PRODUCT CATALOG Catalog.pdf · PVC FLUSH THREAD MONITOR WELL SCREENS AND CASINGS Well screens and...
Transcript of PRODUCT CATALOG Catalog.pdf · PVC FLUSH THREAD MONITOR WELL SCREENS AND CASINGS Well screens and...
ATLANTIC SCREEN & MANUFACTURING, INC.
ATLANTIC SCREEN, INC PHONE: 302-684-3197 142 BROADKILL ROAD FAX: 302-684-0643 MILTON, DE 19968 [email protected] 2019 www.atlantic-screen.com
PRODUCT CATALOG
www.atlantic-screen.com
Products For:
• Water Wells, Vapor & Recovery
• Petroleum Inspection Wells, Methane Relief, Soil
Vapor Extraction, Leachate Collection
• Groundwater Monitoring, Testing
• Sampling Equipment, Bailers, Pumps
• Dewatering, Irrigation, Remediation
• Instrumentation, Manholes
• Geotechnical Products
• Landfill & Construction, Horizontal Drilling
• Pond Risers, Filtration, Pump Strainers
• Mining, Underdrains, Diffusers
• Cathodic Protection such as under tank reference
electrode access, slotted vent pipe
Certified WBENC Women's Business Enterprise
ATLANTIC SCREEN & MANUFACTURING, INC.
ATLANTIC SCREEN, INC PHONE: 302-684-3197 142 BROADKILL ROAD FAX: 302-684-0643 MILTON, DE 19968 Page 0 [email protected] 2019 www.atlantic-screen.com
ATLANTIC SCREEN & MANUFACTURING, INC.
TABLE OF
Above Ground Well Protectors . . . . . . . . . . . . 43 Aluminum Manhole . . . . . . . . . . . . . . . . . . . . . 53 Auger Plugs . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 Bailer Cord, Teflon Coated Cable Reels . . . . 37 Bailers, Sampling . . . . . . . . . . . . . . . . . . . . . 34-40 Benseal . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . 64 Bentonite Pellets . . . . . . . . . . . . . . . . . . . . . . 64 Bronze Back Pressure Valves . . . . . . . . . . . . . 31 Centralizers . . . . . . . . . . . . . . . . . . . . . . . . . . . 29 Claims and Damages . . . . . . . . . . . . . . . . . . . 2 Clear PVC Pipe . . . . . . . . . . . . . . . . . . . . . . . . . 30 Credit Application . . . . . . . . . . . . . . . . . . . . . . 4 Dewatering Screens . . . . . . . . . . . . . . . . . . . . 18 Direct Push Liners . . . . . . . . . . . . . . . . . . . . . . 32 Double Locking Packer . . . . . . . . . . . . . . . . . . 56 Drain Sock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58 Elevators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 Ex-Cap Sampling Air & Fluids . . . . . . . . . . . . . 43 Filter Sock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58 Manholes-Aluminum, Steel, Composite . . . 46-53 Fluid Level Measurement in Storage Tanks . 61 Flush Joint Screens & Casing . . . . . . . . . . . . . 5-13 Glue, Primer, Cleaner . . . . . . . . . . . . . . . . . . . 32 Gravel Pack Well Screen . . . . . . . . . . . . . . . . 16 Groundwater Sampling Bailers, Filters . . . . . 36 Hazmat Absorbents . . . . . . . . . . . . . . . . . . . . . 59 Header Valve Assembly . . . . . . . . . . . . . . . . . 18 Holeplug . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64 In-Line Static Mixer . . . . . . . . . . . . . . . . . . . . . 67 Internal Pipe Cutters . . . . . . . . . . . . . . . . . . . 24 Jet Point . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 Jet Pump Packer Adapter . . . . . . . . . . . . . . . 63 K-Packer, Tri Seal . . . . . . . . . . . . . . . . . . . . . . 55 Liqui-Nox, Alconox Detergents. . . . . . . . . . . 68 Liquid/Vapor Piezometers . . . . . . . . . . . . . . 17 Locking Plugs, Caps . . . . . . . . . . . . . . . . . . . . . 44-45 Locks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44 Morrison Manholes . . . . . . . . . . . . . . . . . . . . . 46 Non-Lock and Locking Plugs . . . . . . . . . . . . . 44-45
CONTENTS
Oil Only Absorbents . . . . . . . . . . . . . . . . . . 57 Oil Water Interface Probe . . . . . . . . . . . . . 61 Order Form . . . . . . . . . . . . . . . . . . . . . . . . . 3 Pemco Manholes . . . . . . . . . . . . . . . . . . . . 47-53 Perforated Pipe Request for Quote. . . . . . 11 Porous Pipe . . . . . . . . . . . . . . . . . . . . . . . . 12 Observation Wells, Canal/Lake Screens. . . 17 Pipe Specifications . . . . . . . . . . . . . . . . . . . . 66 Point Source Bailer . . . . . . . . . . . . . . . . . . . 39 PVC Pipe Clamps . . . . . . . . . . . . . . . . . . . . . 19 PVC Slip Fittings . . . . . . . . . . . . . . . . . . . . . 26-27 PVC Soil Test Points . . . . . . . . . . . . . . . . . . 28 PVC Vee-Wire Screens . . . . . . . . . . . . . . . . 20 Quickgel . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64 Sand Blasting Sand 00 & 000 . . . . . . . . . . . 65 Sand Separators . . . . . . . . . . . . . . . . . . . . . . 69 Sand Shaker . . . . . . . . . . . . . . . . . . . . . . . . . . 24 Sand Sharks (Wash Down Valves) . . . . . . . 31 Screens – Slotted PVC, CPVC, HDPE . . . . . 5-13 Shale Traps . . . . . . . . . . . . . . . . . . . . . . . . . . 54 Slotted Pipe Bid Request . . . . . . . . . . . . . . 13 Slotted Screens w/point or open end . . . 25 Slugs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 Soda Ash . . . . . . . . . . . . . . . . . . . . . . . . . . 64 Stainless Steel Screens . . . . . . . . . . . . . . . . 21-23 Submersible Pump Protectors . . . . . . . . . 62 Suction Strainer . . . . . . . . . . . . . . . . . . . . . 63 Surge Block . . . . . . . . . . . . . . . . . . . . . . . . . 28 Swing Arm w/ball valve . . . . . . . . . . . . . . . 18 Tank and Drum Samplers . . . . . . . . . . . . . 35 Tubing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41-42 Variable Capacity Bailer . . . . . . . . . . . . . . 40 Warranty – Terms of Sale . . . . . . . . . . . . 1 Wash Down Valves (Sand Sharks) . . . . . . . 31 Washed Well Gravel . . . . . . . . . . . . . . . . . . 65 Water Level Indicator . . . . . . . . . . . . . . . . . 60 Well Depth Indicator . . . . . . . . . . . . . . . . . 60-61 Well Screen Products Comparison Guide . 15 Well Seal Vent, Well Seals . . . . . . . . . . . . . . 62
ATLANTIC SCREEN & MANUFACTURING, INC.
ATLANTIC SCREEN, INC PHONE: 302-684-3197 142 BROADKILL ROAD FAX: 302-684-0643 MILTON, DE 19968 [email protected] 2019 www.atlantic-screen.com
ATLANTIC SCREEN & MANUFACTURING, INC.
ATLANTIC SCREEN, INC PHONE: 302-684-3197 142 BROADKILL ROAD FAX: 302-684-0643 MILTON, DE 19968 Page 2 [email protected] 2019 www.atlantic-screen.com
ATLANTIC SCREEN & MANUFACTURING, INC.
ATLANTIC SCREEN, INC PHONE: 302-684-3197 142 BROADKILL ROAD FAX: 302-684-0643 MILTON, DE 19968 Page 3 [email protected] 2019 www.atlantic-screen.com
Order Date: ______________________________
Customer #: ______________________________ Purchase Order # _______________________
BILL TO: SHIP TO:
Contact: __________________________________ Contact: ______________________________ __________________________________________ ______________________________________ __________________________________________ ______________________________________ __________________________________________ ______________________________________ Date Needed: ____________________________ Delivery Site Phone #: ___________________
Shipping Preference: LTL Carriers Preference ? ___________________
UPS: Next Day 2nd Day 3rd Day Ground FEDEX: Priority Standard Truck
UPS #, if Applicable _________________________ FEDEX #, If Applicable _________________________
Quantity Cat. No. Item Description Unit Price Total Price
* Total DOES NOT include shipping
TOTAL* METHOD OF PAYMENT:
Bill our account (net 30 days) C.O.D.
Visa / Mastercard / AMX____________________________________ Cardholder _______________________________________________ Exp Date _____________ Signature: __________________________
Wire Transfer ____________________________________________
ATLANTIC SCREEN & MANUFACTURING, INC.
ATLANTIC SCREEN, INC PHONE: 302-684-3197 142 BROADKILL ROAD FAX: 302-684-0643 MILTON, DE 19968 Page 4 [email protected] 2019 www.atlantic-screen.com
APPLICATION FOR CREDIT Company: _________________________________________________________ Years in Business: _________ Billing Address: ______________________________________________________________________________ Shipping Address: ____________________________________________________________________________ Business Phone: _______________________ Fax: ____________________ Email: _______________________ Check One: Corporation Partnership Sole Proprietorship President ________________________________ Vice President ____________________________________ Phone: _________________________________ Phone: _______________________________________ Email: _________________________________ Email: _______________________________________
Office Contact: ____________________________________ Authorized Buyer: __________________________________________ Phone: _________________________________________ Phone: ________________________________________________ Email: __________________________________________ Email: ________________________________________________
Authorized Buyer: __________________________________ Authorized Buyer: __________________________________________ Phone: __________________________________________ Phone: ________________________________________________ Email: __________________________________________ Email: _________________________________________________ Bank Reference Bank Name: __________________________________________ Account Number: _______________________________ Address: ____________________________________________________________________________________________ Contact Person: __________________________________ Phone: _______________________ Fax: __________________
Trade References Company: ______________________________________________________ Account Number: _______________________________ Address: ______________________________________________________________________________________________________ Contact Person: ______________________________________ Phone: _________________________ Fax: ______________________ Company: ______________________________________________________ Account Number: _______________________________ Address: ______________________________________________________________________________________________________ Contact Person: ______________________________________ Phone: _________________________ Fax: ______________________
Company: ______________________________________________________ Account Number: _______________________________ Address: ______________________________________________________________________________________________________ Contact Person: ______________________________________ Phone: _________________________ Fax: ______________________
GENERAL PROVISIONS & AUTHORIZATION
Applicant agrees that in addition to paying the full purchase price of all merchandise ordered from creditor, applicant will pay a service charge of 18 percent per annum on any unpaid balance existing 30 days after the date of invoice from creditor. In the event that any legal action is instituted to collect any unpaid balance owing from applicant, the prevailing party in such action shall be entitled to recover its reasonable attorney fees and costs in addition to any other recovery by such party. Applicant will notify us in writing if their business changes status in any way, (i.e. new owner, change in banks, credit references and/or trade references listed herein and further allowances listed herein and further authorizes said banks, credit references and/or trade references to provide information requested by creditor in order to evaluate this application. CORPORATION PARTNERSHIP/ PROPRIETORSHIP _________________________________________ ___________________________________
Date Date _________________________________________ ___________________________________
Print Name of Corporation Print Name of Firm _________________________________________ ___________________________________
Signature of Officer Signature of Partner/Owner Attach FORM W-9 Request for Taxpayer Identification Number
ATLANTIC SCREEN & MANUFACTURING, INC.
ATLANTIC SCREEN, INC PHONE: 302-684-3197 142 BROADKILL ROAD FAX: 302-684-0643 MILTON, DE 19968 Page 5 [email protected] 2019 www.atlantic-screen.com
PVC FLUSH THREAD MONITOR WELL SCREENS AND CASINGS
Well screens and casings custom manufactured by Atlantic Screen and Manufacturing, Inc., conform to ASTM F-480: “Standard Specification for Thermoplastic Well
Casing Pipe and Couplings Made in Standard Dimension Ratios (SDR), SCH 40 and SCH 80.” PVC materials used to produce the raw PVC pipe shall meet ASTM standard D-1784: “Specification for Rigid Poly (Vinyl Chloride) (PVC) Compounds and Chlorinated Poly (Vinyl Chloride) (CPVC) Compounds for PVC Normal
Impact, Type 1 Grade I (1120), cell classification 12454-B.”
