Product Catalogue - Theramed · or manual. 301.180.003 MaskFit™ beMode software option dedicated...
Transcript of Product Catalogue - Theramed · or manual. 301.180.003 MaskFit™ beMode software option dedicated...
the art of ventilation
Product Cataloguebellavista 1000 & Accessories
Rev. 06.15
01 | Devicesbellavista devices
02 | Options & AccessoriesSoftware options, trolleys and transportation, flow sensors, monitoring, various accessories
03 | Passive humidified Circuit SetsSingle limb, dual limb (humidified and non-humidified)
04 | Humidifier & Circuits Fisher & PaykelCircuits (reusable), humidifier (servo and manual control), accessories, spare parts
05 | Active Humidifier & Circuits BasicDual limb circuits (non-humidified), HME filters, humidifier systems (servo and manual control, Single-Patient and reusable)
06 | Nasal CPAPnCPAP generators, binasal masks, prongs, bonnets
07 | NebulizationAeroneb solo and pro nebulizer
08 | Air & Oxygen SupplyFilter and water trap, adapters, hoses
09 | Spare Parts & MaintenanceSpare parts, flow analyzer, operating instructions
01
02
03
04
05
06
07
08
09
Table of Contents
Table of Symbols
Adult
Pediatric
Neonatal
Reusable
Single-Patient
Material: Ethylene vinyl acetate
Material: Hytrel
Material: Silicone
Material: Polyethylene
(non-EU) Not available in Europe
5
Dev
ices
01
01 | Devices
Rev. 06.15Subject to change without notice.
301.100.000 bellavista 1000
bellavista 1000 ventilatorPurchase includes:
• Breathing Circuit • Test lung • Power cord • Documentation folder (including user manual)Software pre-configured for ICU use.
Ventilation: • CPAP, PCV, P-A/C, PC-SIMV, PSV, S, S/T, T, beLevel, APRV, VCV, V-A/C, VC-SIMVMonitoring: • Selection of 3 Curves: Pressure, Flow, Volume,
CO2, SpO2
• Parameters and Trending: PPeak, PMean, PPlateau, PEEP, Rate, Tinsp, Texp, I:E, VtInsp, MVInsp, Vtexp, MVexp, Leak Flow, Leak%, iO2, FlowInsp Peak, FlowExp Peak, Vtinsp/kg,
Vtexp/kg, Pulse, SpO2, inCO2, etCO2, %Spont, Tinsp/Ttot
301.100.050 bellavista 1000 NIV
bellavista 1000 ventilator configured for non-
invasive (NIV) ventilation
Purchase includes:
• 301.100.000 bellavista 1000
• 301.327.000 Advanced Oxygen Therapy
Software pre-configured for IMC:
• S, S/T, T and P-A/C Modes
• NIV patient circuits
301.100.100 bellavista 1000e
bellavista 1000e ventilator including advanced hos-
pital features such as "Advanced Oxygen Therapy"
and "ClinicalSuite".
Purchase includes:
• 301.100.000 bellavista 1000
• 301.180.000 ClinicalSuite™
Software pre-configured for ICU use.
Devices
6
Dev
ices
01
Rev. 06.15Subject to change without notice.
7
Opt
ions
&
Acc
esso
ries
02
02| Options & Accessories
Rev. 06.15Subject to change without notice.
301.180.000 ClinicalSuite™
Package of software options to upgrade bellavista
1000 to bellavista 1000e
Including:
• 301.327.000 Advanced Oxygen Therapy
• 302.128.000 Extended Pressure Range
• 301.617.000 Neonatal (10 mL)
• 301.180.005 Expert Ventilation
• 301.180.008 Expert Monitoring
• 301.180.010 Lung Mechanics
• 301.180.011 Real Time Trending
• 301.180.001 DualVent™
• 301.180.002 Day/Night™
• 301.180.003 MaskFit™
• 301.180.013 TargetVent™
• 301.180.006 ChameleonClassic™
• 301.180.007 ChameleonGreen™
• 302.124.000 Philips IntelliBridge/VueLink
Clinical Suite
bellavista 1000 bellavista 1000e
301.327.000 Advanced Oxygen Therapy
Software option which gives access to the oxygen
blender 21…100% in 1% steps.
Without this option access to oxygen blender is
limited to 5 steps: 21%, 30%, 40%, 50%, 60%, 70%
302.128.000 Extended Pressure Range
Software option for inspiratory pressure of up to
80 mbar
Without this option inspiratory pressure of up to
60 mbar is available.
Note: Only available for bellavista with serial number
103000 or higher
301.617.000 Neonatal (10 mL)
Software option for ventilation for neonatal patients:
• Patient weight >1.5 kg
• Tidal Volume 10..250 mL
Without this option: Pediatric, Adult >6 kg, >40 mL
Please order separately Dual Limb Adapter 301.522.000
Software Options
8
Opt
ions
&
Acc
esso
ries
02
Rev. 06.15Subject to change without notice.
302.267.000 Neonatal Advanced (2 mL)
Software option for ventilation for neonatal patients:
• Patient weight >0.4 kg
• Tidal Volume 2..250 mL
Without this option: Pediatric, Adult >6 kg, >40 mL
Note: Not part of ClinicalSuite 301.180.000
Please order separately Dual Limb Adapter 301.522.000
301.180.005 Expert Ventilation
Software option giving access to the maneuvers
screen and ventilation add-ons:
• HoldInsp, HoldExp and related parameters
• Manual breath
• AutoPEEP, NIF, P0.1, VTrapped
• ATC automatic tube compensation
• Configurable sigh
301.180.008 Expert Monitoring
Software option with additional monitoring:
• Up to 8 curves or loops per screen
(without this option only 3 curves)
• Expert Monitoring Screen
Spontaneous breathing monitoring parameters:
• RateSpont, TInsp Support
• %Spont1h, %Spont8h
• MVInsp Spont, MVExp Spont
• RSBI
• WOB (Work of Breathing), PTP
(Pressure Time Product), P0.1 (online)
301.180.010 Lung Mechanics
Software option with additional monitoring:
• Up to 8 curves or loops per screen
(without this option only curves)
• Ability to display loops: Pressure/Volume,
Volume/Flow, Pressure/Flow
• Reference loop, overlay loop
Lung mechanics monitoring parameters:
• RInsp, RExp
• CStat, CStat/kg CDyn, CDyn/kg, C20/CDyn
Without this option only curves can be displayed
9
Opt
ions
&
Acc
esso
ries
02
02| Options & Accessories
Rev. 06.15Subject to change without notice.
301.180.011 Real Time Trending
Software option to store, display and export real-
time curves for up to 2 weeks:
• Pressure, flow, volume
• Capnography curve, cardio pleth curve
Without this option only monitoring parameters are
stored into trending once per breath.
301.180.001 DualVent™
beMode software option which enables bellavista
to automatically switch between freely selectable
spontaneous and mandatory breathing modes follow-
ing the activity of the patient.
301.180.002 Day/Night™
beMode software option which enables bellavista
to switch between two freely selectable modes or
mode settings. The switching can be time controlled
or manual.
301.180.003 MaskFit™
beMode software option dedicated to starting
non-invasive ventilation (NIV). Audio-visual feed-
back can be provided to assist the patient adaptation
to breathing on the mask.
301.180.013 TargetVent™
beMode software option dedicated to pressure
regulated-volume controlled ventilation (PRVC,
target volume). It allows PRVC with invasive and
non-invasive ventilation.
