PRODUCT CATALOGUE€¦ · WEIGHT: 2 kg UNITS PER PACK: 1 SPECS: 3000mm M12 Threaded Rod is supplied...

PRODUCT CATALOGUE

ACP Document.

ACP Catalogue Rev09

20 July 2020

Company: Australian Concrete Posts Pty Ltd

Email: [email protected]

Phone: 02 6682 8614

Website: www.ConcretePosts.com.au

Postal: PO Box 94 Alstonville NSW 2477

Factory: 354 Broadwater Road Dungarubba NSW 2480

TABLE OF CONTENTS

1. CONTACT US

2. PRODUCTS AND CODES

a) Concrete Fence Posts

b) Concrete Strainer Posts

c) Driving Caps

d) Assembly Strainer Kits

e) Assembly Components

f) Brackets

g) Extras & Miscellaneous Items

3. ITEM CODES – (NOT FOR SALE)

FENCE POST CODES

FENCE POSTS

1. 130mm Wide – for Cattle, Horses & Livestock

a) FP01 - 1900mm tall w 5H

b) FP02 - Discontinued

c) FP03 - 2150mm tall w 5H

d) FP04 - 2400mm tall w 4H

2. 110mm wide – Suitable for small livestock & residential

a) FP22 - 2200mm tall w 4H

b) FP21 – 1900mm tall Notched

c) FP23 – 1800mm tall

d) FP24 – 2050mm tall

e) FP25 – 2400mm tall

f) FP26 – 3000mm tall

FP01

DESCRIPTION:

130mm x1900mm (6.4ft) 5x30mm & 10x10mm Hole Concrete Fence Post

SALE CODE: FP01

WEIGHT: 36 kg

UNITS PER PACK: 30 posts per pack

PACK WEIGHT: 1050kg

USES: This is the standard intermediate fence post for rural fencing. For stock fences we suggest that the 130mm is most suitable intermediate post.

The hole spacing on this post matches a standard waratah star picket.

The bottom hole is generally at ground level.

Australian Concrete Posts Pty Ltd

W. ConcretePosts.com.au

E. [email protected]

T. 02 6682 8614

FP02

DESCRIPTION:

130mm x2150mm (7ft) 5x30mm & 1x10mm Hole Concrete Fence Post

SALE CODE: FP02

WEIGHT: 40 kg


PACK WEIGHT: 1200kg

USES: This is the taller intermediate fence post for rural fencing. For stock fences we suggest that the 130mm wide post is most suitable intermediate post.






Refer to FP03

FP03

DESCRIPTION:

130mm x2150mm (7ft) 5x30mm & 10x10mm Hole Concrete Fence Post

SALE CODE: FP03

WEIGHT: 40 kg


PACK WEIGHT: 1200kg

USES: This is the taller intermediate fence post for rural fencing. For stock fences we suggest that the 130mm wide post is most suitable intermediate post.






FP04

DESCRIPTION:


SALE CODE: FP04

WEIGHT: 41 kg


PACK WEIGHT: 1230kg

USES: This is the standard 4 hole intermediate fence post for rural fencing. For stock fences we suggest that the 130mm wide post is most suitable intermediate post.

This is our QLD post – made to specs given to us from farmers in central QLD.





FP22

DESCRIPTION:


SALE CODE: FP22

WEIGHT: 34 kg


PACK WEIGHT: 1020 kg

USES: This is the narrower 4 hole intermediate fence post.

For stock fences we suggest that the thicker 130mm (FP04) wide post is a stronger and more suitable post.





T. 02 6682 8614

FP21

DESCRIPTION:

110mm x1900mm (6.4ft) Notched Concrete Fence Post

SALE CODE: FP21

WEIGHT: 29 kg


PACK WEIGHT: 870 kg

USES: This is the notched intermediate fence post. Used as a replacement post to prop up a falling down fence. Great to tie on wire mesh.

Notches are spaced to match the standard waratah star picket.




T. 02 6682 8614

FP23

DESCRIPTION:

110mm x 1800mm (5.9ft) 7x13mm Hole Concrete Fence Post

SALE CODE: FP23

WEIGHT: 27.5 kg


PACK WEIGHT: 826 kg

USES: This is the narrower (110mm wide) fence post. For stock fences we suggest that the thicker 130mm wide post .

Use to build residential or garden fences.

We recommend a thicker 130mm wide post for cattle or horses.





FP24

DESCRIPTION:

110mm x 2050mm (6.7ft) 8 x13mm Hole Concrete Fence Post

SALE CODE: FP24

WEIGHT: xx kg


PACK WEIGHT: xxx kg

USES: This is the narrower (110mm wide) fence post. For stock fences we suggest that the thicker 130mm wide post .

Use to build residential or garden fences.