Chart Key: (S) Standard, (O) Optional
Diameters Standard Lengths SCH 40 Threads per inch Slot Widths IEnds Available Spacing of Slots
2.5 5' 10' 20' 2TPI 4TPI 8TPI PLUG POINT 1/8” 1/4” 3/16'
1/2” S S S N/A S .006 500* O N/A S O O
3/4” S S S N/A S .006 500* O N/A S O O
1” S S S S S .006 500* O O S O O
1-1/4” S S S S S O .006 500* O O S O O
1-1/2” S S S S O S ..006 500* O O S O O
2” S S S S S O O .006 500* O O S O O
2-1/2” S S S S S O O .006 500* O N/A S O O
3” S S S S S O O .006 500* O O S O O
4” S S S S S O O .006 500* O O S O O
5” S S S S S O O .006 500* O N/A S O O
6” S S S S S O O .006 500* O N/A O S O
8” S S S S S .015 500* O N/A N/A S N/A
10” S S S S S .020 500* O N/A N/A S N/A
12” S S S S S .020 500* O N/A N/A S N/A
14” S S S S S .050 500* O N/A N/A S N/A
16”&24” S S S S S .060 500* O N/A N/A S N/A
Diameters Standard Lengths SCH 80 Threads per inch Slot Widths Endss Available Spacing of Slots
2.5 5' 10' 20' 2TPI 4TPI 8TPI PLUG POINT 1/8” 1/4” 3/16”
1/2” S S S N/A S .006 500* O N/A S O O
3/4” S S S N/A S O .006 500* O N/A S O O
1” S S S S S O .006 500* O O S O O
1-1/4” S S S S S O .006 500* O O S O O
1-1/2” S S S S S O O .006 500* O O S O O
2” S S S S S O O .006 500* O O S O O
2-1/2” S S S S S O O .010 500* O N/A S O O
3” S S S S S O O .010 500* O O S O O
4” S S S S S O O .010 500* O O S O O
5” S S S S S O O .015 500* O N/A S O O
6” S S S S S O O .020 500* O N/A O S O
8” S S S S S .020 500* O N/A N/A S N/A
10” S S S S S .020 500* O N/A N/A S N/A
12” S S S S S .030 500* O N/A N/A S N/A
14” S S S S S .050 500* O N/A N/A S N/A
16”&24” S S S S S .060 500* O N/A N/A S N/A • CUSTOM SLOT WIDTHS AND PATTERNS ARE AVAILABLE UPON REQUEST. CALL FOR QUOTE.
Standard flush thread PVC screens and casings are male flush thread x female flush thread. Available fittings include flush thread plugs, points
and wash-down valves (WVD). National pipe thread (NPT) and open end is also available. Open end screens are available from 1/2” thru 24”.
ATLANTIC SCREEN & MANUFACTURING, INC.
ATLANTIC SCREEN, INC PHONE: 302-684-3197 142 BROADKILL ROAD FAX: 302-684-0643 MILTON, DE 19968 Page 6 [email protected] 2019 www.atlantic-screen.com
Solid Stock Bull Nose 4 Thread per inch 3B4TPI 3" 4B4TPI 4"
FLUSH THREAD PVC SCREEN AND CASING
ATLANTIC SCREEN & MANUFACTURING, INC.
ATLANTIC SCREEN, INC PHONE: 302-684-3197 142 BROADKILL ROAD FAX: 302-684-0643 MILTON, DE 19968 Page 7 [email protected] 2019 www.atlantic-screen.com
FLUSH THR
SCHEDULE 40 A Casing & Scre Specify Scree
1/2” PVC - 8 TPI
ITEM # SCH40
ITEM # SCH80
Length Description Pcs Per Box
PTC5014 PTC5018 1' Casing 30
PTC502.54 PTC502.58 2-1/2' Casing 30
PTC5054 PTC5058 5' Casing 30
PTC5104 PTC5108 10' Casing 30
PTC5204 PTC5208 Casing
PTS5014 PTS5018 1' Screen 30
PTS502.54 PTS502.58 2-1/2' Screen 30
PTS5054 PTS5058 5' Screen 30
PTS5104 PTS5108 10' Screen 30
PTS5204 PTS5208 Screen
ORING50 ORING05 - O-ring -
PTCA50 PTCA5080 - Threaded Cap -
PTP50 PTP5080 - Threaded Plug -
THDP50 THDP5080 - Threaded Point -
1” PVC - 8 TPI
ITEM # SCH40
ITEM # SCH80
Length Description Pcs Per Box
PTC1014 PTC1018 1' Casing 30
PTC102.54 PTC102.58 2-1/2' Casing 30
PTC1054 PTC1058 5' Casing 30
PTC1104 PTC1108 10' Casing 30
PTC1204 PTC1208 Casing
PTS1014 PTS1018 1' Screen 30
PTS102.54 PTS102.58 2-1/2' Screen 30
PTS1054 PTS1058 5' Screen 30
PTS1104 PTS1108 10' Screen 20
PTS1204 PTS1208 Screen
ORING1 ORING180 - O-ring -
PTCA1 PTCA180 - Threaded Cap -
PTP1 PTP180 - Threaded Plug -
THDP1 THDP180 - Threaded Point -
EADED ASTM
ND SCHEDULE 80 en Unit Price n Slot Size
3/4” PVC – 8 TPI
ITEM # SCH40
ITEM # SCH80
Length Description Pcs Per Box
PTC7514 PTC7518 1' Casing 30
PTC752.54 PTC752.58 2-1/2' Casing 30
PTC7554 PTC7558 5' Casing 30
PTC75104 PTC75108 10' Casing 30
PTC75204 PTC75208 Casing
PTS7514 PTS7518 1' Screen 30
PTS752.54 PTS752.58 2-1/2' Screen 30
PTS7554 PTS7558 5' Screen 30
PTS75104 PTS75108 10' Screen 30
PTS75204 PTS75208 Screen
ORING75 ORING7580 - O-ring -
PTCA75 PTCA7580 - Threaded CAP -
PTP75 PTP7580 - Threaded Plug -
THDP75 THDP7580 - Threaded Point -
1-1/4” PVC – 4 TPI
ITEM # SCH40
ITEM # SCH80
Length Description Pcs Per Box
PTC12514 PTC12518 1' Casing 20
PTC1252.54 PTC1252.58 2-1/2' Casing 20
PTC12554 PTC12558 5' Casing 20
PTC125104 PTC125108 10' Casing 18
PTC125204 PTC125208 ' Casing
PTS12514 PTS12518 1' Screen 20
PTS1252.54 PTS1252.58 2-1/2' Screen 20
PTS12554 PTS12558 5' Screen 20
PTS125104 PTS125108 10' Screen 18
PTS125204 PTS125208 Screen
ORING125 ORING12580 - O-ring -
PTCA125 PTCA12580 - Threaded Cap -
PTP125 PTP12580 - Threaded Plug -
THDP125 THDP12580 - Threaded Point -
ATLANTIC SCREEN & MANUFACTURING, INC.
ATLANTIC SCREEN, INC PHONE: 302-684-3197 142 BROADKILL ROAD FAX: 302-684-0643 MILTON, DE 19968 Page 8 [email protected] 2019 www.atlantic-screen.com
FLUSH THR
SCHEDULE 40 A Casing & Scre Specify Scree
1- 1/2” PVC - 4 TPI
ITEM # SCH40
ITEM # SCH80
Length Description Pcs Per Box
PTC15014 PTC15018 1' Casing 10
PTC1502.54 PTC1502.58 2-1/2' Casing 10
PTC15054 PTC15058 5' Casing 10
PTC15104 PTC15108 10' Casing 10
PTC15204 PTC15208 Casing
PTS15014 PTS15018 1' Screen 10
PTS1502.54 PTS1502.58 2-1/2' Screen 10
PTS15054 PTS15058 5' Screen 10
PTS15104 PTS15108 10' Screen 10
PTS15204 PTS152048 Screen
ORING150 ORING158 - O-ring -
PTCA150 PTCA15080 - Threaded Cap -
PTP150 PTP15080 - Threaded Plug -
THDP150 THDP15080 - Threaded Point -
2-1/2” PVC – 4 TPI
ITEM # SCH40
ITEM # SCH80
Length Description Pcs Per Box
PTC2514 PTC2518 1' Casing 6
PTC252.54 PTC252.58 2-1/2' Casing 6
PTC2554 PTC2558 5' Casing 6
PTC25104 PTC25108 10' Casing 4
PTC725204 PTC725208 Casing
PTS2514 PTS2518 1' Screen 6
PTS252.54 PTS252.58 2-1/2' Screen 6
PTS2554 PTS2558 5' Screen 6
PTS25104 PTS25108 10' Screen 6
PTS25204 PTS25208 Screen
ORING25 ORING2580 - O-ring -
PTCA25 PTCA2580 - Threaded Cap -
PTP25 PTP2580 - Threaded Plug -
THDP25 THDP2580 - Threaded Point -
TSLP2580 - Hoisting Plug -
EADED ASTM
ND SCHEDULE 80 en Unit Price n Slot Size
2” PVC – 2 TPI
ITEM # SCH40
ITEM # SCH80
Length Description Pcs Per Box
PTC2014 PTC2018 1' Casing 14
PTC202.54 PTC202.58 2-1/2' Casing 14
PTC2054 PTC2058 5' Casing 14
PTC2104 PTC2108 10' Casing 8
PTC2204 PTC2208 Casing
PTS2014 PTS2018 1' Screen 14
PTS202.54 PTS202.58 2-1/2' Screen 14
PTS2054 PTS2058 5' Screen 14
PTS2104 PTS2108 10' Screen 8
PTS2204 PTS2208 Screen
ORING2 ORING280 - O-ring N/A
PTCA2 PTCA280 - Threaded CAP -
PTP2 PTP2008 - Threaded Plug -
THDP2 THDP280 - Threaded Point -
TSL2 TSLP80 - Hoisting Plug -
3” PVC – 4 TPI
ITEM # SCH40
ITEM # SCH80
Lengt
h Description Pcs Per
Box
PTC3014 PTC3018 1' Casing 4
PTC302.54 PTC302.58 2-1/2' Casing 4
PTC3054 PTC3058 5' Casing 4
PTC3104 PTC3108 10' Casing 3
PTC3204 PTC3208 20' Casing 4
PTS3014 PTS3018 1' Screen 4
PTS302.54 PTS302.58 2-1/2' Screen 4
PTS3054 PTS3058 5' Screen 4
PTS3104 PTS3108 10' Screen 3
PTS3204 PTS3208 20' Screen 4
ORING3 ORING380 - O-ring -
PTCA3 PTCA380 - Threaded Cap -
PTP3 PTP380 - Threaded Plug -
THDP3 THDP380 - Threaded Point -
TSLP380 - Hoisting Plug -
ATLANTIC SCREEN & MANUFACTURING, INC.
ATLANTIC SCREEN, INC PHONE: 302-684-3197 142 BROADKILL ROAD FAX: 302-684-0643 MILTON, DE 19968 Page 9 [email protected] 2019 www.atlantic-screen.com
FLUSH THR
SCHEDULE 40 A Casing & Scre Specify Scree
4” PVC - 2 TPI or 4 TPI
ITEM # SCH40
ITEM # SCH80
Length Description Pcs Per Box
PTC4014 PTC4018 1' Casing 3
PTC402.54 PTC402.58 2-1/2' Casing 3
PTC4054 PTC4058 5' Casing 3
PTC4104 PTC4108 10' Casing 2
PTC4204 PTC4208 20' Casing 2
PTS4014* PTS4018 1' Screen 3
PTS402.54* PTS402.58 2-1/2' Screen 3
PTS4054* PTS4058 5' Screen 3
PTS4104* PTS4108 10' Screen 2
PTS4204* PTS4208 20' Screen 2
ORING4 ORING4 - O-ring
PTCA4 PTCA80 - Threaded Cap
PTP4 PTP80 - Threaded Plug
THDP4 THDP80 - Threaded Point
TSLP4 TSLP80 -- Hoisting Plug
* High Flow Available
5” PVC – 2 TPI or 4 TPI
2ITEM # 2SCH40
ITEM # SCH80
Length Description Pcs Per Box
PTC50014 - 1' Casing 1
PTC5002.54 - 2-1/2' Casing 1
PTC50054 - 5' Casing 1
PTC50104 PTC50104 10' Casing 1
PTC50204 PTC50204 20' Casing 1
PTS50014 - 1' Screen 1
PTS5002.54 - 2-1/2' Screen 1
PTS50054 - 5' Screen 1
PTS50104 PTS50104 10' Screen 1
PTS50204 PTS50204 20' Screen 1
ORING5 ORING5 - O-ring 1
PTCA5 PTCA580 - Threaded Cap 1
PTP5 PTP580 - Threaded Plug 1
- TSLP580 - Hoisting Plug -
EADED ASTM
ND SCHEDULE 80 en Unit Price n Slot Size
4-1/2” PVC – 4 TPI
ITEM # SCH40
ITEM # SCH80
Length Description Pcs Per Box
PTC4501 - 1' Casing 2
PTC4502.5 - 2-1/2' Casing 2
PTC4505 - 5' Casing 2
PTC4510 - 10' Casing 2
PTC4520 - 20' Casing 2
PTS4501 - 1' Screen 2
PTS4502.5 - 2-1/2' Screen 2
PTS4505 - 5' Screen 2
PTS4510 - 10' Screen 2
PTS4520 - 20' Screen 2
ORING45 - - O-ring -
PTCA45 - - Threaded CAP -
PTP45 - - Threaded Plug -
THDP45 - - Threaded Point -
TSLP45 - - Hoisting Plug -
6” PVC – 2 TPI
ITEM # SCH40
ITEM # SCH80
Lengt
h Description Pcs Per
Box
PTC6014 PTC6018 1' Casing 1
PTC602.54 PTC602.58 2-1/2' Casing 1
PTC6054 PTC6058 5' Casing 1
PTC6104 PTC6108 10' Casing 1
PTC6204 PTC6208 20' Casing 1
PTS6014 PTS6018 1' Screen 1
PTS602.54 PTS602.58 2-1/2' Screen 1
PTS6054 PTS6058 5' Screen 1
PTS6104 PTS6108 10' Screen 1
PTS6204 PTS6208 20' Screen 1
ORING6 ORING6 - O-ring 1
PTCA6 PTCA680 - Threaded Cap 1
PTP6 PTP680 - Threaded Plug 1
TSLP6 - - Hoisting Plug 1
ATLANTIC SCREEN & MANUFACTURING, INC.
