +38°C to +54°C
(+100°F to +130°F).
10°C (50°F) is not reco
Other adhesive fixings
Polyurethane adhesives
Epoxies
Silicone sealants
Silicone sealants like Dow Corning AS 7096 provide very
high bond strength and resistance against mechanical
stress. When tag is attached with sealant adhesive, insert a
er of sealant under the tag and press the tag on the
surface. Increase the bond by adding extra sealant from
the tag holes. Inser maximum 2mm layer of adhesive
under the tag. Please refer to silicone sealant supplier for
exact fixing instructions.
Mechani
Screws (size M3)
Pop rivets
Plastic rivets (size 3mm)
Mechanical fixing is recommended to be used in every
application that includes risk for high mechanical stress or
low temperature during tag fixing.
there is no air g
PERSONALIZATION OPTIONS
Customer specific encoding of EPC or user
memory. Locking
Customized data label
Customer specific layout
numbers, barcodes etc.
laser engraving
Customer specific layout including logo, text,
numbers, barcodes etc.
INSTALLATION INSTRUCTIONS
Confidex Ironside Micro
fixing methods:
3M 300LSE h
(not included by default)
When background adhesive is ordered the tag is delivered
with adhesive attached.
adhesive background, clean and dry the surface for
obtaining the maximum bond streng
temperature is from +21°C to +38°C (+70°F to +100°F),
bond strength can be improved with firm application
pressure and moderate heating from +38°C to +54°C
(+100°F to +130°F).
10°C (50°F) is not reco
Other adhesive fixings
Polyurethane adhesives
Epoxies
Silicone sealants
Silicone sealants like Dow Corning AS 7096 provide very
high bond strength and resistance against mechanical
stress. When tag is attached with sealant adhesive, insert a
er of sealant under the tag and press the tag on the
surface. Increase the bond by adding extra sealant from
the tag holes. Inser maximum 2mm layer of adhesive
under the tag. Please refer to silicone sealant supplier for
exact fixing instructions.
Mechanical fixing
Screws (size M3)
Pop rivets
Plastic rivets (size 3mm)
Mechanical fixing is recommended to be used in every
application that includes risk for high mechanical stress or
low temperature during tag fixing.
there is no air gap left in between the metal surface and
PERSONALIZATION OPTIONS
Customer specific encoding of EPC or user
memory. Locking
Customized data label
Customer specific layout
numbers, barcodes etc.
laser engraving
Customer specific layout including logo, text,
numbers, barcodes etc.
INSTALLATION INSTRUCTIONS
Confidex Ironside Micro
3M 300LSE h
(not included by default)
When background adhesive is ordered the tag is delivered
with adhesive attached.
adhesive background, clean and dry the surface for
obtaining the maximum bond streng
temperature is from +21°C to +38°C (+70°F to +100°F),
bond strength can be improved with firm application
pressure and moderate heating from +38°C to +54°C
(+100°F to +130°F).
10°C (50°F) is not reco
Other adhesive fixings
Polyurethane adhesives
Epoxies
Silicone sealants
Silicone sealants like Dow Corning AS 7096 provide very
high bond strength and resistance against mechanical
stress. When tag is attached with sealant adhesive, insert a
er of sealant under the tag and press the tag on the
surface. Increase the bond by adding extra sealant from
the tag holes. Inser maximum 2mm layer of adhesive
under the tag. Please refer to silicone sealant supplier for
exact fixing instructions.
cal fixing
Screws (size M3)
Pop rivets
Plastic rivets (size 3mm)
Mechanical fixing is recommended to be used in every
application that includes risk for high mechanical stress or
low temperature during tag fixing.
ap left in between the metal surface and
PERSONALIZATION OPTIONS
Customer specific encoding of EPC or user
memory. Locking
Customized data label
Customer specific layout
numbers, barcodes etc.
laser engraving
Customer specific layout including logo, text,
numbers, barcodes etc.
INSTALLATION INSTRUCTIONS
Confidex Ironside Micro
3M 300LSE high performance acrylic adhesive
(not included by default)
When background adhesive is ordered the tag is delivered
with adhesive attached.
adhesive background, clean and dry the surface for
obtaining the maximum bond streng
temperature is from +21°C to +38°C (+70°F to +100°F),
bond strength can be improved with firm application
pressure and moderate heating from +38°C to +54°C
(+100°F to +130°F). Installation at temperatures below
10°C (50°F) is not recommended.
Other adhesive fixings
Polyurethane adhesives
Silicone sealants
Silicone sealants like Dow Corning AS 7096 provide very
high bond strength and resistance against mechanical
stress. When tag is attached with sealant adhesive, insert a
er of sealant under the tag and press the tag on the
surface. Increase the bond by adding extra sealant from
the tag holes. Inser maximum 2mm layer of adhesive
under the tag. Please refer to silicone sealant supplier for
exact fixing instructions.
cal fixing
Screws (size M3)
Pop rivets
Plastic rivets (size 3mm)
Mechanical fixing is recommended to be used in every
application that includes risk for high mechanical stress or
low temperature during tag fixing.
ap left in between the metal surface and
PERSONALIZATION OPTIONS
Customer specific encoding of EPC or user
memory. Locking permanently or with password
Customer specific layout
numbers, barcodes etc.
laser engraving
Customer specific layout including logo, text,
numbers, barcodes etc.
INSTALLATION INSTRUCTIONS
Confidex Ironside MicroTM
igh performance acrylic adhesive
(not included by default)
When background adhesive is ordered the tag is delivered
with adhesive attached. When mounting the tag with its
adhesive background, clean and dry the surface for
obtaining the maximum bond streng
temperature is from +21°C to +38°C (+70°F to +100°F),
bond strength can be improved with firm application
pressure and moderate heating from +38°C to +54°C
Installation at temperatures below
mmended.