FP25

DESCRIPTION: 110mm x2400mm (8ft) w 10x 13mm holes Concrete Fence Post

SALE CODE: FP25

WEIGHT: 37 kg



USES: This is the 110mm wide 2400mm (8ft) tall intermediate fence post.

Used to build tall fences. For residential fences or for exclusion fencing.





FP26

DESCRIPTION: 110mm x3000mm (10ft) w 12x13mm holes Concrete Fence Post

SALE CODE: FP26

WEIGHT: 46.5 kg



USES: This is the 110mm wide 3000mm (10ft) tall intermediate fence post.

Used to build tall residential fences or for exclusion fencing or trellis support.





STRAINER POST CODES

STRAINER POSTS - 170mm Wide

a) SP01 – 7ft – 2150mm

b) SP02 – 8ft – 2400mm

c) SP04 – 10ft – 3000mm

SP01

DESCRIPTION:

170x2150mm (7ft) Concrete Strainer Post

SALE CODE: SP01

WEIGHT: 106 kg


PACK WEIGHT: 640 kg

USES: 170mm wide 2150mm (7ft) Straining post.

Use as straining posts for end assemblies and gate posts.

Predrilled holes to fit Gate Kits. (AC04)

The 5x30mm holes match the FP01 & FP03 Fence posts.

5 x 16mm holes for gate kits




SP02

DESCRIPTION:

170x2400mm (8ft) Concrete Strainer Post

SALE CODE: SP02

WEIGHT: 116 kg


PACK WEIGHT: 715 kg







SP04

DESCRIPTION:

170mm x 3000mm (10ft) Concrete Strainer Post

SALE CODE: SP04

WEIGHT: 150 kg


PACK WEIGHT: 900 kg







DRIVING CAP CODES

DRIVING CAPS

• DC01 – (Small for Posts)

• DC02 - (Large for Strainers)

• DC03 – Small Replacement Rubber

• DC04 - Large Replacement Rubber

DC01

DESCRIPTION: Post Driver Cap (Small)

SALE CODE: DC01

WEIGHT: 3.3 kg

UNITS PER PACK: 1

USE: Use this for Driving cap for concrete FENCE post. 110mm and 130mm wide.

Used to minimise the direct impact on top of the concrete posts when driving with a drop hammer (thumper) style post driver. If posts are driven in the ground without any rubber between the top of the post and the driver head they will crack. This driving cap is designed to be used to minimise that impact. If using a percussion or pneumatic driver another cap needs to be used, See the website for more information.

https://concreteposts.com.au/driving-caps/




DC02

DESCRIPTION: Post Driver Cap (Large)

SALE CODE: DC02

WEIGHT: 3.3 kg

UNITS PER PACK: 1

USE: Use this for Driving cap for concrete STRAINER post.

170mm wide.

Used to minimise the direct impact on top of the concrete STRAINER

posts when driving with a drop hammer (thumper) style post driver. If

posts are driven in the ground without any rubber between the top of

the post and the driver head they will crack. This driving cap is designed

to be used to minimise that impact. If using a percussion or pneumatic

driver another cap needs to be used, See the website for more

information. https://concreteposts.com.au/driving-caps/Australian Concrete Posts Pty Ltd



DC03

DESCRIPTION: Driving Cap Replacement Rubber (Small)

SALE CODE: DC03

WEIGHT: 0.25 kg

UNITS PER PACK: 1

USE:

Belt rubber insert to replace worn out rubber in existing driving cap.

Simply remove the existing rubber and insert new rubber. The rubber should last hundreds of hits, but when it wears thin it should be replaced with new rubber.

The more rubber in the cap the better for the posts when driving them. The rubber minimises the direct impact on the top of the posts when driving in the ground.

Replacement rubber for small driving cap (DC01)




DC03DC04

DC03

DC04

DESCRIPTION: Driving Cap Replacement Rubber (Large)

SALE CODE: DC04

WEIGHT: 0.65 kg

UNITS PER PACK: 1

USE:

Belt rubber insert to replace worn out rubber in existing driving cap.

Simply remove the existing rubber and insert new rubber. The rubber should last hundreds of hits, but when it wears thin it should be replaced with new rubber.

The more rubber in the cap the better for the posts when driving them. The rubber minimises the direct impact on the top of the posts when driving in the ground.

