PRODUCT CATALOG 2015 - Global Teknik EnergiThe basic building block of PV technology is the solar...
Transcript of PRODUCT CATALOG 2015 - Global Teknik EnergiThe basic building block of PV technology is the solar...
I C A S O L A R ® P R O D U C T C A T A L O G | 2 0 1 5
PRODUCTCATALOG2015
1. What is Solar PV ?
1.1 - Introduction of Solar Photovoltaic
1.2 - Benefit of PV System
2. Product Categories
3. Types of Solar PV Diagram
3.1 - Grid Tied ( On-Grid )
3.2 - Stand Alone ( Off-Grid )
3.3 - Hybrid ( Multiple Power Sources )
4. Product Categories
4.1 - Solar PV Modules
4.2 - Solar Inverter
4.3 - Solar Charger Controller
4.4 - Solar Battery
5. ICA® PV System
5.1 - Grid-Tied PV Systems
5.2 - Stand Alone PV Systems
5.3 - Hybrid PV Systems
5.4 - F.A.Q.
5.5 - Proposal Process
6. ICA® Solar Philosophy
6.1 - What makes us different
7. Company Overview
8. Contact Details
THE FUTURE IS GREEN ENERGY, SUSTAINABILITY AND RENEWABLE ENERGY. THE FUTURE AWAITS HERE.
TABLE OFCONTENT
2
WHAT ISSOLARPV ?
3
Photovoltaic (PV) systems convert sunlight directly to electricity that can be
stored in a battery or fed back into the utility grid (i.e. PLN). They work
anytime the sun is shining, but more electricity is produced when the
sunlight is more intense. PV allows you to produce electricity— without noise
or air pollution—from a clean, renewable resource.
The basic building block of PV technology is the solar “cell.” Multiple PV cells are connected to form a PV “module”.
Modules range in power output from about 10 watts to 300 watts. A PV system connected or “tied” to the utility grid
has these components:
• One or more PV modules, which are connected to an inverter
• The inverter, which converts the system's direct-current (DC) electricity to alternating current (AC)
• Batteries (optional) to provide energy storage or backup power in case of a
alternating current (AC) power interruption or outage on the grid.
What is the difference between solar PV and solar thermal?
Unlike solar thermal systems for heating water, PV does not use the sun’s heat to make electricity. Instead, electrons
freed by the interaction of sunlight with semiconductor materials in PV cells are captured in an electric current.
Why should you invest in a PV system?
People decide to invest in PV systems for a variety of reasons. Some people want to help preserve the Earth's finite
fossil-fuel resources and reduce air pollution. Others want to invest in an energy-producing improvement to their
property. Some people like the security of reducing the amount of electricity they buy from their utility because it
makes them less vulnerable to future price increases. And some people just appreciate the independence that
a PV system provides.
4
Grid Tied SNV-GT-TM10KW - 20KW
Grid Tied SNV-GT-DM5KW
Grid Tied SNV-GT-SM1KW - 3KW
WiFi Data Logger
PRODUCTCATEGORIES
Monocrystalline 20Wp - 200Wp
Polycrystalline50Wp - 250Wp
SOLAR PANELPV MODULE
ON-GRIDINVERTER
STI512 STI1024
DC INVERTER
OFF-GRIDHYBRIDINVERTER
SNV-GFW-0.5KW - 2.4KW SNV-HYW-1KW - 3KWSNV-GFT-3KW - 8KW SNV-GFT-10KW-120KW
5
Shine 10A, 12V/24V LAT-NL 10A - 20A LS 1024R & 2024R10A - 20A
TRACER MPPT 10A - 30A iTRACER MPPT 30A - 60A
SOLAR CHARGERCONTROLLER
PRODUCTCATEGORIES
SOLARACCESSORIES
PJU Box MT-50 DisplayController
MC4 Solar Connector PV Combiner Box
SOLARBATTERY
Deep Cycle Series55Ah - 250Ah
OPzS Series (2V)800Ah - 2500Ah
OPzV Series (2V)800Ah - 2500Ah
PV MOUNTINGALUMINIUM
End Clamp Mid Clamp Rail Joint Hook
Bracket Rall
6
1000 Watt
PRODUCTCATEGORIES
MOUNTING1500 Watt
Hook and End Clamp Hook and Mid Clamp
Hook, Joint, Mid Clamp Installed
MOUNTING
Hook and End Clamp Hook and Mid Clamp
Hook, Joint, Mid Clamp Installed
MOUNTING500 Watt
Hook and End Clamp Hook and Mid Clamp
Hook, Joint, Mid Clamp Installed
7
PRODUCTCATEGORIES
SHS DC SERIES
SOLAR STREET LIGHT
PJUE30W-S PJUE50W-S
ON GRID INSTALLATION IN INDONESIA
PJUE60W-S PJUE100W-S
SHS 12212V/7Ah (2 Unit)
SHS 12312V/7Ah (3 Unit)
SHS AC SERIES
SHS 1205l 12VDC/220VACBattery external
SHS12305l12VDC/220VACBattery internal (3 Unit)
8
COMPLETESOLAR HOME SYSTEMPORTABLE DC
PRODUCTCATEGORIES
PACKAGE OFF-GRIDSOLAR PV SYSTEM
Installed
SHS122C SHS123C
SHS1205IC SHS12305IC
COMPLETESOLAR HOME SYSTEMPORTABLE AC
SNV-GFW0.5KWC (2 Unit Solar Panel)1KWC (4 Unit Solar Panel)2KWC (6 Unit Solar Panel)
SNV-GFT3KWC (12 Unit Solar Panel)5KWC (20 Unit Solar Panel)8KWC (32 Unit Solar Panel)
9
The typical monocrystalline solar cell is a dark black colour, and the corners of cells are
usually missing as a result of the production process and the physical nature of
monocrystalline silicon.
SOLAR PANELPV MODULE
MONOCRYSTALLINE
135Wp80Wp
50Wp 20Wp
10
TECHNICAL SPECIFICATION
TECHNICAL SPECIFICATIONMONOCRYSTALLINE
H
50 Wp
GRADE
TOLERANCE
PMAX
VMP
IMP
VOC
ISC
SIZE (L x W x H)
WEIGHT
CERTIFICATION
GUARANTEE
A
+3%
50W
18.20V
2.75A
22.35V
2.95A
630 x 540 x 30mm
4.2kg
ISO9001ISO14001
OHSAS18000
15 years - 90%nominal power rating
25 years - 80%nominal power rating
80 Wp
A
+3%
80W
17.80V
4.54A
22.20V
4.88A
1010 x 670 x 30mm
6.5kg
ISO9001ISO14001
OHSAS18000
15 years - 90%nominal power rating
25 years - 80%nominal power rating
100 Wp
A
+3%
100W
18.60V
5.38A
21.70V
5.77A
1200 x 540 x 30mm
8kg
ISO9001ISO14001
OHSAS18000
15 years - 90%nominal power rating
25 years - 80%nominal power rating
135 Wp
A
+3%
135W
17.20V
7.85A
21.10V
8.34A
1480 x 670 x 35mm
12kg
ISO9001ISO14001
OHSAS18000
15 years - 90%nominal power rating
25 years - 80%nominal power rating
200 Wp
A
+3%
200W
30.10V
6.65A
36.10V
7.08A
1330 x 990 x 35mm
16kg
ISO9001ISO14001
OHSAS18000
15 years - 90%nominal power rating
25 years - 80%nominal power rating
Polycrystalline panels are made up from the silicon offcuts, moulded to form blocks and create a cell made up of
several bits of pure crystal and it is identifieable by its signature light or dark blue colour, but not uniformly some
patches are lighter than others. The differences in appearance come about as a result of the manufacturing process.
However, this mis-alignment can help in some circumstances, because the cells work better from light at all angles,
in low light, etc.