Other adhesive fixings
Polyurethane adhesives
Silicone sealants
Silicone sealants like Dow Corning AS 7096 provide very
high bond strength and resistance against mechanical
stress. When tag is attached with sealant adhesive, insert a
er of sealant under the tag and press the tag on the
surface. Increase the bond by adding extra sealant from
the tag holes. Inser maximum 2mm layer of adhesive
under the tag. Please refer to silicone sealant supplier for
cal fixing
Screws (size M3)
Plastic rivets (size 3mm)
Mechanical fixing is recommended to be used in every
application that includes risk for high mechanical stress or
low temperature during tag fixing.
ap left in between the metal surface and
PERSONALIZATION OPTIONS
Customer specific encoding of EPC or user
permanently or with password
Customer specific layout
numbers, barcodes etc.
laser engraving
Customer specific layout including logo, text,
numbers, barcodes etc.
INSTALLATION INSTRUCTIONS
can be attached with
igh performance acrylic adhesive
(not included by default)
When background adhesive is ordered the tag is delivered
When mounting the tag with its
adhesive background, clean and dry the surface for
obtaining the maximum bond streng
temperature is from +21°C to +38°C (+70°F to +100°F),
bond strength can be improved with firm application
pressure and moderate heating from +38°C to +54°C
Installation at temperatures below
mmended.
Other adhesive fixings
Polyurethane adhesives
Silicone sealants
Silicone sealants like Dow Corning AS 7096 provide very
high bond strength and resistance against mechanical
stress. When tag is attached with sealant adhesive, insert a
er of sealant under the tag and press the tag on the
surface. Increase the bond by adding extra sealant from
the tag holes. Inser maximum 2mm layer of adhesive
under the tag. Please refer to silicone sealant supplier for
Screws (size M3)
Plastic rivets (size 3mm)
Mechanical fixing is recommended to be used in every
application that includes risk for high mechanical stress or
low temperature during tag fixing.
ap left in between the metal surface and
PERSONALIZATION OPTIONS
Customer specific encoding of EPC or user
permanently or with password
Customer specific layout including logo, text,
numbers, barcodes etc.
Customer specific layout including logo, text,
numbers, barcodes etc.
INSTALLATION INSTRUCTIONS
can be attached with
igh performance acrylic adhesive
(not included by default)
When background adhesive is ordered the tag is delivered
When mounting the tag with its
adhesive background, clean and dry the surface for
obtaining the maximum bond streng
temperature is from +21°C to +38°C (+70°F to +100°F),
bond strength can be improved with firm application
pressure and moderate heating from +38°C to +54°C
Installation at temperatures below
mmended.
Other adhesive fixings
Polyurethane adhesives
Silicone sealants like Dow Corning AS 7096 provide very
high bond strength and resistance against mechanical
stress. When tag is attached with sealant adhesive, insert a
er of sealant under the tag and press the tag on the
surface. Increase the bond by adding extra sealant from
the tag holes. Inser maximum 2mm layer of adhesive
under the tag. Please refer to silicone sealant supplier for
Plastic rivets (size 3mm)
Mechanical fixing is recommended to be used in every
application that includes risk for high mechanical stress or
low temperature during tag fixing.
ap left in between the metal surface and
Customer specific encoding of EPC or user
permanently or with password
including logo, text,
Customer specific layout including logo, text,
INSTALLATION INSTRUCTIONS
can be attached with
igh performance acrylic adhesive
When background adhesive is ordered the tag is delivered
When mounting the tag with its
adhesive background, clean and dry the surface for
obtaining the maximum bond streng
temperature is from +21°C to +38°C (+70°F to +100°F),
bond strength can be improved with firm application
pressure and moderate heating from +38°C to +54°C
Installation at temperatures below
Polyurethane adhesives
Silicone sealants like Dow Corning AS 7096 provide very
high bond strength and resistance against mechanical
stress. When tag is attached with sealant adhesive, insert a
er of sealant under the tag and press the tag on the
surface. Increase the bond by adding extra sealant from
the tag holes. Inser maximum 2mm layer of adhesive
under the tag. Please refer to silicone sealant supplier for
Plastic rivets (size 3mm)
Mechanical fixing is recommended to be used in every
application that includes risk for high mechanical stress or
low temperature during tag fixing. During fixing make sure
ap left in between the metal surface and
Customer specific encoding of EPC or user
permanently or with password
including logo, text,
Customer specific layout including logo, text,
can be attached with
igh performance acrylic adhesive
When background adhesive is ordered the tag is delivered
When mounting the tag with its
adhesive background, clean and dry the surface for
obtaining the maximum bond strength. Ideal application
temperature is from +21°C to +38°C (+70°F to +100°F),
bond strength can be improved with firm application
pressure and moderate heating from +38°C to +54°C
Installation at temperatures below
Silicone sealants like Dow Corning AS 7096 provide very
high bond strength and resistance against mechanical
stress. When tag is attached with sealant adhesive, insert a
er of sealant under the tag and press the tag on the
surface. Increase the bond by adding extra sealant from
the tag holes. Inser maximum 2mm layer of adhesive
under the tag. Please refer to silicone sealant supplier for
Mechanical fixing is recommended to be used in every
application that includes risk for high mechanical stress or
During fixing make sure
ap left in between the metal surface and
Customer specific encoding of EPC or user
permanently or with password
including logo, text,
Customer specific layout including logo, text,
can be attached with
igh performance acrylic adhesive
When background adhesive is ordered the tag is delivered
When mounting the tag with its
adhesive background, clean and dry the surface for
th. Ideal application
temperature is from +21°C to +38°C (+70°F to +100°F),
bond strength can be improved with firm application
pressure and moderate heating from +38°C to +54°C
Installation at temperatures below
