Product Catalog for Crossover

PLANT - P.O. BOX 819–INDEPENDENCE, LA 70443(985) 878-6716 • FAX (985) 878-6378

e-mail: [email protected]

[email protected] • (800) 486-6410 ~ (985) 878-6716 • www.CrossoverInc.com

Crossover, Inc has been servicing the oil country tubular market since 1979. Our commitment to total quality has made Crossover one of the leading manufacturers in the OCTG market. This assurance is recognized both domestically and internationally by, major oil producers in their promotion and application of Crossover tubular products.

By utilizing current machining technology, modern inspection processes, and systematic up-to-date training of personnel, Crossover has earned the reputation of a dependable leader in the tubular accessory market. We are continually expanding our capabilities, assuring our continued success in our field.

Crossover products are marketed through domestic and international supply stores and agents. We pride ourselves with competitive pricing without sacrificing quality and fast delivery.

Crossover is licensed under API Spec 5CT and Spec 7. Under our API approved Quality Assurance Program, all phases of the manufacturing process are closely monitored.


Crossover, InC. ProduCts

Crossover inc. Manufactures a wide range of tubular products. We are an API Licensed Manufacturer and End Finisher of the following equipment for

drilling and completing wells.

A) Completion Equipment1. Pup Joints . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

2. Perforated Pup Joints . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

3. Couplings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 a.) Standard b.) Combination / Reducing c.) Modified (seal rings)

4. Swages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

5. Crossover Subs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

6. Nipples . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

7. Bull Plugs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Not Shown

8. Bell Nipples . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Not Shown

9. Wireline Entry Guides . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

10. Ball Catcher Subs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

11. Collet - Type Ball Catcher Sub/Hydro-Trip Sub . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

12. Flow Couplings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

13. Blast Joints . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

14. Telescoping Joints . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

15. Wire Line Landing Nipple . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

16. Safety Joints . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 a.) Straight Pull b.) Rotation Release

17. Overshot Tubing Seal Divider . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

18. Hammer Union Crossovers, Tees & Crosses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Not Shown

19. Polish Bore Receptacles & Seal Units . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Not Shown

B) Rod Pumping Equipment1. Flow Tees . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Not Shown

2. Gas Anchors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

3. Drain Nipples . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

4. Combination Sucker Rod Coupling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Not Shown

5. Safety Joints . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Not Shown

6. Pump Seating Nipples . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

C) Drilling Equipment1. Drill Pipe Pup Joints . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 - 3

2. Bit Subs (with Float Valve Bore) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15-16

3. Float Valves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Not Shown

4. Kelly Saver Subs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15-16

5. Crossover Subs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15-16

6. Drill Collar Lift Subs & Lift Plugs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

7. Circulating / Pump-In Sub / Circulating Swage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17


C) Drilling Equipment (continued)

8. Drop Ball Circulating Sub . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

9. Drill Pipe / Casing Swages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

10. Side-Entry Subs a.) Welded . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 b.) Integral . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Not Shown

11. Thread Protectors a.) Steel with Lifting Bale . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 b.) Pressed Steel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Not Shown c.) Plastic . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Not Shown

12. Stabbing Guides . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

13. Drifts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Not Shown a.) Metal b.) Plastic

14. Pipe Scrub Brushes - Jets Optional . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Not Shown

15. Jet Cleanout Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

16. Ring Gauges - Bit & Stabilizers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Not Shown

17. Flag Sub . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

18. Swivel / Circulating Head w/Side Outlet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

19. Rotary Circulating Head w/Side Swivel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

20. Upper & Lower Kelly Valves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

21. Safety Valves / Rig Floor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 a.) Drill Pipe b.) Tubing c.) Casing

22. Inside Blowout Preventer (IBOP) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

23. Drop-In Check Safety Valave . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

D) Fishing Tools1. Mills

a.) Junk . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28-29 b.) Taper . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 c.) Round Nose . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29 d.) Drill Pipe / Collars . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29 e.) Econo . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Not Shown

2. String / Watermelon Reamer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

3. Safety Joints . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

4. Boot Baskets / Junk Baskets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

5. Impression Blocks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

6. Taper Taps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

7. Die Collars . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

8. Swaging Tools - Casing /Tubing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33

9. Spears Wire Line / Wire Rope . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33

10. Core - Type Junk Baskets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34

11. Reverse Circulating Junk Baskets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35




E) Washover Pipe & Accessories1. Washover Pipe . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36

2. Drive Subs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36

3. Rotary Shoes and Burning Shoes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36-37

4. Safety Joints . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38

5. Lift Plugs / Subs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39

F) Service Tools1. Casing Roller . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40-41

2. Crossover Gravel Pack Tools (Cup Type) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42

3. Stabbing Guides . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

4. Drifts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Not Shown

5. Lift Plugs / Subs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

6. Wire Line Grabs a.) Straight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Not Shown b.) Crank Shaft Type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33

7. Test Plugs Low-Torque Test Plugs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Not Shown

8. Casing Scrapers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43

9. Type “F” BOP CUP Tester . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44

G) Pressure Control1. Wire Line Lubricator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45

2. Wire Line Unions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45

3. Bleed-Off Subs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45

4. Blanking Plugs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45

H) Custom Made accessoriesCrossover, Inc. offers a full range of custom made accessories. Contact us for information.

Contact Information:

Ty Livingston • Bill Lindsey • Gwen Southworth • Glenda Bel

Phone: (985) 878-6716 • Fax: (985) 878-6378 • Toll Free (800) 486-6410

Website: crossoverinc.com • E-mail: [email protected]


API sPeC 5Ct CertIfICAte


API sPeC 7-1 CertIfICAte


Crossover, InC.

Pup JointsCrossover pup joints are manufactured from seamless mechanical tube. As with all Crossover products, each piece is marked with a distinctive heat number that is fully traceable. A complete range of sizes (1" to 4.5"), weights (standard or heavy wall), and grades (J-55, N-80, L-80, and P-110) are commonly available from stock in 2', 3', 4', 6', 10', and 12' lengths. Other lengths are available upon request.

Pup Joint

Premium Pup Joint

API Tubing Pup Joints Manufactured according to API Spec 5CT using prime, seamless mechnical tubing. Optional diameters, lengths, weights, and grades are available upon request.

Diameters: 3/4" through 4.5" nominal O.D.

Weights: Standard or Heavy Wall

Lengths: 2, 3, 4, 6, 8, 10, 12 ft. Standard (Other lengths available upon request)

Grades: J-55, N-80, N-80 Q & T, L-80, P-110

Connections: EUE, NUE, Buttress

Premium Tubing Pup JointsSeamless pup joints with premium connections are available in API and exotic alloy grades. Premium ends are threaded by the manufac-turer or authorized licensee.



Lengths: 2, 3, 4, 6, 8, 10, 12 ft. Standard

Grades: J-55, N-80, N-80 Q & T, L-80, P-110, and special grades

Connections : Premium threads available include Atlas Bradford, Baker Hughes, Hydril, Interlock, Kawasaki, Mannesmann, NKEL, NKK, OECO, TKC, VAM and Tenaris

Casing Pup JointsAny length, weight, and grade available upon request.

Diameters: 4.5" through 20" nominal O.D.


Lengths: Custom lengths available from 2 ft. through 20 ft.

Connections: STC, LTC, Buttress, and premium threads

Pup Joint Options: Special grades are available upon request including:

Custom SizesCoating O.D./I.D.Bullet Nose Thread FormPerforationsCombinations Threads

Special MarkingsSpecial PaintMagnetic Particle Special Thread ProtectionThird Party Inspection

S-95, 9 chrome, 13 chrome, 21 chrome, 310 stainless, 316 stain-less, 316L stainless, titanium, aluminum, exotic alloys

11


Crossover, InC.

Perforated Pup Joints Available with standard or special perforation size and spacings. Each joint has four rows of 3/8 inch holes drilled longitudinally along the tube as standard. Optional patterns, hole size, and lengths furnished upon request.

Perforated Pup Joint



Lengths: As required

Grades: J-55, N-80, N-80 Q & T, L-80, P-110, and special grades

Connections: EUE, NUE, Buttress, Premium, and T & C

Drill Pipe Pup JointsDrill Pipe pup joints are integral-type made of AISI 4140/4145 modified alloy steel bar, fully heat treated to 285-341 BHN and 40 ft-lbs min. impact value. All connections are machined according to API specifications.

When ordering or requesting a quote, please specify:

* Nominal Size (See Diagram Section A)

* Bore (See Diagram Section B)

* Tool Joint O.D. (See Diagram Section C)

* Size, type, & location of connections (example: 4.5 “ IF Box up x 4.5” Pin Down)

* Length (See Diagram Section G)

* 18 Degrees tapered or square shouldered

* Plastic, pressed steel or steel thread protectors

22


Crossover, InC.

Crossover Drill Pipe Pup JointsStandard Size (in/mm)

Nominal Size

BoreTool Joint

O.D. Connection Size

& TypeElevator

Upset Dia.