ATLANTIC SCREEN, INC PHONE: 302-684-3197 142 BROADKILL ROAD FAX: 302-684-0643 MILTON, DE 19968 Page 10 [email protected] 2019 www.atlantic-screen.com
FLUSH THR
SCHEDULE 40 A Casing & Scre Specify Scree
8” PVC – 2 TPI
ITEM # SCH40
ITEM # SCH80
Length Description Pcs Per Box
PTC814 PTC818 1' Casing 1
PTC802.54 PTC802.58 2-1/2' Casing 1
PTC8054 PTC8058 5' Casing 1
PTC8104 PTC8108 10' Casing 1
PTC8204 PTC8208 20' Casing 1
PTS8014 PTS8018 1' Screen 1
PTS802.54 PTS802.58 2-1/2' Screen 1
PTS8054 PTS8058 5' Screen 1
PTS8104 PTS8108 10' Screen 1
PTS8204 PTS8208 20' Screen 1
ORING8 ORING8 - O-ring 1
PTCA8 PTCA880 - Threaded Cap 1
PTP8 PTP880 - Threaded Plug 1
10” PVC - 2 TPI
ITEM # SCH40
ITEM # SCH80
Length Description Pcs Per Box
PTC10014 1' Casing 1
PTC1002.54 PTC1002.58 2-1/2' Casing 1
PTC10054 PTC10058 5' Casing 1
PTC10104 PTC10108 10' Casing 1
PTC10204 PTC10208 20' Casing 1
PTS10014 - 1' Screen 1
PTS1002.54 PTS1002.58 2-1/2' Screen 1
PTS10054 PTS10058 5' Screen 1
PTS10104 PTS10108 10' Screen 1
PTS10204 PTS10208 20' Screen 1
ORING10 ORING10 - O-ring 1
PTCA10 PTCA1080 - Threaded CAP 1
PTP10 PTP1080 - Threaded Plug 1
EADED ASTM
ND SCHEDULE 80 en Unit Price n Slot Size
12” PVC – 2 TPI
ITEM # SCH40
ITEM # SCH80
Length Description Pcs Per Box
PTC1254 PTC1258 5' Casing 1
PTC12104 PTC12108 10' Casing 1
PTS1254 PTS1258 5' Screen 1
PTS12104 PTS12108 10' Screen 1
ORING12 ORING12 - O-ring 1
PTCA12 PTCA128 - Threaded Cap 1
PTP12 PTP128 - Threaded Plug 1
14” PVC – 2 TPI
ITEM # SCH40
ITEM # SCH80
Length Description Pcs Per Box
PTC1454 PTC1458 5' Casing 1
PTC14104 PTC14108 10' Casing 1
PTS1454 PTS1458 5' Screen 1
PTS14104 PTS14108 10' Screen 1
ORING14 ORING14 - O-ring 1
PTCA14 PTCA1480 - Threaded Cap 1
PTP14 PTP1480 - Threaded Plug 1
16” PVC – 2 TPI
ITEM # SCH40
ITEM # SCH80
Length Description Pcs Per Box
PTC16104 PTC161008 10' Casing 1
PTS16104 PTS161008 10' Screen 1
ORING16 ORING16 - O-ring 1
PTCA16 PTCA168 - Threaded Cap 1
PTP16 PTP168 - Threaded Plug
ATLANTIC SCREEN & MANUFACTURING, INC.
ATLANTIC SCREEN, INC PHONE: 302-684-3197 142 BROADKILL ROAD FAX: 302-684-0643 MILTON, DE 19968 Page 11 [email protected] 2019 www.atlantic-screen.com
SLOTTED PIPE SPECS
Slotted Pipe Bid Request
Diameter: __________ SCH/SDR ________ O.D. _________ I.D. __________ Min. Wall: _________
Materal: _______________________ Ends: __________________________ Length: ____________
Slot Width: _________________ Row Locations: _________________________________________
NOA (In Square Inches/Foot: ____________________ NOA (as a % of inside surface area: ________
Quantities: _____________ Company Name: __________________________________________
Contact: ______________________________________ Phone: _____________________________
Email: _____________________________________________ Ship To State: ___________ ______
Slot Rows: 1 to 10 depending on pipe diameter and length of slot
ATLANTIC SCREEN & MANUFACTURING, INC.
ATLANTIC SCREEN, INC PHONE: 302-684-3197 142 BROADKILL ROAD FAX: 302-684-0643 MILTON, DE 19968 Page 12 [email protected] 2019 www.atlantic-screen.com
POROUS POLYETHYLENE (HDPE) Porous Piezometers are for water level measurements, water sampling, diffusing, air sparging, filtering, and muffling. When used in diffusing and sparging applications, Porous Plastic Tubes emit a multitude of small, evenly distributed bubbles. In filtration applications, the omni-directional, interconnecting pore structure acts as both a surface and a depth filter. Available in 40 micron pore size. Top is fitted with ¾ 8TPI SCH40. Bottom has pinned plug, SCH 40. Available in 12", 18" or 36" lengths; Points, threaded caps female, threaded plugs male.
with male x female threaded ends
Designed for probes, soil, monitoring, etc.
Quotes Require all of the Following Information
Diameter: ______ Schedule: _____ or SDR ______ Length Per Piece: _______ Screen Ends: __________
#/Rows/Slots: __________ Slot Width: _______ Slot Spacing: _______ Material: __________________
Configuration of Rows: _____________________________ # Pieces ________ Total Footage: _________
Pipe Furnished by Atlantic Screen Inc Distributor Drawing Attached? _____________
ITEM # `DESCRIPTION SIZE
PPD1.315x12 Porous Polyethylene Piezometer 1.315 x 12"
PPD1.315x18 Porous Polyethylene Piezometer 1.315 X 18"
PPD1.315x36 Porous Polyethelene Piezometer 1.315 x 36"
ASI SCREEN
PVC and CPVC, CPVC Copper tubing Size, HDPE, Stainless, and PVC Vee Wire.
Pipe in schedules 40, 80, and 120; SDR's various 11, 17, 21, 35 Belled & Gasketed
Plain End -Male NPT – Female adapter, belled, solvent, bell and gasket
Water Wells, Irrigation, Dewatering, Industrial Filtrations. Soil Stabilizations, Pump
Strainers, Injection /Recovery Systems, Bioremediation, Methane Relief, Piezometers,
Under Drains, Pump Strainers, Diffusers, Environmental Groundwater Monitoring.
Petroleum Observation Wells, Horizontal Drilling, Air Sparging, Soil Vapor Extraction
(Mining), Canal/Lake Screens, Lateral or Header Systems, directional drilling, cathodic
protection, deep anode wells.
Available with choice of end fittings – caps, plugs, points, washdown valves, well
seals
Custom slotted patterns available, our specialty.
Boxed or skid quantities
SIZES AVAILABLE
Pipe Sizes: ½ Inch through 24 inches
Length: 1 foot through 20 Feet
Slot Sizes Available: .006 inch to .500, 1/8”, 3/16”, 1/4” , 3/8”, 1” spacing
ATLANTIC SCREEN & MANUFACTURING, INC.
ATLANTIC SCREEN, INC PHONE: 302-684-3197 142 BROADKILL ROAD FAX: 302-684-0643 MILTON, DE 19968 Page 13 [email protected] 2019 www.atlantic-screen.com
OTHER SCREEN & CASING ALSO AVAILABLE
call for availability
PVC
STAINLESS STEEL
HDPE
CPVC
ORDERING REQUIREMENTS
Length Schedule Diameter Individually Sealed or Unsealed Thread Type & Threads Per Inch (TPI)
Boxed Skidded How Shipped Required Delivery Date
WELL SCREEN REQUIREMENTS – ALL TYPES
Length Schedule Diameter Slot Spacing # of Rows of Slots Slot Size (in 1000ths of an inch)
Individually Sealed or Unsealed
End Type (threaded, plain, belled) Thread Type & Threads Per Inch (TPI) Boxed Skidded How Shipped Required Delivery Date
ORDER CHECKLIST□ Casings □ Well Screens □ Bottom Fittings □ Top Fittings/ Locking Plugs □ Manholes □ Centralizers □ Steel/PVC Well Protectors □ Bailers □ Bailer Cord
□ Alconox™ / Liqui-Nox™ □ Wash Down Valves (Sand Shark) □ Auger Plugs □ Holeplug □ Benseal □ Quickgel □ Bentonite Pellets 3/8”, plain or coated □ Gravel #1 or #2 □ Soda Ash
ATLANTIC SCREEN & MANUFACTURING, INC.
ATLANTIC SCREEN, INC PHONE: 302-684-3197 142 BROADKILL ROAD FAX: 302-684-0643 MILTON, DE 19968 Page 14 [email protected] 2019 www.atlantic-screen.com
PVC construction, HDPE and CPVC Designed primarily as under drain, methane gas, leachate collection pipe, dewatering, remediation, air sparging, filters, soil stabilization, cathodic protection, deep anode wells. Available with choice of end fittings: caps, plugs, or NPT adapters.
SIZES AVAILABLE
Pipe Sizes: ½ inch through 24 inches Length: 1 foot through 20 feet Perforation: 1/16 inch and larger
ATLANTIC SCREEN & MANUFACTURING, INC.
ATLANTIC SCREEN, INC PHONE: 302-684-3197 142 BROADKILL ROAD FAX: 302-684-0643 MILTON, DE 19968 Page 15 [email protected] 2019 www.atlantic-screen.com
ATLANTIC SCREEN & MANUFACTURING, INC.
ATLANTIC SCREEN, INC PHONE: 302-684-3197 142 BROADKILL ROAD FAX: 302-684-0643 MILTON, DE 19968 Page 16 [email protected] 2019 www.atlantic-screen.com
ATLANTIC SCREEN & MANUFACTURING, INC.
ATLANTIC SCREEN, INC PHONE: 302-684-3197 142 BROADKILL ROAD FAX: 302-684-0643 MILTON, DE 19968 Page 17 [email protected] 2019 www.atlantic-screen.com
Use to extend length of observation wells that are too short.
2' long 1 ¼”x2” fit inside 2” Wells 2”x3” fit inside 3” Wells 3”x4” fit inside 4” Wells 4”x6” fit inside 6” Wells 6”x8” fit inside 8” Wells
TRI-SEAL INSERTS
PETROLEUM OBSERVATION WELLS
ITEM # DESCRIPTION
POW4020013_*_10P 2” x 13' Sch.40 = 10' Slotted with plug ** POW4040013_*_10P 4” x 13' Sch.40 = 10' Slotted with plug ** POW4060013_*_10P 6” x 13' Sch.40 = 10' Slotted with plug ** POW4080013_*_10P 8” x 13' Sch.40 = 10' Slotted with plug ** POW4100013_*_10P 10” x 13' Sch.40 = 10' Slotted with plug ** POW4120013_*_10P 12” x 13' Sch.40 = 10' Slotted with plug ** *Specify Slot Size ** Points also available for 2” & 4”
QUOTES REQUIRE ALL OF THE FOLLOWING INFORMATION:
Diameter ________ Sch _____ or SDR _______ Length per Piece ____________ Screen Ends ________ No. Rows/Slots __________________ Slot Width (in 1000ths) __________ Slot Spacing ____________ Material __________________________________ (all PVC will be quoted as Type I ) Configuration of Rows _____________________ # Pieces ____________ Total Footage ____________ Pipe furnished by Atlantic Screen Distributor Drawing Attached ? ____________
Petroleum observation wells are constructed of Schedule 40 PVC Pipe unless otherwise
Specified. Custom slotted pipe to meet EPA, state or local specifications is also available. 2', 8', 12', 15', 16' and 20' lengths available.