Replacement rubber for large driving cap (DC02)




DC03DC04

STRAINER ASSEMBLY KITS

1. BOX END KITS

a) With Long Stay (3250mm)

a) SA.BL.1W

b) SA.BL.2W

c) SA.BL.3W

b) With Short Stay (2150mm)

a) SA.BS.1W

b) SA.BS.2W

c) SA.BS.3W

2. ADJUSTABLE W CONCRETE KIT

a) SA.AC.1W

b) SA.AC.2W

c) SA.AC.2C

3. ADJUSTABLE W STEEL KIT

1. SA.AS.1W

2. SA.AS.2W

3. SA.AS.3W

SA.BL.1W

DESCRIPTION: Strainer Assembly Kit

Box End Strainer Kit Long Stay One Way

SALE CODES: SA.BL.1W

PRODUCT CODES: (Kit includes the following items):

• BK170.RND X 1

• BK130.RND X 1

• AC02 X 1

• AC07 x 1

KIT WEIGHT: 11.6 kg

FEATURES: Longer Stay Pipe (3250mm)

USE: For straining the fence line on the end of a fence line or at each side of a gate opening.

For a change in direction or corner use the 2 way configuration.




BK170.RND

BK130.RND

AC02

BK170.RND

AC07

BK130.RND

AC02

One Way w Long Stay Pipe

SA.BL.2W


Box End Strainer Kit w Long Stay Two Way



• BK170.RND X 1

• BK130.RND X 2

• BK000.RND x 1

• AC02 X 2

• AC07 x 1

KIT WEIGHT: 22.5 kg


USE: For straining the fence line.

This configuration is for an Inline or 2 way configuration or a Corner, or change of direction.




BK170.RND

BK130.RND

AC07

AC02

BK000.RND

Two Way / Corner / Direction Change

Two Way / Inline w Long Stay Pipe

SA.BL.3W


Box End Strainer Kit w Long Stay Three Way



• BK170.RND X 1

• BK130.RND X 3

• BK000.RND x 2

• AC02 X 3

• AC07 x 1

KIT WEIGHT: 33.40 kg



This configuration is for 3 way junction configuration.




BK170.RND

BK130.RND

AC07

AC02

BK000.RND

Three Way / T-Junction w Long Stay Pipe

SA.BS.1W


Box End Strainer Kit Short Stay One Way

SALE CODES: SA.BS.1W


• BK170.RND X 1

• BK130.RND X 1

• AC01 X 1

• AC07 x 1

KIT WEIGHT: 8.6 kg

FEATURES: Shorter Stay Pipe (2150mm)

USE: For straining the fence line on the end of a fence line or at each side of a gate opening.

For a change in direction or corner use the 2 way configuration.




BK170.RND

BK130.RND

AC01

BK170.RND

AC07

BK130.RND

AC01

One Way w Short Stay Pipe

AC07

SA.BS.2W


Box End Strainer Kit Short Stay Two Way



• BK170.RND X 1

• BK130.RND X 2

• Bk000.RND x 1

• AC01 X 2

• AC07 x 1




This configuration is for an Inline or 2 way configuration or a Corner, or change of direction.




BK170.RND

BK130.RND

AC07

AC01

BK000.RND

Two Way / Inline w Short Stay Pipe

Two Way / Corner / Direction Change

SA.BS.3W


Box End Strainer Kit w Short Stay Three Way



• BK170.RND X 1

• BK130.RND X 3

• BK000.RND x 2

• AC01 X 3

• AC07 x 1




This configuration is for 3 way junction configuration.




BK170.RND

BK130.RND

AC07

AC01

BK000.RND

Three Way / T-Junction w Short Stay Pipe

SA.AC.1W


Adjustable Stay w Concrete Pad One Way

SALE CODES: SA.AC.1W


• BK170.RND X 1

• AC02 X 1

• AC05 x 1

• AC06 x 1

KIT WEIGHT: 52 kg

FEATURES: Concrete Stay Pad with Threaded Rod

USE: Concrete Stay Pad (AC05) holds stay rail (AC02) in position and connects to Strainer Post with Threaded Rod (AC06).

This is for one direction only.




AC02

BK170.RNDAC06

AC05

BK170.RND

AC06

AC02

AC05

One Way

SA.AC.2W


Adjustable Stay w Concrete Pad Two Way

SALE CODES: SA.AC.2W


• BK170.RND X 1

• BK000.RND X 1

• AC02 X 2

• AC05 x 2

• AC06 x 2


FEATURES: Concrete Stay Pad with Threaded Rod

USE: Concrete Stay Pad (AC05) holds stay rail (AC02) in position and connects to Strainer Post with Threaded Rod (AC06).

This is for an inline or 2 way direction only.

Use another kit for a 90 degree corner.




AC02

AC05

AC06BK170.RND &

BK000.RND

Two Way / Inline

SA.AC.2C


Adjustable Stay w Concrete Pad Corner

SALE CODES: SA.AC.2C


• BK170.RND X 1

• BK000.RND X 1

• BK170.DIR X 1

• AC02 X 2

• AC05 x 2

• AC06 x 2


FEATURES: Direction Change Bracket for a 90 degree Corner

USE: Concrete Stay Pad (AC05) holds stay rail (AC02) in position and connects to Strainer Post with Threaded Rod (AC06). The Direction change bracket supports the Threaded rod into the base of the strainer post on a corner.