Tong Space Length Available Length* (G)

Approx. Weight

Box Pin

ft/mm lbs/kg(A) (B) (C) (D) (E) (F)

3 1/2

88.92 1/4

57.15

4 3/4

120.65 NC38(3 1/2 IF)

3 7/8

98.4310 1/2

266.78

203.2

5 / 1524 145 / 6610 / 3048 23 / 140

5127

15 / 4572 310 / 14120 / 6096 395 / 179

4101.6

2 13/16

71.44

5 1/4

133.35 NC40(4FH

4 3/16

106.3610

2547

177.8

5 / 1524 180 /8210 / 3048 290 / 132

5 1/2

139.715 / 4572 395 / 17920 / 6096 505 / 229

3 1/4

82.55

5 3/4

146.05 NC46(4 IF)

4 1/2

114.310

2547

177.8

5 / 1524 170 / 7710 / 3048 245 / 111

6152.4

15 / 4572 315 / 14320 / 6096 390 / 177

4 1/2114.3

3 1/4

82.55

6152.4 NC46

(4 IF)4 11/16

119.0610

2547

177.8

5 / 1524 220 / 10010 / 3048 350 / 159

6 1/4

158.7515 / 4572 480 / 21820 / 6096 610 / 277

3 1/2

88.9

6 1/4

158.75 NC50(41/2 IF)

5127

10254

7177.8

5 / 1524 205 / 9310 / 3048 315 / 143

6 3/8

1161.9315 / 4572 420 / 19120 / 6096 525 / 238

5127

3 1/2

88.9

6 3/8

1161.93 NC50(41/2 IF)

5 1/8

130.1810

2547

177.8

5 / 1524 255 / 11610 / 3048 425 / 193

6 1/2

165.115 / 4572 595 / 27020 / 6096 765 / 347

3 3/4

95.25

6 3/8

1161.93 NC50(41/2 IF)

5 1/8

130.1810

2547

177.8

5 / 1524 230 / 10410 / 3048 375 / 170

6 1/2

165.115 / 4572 520 / 23620 / 6096 665 / 302

*Other lengths are available upon request

33


Crossover, InC.Coupling Dimensions, Weights and Make-Up Loss Factors

Manufactured in accordance with APSCTTUBING

Cpig O.D., in. Make-up Loss Multiplication FactorsA

P i p e Size

Cpig Length, In. EUE NUE BTC Cpig Weight, lbs. Cpig “J” FactorB, in. EUE NUE BTC

EUE NUE BTC Reg SpCl Reg SpCl EUE NUE EUE NUE BTC R1 R2 R1 R2 R1 R2

2 3/8 4.875 4.250 8.500 3.063 2.910 2.875 2.875 2.700 3.42 2.82 5.46 2.938 2.625 4.750 1.0073 1.0054 1.0062 1.0045 1.0161 1.0107

2 7/8 5.250 5.125 8.500 3.668 3.460 3.500 3.500 3.220 5.27 5.15 8.14 3.125 3.063 4.750 1.0080 1.0059 1.0078 1.0058 1.0161 1.0107

3 1/2 5.750 5.625 8.500 4.500 4.180 4.250 4.250 3.865 9.02 8.17 11.74 3.375 3.313 4.750 1.0090 1.0066 1.0087 1.0065 1.0161 1.0107

4 6.000 5.750 9.000 5.000 4.750 4.750 4.400 10.62 9.57 14.17 3.500 3.375 5.000 1.0095 1.0070 1.0090 1.0066 1.0172 1.0114

4 1/2 6.250 6.125 9.500 5.563 5.200 5.200 4.920 13.31 10.76 15.72 3.625 3.563 5.250 1.0099 1.0074 1.0097 1.0072 1.0183 1.0121

CASING

Cpig O.D., in. Make-up Loss Multiplication FactorsA

P i p e Size

Cpig Length, In. STC BTC Cpig Weight, lbs. Cpig “J” FactorB, in. STC LTC BTC

STC LTC BTC LTC Reg SpCl STC LTC BTC STC LTC BTC R2 R3 R2 R3 R2 R3

4 1/2 6.250 7.000 8.875 5.000 5.000 4.875 8.05 9.07 10.11 3.625 4.000 4.938 1.0073 1.0055 1.0083 1.0062 1.0109 1.0082

5 6.500 7.750 9.125 5.563 5.563 5.375 10.18 12.56 12.99 3.750 4.375 5.063 1.0076 1.0057 1.0094 1.0070 1.0113 1.0085

5 1/2 6.750 8.000 9.250 6.050 6.050 5.875 11.44 14.03 14.14 3.875 4.500 5.125 1.0080 1.0060 1.0097 1.0073 1.0114 1.0086

5 3/4 9.375 6.375 15.49 5.188 1.0116 1.0087

6 5/8 7.250 8.750 9.625 7.390 7.390 7.000 19.97 24.82 24.46 4.125 4.875 5.313 1.0087 1.0065 1.0108 1.0081 1.0120 1.0090

7 7.250 9.000 10.000 7.656 7.656 7.375 18.34 23.67 23.22 4.125 5.000 5.500 1.0087 1.0065 1.0111 1.0083 1.0125 1.0094

7 5/8 7.500 9.250 10.375 8.500 8.500 8.125 26.93 34.23 34.84 4.250 5.125 5.688 1.0090 1.0068 1.0115 1.0086 1.0130 1.0098

8 5/8 7.750 10.000 10.625 9.625 9.625 9.125 35.58 47.48 45.94 4.375 5.500 5.813 1.0094 1.0070 1.0125 1.0094 1.0134 1.0100

9 5/8 7.750 10.500 10.625 10.625 10.625 10.125 39.51 55.77 50.99 4.375 5.750 5.813 1.0094 1.0070 1.0312 1.0099 1.0134 1.0100

10 3/4 8.000 10.625 11.750 11.750 11.250 45.53 56.68 4.500 5.813 1.0097 1.0073 1.0134 1.0100

11 3/4 8.000 10.625 12.750 12.750 49.61 61.74 4.500 5.813 1.0097 1.0073 1.0134 1.0100

13 5/8 8.000 10.625 14.375 14.375 56.23 69.95 4.500 5.813 1.0097 1.0073 1.0134 1.0100

16 9.000 10.625 17.000 17.000 78.98 87.56 5.000 5.813 1.0111 1.0083 1.0134 1.0100

18 5/8 9.000 10.625 20.000 20.000 118.94 138.03 5.000 5.813 1.0111 1.0083 1.0134 1.0100

20 9.000 11.500 10.625 21.000 21.000 98.25 126.74 110.33 5.000 6.250 5.813 1.0111 1.0083 1.0134 1.0100

GRADE Outside Painted GRADE Outside PaintedH-40 Black C-95 Brown

J-55 or K-55 Green

P-110 WhiteL-80 Red / Brown Band

N-80 Red V-150 Purple

Crossover Combination/Reducing Tubing Couplings

Size Weight Each Size Weight

Each Size Weight Each Size Weight

Each

2 EUE x 2 Reg 5 2 1/2 EUE x 2 1/2 Reg 7 3 EUE x 2 Reg 15 4 Reg x 3 Reg 10

2 1/2 Reg x 2 Reg 5 3 Reg x 2 Reg 11 3 EUE x 2 EUE 14 4 Reg x 3 EUE 12

2 1/2 Reg x 2 EUE 5 3 Reg x 2 EUE 11 3 EUE x 2 1/2 Reg 16 4 EUE x 3 Reg 11

2 1/2 EUE x 2 Reg 8 3 Reg x 2 1/2 Reg 10 3 EUE x 2 1/2 EUE 15 4 EUE x 3 EUE 11

2 1/2 EUE x 2 EUE 8 3 Reg x 2 1/2 EUE 10 3 EUE x 3 Reg 13 4 EUE x 4 Reg 10

Right & Left hand threads, Acme 8, Armco Seal Lock or Buttress Threads, Sharp Threads & Other Special Threads are also available

44


Crossover, InC.

Swages

Tubing and Casing Swages

Crossover SubsCrossovers are provided in a full range of threads, Grades and sizes

Crossover

55


Crossover, InC.NipplesCrossover adapter nipples, tubing & casing nipples, and seating nipples are made from API grades of pipe and mechanical tubing. Rigid quality standards are maintained throughought the manufacturing process by frequent inspection and testing. Raw material quality is assured by our quality assurance program.

Adapter NipplesOur seamless pipe adapter nipples are available with grooved, threaded, square cut or beveled ends or in combinations of these ends. Lengths: 3” - 12”

Tubing & Casing NipplesCrossover casing nipples are available in standard lengths with beveled, grooved, or plain ends or threaded to API specifications for casing threads, short and long, combunation, right and left hand.

Materials: J-55, K-55, N-80, P-110

Lengths: 8” - 36” in increments of 2” (longer sizes available upon request).

Pump Seating Nipples

Normal Pipe Size* O.D. I.D.

Length

8” 12”

Weight Each Weight Each

2” O.D. Special Thread 2.000” 1.480”

6 1/4

92” API Upset 2.625” 1.781”

2” Non-Upset 2.625” 1.781”6

2” Special Thread 2.625” 1.781”

2 1/2” API Upset 3.125” 2.250” 812

2 1/2” API Upset 3.125” 2.280”

112 1/2” API Non-Upset 3.125” 2.250”

82 1/2” Special Thread 3.125” 2.250”

3” API Upset 3.750” 2.750” 17

*Special thread indicates buttress.

Adapter Nipple Tubing & Casing Nipple Pump Seating Nipple

Pump Seating NipplesPump seating nipples are furnished in 8” and 12” lengths and all standard sizes with upset or non-upset tubing threads which conform to API specifications. Special threads may be ordered. Pump seating nipples are ordinarily furnished with tubing threads. Nipples with working barrel threads must be specified. V Threads are not recommended for lifting

66


Crossover, InC.Wireline Entry Guides /Ball Catcher SubsCrossover Wireline Entry Guides may be plain or with shear-out ball seat, are installed on the bottom end of the tubing to allow the tubing string to be pressured. When the differential pressure at the tool reaches a predetermined value, the ball and seat are pumped out of the tool. After the ball seat has been pumped out, these subs allow unrestricted access from the tubing into the casing below the tubing string. These products are available in a variety of configurations. The tool illustrated here offers both a reentry guide to simplify wireline operations as well as an optional conical guide to facilitate easy entry when running the tubing through the top of a liner or into a sealbore packer. They can also be furnished with a mule shoe or half mule shoe bottom. Other options include a solid pump-out plug and expendable valves. They can also be furnished in a box X box configuration for those applications where it is necessary to run additional tubing or completion equipment below the shear-out ball seat sub.

Wireline Entry Guide Specification Guide

SizeBall

Diameter*Nominal ID

After ShiftingStandard THD

Specification Box Up**

2 7/8” 1 3/4” 2.437” 2 7/8” EU 8 RD

3 1/2” 2 1/2” 3.000” 3 1/2” EU 8 RD

* Standard ball size. Other sizes available upon request** Standard thread specified. Other sizes available upon request

Wireline Entry Guide with Shear-Out Ball Seat(Shown with optional conical guide)

77


Crossover, InC.

88

Collet Cather SubThe Collet Catcher Sub is installed in the tubing string below a hydraulically actuated tool such as a hydrostatic packer to provide a method of applying the tubing pressure required to activate the tool.