10
Opt
ions
&
Acc
esso
ries
02
Rev. 06.15Subject to change without notice.
301.180.006 ChameleonClassic™
Software option giving access to the Chameleon-
Classic screen
301.180.007 ChameleonGreen
Software option giving access to the Chameleon-
Green screen
302.124.000 Phillips IntelliBridge/VueLink
Software option to connect bellavista to Philips
monitors via the following protocols:
• Philips VueLink "Ventilator" open interface
• Philips IntelliBridge open interface
Please order separately (see data sheet for details):
• 302.079.000 External device interface adapter
blue (D-Sub 9M)
• Philips equipment
301.180.014 AVM Adaptive Ventilation Mode
AVM is a safe and smart ventilation mode that reduces
user interaction, ventilator settings to a minimum
and therefore the workload.
11
Opt
ions
&
Acc
esso
ries
02
02| Options & Accessories
Rev. 06.15Subject to change without notice.
301.180.015 Integrated Pneumatic Nebulizer(Factory installed only)
Option for Pneumatic medication nebulization.
Please order separately:
• 302.322.000 Pneumatic Nebulizer Kit 15 mm M/F
(Single-Patient)
• 302.321.000 Pneumatic Nebulizer Kit 22 mm M/F
(Single-Patient)
301.180.016 Auxiliary Pressure (Factory installed only)
Additional pressure measurement port.
302.645.000 VGA Interface (Factory installed only)
VGA interface to connect bellavista to any external
monitor or projector.
Note: For demonstration & service purpose only
Hardware Options
12
Opt
ions
&
Acc
esso
ries
02
Rev. 06.15Subject to change without notice.
301.105.000 bellavista Trolley
This ergonomic trolley was exclusively designed for
bellavista. It is made of aluminium and has convenient
storage and hanging options.
This set includes:
• Base with wheels
• Stand, platform, handle, DIN-bar (25 x 10 mm)
• Screws and tools
Available accessories:
• 301.106.000 Support arm
• 301.551.000 Gas cylinder holder
• 302.528.000 Basket/drawer for bellavista Trolley
302.528.000 Basket/drawer for bellavista Trolley
Basket/drawer for bellavista Trolley 301.105.000
Note: Does not include bellavista Trolley
301.106.000 Support Arm for Trolley
The double joint system fulfills highest demands and
allows an easy and fast handling. The support arm is
very robust and can be adjusted in any position.
This set includes:
• Support arm
• Swivel circuit bracket
• Circuit and cable clips
302.307.000 Support Arm ECO for Trolley (non-EU)
The double joint system fulfills highest demands and
allows an easy and fast handling. The support arm is
very robust and can be adjusted in any position.
This set includes:
• Support arm
• Swivel circuit bracket
• Circuit and cable clips
Trolleys & Transportation
13
Opt
ions
&
Acc
esso
ries
02
02| Options & Accessories
Rev. 06.15Subject to change without notice.
301.551.000 Gas Cylinder Holder (5 L) for Trolley
This add-on to the bellavista Trolley allows the con-
venient fixation up to 5 L gas cylinder.
This set includes:
• Holder
• Mounting screws
Note: Fits only with bellavista Trolley (301.105.000)
301.620.000 Humidifier Bracket
Fits to bellavista Trolley or standard rail.
301.981.000 Rail Mount Support
Mount bellavista to any standard rail capable of
carrying 15 kg.
Resulting torque at the rail up to 30 Nm
301.982.000 Rail Mount Bracket for Support Arm
Allows the fitting of support arm (301.106.000) to any
standard rail.
301.472.000 Carrying Bag bellavista
The carrying bag has been especially designed for
the comfortable and secure transport of bellavista.
Classy, modern and custom made for the device.
It is the optimal accompaniment for the secure
transport of bellavista and offers enough space for
accessories.
14
Opt
ions
&
Acc
esso
ries
02
Rev. 06.15Subject to change without notice.
301.549.000 Proximal Flow Sensor (Adult/Pediatric, Reusable)
Adult, Reusable (cold sterilizable), 1 piece
Range 0…±180 L/min
Device connection 15M
Patient connection 15M
301.549.010 Adult, Reusable (cold sterilizable) (pack/10)
301.328.010 Proximal Flow Sensor(Adult/Pediatric, Single-Patient)
Adult, Single-Patient (pack/10)
Deadspace 10.3 mL
Range 0…±180 L/min
Device connection 22M / 15F
Patient connection 15M
301.470.010 Proximal Flow Sensor (Pediatric/Neonatal, Single-Patient)
Pediatric/Neonatal, Single-Patient (pack/10)
Deadspace 1.3 mL
Range 0…±30 L/min
Device connection 15M
Patient connection 15F
301.113.000 Diagnostics Package Pulse Oximetry
The diagnostic package pulse oximetry measures
partial blood oxygen saturation (SpO2), which provides
valuable information detailing the patient's condi-
tion and quality of ventilation and enables a more
reliable diagnosis and higher quality ventilation.
Note: Not compatible with neonatal option.
302.324.000 Diagnostics Package Pulse Oximetry Neonatal
The diagnostic package pulse oximetry neonatal
measures the SpO2 (partial blood oxygen) saturation,
which provides valuable information detailing the
neonatal condition and quality of ventilation and
enables a more reliable diagnosis and higher quality
ventilation.
Note: Not compatible with adult or pediatric option.
302.567.000 FlexiWraps
The flexiwraps are needed to fix the reusable SpO2
sensor on the neonatal foot. Never use abrasive
cloth or cleaning agent.
Sensors & Monitoring
15
Opt
ions
&
Acc
esso
ries
02
02| Options & Accessories
Rev. 06.15Subject to change without notice.
301.114.000 Diagnostics Package Capnography Mainstream
The diagnostic package capnography mainstream
measures the proximal CO2 concentration, which
provides valuable information detailing the patient's
condition and quality of ventilation and enables a
more reliable diagnosis and therapy.
(including airway adapter 300.160.025)
301.476.050 Adapter piece for Airway Adapter (Pediatric, Single-Patient)
Adapter piece for:
301.475.010 Airway adapter pediatric (pack/50)
300.160.025 Airway Adapter (Adult, Single-Patient)
Airway adapter for diagnostics package capnogra-
phy mainstream. Adult, Single-Patient (pack/25),
Dead space 6 mL.
301.475.010 Airway Adapter (Pediatric, Single-Patient)
Airway adapter for diagnostics package capnogra-
phy mainstream. Pediatric, Single-Patient (pack/10),
Dead space 1 mL.
Please order separately:
• 301.476.050 Adapter piece
302.323.000 Diagnostics Package Capnography Sidestream
The diagnostic package capnography sidestream
measures the proximal CO2 concentration, which
provides valuable information detailing the patient's
condition and quality of ventilation and enables a
more reliable diagnosis and therapy.
This set includes:
• 302.389.020 Sidestream airway adapter
• 302.394.000 Sidestream Bracket
• 302.395.000 Clamp Adapter for sidestream
CO2 Sensor
16
Opt
ions
&
Acc
esso
ries
02
Rev. 06.15Subject to change without notice.
302.389.020 Sidestream Airway Adapter Set(Adult/Pediatric, Single-Patient)
Sidestream airway adapter set for the diagnostic
package capnography sidestream. Length 2.0 m.
(Pack/20)
302.390.020 Sidestream Airway Adapter Set(Neonatal, Single-Patient, Pack/20)
Nomoline airway adapter set for the diagnostic
package capnography sidestream. Length 2.0 m.