SOLAR PANELPV MODULE
POLYCRYSTALLINE
250Wp
100Wp
50Wp
11
12
TECHNICAL SPECIFICATIONPOLYCRYSTALLINE
TECHNICAL SPECIFICATION
H
GRADE
TOLERANCE
PMAX
VMP
IMP
VOC
ISC
SIZE (L x W x H)
WEIGHT
CERTIFICATION
GUARANTEE
50 Wp
A
+3%
50W
18.50V
2.75A
22.63V
2.95A
670 x 530 x 30mm
4.4kg
ISO9001ISO14001
OHSAS18000
15 years - 90%nominal power rating
25 years - 80%nominal power rating
100 Wp
A
+3%
100W
18.20V
5.50A
22.63V
5.88A
1020 x 670 x 30mm
8kg
ISO9001ISO14001
OHSAS18000
A
+3%
135W
17.40V
7.76A
21.90V
8.00A
12kg
135 Wp
1480 x 670 x 35mm
ISO9001ISO14001
OHSAS18000
200 Wp
A
+3%
200W
26.20V
7.64A
32.80V
8.00A
1480 x 990 x 35mm
18kg
ISO9001ISO14001
OHSAS18000
80 Wp
A
+3%
100W
19.60V
4.10A
23.90V
4.38A
850 x 670x 30mm
7kg
ISO9001ISO14001
OHSAS18000
15 years - 90%nominal power rating
25 years - 80%nominal power rating
250 Wp
A
+3%
250W
31.20V
8.02A
37.90V
8.45A
1650 x 992 x 40mm
20kg
ISO9001ISO14001
OHSAS18000
15 years - 90%nominal power rating
25 years - 80%nominal power rating
15 years - 90%nominal power rating
25 years - 80%nominal power rating
15 years - 90%nominal power rating
25 years - 80%nominal power rating
15 years - 90%nominal power rating
25 years - 80%nominal power rating
13
SOLAR INVERTER
GRID-TIED SNV-GT-SM
Transformer-less design and compact in size
IP65 Protection Class
Firmwire is upgradeable via RS232 Port
Optional DC switch available
Comply with latest VDE AR N1405 standard
MPPR Efficiency > 99.9%
Maximum Efficiency > 97.6%
Mimic LCD Display
Versatile communication interface options,standard RS485 port and external WiFi andEthernet devices.
Monitoring software offers operational statusand electricity generated data.
150 200 250 300 350 400
99989796959493
Euro efficiency 96.7%California efficiency 97.0%
+
-
Communication interface RS485,Wifi (optional)
PROTECTION CIRCUIT
RELAY PE
L
N
DC SWITCH
DCEMC
FILTER
MPPTBOOST
CIRCUIT
INVERTCIRCUIT
ACREACTOR
DC IN
PUT
GIRD
ACEMC
FILTER
Intelligent monitoring software and LCD display
ON-GRID
14
GRID-TIED SNV-GT-SMSolar Inverter
TECHNICAL SPECIFICATION
MODEL SNV-GT-1501SM SNV-GT-2001SM SNV-GT-3001SM SNV-GT-3601SM
1800 W 2400 W
500 Vdc
1
150 ~ 450 Vdc ( Rated Voltage 360 Vdc )
230 Vac
1
184 ~ 276 Vac
3300 W 4000 W
1500 W 2000 W 3000 W 3600 W
1650 W 2200 W 3100 W 3700 W
>96.3% >96.9% > 97.5% > 97.6%
>96.0% >96.0% >96.5% >96.6%
9 A 11 A 17 A 20 A
INPUTMAX. DC INPUT POWER
MAX. DC INPUT VOLTAGE
MPPT TRACKING VOLTAGE RANGE
NUMBER OF MPPT TRACKING
MAX. INPUT CURRENT for each tracking
OUTPUTRATED OUTPUT POWER
MAX. AC OUTPUT POWER
RATED OUTPUT VOLTAGE
OUTPUT VOLTAGE RANGE
GRID FREQUENCY RANGE 50/60Hz (±5Hz), (adjustable)
RATED OUTPUT CURRENT 6.5 A 8.7 A 13 A 15.6 A
MAX. OUTPUT CURRENT 9 A 11 A 15 A 18 A
POWER FACTOR ( COS Φ )
THDi <3%
99.9%
<0.2 W
-20°C~60°C
335 X 580 X 170
0 ~ 95% (non-condensing)
SYSTEM FEATURESMAX. EFFICIENCY
EURO EFFICIENCY
MPPT EFFICIENCY
STANDBY (NIGHT TIME) LOSSES
DC SWITCH Optional
RS485 standard, external WiFi or Ethernet (optional)COMMUNICATION INTERFACE
ENVIRONMENTALOPERATING TEMPERATURE
HUMIDITY RANGE
ALTITUDE 2000m
NOISE LEVEL <25dB (1 meter from surface)
PROTECTION RATING IP65
PHYSICAL
SHIPPING WEIGHT (KG) 15.8 18.2
STANDARDS
SAFETY IEC/EN62109-1,IEC/EN62109-2,VDE0126-1-1, VDE AR N4105, G83/59/EEG2012,
AS3100/4777,CEI 0-21,CNCA/CTS0006:2010,CNCA/CTS0004:2009A,etc EMC
Specifications subject to change without prior notice
EN61000-6-2, EN61000-6-3,etc
DIMENSION W x H x D ( mm )
ON-GRID
15
DIMENSION
MODEL SNV-GT-1501SM SNV-GT-2001SM SNV-GT-3001SM SNV-GT-3601SM
A
B
BA C D
E
170 170 170 170
580 580 580 580
435 435 435 435
397 397 397 397
335 335 335 335
240 240 240 240
DIMENSION SNV-GT-SMSolar Inverter
ON-GRID
16
SOLAR INVERTER
GRID-TIED SNV-GT-DM
Transformer-less design and compact in size
IP65 Protection Class
Double MPPT Design for application demand
Firmwire is upgradeable via RS232 Port
Optional DC switch available
Comply with latest VDE AR N1405 standard
MPPR Efficiency > 99.9%
Maximum Efficiency > 97.6%
Mimic LCD Display
Versatile communication interface options,standard RS485 port and external WiFi andEthernet devices.
Monitoring software offers operational statusand electricity generated data.