To set a hydrostatic packer, a ball is circulated through the tubing and packer to the Sub, and sufficient tubing pressure is applied to activate the setting mechanism in the packer. After the packer is set, a pressure increase to approximately 2,500 psi (17, 23 MPa) shears screws to allow the ball seat to move down until the fingers snap back into the groove. The sub is then full opening, and the ball passes on the down tubing.

Specification Guide

SizeBall Size

Ball Seat ID Standard Thd Specs (A)

Box Up & Pin DownBefore Shifting

After Shifting

In. mm

In. mm

In. mm

In. mm

1.90048, 26

1 7/16

25, 401.25031, 75

1.51538, 48

1.900 EU or NU48, 26

2 3/8

60, 33

1 1/2

38, 101.375 34, 92

1.86047, 24 2 3/8 EU or NU

60, 331 3/4

44, 451.625 41, 28

1.90648, 41

2 7/8

73, 032 1/8

53, 982.000 50, 80

2.37560, 33

2 7/8 EU or NU73, 03

3 1/2

88, 90

2 1/2

63, 502.312 58, 72

2.78170.64 3 1/2 EU or NU

88, 902 3/4

69, 852.500 63, 50

2.95375.01

4 1/2

114, 30

3 1/16

77, 792.734 69, 44

3.61591, 82 4 1/2 EU or NU

114, 303 3/8

85, 732.986 75, 84

3.86598, 17

(A) Threads shown Below are “standard” for the respective sizes. Other threads are available on request. Please specify threads when ordering.

ORDERING EXAMPLE:Size: 2 3/8 MODEL “E” COLLET CATCHER SUB w/ 2 3/8 OD EU 8 Rd Box x Pin, for J-55, 4.7 lb/ft tubing w/ 1 3/4 Diameter Ball


Crossover, InC.

99

Blast JointsCrossover blast joints are manufactured from seamless mechanical tube in sizes ranging from 2 3/8” to 4 1/2 “ OD. Any length, grade of material, and threading is available at the customer’s request. Both API and Premium threads are available.

Blast Joint

Flow CouplingsCrossover flow couplings are manufactured from seamless mechanical tube in all sizes. Any length, grade of material, and threading is available at the customer’s request. Both API and Premium threads are available.

Flow Coupling


Crossover, InC.

1010

Splined Expansion JointThe splined expansion joint is designed for use in both single and multiple string completions to compensate for tubing movement. The tube provides 10 feet of movement and utilizes rugged seals for reliable continuous service. The telescoping action permits the tool to be used as a bumper sub or jar when retrieving the installation. Shear screws may be installed to initially position the expansion joint in its extended, collapsed, or mid-stroke position at one foot intervals. A rotation lock lets the operator rotate through the expansion joint in any position.

Features & Benefits

• Shear screw can easily be added or removed to adjust shear value.

• Tool can be locked in fully extended, fully collapsed, or midstroke position with shear screws. Full length keys provide transmission of torque through full length of travel.

• Metal goods suitable for H2S service per NACE Standard MR-01-75-88. Also available in stainless steel for H2S and CO2 environments.

Splined Expansion Joint Specification GuideTubing

SizeMax O.D. Min I.D.

Standard Thread Specs (Box Up & Pin Down)

Pressure Rating

Tensile Rating

Torque Rating

2 7/8” 4.500” 2.375” 2 7/8” EU 10,000 166,000 7,000

3 1/2” 5.250” 2.920” 3 1/2” EU 10,000 240,000 8,000

Other Sizes Available

Splined Expansion Joint

Swivel Expansion JointThe swivel expansion joint is a swivel joint until extended to the full stroke when a clutch engages and allows torque to be transmitted through the joint. Standard stroke length is nine feet with other lengths available upon request. This tool is available in all sizes.

Swivel Expansion Joint


Crossover, InC.

1111

Crossover Types S and N Landing Nipples

Tubing SizeType S Type N

Nipple Bore / Inches Packing Bore / Inches No-Go ID / Inches

OD /In Wt / Ft ID / In Drift In Standard Optional Standard Optional Standard Optional

1.050 1.20 0.824 0.730 0.714 0.714 0.6561.315 1.80 1.049 0.955 0.875 0.937 0.875 0.937 0.850 0.885

1.6602.33 1.380 1.286

1.250 1.250 1.1352.40 1.380 1.286

1.9002.40 1.650 1.516

1.500 1.438 1.500 1.438 1.448 1.4012.60 1.610 1.5162.90 1.610 1.516

2.000 3.40 1.670 1.576 1.500 1.500 1.448

2.0633.25 1.751 1.657

1.625 1.625 1.5363.40 1.750 1.657

2.3754.60 1.995 1.901

1.875 1.905 1.875 1.7914.70 1.995 1.901

2.8756.40 2.441 2.347

2.313 2.380 2.313 2.2056.50 2.441 2.347

3.5009.20 2.992 2.867

2.875 2.750 2.750 2.875 2.635 2.7609.30 2.992 2.86710.30 2.992 2.797

4.00010.90 3.476 3.351

3.313 3.313 3.13511.00 3.476 3.351

4.500 12.75 3.958 3.833 3.813 3.813 3.725

Type XO Landing Nipple

Type XON Landing Nipple

Type RO Landing Nipple

Type RON Landing Nipple

Type S Landing Nipple

Type N Landing Nipple

Baker Type Model F&R Nipples Also Available


Crossover, InC.

1212

Straight Pull / Shear OutCrossover, Inc. Straight Pull / Shear Out safety jointis used between packers in dual and triple completions. It is also used when rotational release is not desired. When run above the upper packer in a single string completion, however, the shear value should be adjusted to compensate for any hydraulic conditions that exist when the string is landed, or that are created by well treating operations.

Sizes 1.900 and 2 1/16” are both equipped with 12 annealed steel shear screws, each value at 1,900 lbs. for max. shear value of 22,800 lbs. Sizes 2 3/8”, 27/8” & 3 1/2” are equipped with 6 annealed steel shear screws, each vale at 10,000 lbs. for max. of 60,000 lbs.

Specification Guide

SizeNOM. O.D.inch

NOM. O.D.inch

Standard Thd Specs

Box Up & Pin Down

1.900 2.50 1.67 1.900 NU 10 RD

2 1/16 2.50 1.67 2 1/16 Int. Joint

2 3/8 2.91 1.97 2 3/8 EU 8 RD

2 7/8 3.69 2.41 2 7/8 EU 8 RD

3 1/2 4.50 2.94 3 1/2 EU 8 RD Straight Pull / Shear Out

Rotation ReleaseThe safety joint provides for emergency recovery of the major portion of the tubing string should it become necessary to abandon the equip-ment below. Precision left-hand square threads facilitate release of the joint by right-hand tubing rotation. Equipment requiring right-hand rotation should not be used below the safety joint

Tubing Safety Joint Specification Guide

Size Max. O.D. NOM. I.D.Standard Thd Specs

Box Up & Pin Down

2 7/8” 3.719” 2.422” 2 7/8” EU 8 RD

3 1/2” 4.531” 2.984” 3 1/2” EU 8 RD

*Threads shown are for respective sizes. Other sizes and threads are available when ordering.


Crossover, InC.

1313

Overshot Tubing Seal DividerThis equipment is usually recommended for use in wells where sand or trash present a problem in retrieving wireline plugs. The inner mandrel incorporates an integral nipple profile where a plug can be installed. The divider overshot is run on the tubing and latched on the divider mandrel, protecting the plug choke from trash, sand, and debris. A simple turn of the tubing (at the divider) is designed to release divider mandrel.

On-Off ConnectorsTubing

O.D.Washover Shoe

Max O.D.Max BFC

Profile Bore

2 3/8”

3.125

1.8753.750

4.500

5.500

2 7/8”

4.500

2.3125.500

6.500

3 1/2”

5.500

2.8126.500

7.250

Overshot Tubing - Seal Divider and

Choke Set in Nipple

Tubing Seal

Divider

CHOKE

OVERSHOT

Gas AnchorsCrossover gas anchors improve rod pump efficiency and eliminate or reduce fluid pound to extend pump life.

Gas Anchor Specification GuideSize A B C D

2 7/8” 3 1/2” 4” 1” Nom. 2 7/8” EU

3 1/2” 4 1/2” 4 7/8” 1 1/2” Nom. 3 1/2” EU

Other sizes available upon request


Crossover, InC.

1414

Drain NipplesThe Crossover Type “H” drain nipple provides a method of draining the tubing by pressure (differential between tubing and annulus fluid). It requires no mechanical manipulation and provides a positive means of dumping the fluid in the tubing string, permitting the fluid level in the well to equalize. It is also less expensive than perforating tubing. It helps eliminate pollution, fire hazard, and the expense and wasted time of wet jobs. Offers full tubing ID and provides a means to pump down the tubing to kill a gassy well.

Features & Benefits

• You can run oversize tubing pumps without having to pull a wet tubing string.

• You can run hydraulic tubing anchors without fear of having to drag the anchor from the well in a set position.

• You can run tubing to greater depths in pumping wells because the fluid can be dumped eliminating the necessity of lifting the heavy fluid load with the tubing string in the event of stuck pumps.

• A simplified design incorporating a minimum number of working parts.

• Large drain ports permit rapid draining for more efficient draining of heavy crude.

• The drain is furnished with multiple shear pins.

Drain Nipple Specification GuideTubing Size O.D. Tool O.D. Tool I.D. Port Flow Area Total Length

2 3/8” 3 1/2” 1 15/16” 1.77” 11 3/4”

2 7/8” 3 7/8” 2 7/16” 2.76” 12”

3 1/2” 4 1/2” 2 15/16” 3.98” 12”

4 1/2” 5” 3 15/16” 5.78” 12”

Other sizes available upon request

After calculating the surface pressure required, select a drain unit equal to or exceeding the calculated requirement. The proper drain unit is made up in the tubing string and always runs above the tubing anchor or subsurface pump, approximately two to three joints, to avoid sand or foreign materials and allow alignment above any offset created by the anchor. To open the drain, simply apply pressure down the tubing string, by hand pump or similar method, to equal the calculated surface pressure. Allow the tubing to drain and equalize with the annulus fluid level and pressure before pulling. Drain Nipple


Crossover, InC.

1515

Rotary Subs, Lift Subs & Lift PlugsCrossover rotary subs are made with adequate fishing neck and tong space length.