(Pack/20)
302.394.000 Sidestream Bracket
Mounts the diagnostic package capnography side-
stream on the standard rail of the bellavista Trolley.
Please order separately:
• 302.395.000 Clamp Adapter
302.395.000 Clamp Adapter for Sidestream CO2 Sensor
Clamp adapter for easy installation of the diagnostic
package capnography sidestream.
17
Opt
ions
&
Acc
esso
ries
02
02| Options & Accessories
Rev. 06.15Subject to change without notice.
302.529.000 Integrated Exhalation Valve (Reusable)
The integrated expiration valve allows the use of dual
limb breathing circuits with bellavista. It is mounted
with four screws into the bellavista bay and carries a
reusable expiration valve.
Replaces dual limb adapter and corresponding exha-
lation valves. Can be used for retrofitting existing
bellavista units, no other hard- or software required.
This set includes:
• 302.526.000 Membrane
• 302.679.000 Exhalation valve cassette
• 302.527.000 Control tube
302.526.000 Membrane for Integrated Exhalation Valve (Reusable, Pack/5)
Replacement membrane for integrated exhalation
valve. (Reusable, Pack/5)
302.679.000 Exhalation valve cassette (Reusable)
Additional exhalation valve cassette
302.709.000 Water trap for integrated exhalation valve (Reusable)
302.705.000 O-Ring for integrated exhalation valve (Reusable)
302.527.000 Control tube for Integrated Exhalation Valve (Reusable)
Control tube for integrated exhalation valve
(Reusable)
Exhalation Valves & Filters
18
Opt
ions
&
Acc
esso
ries
02
Rev. 06.15Subject to change without notice.
301.522.000 Dual Limb Adapter
This adapter allows the use of dual limb breathing
circuits with bellavista 1000. It is mounted with four
screws into the bellavista bay and carries a reusable
expiration valve.
This set includes:
• 301.516.000 Expiration valve mount
• 301.518.000 Expiration valve
• 301.517.000 Expiration valve adapter
• 302.290.000 L-Connector (2x)
• 301.519.000 Silicone tube
• 301.521.000 Screws & tool set
• 301.520.000 Manual
301.518.000 Expiration Valve (Reusable)
Patient connection: 22M/15F
Device connection: 22M/15F
Exhaust connection: none (to ambient)
Please order separately:
• 301.519.000 silicone tube 250 mm
302.231.000 Expiration Valve (Single-Patient)
Patient connection: 22M/15F
Device connection: 22M/15F
Including 301.519.000 silicone tube 250 mm
301.523.000 Membrane for external exhalation valve (Reusable, GaleMed)
Expiration valve membrane
301.519.000 Silicone Tube 250 mm for Expiration Valve (Reusable)
301.110.000 DC-Input / Low Voltage Connector
24 V supply connector (without cable)
19
Opt
ions
&
Acc
esso
ries
02
02| Options & Accessories
Rev. 06.15Subject to change without notice.
301.115.000 Nurse Call Connector
Nurse call connector (without cable)
302.079.000 External Device Interface Adapter blue (D-Sub 9M)
Connection to Philips IntelliBridge/VueLink
20
Opt
ions
&
Acc
esso
ries
02
Rev. 06.15Subject to change without notice.
302.303.000 Inlet Filter Starter Kit H14 HEPA (Housing, H14 HEPA cartridge)
Special filter set to protect device & patient against:
• Particles
• Bacteria
• Viruses
• Radioactive Particles
• Aerosols
302.504.000 Inlet Filter Set H14 HEPA (H14 HEPA cartridges, Pack/4)
Filter cartridge set for 1 year (in normal conditions).
302.502.000 Inlet Filter Starter Kit F9 (Housing, F9 Fine particle cartridge)
Special filter set for operation in rough environmental
situations.
• Cleans the incoming air
• Removes all dust particles
• for a long and safe operation in all conditions
302.503.000 Inlet Filter Set F9 (F9 Fine particle cartridges, Pack/4)
Filter cartridge set for 1 year (in normal conditions).
301.685.550 Bacteria Filter (Reusable)
Filter efficiency BFE>99.9999 %
VFE>99.9999 %
Dead space 95 mL
Resistance <2.5 mbar at 60 L/min
Dimension L 55 x W 55 x H 55 mm
301.168.000 Bacteria Filter (Single-Patient)
Very low resistance
Filters & Accessories
21
Opt
ions
&
Acc
esso
ries
02
02| Options & Accessories
Rev. 06.15Subject to change without notice.
302.291.000 Flex Tube
Flex tube 15 cm, Adult, Reusable, Silicone
302.290.000 L-Connector
Patient connection: 22F
Device connection: 22M/15F
22
Opt
ions
&
Acc
esso
ries
02
Rev. 06.15Subject to change without notice.
FaceFit NIV Mask (Single-Patient) (non-EU)
301.815.000
301.815.100
301.815.200
Small
Medium
Large
Non-Vented Full Face Mask (Reusable) (non-EU)
301.817.000
301.817.100
301.817.200
Small
Medium
Large
Masks
23
Cir
cuit
s H
ME
hum
idif
ied
03
03 | Passive humidified Circuit Sets
Rev. 06.15Subject to change without notice.
300.941.000 Breathing Circuit A (Adult, Single-Patient, Silicone)
For non-invasive ventilation with vented mask.
This set includes:
• Tube Ø22 mm, 1.8 m
• Inner pressure tubing
301.167.000 Breathing Circuit C-800 (Adult, Single-Patient, Polyethylene)
For invasive and non-invasive (non-vented mask)
ventilation.
This set includes:
• Tube Ø22 mm, 1.8 m
• Patient-proximal expiratory valve
• 3 x clip
301.531.000 Breathing Circuit C-850 (Adult, Reusable, Silicone)
For invasive and non-invasive (non-vented mask)
ventilation.
This set includes:
• Tube Ø22 mm, 1.8 m
• Tube Ø22 mm, 0.15 m
• Patient-proximal expiratory valve
• 3 x clip
301.094.000 Breathing Circuit D-800 (Adult, Single-Patient, Polyethylene)
For invasive and non-invasive (non-vented mask)
ventilation.
This set includes:
• Tube Ø22 mm, 1.8 m
• Proximal flow sensor
• Patient-proximal expiratory valve
• 3 x clip
301.670.000 Breathing Circuit E-800 (Adult, Single-Patient, Polyethylene)
Flextube dual limb breathing circuit
This set includes:
• 2 x tube Ø22 mm, 1.6 m
• Y-piece
Please order separately:
• 301.549.000 Proximal flow sensor
Circuits Single Limb
Circuits Dual Limb (Non-Humidified)
24
Cir
cuit
s H
ME
hum
idif
ied
03
Rev. 06.15Subject to change without notice.