150 200 250 300 350 400
99989796959493
Euro efficiency 96.7%California efficiency 97.0%
RELAY
DC SWITCH
DCEMC
FILTER
DCEMC
FILTER
MPPT1BOOST
CIRCUIT
MPPT2BOOST
CIRCUIT
INVERTCIRCUIT
ACREACTOR
GIRD
ACEMC
FILTER
Communication interface RS485,Wifi (optional)
DC IN
PUT 1
DC IN
PUT 2
Intelligent monitoring software and LCD display
PROTECTION CIRCUIT
ON-GRID
17
GRID-TIED SNV-GT-DMSolar Inverter
TECHNICAL SPECIFICATION
MODEL SNV-GT-3001DM SNV-GT-3601DM SNV-GT-4201DM SNV-GT-5001DM
3300 W 4000 W
600Vdc
2
150 ~ 500Vdc ( Rated voltage 360Vdc )
230 Vac
0.9 leading-0.9 lagging
184 ~ 276 Vac
4600 W 5500 W
3000 W 3600 W 4200 W 5000 W
3100 W 3700 W 4300 W 5100 W
> 97.4% > 97.4% > 97.5% > 97.6%
> 96.6% > 96.7% > 96.8% > 96.8%
9 A×2 11 A×2 13 A×2 15 A×2
INPUTMAX. DC INPUT POWER
MAX. DC INPUT VOLTAGE
MPPT TRACKING VOLTAGE RANGE
NUMBER OF MPPT TRACKING
MAX. INPUT CURRENT for each tracking
OUTPUTRATED OUTPUT POWER
MAX. AC OUTPUT POWER
RATED OUTPUT VOLTAGE
OUTPUT VOLTAGE RANGE
GRID FREQUENCY RANGE 50/60Hz (±5Hz), (adjustable)
RATED OUTPUT CURRENT 13 A 15.6 A 18.3 A 21.7 A
MAX. OUTPUT CURRENT
POWER FACTOR ( COS Φ )
THDi <3%
>99.9%
<0.2 W
-20°C~60°C
395 X 637 X 180
0 ~ 95% (non-condensing)
SYSTEM FEATURESMAX. EFFICIENCY
EURO EFFICIENCY
MPPT EFFICIENCY
STANDBY (NIGHT TIME) LOSSES
DC SWITCH Optional
RS485 standard, external WiFi or Ethernet (optional)COMMUNICATION INTERFACE
ENVIRONMENTALOPERATING TEMPERATURE
HUMIDITY RANGE
ALTITUDE 2000m
NOISE LEVEL <25dB (1 meter from surface)
PROTECTION RATING IP65
PHYSICAL
SHIPPING WEIGHT (KG) 23.5 25.8
STANDARDS
SAFETY IEC/EN62109-1,IEC/EN62109-2,VDE0126-1-1, VDE AR N4105, G83/56/EEG2012,
AS3100/4777,CEI 0-21, CNCA/CTS0006:2010,CNCA/CTS0004:2009A,etc EMC
Specifications subject to change without prior notice
EN61000-6-2, EN61000-6-3,etc
DIMENSION W x H x D ( mm )
15 A 18 A 21 A 24 A
ON-GRID
18
DIMENSION
MODEL SNV-GT-3001DM SNV-GT-3601DM SNV-GT-4201DM SNV-GT-5001DM
A
B
BA
C
D
E
180
637
435
439
395
180
637
435
439
395
252 252
180
637
435
439
395
252
180
637
435
439
395
252
DIMENSION SNV-GT-DMSolar Inverter
ON-GRID
SOLAR INVERTER
GRID-TIED SNV-GT-TM
MPPT efficiency >99.9%
Maximum efficiency >98.2%
Three independent MPP tracking gains optimal energy harvesting
Low sensitivity to grid disturbances to avoid undesired disconnection from the grid
Wide range of input voltage and operation environment
Wide DC input range from 250V up to 850V
Wide operating temperature range -20 C ~ 60 C
IP65 harshest industrial protection for indoors and outdoors
RS232/RS485/WiFi interfaces
Easy-to-read LCD display with all operational status and monitored data
10098969492908886848280
580VDC
0 10 20 30 40 50 60 70 80 90
+
-
+
-
L1
N
PE+-
L2L3
IGBTTHREE-LEVEL
INVERTERCIRCUIT
Relay
DC SwitchDC
EMCFilter
DCEMC
Filter
DCEMC
Filter
MPPT1BoostCircuit
MPPT2BoostCircuit
MPPT3BoostCircuit
ACREACTOR
DC IN
PUT 1
DC IN
PUT 2
DC IN
PUT 3
Gird
ACEMC
FILTER
Communication interface RS485,Wifi (optional) Intelligent monitoring software and LCD display
PROTECTION CIRCUIT
19
ON-GRID
20
ON-GRID
GRID-TIED SNV-GT-TMSolar Inverter
TECHNICAL SPECIFICATION
SNV-GT-1002TM SNV-GT-1252TM SNV-GT-1502TM SNV-GT-1702TM SNV-GT-2002TM
MAX. DC INPUT POWER 12 KW 14 KW 17 KW 19 KW 22 KW
MAX. DC INPUT VOLTAGE 900Vdc
MPPT TRACKING VOLTAGE RANGE
NUMBER OF MPPT TRACKING 3
MAX. INPUT CURRENT for each tracking 12A ×3 17A×3
RATED OUTPUT POWER
MAX. AC OUTPUT POWER
RATED OUTPUT VOLTAGE 400 Vac
OUTPUT VOLTAGE RANGE 400V±20% (adjustable)
AC OUTPUT TOPOLOGY 3Ph+N+PE, Transformer-less
GRID FREQUENCY RANGE 50/60Hz (±5Hz), (adjustable)
RATED OUTPUT CURRENT
MAX. OUTPUT CURRENT
MAX. EFFICIENCY > 98.0% > 98.0% > 98.1% > 98.1% > 98.2%
> 97.5% > 97.5% > 97.6%
99.9%
<2 W
> 97.6% > 97.7%EURO EFFICIENCY
MPPT EFFICIENCY
STANDBY (NIGHT TIME) LOSSES
COOLING Forced air cooling
DC SWITCH Optional
COMMUNICATION INTERFACE RS485 standard, external WiFi or Ethernet (optional)
-20°C ~ 60°C
0 ~ 95% (non-condensing)
2000m
<40dB (1 meter from surface)
IP65
506 X 670 X 210 522 X 690 X 210
44 51
OPERATING TEMPERATURE
HUMIDITY RANGE
ALTITUDE
NOISE LEVEL
PROTECTION RATING
SAFETY IEC/EN62109-1,IEC/EN62109-2,VDE0126-1-1, VDE AR N4105,G83/59/EEG2012,
AS3100/4777,CEI 0-21,etc
EMC EN61000-6-2, EN61000-6-3, EN61000-3-11, EN61000-3-12, etc
INPUTMODEL
OUTPUT
SYSTEM FEATURES
ENVIRONMENTAL
PHYSICAL
STANDARDSSHIPPING WEIGHT (KG)
DIMENSION W x H x D ( mm )
THDi
Specifications subject to change without prior notice
250 ~ 850Vdc ( Rated voltage 580Vdc )
10 KW 12.5KW 15 KW 17 KW 20 KW
10.5 KW 13 KW 15.5 KW 17.5 KW 20.5 KW
15.2 A 18.1 A 21.7 A 24.6 A 29 A
17 A 20 A 24 A
<3%
27 A 30 A
0.9 leading ~ 0.9 laggingPOWER FACTOR ( COS Φ )
21
ON-GRID
MODEL A
B
BA
C
D
E
DIMENSION
SNV-GT-1002TM SNV-GT-1252TM SNV-GT-1502TM SNV-GT-1702TM
210
670 580 690
595
550
506 522
DIMENSION SNV-GT-TMSolar Inverter
SNV-GT-2002TM
210 210 210 210
690 690
506 522 522
276 276 276 276 276
550 596 596 596
595 595 595 595
OFF-GRID PV INVERTER
22
ICA Solar GFW series products are on the basis of green energy use and equipment electricity need for remote area,
combing the electricity characteristics of household appliances, communication station equipment and
computer peripheral equipment. They have the fuction of enery conservation and environment protection.
They adopt MCU control techniqute, having various kinds of function such as multi-setting mode, MPPT
control, voltage stabilization on line, short-circuit protection, inverter frequency adaptive, output overload,
batter charging management, monitoring etc. ICA Solar GFW series products are the ideal power supply delivered with
excellent performance, high stability, high reliability and practical applicability.
º MULTI-SETTING
- PV priority mode or AC priority mode
- Choose the charging current based on the configured capacity of the battery
º HIGH RELIABILITY: DOUBLE MCU DIGITAL CONTROL
- Independent MPPT (Maximum Power Point Tracking) control microprocessor system
- Independent inverter microprocessor control system
º ISOLATED AND PURE SINE WAVE TECHNOLOGY
º LCD+LED DISPLAY
º WIDE INPUT RANGE
º HIGH-SPEED SYNCHRONOUS CONVERSION
º FRIENDLY ALARM SYSTEM
º ONLINE PROTECTION FUNCTION
º FREQUENCY AUTO ADAPTIVE
º INTELLIGENT NO-LOAD AUTO SHUTDOWN TECHNOLOGY (OPTIONAL)
º INTELLIGENT MONITORING (RS232, USB, OR SNMP CARD, OPTIONAL)
SNV-GFW Series
OFF-GRID
SNV-GFW SeriesWallmount
TECHNICAL SPECIFICATION
POWER
BATTERY VOLTAGE
WORKING MODE
MODEL GFW112 GFW412 GFW512GFW1048
GFW1548
100 W
12Vdc
PV/AC Priority
400W
12Vdc
PV/AC Priority
500W
12Vdc
PV/AC Priority
1500 W
48Vdc
PV/AC Priority
2000 W
48Vdc
PV/AC Priority
INPUT VOLTAGE RANGE
SUGGESTED VOLTAGE RANGE
PV CURRENT
MAX. CHARGE CURRENT
CONVERSION EFFICIENCY
12Vdc
25Vdc
15Vdc
17.8Vdc
≤ 20A
5A / 10A / 20 A
12Vdc~25Vdc (12V)
24Vdc~45Vdc (24V)
15Vdc~17.8Vdc (12V)
30Vdc~36Vdc (24V)
≤ 40A ≤ 60A / ≤ 40A
10A / 20A / 30A / 40A
98%
10A / 20A / 30A / 60A
≤ 60A ≤ 80A
24Vdc~45Vdc
30Vdc~36Vdc
48Vdc~90Vdc
60Vdc~71Vdc
PV
PANEL INDICATOR LCD + LED
DISPLAY
INPUT VOLTAGE RANGE
INPUT FREQUENCY RANGE
OUTPUT VOLTAGE PRECISION
INPUT PF (AC/DC)
CHARGE CURRENT
EFFICIENY (MAINS MODE)
OVERLOAD
SHORT CIRCUIT PROTECTION
100 / 110 / 120 / 220 / 230 / 240 VAC ± 25% ( CUSTOMIZED )
45 - 65 Hz ( automatically transfer to inverter power when overfrequency )
100 / 110 / 120 / 220 / 230 / 240 VAC ± 10%
≥ 98%
12A Max.