When Ordering or requesting a quote please specify:

On all subs

• Sub use (such as kelly sub, x-over drill pipe to drill collar, x-over drill collar to drill collar, bit sub, etc.) so we can give you the correct bevel diameter.

• Overall length

• Largest diameter

• Bore

• Size & type of connections, indicating pin or box, & special joint features such as bore back or stress relief groove

On reduced section subs, add the following specifications:

• Diameter of reduced section

• Length of reduced section: 18 or 24 inches

On bit subs, add the following specifications:

• Float bore, size and type

On kelly saver subs with rubber protector specify:

• Desired OD of protector

Straight OD Subs

Box x Box Box x Pin Pin x Pin

Bit Subs Kelly Saver Subs

Bit Sub With Float Bit Sub No Float No Protector Groove for Protector Throw-Away


Crossover, InC.

1616

Reduced Section Subs

Box x Box Box x Pin Pin x Pin Box x Box Box x Pin Pin x Pin

Lift SubsAll Crossover lift subs are made with AISI 4140/4145. They are machined and heat-treated according to drill collar specifications.


• Drill collar OD (A)

• Tool joint OD (B)

• Tapered, square shoulder or combination

• Drill pipe OD (C)

• Drill collar connection size & type (D)

• Bore

• Pressed steel or steel thread protectors

Lift PlugsIf specified, Crossover lift plugs will be center bored to reduce weight. All are manufactured from AISI 4140/4145 modified alloy steel and are heat-treated.


• Drill collar OD (A)

• Drill collar connection size & type

• Lifting plate OD (B)

• Bore (C)


Crossover, InC.

1717

Circulating Sub/SwageOD Thread

4 3/4” 3 1/2” IF

6 1/4” 4 1/2” IF

Other Sizes Available Upon Request

Drop Ball Circulating Sub

Outside Diameter 4 3/4” 6 1/2” 8”

Sleeve ID 1 1/2” 2 1/16” 2 1/16”

Sub ID 1 3/4” 2 1/4” 2 1/4”

Ball OD 1 7/8” 2 1/4” 2 1/4”

Circulating Sub/SwageCrossover circulating sub/swages are manufactured from AISI 4140/4145.


Crossover, InC.

1818

Side

Ent

ry S

ubDr

ill P

ipe

Box

x Pi

n x

2” 1

502

Fem

ale


Crossover, InC.

1919

Stee

l Thr

ead

Prot

ecto

rsw

ith li

fting

bal

e


Crossover, InC.

2020

Stabbing GuidesStabbing Guides allow for quicker, easier stabbing and addsprotection from stabbing damage. The latch holds the stabbing guide in place on both new and worn box O.D.’s. The spring loaded lever, when triggered, releases the guide for quick removal after stabbing.

O.D. Size / Connection Thread Type Weight per Ft. Weight3/4” / CS 1.2# -1.5# 5.00

1” / CS 2.25 # 4.50

1 1/4” / CS 3.02# - 3.24# 5.50

1 1/2” / CS 3.64# 5.50

2 1/16” / CS 3.25# 6.50

2 3/8” / CS 4.70# 6.00

2 3/8” / PH-6 5.95# 6.00

2 7/8” / CS 6.5# 7.00

2 7/8” / PH-6 7.9# 6.50

2 7/8” / PH-6 8.7# (Small Body) 6.50

2 7/8” / PH-6 8.7# (Large Body) 11.00

2 7/8” / 8RD 6.5# (Small Body) 6.50

2 7/8” / 8RD 6.5# (Large Body) 10.50

3 1/2” / CS 9.3# - 10.3# 10.00

3 1/2” / PH-6 12.95# 9.50

3 1/2” / IF 4 3/4” (Small Body) 9.50

3 1/2” / IF 4 3/4” (Large Body) 12.00

4 1/2” / CS 12.75 12.00

4 1/2” / PH-6 15.50 12.00

4 1/2” / XH 6 1/4” 14.00

4 1/2” / IF 6 1/2” 14.00

5” / PH-6 20.3# 14.00

5 1/2” / PH-6 23# 14.00Other sizes and types of connections are in stock and available upon request

All metal types are available in the above sizes, other sizes and connections upon request.

All Metal TypeAll Metal Type


Crossover, InC.

2121

Jet B

ull N

ose

Jet S

ubw

/Bul

l Nos

e

Cros

sove

r Jet

Cle

an O

ut T

ools


Crossover, InC.

2222

Flag SubThe flag sub is placed immediately below the plug dropping head and swivel. The position of the flag indicates that the pump-down plug has been released from the head and has moved down the drill pipe.


Crossover, InC.

2323

Cros

sove

r Inc

. Sw

ivel

w/2

” 15

02 S

ide

Outle

t

Part

s Li

st1.

En

d Co

ver,

2 ea

ch

2.

Split

Rin

g, 2

Eac

h

3.

Bear

ing,

2 e

ach

4.

Bear

ing

Hold

er, 2

eac

h NO

TE: 1

may

be

Left-

Hand

ed d

epen

ding

on

Date

of M

anuf

actu

re

5.

Barr

ell,

1 ea

ch N

OTE:

1 m

ay b

e Le

ft-Ha

nded

dep

endi

ng o

n Da

te o

f Man

ufac

ture

6.

V-pa

ckin

g, 2

set

s

7.

Back

-up

Ring

, 2 e

ach

8.

Grea

se fi

tting

, 2 e

ach

9.

Bolt,

4 e

ach

(to h

old

split

ring

)

For P

rope

r Ope

ratio

n: W

ash

Thor

ough

ly w

ith W

ater

afte

r eac

h us

e an

d Gr

ease

Bea

ring

Appr

opria

tely

whi

le in

use


Crossover, InC.

2424

Rota

ry C

ircul

atin

g He

adw

/ Si

de S

wiv

el


Crossover, InC.

2525

Uppe

r & L

ower

Ke

lly V

alve

Safe

ty V

alve

Item

No

.Qu

an-

tity

Part

11

Body

21

Stem

-O-R

ing

31

Oper

atin

g St

em

42

Seat

O-R

ing

52

Seal

O-R

ing

61

Grea

se F

ittin

g

72

Seat

s

81

Ball

91

Body

O-R

ing

102

Seat

O-R

ing

112

Seal

Rin

g

121

Corr

ugat

ed S

prin

g

131

Sub

Item

No

.Qu

an-

tity

Part

11

Body

21

Grea

se F

ittin

g Ri

ng

31

Seat

41

Seat

Rin

g

51

Seat

O-R

ing

61

Oper

atin

g St

em

71

Stem

O-R

ing

81

Floa

ting

Inse

rt

91

Body

O-R

ing

101

Ball

111

Sprin

g

121

Sub


Crossover, InC.

2626

Insi

de B

OP


Crossover, InC.

2727

Drop-in Check ValveThe Drop-In Check Valve is easily installed. When backflow protection is desired, the valve may be added in any of the following ways. It there is no backflow, the valve is dropped into the open tool joint. The Kelly is then connected and the valve can be pumped into the landing sub. Once the valve has landed, no further action is required.

If backflow exists or is likely, a Kelly Valve or Safety Valve should be used. If a Lower Kelly Valve is to be used, close the kel-ly valve and remove the kelly. Stab the Drop-In Check Valve and make up the connection. It may be desirable to use a short sub or wash pipe between the kelly and the valve during this operation. Once the Kelly is made up, the Kelly valve should be opened as pumping is started. Pumping should be continued until the Drop-In Check Valve can be inserted between the swivel and the Upper Kelly Cock.

If pipe is being tripped and backflow is encountered, a safety valve may be used. Stab the open safety valve and make it up. Close the safety valve. Set the Drop-In Check Valve in the box of the safety valve. Stab and make up the Kelly over the Drop-In Check Valve. Open the safety valve as pumping is started. When the Drop-In Check valve is seated, pumping may be stopped and the pipe may be worked as necessary.

To recover the Drop-In Check Valve, trip the landing sub to the surface. Break the lower connection and unscrew the stop ring. When the stop ring is removed, the valve may be slipped out the pin end of the landing sub.

Parts ListItem No.

Part Name Check Valve Size

No. Req’d

1 Check Valve Assembly 1

2 Body 1

3 Nose Cap 1

*4 Valve Ball 1

5 Valve Spring 1

6 Jaws ▼

7 ✝ Slip Body Assembly 1

8 Slip Body 1

9 Thrust Washers 2

10 Thrust Washer Screws •

11 Jaw Nut 1

12 Set Screw, Hex Socket 1

13 Packer 1

14 Landing Sub 1

15 Stop Ring 1

*Recommended spare parts are: 1 ea.: item 4, item 13, and 2 ea: item 15.✝ Item 7 assembly include items 8, 9, and 10▼ Valve sizes #1 thru 9 require 3 Jaws, Valve sizes #10 thru 17 require four Jaws (see table 9 for valve sizes)•Valvesizes#1thru9require6screws,valvesizes#10thru17requireeight screws

Dimensional DataSize

#Check Valve OD

(in.)

Req’d Drill String ID

(in.)

Stop Ring ID

(in.)

Check Valve ID(in.)

1 1 11/16 .952 3/16

2 1 3/32 1 5/32 1.031 1/4

3 1 7/16 1 1/2 1.344 1/4

4 1 5/8 1 11/16 1.562 3/8

5 1 25/32 1 27/32 1.718 3/8

6 2 2 1/16 1.937 1/2

7 2 1/8 2 3/16 2.062 5/8

8 2 3/16 2 1/4 2.125 3/4

9 2 1/4 2 5/16 2.188 3/4

10 2 13/32 2 15/32 2.343 7/8

11 2 11/16 2 3/4 2.594 1 1/8

12 2 3/4 2 13/16 2.687 1 1/4

13 3 1/16 3 1/8 3.000 1 1/4

14 3 13/32 3 15/32 3.282 1 1/4

15 3 7/16 3 1/2 3.375 1 1/4

16 3 7/8 3 15/16 3.781 1 1/2

17 4 1/2 4 9/16 4.344 2 1/8

Valve AssembliesCheck Valve Size

Landing Sub Connection

Landing Sub – O.D. (in.)