BK170.RND

BK000.RND

BK170.DIR

AC02

AC05AC06

AC05 AC06

AC05

BK170.DIR

Two Way Corner

SA.AS.1W


Adjustable Cable Stay w Steel Footplate One Way

SALE CODES: SA.AS.1W


• BK170.RND X 1

• AC02 X 1

• AC10 x 1

• AC11 x 1

KIT WEIGHT: 17 kg

FEATURE: Steel Footplate and Tensioning Cable

USE: Steel Footplate holds stay rail (AC02) in position and connects to Strainer Post with Tension Cable (AC10)

A lightweight alternative and quick to install straining system.




AC02

AC10

AC11

BK170.RND

One Way

SA.AS.2W


Adjustable Cable Stay w Steel Footplate Two Way



• BK170.RND X 1

• BK000.RND x 1

• AC02 X 2

• AC10 x 2

• AC11 x 2



USE: Steel Footplate holds stay rail (AC02) in position and connects to Strainer Post with Tension Cable (AC10)

A lightweight alternative and quick to install straining system.




AC02

AC10

AC11

BK170.RND

BK000.RND

Two Way / Inline / Corner

/ Change of Direction

SA.AS.3W


Adjustable Cable Stay w Steel Footplate Three Way Junction



• BK170.RND X 1

• BK000.RND x 2

• AC02 X 3

• AC10 x 3

• AC11 x 3



USE: This configuration is for 3 way junction configuration.




NOTE: THIS PIC

DOES NOT

represent 3 way

junction refer

to description

and parts for

accurate info.

AC02

AC10

AC11

BK170.RND

BK000.RND

Three Way / T-Junction

ASSEMBLY COMPONENTS CODES

1. Round Stay Pipe

• AC01

• AC02

2. Cattle Rail

• AC03

3. Gate Kit

• AC04

4. Adjustable Assembly Parts

• AC05 – Threaded Rod

• AC06 – Concrete Stay Pad

• AC07 – Positioning Pin

• AC08 – Discontinued

• AC09 - Discontinued

• AC10 – Steel Cable

• AC11 – Steel Footplate

• AC12 – M12 Tube Socket

AC01 & AC02

DESCRIPTION:

Round Stay Rail Galvanised 50 NB. 2 lengths available.

SALE CODES: AC01 – 2150mm Galvanised Rail (50NB)

AC02 – 3250mm Galvanised Rail (50NB)

WEIGHT: 7 kg (AC01) & 10kg (AC02)

UNITS PER PACK: 1

SPECS:

Hot dipped galvanized coating, “Light” Tubular sections meet S/NZ 1163-C350, 50 Nominal Bore – 60 mm outside diameter (OD) with 2.6 mm Wall Thickness

USES:

Round galvanised pipe used as stay pipe on end straining assemblies. Use longer length for extra strength.

We recommend to use the longer AC02 (3250mm) pipe for the diagonal rail in the Adjustable Stay Assembly. When using the Stay pipe in the Box End Assembly the longer stay makes a stronger end, when you tension the diagonal wire the strength is maximised when using a longer stay.




AC03

DESCRIPTION:

Cattle Rail 6100mm Galvanised Rail

SALE CODES: AC03 – 6100mm long

WEIGHT: 26.25 kg

UNITS PER PACK: 1

SPECS:

6100mm long, 115x42mm 2.0 – 2.5mm wall thickness, Duraprimed, Galvanized Steel, ILG to AS/NZS 4792 ILG100

USES:

Use cattle rail to make feature entrances and post and rail fences.

ACP’s patented bracket system makes building a fence with concrete fence posts strong, long-lasting and quick and easy to build.

Attach to concrete post with Collar Bracket (BK.COL), Cattle Mid Rail Bracket (BK.CTM) or with Top Bracket (BK.TOP)




T. 02 6682 8614

AC04

DESCRIPTION:

Gate Kit for Concrete Strainer Post

SALE CODES: AC04

WEIGHT: 2.5 kg

UNITS PER PACK: 1

SPECS:

Kit includes: Bolt-Thru adjustable Bottom Gudgeon –25NB HDG, Bolt-Thru Adjustable Top Strap – 25NB HDG, Bolt-Thru Hook Latch with Heavy Duty 500mm Chain, Adjustable keeper plate, Four large 50mm Washers and nuts ensures the gate kit doesn’t pull through the post.

USE:

This kit makes a standard gate easy to attach to a concrete straining post and fence. Holes are pre-drilled in the Concrete Strainer post to support this Gate Kit.