Silicone sealants like Dow Corning AS 7096 provide very
high bond strength and resistance against mechanical
stress. When tag is attached with sealant adhesive, insert a
er of sealant under the tag and press the tag on the
surface. Increase the bond by adding extra sealant from
the tag holes. Inser maximum 2mm layer of adhesive
under the tag. Please refer to silicone sealant supplier for
Mechanical fixing is recommended to be used in every
application that includes risk for high mechanical stress or
During fixing make sure
ap left in between the metal surface and
Customer specific encoding of EPC or user
permanently or with password
including logo, text,
Customer specific layout including logo, text,
can be attached with
igh performance acrylic adhesive
When background adhesive is ordered the tag is delivered
When mounting the tag with its
adhesive background, clean and dry the surface for
th. Ideal application
temperature is from +21°C to +38°C (+70°F to +100°F),
bond strength can be improved with firm application
pressure and moderate heating from +38°C to +54°C
Installation at temperatures below
Silicone sealants like Dow Corning AS 7096 provide very
high bond strength and resistance against mechanical
stress. When tag is attached with sealant adhesive, insert a
er of sealant under the tag and press the tag on the
surface. Increase the bond by adding extra sealant from
the tag holes. Inser maximum 2mm layer of adhesive
under the tag. Please refer to silicone sealant supplier for
Mechanical fixing is recommended to be used in every
application that includes risk for high mechanical stress or
During fixing make sure
ap left in between the metal surface and
Customer specific encoding of EPC or user
permanently or with password
including logo, text,
Customer specific layout including logo, text,
can be attached with
igh performance acrylic adhesive
When background adhesive is ordered the tag is delivered
When mounting the tag with its
adhesive background, clean and dry the surface for
th. Ideal application
temperature is from +21°C to +38°C (+70°F to +100°F),
bond strength can be improved with firm application
pressure and moderate heating from +38°C to +54°C
Installation at temperatures below
Silicone sealants like Dow Corning AS 7096 provide very
high bond strength and resistance against mechanical
stress. When tag is attached with sealant adhesive, insert a
er of sealant under the tag and press the tag on the
surface. Increase the bond by adding extra sealant from
the tag holes. Inser maximum 2mm layer of adhesive
under the tag. Please refer to silicone sealant supplier for
Mechanical fixing is recommended to be used in every
application that includes risk for high mechanical stress or
During fixing make sure
ap left in between the metal surface and
Customer specific encoding of EPC or user
permanently or with password
including logo, text,
Customer specific layout including logo, text,
can be attached with several
igh performance acrylic adhesive
When background adhesive is ordered the tag is delivered
When mounting the tag with its
adhesive background, clean and dry the surface for
th. Ideal application
temperature is from +21°C to +38°C (+70°F to +100°F),
bond strength can be improved with firm application
pressure and moderate heating from +38°C to +54°C
Installation at temperatures below
Silicone sealants like Dow Corning AS 7096 provide very
high bond strength and resistance against mechanical
stress. When tag is attached with sealant adhesive, insert a
er of sealant under the tag and press the tag on the
surface. Increase the bond by adding extra sealant from
the tag holes. Inser maximum 2mm layer of adhesive
under the tag. Please refer to silicone sealant supplier for
Mechanical fixing is recommended to be used in every
application that includes risk for high mechanical stress or
During fixing make sure
ap left in between the metal surface and
© Confidex 2013
permanently or with password.
including logo, text,
Customer specific layout including logo, text,
several
igh performance acrylic adhesive
When background adhesive is ordered the tag is delivered
When mounting the tag with its
adhesive background, clean and dry the surface for
th. Ideal application
temperature is from +21°C to +38°C (+70°F to +100°F),
bond strength can be improved with firm application
pressure and moderate heating from +38°C to +54°C
Installation at temperatures below
Silicone sealants like Dow Corning AS 7096 provide very
high bond strength and resistance against mechanical
stress. When tag is attached with sealant adhesive, insert a
er of sealant under the tag and press the tag on the
surface. Increase the bond by adding extra sealant from
the tag holes. Inser maximum 2mm layer of adhesive
under the tag. Please refer to silicone sealant supplier for
Mechanical fixing is recommended to be used in every
application that includes risk for high mechanical stress or
During fixing make sure
ap left in between the metal surface and
© Confidex 2013
01
.
several
When background adhesive is ordered the tag is delivered
When mounting the tag with its
adhesive background, clean and dry the surface for
th. Ideal application
temperature is from +21°C to +38°C (+70°F to +100°F),
bond strength can be improved with firm application
pressure and moderate heating from +38°C to +54°C
Installation at temperatures below
Silicone sealants like Dow Corning AS 7096 provide very
high bond strength and resistance against mechanical
stress. When tag is attached with sealant adhesive, insert a
er of sealant under the tag and press the tag on the
surface. Increase the bond by adding extra sealant from
the tag holes. Inser maximum 2mm layer of adhesive
under the tag. Please refer to silicone sealant supplier for
Mechanical fixing is recommended to be used in every
application that includes risk for high mechanical stress or
During fixing make sure
ap left in between the metal surface and
© Confidex 2013
01-2013
© Confidex 2013
2013
[email protected] www.confidex.com
© Confidex 2013
2013
www.confidex.com
Note that polarization of Confidex Ironside Micro
45˚ angle to the Confidex logo like shown in following
picture.
To achieve the optimal performance please
on metal like shown below
large even metal surface with direct metal contact
underneath the whole tag.
O
Product number
Product name:
Following products are
For
support contact Confidex Ltd.