Complete Assembly Part Number (Valve,

Sub & Stop Ring)

2 2 7/8” API-FH 4 1/4 17256-Y

4 2 3/8” API-IF 3 3/8 33830-Y

4 2 7/8” API-IF 4 1/8 45925-Y

4 3 1/2” API-IF 4 3/4 32131-Y

6 2 7/8” API-IF 4 1/8 31033-Y

6 3 1/2” API-IF 4 3/4 43708-Y

6 4 1/2” API-FH 5 3/4 43147-Y

6 6 5/8” API-REG. 7 3/4 43151-Y7 3 1/2” API-IF 4 3/4 43138-Y8 4 1/2” API-REG. 5 3/4 17252-Y

9 4 1/2” API-IF 6 3/8 44463-Y2

10 3 1/2” API-IF 4 3/4 31027-Y

10 4 1/2” API-FH 6 43147-Y2

10 4 1/2” API-IF 6 3/8 43142-Y2

10 6 5/8” API-REG 7 3/4 48598-Y

11 4” API-IF 5 1/4 46238-Y

11 5 1/2” API-FH 7 17226-Y-10

11 4 1/2” EXTRAHOLE 6 1/4 43144-AY2

11 4 1/2” API-IF 6 3/8 43139-Y2

11 5 1/2” API-REG. 6 3/4 17244-Y

12 4 1/2” API-IF 6 24453-Y2

13 4 1/2” EXTRAHOLE 6 1/4 32359-Y2

13 4 1/2” API-IF 6 3/8 43149-Y2

13 5 1/2” API-FH 7 43145-Y

13 6 5/8” API-REG 8 43150-Y2

14 4 1/2” API-IF 6 3/8 31039-Y2

14 5” EXTRAHOLE 6 3/8 31039-AY2

14 5 1/2” API-FH 7 17264-Y

14 6 5/8” API-REG 8 43598-Y2

15 6 5/8” API-REG 8 17246-Y2

Drop-In Check Valve

Landing Sub

How to Order the Drop -In Check Valve

Specify the following:

1. Check Valve Size

2.Size and Type of Landing Sub Connections Desired (fur-nished bos up and pin down unless otherwise specified).

3.Outside Diameter of Landing Sub Desired. The following are standard O.D.’s furnished for several popular connec-tions. Other O.D.’s are available on request.

Size O.D.3 1/2” API IF4 1/2” Extra Hole4 1/2” API IF5” Extra Hole

4 3/4”6”6 3/8”6 3/8”

4. Spare Parts: Recommended Spares are Noted in Parts List


Crossover, InC.

2828

Taper MillsCrossover taper mills utilize the smaller diameter, lower-mill end to enter a collapsed section of casing. Then, through a combination of spudding, rotating action, the carbide covered reamer-edges mill away the undersized section to full mill diameter. The taper mill is equally effective for deburring whipstock windows. Available in OD’s from 3 ¼” to 12 ½” and in 16” to 54” lengths.

The cutting surface is covered with cutting grade tungsten carbide in a nickel-silver matrix. This results in a sturdy, impact resistant tool. The cutting surface is self-sharpening for maximum useful life. The circulation ports are designed to efficiently remove the cuttings while cooling the cutting surfaces.

Crossover mills are simple and easy to use. Tag the fish and pick up 2-3 feet. Rotate at 80-120 RPM and lower slowly to contact fish. Continue rotating and apply approximately 2000# per inch of mill diameter. For example, an 8 ¼”OD mill would run with 2,000 x 8.25 = 16,500#. Please note that varying weight and rotary speed may improve results.

Junk MillsRugged Crossover junk mills make milling jobs easy even when cutting the toughest fish such as alloy-steel packers, squeeze tools, perfo-rating guns, drill pipe, tool joints, reamer blades, and rock bits. Crossover junk mills are available concave, convex, or flat bottom in various combinations of fishing necks and stabilizers. Any specific length neck, stabilizer, or combination of both may also be ordered. Available in all sizes with 4 to 8 blades in 10” to 64 lengths.

The cutting surface is covered with cutting grade tungsten carbide in a nickel-silver matrix. This results in a sturdy, impact resistant tool. The cutting surface is self-sharpening for maximum useful life. The circulation ports are designed to efficiently remove the cuttings while cooling and cutting surfaces.

Crossover mills are simple and easy to use. Tag the fish and pick up 2-3 feet. Rotate at 80-120 RPM and lower slowly to contact fish. Continue rotating and apply approximately 2000# per inch of mill diameter. For example, an 8 ¼ “ OD mill would run with 2,000 x 8.25= 16,500#. Please note that varying weigh and rotary speed may improve results.

Taper Millwith regular pin connection

Taper Millwith regular pin connection

and with fishing neck

Junk Mill


Crossover, InC.

2929

Pilot MillsCrossover pilot mills mill casing, liners, rotary shoes or large ID tubing at rates of up to 15ft./hr. Kulstrite covered blades are flat or slightly concave with self-sharpening features for longer life between dressings. They are available in all sizes.

Round-Nose Mills A 60 degree included taper on these short taper mills and Kulstrite covered spiraled reamer edges dress or clean out belled casing and liner, and require less weight and torque to do the job. Available in all sizes and in 16” to 34” lengths.

Skirted Mills Crossover junk mills are available with a skirt or guide sleeve to align the mill with the fish and keep it from rotating off the fish. Used when the top of the fish is split or distorted, the skirt or guide provides directionally stable cutting action and eliminates the possibility of casing damage. Available in all sizes.

Impact MillsCrossover impact mills are specifically designed to withstand the hammering action necessary to bust up rock bit cones. The large circula-tion ports provide circulation for both cutting removal and cooling. Available in all sizes.

When ordering mills or requesting a quote, please specify:1. OD of cutting edge

2. OD of body

3. Length

4. Connection

5. Application for which mill is to be used

Pilot Millsw/ fishing neck and stabilizer

Round Nose Mills Junk/Impact Millsw/ fishing neck and stabilizer

Skirted Mills


Crossover, InC.

3030

Reamer Watermellon MillCrossover Reamers/Watermelon Mills are excellent for reaming tight spots in casing. The have box-up and pin-down connections for run-ning in drill collar string. Slightly spiraled Reamer blades are toughened with Sintered Tungsten Carbide. They are available in all sizes.

Reamer/Watermelon Mill

The Crossover Safety JointThe Crossover Safety Joint is built tough to provide safe and easy release and make-up whenever disengagement becomes necessary. This tool was designed to transmit torque in either direction when placed in the drill, fishing and washover string.

A. In drill strings, the Crossover Safety Joint should be located above the drill collars to avoid compression

B. In Fishing Strings, the Crossover Safety Joint should be located just above the fish-ing tool, but below jar or bumper.

C. In Washover Strings, the Crossover Safety Joint should be located between the drill pipe and washover pipe. Crossover washover safety joints are provided with a tool joint box thread and a washover pin thread.

Operational Components The Crossover Safety Joint consists of a pin section, box section, and a friction ring. The internal connection of the safety joint is a coarse acme thread to facilitate easy backoff and reengagement. A knurled ring between the box and pin section maintains torsional integrity until backoff procedure is initiated. An O-ring seal contains pressure while the safety joint is made up.

OperationTo disengage to Crossover Safety Joint, place pipe in tension and apply left-hand torque. Hold torque while slowly lowering pipe until safety joints break. Continue to unscrew safety joint to the left.

To reengage the Crossover Safety Joint, lower pipe until top section of safety joint lands on box section. Apply one point of weight. Rotate left one or two turns. Then, rotate to the right until torque builds up indicating safety joint is made up.

Connection Size 2 3/8” 2 7/8”

Connection Type API IF API IF

OD of Joint 4 1/2” 4 1/2”

ID of Joint 2 7/8” 2 7/8”

Complete Assembly Number

DSJ-20 DSJ-21

Replacement Parts

Pin Section No. DSJ-20P DSJ-21P

Box Section No. DSJ-20B DSJ-21B

Friction Ring No. DSJ-20F DSJ-21F

O-Ring No. DSJ-20R DSJ-21R

Top Half

Friction Ring

Friction Pin

O-Rings

Lower Half

Drilling Safety Joint


Crossover, InC.

3131

Boot Baskets All Crossover junk/boot basket bodies are made from materials heat treated to drill collar specifications. All connections are protected by a phosphate surface coating to minimize galling on initial makeup.

Circulating Sub/SwageCrossover circulating sub/swages are manufactured from AISI 4140/4145

Junk / Boot BasketsJunk / Boot Basket Dimensional Data

Hole Size

Bit. Conn

Dia. (A)

Dia. (B)

Dia. (C)

Max Dia. (D)

Max Bore (E)

Overall Length

4 5/8 to 4 7/8 2 7/8 Reg. 4 2 5/8 4 3 15/32 1 1/4 37

5 1/8 to 5 5/8 3 1/2 Reg. 4 3/4 3 1/8 4 3/4 4 7/32 1 1/2 38

6 to 6 1/2 3 1/2 Reg. 5 3 1/4 5 4 1/2 1 1/2 38

6 1/2 to 7 1/2 3 1/2 Reg. 5 1/4 3 1/4 5 1/2 4 13/16 1 1/2 38

7 5/8 to 8 1/2 4 1/2 Reg. 6 3/4 4 1/2 6 5/8 5 2 1/4 38

8 5/8 to 9 1/2 4 1/2 Reg. 7 4 1/2 7 6 7/32 2 1/4 38

9 1/2 to 11 3/8 6 5/8 Reg. 8 5 3/4 8 5/8 7 7/16 2 13/16 39

11 1/2 to 13 6 5/8 Reg. 9 5 3/4 9 5/8 8 15/32 2 13/16 39

14 3/4 to 17 1/2 7 5/8 Reg. 10 7 10 3/4 9 5/8 3 40

All dimensions are given in inches, unless otherwise stated. Standard Junk basket is pin up-box down.

Other Sizes Available On Request


• Drill collar OD

• Size & type of upper con-nection

• Bit connection size & type

• Hole size

• Bore (E)

• Steel or pressed-steel thread protectors

Impression Blocks Crossover impression blocks have a soft lead bottom section which when set on top of the fish and string weight applied, an accurate indi-cation of the fish and location can be obtained. This allows the operator to select the correct fishing tool for the job there by saving costly trips in and out of the hole.