AC05

DESCRIPTION:

M12 Galvanized Threaded Rod with Square Washer and Hex Nut

SALE CODES: AC05

WEIGHT: 2 kg

UNITS PER PACK: 1

SPECS:

3000mm M12 Threaded Rod is supplied with 1 washer and 2 nuts, Fits in pre-drilled holes of Straining post and Brace plate of Concrete Stay Pad

USES:

For an Adjustable Stay Straining Assembly use the AC04 to connect the Concrete Stay Pad (AC06) to the Concrete Strainer Post.

For a change in direction or corner, use the Direction Change Bracket (BK170.DIR) to support the Threaded Rod on side of the straining post that doesn’t have holes.




AC06

DESCRIPTION: Concrete Stay Pad with Brace Plate

SALE CODES: AC06

WEIGHT: 39.5 kg

UNITS PER PACK: 1

SPECS:

Made with 40 MPA concrete, same special mix as ACP concrete

fence posts. 400mm x 400mm x 100mm. Each pad weighs 39.3 kg

Includes galvanized steel brace plate which support and hold

Threaded Rod (AC05) and Stay Rail (AC02) in position next to

concrete pad.

USES:

Concrete Stay Pad with Brace Plate is one of the components

used to make the Adjustable Stay Assembly.




AC07

DESCRIPTION:

200mm Post Box End Positioning Pin

SALE CODES: AC07

WEIGHT: 0.3 kg

UNITS PER PACK: 1

SPECS: 200mm steel rod

USE: Used to loop the bottom twitching diagonal wire on the

outside edge, on the strainer post in a Box End Assembly.

HINT: Some folk just thread the wire through the bottom hole

instead of using this pin, or alternatively come up with a piece of

steel rod through the hole.




AC08

DESCRIPTION: Insulator - Dingo

ITEM CODE: IT127

SALE CODE: AC08

WEIGHT: 0.050 kg

UNITS PER PACK: 1

USE: Used as insulate hole in concrete fence posts for

hot wires.




T. 02 6682 8614

AC09

DESCRIPTION: Insulator - Conduit

SALE CODE: AC09

WEIGHT: 0.050 kg

UNITS PER PACK: 1

USE: Used as insulate hole in concrete fence posts for

hot wires.

HINT: Most clients will just buy a length of conduit and cut

their own.




T. 02 6682 8614

AC10

DESCRIPTION:

Adjustable Tension Cable with Nut & Washer

SALE CODES: AC10

WEIGHT: 1.5 kg

UNITS PER PACK: 1

USE: Used to connect the concrete Stainer Post to Steel Footplate (AC11) and Stay Rail (AC02) in an Adjustable End Straining Assembly Steel configuration.

Can be used with Concrete Stay Pad as well. (AC06)

Quicker and easier to use than threaded rod scenario as it is flexible and can be used in various angles.




AC11

DESCRIPTION:

Steel Footplate for Adjustable End Straining Assembly

SALE CODES: AC11

WEIGHT: 4.8 kg

UNITS PER PACK: 1

USE:

Steel Footplate holds stay rail (AC02) in position and connects to

Strainer Post with Tension Cable (AC10)

A lightweight long lasting alternative to the Concrete Stay Pad and

Threaded Rod Adjustable End Straining system.

Steel Footplate can be used with Threaded Rod as well.




AC12

DESCRIPTION: M12 Tube Socket

SALE CODE: AC12

WEIGHT: 0.38 kg

UNITS PER PACK: 1

USE: Use this tube socket to tighten the hex nut on the Tension

Cable (AC10) on Adjustable End Assembly Steel




T. 02 6682 8614

BRACKET CODES

1. BK.RND

• BK000.RND

• BK110.RND

• BK130.RND

• BK170.RND

2. BK.COL

• BK110.COL

• BK130.COL

• BK170.COL

3. BK.CTM

• BK000.CTM

• BK110.CTM

• BK130.CTM

• BK170.CTM

4. BK.TOP

• BK000.TOP

• BK110.TOP

• BK130.TOP

• BK170.TOP

5. BK.TRI

• BK000.TRI

• BK110.TRI

• BK130.TRI

• BK170.TRI

6. BK VARIOUS

• BK170.DIR

• BK000.CNR

• BK000.CRP

• BK110.2W

• BK130.2W

• BK130.4W

• BK170.4W

BK170.RND

DESCRIPTION:

170mm Strainer Bracket Set (Round)

SALE CODE: BK170.RND

WEIGHT: 0.65 kg

UNITS PER PACK: 1

USE: On Strainer Assemblies to attach rail

to the strainer post.




BK130.RND

DESCRIPTION:

130mm Post Bracket Set (Round)


UNITS PER PACK: 1

WEIGHT: 0.5 kg

USE: Easy to attach round rail

to the 130mm fence post.




BK110.RND

DESCRIPTION:

110mm Post Bracket Set (Round)


UNITS PER PACK: 1

WEIGHT: 0.5 kg

USE: Easy to attach round rail

to the 110mm concrete fence post.