DISCLAIMER
THE MATERIALS, PRODUCTS AND SERVICES ARE SOLD SUBJECT TO ITS STANDARD CONDITIONS OF
SALE, WHICH ARE
ALTHOUGH ANY INFORMATION, RECOMMENDATIONS, OR ADVICE CONTAINED HEREIN IS GIVEN
IN GOOD FAITH,
THE RESULTS DESCRIBED
THE EFFECTIVENESS OR SAFETY OF ANY
SERVICES, RECOMMENDATIONS OR ADVICE. EXCEPT AS
CONDITIONS OF SALE, CONFIDEX AND ITS RE
FOR ANY LOSS RESULTING FROM ANY USE OF ITS MATERIALS, PRODUCTS OR SERVICES
HEREIN.
Each user bears full responsibility for making its own determination as to the suitability of
Confidex products, ma
Each user must identify and perform all tests and analyses necessary to assure that its finished
systems incorporating Confidex products, materials, or services will be safe and suit
under end
or advice, shall be deemed to alter, vary, supersede, or
unless any such modification is specifically agreed t
© Confidex 2013
www.confidex.com
Note that polarization of Confidex Ironside Micro
˚ angle to the Confidex logo like shown in following
picture.
To achieve the optimal performance please
on metal like shown below
large even metal surface with direct metal contact
underneath the whole tag.
ORDER INFORMATION
Product number
Product name:
Following products are
Product number:
Product name:
Product number:
Product name:
Product number:
Product name:
For other versions,
support contact Confidex Ltd.
DISCLAIMER
THE MATERIALS, PRODUCTS AND SERVICES ARE SOLD SUBJECT TO ITS STANDARD CONDITIONS OF
SALE, WHICH ARE
ALTHOUGH ANY INFORMATION, RECOMMENDATIONS, OR ADVICE CONTAINED HEREIN IS GIVEN
IN GOOD FAITH,
THE RESULTS DESCRIBED
THE EFFECTIVENESS OR SAFETY OF ANY
SERVICES, RECOMMENDATIONS OR ADVICE. EXCEPT AS
CONDITIONS OF SALE, CONFIDEX AND ITS RE
FOR ANY LOSS RESULTING FROM ANY USE OF ITS MATERIALS, PRODUCTS OR SERVICES
HEREIN.
Each user bears full responsibility for making its own determination as to the suitability of
Confidex products, ma
Each user must identify and perform all tests and analyses necessary to assure that its finished
systems incorporating Confidex products, materials, or services will be safe and suit
under end
or advice, shall be deemed to alter, vary, supersede, or
unless any such modification is specifically agreed t
www.confidex.com
Note that polarization of Confidex Ironside Micro
˚ angle to the Confidex logo like shown in following
picture.
To achieve the optimal performance please
on metal like shown below
large even metal surface with direct metal contact
underneath the whole tag.
RDER INFORMATION
Product number
Product name:
Following products are
Product number:
Product name:
Product number:
Product name:
Product number:
Product name:
other versions,
support contact Confidex Ltd.
DISCLAIMER
THE MATERIALS, PRODUCTS AND SERVICES ARE SOLD SUBJECT TO ITS STANDARD CONDITIONS OF
SALE, WHICH ARE
ALTHOUGH ANY INFORMATION, RECOMMENDATIONS, OR ADVICE CONTAINED HEREIN IS GIVEN
IN GOOD FAITH,
THE RESULTS DESCRIBED
THE EFFECTIVENESS OR SAFETY OF ANY
SERVICES, RECOMMENDATIONS OR ADVICE. EXCEPT AS
CONDITIONS OF SALE, CONFIDEX AND ITS RE
FOR ANY LOSS RESULTING FROM ANY USE OF ITS MATERIALS, PRODUCTS OR SERVICES
Each user bears full responsibility for making its own determination as to the suitability of
Confidex products, ma
Each user must identify and perform all tests and analyses necessary to assure that its finished
systems incorporating Confidex products, materials, or services will be safe and suit
under end-use conditions.
or advice, shall be deemed to alter, vary, supersede, or
unless any such modification is specifically agreed t
www.confidex.com
Note that polarization of Confidex Ironside Micro
˚ angle to the Confidex logo like shown in following
To achieve the optimal performance please
on metal like shown below
large even metal surface with direct metal contact
underneath the whole tag.
RDER INFORMATION
Product number
Product name:
Following products are
Product number:
Product name:
Product number:
Product name:
Product number:
Product name:
other versions,
support contact Confidex Ltd.
THE MATERIALS, PRODUCTS AND SERVICES ARE SOLD SUBJECT TO ITS STANDARD CONDITIONS OF
SALE, WHICH ARE INCLUDED IN THE APPLICABLE DISTRIBUTOR OR OTHER SALES AGREEMENT.
ALTHOUGH ANY INFORMATION, RECOMMENDATIONS, OR ADVICE CONTAINED HEREIN IS GIVEN
IN GOOD FAITH, CONFIDEX MAKES NO WARRANTY OR GUARANTEE, EXPRESS OR IMPLIED, (i) THAT
THE RESULTS DESCRIBED
THE EFFECTIVENESS OR SAFETY OF ANY
SERVICES, RECOMMENDATIONS OR ADVICE. EXCEPT AS
CONDITIONS OF SALE, CONFIDEX AND ITS RE
FOR ANY LOSS RESULTING FROM ANY USE OF ITS MATERIALS, PRODUCTS OR SERVICES
Each user bears full responsibility for making its own determination as to the suitability of
Confidex products, ma
Each user must identify and perform all tests and analyses necessary to assure that its finished
systems incorporating Confidex products, materials, or services will be safe and suit
use conditions.
or advice, shall be deemed to alter, vary, supersede, or
unless any such modification is specifically agreed t
www.confidex.com
Note that polarization of Confidex Ironside Micro
˚ angle to the Confidex logo like shown in following
To achieve the optimal performance please
on metal like shown below
large even metal surface with direct metal contact
underneath the whole tag.
RDER INFORMATION
Product number
Product name: Confidex
Following products are
Product number:
Product name:
Product number:
Product name:
Product number:
Product name:
other versions,
support contact Confidex Ltd.