Impression Block Specifications

Size O.D. Top Connection - Pin Weight (lbs.)

1 5/8 15/16 - 10 5

1 3/4 15/16 - 10 6

2 1/8 15/16 - 10 7

2 1/4 3/4 S.R. 7

2 3/4 3/4 S.R. 15

3 1/2 3/4 S.R. 23

3 7/9 3/4 S.R. 36

4 1/8 2 3/8 Reg. 26

4 3/4 3 1/2 Reg. 57

5 1/2 3 1/2 Reg. 81

5 3/4 3 1/2 Reg. 83

8 4 1/2 Reg. 144

8 1/2 4 1/2 Reg. 144

11 1/2 6 5/8 Reg. 332

11 3/4 6 5/8 Reg. 312

When ordering Crossover impression blocks, please specify OD and the size & type of connection if other than stated


Crossover, InC.

32 32

Taper TapsCrossover taper taps are the most economical internal catch pulling tools for freeing stuck fish. Their hardened cutting teeth are machined on a shallow taper to provide an excellent catch for all types of downhole equipment.

Taper Taps are furnished either plain or threaded for skirts. If threaded, a skirt or oversized guide can be run if hole conditions require. Plain or fluted wickers are also available in standard sizes. Sizes range other than standard are available on request.

Die CollarsCrossover die collars are the most economical external catch tools for freeing stuck fish. The shallow-tapered, hardened teeth provide excellent engagement. Crossover die collars are available with plain or lipped bottom or threaded bottom for attaching a lipped guide.

Nominal Size In. 3 ½ F.H. 3 ½ I.F. 4 ½ D.S. 4 F.H. 4 ½ Reg. 4 ½ F.H. 4 ½ X.H. 4 ½ I.F. 5 ½ Reg. 5 ½ F.H. 5 ½ I.F. 6 5/8 Reg. 6 5/8 F.H.

Outside Dia. In. 4 5/8 4 ¾ 5 5 ¼ 5 ½ 5 ¾ 6 6 1/8 6 ¾ 7 7 3/8 7 ¾ 8

To Catch 3 ½ PIPE F.H.

3 ½ I.F. 3 ½ PIPE 4 ½ D.S. 4 F.H. 4 ½ REG.

4 I.F. 4 PIPE 4 ½ F.H. 4 ½

PIPE

4/12 X.H. 4 ½ I.F. 4 ½ PIPE

5 ½ or 5 9/16 REG.

5 ½ or 5 9/16 F.H. or PIPE

5 ½ or 5 9/16 I.F. or PIPE

6 5/8 Reg.

6 5/8 I.F. F.H. & PIPE

Total Length In. 29 29 29 32 32 32 32 32 34 34 34 34 34Dia. Smallest Wicker In. 15/8 2 3/16 2 5/16 2 5/16 1 ¼ 2 5/8 2 7/8 3 ¼ 2 ¼ 3 5/8 4 ¼ 3 45/8

Dia. Largest Wicker In. 3 1/8 3 11/16 3 13/16 3 15/16 3 3/8 4 ¼ 4 ½ 4 ¾ 4 5 3/8 6 4 ¾ 6 3/8

Complete Assembly No. Wt. lb TT-13 70 TT-14 82 TT-15 90 TT-16 96 TT-17

105TT-18 120

TT-19 126

TT-20 132

TT-21 164

TT-22 186

TT-23 198

TT-24 215

TT-25 242

ROTARY DIE COLLARS (Right or Left-hand available)

Nominal Size In. 1 ¼ PIPE

2 3/8 PIPE

2 3/8 UP-SET

2 3/8 API Reg.

2 3/8 API I.F.

2 7/8 PIPE

2 7/8 UP-SET

2 7/8 API

REG.

2 7/8 API I.F.

3 ½ PIPE

3 ½ UP-SET

3 ½ API Reg.

3/12 API F.H.

To Catch In. 1.660 2 3/8 2 21/32 3 1/8 3 3/8 2 7/8 3 7/32 3 ¾ 4 1/8 3 ½ 3 13/16 4 ¼ 4 5/8

Total Length In. 12 24 24 24 24 24 24 24 24 32 32 32 32

Outside Diameter In. 2 6/16 3 7/16 3 11/16 4 3/16 4 7/16 4 4 3/8 4 7/2 5 ¼ 4 ¾ 5 1/16 5 ½ 5 7/8

Dia. of Largest Wicker In. 1 7/8 29/16 2 13/16 3 5/16 3 9/16 3 1/16 3 7/16 3 15/16 4 5/16 3 ¾ 4 1/16 4 ½ 4 7/8

Dia. of Smallest Wicker In. 1 3/8 1 ¾ 2 2 ½ 2 ¾ 2 ¼ 2 5/8 3 1/8 3 ½ 2 5/8 2 15/16 3 3/8 3 ¾

With Plain or Lipped Bottom No. Wt. lb

DC-4 20 DC-5 30 DC-6 34 DC-7 43 DC-8 51 Dc-9 50 DC-10 59

DC-11 72

DC-12 81

DC-13 95

DC-14 107

DC-15 121

DC-16 132

Nominal Size In. 4 ½ API F.H.

4 ½ API I.F.

5 9/16 PIPE

5 9/16 UP-SET

5 9/16 API

REG.

5 916 API F.H.

5 9/16 API I.F.

6 5/8 PIPE

6 5/8 UP-SET

6 5/8 API

REG.

6 5/8 API F.H.

6 5/8 API I.F.

6 5/8 API

REG.

To Catch In. 5 ¾ 6 1/8 5 9/16 6 1/16 6 ¾ 7 7 3/8 6 5/8 7 1/8 7 ¾ 8 8 ½ 8 5/8

Total Length In. 36 36 42 42 42 42 42 42 42 42 42 42 42

Outside Diameter In. 7 1/8 7 ½ 7 1/16 7 9/16 8 ¼ 8 ½ 8 7/8 8 1/8 8 5/8 9 ¼ 9 ½ 10 10 ¾

Dia. of Largest Wicker In. 6 6 3/8 5 13/16 6 5/16 7 7 ¼ 7 5/8 6 7/8 7 3/8 8 8 1/4. 8 ¾ 9 ¾

Dia. of Smallest Wicker In. 4 5/8 5 3 15/16 4 7/16 5 1/8 5 3/8 5 ¾ 5 5 ½ 6 1/8 6 3/8 6 7/8 7 7/8

With Plain or Lipped Bottom No. Wt. lb

DC-21 212

DC-22 234

DC-23 237

DC-24 291

DC-25 310

DC-26 321

DC-27 338

DC-28 320

DC-29 340

DC-30 368

DC-31 380

DC-32 405

DC-33 399

To order, specify: (1)Nameandnumberofassembly•(2) Connection size and type if other than standard

Taper Taps (Right- hand or left-hand available)

Nominal Size In. 5/8 S.R. ¾ S.R. 1 13/16 W.F.J. 1 EUE 7/8 S.R. 1 ¼ EUE 2 3/8 EUE 2 3/8

REG. 2 3/8 I.F. 2 7/8 REG. 2 7/8 I.F. 3 ½ REG.

Outside Dia. In. 1 ½ 1 ¾ 1 13/16 1.9 2 5/16 2 3/8 3 1/16 3 1/8 3 3/8 3 ¾ 4 ¼ 4 ¼

To Catch In. ½ ID 1 ID 5/8 ID 1 1/4ID

¾ ID 1 3/8 ID 1 PIPE 7/8 ID 1

½ ID 1 ¼ PIPE2 3/8 OD PIPE &

CPL

2 3/8 REG.

2 3/8 PIPE I.F. HYD

I.F.

2 7/8 REG.

2 7/8 PIPE I.F.HYD.

I.F.3 ½ REG.

Total Length In. 16 18 18 18 20 20 23 23 23 23 23 29Dia. Smallest Wicker In. 3/8 ½ 5/8 ¾ ¾ 7/8 1 5/8 5/8 1 3/8 7/8 1 ¾ 1

Dia. Largest Wicker In. 1 ¼ 1 ½ 1 5/8 1 ¾ 1 ¾ 1 7/8 2 5/8 1 5/8 2 3/8 1 7/8 2 ¾ 2 ½

Complete Assembly No. TT-1 11 TT-2 12 TT-3 15 TT-4 16 TT-5 19 TT-6 20 TT-7 23 TT-8 24 TT-9 31 TT-10 36 TT-11 41 TT-12 56

Die Collar

Die Collar w/ Lipped Guide


Crossover, InC.

33 33

Casing Swedge, Rope Spear & Junk BasketsCasing Swedge

Crossover casing swedges are an economical method of repairing collapsed casing. The swedge can also be used as drift prior to running production tools to ensure no restriction down hole. The swedge has a shallow taper on the bottom end to allow for efficient swedging and a taper on the top for easy entry into tight spots on the return trip.

Crossover casing swedges have generous fluid passages milled helically in the body OD to ensure 360 degrees swedging and ease of trip-ping. It may be advisable on occasion to use multiple swedges with varying OD’s to return casing to usable size. For maximum effect and safety, Crossover recommends that these casing swedges be run using drill collars, bumper sub and jars.

Casing SwedgeWhen ordering or requesting a quote, please specify:

• Size & Weight of casing to be swedged

• Top Connection

• Fish Neck Diameter

• OD of Swedge

Rope Spear The Crossover rope spear is one of the most reliable and efficient tools of its type. The smallest tools, used for retrieving wireline, are of solid construction. The larger tools, for retrieving control line and rubber control line protectors, have a through bore for circulation pur-poses. These tools are utilized in offshore completion workover operations. The tools feature a simple design with barbs welded onto the shank.

Rope Spear

ODConnection

SizeFishing Neck Overall Length

Weight lbs.(Approx.)

3 3/82 3/8 IF 3 3/8 5’ 60

4 3/43 1/2 IF 4 3/4 6’ 70

6 1/24 1/2 IF 6 1/2 8’ 90

Stop plates for the rope spear are also available.Custom size are available.

When ordering or requesting a quote, please specify:• Tool size

• Casing size

• Connection, other sizes, etc.

• Stop plate size


Crossover, InC.