LIQUID/VAPOR PIEZOMETERS
Can be used for site soil investigation, where underground storage tanks have been abandoned or removed. Available in 1/2” - 4” Comes with point Top fittings available upon request. Locking Cap 1”, 1-1/4”, 2”, 4”, 6", 8"
SCREEN FOR SVE
A high-flow screen for soil vapor extraction (SVE). The slot spacing of the high-flow screen helps maximize the flow of vaporized VOCs during extraction.
CANAL / LAKE SCREENS
Constructed of PVC Pipe Sch 40 Slotted .040 for Maximum Flow. 2” MPT on 2” Strainers 2” FPT on 3” Strainers
CUSTOM SIZES AND LENGTHS
Pipe Size Length (Ft.) 2” 3' 3” 3'
ATLANTIC SCREEN & MANUFACTURING, INC.
ATLANTIC SCREEN, INC PHONE: 302-684-3197 142 BROADKILL ROAD FAX: 302-684-0643 MILTON, DE 19968 Page 18 [email protected] 2019 www.atlantic-screen.com
HEADER COUPLING
Flexible rubber sleeve with stainless steel clamps to temporarily connect to Header Pipe. 6” or 8”
DEWATERING SCREENS AND ACCESSORIES
Grommet W70-GROM-HP 6/12
Hat Plug W70-HAT-Plug
Vinyl Riser top W70-1600-004
INTERNAL COUPLING Sch 40
1-1/4”, 1-1/2”, 2”, 4” could be
used to reline old wells where
external coupling may hang up.
Item# IC112
COMPLETE HEADER VALVE ASSEMBLY
Available for 6” & 8” pipe
Adjustable plastic top to control water & air flowing through the swing hose. W70-VAL-PVC-6 Complete W70-VAL-PVC-8 Complete
SWING ARM w/Ball Valve
Clear flexible hose to monitor water flow. W70 Swing1.5x3 BUHT
1-1/4” x 20' 3' SLOTTED
1-1/2” x 20' 3' SLOTTED
1-1/2” X 36” SLOTTED X POINT
1-1/2” X 36” SLOTTED X WASHDOWN VALVE
.016 - .020 PVC POINT BOTTOM SCH 40 PVC
ATLANTIC SCREEN & MANUFACTURING, INC.
ATLANTIC SCREEN, INC PHONE: 302-684-3197 142 BROADKILL ROAD FAX: 302-684-0643 MILTON, DE 19968 Page 19 [email protected] 2019 www.atlantic-screen.com
HOLLOW STEM AUGER PLUGS AUGER KNOCK OUT PLUG
Sizes: 2 1/4” to 12-1/4” Use with hollow stem augers. HDPE
Environmental Auger Plugs
Part# Size Material
AP21/4 2-1/4” HDPE
AP31/4 3-1/4” HDPE
AP41/4 4-1/4” HDPE
AP61/4 6-1/4” HDPE
AP658 6-5/8” HDPE
AP814 8-1/4” HDPE
AP1014 10-1/4” HDPE
AP1214 12-1/4” HDPE
JS (PVC Pipe Clamps)
ITEM # PIPE SIZE OD WEIGHT
Kwik Klamp 1 1” - 2” 15 lbs Kwik Klamp 2* 2-1/2” - 4” 35 lbs KWIK Klamp 3* 6” 40lbs
* Additional jaw pads and bolts available to convert to larger pipe sizes.
PVC Casing elevators are sold in pairs.
EV05 1/2” 12 lbs EV5 5” 24 lbs EV075 3/4” 12 lbs EV6 6” 26 lbs EV1 1” 12 lbs EV625 6-1/2” 26 lbs EV125 1-1/4” 12 lbs EV8 8” 33 lbs EV15 1-1/2” 12 lbs EV10 10” 36 lbs EV2 2” 15 lbs EV12 12” 38 lbs EV25 2-1/2” 15 lbs EV14 14” 48 lbs EV3 3” 19 lbs EV16 16” 58 lbs EV4 4” 24 lbs EV20 18-20” 140 lbs EV45 4-1/2” 24 lbs
Kwik Klamp ELEVATORS
For Pipe Sizes
FJC3 3” (3.5” OD) FJC4 4” (4.5” OD) FJC4 5 4-1/2” (5” OD) FJC5 5” (5.5” OD) FJC6 6” (6.6875” OD) FJC6.9 6-1/4” (6.9”OD) FJC8 8” (8.625” OD) Larger size flush joint clamps are custom built.
Call for availability.
Knock out plug is constructed of virgin grade
polypropylene. It is designed to prevent
material from entering hollow stem augers.
Three sizes: 1/2” to 2” (122JS)
2” to 6” (26JS)
8” to 10” (810JS)
Strong but light weight using an aluminum alloy base plate.
Large opening in base plates allows couplings to pass through.
Tested to 4000 lbs.
PVC Flush Joint Pipe Clamp
ATLANTIC SCREEN & MANUFACTURING, INC.
ATLANTIC SCREEN, INC PHONE: 302-684-3197 142 BROADKILL ROAD FAX: 302-684-0643 MILTON, DE 19968 Page 20 [email protected] 2019 www.atlantic-screen.com
PVC Vee-Wire™ PLASTIC SCREENS
W/ Flush Threads Sch 40 or Sch 80 – Shoulder to Shoulder length
ITEM # Pipe Size
OD ID TPI 2 Feet Est. Wt.
5 Feet Est. Wt.
10 Feet Est. Wt.
Collapse Strength (PSI)
PVW114F 1-1/4” 1.66 1.12 4 2.1 4.2 8.4 240
PVW112F 1-1/2” 1.90 1.41 4 2.2 4.4 8.8 160
PVW2F 2” 2.580 2.00 2 3 5 9 65
PVW3F 3” 3.50 2.89 2 4 8 16 150
PVW4F 4” 4.62 3.95 2 5 9 18 65
PVW5F 5” 5.556 4.81 2 9 17 34 65
PVW6F 6” 6.625 5.75 2 10 19 38 55
PVW8F 8” 8.630 7.50 2 12 22 44 55
PVC Vee-Wire™ PLASTIC SCREENS – with Plain Ends
ITEM # Pipe Size
OD ID 2 Feet Est. Wt.
5 Feet Est. Wt.
10 Feet Est. Wt.
Collapse Strength (PSI)
PVW114P 1-1/4” 1.66 1.12 1.5 3.5 7 240
PVW112P 1-1/2” 1.90 1.41 2 4 8 160
PVW2P 2” 2.357 1.90 2 4 8 65
PVW3P 3” 3.50 2.89 3 7.5 15 150
PVW4P 4” 4.5 3.95 4 8.5 17 65
PVW5P 5” 5.563 4.81 6 15 30 65
PVW6P 6” 6.625 5.75 8 18 37 55
PVW8P 8” 8.625 7.50 9 22 44 55
ATLANTIC SCREEN & MANUFACTURING, INC.
ATLANTIC SCREEN, INC PHONE: 302-684-3197 142 BROADKILL ROAD FAX: 302-684-0643 MILTON, DE 19968 Page 21 [email protected] 2019 www.atlantic-screen.com
STAINLESS STEEL SCREENS, RISERS and FITTINGS
304SS DRIVE POINTS
1-1/4” PS 1.71” OD x 1” ID
2” PS 2.3/8” OD X 1.75” ID
*3” PS All Drive 3.7” OD X 3” ID
*4” PS All Drive 4.69” OD X 4” ID
Model Number
Screen Length
Ship Wt/Pc
Model Number
Screen Length
Ship Wt/Pc
Screen Length
Ship Wt/Pc
Screen Length
Ship Wt/Pc
824 24” 5 924 24” 8 24” 10 24” 13
836 36” 7 936 36” 11 36” 14 36” 17
848 48” 9 948 48” 14 48” 17 48” 21
860 60” 11 960 60” 16 60” 22 60” 25
* Fittings are 304SS MIP X Carbon Steel Point w/guardian plate or 304 SS MIP X MIP for open end extensions
304 SS SMALL DIAMETER WATER WELL SCREENS
Nom Diam Wt/Ft
Dimensions Max Depth Based on Collapse Strength OD ID
2P/3T- 3.0 #
2.6 2.02 1000'
3P/4T – 4.0#
3.56 3.16 900'
4P/5T – 5.0#
4.75 4.16 500'
5P/6T – 6.0#
5.63 5.05 300'
304SS SMALL DIAMETER ENVIRONMENTAL SCREENS
Nom Diam Wt/Ft
Dimensions Max Depth Based on Collapse Strength
OD ID
½” PS 1# 0.89 0.53 2000'
3/4”PS 4# 1.09 0.73 2000'
1” PS 5# 1.32 1.05 2000'
1-1/4” PS 6# 1.67 1.38 1000'
1-1/2” PS 3# 2.01 1.54 1000'
2” PS 3# 2.38 2.07 1000'
2-1/2” PS 4# 3.03 2.45 1000'
3” PS 4# 3.56 3.07 1000'
4” PS 5# 4.75 4.00 500'
6” PS 7# 6.64 6.00 500'
ATLANTIC SCREEN & MANUFACTURING, INC.
ATLANTIC SCREEN, INC PHONE: 302-684-3197 142 BROADKILL ROAD FAX: 302-684-0643 MILTON, DE 19968 Page 22 [email protected] 2019 www.atlantic-screen.com
ATLANTIC SCREEN & MANUFACTURING, INC.
ATLANTIC SCREEN, INC PHONE: 302-684-3197 142 BROADKILL ROAD FAX: 302-684-0643 MILTON, DE 19968 Page 23 [email protected] 2019 www.atlantic-screen.com
NOTE: Male X Male, Female x Female and ASTM Flush Fitting available.
TRANSMITTING CAPACITY CHART Gallons Per Minute Per Foot of Screen
at 0.1 Foot Per Second SCREEN 1-1/4" 2: 3" 4" 5" 6" GPM/FT 5 8 12 16 21 25
NPT Male Points
ITEM # Pipe Size O.D. Length
916800-3 1-1/4" 1.75 36"
916802-3 2" 2.5 36"
916802-4 2" 2.5 48"
NPT Male X Female
ITEM # Pipe Size O.D. Length
916810-3 1-1/4" 1.75 36"
916812-4 2" 2.5 48"
Description Item # Pipe Size
Screen O.D.
Screen Length
NPT Male X Female 916813-3 3" 3.5 3'
NPT Male X Female 916813-4 3" 3.5 4'
NPT Male X Female 916814-3 4" 4.5 3'
NPT Male X Female 916814-4 4" 4.5 4'
NPT Male X Female 916815-3 5" 5.5 3'
NPT Male X Female 916815-4 5" 5.5 4'
NPT Male x Plate Bottom 916833-3 3" 3.5 3'
NPT Male x Plate Bottom 916833-4 3" 3.5 4'
NPT Male x Plate Bottom 916834-3 4" 4.5 3'
NPT Male x Plate Bottom 916834-4 4" 4.5 4'
NPT Male x Plate Bottom 916835-3 5" 5.5 3'
NPT Male x Plate Bottom 916835-5 5" 5.5 5'
NPT Male x Plate Bottom 916836-5 6" 6.5 5'
Welding x Weld Ring 916885-3 5" 5.5 3'
Welding x Weld Ring 916885-5 5" 5.5 5'
Welding x Weld Ring 916886-5 6" 6.5 5'
WELL SCREENS
Stainless Steel Drive Points
SANDBLOCKER II WELL SCREENS Features large inflow area of 32 providing twice the flow of wire
wrap screens. One size fits all. Resistant to plugging and
erosion. Gravel pack not required. All Stainless Steel
construction,
ATLANTIC SCREEN & MANUFACTURING, INC.
ATLANTIC SCREEN, INC PHONE: 302-684-3197 142 BROADKILL ROAD FAX: 302-684-0643 MILTON, DE 19968 Page 24 [email protected] 2019 www.atlantic-screen.com
SAND SHAKER
Our portable SS-81 sand shaker is an accurate mechanical
sieve kit designed to provide reliable grain size analysis. It
features 12 stainless steel screens ranging in size from U.S.
Sieve no. 8 to 60. The samples are placed into five acrylic
cylinders and volumetric percentages are indicated on the
shaker frame.
INTERNAL PLASTIC PIPE CUTTERS
Make accurate, square cuts at floor level or in other blind locations. Easily preset for depth of cut, they are installed in the pipe and make their cuts in seconds. Recommended user supplied power source: 1/2” capacity, 350-450 rpm drill, rated at 4.5 to 6 amps. For PVC and ABS plastic pip. For individual pipe sizes from 1-1/2” to 6” diameter.
Inside Pipe Cutter: #RG-3 One size 2” and larger.