301.681.055 Breathing Circuit E (Adult, Reusable, Silicone) (non-EU)
Adult 22 mm, Reusable, Silicone
• 2 x tube Ø22 mm, 1.5 m
• Y-Piece
Please order separately:
• 301.549.000 Proximal flow sensor
301.682.055 Breathing Circuit E (Pediatric, Reusable, Silicone) (non-EU)
Pediatric 15 mm, Reusable, Silicone
• 2 x tube Ø15 mm, 1.5 m
• Ventilator connection tube Ø15 mm, 0.6 m
• Y-Piece
Please order separately:
• 301.470.010 Proximal flow sensor
301.683.055 Breathing Circuit E (Neonatal, Reusable, Silicone) (non-EU)
Neonatal 10 mm, Reusable, Silicone
• 2 x tube Ø10 mm, 1.3 m
• Ventilator connection tube Ø10 mm, 0.6 m
• Y-Piece
Please order separately:
• 301.470.010 Proximal flow sensor
301.681.000 Breathing Circuit E (Adult, Single-Patient, EVA) (non-EU)
Breathing circuit E (Adult, Single-Patient, EVA)
• 2 x tube Ø22 mm, 1.5 m
• Ventilator connection tube Ø22 mm, 0.6 m
• Y-Piece
Please order separately:
• 301.549.000 Proximal flow sensor
301.682.000 Breathing Circuit E (Pediatric, Single-Patient, EVA) (non-EU)
Breathing circuit E (Pediatric, Single-Patient, EVA)
• 2 x tube Ø15 mm, 1.5 m
• Ventilator connection tube Ø15 mm, 0.6 m
• Y-piece
Please order separately:
• 301.470.010 Proximal flow sensor
301.683.000 Breathing Circuit E (Neonatal, Single-Patient, EVA) (non-EU)
Breathing circuit E (Neonatal, Single-Patient, EVA)
• 2 x tube Ø10 mm, 1.3 m
• Ventilator connection tube Ø10 mm, 0.6 m
• Y-piece
Please order separately:
• 301.470.010 Proximal flow sensor
Dual Limb Circuits (HME Humidified)
25
Hum
idif
ier
&
Cir
cuit
s F&
P
04
04 | Humidifier & Circuits Fisher & Paykel
Rev. 06.15Subject to change without notice.
Respiratory Humidifier Fisher & Paykel MR850 (Adult, Pediatric, Neonatal)
301.850.004
301.850.005
301.850.006
For invasive ventilation, non-invasive ventilation,
humidified high flow therapy, oxygen therapy.
For use with heated wire breathing circuits:
• Clinically based alarm system
• Automatic standby
Please order separately:
• Heater wire adapter*
• 301.984.000 Temperature probe
• Humidification chamber
• Circuit
*for Single-Patient circuits 301.800.000,
for Reusable circuits 301.802.000
MR850-ARU: (EN, PO, RU, 230VAC, Euro plug)
MR850-AEK: (EN, 230VAC, UK plug)
MR850-JSU: (EN, ES, PT, 115VAC, US plug)
301.809.000 Humidification Chamber MR370(Adult, Reusable)
Inlet/outlet 22F/22M
Compressible volume 700 mL (empty)
420 mL (full)
Water capacity 280 mL
Heat conduction diameter 12.2 cm
Peak flow 180 L/min
Compliance 0.6-0.8 mL/cm H2O
Material Polysulfone
301.808.000 Humidification Chamber MR340 (Pediatric, Reusable)
Inlet/outlet 15F/22M
Compressible volume 360 mL (empty)
130 mL (full)
Water capacity 230 mL
Heat conduction diameter 12.2 cm
Peak flow 70 L/min
Compliance 0.15-0.35 mL/cm H2O
Material Polysulfone
Humidifier (Servo Control)
26
Hum
idif
ier
&
Cir
cuit
s F&
P
04
Rev. 06.15Subject to change without notice.
301.803.000 Breathing Circuit Kit 900MR761 (Adult, Reusable, Hytrel)
This set includes:
• Inspiratory heated tube Ø22 mm, 1.5 m
• 2 x Expiratory tube Ø22 mm, 1.7 m
• Ventilator connection tube Ø22 mm, 0.6 m
• Water trap
• Y-piece & 2 x adapters
• Draw wire
• Lemo style heater wire connection
Please order separately:
• 301.549.000 Proximal flow sensor
• 301.802.000 Heater wire adapter
• 301.984.000 Temperature probe
• Humidifier & water chamber
301.804.000 Breathing Circuit Kit 900MR749 (Pediatric, Reusable, Silicone)
This set includes:
• Inspiratory heated tube Ø15 mm, 1.5 m
• 2 x Expiratory tube Ø15 mm, 1.7 m
• Ventilator connection tube Ø15 mm, 0.6 m
• Water trap
• Y-piece & 2 x Adapters
• Draw wire
• Lemo style heater wire connection
Please order separately:
• 301.470.010 Proximal flow sensor
• 301.802.000 Heater wire adapter
• 301.984.000 Temperature probe
• Humidifier & water chamber
301.805.000 Breathing Circuit Kit 900MR750 (Neonatal, Reusable)
This set includes:
• Inspiratory heated tube Ø10 mm, 1.5 m
• 2 x Expiratory tube Ø10 mm
• Ventilator connection tube Ø10 mm, 0.6 m
• Water trap
• Y-piece & 2 x Adapters
• Draw wire
• Lemo style heater wire connection
Please order separately:
• 301.470.010 Proximal flow sensor
• 301.802.000 Heater wire adapter
• 301.984.000 Temperature probe
• Humidifier & water chamber
Circuits (Inspiratory Heated)
27
Hum
idif
ier
&
Cir
cuit
s F&
P
04
04 | Humidifier & Circuits Fisher & Paykel
Rev. 06.15Subject to change without notice.
301.809.000 Humidification Chamber MR370(Adult, Reusable)
Inlet/outlet 22F/22M
Compressible volume 700 mL (empty)
420 mL (full)
Water capacity 280 mL
Heat conduction diameter 12.2 cm
Peak flow 180 L/min
Compliance 0.6-0.8 mL/cm H2O
Material Polysulfone
301.808.000 Humidification Chamber MR340 (Pediatric, Reusable)
Inlet/outlet 15F/22M
Compressible volume 360 mL (empty)
130 mL (full)
Water capacity 230 mL
Heat conduction diameter 12.2 cm
Peak flow 70 L/min
Compliance 0.15-0.35 mL/cm H2O
Material Polysulfone
Humidifier (Manual Control)
28
Hum
idif
ier
&
Cir
cuit
s F&
P
04
Rev. 06.15Subject to change without notice.
301.800.000 Inspiratory Heater Wire Adapter for Cloverleaf Style Single-Patient Circuits 900MR806
For use with the MR850 humidifier when paired with
an inspiratory heated, Single-Patient circuit.
301.802.000 Inspiratory Heater Wire Adapter for Lemo Style Reusable Circuits 900MR858
For use with the MR850 humidifier when paired with
an inspiratory heated, reusable circuit.
301.984.000 Temperature Probe 900MR869 (used with MR850 & Breathing Circuits up to 1.5 m)
Use with reusable inspiratory tubing approximately
up to 1.5 m (60") long .
Compatible with MR850 & HC550 humidifiers.
301.620.000 Humidifier Bracket
Fits to bellavista Trolley or standard rail.
301.807.000 Heater Wire 900MR751 (Adult, Reusable)
• Heater wire assembly
• Use with reusable inspiratory tubing
approximately 1.5 m (60") long
• Compatible with MR850 and MR730
humidifiers
• Lemo style heater wire connection
301.806.000 Heater Wire 900MR754 (Pediatric, Reusable)
• Flows ≥ 4 L/min
• Use with reusable inspiratory tubing
approximately 1.1 m (43") long
• Compatible with MR850 & MR700 humidifiers
• Lemo style heater wire connection
Fisher & Paykel Accessories
Fisher & Paykel Spare Parts
29
Hum
idif
ier
&
Cir
cuit
s B
asic
05
05 | Active Humidifier & Circuits Basic
Rev. 06.15Subject to change without notice.