BK000.RND

DESCRIPTION:

Single Rail Support Bracket Set (Round)


WEIGHT: 0.3 kg

USE: Attach round rail to the another

side of strainer or fence post bracket set.

Makes a 2-way or 3-way bracket set




BK110.COL

DESCRIPTION: Collar Bracket for 110mm Post

SALE CODE: BK110.COL

WEIGHT: 0.25 kg

UNITS PER PACK: 1

SPECS: Made with a hot-dipped zinc/iron alloy-coated commercial forming steel.

No bolts or screws are supplied with these brackets. A tech screw is all that’s required. Pre-drilled holes on the side of the bracket will match the holes on the posts, however, they are there as an option and not required to attach the bracket to the post.

Brackets are made a few millimeters short of the width of the post, so that when you attach the bracket to the rail it will pull tightly up against the post.

USES: Used to attach cattle rail or timber rail to the front side of 170mm concrete Strainer post.

Use this bracket to build a garden fence, to build a post and rail fence, or feature entrance fence.

Collar Bracket to fit 110mm Post – (FP21, FP22, FP23, FP24, FP25, FP26)




BK130.COL

DESCRIPTION: Collar Bracket for 130mm Post


WEIGHT: 0.280 kg

UNITS PER PACK: 1






Collar Bracket to fit 130mm Post – (FP01, FP03, FP04)




T. 02 6682 8614

BK170.COL

DESCRIPTION: Collar Bracket for 170mm Strainer Post


WEIGHT: 0.390 kg

UNITS PER PACK: 1






Collar Bracket to fit 170mm Strainer Post – (SP01, SP02, SP04)




BK000.CTM

DESCRIPTION:

Single Cattle Rail Support Bracket (Cattle Rail)

SALE CODE: BK000.CTM

WEIGHT: 0.4 kg

UNITS PER PACK: 1

USES: When using cattle rail or timber as between

concrete posts, like a Post and Rail assembly with Cattle

Rail or Timber.

(SEE PICS) Use the Single bracket to add to the

BK130.CTM to make a double sided bracket




BK110.CTMBK130.CTM

DESCRIPTION:

110mm or 130mm Post Bracket Set (Cattle Mid)


BK130.CTM

WEIGHT: 0.8 kg

UNITS PER PACK: 1

USES: When using cattle rail or timber as between130mm or 110mm concrete FENCE posts, like a Post and Rail assembly with Cattle Rail or Timber.

(SEE PIC) Use the Single bracket to add to the BK130.CTM to make a double-sided bracket




BK170.CTM

DESCRIPTION:

170mm Strainer Post Bracket Set (Cattle Mid)


WEIGHT: 0.8 kg

UNITS PER PACK: 1

USES: When using cattle rail or timber as between

170mm concrete STRAINER posts, like a Post and

Rail assembly with Cattle Rail or Timber.

(SEE PIC) Use the Single bracket to add to the

BK170.CTM to make a double-sided bracket (2 way)




T. 02 6682 8614

BK000.TOP

DESCRIPTION: Single Top Rail Fixer Bracket

SALE CODE: BK000.TOP

WEIGHT: 0.5 kg

UNITS PER PACK: 1

SPECS: Made with a hot-dipped zinc/iron alloy-coated

commercial forming steel.

Includes nuts and bolt, and connector bracket.

USES: Use this bracket with galvanized cattle rail (AC04) or a

timber board as a TOP RAIL along your fence. Looks great on

boundary or feature property entrances, and stockyard

fence.

(SEE PICS) Use the Single bracket to add to the BK130.TOP

to make a double-sided bracket




BK110.TOPBK130.TOP

DESCRIPTION:

130mm or 110mm Post Bracket Set (Top)


BK130.TOP

WEIGHT: 0.7 kg

UNITS PER PACK: 1

SPECS: Top Bracket made with a hot-dipped zinc/iron alloy-coated commercial forming steel. Order the rectangular bracket to fit which width post you have 110mm or 130mm or 170mm Strainer

USES: Use this bracket with galvanised cattle rail (AC04) or a timber board as a TOP RAIL along your fence.

Looks great on boundary or feature property entrances, and stockyard fence.




T. 02 6682 8614

BK170.TOP

DESCRIPTION:

170mm Strainer Post Bracket Set (Top)


WEIGHT: 0.7 kg

UNITS PER PACK: 1

SPECS: Top Bracket made with a hot-dipped zinc/iron alloy-coated commercial forming steel.

Order the rectangular bracket to fit which width post you have 110mm or 130mm or 170mm Strainer

USES: Use this bracket with galvanised cattle rail (AC04) or a timber board as a TOP RAIL along your fence.

Looks great on boundary or feature property entrances, and stockyard fence.