Replacement blades available #IP3K
ITEM # KEC-SS-81 Sand Shaker KEC-RS-___*_ Replacement Screen * Place mesh size in blank
Item # DESCRIPTION WEIGHT
IPC-1590 For 1-1/2” Sch 40 pipe and DWV 1 lb.
IPC-2290 For 2” sch 40 pipe and DWV 1 lb. 10 oz.
IPC-2492 For 2” sch 80 pipe and DWV 1 lb. 5 oz.
IPC-3290 For 3” sch 40 pipe and DWV 2-1/2 lb.
IPC-3490 For 3” sch 80 pipe and DWV 2-2/3 lb.
IPC-4290 For 4” sch 40 pipe and DWV 3 lb.
IPC-4490 For 4” sch 80 pipe and DWV 3 lb.
IPC-6000 For 6” sch 40 pipe and DWV 2 lb. 11 oz.
IPC770777 Drive shaft for 2” Model
IPC700778 Drive shaft for 3”, 4”, and 6” models
IPCB-1293 Replacement Blade for Models 1590. 2290. 2492
IPCB-3293 Replacement Blade for Models 3290, and 3490
IPCB-4293 Replacement Blade for Models 4290 and 4490
IPCB-6293 Replacement Blade for Model 6000
ATLANTIC SCREEN & MANUFACTURING, INC.
ATLANTIC SCREEN, INC PHONE: 302-684-3197 142 BROADKILL ROAD FAX: 302-684-0643 MILTON, DE 19968 Page 25 [email protected] 2019 www.atlantic-screen.com
ATLANTIC SCREEN & MANUFACTURING, INC.
ATLANTIC SCREEN, INC PHONE: 302-684-3197 142 BROADKILL ROAD FAX: 302-684-0643 MILTON, DE 19968 Page 26 [email protected] 2019 www.atlantic-screen.com
PVC SLIP FITTINGS & ADAPTERS
SLIP PLUGS
SCH 40 SIZE BOX
40PL12 1/2” ** 100
40PL34 3/4” 50
40PL1 1” 100
40PL114 1-1/4” 50
40PL112 1-1/2” 25
40PL2 2” 10
40PL3 3” 5
40PL4 4” 5
40PL5 5” 4
40PL6 6” 5
40PL8 8” 4
40PL10 10” 2
40PL12 12” 2
40PL14 14”* -
40PL16 16”* -
40PL18 18”* -
40PL20 20”* -
40PL24 24”* - * Plate style. Not Sold Separately. ** Manufactured from gray PVC Barstock.
SLIP PLUGS
SCH 80 SIZE BOX
80PL12 1/2” 100
80PL34 3/4” 50
80PL1 1” 100
80PL114 1-1/4” 50
80PL112 1-1/2” 25
80PL2 2” 10
80PL3 3” 5
80PL4 4” 5
80PL5 5”‡ 4
80PL6 6”‡ 5
80PL8 8”‡ 4
80PL10 10”‡ 2
80PL12 12”‡ 2 ‡ Pipe turned out. Not sold separately.
No Minimum Quantity
SLIP POINTS
SCH 40 SIZE BOX
40PT1 1” 100
40PT114 1-1/4” 100
40PT112 1-1/2” 100
40PT2 2” 25
40PT3 3” 10
40PT4 4” 5
SLIP POINTS
SCH 80 SIZE BOX
80PT114 1-1/4” 25
80PT112 1-1/2” 25
80PT2 2” 25
SLIP POINTS
SDR 26 SIZE BOX
160PT114 1-1/4” 25
160PT112 1-1/2” 25
SLIP PLUGS
SDR 26 SIZE BOX
160PT114 1-1/4” 25
160PT112 1-1/2” 25
160PT2 2” 25
160PT3 3” 10
160PT4 4” 5
ATLANTIC SCREEN & MANUFACTURING, INC.
ATLANTIC SCREEN, INC PHONE: 302-684-3197 142 BROADKILL ROAD FAX: 302-684-0643 MILTON, DE 19968 Page 27 [email protected] 2019 www.atlantic-screen.com
PVC SLIP FITTINGS & ADAPTERS
MALE ADAPTERS
SCH 40 SIZE
40MA12 1/2”
40MA34 3/4”
40MA1 1”
40MA114 1-1/4”
40MA112 1-1/2”
40MA2 2”
40MA3 3”
40MA4 4”
40MA6 6”
40MA8 8”
FEMALE ADAPTERS
SCH 40 SIZE
40FA12 1/2”
40FA34 3/4”
40FA1 1”
40FA114 1-1/4”
40FA112 1-1/2”
40FA2 2”
40FA3 3”
40FA4 4”
40FA6 6”
40FA8 8”
INTERNAL SLIP COUPLINGS
SCH 40 X SCH 40 SIZE
ISC11/4S4 1-1/4” X 1-1/4”
ISC11/2S4 1-1/2” X 1-1/2”
ISC11/2S4X3/4 1-1/2” X 1-1/2”x 3/4”
ISC2S4 2” X 2”
ISC4 4” X 4”
ALL TYPES OF FITTINGS AVAILABLE
SLIP COUPLINGS
SCH 40 SIZE
40SC12 1/2”
40SC34 3/4”
40SC1 1”
40SC114 1-1/4”
40SC112 1-1/2”
40SC2 2”
40SC3 3”
40SC4 4”
40SC5 5”
40SC6 6”
40SC8 8”
40SC10 10”
40SC12 12”
SLIP CAPS
SCH 40 SIZE
40CAP12 1/2”
40CAP34 3/4”
40CAP1 1”
40CAP114 1-1/4”
40CAP112 1-1/2”
40CAP2 2”
40CAP3 3”
40CAP4 4”
40CAP5 5”
40CAP6 6”
40CAP8 8”
40CAP10 10”
40CAP12 12”
REDUCING COUPLING
SIZE
RDCX2SXS 4” x 2”
ATLANTIC SCREEN & MANUFACTURING, INC.
ATLANTIC SCREEN, INC PHONE: 302-684-3197 142 BROADKILL ROAD FAX: 302-684-0643 MILTON, DE 19968 Page 28 [email protected] 2019 www.atlantic-screen.com
ATLANTIC SCREEN & MANUFACTURING, INC.
ATLANTIC SCREEN, INC PHONE: 302-684-3197 142 BROADKILL ROAD FAX: 302-684-0643 MILTON, DE 19968 Page 29 [email protected] 2019 www.atlantic-screen.com
ATLANTIC SCREEN & MANUFACTURING, INC.
ATLANTIC SCREEN, INC PHONE: 302-684-3197 142 BROADKILL ROAD FAX: 302-684-0643 MILTON, DE 19968 Page 30 [email protected] 2019 www.atlantic-screen.com
ATLANTIC SCREEN & MANUFACTURING, INC.
ATLANTIC SCREEN, INC PHONE: 302-684-3197 142 BROADKILL ROAD FAX: 302-684-0643 MILTON, DE 19968 Page 31 [email protected] 2019 www.atlantic-screen.com
Part Number Pipe Size / Description
Wash Down Valves PVC (Sand Shark)
Bronze Back Pressure Valves
2" 2-1/2" 3" 4" 6" 8" 10"
ATLANTIC SCREEN & MANUFACTURING, INC.
ATLANTIC SCREEN, INC PHONE: 302-684-3197 142 BROADKILL ROAD FAX: 302-684-0643 MILTON, DE 19968 Page 32 [email protected] 2019 www.atlantic-screen.com
PRIMER, CEMENT, CLEANER
Pint and Quart Cans
DIRECT PUSH LINERS FOR GEO PROBE SYSTEMS
Part # Product Description Units Per Case
CV-MC4 4' x 2” Heavy Duty Clear PVC Soil Liner 66
CV-MC5 5’ x 2” Heavy Duty Clear PVC Soil Liner 66
CV-DT224C 4’ PVC Soil Liner with catcher 64
CV-DT225C 5’ PVC Soil Liner with catcher 64
CV-DT324 4’ Clear PVC Soil Liner 45
CV-DT325 5’ Clear PVC Soil Liner with catcher 45
SPECIFICATIONS
Made from 100% Virgin, Medical Grade, Clear Rigid PVC – Zero regrind
MACRO CORE Probe 24”, 48” & 60” Applications
Straight & Clear
Consistent Wall Thickness
Designed for use with GEOPROBE& AMS Direct push units
Oatey PVC Plastic Pipe Cement
Clear Heavy Duty or Purple
Oatey PVC Professional Grade Primer Clear
ATLANTIC SCREEN & MANUFACTURING, INC.
ATLANTIC SCREEN, INC PHONE: 302-684-3197 142 BROADKILL ROAD FAX: 302-684-0643 MILTON, DE 19968 Page 33 [email protected] 2019 www.atlantic-screen.com
ATLANTIC SCREEN & MANUFACTURING, INC.
ATLANTIC SCREEN, INC PHONE: 302-684-3197 142 BROADKILL ROAD FAX: 302-684-0643 MILTON, DE 19968 Page 34 [email protected] 2019 www.atlantic-screen.com
Part # White
Part # Clear
Description
W051 C051 .84OD X 12” Long
W052 C052 .84OD X 24” Long
W-53 C-53 .84OD X 36” Long
W054 C054 .84OD X 48” Long
W055 C055 .84OD X 60” Long
W101 C101 1.315OD X 12” Long
W102 C102 1.315OD X 24” Long
W103 C103 1.315OD X 36” Long
W104 C104 1.315OD X 48” Long
W105 C105 1.315OD X 60” Long
W141 C141 1.66OD x 12” Long
W142 C142 1.66OD x 24” Long
W143 C143 1.66OD x 36” Long
W144 C144 1.66OD x 48” Long
W145 C145 1.66OD x 60” Long
W201 C201 2.375OD X 12” Long
W202 C202 2.375OD X 24” Long
W203 C203 2.375OD X 36” Long
W204 C204 2.375OD X 48” Long
W205 C205 2.375OD X 60” Long
W32 C32 3.5OD x 24” Long
W33 C33 3.5OD x 36” Long
W34 C34 3.5OD x 48” Long
W35 C35 3.5OD x 60” Long
ATLANTIC SCREEN & MANUFACTURING, INC.
ATLANTIC SCREEN, INC PHONE: 302-684-3197 142 BROADKILL ROAD FAX: 302-684-0643 MILTON, DE 19968 Page 35 [email protected] 2019 www.atlantic-screen.com
ATLANTIC SCREEN & MANUFACTURING, INC.
ATLANTIC SCREEN, INC PHONE: 302-684-3197 142 BROADKILL ROAD FAX: 302-684-0643 MILTON, DE 19968 Page 36 [email protected] 2019 www.atlantic-screen.com
Description Item # 1-7/8" Item# 1" Standard Bailer Top D3863611 D8653112
Point Sampling Top D8563221 N/A
1' Body D8653010 (350mL) D8653186(80 mL)
2' Body D8653014(700mL) N/A
3' Body D8653015(1050mL) D8653187(240mL)
Extension Coupling D8653013 N/A
Standard Bottom D8653214 D8653113
Bottom Emptying D86531220 N/A
Control Flow Bottom D8651219 D8653116
GROUND WATER SAMPLING BAILERS - TEFLON
A. Standard Top: "V" notched opening for accurate pouring.
B Point Sampling top: Similar to standard top but includes a check valve that closes during sample retrieval, isolating sample at specific depth.
C. Extension Coupling for joining bailer bodies to increase capacity,
D. Bailer Body. Translucent tube for holding sample. Available in 1', 2' & 3' lengths. Capacity can be increased by joining with extension coupling.
E. Standard Bottom: Ball valves seals quickly, prevents leaking and virtually eliminates premature opening.
F. Control Flow Bottom Emptying Assembly: Control valve and tubing detach during sample collection from well. After collecting sample insert valve assembly and use stop-cock to control flow from bottom of bailer into sample vile. Minimizes agitation and aeration.
G. Bottom Emptying Assembly: Bail valve releases when plunger contacts sample collection vessel. Good for rapid purging,
A B
C
F G
D
E
ATLANTIC SCREEN & MANUFACTURING, INC.
ATLANTIC SCREEN, INC PHONE: 302-684-3197 142 BROADKILL ROAD FAX: 302-684-0643 MILTON, DE 19968 Page 37 [email protected] 2019 www.atlantic-screen.com
ATLANTIC SCREEN & MANUFACTURING, INC.
ATLANTIC SCREEN, INC PHONE: 302-684-3197 142 BROADKILL ROAD FAX: 302-684-0643 MILTON, DE 19968 Page 38 [email protected] 2019 www.atlantic-screen.com
Completely inert components and assembly process 1/8” NPT threaded ends with stepped hose adapter on inlet side Ready to use Individually sealed packaging. 12 per case 600 cm pleated element .45 micron, 1.0, & 5.0 micron #GWC 45-600
SingleSample disposable bailers eliminate field cleaning and cross contamination.