≥ 96%
110% 255s transfer to bypass model; 120% 60s transfer to bypass model; 150% 10s transfer to bypass model
Input Fuse
AC MODE
INVERTER OUTPUT VOLTAGE
OUTPUT FREQUENCY
WAVE FORM DISTORTION
PV-AC TRANFER TIME
MAX. EFFICIENCY
INVERTER OVERLOAD
NO-LOAD OFF
SHORT CIRCUIT PROTECTION
100 / 110 / 120 / 220 / 230 / 240 VAC ± 5%
50 / 60 Hz ± 1% frequency load more
Linear Load ≤ 5%
5 ms typical value; max 8 ms
≥ 84.5 %
110% 255s transfer to bypass model; 120% 60s transfer to bypass model; 150% 1s transfer to bypass model
Load <5% System automatically shut down at 1 Min. Transfer to bypass power supply
System automatically shut down
INVERTER MODE
MAINS ABNORMAL
LOW BATT
OVERLOAD
COMM INTERFACE ( OPTIONAL )
1/4s ; Automatically sound elimination after 40s
5/1 s
1/1 s
RS232 / USB / SNMP
ALARM
SURGE PROTECTION
EMC
IP CLASS
AMBIENT TEMPERATURE
AMBIENT HUMIDITY
NOISE
Optional
EN62040 - 2:2006:EN61000-3-2:2006:EN61000-3-3:2008
IP21
0 C - $0 C
10% - 90%
< 50 dB
OTHERS
GFW2048GFW1024
1000 W
24Vdc / 48Vdc
PV/AC Priority
2400 W
48Vdc
PV/AC Priority
GFW2448
23
OFF-GRID
24
OFF-GRID
º HIGH RELIABILITY:
- High-speed micro-controller DSP digital control technology to achieve real-time control, parameter setting, data
detection, self-test function to ensure high reliable operation of the system.
- With high speed switching characteristic, high voltage, highcurrent, low internal resistance, low dissipation IGBT,
MOSFET power components based, to ensure system security and reliability.
º N+1 MODULARISED MPPT TRACKING SYSTEM:
- Multipath MPPT control system access, independent input, operation. More suitable for roof project, to improve
power generation efficiency of the panels.
º PV PROACTIVE POWER SUPPLY FUCNTION:
- After detects PV energy, system will enter MPPT status automatically and it will also adjust the power distribution,
priority in the use of PV energy.
º INTELLIGENT BATTERY MANAGEMENT SYSTEM:
- In this system, AC rectifier, MPPT controller controlled by intelligent data exchange and communication system,
user can set battery capacity by themselves; battery configuration can be set by the operation interface, system will
automatically adjust the charging current, charging voltage, and charging mode.
- In special cases, International Technical Engineer can adjust the charging rate and battery number according to
the system configuration.
º PLENTEOUS COMMUNICATION INTERFACE:
- RS485, RS232 (standard) and SNMP (optional)
- Input dry contact to switch on/off inverter, clear abnormal, EPO remotely. Output dry contacts singles for remote
alarm.
º PLENTEOUS COMMUNICATION INTERFACE:
- system with intelligent peak load and shifting function, the user can set the appropriate time period electricity
according to the local electricity policy, to achieve load shifting features directly in order to bring economic value.
SOLAR INVERTER
OFF-GRID 3KVA-8KVA
GFK11 Series Products use high speed DSP Control Unit,
Advanced high speed IGBT, MOSFET components, with
Pulse Width Modulation (SVPWM) technique disturbance
type MPPT Control, and double conversion system
configuration. Under high-speed DSP system control, the
system can quickly track panels to do high-power, load
change and efficient multi-level control system, even if the
mains input voltage and frequency suddenly changes,
over/under voltage, or power disturbances. It also can
provide the load with regulated voltage and frequency
power. System has a reliable, environmentally friendly, high
intelligence and other characteristics.
25
OFF GRID 3KVA-8KVASolar Inverter
TECHNICAL SPECIFICATION
RATED POWER (KVA)
RATED POWER (KW)
OUTPUT POWER FACTOR
BATTERY VOLTAGE
BATTERY QUANTITY
WORKING MODE
MODEL SNV-GF3K08
3 KVA3 KW
96 VDC8 UNITS, 12 V
96 VDC - 200VDC10 - 60 A
120 - 142 VDC< 60 A
98%
192 VDC - 400 VDC
192 VDC - 400 VDC
192 VDC16 UNITS, 12 V
SNV-GF4K08
4 KVA4 KW
SNV-GF3K16
3 KVA3 KW
10 - 40 A
< 40A
1
PV priority / AC priority optional
SNV-GF5K16
5 KVA5 KW
SNV-GF6K16
6 KVA6 KW
SNV-GF8K16
8 KVA8 KW
MPPT VOLTAGE RANGE
MAX. CHARGING CURRENT (A)
PV PANELS CONF. (SUGGESTIONS) (VMP)
PV PANELS CONF. (SUGGESTIONS) (IMP)
CONVERSION EFFICIENCY
PV INPUT
7685
8089
6069
6776
6978
10 - 60 A
< 60A
PANEL INDICATOR LCD + LED
DISPLAY
INPUT VOLTAGE RANGE
INPUT FREQUENCY RANGE
OUTPUT VOLTAGE PRECISION
INPUT PF (AC/DC)
MAX. EFFICIENY
OVERLOAD
MAX. CHARGING CURRENT
SHORT CIRCUIT PROTECTION
165 VAC - 275 VAC
40 - 70 HZ ( Auto Transfer to Battery Mode, if out of range )
220 VAC ± 5%
> 0.888% Inverter On
110 Transfer to bypass in 255s ; 120% transfer to bypass in 60s ; 150% transfer to bypass in 10s8A / 12 A
ELECTRONIC LIMITED CURRENT OUTPUT OR TURN BYPASS; AIRBREAKER PROTECTION
AC MODE
INVERTER OUTPUT VOLTAGE
OUTPUT FREQUENCY
OUTPUT POWER FACTOR
DISTORTION
PV-AC TRANSFER TIME
MAX. EFFICIENCY
OVERLOAD
ECO MODE (OPTIONAL)
SHORT CIRCUIT PROTECTION
220 VAC±5%50 / 60 Hz ± 1% frequency self adjusted
1< 5% linear load
0 ms
> 92%
110 Trnsfer to bypass in 255s ; 120% transfer to bypass in 60s ; 150% transfer to bypass in 10sLoad <5% System automatically shut down at 1 Min. Transfer to bypass power supply
ELECTRONIC LIMITED CURRENT OUTPUT OR TURN BYPASS OR SHUTDOWN
INVERTER MODE
AC FAIL
BATTERY LOW VOLTAGE
OVERLOAD
1/4s ; Automatically sound elimination after 40s
5/1 s1/1 s
ALARM
OUTPUT CONNECTION
SURGE PROTECTION
EMC
IP CLASS
AMBIENT TEMPERATURE
AMBIENT HUMIDITY
NOISE
WORKING ALTITUDE
DIMENSION ( W x D x H ) mm
PACKING DIMENSIONS ( W x D x H ) mm
WEIGHT
PACKING WEIGHT
Terminal BlocksOptional
Accord with EN62040-2 ; 2006 ; en61000-3-2 ; 2006 ; en61000-3-3 ; 2008ip 20
0 c - 40 c10% - 90% ( non condensing )
< 50 dB2000m ( Every 100 increase, derate 1% )
560 x 265 x 725
662 x 360 x 905
OTHERS
COMM. INTERFACE
DRY CONTACT
RS232 / USB / RS485 / SNMP
PV FAILURE, Battery Low Voltage, Overload, Bypass, Inverter Failure, Remote Start Generator Dry Contact signal
COMMUNICATION
OFF-GRID
26
º HIGH RELIABILITY:
- High-speed micro-controller DSP digital control technology to achieve real-time control, parameter setting, data
detection, self-test function to ensure high reliable operation of the system.