THE MATERIALS, PRODUCTS AND SERVICES ARE SOLD SUBJECT TO ITS STANDARD CONDITIONS OF
INCLUDED IN THE APPLICABLE DISTRIBUTOR OR OTHER SALES AGREEMENT.
ALTHOUGH ANY INFORMATION, RECOMMENDATIONS, OR ADVICE CONTAINED HEREIN IS GIVEN
CONFIDEX MAKES NO WARRANTY OR GUARANTEE, EXPRESS OR IMPLIED, (i) THAT
THE RESULTS DESCRIBED HEREI
THE EFFECTIVENESS OR SAFETY OF ANY
SERVICES, RECOMMENDATIONS OR ADVICE. EXCEPT AS
CONDITIONS OF SALE, CONFIDEX AND ITS RE
FOR ANY LOSS RESULTING FROM ANY USE OF ITS MATERIALS, PRODUCTS OR SERVICES
Each user bears full responsibility for making its own determination as to the suitability of
Confidex products, materials, services, recommendations, or advice for its own particular use.
Each user must identify and perform all tests and analyses necessary to assure that its finished
systems incorporating Confidex products, materials, or services will be safe and suit
use conditions.
or advice, shall be deemed to alter, vary, supersede, or
unless any such modification is specifically agreed t
Note that polarization of Confidex Ironside Micro
˚ angle to the Confidex logo like shown in following
To achieve the optimal performance please
on metal like shown below
large even metal surface with direct metal contact
underneath the whole tag.
RDER INFORMATION
Product number: 3000448
Confidex
Following products are
Product number:
Product name: Confidex
Product number:
Product name: Confidex
Product number:
Product name: Confidex
other versions,
support contact Confidex Ltd.
THE MATERIALS, PRODUCTS AND SERVICES ARE SOLD SUBJECT TO ITS STANDARD CONDITIONS OF
INCLUDED IN THE APPLICABLE DISTRIBUTOR OR OTHER SALES AGREEMENT.
ALTHOUGH ANY INFORMATION, RECOMMENDATIONS, OR ADVICE CONTAINED HEREIN IS GIVEN
CONFIDEX MAKES NO WARRANTY OR GUARANTEE, EXPRESS OR IMPLIED, (i) THAT
HEREIN WILL BE OBTAINED UNDER END
THE EFFECTIVENESS OR SAFETY OF ANY
SERVICES, RECOMMENDATIONS OR ADVICE. EXCEPT AS
CONDITIONS OF SALE, CONFIDEX AND ITS RE
FOR ANY LOSS RESULTING FROM ANY USE OF ITS MATERIALS, PRODUCTS OR SERVICES
Each user bears full responsibility for making its own determination as to the suitability of
terials, services, recommendations, or advice for its own particular use.
Each user must identify and perform all tests and analyses necessary to assure that its finished
systems incorporating Confidex products, materials, or services will be safe and suit
use conditions. Nothing in this or any other document, nor any oral recommendation
or advice, shall be deemed to alter, vary, supersede, or
unless any such modification is specifically agreed t
Note that polarization of Confidex Ironside Micro
˚ angle to the Confidex logo like shown in following
To achieve the optimal performance please
on metal like shown below
large even metal surface with direct metal contact
underneath the whole tag.
RDER INFORMATION
3000448
Confidex
Following products are
Product number: 3000
Confidex
Product number: 3000
Confidex
Product number: 3000
Confidex
other versions, additional information and technical
support contact Confidex Ltd.
THE MATERIALS, PRODUCTS AND SERVICES ARE SOLD SUBJECT TO ITS STANDARD CONDITIONS OF
INCLUDED IN THE APPLICABLE DISTRIBUTOR OR OTHER SALES AGREEMENT.
ALTHOUGH ANY INFORMATION, RECOMMENDATIONS, OR ADVICE CONTAINED HEREIN IS GIVEN
CONFIDEX MAKES NO WARRANTY OR GUARANTEE, EXPRESS OR IMPLIED, (i) THAT
N WILL BE OBTAINED UNDER END
THE EFFECTIVENESS OR SAFETY OF ANY
SERVICES, RECOMMENDATIONS OR ADVICE. EXCEPT AS
CONDITIONS OF SALE, CONFIDEX AND ITS RE
FOR ANY LOSS RESULTING FROM ANY USE OF ITS MATERIALS, PRODUCTS OR SERVICES
Each user bears full responsibility for making its own determination as to the suitability of
terials, services, recommendations, or advice for its own particular use.
Each user must identify and perform all tests and analyses necessary to assure that its finished
systems incorporating Confidex products, materials, or services will be safe and suit
Nothing in this or any other document, nor any oral recommendation
or advice, shall be deemed to alter, vary, supersede, or
unless any such modification is specifically agreed t
Note that polarization of Confidex Ironside Micro
˚ angle to the Confidex logo like shown in following
To achieve the optimal performance please
on metal like shown below
large even metal surface with direct metal contact
underneath the whole tag.
RDER INFORMATION
3000448
Confidex Ironside
Following products are available
3000
Confidex
3000
Confidex
3000
Confidex
additional information and technical
support contact Confidex Ltd.
THE MATERIALS, PRODUCTS AND SERVICES ARE SOLD SUBJECT TO ITS STANDARD CONDITIONS OF
INCLUDED IN THE APPLICABLE DISTRIBUTOR OR OTHER SALES AGREEMENT.