DISPOSABLE BAILERS
Item # Description Units
CV 463W .46” x 36” Clear PVC - 85 ml 24
CV 703W .70 X 36” Clear PVC - 200 ml 24
CV 703W .70” X 12” Clear PVC - 200 ml 24
CV 153 1.5” x 36” Clear PVC - 1,025 ml 24
PE 75-SW .75” X 36” Weighted Polyethelene 30
PW-151 1.5” x 1' Polybailer Weighted-342 ml 48
PW-153 1.5” x 36” Weighted Polyethelene – 1,025 ml 24
PE 3-SW 3” x 36” Weighted Polyethelene 9
SST-36-021-W 1.5” X 36” Weighted Teflon 12
SST-12-011-W 1.5” x 12” Weighted Teflon 24
The Single Sample ™
Groundwater Filter
Cartridge features a
stepped hose adapter
on the inlet side for
in- line filtering of
pumped samples.
SingleSample Disposable Groundwater Filter
SingleSample™ Disposable Bailers
ATLANTIC SCREEN & MANUFACTURING, INC.
ATLANTIC SCREEN, INC PHONE: 302-684-3197 142 BROADKILL ROAD FAX: 302-684-0643 MILTON, DE 19968 Page 39 [email protected] 2019 www.atlantic-screen.com
Item # Description
Clear White
CPS67512 WPS67512 3/8” PVC THREADED BAILER, .675 O.D. X 12” LONG
CPS67524 WPS67524 3/8” PVC THREADED BAILER, .675 O.D. X 24” LONG
CPS67536 WPS67536 3/8” PVC THREADED BAILER, .675 O.D. X 36” LONG
CPS84012 WPS84012 1/2” PVC THREADED BAILER, .84 O.D. X 12” LONG
CPS84024 WPS84024 1/2” PVC THREADED BAILER, .84 O.D. X 24” LONG
CPS84036 WPS84036 1/2” PVC THREADED BAILER, .84 O.D. X 36” LONG
CPS105012 WPS105012 3/4” PVC THREADED BAILER, 1.05 O.D. X 12” LONG
CPS105024 WPS105024 3/4” PVC THREADED BAILER, 1.05 O.D. X 24” LONG
CPS105036 WPS105036 3/4” PVC THREADED BAILER, 1.05 O.D. X 36” LONG
CPS131512 WPS131512 1” PVC THREADED BAILER, 1.315 O.D. X 12” LONG
CPS131524 WPS131524 1” PVC THREADED BAILER, 1.315 O.D. X 24” LONG
CPS131536 WPS131536 1” PVC THREADED BAILER, 1.315 O.D. X 36” LONG
CPS166012 WPS166012 1-1/4” PVC THREADED BAILER, 1.660 O.D. X 12” LONG
CPS166024 WPS166024 1-1/4” PVC THREADED BAILER, 1.660 O.D. X 24” LONG
CPS166036 WPS166036 1-1/4” PVC THREADED BAILER, 1.660 O.D. X 24” LONG
CPS237512 WPS237512 2” PVC THREADED BAILER, 2.375 O.D. X 12” LONG
CPS237524 WPS237524 2” PVC THREADED BAILER, 2.375 O.D. X 24” LONG
CPS237536 WPS237536 2” PVC THREADED BAILER, 2.375 O.D. X 36” LONG
CPS350012 WPS350012 3” PVC THREADED BAILER, 3.5 O.D. X 12” LONG
CPS350024 WPS350024 3” PVC THREADED BAILER, 3.5 O.D. X 24” LONG
CPS350036 WPS350036 3” PVC THREADED BAILER, 3.5 O.D. X 36” LONG
POINT SOURCE BAILER
POINT SOURCE BAILER allows sampling at a specific
point within a monitoring well.
Threaded and press fitted construction allows for ease
of decontamination.
Additional 1-foot mid-section(s) may be added at the
center to increase volume
Suspension cord of PTFE coated stainless steel 5/64”
wire or 1/4” polypropylene (order separately)
• Schedule 40 PVC
• Bailers non-returnable
• Quantity Discounts
• Clear or white PVC
ONE FOOT
MIDSECTION MAY BE
ADDED HERE
BALL CHECK
Sample Chamber
Retaining Pin
Retaining Pin
BALL CHECK
ATLANTIC SCREEN & MANUFACTURING, INC.
ATLANTIC SCREEN, INC PHONE: 302-684-3197 142 BROADKILL ROAD FAX: 302-684-0643 MILTON, DE 19968 Page 40 [email protected] 2019 www.atlantic-screen.com
Item # Description
Clear White
CVC67512 WVC67512 3/8” PVC THREADED BAILER, .675 O.D. X 12” LONG
CVC67524 WVC67524 3/8” PVC THREADED BAILER, .675 O.D. X 24” LONG
CVC67536 WVC67536 3/8” PVC THREADED BAILER, .675 O.D. X 36” LONG
CVC84012 WVC84012 1/2” PVC THREADED BAILER, .84 O.D. X 12” LONG
CVC84024 WVC84024 1/2” PVC THREADED BAILER, .84 O.D. X 24” LONG
CVC84036 WVC84036 1/2” PVC THREADED BAILER, .84 O.D. X 36” LONG
CVC105012 WVC105012 3/4” PVC THREADED BAILER, 1.05 O.D. X 12” LONG
CVC105024 WVC105024 3/4” PVC THREADED BAILER, 1.05 O.D. X 24” LONG
CVC105036 WVC105036 3/4” PVC THREADED BAILER, 1.05 O.D. X 36” LONG
CVC131512 WVC131512 1” PVC THREADED BAILER, 1.315 O.D. X 12” LONG
CVC131524 WVC131524 1” PVC THREADED BAILER, 1.315 O.D. X 24” LONG
CVC131536 WVC131536 1” PVC THREADED BAILER, 1.315 O.D. X 36” LONG
CVC166012 WVC166012 1-1/4” PVC THREADED BAILER, 1.660 O.D. X 12” LONG
CVC166024 WVC166024 1-1/4” PVC THREADED BAILER, 1.660 O.D. X 24” LONG
CVC166036 WVC166036 1-1/4” PVC THREADED BAILER, 1.660 O.D. X 24” LONG
CVC237512 WVC237512 2” PVC THREADED BAILER, 2.375 O.D. X 12” LONG
CVC237524 WVC237524 2” PVC THREADED BAILER, 2.375 O.D. X 24” LONG
CVC237536 WVC237536 2” PVC THREADED BAILER, 2.375 O.D. X 36” LONG
CVC350012 WVC350012 3” PVC THREADED BAILER, 3.5 O.D. X 12” LONG
CVC350024 WVC350024 3” PVC THREADED BAILER, 3.5 O.D. X 24” LONG
CVC350036 WVC350036 3” PVC THREADED BAILER, 3.5 O.D. X 36” LONG
ONE FOOT
MIDSECTION MAY BE
ADDED HERE
BALL CHECK
VARIABLE CAPACITY BAILER
Threaded and press fitted construction allows for ease
of decontamination
Additional 1-foot mid-section(s) may be added at the
center to increase volume
Suspension cord of PTFE coated stainless steel 5/64”
wire or 1/4” polypropylene (order separately)
• Schedule 40 PVC
• Bailers non-returnable
• Quantity Discounts
• Clear or white
ATLANTIC SCREEN & MANUFACTURING, INC.
ATLANTIC SCREEN, INC PHONE: 302-684-3197 142 BROADKILL ROAD FAX: 302-684-0643 MILTON, DE 19968 Page 41 [email protected] 2019 www.atlantic-screen.com
ATLANTIC SCREEN & MANUFACTURING, INC.
ATLANTIC SCREEN, INC PHONE: 302-684-3197 142 BROADKILL ROAD FAX: 302-684-0643 MILTON, DE 19968 Page 42 [email protected] 2019 www.atlantic-screen.com
ATLANTIC SCREEN & MANUFACTURING, INC.
ATLANTIC SCREEN, INC PHONE: 302-684-3197 142 BROADKILL ROAD FAX: 302-684-0643 MILTON, DE 19968 Page 43 [email protected] 2019 www.atlantic-screen.com
QUICK CONNECT – Sold Separately
This EX-CAP is only 1” taller than the average locking well plug.
This line drawing illustrates the EX-CAP and its counterpart the Quick Connect. Together, they open the
self-sealing spring loaded valve in the EX-CAP for gas or liquid to be removed, sampled, or pressure
checked, all without removal of the Cap. The EX-CAP is made entirely of a reinforced, chemical resistant
nylon, and has a stainless steel, flip down hasp which allows you to secure the cap with any #1 padlock.
Two sizes: 2” & 4”. The EX-CAP is a permanent remediation tool for the sampling or testing of air & water.
It works with almost any situation involving negative or natural pressure such as vapor extraction systems,
monitoring wells, methane gas, and radon detection. The snap on feature of the EX-CAP is a brass self-
sealing, quick disconnect couple with .28 vacuum (in./Hg.) virtual resistance. It adapts quickly to most any
vapor analyzer, vacuum gauge, or peristaltic pump. It has a pull-away chemical resistant dust cover to
protect the couplings outer face when not connected.
The EX-CAP for “Water” has the ability to provide up to one GPM of fluid or a deep gas sample through its
nylon compression fitting port on the bottom side, where an umbilical tube would be attached and set into
the well at the desired depth.
Comes with 3 stabilizer rods (3/16” diameter) located 24” from the bottom of the well
protector. These rods can be bent to any position to help stabilize the protector during
installation. The entire exterior of the 680XA is coated with an exterior grade primer to resist
corrosion. Manufactured of structural sheet tubing SCH5. Lockable. Quantity discounts
available. Also available in aluminum.
Test Well Cap and Adapter
ABOVE GROUND WELL PROTECTORS
ITEM # Description A B
178XA2 Cap with Adapter 2” 4.25” 2”
178XA4 Cap with Adapter 4” 6.875” 4”
178XAT2 2” with cap chain 4.25” 2”
178XAT4 4” with cap chain 6.875” 4”
178XAB2 2” Threaded 4.25” 2”
178XAB4 4” Threaded 6.875” 4”
Item # Size Wt. Ea.
680XA41 4”x 4”x 5' 24 lbs.
680XA61 6”X 6”x 5' 51 lbs
680XA81 8”X8” X 5' 100 lbs.
The Morrison 178XA consists of aluminum cap and brass adapter.
Adapter has special barbed design to grip permanently when installed
on PVC pipe. Pipe need not be threaded. Fitting has buna-N gaskets
and cast-on “TEST WELL” warning. Works with Sch 40 and Sch 80 PVC
well screen. The 178XAT option provides cap chain link to adapter.
ATLANTIC SCREEN & MANUFACTURING, INC.
ATLANTIC SCREEN, INC PHONE: 302-684-3197 142 BROADKILL ROAD FAX: 302-684-0643 MILTON, DE 19968 Page 44 [email protected] 2019 www.atlantic-screen.com
LOCKS (keyed alike)
11294IDL Dolphin Brass 2001MB Brass Master 2001MG Steel Master
LOCKING PLUG
LOCKING J PLUG
Low Profile Locking Caps
2" Locking Cap 2GLMonitor 4"" Locking Cap 4GLMonitor
PART # SIZE BAILER RING LBS. EACH
678XA2 2” no 0.50
678XA2R 2” yes 0.50
678XA4 4” no 0.75
678XA4R 4” yes 0.75
678XA6 6” no 0.75
678XA6R 6” yes 2.01
678XA4SS 4” Adapter for SS 2.00
LOCK112941DL Brass Locks
2708L 8” 3.00
Size SCH Size SCH
1/2” 40/80 2-1/2” 40/80
3/4” 40 3” 40/80
3/4” 80 4” 40
1” 40/80 4” 80
1-1/4” 40/80 5” 40/80
1-1/2” 40/80 6” 40/80
2” 40 8” 40/80
The 678XA has a bright orange plastic housing, brass
wingbolt, buna-N rim disc and stainless steel lock
lever. This one-piece unit is made to plug, seal and
lock in place on a 2”, 4” or 6” PVC (Sch 40) or
Stainless Steel (Sch 5) pipe without adapter or special
preparation to the pipe. “TEST WELL” warning is
molded to the cap. (Note: 4” plug requires extra
gasket to fit Sch 5 SS pipe)
The “J” Plug is an expandable pressure plug developed to fit inside a
flush threaded riser or casing. On turning the wing bolt, the O-rings
depress and expand to create a water tight seal, assuring against any
contaminates leaking into the well.
* Bailer or tool holder built right in
* Fits Sch 40 PVC and Sch 5 SS pipe
* Made in USA
ATLANTIC SCREEN & MANUFACTURING, INC.