- With high speed switching characteristic, high voltage, highcurrent, low internal resistance, low dissipation IGBT,
MOSFET power components based, to ensure system security and reliability.
º N+1 MODULARISED MPPT TRACKING SYSTEM:
- Multipath MPPT control system access, independent input, operation. More suitable for roof project, to improve
power generation efficiency of the panels.
º PV PROACTIVE POWER SUPPLY FUCNTION:
- After detects PV energy, system will enter MPPT status automatically and it will also adjust the power distribution,
priority in the use of PV energy.
º INTELLIGENT BATTERY MANAGEMENT SYSTEM:
- In this system, AC rectifier, MPPT controller controlled by intelligent data exchange and communication system,
user can set battery capacity by themselves; battery configuration can be set by the operation interface, system will
automatically adjust the charging current, charging voltage, and charging mode.
- In special cases, International Technical Engineer can adjust the charging rate and battery number according to
the system configuration.
º PLENTEOUS COMMUNICATION INTERFACE:
- RS485, RS232 (standard) and SNMP (optional)
- Input dry contact to switch on/off inverter, clear abnormal, EPO remotely. Output dry contacts singles for remote
alarm.
º PLENTEOUS COMMUNICATION INTERFACE:
- system with intelligent peak load and shifting function, the user can set the appropriate time period electricity
according to the local electricity policy, to achieve load shifting features directly in order to bring economic value.
SOLAR INVERTER
OFF-GRID 10KVA-120KVA
GFK33 Series Products use high speed DSP Control Unit,
Advanced high speed IGBT, MOSFET components, with
Pulse Width Modulation (SVPWM) technique disturbance
type MPPT Control, and double conversion system
configuration. Under high-speed DSP system control, the
system can quickly track panels to do high-power, load
change and efficient multi-level control system, even if the
mains input voltage and frequency suddenly changes,
over/under voltage, or power disturbances. It also can
provide the load with regulated voltage and frequency
power. System has a reliable, environmentally friendly, high
intelligence and other characteristics.
OFF-GRID
27
OFF-GRID
OFF-GRID 10KVA-120KVA Solar Inverter
TECHNICAL SPECIFICATION
RATED POWER (KVA)
RATED POWER (KW)
RATED CURRENT (KA)
OUTPUT POWER FACTOR
RATED INPUT VOLTAGE
RATED OUTPUT VOLTAGE
REBATTERY VOLTAGE
BATTERY QUANTITY
WORKING MODE
MODELSNV-GF10K33
10 KVA9 KW15A
SNV-GF20K33
20 KVA18 KW
30A
SNV-GF30K33
30 KVA27 KW
45A
SNV-GF40K33
40 KVA36 KW
60A
SNV-GF50K33
50 KVA45 KW
76A
0.9380V ± 20%380V ± 1%
360 Vdc
30 Units, 12 V
PV, AC replenish
SNV-GF60K33
60 KVA54 KW
91A
SNV-GF80K33
80KVA72KW133Ah
SNV-GF100K33
100KVA90KW151A
SNV-GF120K33
120KVA108KW182A
MAX VOLTAGE
BEST WORKING VOLTAGE
FLOAT CHARGING VOLTAGE
MAX EFFICIENCY
EQUALIZE CHARGE VOLTAGE
MAX CURRENT
PV INPUT WAYS
MPPT MODULAR
40A
1+1 RESERVED
60A
1+1 RESERVED
120A
2+1 RESERVED
180A
3+1 RESERVED
240A
4+4 RESERVED
300A
5+3 RESERVED
360A
6+2 RESERVED
1+1 RESERVED 1+1 RESERVED 2+1 RESERVED 3+1 RESERVED 4+1 RESERVED 5+3 RESERVED 6+2 RESERVED
750 VDC
444-550 VDC
414V ± 1%
> 98%
428V ± 1%
PV INPUT
AC RECTIFIERINPUT VOLTAGE RANGE
RATED FREQUENCY
FREQUENCY RANGE
SOFT START
POWER FACTOR
FLOAT CHARGE VOLTAGE
MAX. VOLTAGE
MAX CHARGE CURRENT (A) 12 25 38 50 62 75 80 100 120
Three Phases 380V ± 20% (-10% to +20% to charge battery )
50 / 60 Hz (Settable)
50 / 60 Hz ± 5 Hz
0 - 100% 10s
0.8
410 V ± 1%
415 V ± 1%
INVERTER VOLTAGE
PHASE VOLTAGE SETTING
OUTPUT VOLTAGE ACCURACY
VOLTAGE TRANSIENTS RANGE
TRANSIENT RECOVERY TIME
RATED FREQUENCY
FREQUENCY TRACKING RANGE
CREST FACTOR
WAVE
THD
VOLTAGE UNBALANCE DEGREE
OVERLOAD
SHORT CIRCUIT
MAX EFFICIENCY (%) > 90% > 91% > 92% > 92% > 93% > 93%
Three Phases Four Lines + Ground 380 Vac
220 - 230 - 240 Vac (settable )± 1%
± 5%
20 ms
50 Hz/60 Hz ± 1%
50 Hz/60 Hz ± 3Hz
3 : 1Pure Sine Wave
< 3% Linear Load± 3% ( 100% Unbalanced Load )
> 105% - 110%: Transfer to bypass in 1 hour, Recover when Load < 100%> 110% - 125%: Transfer to bypass in 10 mins, Recover when Load < 100%
> 125% - 150%: Transfer to bypass in 1 min, Recover when Load < 100%> 150%: Transfer to bypass in 10 seconds, Recover when user confirmed> 150%: Transfer to bypass in 10 seconds, Recover when user confirmed
System current limit, shut down immediately, require boot by user
BY PASS
BATTERY MANAGEMENT
BATTERY MANAGEMENT
COMMUNICATION INTERFACE
RATED VOLTAGE (V)
VOLTAGE RANGE
RATED FREQUENCY (HZ)
MAX CURRENT (A)
Three Phases Four Lines + Ground 380 Vac
±20%
50 HZ / 60 HZ ± 5HZ
END OF DISCHARGE
CHARGING CURRENT SETTING
BATTERY INTELLIGENT MANAGEMENT
STAGGERING DEPTH
315 Vdc0.05C-0.3C (Factory Default :0.15C)
Equalizing charging and float charging automatically transfer, automatic temp compenstion for battery
18.5V-2.1V/Cell (settable)
REMOTE CONTROL INPUT
PC MONITORING INTERFACE
DRY CONTACT
Inverter on, Inverter off, Abnormal Clear, Emergency Power Off (EPO)R5232, R5484, SNMP (Optional)
Bypass Input Abnormal, Rectifier Input Abnormal, system Fault, System Warning, Low Batt, Overload, Fans Vault
ENVIRONMENTOPERATION TEMP.
MAX. RELATIVE HUMIDITY
MAX. WORKING ATTITUDE
0 - 42 C
90% (Non Condensing)
1000m (100m higher, 1% derated ; Max 4000m )
Inverter / Bypass transfer time : 0 ms
> 93% > 93% > 93%
19 38 57 76 95 114 122 152 182
INVERTER
28
is charge controller that is used in the solar application and also called solar battery charger. Its function
is to regulate the voltage and current from the solar arrays to the battery in order to prevent
overcharging and also over discharging. There are many technologies have been included into the
design of solar charge controller. For example, MPPT charge controller included maximum power point
tracking algorithm to optimize the production of PV cell or module.
SOLAR CHARGERCONTROLLER
SHINE SERIES / SCR PWM 10A
SCR PWN 10A
Dimensions and module:
OFF-GRID
29
Shine series solar controller is specifically designed to meet needs of solar systems.
It provides the best cost-effective.