BK000.TRI

DESCRIPTION:

Single Star Picket Support Bracket (Triangular)

SALE CODE: BK000.TRI

WEIGHT: 0.3 kg

UNITS PER PACK: 1

USE: Attach star picket to the another

side of strainer or fence post bracket set.

Makes a 2-way or 3-way bracket set

(SEE PICS) Use the Single bracket to add to the BK130.TRI to

make a double-sided bracket




T. 02 6682 8614

BK130.TRI BK110.TRI

DESCRIPTION:

110mm and 130mm Post Bracket Set (Triangular)


BK110.TRI

WEIGHT: 0.6 kg

UNITS PER PACK: 1

USE: Easy to attach star picketto the 110mm or 130mm concrete fence post.

Used to extend the height of the fence post – great for into gullies for flood fences, or to build a skirt onto the bottom of a fence that lifts when too much debris.. Eg for flood fence.

Also good to build a feral or exclusion fence. Attach a star picket and attach the wire or mesh to the taller star pickets.




BK170.TRI

DESCRIPTION:

170mm Strainer Post Bracket Set (Triangular)


WEIGHT: 0.715 kg

UNITS PER PACK: 1

USE: Easy to attach star picket to the 170mm strainer post.

Used to extend the height of the fence post – great for into

gullies for flood fences, or to build a skirt onto the bottom of a

fence that lifts when too much debris.. Eg for flood fence.

Also good to build a feral or exclusion fence. Attach a star picket

and attach the wire or mesh to the taller star pickets.




BK170.DIR

DESCRIPTION:

170mm Strainer Threaded Rod Direction Change Bracket

SALE CODE: BK170.DIR

WEIGHT: 0.330 kg

UNITS PER PACK: 1

SPECS: Made from Hot dipped galvanised steel. Patented design for ACP posts.

USES: Use this bracket with the Adjustable End Assembly with Concrete Stay Pad system.

When you have a corner in your end assembly, this bracket holds the threaded rod in place on the side of the post that does not have holes. It will support the Threaded Rod (AC05) to the strainer post and horizontally along the ground to attach the Concrete Stay Pad (AC06) to make an Adjustable End Assembly.




BK000.CNR

DESCRIPTION: Corner Bracket

SALE CODE: BK000.CNR

WEIGHT: 0.15 kg

UNITS PER PACK: 1

USE: Various uses. Can be used to attach cattle rail or

timber rail to the concrete fence post.




T. 02 6682 8614

BK000.CRP

DESCRIPTION: Cattle Rail Positioning Bracket

SALE CODE: BK000.CRP

WEIGHT: 0.2 kg

UNITE PER PACK: 1

SPECS: Made with a hot-dipped zinc/iron alloy-coated

commercial forming steel.

No bolts or screws are supplied with these brackets. A tech

screw is all that’s required.

USES: Use the Cattle Rail Positioning Bracket is used to make

corners or T-Junctions using cattle rail with concrete posts.

This bracket fits inside standard cattle rail to make a neat

two-way junction or corner.




T. 02 6682 8614

BK110.2W

DESCRIPTION: 110mm Post Rectangular Bracket 2 Way

w Hex Nut and Bolt

SALE CODE: BK110.2W

UNITS PER PACK: 1

WEIGHT: 0.300 kg

USE: On 110mm fence post. To attach rail you must

add the round or triangular or cattle rail

attachment. This is only the rectangular part

with hex bolt and nut.




BK130.4W


w Hex Nut and Bolt

SALE CODE: BK130.4W

WEIGHT: 0.300 kg

UNITS PER PACK: 1








T. 02 6682 8614

BK130.2W


w Hex Nut and Bolt

SALE CODE: BK130.2W

WEIGHT: 0.300 kg

UNITS PER PACK: 1








T. 02 6682 8614

BK170.4W

DESCRIPTION:

170mm Strainer Rectangular 4 Way Bracket

w HEX Nut and Bolt

SALE CODE: BK170.4W

WEIGHT: 0.65 kg

UNITS PER PACK: 1

USE: On Strainer Assemblies to attach rail

to the strainer post. To attach rail you must







T. 02 6682 8614

EXTRAS / ITEM CODES

1. ITEM CODES

• IT104 - Connector

• IT108 – Brace Plate

• IT116 – Cup Head

• IT117 – Hex Head

• IT120 - Top

• IT121 – Cattle Mid

• IT124 – Cattle Rail End Cap

• IT125 – Cattle Rail Joiner

2. EXTRAS

• EX01 – Brown Colour - Fence

• EX02 – Brown Colour - Strainer

• EX03 – Epoxy Paint – Fence

• EX04 – Epoxy Paint - Strainer

IT104

DESCRIPTION: Connector Angle Bracket

SALE CODE: IT104

WEIGHT: 0.040 kg

UNITS PER PACK: 1

SPECS:

Hot Dipped Galvanised Steel Bracket is designed to fit M10 Hex Head &

Cup Head bolts

USES: Used to make a bracket set into a 2 way. Also used if the bracket

needs to be bent to an angle not 90 degrees. Simply bend the connector

bracket. It is included as part of the BK000 range, but can be ordered

alone if spares are required.