ATLANTIC SCREEN, INC PHONE: 302-684-3197 142 BROADKILL ROAD FAX: 302-684-0643 MILTON, DE 19968 Page 45 [email protected] 2019 www.atlantic-screen.com
Lockable Cap for observation wells
Female NPT thread. Aluminum body
and cap.
Sizes : 2, 2-1/2, 3, 4 inches
Not water tight
Water Tight Locking Conduit Well Caps
Locking Conduit Well Caps
ALUMINUM LOCKING CAP
Other sizes available for 4-1/2" - 10-3/4" Pipe
LOCKABLE CAP
Aluminum Fill Cap-Female Thread
179F2 2” .75 LB
179F2.5 2-1/2” 1 LB
179F3 3” 1 LB
179F4 4” 2 LB
NON-LOCKING TEST PLUGS
Part # Well Cap Size O.D. Of Casing
2ALR 2-3/8” 2-3/8”
3ALR 3-1/2” 3-1/2”
4ALR 4-1/2” 4-1/2”
5ALR 5-5/8” 5-5/8”
6ALR 6-5/8” 6-5/8”
7ALR 7” 7”
8ALR 8-3/4” 8-3/4”
10ALR 10-3/4” 10-3/4”
12ALR 12-3/4” 12-3/4”
Item# Pipe Size Conduit Size
6-5/8"LKWT 6-5/8" 1"
8-3/4LKWT 8-3/4" 1-1/4"
Item # Pipe Size Conduit Size
6LKCC 6" 1"
6-5/8LKCC3/4 6-5/8" ¾"
6-5/8KKCC1 6-5/8" 1"
8-3/4LKCC1 8-3/4" 1"
270-21 1”
270-210 1-1/2”
270-299 2”
270-237 3”
270-245 4”
270-261 6”
270-288 8”
Order all sizes by
O.D. of casing
ATLANTIC SCREEN & MANUFACTURING, INC.
ATLANTIC SCREEN, INC PHONE: 302-684-3197 142 BROADKILL ROAD FAX: 302-684-0643 MILTON, DE 19968 Page 46 [email protected] 2019 www.atlantic-screen.com
SIZE Weight Size Weight
7” X 10” 8 LBS. 12” x 7” 33 lbs
8” x 8” 13.5 LBS 12” x 12” 36 lbs
8” x 12” 17 LBS 18” x 12” 78 lbs
9” x 7” 17 LBS 18” x 18” 86 lbs
9” x 12” 19.5 LBS
Size Weight
9” X 7” 32 lbs
12” X 7” 72 lbs
12” X 7” W/ Alum Cover 60 lbs
ATLANTIC SCREEN & MANUFACTURING, INC.
ATLANTIC SCREEN, INC PHONE: 302-684-3197 142 BROADKILL ROAD FAX: 302-684-0643 MILTON, DE 19968 Page 47 [email protected] 2019 www.atlantic-screen.com
ATLANTIC SCREEN & MANUFACTURING, INC.
ATLANTIC SCREEN, INC PHONE: 302-684-3197 142 BROADKILL ROAD FAX: 302-684-0643 MILTON, DE 19968 Page 48 [email protected] 2019 www.atlantic-screen.com
ATLANTIC SCREEN & MANUFACTURING, INC.
ATLANTIC SCREEN, INC PHONE: 302-684-3197 142 BROADKILL ROAD FAX: 302-684-0643 MILTON, DE 19968 Page 49 [email protected] 2019 www.atlantic-screen.com
ATLANTIC SCREEN & MANUFACTURING, INC.
ATLANTIC SCREEN, INC PHONE: 302-684-3197 142 BROADKILL ROAD FAX: 302-684-0643 MILTON, DE 19968 Page 50 [email protected] 2019 www.atlantic-screen.com
ATLANTIC SCREEN & MANUFACTURING, INC.
ATLANTIC SCREEN, INC PHONE: 302-684-3197 142 BROADKILL ROAD FAX: 302-684-0643 MILTON, DE 19968 Page 51 [email protected] 2019 www.atlantic-screen.com
ATLANTIC SCREEN & MANUFACTURING, INC.
ATLANTIC SCREEN, INC PHONE: 302-684-3197 142 BROADKILL ROAD FAX: 302-684-0643 MILTON, DE 19968 Page 52 [email protected] 2019 www.atlantic-screen.com
ATLANTIC SCREEN & MANUFACTURING, INC.
ATLANTIC SCREEN, INC PHONE: 302-684-3197 142 BROADKILL ROAD FAX: 302-684-0643 MILTON, DE 19968 Page 53 [email protected] 2019 www.atlantic-screen.com
Model No. Size Cover Weight Height Width Weight
13638X10 38” x 10” 51 lb 10-3/4” 36-5/8” 93 lb
13642X10 42” X 10” 51 lb 11-3/4” 42-5/8” 117 lb
13638X10WT 38” x 10” 51 lb 10-3/4” 36-5/8” 93 lb
13642WT 42” x 10” 51 lb 11-3/4” 42-5/8” 117 lb
ATLANTIC SCREEN & MANUFACTURING, INC.
ATLANTIC SCREEN, INC PHONE: 302-684-3197 142 BROADKILL ROAD FAX: 302-684-0643 MILTON, DE 19968 Page 54 [email protected] 2019 www.atlantic-screen.com
SHALE TRAPS
Item # Pipe Size O.D. Of Packer Type Wt. LBS
STSTD25 2” 5” Standard 0.50
STSUP2412 2” 4-1/2” Supreme 0.70
STSUP25 2” 5” Supreme 0.80
STSUP2612 2” 6-1/2” Supreme 1.00
STC2 2” Clamp 0.15
STSUP36 3” 6” Supreme 0.90
STC3 3” Clamp 0.20
STSTD47 4” 7” Standard 0.83
STSUP47 4” 7” Supreme 1.20
STSUP48 4” 8” Supreme 1.30
STSUP4912 4” 9-1/2” Supreme 1.40
STC4 4” Clamp 0.25
STSUP50D7 4-1/2”(5”OD) 7” Supreme 1.30
STSUP50D8 4-1/2”(5”OD) 8” Supreme 1.40
STSUP50D9 4-1/2”(5”OD) 9” Supreme 1.90
STC50D 5” OD Clamp 0.30
STSUP58 5” 8” Supreme 1.40
STSUP59 5” 9” Supreme 1.90
STC5 5” Clamp 0.35
STSD610 6” 10” Standard 1.40
STSUP61012 6” 10” Supreme 3.20
STC6 6” Clamp 0.35
STSUP61411 6-1/4”(6.9”OD) 11” Supreme 2.80
STC614 6-1/4” Clamp 0.35
STSUOP71211* 7-1/2” 11” Supreme 2.50
STC712 7-1/2” Clamp 0.35
STSUP814 8” 14” Supreme 4.60
STC8 8” Clamp 0.35
STSUP101614 10” 16-1/4” Supreme 5.50
STC10 10” Clamp 0.40
STSUP1220 12” 20” Supreme 10.20
STC12 12” Clamp 0.40
Shale Traps (Formation Packers)
• For all sizes of casing & bore holes
• Available in soft and hard rubber
• Designed for grouting between casing
and bore hole but have been used for
numerous applications
• Constructed from neoprene rubber for
elasticity and strength
• Attaches to casing with stainless steel
ATLANTIC SCREEN & MANUFACTURING, INC.
ATLANTIC SCREEN, INC PHONE: 302-684-3197 142 BROADKILL ROAD FAX: 302-684-0643 MILTON, DE 19968 Page 55 [email protected] 2019 www.atlantic-screen.com
Size K-Packer Tri-Seal Weld On
Pipe Nom.
Casing
Dia.
R x R R X L ITEM # ITEM # ITEM #
1-1/4” 2” S S KP**1142 S KPB1142
1-1/4” 3” S S KP**1143 S KPB1143
1-1/4” 4” S S KP**1144 S KPB1144
2” 3” S S KP**23 S KPB23 A KPWO23
2” 4” S S KP**24 S KPB24 A KPWO24
2” 4-1/2” S S KP**2412 S KPB25 A KPWO2412
2” 5” S S KP**25 S KPB1143 A KPWO25
2-1/2” 4” S S KP**2124 S KPB1143 A KPWO2124
** Insert RR for Right by Right or RL for Right by Left
Size K-Packer Tri-Seal Weld On
Size Nom. Casing
Dia.
R x R R X L ITEM # ITEM # ITEM #
2-1/2” 5” S S KP**2125 S KPB2125 KPWO2125
3” 4” S S KP**34 S KPB34 KPWO34
3” 4-1/2” S S KP**3412 S KPB3412 KPW3412
3” 4-3/4” S S KP**3434 S KPB3434 KPWO3434
3” 5' S S KP**35 S KPB35 KPWO35
3” 5 SDR17 S S KP**35OS S KPB35OS KPWO35OS
3” 6” S S KP**36 S KPB36 KPWO36
4” 5” S S KP**45 S KPB45 S KPWO45
4” 5-1/8” S S KP**4518 S KPB4518 A KPWO4518
4” 5-5/8” S S KP**4558 S KPB4558 A KPWO4558
4” 6” S S KP**46 S KPB46 S KPWO46
4” 6-1/4” S A KP**4614 S KPB4614 A KPWO4614
4” 8” S A KP**48 S KPB48 A KPWO48
5” 6” S A KP**56 S KPB56 A KPWO56
5” 6-1/4” S S KP**5614 S KPB5614 A KPWO5614
5” 6-5/8” S A KP**5658 A KPB5658 S KPWO5658
5” 8” S A KP**58 S KPB58 S KPWO58
6” 8” S A KP**68 S KPB68 A KPWO68
6” 8-1/4” S S KP**6814 A KPB6814 KPWO6814
6” 9” A A KP**69 A KPB69 A KPWO69
6” 10” S A KP**610 S KPB610 S KPWO610
8” 10” S S KP**810 A KPB810 S KPWO810
8” 12” S S KP**812 A KPB812 S KPWO812
10” 12” S S KP**1012 A KPB1012 S KPWO1012
12” 14” KP**1214 KPB1214 S KPWO1214
12” 16” KP**1216 A KPB1216 S KPWO1216
14” 16” KP**1416 A KPB1416 S KPWO1416
** Insert RR for Right by Right or RL for Right by Left S = Stock A= Available Call for additional length
Designed to seal in Sch 40 pipe unless stated
otherwise. Can be furnished in Stainless Steel.
Provides a “sand tight” seal between screen and
casing. Used for many applications in water well,
construction, and environmental industry.
Constructed from neoprene rubber being vulcanized
and bonded under heat and pressure to coupling or
pipe in standard (70 durometer) or soft rubber(50
durometer).
ATLANTIC SCREEN & MANUFACTURING, INC.
ATLANTIC SCREEN, INC PHONE: 302-684-3197 142 BROADKILL ROAD FAX: 302-684-0643 MILTON, DE 19968 Page 56 [email protected] 2019 www.atlantic-screen.com
DOUBLE LOCKING PACKER
Item #
I.D. of Pipe
Well Diameter
Type of Pipe
S1020L* 1” 2” STEEL
S1220L 1-1/4” 2” STEEL
P1220L 1-1/4" 2 PVC
P1530L 1-1/2" 3 PVC
S1530L 1-1/2” 3” STEEL
P1532L 1-1/2" 3-1/4" PVC
S1532L 1-1/2" 3-1/4" STEEL
P2040L 2” 4” PVC
S2040L 2” 4” STEEL
P2540L 2-1/2" 4" PVC
P3040 3 4 PVC
P3040L 3 4 PVC
S3040 3 4 STEEL
S3040L 3 4 STEEL
P3050 3 5 PVC
P3050L 3 5 PVC
S3050 3 5 STEEL
S3050L 3 5 STEEL
P4050 4” 5” PVC
P4050L 4” 5” PVC
S4050 4” 5” STEEL
S4050L 4” 5” STEEL
P4056 4” 5-5/8” PVC
P4056L 4” 5-5/8” PVC
S4056 4-1/4” 5-5/8” STEEL
S4056L 4-1/4” 5-5/8” STEEL
P4060 4” 6" PVC
P4060L 4” 6" PVC
S4260 4-1/4” 6" STEEL
S4260L 4-1/4” 6" STEEL
P4067 4” 6-3/4" PVC
P4067L 4” 6-3/4" PVC
S4267 4-1/4” 6-3/4" STEEL
S4267L 4-1/4” 6-3/4" STEEL
Item #
I.D. of Pipe
Well Diameter
Ttype of Pipe
P4562 4*1/2" 6-1/4" PVC
P4562L 4*1/2" 6-1/4" PVC
P5062 4-1/2"” 6-1/4” PVC
P5062L 4-1/2" 6-1/4” PVC
S5262 5-.1875 6-1/4” STEEL
S5262L 5.1875” 6-1/4” STEEL
P6080 6” 8” PVC
P6080L 6” 8” PVC
S6280 6-1/4” 8” STEEL
S6280L 6-1/4” 8” STEEL
P6287 6-1/4” 8-3/4” PVC
P6287L 6-1/4” 8-3/4” PVC
S6587 6-1/2" 8-3/4” STEEL
S6587L 6-1/2" 8-3/4” STEEL
P80100 8” 10” PVC
P80100L 8” 10” PVC
S80100 8” 10” STEEL
S80100L 8” 10” STEEL
ATLANTIC SCREEN & MANUFACTURING, INC.