It comes with a number of outstanding features, such as:
- Low cost and high reliabilty design
- 12/24V automatic recognition
- Clear readable display of charge/discharge and error description
- Temperature compensation
- Four stage charge way: fast, boost, equalization, float
- Full automatic electronic protect function
TECHNICAL SPECIFICATION
SYSTEM VOLTAGE
MAX SOLAR CURRENT OR LOAD CURRENT
FAST VOLTAGE
BOOST VOLTAGE
EQUALIZATION VOLTAGE
FLOAT VOLTAGE
LOAD DISCONNECT VOLTAGE
LOAD RECONNECT VOLTAGE
BATTERY TYPE
TEMPERATURE COMPENSATION
MAX SOLAR VOLTAGE
MAX BATTERY VOLTAGE
OVER VOLTAGE PROTECTION
DIMENSION/WEIGHT
WIRE SIZE
OWN COMPSUMPTION
AMBIENT TEMPERATURE
DEGREE OF PROTECTION
SHINE 06 SHINE 10
12 / 24V AUTOMATIC RECOGNITION
6A | 10A
14.0V/28.0V ( 25°C )
14.5V/29.0V ( 25°C )
14.8V/29.6V ( 25°C ) Liquid
13.7V/27.4V ( 25°C )
11.0V/22.0V
12.5V/25.0V
Liquid, Gel
-4.17 mW/K per cell (boost, equalization). -3.33mV/K per cell (float)
55V
40V
15.5V/31.0V
150x72x35mm / 130g
06A; 1.5mm2 ; 10A ; 2.5 mm2
4mA
-40°C ~ +60°C
IP22
SHINE SERIES 6A / 10A12 / 24V System Solar Charger Controller
OFF-GRID
Solar Charge Controller berfungsi untuk mengatur energi yang masuk (charge) dan keluar (discharge).
Laju pengisian baterai dari input Photovoltaic Array dapat dikontrol sehingga tidak akan terjadi over
charge yang dapat mengakibatkan kerusakan pada baterai. Demikian juga sebaliknya, apabila energi
yang tersisa pada baterai telah mencapai batas minimum, maka secara otomatis SCR akan memutus
penyaluran energi ke beban (pengguna). Untuk pemakaian di Solar Home System (SHS), PJU tenaga
surya dan off-grid.
SOLAR CHARGERCONTROLLER
SOLAR CHARGER CONTROLLER PWM 10A / 20A
SCR PWN 10A SCR PWN 20A
SOLAR CHARGER CONTROLLER 10A
Merek : Lumiax
Fitur : light and programmable
timer control
Voltage : 12V/24V (auto)
Rated current : 10A
Max solar voltage : 55V
Dimensi : 81 x 102 x 37mm
Berat : 150g
Enclosure : IP22
SOLAR CHARGER CONTROLLER 20A
Merek : Lumiax
Fitur : light and programmable
timer control
Voltage : 12V/24V (auto)
Rated current : 20A
Max solar voltage : 55V
Dimensi : 81 x 102 x 37mm
Berat : 150g
Enclosure : IP22
30
OFF-GRID
12 / 24V, Night-light function - Solar Charger Controller
LAT-NL Series intelligent solar controller is especially or solar photovoltaic
power generation system and solar street light system.
It comes with a number of outstanding features, such as:
- Programmable Night-Light function
- 12/24V automatic recognition
- Clear readable display of charge/discharge and error description
- Temperature compensation
- Low voltage disconnected reulated by state of charge
- Max 16mm2 binding clamp
- Four stages PWM charge way; fast, boost, equal, float
- Full automatic electronic protect function
TECHNICAL SPECIFICATION
SYSTEM VOLTAGE
MAX SOLAR CURRENT OR LOAD CURRENT
FAST VOLTAGE
BOOST VOLTAGE
EQUALIZATION VOLTAGE
FLOAT VOLTAGE
LOAD DISCONNECT VOLTAGE
LOAD RECONNECT VOLTAGE
BATTERY TYPE
TEMPERATURE COMPENSATION
MAX SOLAR VOLTAGE
MAX BATTERY VOLTAGE
OVER VOLTAGE PROTECTION
DIMENSION/WEIGHT
WIRE SIZE
OWN COMPSUMPTION
AMBIENT TEMPERATURE
DEGREE OF PROTECTION
WORKING TIME DURING NIGHT
LAT10-NL LAT20-NL
12 / 24V AUTOMATIC RECOGNITION
10A | 20A
14.0V/28.0V ( 25°C )
14.5V/29.0V ( 25°C )
14.8V/29.6V ( 25°C ) Liquid
13.7V/27.4V ( 25°C )
11.2~11.8V/22.4~23.6V
12.5V/25.0V
Liquid, Gel
-4.17 mW/K per cell (boost, equalization). -3.33mV/K per cell (float)
55V
40V
15.5V/31.0V
81x102x37mm / 150g
16 mm2 (AWG #6)
4mA
-40°C ~ +60°C
IP22
DUSK TO DAWN MODE. 4,6,8 HOURS ( PROGRAMMABLE)
LAT-NL SERIES 10A / 20A
31
OFF-GRID
32
Solar Charge Controller berfungsi untuk mengatur energi yang masuk (charge) dan keluar (discharge).
Laju pengisian baterai dari input Photovoltaic Array dapat dikontrol sehingga tidak akan terjadi over
charge yang dapat mengakibatkan kerusakan pada baterai. Demikian juga sebaliknya, apabila energi
yang tersisa pada baterai telah mencapai batas minimum, maka secara otomatis SCR akan memutus
penyaluran energi ke beban (pengguna). Untuk pemakaian di Solar Home System (SHS), PJU tenaga
surya, off-grid
SOLAR CHARGERCONTROLLER
LS1024R / LS2024R
LS 1024 R LS 2024 R
LS 1024 R - SOLAR CHARGER CONTROLLER
Merek : EPSolar
Fitur : light and programmable
timer control
Voltage : 12V/24V (auto)
Rated current : 10A
Max battery voltage : 32V
Dimensi : 140 x 65 x 34mm
Berat : 150g
Enclosure : IP30
LS 2024 R - SOLAR CHARGER CONTROLLER
Merek : EPsolar
Fitur : light and programmable
timer control
Voltage : 12V/24V (auto)
Rated current : 20A
Max battery voltage : 32V
Dimensi : 144 x 75 x 45mm
Berat : 250g
Enclosure : IP30
OFF-GRID
33
Landstar series solar charger controller that asopts the most advanced digital techique and
operates fully automatically. The Pulse Width Modulation (PWM) battery charging can greatly
increase the lifetime battery.
It comes with a number of outstanding features, such as:
- 12/24V auto work
- High efficient series PWM charging
- Use MOSFET as electronic switch
- Gel, Sealed and flooded battery type option
TECHNICAL SPECIFICATION
NOMINAL SYSTEM VOLTAGE
RATED BATTERY CURRENT
RATED LOAD CURRENT
MAX. BATTERY VOLTAGE
CHARGE CIRCUIT VOLTAGE DROP
DISCHARGE CIRCUIT VOLTAGE DROP
SELF-CONSUMPTION
LS 1024ELECTRICAL PARAMETER LS 2024
12 / 24V AUTOWORK
10A | 20A
10A | 20A
32 V
≤ 0.26 V
≤ 0.15 V
≤ 6 mA
EQUALIZE CHARGING VOLTAGE
BOOST CHARGING VOLTAGE
FLOAT CHARGING VOLTAGE
LOW VOLTAGE RECONNECT VOLTAGE
LOW VOLTAGE DISCONNECT VOLTAGE
EQUALIZE DURATION
BOOST DURATION
GEL SEALED
LS1024 LS2024
FLOODEDBATTERY VOLTAGE PARAMETERS
--
14.2V ;X2/24V
13.8V ;X2/24V
12.6V ;X2/24V
11.1V ;X2/24V
--
2 HOURS
14.6V ;X2/24V
14.4V ;X2/24V
13.8V ;X2/24V
12.6V ;X2/24V
11.1V ;X2/24V
2 HOURS
2 HOURS
14.8V ;X2/24V
14.6V ;X2/24V
13.8V ;X2/24V
12.6V ;X2/24V
11.1V ;X2/24V
2 HOURS
2 HOURS
WORKING TEMPERATURE
STORAGE TEMPERATURE
HUMIDITY
ENCLOSURE
ENVIRONMENTAL PARAMETERS
-35˚C ~ +55˚C
-35˚C ~ +80˚C
10% - 90& NC
IP30
OVERALL DIMENSIONS
MOUNTING DIMENSIONS
TERMINAL
NET. WEIGHT
MECH. PARMETERS
140X65X34mm
130X45mm
4mm2
0.15 kg
144X75X34mm
135X45mm
10mm2
0.25 kg
LS1024R LS2024R PWM Solar Charger Controller
- Temperature compensation
- Electronic protection: over charging, over discharging, overload
short circui and overheating
- reverse protection: any combination of solar module and battery
OFF-GRID
Solar Charge Controller berfungsi untuk mengatur energi yang masuk (charge) dan keluar (discharge).