ALTHOUGH ANY INFORMATION, RECOMMENDATIONS, OR ADVICE CONTAINED HEREIN IS GIVEN
CONFIDEX MAKES NO WARRANTY OR GUARANTEE, EXPRESS OR IMPLIED, (i) THAT
N WILL BE OBTAINED UNDER END
THE EFFECTIVENESS OR SAFETY OF ANY
SERVICES, RECOMMENDATIONS OR ADVICE. EXCEPT AS
CONDITIONS OF SALE, CONFIDEX AND ITS RE
FOR ANY LOSS RESULTING FROM ANY USE OF ITS MATERIALS, PRODUCTS OR SERVICES
Each user bears full responsibility for making its own determination as to the suitability of
terials, services, recommendations, or advice for its own particular use.
Each user must identify and perform all tests and analyses necessary to assure that its finished
systems incorporating Confidex products, materials, or services will be safe and suit
Nothing in this or any other document, nor any oral recommendation
or advice, shall be deemed to alter, vary, supersede, or
unless any such modification is specifically agreed t
This corner near to
the metal edge
Note that polarization of Confidex Ironside Micro
˚ angle to the Confidex logo like shown in following
To achieve the optimal performance please
on metal like shown below. Ideally the tag is placed on
large even metal surface with direct metal contact
underneath the whole tag.
RDER INFORMATION
3000448
Ironside
available
3000449
Confidex Ironside
3000261
Confidex Ironside
3000262
Confidex Ironside
additional information and technical
support contact Confidex Ltd.
THE MATERIALS, PRODUCTS AND SERVICES ARE SOLD SUBJECT TO ITS STANDARD CONDITIONS OF
INCLUDED IN THE APPLICABLE DISTRIBUTOR OR OTHER SALES AGREEMENT.
ALTHOUGH ANY INFORMATION, RECOMMENDATIONS, OR ADVICE CONTAINED HEREIN IS GIVEN
CONFIDEX MAKES NO WARRANTY OR GUARANTEE, EXPRESS OR IMPLIED, (i) THAT
N WILL BE OBTAINED UNDER END
DESIGN INCORPORATING ITS PRODUCTS, MATERIALS,
SERVICES, RECOMMENDATIONS OR ADVICE. EXCEPT AS
CONDITIONS OF SALE, CONFIDEX AND ITS REPRESENTATIVES SHALL IN NO
FOR ANY LOSS RESULTING FROM ANY USE OF ITS MATERIALS, PRODUCTS OR SERVICES
Each user bears full responsibility for making its own determination as to the suitability of
terials, services, recommendations, or advice for its own particular use.
Each user must identify and perform all tests and analyses necessary to assure that its finished
systems incorporating Confidex products, materials, or services will be safe and suit
Nothing in this or any other document, nor any oral recommendation
or advice, shall be deemed to alter, vary, supersede, or
unless any such modification is specifically agreed t
This corner near to
the metal edge
Note that polarization of Confidex Ironside Micro
˚ angle to the Confidex logo like shown in following
To achieve the optimal performance please
. Ideally the tag is placed on
large even metal surface with direct metal contact
Ironside
available
449
Ironside
261
Ironside
262
Ironside
additional information and technical
support contact Confidex Ltd.
THE MATERIALS, PRODUCTS AND SERVICES ARE SOLD SUBJECT TO ITS STANDARD CONDITIONS OF
INCLUDED IN THE APPLICABLE DISTRIBUTOR OR OTHER SALES AGREEMENT.
ALTHOUGH ANY INFORMATION, RECOMMENDATIONS, OR ADVICE CONTAINED HEREIN IS GIVEN
CONFIDEX MAKES NO WARRANTY OR GUARANTEE, EXPRESS OR IMPLIED, (i) THAT
N WILL BE OBTAINED UNDER END
DESIGN INCORPORATING ITS PRODUCTS, MATERIALS,
SERVICES, RECOMMENDATIONS OR ADVICE. EXCEPT AS
PRESENTATIVES SHALL IN NO
FOR ANY LOSS RESULTING FROM ANY USE OF ITS MATERIALS, PRODUCTS OR SERVICES
Each user bears full responsibility for making its own determination as to the suitability of
terials, services, recommendations, or advice for its own particular use.
Each user must identify and perform all tests and analyses necessary to assure that its finished
systems incorporating Confidex products, materials, or services will be safe and suit
Nothing in this or any other document, nor any oral recommendation
or advice, shall be deemed to alter, vary, supersede, or
unless any such modification is specifically agreed to in a writing signed by Confidex.
Leave free area here
This corner near to
the metal edge
Note that polarization of Confidex Ironside Micro
˚ angle to the Confidex logo like shown in following
To achieve the optimal performance please
. Ideally the tag is placed on
large even metal surface with direct metal contact
Ironside Micro
available upon
Ironside
Ironside
Ironside
additional information and technical
THE MATERIALS, PRODUCTS AND SERVICES ARE SOLD SUBJECT TO ITS STANDARD CONDITIONS OF
INCLUDED IN THE APPLICABLE DISTRIBUTOR OR OTHER SALES AGREEMENT.
ALTHOUGH ANY INFORMATION, RECOMMENDATIONS, OR ADVICE CONTAINED HEREIN IS GIVEN
CONFIDEX MAKES NO WARRANTY OR GUARANTEE, EXPRESS OR IMPLIED, (i) THAT
N WILL BE OBTAINED UNDER END
DESIGN INCORPORATING ITS PRODUCTS, MATERIALS,
SERVICES, RECOMMENDATIONS OR ADVICE. EXCEPT AS
PRESENTATIVES SHALL IN NO
FOR ANY LOSS RESULTING FROM ANY USE OF ITS MATERIALS, PRODUCTS OR SERVICES
Each user bears full responsibility for making its own determination as to the suitability of
terials, services, recommendations, or advice for its own particular use.
Each user must identify and perform all tests and analyses necessary to assure that its finished
systems incorporating Confidex products, materials, or services will be safe and suit
Nothing in this or any other document, nor any oral recommendation
or advice, shall be deemed to alter, vary, supersede, or waive any provision of this Disclaimer,
o in a writing signed by Confidex.