Respiratory Humidifier Kit (Servo Control) (non-EU)
301.680.550
301.680.551
This set includes:
• Humidifier
• Temperature probe
• Inspiratory heater wire adapter (lemo style)
for reusable breathing circuits.
Dimensions H 135 x D 170 x W 156 mm
Weight 2.8 kg
Power Heater wire: 60 W max
Heater plate: 150 W, 110°C max
Overheat Cutoff : 118 ±6°C
Controls Airway: 31…40°C
Chamber: 31… 40°C
Alarms ±2°C from set Airway temp
±4°C from set Chamber temp
Please order separately:
• Water chamber
• 301.687.500 Heater wire adapter*
*necessary only for Single-Patient circuits
Servo control 220VAC, 50/60Hz, Euro plug
Servo control, 110VAC, 50/60Hz, US plug
301.684.550 Humidification Chamber (Auto-Fill, Reusable) (non-EU)
Inlet/outlet 22M/22M
Compressible volume 315 mL (empty)
175 mL (full)
Water capacity 140 mL
Heat conduction diameter 12.2 cm
Peak flow 180 L/min
Resistance <0.15 mbar at 30 L/min
Compliance 0.32 mL/mbar
301.684.500 Humidification Chamber (Auto-Fill, Single-Patient) (non-EU)
Inlet/outlet 22M/22M
Compressible volume 325 mL (empty)
175 mL (full)
Water capacity 150 mL
Heat conduction diameter 12.2 cm
Peak flow 180 L/min
Resistance <0.8 mbar at 30 L/min
Compliance 0.32 mL/mbar
IV line 1.3 m
Basic Humidifier System (Servo Control)
30
Hum
idif
ier
&
Cir
cuit
s B
asic
05
Rev. 06.15Subject to change without notice.
301.684.350 Humidification Chamber (Manual-Fill, Reusable, Large) (non-EU)
Inlet/outlet 22F/22M
Compressible volume 420…700 mL (empty)
420 mL (full)
Water capacity 280 mL
Heat conduction diameter 12.2 cm
Peak flow 180 L/min
Resistance <0.60 mbar at 30 L/min
Compliance 0.6…0.8 mL/mbar
301.684.351 Humidification Chamber (Manual-Fill, Reusable) (non-EU)
Inlet/outlet 22M/22M
Compressible volume 315 mL (empty)
175 mL (full)
Water capacity 140 mL
Heat conduction diameter 12.2 cm
Peak flow 180 L/min
Resistance <0.15 mbar at 30 L/min
Compliance 0.32 mL/mbar
31
Hum
idif
ier
&
Cir
cuit
s B
asic
05
05 | Active Humidifier & Circuits Basic
Rev. 06.15Subject to change without notice.
301.681.555 Breathing Circuit E (Adult, Reusable, Silicone) (non-EU)
This set includes:
• Inspiratory heated tube Ø22 mm, 1.5 m
• Ventilator connection tube Ø22 mm, 0.6 m
• 2 x Expiratory tube Ø22 mm, 0.75 m
• Water trap
• Y-Piece
• Lemo style heater wire connection
Please order separately:
• 301.549.000 Proximal flow sensor
301.682.555 Breathing Circuit E (Pediatric, Reusable, Silicone) (non-EU)
This set includes:
• Inspiratory heated tube Ø15 mm, 1.2 m
• Ventilator connection tube Ø15 mm, 0.6 m
• 2 x Expiratory tube Ø15 mm, 0.6 m
• Water trap
• Y-Piece
• Lemo style heater wire connection
Please order separately:
• 301.470.010 Proximal flow sensor
301.683.555 Breathing Circuit E (Neonatal, Reusable, Silicone) (non-EU)
This set includes:
• Inspiratory heated tube Ø10 mm, 1.3 m
• Ventilator connection tube Ø10 mm, 0.6 m
• 2 x Expiratory tube Ø10 mm, 0.6 m
• Water trap
• Y-Piece
• Lemo style heater wire connection
Please order separately:
• 301.470.010 Proximal flow sensor
301.681.500 Breathing Circuit E (Adult, Single-Patient) (non-EU)
This set includes:
• Inspiratory heated tube Ø22 mm, 1.5 m
• 2 x Expiratory tube Ø22 mm, 0.75 m
• Ventilator connection tube Ø22 mm, 0.6 m
• Water trap
• Y-Piece
• Cloverleaf style heater wire connection
Please order separately:
• 301.549.000 Proximal flow sensor
Basic Circuits (Inspiratory-Heated)
32
Hum
idif
ier
&
Cir
cuit
s B
asic
05
Rev. 06.15Subject to change without notice.
301.682.500 Breathing Circuit E (Pediatric, Single-Patient) (non-EU)
This set includes:
• Inspiratory heated tube Ø15 mm, 1.3 m
• Ventilator connection tube Ø15 mm, 0.6 m
• 2 x Expiratory tube Ø15 mm, 0.6 m
• Water trap
• Y-Piece
• Cloverleaf style heater wire connection
Please order separately:
• 301.470.010 Proximal flow sensor
301.683.500 Breathing Circuit E (Neonatal, Single-Patient) (non-EU)
This set includes:
• Inspiratory heated tube Ø10 mm, 1.3 m
• Ventilator connection tube Ø10 mm, 0.6 m
• 2 x Expiratory tube Ø10 mm, 0.6 m
• Water trap
• Y-Piece
• Cloverleaf style heater wire connection
Please order separately:
• 301.470.010 Proximal flow sensor
33
Hum
idif
ier
&
Cir
cuit
s B
asic
05
05 | Active Humidifier & Circuits Basic
Rev. 06.15Subject to change without notice.
Respiratory Humidifier Kit (Manual Control) (non-EU)
301.686.300
301.686.301
This set includes:
• Humidifier
Dimensions H 135 x D 170 x W 156 mm
Weight 1.3 kg
Power Heater plate: 85 W max
Overheat Power cutout at 95 °C
Controls Steps 1…9 45°C to 75°C
Please order separately:
• Water chamber
Manual control, 220VAC, 50/60Hz, Euro plug
Manual control, 110VAC, 50/60Hz, US plug
301.684.550 Humidification Chamber (Auto-Fill, Reusable) (non-EU)
Inlet/outlet 22M/22M
Compressible volume 315 mL (empty)
175 mL (full)
Water capacity 140 mL
Heat conduction diameter 12.2 cm
Peak flow 180 L/min
Resistance <0.15 mbar at 30 L/min
Compliance 0.32 mL/mbar
301.684.500 Humidification Chamber (Auto-Fill, Single-Patient) (non-EU)
Inlet/outlet 22M/22M
Compressible volume 325 mL (empty)
175 mL (full)
Water capacity 150 mL
Heat conduction diameter 12.2 cm
Peak flow 180 L/min
Resistance <0.8 mbar at 30 L/min
Compliance 0.32 mL/mbar
IV line 1.3 m
301.684.350 Humidification Chamber (Manual-Fill, Reusable, Large) (non-EU)
Inlet/outlet 22F/22M
Compressible volume 420…700 mL (empty)
420 mL (full)
Water capacity 280 mL
Heat conduction diameter 12.2 cm
Peak flow 180 L/min
Resistance <0.60 mbar at 30 L/min
Compliance 0.6…0.8 mL/mbar
Basic Humidifier System (Manual Control)
34
Hum
idif
ier
&
Cir
cuit
s B
asic
05
Rev. 06.15Subject to change without notice.