34 34

Core-Type Junk BasketThe Crossover core-type junk basket is a rugged junk fishing device, using either a mill shoe or flat bottom type shoe in conjunction with two sets of free revolving finger type catchers. The catchers are of rivetless construction. They may be easily redressed on the job, elimi-nating the necessity of returning them to the shop for replacement.

The upper catcher is designed to effectively break the core which is cut by the shoe. The fingers extend only halfway to the center. The lower catcher has alternately short and long fingers which extend almost to the center of the tool to effectively collect and retain odd pieces of junk or cores.

Alternate mill shoes available are the Type B and Type C. The Type B is similar to Type A in design, but with Sintered Tungsten Carbide dressing. The Type C is flat bottomed and dressed with Sintered Tungsten Carbide. Other shoe types are available.

Operation of the Crossover junk basket is simple, requiring only slow rotation and circulating fluid, to retrieve junk.

Core-Type Junk Basket

Hole Size (inches)

Barrel OD (inches)

Maximum OD of Fish (inches)

Head Size Range (inches)

Optional Magnet

Insert Weight

3 3/4 - 4 1/8 3 5/8 2 23/32 3 ¾-4 9

4 1/4 - 5 4 3 3/8 4 1/4-4 7/8 21

5 1/8 - 5 ½ 4 1/2 3 23/32 5 1/8 - 5 7/8 23

5 5/8-6 5 3/8 4 1/10 5 5/8 -5 7/8 32

6 5/8-7 6 1/4 4 13/16 6 5/8 - 6 7/8 57

7 1/4-8 6 7/8 5 15/16 7 1/4 - 7 7/8 65

8 1/4-9 8 1/8 6 3/16 8 1/4 - 8 7/8 76

9 1/4-10 8 7/8 7 3/16 9 1/4 - 9 7/8 115

10 1/4-11 9 7/8 8 1/16 10 1/4 - 10 7/8 167

11 1/4 -12 1/2 11 9 11 ¼ - 12 3/8 251

12 5/8-15 11 7/8 10 12 5/8 - 14 5/8 334

16-20 15 12 16-19 5/8 553

Type B- Mill Shoe Type C- Mill Shoe


Crossover, InC.

3535

Crossover, Inc. Reverse Circulating Junk Basket A major problem impeding drill operation is the accumulation of junk on the bottom of the well. Rock bit cones, bearings, broken slips, bits of wireline, various hand tools, slivers and debris from twisted-off drill strings, and mill cuttings are just some examples of the type of junk that can be recovered by any one of the Crossover junk recovery systems.

Reverse Circulation Junk Basket The reverse circulating junk basket (RCB) is a superior tool for removal of such items as slips, hand tools, and any other small pieces of junk form the well. The RC uses reverse circulation to aid in the recovery of debris.

Operational ComponentsThe RCB consists of a reversing sub with intergral ball seat and reversing valve, a barrel, jund catcher, and mill shoe.

The reversing valve on the RCB is a permanent part of the tool and requires no maintenance other than normal clean up between jobs.

Accessories Two types of shoes are available to fit the Crossover reverse circulation junk basket.

1. Type B shoe- This shoe has cutting teeth dressed with sintered tungsten carbide.

2. Type C shoe- This is a flat bottom shoe dressed with sintered tungsten carbide.

OperationThe junk basket is run into the hole. When bottom is reached, normal circulation is begun. The basket is slowly rotated. A ball is then dropped and pumped down to indicate circulation at the tool.

The coring action is then begun. This, combined with the reverse circulation, guarantees that any junk on the bottom is pumped up into the barrel and caught by the catcher assembly. The tool is removed from the hole after cutting 24 inches of core.


Crossover, InC.

3636

Washover PipeCrossover washover pipe has a two-step, double-shouldered thread joint with flush outside and inside diameters. This buttress-type thread assures quick makeup and high torsional strength. A wide assortment of sizes is available ranging from 3 ½” to 20”.

Washover Pipe and Design ConsiderationOD

(inches)Weight

(1lbs//ft.)ID

(inches)Joint Yield

(N-80) ft.-lb.Rec. Min. Hole Size

(inches)Rec. Max. Fish OD

(inches)3 1/2 9.2 2.992 3,000 3 1/4 2 11/16

3 3/4 9.5 3.25 3,000 4 1/8 2 7/8

4 11 3.476 3,500 4 1/2 34 11.6 3.428 4,000 4 1/2 3 1/16

4 14 3.34 5,000 4 1/2 34 15.7 3.24 6,000 4 1/2 2 7/8

4 1/2 13.5 3.92 5,000 4 3/4 3 1/2

4 1/2 15.1 3.826 7,000 4 3/4 3 3/8

4 3/4 16 4.082 7,000 5 1/4 3 5/8

5 15 4.408 7,000 5 3/4 4 1/4

5 18 4.276 9,000 5 3/4 4 1/8

5 3/8 19.5 4.669 10,000 6 4 1/4

5 1/2 17 4.892 9,000 6 1/8 4 3/4

5 1/2 20 4.778 11,000 6 1/8 4 5/8

5 1/2 23 4.67 13,000 6 1/8 4 1/2

5 1/2 26 4.548 16,000 6 1/8 45 3/4 18 5.126 11,000 6 7/8 4 7/8

6 20 5.352 12,000 7 5 1/8

6 23 5.24 14,000 7 5 1/8

6 3/8 24 5.625 16,000 7 5 5/8

6 3/8 28 5.499 20,000 7 56 5/8 24 5.921 16,000 7 3/8 5 5/8

6 5/8 28 5.791 20,000 7 3/8 5 5/8

6 3/4 35 5.71 25,000 7 1/2 5 5/8

7 26 6.276 18,000 7 7/8 6 1/8

7 29 6.184 21,000 7 7/8 67 32 6.094 23,000 7 7/8 5 7/8

7 3/8 29 6.625 20,000 7 7/8 6 1/2

7 5/8 29.7 6.875 23,000 8 5/8 6 3/4

7 5/8 33.7 6.765 27,000 8 5/8 6 1/2

7 5/8 39 6.625 32,000 8 5/8 6 1/2

8 31 7.25 24,000 8 1/2 7 1/8

8 1/8 32 7.385 24,000 8 5/8 7 1/8

8 1/8 32.5 7.375 25,000 8 5/8 7 1/8

8 1/8 35.5 7.285 30,000 8 5/8 78 1/8 39.5 7.185 35,000 8 5/8 6 7/8

8 7/16 35.5 7.626 30,000 9 1/2 6 1/2

8 5/8 36 7.825 32,000 9 5/8 7 3/4

8 5/8 40 7.725 35,000 9 5/8 7 3/8

8 5/8 44 7.625 40,000 9 5/8 6 1/2

9 40 8.15 35,000 9 7/8 89 5/16 38 8.535 35,000 10 8 1/4

9 5/8 40 8.835 40,000 10 1/2 8 1/2

9 5/8 43.5 8.755 45,000 101/2 8 3/8

9 5/8 47 8.681 50,000 10 1/2 8 3/8

9 5/8 53.5 8.535 60,000 10 1/2 8 1/8

10 3/4 45.5 9.95 50,000 11 3/4 9 3/4

10 3/4 51 9.85 60,000 11 3/4 9 1/2

10 3/4 55.5 9.76 65,000 11 3/4 9 3/8

11 3/4 54 10.88 65,000 12 3/4 10 1/2

11 3/4 60 10.772 80,000 12 3/4 10 3/8

13 3/8 61 12.515 100,000 14 3/8 12 1/8

13 3/8 72 12.347 110,000 14 3/8 11 3/4

16 109 15.01 150,000 17 1/2 14 1/2

18 5/8 96.5 17.655 180,000 20 17 1/4

20 94 19.12 200,000 23 18 7/8

Washover Pipe


Crossover, InC.

3737

Rotary Shoes

Type B rotary shoe is used inside casings to washover on a fish

without damaging the casing. It cuts on the bottom only.

Type C rotary shoe is used inside casing & cuts on the bottom only. It is designed not to damage the

casing or the fish.

Type D rotary shoe is designed to cut formation only. It only cuts on

the OD and bottom.

Type E rotary shoe is designed to use inside casing and to cut metal

on a fish. It cuts on the ID and bottom.

Type F rotary shoe is designed to use inside casing and to cut soft formations as it only cuts on the

bottom.

Type M rotary shoe is designed for use in an open hole to cut forma-

tion, cement, and metal where clearances inside the hole are lim-ited. It cuts on the ID and bottom.

Type N rotary shoe is designed for use inside casing to dress and size the fish. It cuts on the OD and

bottom.

Type P rotary shoe is designed to cut formations, metal, and cement. It cuts on the OD, ID, and bottom.

Type R rotary shoe is designed for use in an open hole to cut forma-

tion, cement, and metal. It cuts on the OD and bottom.

Type S rotary shoe is designed to cut metal in the fish without dam-age to the casing. It cuts on the ID

and bottom.

Type T rotary shoe is designed for use in an open hole to cut metal, cement, and formation. It cuts on

the OD, ID, and bottom.

Type Z rotary shoe is designed for use inside casing to cut metal on the fish. It cuts on the ID and

bottom.


Crossover, InC.

Washover Safety JointsThe Crossover washoover safety joint is used in connecting drill pipe to your washover string. It provides a dependable means of releasing the drill pipe from the washover pipe if the washover string becomes stuck.

The lower half of the washover safety joint remains with the washpipe when parted and is full bore to match the washpipe, making subsequent re-entry of other tools pos-sible. A coarse pitch safety thread, in combination with the friction ring, assures prpoer release when required.

Washover safety joints are made from heat treated alloy steel and are stronger than the pipe that they are designed to run on.

The safety joint should be made up properly in the string. This is done by making up the lower half into the washpipe. Make up the top half into the lower half with the same torque as applied to the washpipe connections.

To release the safety joint, bump down sharply on the safety joint with drill striing while holding a safe, left hand torque. Raise the string slowly while maintaining torque. The upper half will unscrew from the lower half, and the friction ring will remain with the retrieved upper half.

‘To re-engage the joint, carefully feel for contact with the lower half, then appply a small amount of weight. Make one revolution to the left, then turn slowly to the right, while maintaining the small amount of weight. An increase in torque will signify that the joint has made up.