Laju pengisian baterai dari input Photovoltaic Array dapat dikontrol sehingga tidak akan terjadi over
charge yang dapat mengakibatkan kerusakan pada baterai. Demikian juga sebaliknya, apabila energi
yang tersisa pada baterai telah mencapai batas minimum, maka secara otomatis SCR akan memutus
penyaluran energi ke beban (pengguna). Untuk pemakaian di Solar Home System (SHS), PJU tenaga
surya, off-grid, PLTS terpusat/komunal, PV hybrid system.
SOLAR CHARGERCONTROLLER
TRACER 1215BN / 2215 BN / 3215 BN
1215 BN 2215 BN 3215 BN
Merek : TRACER
Fitur : light &
programmable
timer control
Voltage : 12V/24V (auto)
Rated current : 10A
Max PV circuit : 150V
Max PV input : 130W (12V),
260W (24V)
Dimensi : 196 x 118 x 36mm
Berat : 0.9 kg
Enclosure : IP30
Merek : TRACER
Fitur : light &
programmable
timer control
Voltage : 12V/24V (auto)
Rated current : 20A
Max PV circuit : 150V
Max PV input : 260W (12V),
520W (24V)
Dimensi : 217 x 143 x 56mm
Berat : 1.5 kg
Enclosure : IP30
Merek : TRACER
Fitur : light &
programmable
timer control
Voltage : 12V/24V (auto)
Rated current : 30A
Max PV circuit : 150V
Max PV input : 390W (12V),
780W (24V)
Dimensi : 281 x 160 x 60mm
Berat : 2.3 kg
Enclosure : IP30
34
OFF-GRID
New Tracer Series is EPSolar’s second generation of MPPT controller. Compares with classic Tracer Series, it has extensive
communication ability. And the die-cast alumunium design ensures excellent heat dispersion. Compared to conventional
PWM controller, MPPT Technology increases the charge efficiency up to 30% and potentially decreased the power of solar
array needed.
It comes with a number of outstanding features, such as:
- Innovative MPPT technology
- Peak conversion efficiency of 98%
- High tracking efficiency up to 99%
- Several seconds tracking speed
TECHNICAL SPECIFICATION
NOMINAL SYSTEM VOLTAGE
RATED BATTERY CURRENT
RATED LOAD CURRENT
MAX. PV OPEN CIRCUIT VOLTAGE
MAX. BATTERY VOLTAGE
MAX. PV INPUT POWER
1215BN 2215BN 3215BNELECTRICAL PARAMETER 12 / 24V AUTOWORK
10A 20A 30A
10A 20A 30A
150 V
32 V
130W (12V) 250W (12V) 390W (12V)
260W (24V) 520W (24V) 780W (24V)
EQUALIZE CHARGING VOLTAGE
BOOST CHARGING VOLTAGE
FLOAT CHARGING VOLTAGE
LOW VOLTAGE RECONNECT VOLTAGE
LOW VOLTAGE DISCONNECT VOLTAGE
SELF-CONSUMPTION
GROUNDING
TEMP. COMPENSATION
COMMUNICATION PORT
GEL SEALED
1215BN 2215BN
FLOODED USERBATTERY VOLTAGE PARAMETERS
14,2V
14.2V
13.8V
12.6V
11.1V
≤ 5.0 mA (12V)
Common Negative
- 3mV / ˚ / 2V
RS485 / RJ45 interface
14.6V
14.4V
13.8V
12.6V
11.1V
14.8V
14.6V
13.8V
12.6V
11.1V
9~17V
9~17V
9~17V
9~17V
9~17V
WORKING TEMPERATURE
STORAGE TEMPERATURE
HUMIDITY
ENVIRONMENTAL PARAMETERS
-35˚C ~ +55˚C
-35˚C ~ +80˚C
≤95% N.C.
DIMENSIONS
TERMINAL
NET. WEIGHT
ENCLOSURE
MECHANICAL
196X118X36mm
4mm2
0.9kg
IP30
217X143X56mm
10mm2
1.5kg
IP30
3215BN
281x160x60mm
16mm2
2.3kg
IP30
1215 BN 2215 BN 3215 BNMPPT Solar Charger Controller
- Die-cast alumunium design and nature cooling
- Temperature compensation
35
OFF-GRID
Solar Charge Controller berfungsi untuk mengatur energi yang masuk (charge) dan keluar (discharge).
Laju pengisian baterai dari input Photovoltaic Array dapat dikontrol sehingga tidak akan terjadi over
charge yang dapat mengakibatkan kerusakan pada baterai. Demikian juga sebaliknya, apabila energi
yang tersisa pada baterai telah mencapai batas minimum, maka secara otomatis SCR akan memutus
penyaluran energi ke beban (pengguna). Untuk pemakaian di Solar Home System (SHS), PJU tenaga
surya, off-grid, PLTS terpusat/komunal, PV hybrid system
SOLAR CHARGERCONTROLLER
ITRACER IT3415 / 1T4415 / 1T6415
IT2415 IT4415 IT6415
MEREK
FITUR
VOLTAGE
RATED CURRENT
MAX PV OPEN CIRCUIT VOLTAGE
MAX PV INPUT POWER
TRACKING EFFICIENCY
PEAK CONVERSION EFFICIENCY
DIMENSI
BERAT
ENCLOSURE
IT2415
30 A
150 V
400W (12V) 800W (24V)
1200W (36V) 1600W (48V)
99%
98%
358 x 219 x 102mm
3.7 kg
IP20
IT4415
ITRACER
light and programmable timer control
12V/24V/36V/48V (auto)
45 A
150 V
600W (12V) 1200W (24V)
1800W (36V) 2400W (48V)
99%
98%
382 x 231 x 107mm
4.6 kg
IP20
IT6415
60 A
150 V
800W (12V) 1600W (24V)
2400W (36V) 3200W (48V)
99%
98%
440 x 231 x 110mm
5.9 kg
IP20
36
OFF-GRID
37
iTracer is an industrial grade product with advanced Maximum Power Point Tracking (MPPT) algorithm. It can deliver the
maximum available power for charging batteries and charge a lower nominal voltage battery from a higher nominal
voltage array . And can be applied in off-grid PV systems up to 3KW. The die-cast alumunium design ensures excellent
heat dispersion.
It comes with a number of outstanding features, such as:
- Advanced MPPT Algorithm with the maximum tracking effiency of 99%
- Multi phase synchronous rectification technology realizing peak conversion efficiency 98%
- Dual-core (ARM CPU+DSP) control arhitecture improves the system response speed and optimizes the performances
of the system.
TECHNICAL SPECIFICATION
NOMINAL SYSTEM VOLTAGE
RATED BATTERY CURRENT
RATED LOAD CURRENT
MAX. PV OPEN CIRCUIT VOLTAGE
VOLTAGE RANGE
MAX. PV INPUT POWER
IT3415ND IT4415ND IT6415NDELECTRICAL PARAMETER 12 / 24V AUTOWORK
30A 45A 60A
30A 45A 60A
150 V
8~72 V
400W (12V) 600W (12V) 800W (12V)
800W (24V) 1200W (24V) 1600W (24V)
1200W (36V) 1800W (36V) 2400W (36V)
1600W (48V) 2400W (48V) 3200W (48V)
IT3415 IT4415
EQUALIZE CHARGING VOLTAGE
BOOST CHARGING VOLTAGE
FLOAT CHARGING VOLTAGE
LOW VOLTAGE RECONNECT VOLTAGE
LOW VOLTAGE DISCONNECT VOLTAGE
SELF-CONSUMPTION
GROUNDING
TRACKING EFFICIENCY
PEAK CONVERSION EFFICIENCY
GEL SEALED FLOODED USERBATTERY VOLTAGE PARAMETERS
14.2V
14.2V
13.8V
12.6V
11.1V
1.4~2.2 W
Common Negative
99%
98%
14.6V
14.4V
13.8V
12.6V
11.1V
14.8V
14.6V
13.8V
12.6V
11.1V
9~17V
9~17V
9~17V
9~17V
9~17V
AMBIENT TEMP. RANGE
STORAGE TEMP. RANGE
HUMIDITY
ENCLOSURE
ENVIRONMENTAL PARAMETERS
-25˚C ~ +55˚C
-30˚C ~ +85˚C
95% N.C.