301.684.351 Humidification Chamber (Manual-Fill, Reusable) (non-EU)
Inlet/outlet 22M/22M
Compressible volume 315 mL (empty)
175 mL (full)
Water capacity 140 mL
Heat conduction diameter 12.2 cm
Peak flow 180 L/min
Resistance <0.15 mbar at 30 L/min
Compliance 0.32 mL/mbar
301.684.300 Humidification Chamber (Manual-Fill, Single-Patient) (non-EU)
Inlet/outlet 22M/22M
Compressible volume 325 mL (empty)
175 mL (full)
Water capacity 150 mL
Heat conduction diameter 12.2 cm
Peak flow 180 L/min
Resistance <0.6 mbar at 30 L/min
Compliance 0.32 mL/mbar
35
Hum
idif
ier
&
Cir
cuit
s B
asic
05
05 | Active Humidifier & Circuits Basic
Rev. 06.15Subject to change without notice.
301.681.355 Breathing Circuit E (Adult, Reusable, Silicone) (non-EU)
This set includes:
• Inspiratory heated tube Ø15 mm, 1.2 m
• Ventilator connection tube Ø15 mm, 0.6 m
• 2 x Expiratory tube Ø15 mm, 0.6 m
• Water trap
• Y-Piece
• Lemo style heater wire connection
Please order separately:
• 301.470.010 Proximal flow sensor
301.682.355 Breathing Circuit E (Pediatric, Reusable, Silicone) (non-EU)
This set includes:
• Inspiratory heated tube Ø10 mm, 1.3 m
• Ventilator connection tube Ø10 mm, 0.6 m
• 2 x Expiratory tube Ø10 mm, 0.6 m
• Water trap
• Y-Piece
• Lemo style heater wire connection
Please order separately:
• 301.470.010 Proximal flow sensor
301.683.355 Breathing Circuit E (Neonatal, Reusable, Silicone) (non-EU)
This set includes:
• Inspiratory heated tube Ø22 mm, 1.5 m
• 2 x Expiratory tube Ø22 mm, 0.75 m
• Ventilator connection tube Ø22 mm, 0.6 m
• Water trap
• Y-Piece
• Cloverleaf style heater wire connection
Please order separately:
• 301.549.000 Proximal flow sensor
301.681.300 Breathing Circuit E (Adult, Single-Patient) (non-EU)
This set includes:
• 4 x Tube Ø22 mm, 0.75 m
• Ventilator connection tube Ø22 mm, 0.6 m
• 2 x water trap
• Y-Piece
Please order separately:
• 301.549.000 Proximal flow sensor
Basic Circuits (Unheated)
36
Hum
idif
ier
&
Cir
cuit
s B
asic
05
Rev. 06.15Subject to change without notice.
301.620.000 Humidifier Bracket
Fits to bellavista Trolley or standard rail.
301.685.550 Bacteria Filter (Reusable) (non-EU)
Filter efficiency BFE>99.9999 %
VFE>99.9999 %
Dead space 95 mL
Resistance <2.5 mbar at 60 L/min
Dimension L 55 x W 55 x H 55 mm
301.685.500 Bacteria Filter (Single-Patient) (non-EU)
Filter Efficiency BFE>99.99 %
VFE>99.99 %
Dead Space 45 mL
Resistance <2.25 mbar at 60 L/min
Dimension L 55 x W 55 x H 55 mm
Basic Accessories
37
Hum
idif
ier
&
Cir
cuit
s B
asic
05
05 | Active Humidifier & Circuits Basic
Rev. 06.15Subject to change without notice.
301.687.550 Heater Wire Adapter (for reusable Circuits) (non-EU)
Lemo Style for reusable breathing circuits, Inspira-
tory-Heated.
Note: Used as spare part only
301.687.500 Heater Wire Adapter (for Single-Patient circuits) (non-EU)
Cloverleaf style, for Single-Patient breathing circuits,
Inspiratory-Heated.
Note: Used as spare part only
301.688.550 Temperature Probe (non-EU)
Temperature probe (1.5 m)
Note: Used as spare part only
301.689.550 Heater Wire (Adult) (non-EU)
Lemo style heater wire connection, 1.5 m.
Note: Used as spare part only
301.689.551 Heater Wire (Pediatric/Neonatal) (non-EU)
Lemo style heater wire connection, 1.3 m.
Note: Used as spare part only
Basic Spare Parts
38
Hum
idif
ier
&
Cir
cuit
s B
asic
05
Rev. 06.15Subject to change without notice.
39
Nas
al C
PAP
06
06 | Nasal CPAP
Rev. 06.15Subject to change without notice.
302.739.000 Medijet nCPAP Generator (Single use, Pack/20)
Use only with original Masks and Prongs.
Nasal Prongs
The prongs can only be used with the Medijet driver.
Single Use, pack/10, Material: Silicone
302.741.000 Nasal prong micro, Nostril AD: 3 mm
302.742.000 Nasal prong small,Nostril AD: 3.5 mm
302.743.000 Nasal prong medium, Nostril AD: 4.1 mm
302.744.000 Nasal prong large, Nostril AD: 4.75 mm
302.745.000 Nasal prong x-large, Nostril AD: 5.5 mm
302.746.000 Nasal prong wide medium, Nostril AD: 3.7 mm
302.747.000 Nasal prong wide large, Nostril AD: 5 mm
Nasal Masks
Single Use, pack/10, Material: Silicone
302.748.000 Mask small, Mask width nose: 18.5 mm
302.749.000 Mask medium, Mask width nose: 21.0 mm
302.772.000 Mask large, Mask width nose: 23.0 mm
Bonnets
Bonnets for perfect fixation to prongs or masks.
Single Use, pack/10, including strips
Material: 95 % Polyamid, 5 % Elastan
302.750.000
whiteBonnet x-small
Head circumference 19 –21 cm
302.751.000 yellow
Bonnet small
Head circumference 21 –23 cm
302.752.000
redBonnet medium
Head circumference 23 –25.5 cm
302.753.000
blueBonnet large
Head circumference 25.5 –28 cm
302.754.000
orangeBonnet x-large
Head circumference 28 –30 cm
302.755.000
greenBonnet xx-large
Head circumference 30 –33 cm
302.756.000
whiteBonnet xxx-large
Head circumference 33 –36 cm
Nasal CPAP
40
Nas
al C
PAP
06
Rev. 06.15Subject to change without notice.
Strips for bonnets
302.760.000 Strip 13 cm (Single use, Pack/10)
302.766.000 Strip 15 cm (Single use, Pack/10)
302.767.000 Strip 18cm (Single use, Pack/10)
302.768.000 Strip 20cm (Single use, Pack/10)
Circuits (Pack/10)
302.758.000 Single limb circuit, heated with pressure line
(Pack/10)
302.759.000 Single limb circuit, heated with pressure line and
chamber (Pack/10)
302.757.000 Tube for Y-Piece, pressure line and silicone adapter
(Pack/10)
Medijet
302.770.000 Medijet blue, 60° angle (Autoclavable)
302.771.000 Medijet silver, 45° angle (Autoclavable)
302.773.000 Measurement strip (Single use, Pack/20)
Measurement Strip for correct sizing of Bonnets,
Prongs and Masks.