BK000 range have these as part of the components

in the Bracket sets.




IT108

DESCRIPTION: Brace Plate for Round Rail on Stay Pad

SALE CODE: IT108

WEIGHT: 0.210 kg

UNITS PER PACK: 1

SPECS: Hot Dipped Galvanised Steel Bracket. Fits Round Stay

pipe and M12 Threaded Rod.

USES: This is usually included with the Concrete Stay Pad

(AC06) to help support and guide the round stay pipe into the

stay pad and is secured with the threaded rod. (AC05).




IT116

DESCRIPTION: M10 x 25 Cup Head Bolt & Nut

SALE CODE: IT116

WEIGHT: 0.030 kg

UNITS PER PACK: 1

USE: Used when connecting the Connector Bracket (IT104) onto the BK110, BK130 & BK170 range.

The rectangular wrap bracket that fits around the post has indentations where the cup head fits. The indentations enable the 2 way brackets to be attached, as they sit sits flush against the post.




IT117

DESCRIPTION: M10 x 35 HEX Bolt & Nut

SALE CODE: IT117

WEIGHT: 0.350 kg

UNITS PER PACK: 1

USE: This is our standard size bolt that fits our brackets.




IT120

DESCRIPTION: Top Rail Fixing Bracket

ITEM CODE: IT120

SALE CODE: IT120

WEIGHT: 0.100 kg

UNITS PER PACK: 1

USE: Use this to attach cattle rail or timber to front of posts

or various other applications.

Order as BK000.TOP if required with nuts and Bolts and

connector brackets.

No nuts or bolts included with Item Codes

[ACP] Australian Concrete Posts Pty Ltd

www.ConcretePosts.com.au

Tel. 02 6682 8614

IT121

DESCRIPTION:

Cattle Rail Support Bracket

ITEM CODE: IT121

SALE CODE: IT121

WEIGHT: 0.225 kg

UNITS PER PACK: 1

USE: Use this to attach cattle rail or timber to front of posts or various other applications.

Order as BK000.CTM if required with Nuts, Bolts and Connector brackets.

No nuts or bolts included with Item Codes

[ACP] Australian Concrete Posts Pty Ltd

www.ConcretePosts.com.au

Tel. 02 6682 8614

IT124

DESCRIPTION: Cattle Rail End Cap

SALE CODE: IT124

WEIGHT: 0.100 kg

UNITS PER PACK: 1

USE: Use at the end of cattle rail for more aesthetic appeal

and to stop water getting inside the rail.




IT125

DESCRIPTION: Joiner for Cattle Rail

SALE CODE: IT125

WEIGHT: 0.418 kg

UNITS PER PACK: 1

USE: Used as a joiner for lengths of cattle rail.

Especially important when creating extended lengths of rail on

fences as it allows the rail to shift with heat and cold

environment without putting too much pressure on the posts.




EX01 & EX02

DESCRIPTION: Brown Colour to one Concrete Post

SALE CODE: EX01 (110 or 130mm fence post)

EX02 (170mm Strainer Posts)

WEIGHT: 0.00 kg

UNITS PER PACK: 1

USES:

Colour is added to the concrete batch to tint the concrete. Made to order with minimum order quantities applied. Request more info from ACP Head Office.

Standard Concrete Colour

Brown Concrete Colour




EX03 & EX04

DESCRIPTION:

Epoxy Resin Painted to both ends of one Concrete Post

SALE CODE: EX03 (110 or 130mm fence post)

EX04 (170mm Strainer Posts)

WEIGHT: 0.00 kg

UNITS PER PACK: 1

USE: Epoxy Resin is hand painted to the ends of the concrete posts.

Usually only required for specific RMS projects.

Made to order with minimum order quantities applied. Request more info from ACP Head Office.




T. 02 6682 8614

CONTACT US FOR QUOTES & ORDERS

Company: Australian Concrete Posts Pty Ltd

Email: [email protected]

Phone: 02 6682 8614

Website: www.ConcretePosts.com.au

Postal: PO Box 94 Alstonville NSW 2477

Factory: 354 Broadwater Road Dungarubba NSW 2480

PRODUCT CATALOGUE€¦ · WEIGHT: 2 kg UNITS PER PACK: 1 SPECS: 3000mm M12 Threaded Rod is supplied...

Documents

Transcript of PRODUCT CATALOGUE€¦ · WEIGHT: 2 kg UNITS PER PACK: 1 SPECS: 3000mm M12 Threaded Rod is supplied...