Leave free area here
This corner near to
the metal edge
Note that polarization of Confidex Ironside Micro
˚ angle to the Confidex logo like shown in following
To achieve the optimal performance please
. Ideally the tag is placed on
large even metal surface with direct metal contact
Micro
upon special request:
Ironside Micro
Ironside Micro
Ironside Micro
additional information and technical
THE MATERIALS, PRODUCTS AND SERVICES ARE SOLD SUBJECT TO ITS STANDARD CONDITIONS OF
INCLUDED IN THE APPLICABLE DISTRIBUTOR OR OTHER SALES AGREEMENT.
ALTHOUGH ANY INFORMATION, RECOMMENDATIONS, OR ADVICE CONTAINED HEREIN IS GIVEN
CONFIDEX MAKES NO WARRANTY OR GUARANTEE, EXPRESS OR IMPLIED, (i) THAT
N WILL BE OBTAINED UNDER END
DESIGN INCORPORATING ITS PRODUCTS, MATERIALS,
PROVIDED IN CONFIDEX STANDARD
PRESENTATIVES SHALL IN NO
FOR ANY LOSS RESULTING FROM ANY USE OF ITS MATERIALS, PRODUCTS OR SERVICES
Each user bears full responsibility for making its own determination as to the suitability of
terials, services, recommendations, or advice for its own particular use.
Each user must identify and perform all tests and analyses necessary to assure that its finished
systems incorporating Confidex products, materials, or services will be safe and suit
Nothing in this or any other document, nor any oral recommendation
waive any provision of this Disclaimer,
o in a writing signed by Confidex.
Leave free area here
This corner near to
the metal edge
Note that polarization of Confidex Ironside Micro
˚ angle to the Confidex logo like shown in following
To achieve the optimal performance please
. Ideally the tag is placed on
large even metal surface with direct metal contact
MicroTM
Global
special request:
Micro
Micro
Micro
additional information and technical
THE MATERIALS, PRODUCTS AND SERVICES ARE SOLD SUBJECT TO ITS STANDARD CONDITIONS OF
INCLUDED IN THE APPLICABLE DISTRIBUTOR OR OTHER SALES AGREEMENT.
ALTHOUGH ANY INFORMATION, RECOMMENDATIONS, OR ADVICE CONTAINED HEREIN IS GIVEN
CONFIDEX MAKES NO WARRANTY OR GUARANTEE, EXPRESS OR IMPLIED, (i) THAT
N WILL BE OBTAINED UNDER END-USE CONDITIONS, OR (ii) AS TO
DESIGN INCORPORATING ITS PRODUCTS, MATERIALS,
PROVIDED IN CONFIDEX STANDARD
PRESENTATIVES SHALL IN NO
FOR ANY LOSS RESULTING FROM ANY USE OF ITS MATERIALS, PRODUCTS OR SERVICES
Each user bears full responsibility for making its own determination as to the suitability of
terials, services, recommendations, or advice for its own particular use.
Each user must identify and perform all tests and analyses necessary to assure that its finished
systems incorporating Confidex products, materials, or services will be safe and suit
Nothing in this or any other document, nor any oral recommendation
waive any provision of this Disclaimer,
o in a writing signed by Confidex.
Leave free area here
This corner near to
Note that polarization of Confidex Ironside Micro
˚ angle to the Confidex logo like shown in following
To achieve the optimal performance please locate the tag
. Ideally the tag is placed on
large even metal surface with direct metal contact
Global
special request:
MicroTM
MicroTM
MicroTM
additional information and technical
THE MATERIALS, PRODUCTS AND SERVICES ARE SOLD SUBJECT TO ITS STANDARD CONDITIONS OF
INCLUDED IN THE APPLICABLE DISTRIBUTOR OR OTHER SALES AGREEMENT.
ALTHOUGH ANY INFORMATION, RECOMMENDATIONS, OR ADVICE CONTAINED HEREIN IS GIVEN
CONFIDEX MAKES NO WARRANTY OR GUARANTEE, EXPRESS OR IMPLIED, (i) THAT
USE CONDITIONS, OR (ii) AS TO
DESIGN INCORPORATING ITS PRODUCTS, MATERIALS,
PROVIDED IN CONFIDEX STANDARD
PRESENTATIVES SHALL IN NO EVENT BE
FOR ANY LOSS RESULTING FROM ANY USE OF ITS MATERIALS, PRODUCTS OR SERVICES
Each user bears full responsibility for making its own determination as to the suitability of
terials, services, recommendations, or advice for its own particular use.
Each user must identify and perform all tests and analyses necessary to assure that its finished
systems incorporating Confidex products, materials, or services will be safe and suit
Nothing in this or any other document, nor any oral recommendation
waive any provision of this Disclaimer,
o in a writing signed by Confidex.
Leave free area here
This corner near to
Note that polarization of Confidex Ironside Micro
˚ angle to the Confidex logo like shown in following
locate the tag
. Ideally the tag is placed on
large even metal surface with direct metal contact
Global
special request:
Global M4E
ETSI Higgs3
FCC Higgs3
additional information and technical
THE MATERIALS, PRODUCTS AND SERVICES ARE SOLD SUBJECT TO ITS STANDARD CONDITIONS OF
INCLUDED IN THE APPLICABLE DISTRIBUTOR OR OTHER SALES AGREEMENT.
ALTHOUGH ANY INFORMATION, RECOMMENDATIONS, OR ADVICE CONTAINED HEREIN IS GIVEN
CONFIDEX MAKES NO WARRANTY OR GUARANTEE, EXPRESS OR IMPLIED, (i) THAT
USE CONDITIONS, OR (ii) AS TO
DESIGN INCORPORATING ITS PRODUCTS, MATERIALS,
PROVIDED IN CONFIDEX STANDARD
EVENT BE
FOR ANY LOSS RESULTING FROM ANY USE OF ITS MATERIALS, PRODUCTS OR SERVICES
Each user bears full responsibility for making its own determination as to the suitability of
terials, services, recommendations, or advice for its own particular use.