3838

Washover Safety Joint SpecificationsWashover Pipe Size (inches)

Tool Joint Size

(inches)

Washover Pipe

Thread

Max. OD of Tool

(inches)

Min. ID of Tool

(inches)

Length (inches)

Approximate Weight (lbs.)

5 3/8 To Order 5 3/8 2 1/8 36 1175 3/4 To Order 5 3/4 2 11/16 36 119

7 To Order 7 3/8 3 39 1/2 2397 3/8 To Order 7 1/2 3 39 1/2 2487 5/8 To Order 8 3 3/4 41 5/8 257

8 To Order 8 1/8 3 3/4 40 5/8 2628 1/8 To Order 8 1/4 3 41 2928 5/8 To Order 8 3/4 2 3/4 41 1/2 366

9 To Order 9 3/8 2 3/4 41 1/2 4219 5/8 To Order 10 1/8 2 3/4 41 1/2 501

10 3/4 To Order 11 1/4 3 1/2 46 3/4 63611 3/4 To Order 12 3 1/2 46 1/2 689


Crossover, InC.

Lift PlugsCrossover lift plugs are designed to give an efficient method of handling washover strings and have a sufficient shoulder diameter to sup-port handling of the washover string. They are available in all thread types and sizes.

3939

Lift Plug SpecificationsWashpipe

Shoulder OD (inches)FJWP Connection

Weight (lbs.)

Size (inches)

Length (inches)Plain With Ball

Plain With Ball

4 1/2 6 12 5 7 84 3/4 6 12 1/2 5 3/8 10 11

5 6 13 5 9/16 14 155 1/2 6 13 1/2 6 1/8 9 105 3/4 6 13 3/4 6 1/2 9 10

6 6 14 6 5/8 12 136 5/8 6 14 1/2 7 7/16 12 13

7 6 14 13/16 8 13 147 5/8 6 17 8 5/8 14 158 1/8 6 18 9 3/32 18 198 5/8 7 19 9 5/8 22 23

9 7 19 1/2 10 29 309 5/8 7 20 10 5/8 32 3310 3/4 7 21 11 3/4 36 3711 3/4 7 21 12 3/4 40 4113 3/8 7 21 14 3/4 46 47

When ordering or requesting a quote, please specify:• Type of connection if other than standard

• OD of shoulder if other than standard

Crossover Lift Plugs


Crossover, InC.

4040

Crossover Casing Rollers

Use The CROSSOVER CASING ROLLER is used specifically to recondi-tion and restore buckled, collapsed or dented tubing and casing to their normal internal diameter and roundness. It is designed to enter into the smaller I.D. of the damaged casing. As it is rotated and forced downward, it exerts lateral pressure on the casing to restore it to its normal I.D.

CONSTRUCTION CROSSOVER CASING ROLLERS are manufactured from alloy steels selected for their ability to resist wear.

The Roller consist of an eccentric Mandrel upon which are mounted a series of Rollers and a tapered Nose Cone. The upper end of the Mandrel is fitted with a threaded box connection for connection to the drill pipe. The tapered Nose Cone locks all Rollers in place on the Mandrel by large ball bearings running in deep grooves in the Mandrel and the Nose Cone.

The design of the Roller permits the use of interchangeable Roll-ers to be used on each size Mandrel. The large bearing areas between the Rollers and the eccentrics effectively reduce bearing pressures, therefore increasing tool life.

OPERATION Moderate to heavy weight should be applied during operation. The use of too little weight, with high rotational speeds should be avoided. Light weight with high speeds tends to wear the rollers without straightening the pipe. If insufficient weight is available in the running string, drill collars should be added. The best guide to the amount of weight and rotational speed to use is experience; as long as steady downward progress is made by the Casing Roller, the weight speed ratio is giving the proper results.

Badly damaged casing will require the maximum amount of weight for the Roller to enter into and straighten the casing. The rugged construction of the Crossover Casing Roller allows the operator to apply the maximum amount of weight and torque without damage to the tool.

CIRCULATION MUST BE MAINTAINED DURING THE OPERATION.


Crossover, InC.

4141

Casing Size

Wt. Drift

DiameterRoller OD

Nose Cone ODUpper Middle Lower

5” 11.5 4.500 4.250 4.250 4.250 3.1255” 13.0 4.438 4.250 4.114 4.250 3.1255” 15.0 4.343 4.000 4.192 4.250 3.1255” 18.0 4.218 4.000 3.965 4.250 3.125

5 1/2” 14.0 4.950 4.662 4.738 4.662 3.7505 1/2” 15.5 4.888 4.609 4.666 4.609 3.7505 1/2” 23.0 4.608 4.359 4.358 4.359 3.750

7” 23.0 6.304 6.000 6.108 6.000 5.5007” 26.0 6.214 5.830 6.094 5.830 5.5007” 29.0 6.122 5.830 5.910 5.830 5.5007” 32.0 6.032 5.734 5.830 5.734 5.500

7 5/8” 29.7 6.812 6.188 6.682 6.188 5.3757 5/8” 39.0 6.563 6.188 6.188 6.188 5.375

Material: Mandrel, Rollers & Nose Cone AISI 4130, 4140/4145 Heat Treated


Crossover, InC.

4242

Cros

sove

r Gra

vel P

ack

Tool

Cup

Type

Cr

osso

ver G

rave

l Pac

k To

ol


Crossover, InC.Casing Scrapers

Crossover Inc. Casing Scrapers are used to clean mud, rust, mill scale, cement, paraffin, burrs, and any other foreign material from inside the casing walls. Crossover Casing Scrapers are manufactured from Heat Treated Alloy Steel. The Scraper blades are arranged for complete 360 degree coverage in rotation or reciprocation. Recommend both when scarping burrs such as perforation holes.

4343

Casing Scraper Specifications

Nominal Size

Casing Range(inches)

API Reg. Connection

Length (inches)

Bore (inches)

Tool Weight (lbs.)

Crated Weight (lbs.)

BA-200 2 3/8 1 13/16 24 1/2 12 17

BA-250 2 7/8 thru 3 1/2 1 13/16 27 1/2 21 28

BC-500 4 1/2 thru 5 2 3/8 30 1/4 1 70 80

BC-550 5 1/2 thru 6 2 7/8 33 3/4 1 1/4 97 107

BC-700 6 5/8 thru 7 5/8 3 1/2 37 1 1/2 152 170

BA-900 8 5/8 thru 13 3/8 4 1/2 42 1/2 2 1/4 354 396

BA-1000 10 3/4 thru 13 3/8 6 5/8 50 3 1/2 480 525

Special Sizes Also AvailablePatented Casing Scraper


Crossover, InC.

4444

Type F BOP Cup TesterCrossover cup testers are standard and made of high quality alloy steel and elastomers. When assembled with the appropriate cup for the casing weight range, test pressures up to 10,000 psi may be applied.

Cup tester is attached to drill pipe and lowered into the casing below the wellhead to pressure test the annular blowout preventer and the wellhead.

Cup Tester Technical DataAssembly Number

Mandrel SizeBox xPin

Casing Sizein / mm

Casing Wt. Range

lb / ft

Total Load Capacity

b/k\g

Cup Pressure Area

sq in / sq mm

Cup Part Number

30594-01 2.375” IF 4.500 / 114 9.5 / 15.1 270,000 / 122,471 9.5 / 6129 30591

30594-02 2.375” IF 5.000 / 127 15.0 / 23.0 270,000 / 122,471 12.4 / 8000 30592

30594-03 2.375” IF 5.500 / 140 14.0 / 23.0 270,000 / 122,471 16.0 / 10,323 30593

30605-01 3.500” IF 6.625 / 168 17.0 / 32.0 500,000 / 226,799 18.6 / 12,000 30597

30605-02 3.500” IF 7.000 / 178 17.0 / 26.0 500,000 / 226,799 23.5 / 15,161 30598-02

30605-03 3.500” IF 7.000 / 178 29.0 / 38.0 500,000 / 226,799 20.4 / 13,161 30598-01

30605-04 3.500” IF 7.625 / 194 24.0 / 26.4 500,000 / 226,799 28.8 / 18,581 30599-01

30605-05 3.500” IF 7.625 / 194 29.7 / 39.0 800,000 / 226,799 27.5 / 17,742 30599-02

30600-04 4.500” IF 8.625 / 219 40.0 / 49.0 800,000 / 362,878 29.4 / 18.968 30606-01

30600-01 4.500” IF 9.625 / 244 32.3 / 40.0 800,000 / 362,878 44.1 / 28,452 306001-01

30600-02 4.500” IF 9.625 / 244 43.5 / 53.5 800,000 / 362,878 42.4 / 27,355 30601-02

30600-05 4.500” IF 10.750 / 273 32.75 / 51.0 800,000 / 362,878 63.8 / 41,161 30607-01

30600-06 4.500” IF 10.750 / 273 55.5 / 65.7 800,000 / 362,878 58.9 / 38,000 30607-02

30600-07 4.500” IF 13.375 / 340 48.0 / 61.0 800,000 / 362,878 109.5 / 70,645 30579-02

30600-08 4.500” IF 13.375 / 340 68.0 / 72.0 800,000 / 362,878 103.3 / 66,645 30584

30600-09 4.500” IF 16.000 / 406 55.0 / 84.0 800,000 / 362,878 165.0 / 106,451 374819

30600-12 4.500” IF 18.625 / 473 87.5 800,000 / 362,878 230.0 / 148,387 30598-02

30600-10 4.500” IF 20.000 / 508 94.0 / 133.0 800,000 / 362,878 300.0 / 193,548 33543

Only the most popular sizes are shown in the table above.

• Cups are interchangeable

• Element rating compatible with casing

• Mandrel and sub come standard with IF threads

• Manufactured in accordance with API and ISO standards

When ordering or requesting a quote, please specify;• Assembly Number or Specify OD

• Connection Specification

• Working Pressure

• Type of Service


Crossover, InC.

Pressure Control

4545

Wireline Lubricator Blanking Plugs

Integral Wireline Lubricator Rise

Wireline Lubricator Bleed Sub

Wireline Lubricator Union

Wireline Lubricator Riser

Product Catalog for Crossover

Documents

Transcript of Product Catalog for Crossover