ATLANTIC SCREEN, INC PHONE: 302-684-3197 142 BROADKILL ROAD FAX: 302-684-0643 MILTON, DE 19968 Page 57 [email protected] 2019 www.atlantic-screen.com
These products repel water and water-based liquids and float on water. Even after being saturated with hydrocarbons.
OIL ONLY ABSORBENTS – ON WATER
BOOMS
• Contain & absorb oil spills on water
• Available in : Spaghetti – for thick oils or Sock & Net for no linting
• All booms come complete with end rings & snaps for easy connection, rope throughout & washers to support weight and net for extra strength
• Absorbency of 10:1
• Also available in a variety of lengths & grime hiding gray
BOWSPS 10-4 5” X 10' Sock & Net Booms 4/Bale
BOWSP810-4 8” x 10' Sock & Net Booms 4/Bale
TOWEP510-4 5” x 10' Spaghetti Booms 4/Bale
TOWEP810-4 8” x 10' Spaghetti Booms 4/Bale
BOGSP510-4 5” x 10' Gray Sock & Net Booms 4/Bale
BOGSP810-4 8” x 10' Gray Sock & Net Booms 4/Bale
Bilge Buoys
• Place in bilge of boat to remove fuels • Has loops on both ends for easy tie off
GOWSP515-12 5” x 15” Bilge Buoy
Oil Snare
• Throw on water to capture globs of thick crude oil
• Helpful with oil/water separation
• Handy for sandy areas, rocky beaches and marshes
• Rope & Boom snares can be secured to shoreline
• Boom Snare offers no gaps and acts as a filter fence
• Booms absorb over 30 gallons of viscous oil
SOS-30 Oil Snare 30/Pack
SOR-30 Oil Snare as 50' Rope 30/Pack
SOB-50 Oil Snare as 50' Boom 30/Pack
ATLANTIC SCREEN & MANUFACTURING, INC.
ATLANTIC SCREEN, INC PHONE: 302-684-3197 142 BROADKILL ROAD FAX: 302-684-0643 MILTON, DE 19968 Page 58 [email protected] 2019 www.atlantic-screen.com
Seamless, knitted filter fabric. Filtration opening size for plush fabric us 250 microns. Filtration
opening size for plush fabric is 250 microns. Filtration opening size for regular knit fabric is 600
microns. Developed specifically for groundwater monitoring and remediation. Vertical and horizontal
applications. Open pit and tank installations. Helps prevent well failures. Highly resistant to most
chemicals including strong and weak acids and alkalines, organic chemicals, and salt solutions. Widely
recommended by environmental professionals. Unequaled durability when compared to non-woven
materials. Allows high rate of water or chemical flow while filtering out fine particles.
FILTER SOCKS
OIL ONLY ABDORBENTS - LAND
ITEM # DESCRIPTION
FS1 1” Polyester filter sock – 100' roll – 250 micron plush fabric
FS2 2” & 3” Polyester filter sock – 100' roll – 250 micron plush fabric
FS4 4” Polyester filter sock – 100' roll – 250 micron plush fabric
FS6 6” Polyester filter sock – 100' roll – 250 micron plush fabric
FS8 8” Polyester filter sock – 100' roll – 250 micron plush fabric
FS10 10” Polyester filter sock – 100' – 600 micron regular knit fabric
FS12 12” Polyester filter sock – 100' – 600 micron regular knit fabric
BS3 3” Black Sock 1000' rolls 600 micron
DS3 3” Drain 600 micron Sleeve for perforated pipe 100'
ATLANTIC SCREEN & MANUFACTURING, INC.
ATLANTIC SCREEN, INC PHONE: 302-684-3197 142 BROADKILL ROAD FAX: 302-684-0643 MILTON, DE 19968 Page 59 [email protected] 2019 www.atlantic-screen.com
HAZMAT ABSORBENT
SUGKP34-30 Gray Poly Socks 3” x 4' 30/Box
SUGKP310-12 Gray Poly Socks 3” x 10' 12/Box
SUGKC34-30 Gray Cellulose Socks 3” x 4' 30/Box
SUWKO346-40 Corn Cob Socks 3” x 40” 40/Box
Wringable Pads & Socks
Absorb non-aggressive fluids oil, fuel, solvents, water, antifreeze. • Use in areas where reclaiming liquid is desired
• Wring out & reuse to save on disposal costs
• Strong durable fabric that returns to original size
• Filled with recycled cellulose
• Use with Extractor Wringer
• Socks have stitched ends so they won't damage wringer PUGNS1218-20 Gray Wringable Pillows 12” x 18” 20/Box SUGNS44-20 Gray Wringable Socks 4” x 4” 20/Box
Wrap around areas where seepage may occur Low lint knit sleeve Flexible and lays flat to prevent seepage Quick wicking and absorbs throughout Available in a variety of colors and lengths
SOCKS
ATLANTIC SCREEN & MANUFACTURING, INC.
ATLANTIC SCREEN, INC PHONE: 302-684-3197 142 BROADKILL ROAD FAX: 302-684-0643 MILTON, DE 19968 Page 60 [email protected] 2019 www.atlantic-screen.com
Ordering Information Solinst water level meters with P2 Probe Lengths from 50' to 3000' Part No. Description 10150 50' **** *** 1013000 3000'
ATLANTIC SCREEN & MANUFACTURING, INC.
ATLANTIC SCREEN, INC PHONE: 302-684-3197 142 BROADKILL ROAD FAX: 302-684-0643 MILTON, DE 19968 Page 61 [email protected] 2019 www.atlantic-screen.com
ATLANTIC SCREEN & MANUFACTURING, INC.
ATLANTIC SCREEN, INC PHONE: 302-684-3197 142 BROADKILL ROAD FAX: 302-684-0643 MILTON, DE 19968 Page 62 [email protected] 2019 www.atlantic-screen.com
Other sizes available.
Also available in Steel
ATLANTIC SCREEN & MANUFACTURING, INC.
ATLANTIC SCREEN, INC PHONE: 302-684-3197 142 BROADKILL ROAD FAX: 302-684-0643 MILTON, DE 19968 Page 63 [email protected] 2019 www.atlantic-screen.com
ITEM # SIZE
1146M 1-1/4” X 6” male
11497 1-1/4” X 9” female
114127 1-1/4” x 12” female
1142M 1-1/4” x 12” male
FOR USE WITH JET PUMP
DOWN HOLEPACKER
PACKER ADAPTER
PVC
Jet Pump
ATLANTIC SCREEN & MANUFACTURING, INC.
ATLANTIC SCREEN, INC PHONE: 302-684-3197 142 BROADKILL ROAD FAX: 302-684-0643 MILTON, DE 19968 Page 64 [email protected] 2019 www.atlantic-screen.com
QUICKGEL™
QG Quik-Gel™ 50 LB
Material Wyoming bentonite, non-treated sodium montmorillonite
Use Gel-forming colloidal clay used to improve hole cleaning, reduce filtrate loss, form a thing
impermeable filter cake on borehole.
Features Premium quality containing only ground sodium bentonite clay, no polymers or chemical additives
2.7 specific gravity, 200-mesh grind, environmentally compatible, yields 91 barrels per ton. Container 50 pound (22.7 kg), 48 per skid
BENSEAL™
B650 Benseal™ or PDSCO Grout- 50LB
Material Inorganic catalyst used with BENSEAL for pump-able grout
Use Added to water for retarding set-time of BENSEAL product to allow placement in annular space Features Inorganic, non-fermenting, white powder, easily dispersible in water, environmentally safe.
Container 50 pound bag, 48 per skid
HOLEPLUG™ HP3/8 HolePlug™ or PDS Plug 50LB Material Wyoming bentonite, non-treated sodium montmorillonite
Use Plug and abandon boreholes, forms a semi-rigid plug between hole and production tubing
Features Non-treating, 3/8” chunks, naturally occurring so has not been mechanically stressed, does not bridge
easily downhole, will fall through column of standing water, re-hydrates after atmosphere drying. Container 50 pound (22.7 kg) multi-wall paper bag, 48 per skid
BENTONITE TABLETS BP 38 Bentonite Pellets 50lb 3/8” BP 14 Bentonite Pellets 50lb 1/4” BPC 3/8” Bentonite Coated Pellets 50LB
Material Bentonite – a hydrous silicate of alumina comprised essentially of the clay mineral montmorillonite.
Contains small portions of feldspar, biotite, selenite, etc.
Features A pre-formed compressed tablet made of high-swelling sodium bentonite. PH: 8.5 to 10.5- Coated available.
Use Forms a flexible, permanent, non-toxic seal where water flows and hydro-static pressures are involved.
Container 50 lb. Plastic Pails or Granular Bentonite,- 36 per skid
SODA ASH
Use To raise water PH Container 50 lb. Bag, 54 per skid or 50 lb. pail, 36 pails per skid
ATLANTIC SCREEN & MANUFACTURING, INC.
ATLANTIC SCREEN, INC PHONE: 302-684-3197 142 BROADKILL ROAD FAX: 302-684-0643 MILTON, DE 19968 Page 65 [email protected] 2019 www.atlantic-screen.com
SAND and WELL GRAVEL
50 LB Washed sand #0, #1, #2, or #3 Sieve size Sandblasting sand 00 or 000 - 80 lb or 100 lb. All sand and gravel also available in super sacks.
EZ Mud™
EZMUD EZMUDGOLD EZMUDDP Clay Stabilizer
USE Primarily as a borehole stabilizer to prevent reactive shale and clay from swelling and sloughing..
Also used to increase lubricity, fluid viscosity, and to improve carrying capacity of air/foam injection fluids.
Container EZ MUD POLYMER Emulsion 1 gallon (4 to a case) EZ Mud Gold Clay and Shale Stabilzer 10-lb plastic flip-top container EZ Mud DP Dry Polymer Clay Stabilizer 14 lb. re-sealable plastic container
KOPR-KOTE™
KOPR
USE Drill collar and tool joint compound. Non-corrosive, sticks to steel. Brushable at low temperatures. Container 1 gal pail
NO SAG NOSAG Use Enhances carrying capacity of both clay and polymer based drilling fluids without significantly increasing viscosity Container 10 each 2 lb bags packed in plastic bucket
ATLANTIC SCREEN & MANUFACTURING, INC.
ATLANTIC SCREEN, INC PHONE: 302-684-3197 142 BROADKILL ROAD FAX: 302-684-0643 MILTON, DE 19968 Page 66 [email protected] 2019 www.atlantic-screen.com
PVC PIPE SPECIFICATIONS
Bell and Gasket PVC Pipe is available in Schedule 40, 80 ( ASTM D-1785 ) Also available in SDR's 21, 35, 41 and C-900 Compounds used in the manufacture of PVC and CPVC pipe -ASTM D-1784 Pressure Rated (SDR Series) PVC Pipe meets ASTM D-2241 ASTM Standard D-1784 classification equivalents: PVC Normal Impact – Type I Grade I - PVC 1120 – Cell Classification 12454-B
ATLANTIC SCREEN & MANUFACTURING, INC.
ATLANTIC SCREEN, INC PHONE: 302-684-3197 142 BROADKILL ROAD FAX: 302-684-0643 MILTON, DE 19968 Page 67 [email protected] 2019 www.atlantic-screen.com
IN-LINE STATIC MIXER WITH CATALYST QUALITIES SINGLE OR OPTIONAL DUAL INJECTION
ATLANTIC SCREEN & MANUFACTURING, INC.
ATLANTIC SCREEN, INC PHONE: 302-684-3197 142 BROADKILL ROAD FAX: 302-684-0643 MILTON, DE 19968 Page 68 [email protected] 2019 www.atlantic-screen.com
No. Description Size
7B-2494 Alconox 4 lb. Box
7B-6978 Alconex 25 lb. Box
7B-12768 Liqui-Nox 1 Quart
7B-12769 Liqui-Nox 1 Gallon
7B-25070 Alcojet 4 lb. Box
7B-25072 Citranox 1 Gallon
7B-25073 Nalgene™ L900 1 Liter
7B-25074 Nalgene™ L900 4 Liters
ATLANTIC SCREEN & MANUFACTURING, INC.
ATLANTIC SCREEN, INC PHONE: 302-684-3197 142 BROADKILL ROAD FAX: 302-684-0643 MILTON, DE 19968 Page 69 [email protected] 2019 www.atlantic-screen.com