Each user must identify and perform all tests and analyses necessary to assure that its finished
systems incorporating Confidex products, materials, or services will be safe and suit
Nothing in this or any other document, nor any oral recommendation
waive any provision of this Disclaimer,
o in a writing signed by Confidex.
Leave free area here
Note that polarization of Confidex Ironside MicroTM
˚ angle to the Confidex logo like shown in following
locate the tag
. Ideally the tag is placed on
large even metal surface with direct metal contact
Global M4QT
special request:
Global M4E
ETSI Higgs3
FCC Higgs3
additional information and technical
THE MATERIALS, PRODUCTS AND SERVICES ARE SOLD SUBJECT TO ITS STANDARD CONDITIONS OF
INCLUDED IN THE APPLICABLE DISTRIBUTOR OR OTHER SALES AGREEMENT.
ALTHOUGH ANY INFORMATION, RECOMMENDATIONS, OR ADVICE CONTAINED HEREIN IS GIVEN
CONFIDEX MAKES NO WARRANTY OR GUARANTEE, EXPRESS OR IMPLIED, (i) THAT
USE CONDITIONS, OR (ii) AS TO
DESIGN INCORPORATING ITS PRODUCTS, MATERIALS,
PROVIDED IN CONFIDEX STANDARD
EVENT BE RESPONSIBLE
FOR ANY LOSS RESULTING FROM ANY USE OF ITS MATERIALS, PRODUCTS OR SERVICES
Each user bears full responsibility for making its own determination as to the suitability of
terials, services, recommendations, or advice for its own particular use.
Each user must identify and perform all tests and analyses necessary to assure that its finished
systems incorporating Confidex products, materials, or services will be safe and suitable for use
Nothing in this or any other document, nor any oral recommendation
waive any provision of this Disclaimer,
o in a writing signed by Confidex.
Leave free area here
TM is in
˚ angle to the Confidex logo like shown in following
locate the tag
. Ideally the tag is placed on
large even metal surface with direct metal contact
M4QT
special request:
Global M4E
ETSI Higgs3
FCC Higgs3
additional information and technical
THE MATERIALS, PRODUCTS AND SERVICES ARE SOLD SUBJECT TO ITS STANDARD CONDITIONS OF
INCLUDED IN THE APPLICABLE DISTRIBUTOR OR OTHER SALES AGREEMENT.
ALTHOUGH ANY INFORMATION, RECOMMENDATIONS, OR ADVICE CONTAINED HEREIN IS GIVEN
CONFIDEX MAKES NO WARRANTY OR GUARANTEE, EXPRESS OR IMPLIED, (i) THAT
USE CONDITIONS, OR (ii) AS TO
DESIGN INCORPORATING ITS PRODUCTS, MATERIALS,
PROVIDED IN CONFIDEX STANDARD
RESPONSIBLE
DESCRIBED
Each user bears full responsibility for making its own determination as to the suitability of
terials, services, recommendations, or advice for its own particular use.
Each user must identify and perform all tests and analyses necessary to assure that its finished
able for use
Nothing in this or any other document, nor any oral recommendation
waive any provision of this Disclaimer,
is in
˚ angle to the Confidex logo like shown in following
locate the tag
. Ideally the tag is placed on
large even metal surface with direct metal contact
Global M4E
ETSI Higgs3
FCC Higgs3
additional information and technical
THE MATERIALS, PRODUCTS AND SERVICES ARE SOLD SUBJECT TO ITS STANDARD CONDITIONS OF
INCLUDED IN THE APPLICABLE DISTRIBUTOR OR OTHER SALES AGREEMENT.
ALTHOUGH ANY INFORMATION, RECOMMENDATIONS, OR ADVICE CONTAINED HEREIN IS GIVEN
CONFIDEX MAKES NO WARRANTY OR GUARANTEE, EXPRESS OR IMPLIED, (i) THAT
USE CONDITIONS, OR (ii) AS TO
DESIGN INCORPORATING ITS PRODUCTS, MATERIALS,
PROVIDED IN CONFIDEX STANDARD
RESPONSIBLE
DESCRIBED
Each user bears full responsibility for making its own determination as to the suitability of
terials, services, recommendations, or advice for its own particular use.
Each user must identify and perform all tests and analyses necessary to assure that its finished
able for use
Nothing in this or any other document, nor any oral recommendation
waive any provision of this Disclaimer,
is in
˚ angle to the Confidex logo like shown in following
locate the tag
. Ideally the tag is placed on
large even metal surface with direct metal contact
additional information and technical
THE MATERIALS, PRODUCTS AND SERVICES ARE SOLD SUBJECT TO ITS STANDARD CONDITIONS OF
INCLUDED IN THE APPLICABLE DISTRIBUTOR OR OTHER SALES AGREEMENT.
ALTHOUGH ANY INFORMATION, RECOMMENDATIONS, OR ADVICE CONTAINED HEREIN IS GIVEN
CONFIDEX MAKES NO WARRANTY OR GUARANTEE, EXPRESS OR IMPLIED, (i) THAT
USE CONDITIONS, OR (ii) AS TO
DESIGN INCORPORATING ITS PRODUCTS, MATERIALS,
PROVIDED IN CONFIDEX STANDARD
RESPONSIBLE
DESCRIBED
Each user bears full responsibility for making its own determination as to the suitability of
terials, services, recommendations, or advice for its own particular use.
Each user must identify and perform all tests and analyses necessary to assure that its finished
able for use
Nothing in this or any other document, nor any oral recommendation
waive any provision of this Disclaimer,