302.774.000 Fixation Pillow (Single use, Pack/20)
302.740.000 nCPAP Starterset
10 x Medijet nCPAP generator, 1 x Prong micro,
2 x Prong small, 2 x Prong medium, 2 x Prong large,
1 x Prong x-large, 1 x Prong wide medium, 1 x Prong
wide large, 1 x Mask small, 1 x Mask medium,
1 x Mask large, 1 x Bonnet x-small, 2 x Bonnet small,
2 x Bonnet medium, 2 x Bonnet large, 1 x Bonnet
x-large, 1 x Bonnet xx-large, 1 x Bonnet xxx-large,
1 x Measurement strip
41
Neb
uliz
atio
n
07
07 | Nebulization
Rev. 06.15Subject to change without notice.
Aeroneb Solo Starter-Kit
301.820.000
301.820.004
Ultrasonic micro-pump aerosol nebulizer.
This set includes:
• Control module
• 2 x Aeroneb® Solo nebulizers with filler caps
• Adult T-adapter with silicone plug
• Universal mounting bracket
• AC/DC adapter
• Instruction manual
International: (EN, Euro plug)
English (UK plug)
301.821.005 Aeroneb Solo Convenience Kit(Adult, Single-Patient)
Aeroneb Solo convenience kit (pack/5)
This set includes:
• 5 x T-adapter 22 mm with silicone plug
• 5 x Luer adapters
302.422.010 Aeroneb Solo Convenience Kit(Pediatric, Single-Patient)
Aeroneb Solo convenience kit (pack/10)
This set includes:
• 10 x T-adapter 15 mm with silicone plug
• 10 x Luer adapters
302.423.010 Aeroneb Solo Convenience Kit(Neonatal, Single-Patient)
Aeroneb Solo convenience kit (pack/10)
This set includes:
• 10 x T-adapter 15 mm with silicone plug
• 10 x Adapter piece 10 mm
• 10 x Luer adapters
Aeroneb Solo
42
Neb
uliz
atio
n
07
Rev. 06.15Subject to change without notice.
Aeroneb Pro System
301.830.000
301.830.001
301.830.014
Ultrasonic micropump aerosol nebulizer.
This set includes:
• Control module
• Aeroneb Pro nebulizer unit with filler cap
• Adult T-piece with silicone plug
• Universal mounting bracket
• Equipment mount adapter
• AC/DC adapter
• Instruction manual
EN, Euro plug
EN, UK plug
ES, US plug
301.831.002 Nebulizer Kit (Adult, Reusable)
Accessories package autoclavable. (pack/2)
This set includes:
• 2 x Nebulizer unit with filler cap
• 2 x Adult T-adapter with silicone plug
Note: Used as spare part only
301.831.001 Nebulizer Kit (Pediatric/Neonatal, Reusable)
Accessories package autoclavable. (pack/2)
This set includes:
• 2 x Nebulizer unit with filler cap
• 2 x Pediatric T-adapter with silicone plug
• 2 x 15 male, 10 mm OD to 7.5 mm OD
• 2 x 15 female,10 mm OD to 7.5 mm ID
Note: Used as spare part only
302.421.005 Adapter Kit (Adult, Reusable)
Adapter package autoclavable. (pack/5)
This set includes:
• 5 x Adult T-adapter with silicone plug
Note: Used as spare part only
301.832.005 Adapter Kit (Pediatric/Neonatal, Reusable)
Adapter package autoclavable. (pack/5)
This set includes:
• 5 x Pediatric T-adapter with silicone plug
• 5 x 15 male, 10 mm OD to 7.5 mm OD
• 5 x 15 female, 10 mm OD to 7.5 mm ID
Note: Used as spare part only
Aeroneb Pro
43
Air
& O
xyge
n S
uppl
y
08
08 | Air & Oxygen Supply
Rev. 06.15Subject to change without notice.
O2 Filter and Water Trap
301.560.000
301.561.000
This filter and water trap protects the oxygen inlet
of bellavista against condensing water and dust and
thus ensures safe operation of the oxygen blender
also with uncertain oxygen quality.
Two versions are available:
DISS oxygen connection
• Details see manual 301.558.000
NIST oxygen connection
• Details see manual 301.558.000
301.258.000 bellavista Gas Inlet Connector (Oxygen, NIST)
NIST interface (ventilator side)
301.259.000 bellavista Gas Inlet Connector (Oxygen, DISS)
DISS interface (ventilator side)
302.657.000 O2 Connector Adapter (DISS Female)
O2 Connector Adapter (DISS Female)
302.550.000 O2 Connector Adapter AFNOR
O2 Connector Adapter AFNOR
302.551.000 O2 Connector Adapter G1/4
O2 Connector Adapter G1/4
Oxygen Supply
44
Air
& O
xyge
n S
uppl
y
08
Rev. 06.15Subject to change without notice.
Ventilator Interface Oxygen Supply Hose (White)
NIST DISS
Wall interface
301.258.300 301.259.300 3 m Oxygen supply hose DIN
301.258.310 301.259.310 3 m Oxygen supply hose AFNOR
301.258.320 301.259.320 3 m Oxygen supply hose AGA
301.258.330 301.259.330 3 m Oxygen supply hose BS (BOC)
301.258.340 301.259.340 3 m Oxygen supply hose SIS
301.258.350 3 m Oxygen supply hose
Carbamed
301.258.999 301.259.999 5 m Oxygen supply hose with
open end (non-EU)
Oxygen Hoses
45
Air
& O
xyge
n S
uppl
y
08
08 | Air & Oxygen Supply
Rev. 06.15Subject to change without notice.
302.428.000 Air/Oxygen Blender Package
This high flow blender gives you the possibility
to connect the central Air and Oxygen supply to
bellavista. The Air/Oxygen ratio is continuously
adjustable.
This set includes:
• 302.416.000 High Flow Blender (NIST)
• 302.417.000 Mixed Gas Hose (NIST)
• 302.418.000 Mounting Bracket
Please order separately:
• Air hose (NIST)
• Oxygen hose (NIST)
302.418.000 Mounting Bracket for High Flow Blender
Mounting bracket to mount the high flow blender to
the standard rail of the bellavista Trolley.
302.419.000 Water Trap for High Flow Blender (NIST)
This water trap protects the high flow blender and
the inlet of bellavista against condensing water and
dust and thus ensures safe operation of the device
also with uncertain air quality.
NIST air connection
Note: Optional
302.417.000 Mixed Gas Hose (NIST)
Mixed gas hose 1.0 m. To connect the high flow
blender to bellavista (NIST).
Note: Used as spare part only
External Blender
46
Air
& O
xyge
n S
uppl
y
08
Rev. 06.15Subject to change without notice.
Ventilator Interface Air Supply Hose
NIST
Wall interface
301.258.500 3 m Air supply hose DIN
301.258.510 3 m Air supply hose AFNOR
301.258.520 3 m Air supply hose AGA
301.258.530 3 m Air supply hose BS (BOC)
301.258.540 3 m Air supply hose SIS
301.258.998 3 m Air supply hose with open end (non-EU)
Air Hoses for External Blender
47
Spa
re P
arts
&
Mai
nten
ance
09
09 | Spare Parts & Maintenance
Rev. 06.15Subject to change without notice.
300.784.000 Internal battery
Internal battery
300.769.000 Oxygen cell
Oxygen cell
Shelf life 15 months at full specification
301.909.000 Oxygen cell tool
Oxygen cell tool
301.165.000 Filter set for bellavista
Filter set for bellavista
This set includes:
• 12 x patient air filter
• 2 x cooling air filter
• 2 x sintered metal filter
Power supply cable
301.322.000 Power supply cable CH angled
301.323.000 Power supply cable EU angled
301.324.000 Power supply cable UK angled
301.325.000 Power supply cable US angled
302.570.000 Power Supply Cable bellavista JP angled
Power Supply Cable bellavista JP angled
200.030.002 Fuse SPT 5 x 20 6.3A (Ceramic) 115V
Fuse SPT 5 x 20 6.3A (Ceramic) 115V
100.156.000 Knurled screw M8x16 (Trolley)
Knurled screw M8x16 (Trolley)
Spare Parts
48
Spa
re P
arts
&
Mai
nten
ance
09
Rev. 06.15Subject to change without notice.
302.500.000 SpO2 Adapter Neonatal
SpO2 Adapter Neonatal
(Part of 302.324.000)
302.564.000 SpO2 Sensor Interface Neonatal
SpO2 Sensor Interface Neonatal
(Part of 302.324.000)
302.566.000 SpO2 Sensor Neonatal
SpO2 Sensor Neonatal
(Part of 302.324.000)
301.516.000 Expiration valve mount
Expiration valve mount
Not included: Screws and expiration valve adapter
301.517.000 Expiration valve adapter
Expiration valve adapter for dual limp adapter
301.552.000 Silicone caps for Expiration valve (Autoclavable)
Silicone caps for Expiration valve (Autoclavable)
301.557.000 Filter element for O2 Filter and water trap
Filter element 5 µm for O2 Filter and water trap
301.560.000 / 301.561.000
49
Spa
re P
arts
&
Mai
nten
ance
09
09 | Spare Parts & Maintenance
Rev. 06.15Subject to change without notice.
301.260.000 Metal filter insert for bellavista O2 input
Metal filter insert for bellavista O2 input
100.075.100 Sintered metal filter
Sintered metal filter
(2 pcs required per bellavista)
301.102.000 Housing cover alarm
Housing cover alarm
301.038.000 Cooling fan cover
Cooling fan cover
301.043.000 Patient air filter cover
Patient air filter cover
301.042.000 Connector cover plate (fits either side)
Connector cover plate (fits either side)
301.041.000 O2 Cell cover
O2 Cell cover
50
Spa
re P
arts
&
Mai
nten
ance
09
Rev. 06.15Subject to change without notice.
301.956.000 Front handle for bellavista Trolley 301.105.000
Front handle for bellavista Trolley 301.105.000
301.976.000 Mounting parts set for support arm
Mounting parts set for support arm 301.106.000
This set includes:
• Swivel circuit bracket
• 4 x Circuit clip
• 4 x Cable clip
301.961.000 Slide ring for joints of support arm
Slide ring for joints of support arm 301.106.000
(2 pcs required per support arm)
51
Spa
re P
arts
&
Mai
nten
ance
09
09 | Spare Parts & Maintenance
Rev. 06.15Subject to change without notice.
301.972.000 Annual Maintenance Kit
Contains all required spare parts for the annual
maintenance of one bellavista unit.
This set includes:
• 300.769.000 Oxygen cell
• 301.165.000 Filter set
300.116.003 Biomedical Test-Set Ventilation
Calibration and test-set for ventilators and anaes-
thesia machines. Recommended for the bellavista
annual maintenance.
Features:
• Bidirectional flow measurement
• Pressure measurement
• Respiratory parameters
• Precise, reliable and mobile
This set includes:
• FlowAnalyser PF-300
• SmartLung Adult
• FlowLab software
301.858.000 CITREX H4
The compact and mobile testing device for ventilators.
• Bidirectional flow measurement
• Pressure measurement
• Respiratory parameters
• 13 gas standards and 7 gas types measured
• Data storage
• Battery operation
• Various interfaces (USB, serial, etc.)
This set includes:
• CITREX Device
• High performance battery
• Quick start guide
• USB cable
• Power supply
• Protection filter
• Micro SD memory card
301.863.000 CITREX Oxygen Measurement Option
CITREX Oxygen Measurement Option
Maintenance & Servicing
52
Spa
re P
arts
&
Mai
nten
ance
09
Rev. 06.15Subject to change without notice.
300.756.000 EasyLung (Adult, Reusable) (included in bellavista)
The EasyLung is an affordable, versatile general pur-
pose test lung providing a broad spectrum of benefits
to the respiratory care field.
• Handy and compact
• High-quality materials
• Simulation of adult lungs
300.162.000 SmartLung Adult (Adult, Reusable)
SmartLung, the cleverest, cheapest and most reliable
way to check function and precision of ventilators
and anaesthesia machines.
• Simulates adult lungs
• Resistance, compliance and leakage widely
adjustable
• Extremely handy and user-friendly
• Top performance and quality at a low price
300.400.004 SmartLung Infant (Pediatric, Reusable)
SmartLung, the cleverest, cheapest and most reliable
way to check function and precision of ventilators
and anaesthesia machines.
• Simulates pediatric lungs
• Resistance, compliance and leakage widely
adjustable
• Extremely handy and user-friendly
• Top performance and quality at a low price
500.040.000 TestLung Neonatal
The TestLung Neonatal is the ideal tool to test neona-
tal and pediatric ventilators.
• Two compliances
• Two separately adjustable resistances
• Leak simulator on each lung
Test Lungs
53
Spa
re P
arts
&
Mai
nten
ance
09
09 | Spare Parts & Maintenance
Rev. 06.15Subject to change without notice.
bellavista User Manual
301.280.000
302.329.000
301.097.000
301.281.000
301.182.000
301.279.000
302.382.000
301.278.000
302.265.000
301.181.000
302.318.000
301.788.000
301.282.000
302.325.000
301.309.000
301.526.000
302.384.000
301.524.000
301.789.000
301.790.000
301.525.000
302.467.000
302.468.000
CS Czech
DA Danish
DE German
EL Greek
EN English
ES Spanish
FI Finnish
FR French
ID Indonesian
IT Italian
JP Japanese
KR Korean
NB Norwegian
NL Netherlands (Dutch)
PL Polish
PT Portuguese
RU Russian
RU Russian (OEM Version)
SE Swedish
TH Thai
TR Turkish
VI Vietnamese
ZH Chinese
Operating Instructions
54
Spa
re P
arts
&
Mai
nten
ance
09
Rev. 06.15Subject to change without notice.
301.569.000 Integrated Expiration Valve Instruction Manual
Operating Instruction Integrated Expiration Valve
(EN/DE)
301.520.000 Dual Limb Adapter User Manual
Operating instruction dual limb adapter (EN/DE)
302.437.000 External Blender Manual
Operating instruction External Blender (EN/DE)
301.558.000 Water Trap User Manual
Operating instruction O2 filter and water trap
(EN/DE)
301.505.000 Inlet Filter Manual
Operating instruction Inlet Filter (EN/DE)
301.571.000 SpO2 Package Neonatal Manual
Operating instruction SpO2 Package Neonatal
(EN/DE)
imtmedical ag . Gewerbestrasse 8 . 9470 Buchs . SwitzerlandT +41 81 750 66 99 . www.imtmedical.com . www.bellavista-ventilator.com
301.
885.
000
| 06.
15A
ll ®
and
™ la
bele
d br
ands
and
pro
duct
s ar
e pr
oper
ty o
f the
com
pany
imtm
edic
al a
nd c
an n
ot b
e us
ed w
itho
ut w
ritt
en c
onse
nt. S
ubje
ct t
o ch
ange
wit
hout
not
ice.