IP20
DIMENSIONS
MOUNTING
NET. WEIGHT
TERMINAL
MECHANICAL
358X219X102mm
339X195mm
3.7kg
25mm2
382X231X107mm
362X205mm
4.6kg
35mm2
IT6415
440x231x110mm
420X205mm
5.9kg
35mm2
IT3415 IT4415 IT6415MPPT Solar Charger Controller with Load Control
OFF-GRID
Tidak memerlukan listrik PLN dan genset,energi murni dihasilkan dari Sinar Matahari
Cahaya yang dipancarkan sangat terangdan tahan lama
Cocok untuk wilayah jauh dari jaringan listrik
Desain yang portabel, kokoh, dan ringan
Pemasangan mudah dan praktis
Lampu indikator untuk battery
USB port untuk pengisian battery HP (opsional)
Bebas perawatan
Ramah lingkungan dan aman sesuai ROHS
Layanan purna jual se-Indonesia
Perkemahan
Survei di lapangan
Untuk penerangan di desa
Pertambangan
Rumah tanpa listrik PLN
Daerah terpencil yang tidak terjangkau oleh PLN
APLIKASI
MODEL 1xLED 3W 2xLED 3W
SHS 122 57 Jam 28 Jam -
SHS 123 86 Jam 43 Jam 20 Jam
3xLED 3W +1x Cas HP
* Dengan asumsi battery terisi penuh
* Pengisian battery tergantung cuaca di masing-masing daerah
Basic Lighting Needs for Everyone
SHS122C
SHS123C
SHS-DC Unit
Solar Sel
Battery Bank
Solar Controller
Legend :
Bohlam DC
USB Output
SOLAR HOMESYSTEM
SHS-DC SERIES
38
OFF-GRID
Waktu ada sinar MatahariTanpa sinar Matahari
- SOLAR PANEL
39
OFF-GRID
SHS-DC SERIESBasic Lighting Needs for Everyone
SHS 122C SHS 123C
SYSTEM VOLTAGE
ENERGY RATING
SOLAR PANEL
RATED WATT (STC)
TYPE OF SOLAR PV
BATTERYCAPACITY
FLOAT VOLTAGE
BOOST VOLTAGE
LOAD DISCONNECT VOLTAGE
LOAD RECONNECT VOLTAGE
TEMP. COMPENSATION
OVER VOLTAGE PROTECTION
NO. OF DC OUTPUT CONNECTOR
RATED USB DC VOLTAGE
MAX. USB DC CURRENT
NO. OF USB PORT
TRANSFER TIME FROM PV TO BATT.
BACK UP TIME
WIRE SIZE / LENGTH
-0°C ~ +50°C
LED
ADDITIONAL ITEMS
ACCESSORIES
LED BULB WITH CABLES
ENVIRONMENT
DIMENSION (D X W X H)
INPUTMODEL
WIRE SIZE / LENGTH
MAX. DC OUTPUT CURRENT
PANEL DISPLAY
OPERATING TEMP
PHYSICAL CHARACTERISTICSHUMIDITY
STORAGE TEMP
RATED DC VOLTAGE
LOAD
- SHS UNIT
- SOLAR PANEL
WEIGHT (NETTO / BRUTTO)
- SHS UNIT
12 VDC
13.7 VDC at 25°C
Monocrystalline / Polycrystalline
11.0 VDC
12.5 VDC
Oms
Tergantung Pola Pemakaian
Stranded Wire AWG 22 / 4 m
1 set kabel Solar Panel
-3.33 mV/°C/Cell (Float Voltage)
15.5 VDC
12 VDC ±5%
Stranded Wire 1.5mm2 / 5 m
14.5 VDC at 25°C
Indicate status of PV, Batt, load and Fault
-20°C ~ +50°C
0 ~ 95% Non-considering
180 Watt-hour
2 ADC
2 set 3W DC LED with Load Cable
130 x 160 x 315mm
2 x 12V 7.5Ah SLA
50 Wp
2
-
-
-
23 x 645 x 545mm
6 kg / 6.5 kg
4.7 kg / 5.5 kg
270 Watt-hour
80 Wp
3 x 12V 7.5Ah SLA
3 ADC
3
5 VDC
1 ADC
1
3 set 3W DC LED with Load Cable
135 x 255 x 310mm28 x 540 x 1210mm
9 kg / 9.5 kg
8.3 kg / 9kg
Tidak memerlukan listrik PLN dan genset,energi murni dihasilkan dari Sinar Matahari
Cahaya yang dipancarkan sangat terangdan tahan lama
Cocok untuk wilayah jauh dari jaringan listrik
Desain yang portabel, kokoh, dan ringan
Pemasangan mudah dan praktis
Lampu indikator untuk battery
USB port untuk pengisian battery HP (opsional)
Bebas perawatan
Ramah lingkungan dan aman sesuai ROHS
Layanan purna jual se-Indonesia
Sedia listrik AC untuk TV, Radio atau alat lainnya
Perkemahan
Survei di lapangan
Untuk penerangan di desa
Pos Satpam
Pertambangan
Rumah tanpa listrik PLN
Daerah tidak terjangkau PLN
Cas aki mobil
APLIKASI
MODEL 1xLED 3W 2xLED 3W
SHS 12051 42 Jam 10 Jam 12 Jam
SHS 123051 70 Jam 19 Jam 22 Jam
3xLED 3W +1x Cas HP
* Dengan asumsi battery terisi penuh dan terpasang external battery 1 unit 12V 32Ah
* Dengan asumsi Ceiling Fan dan TV LCD 15” tipe standard
* Pengisian battery tergantung cuaca di masing-masing daerah
Power Up the basic electrical lighting and appliances
SHS12305I
SHS12051
SOLAR HOMESYSTEM
SHS-AC SERIES
40
OFF-GRID
SHS-DC Unit
Solar Sel
Battery Bank
Solar Controller
Bohlam DC
USB Output
Waktu ada sinar Matahari
Legend :
Tanpa sinar Matahari
TV, Radio,Lemari Es, dll
DC InverterListrik AC
OFF-GRID
SHS-AC SERIESBasic Lighting Needs for Everyone
SHS12051 SHS123051
SYSTEM VOLTAGE
INVERTER RATING
SOLAR PANEL
RATED WATT (STC)
TYPE OF SOLAR PV
INPUTMODEL
220VAC
Max. 12V 32Ah
Monocrystalline / Polycrystalline
1 Set
500W
100 Wp 135 Wp
BATTERYCAPACITY
WIRE SIZE / LENGTH
0 3 x 12V 7.5Ah SLA
11.0 VDC
12.5 VDC
Oms
Tergantung Pola Pemakainan
NYYHY 2 x 1.5 mm2
1 set kabel Solar Panel
-3.33 mV/°C/Cell (Float Voltage)
15.5 VDC
12 VDC 5%
13.4 VDC at 25°C
Indicate status of PV, Batt, load and Fault
- SOLAR PANEL
FLOAT VOLTAGE
BOOST VOLTAGE
LOAD DISCONNECT VOLTAGE
LOAD RECONNECT VOLTAGE
TEMP. COMPENSATION
OVER VOLTAGE PROTECTION
NO. OF DC OUTPUT CONNECTOR
RATED USB DC VOLTAGE
MAX. USB DC CURRENT
NO. OF USB PORT
TRANSFER TIME FROM PV TO BATT.
BACK UP TIME
WIRE SIZE / LENGTH
-0°C ~ +50°C
LED
ADDITIONAL ITEMS
ACCESSORIES
LED BULB WITH CABLES
ENVIRONMENT
DIMENSION (D X W X H)
MAX. DC OUTPUT CURRENT
PANEL DISPLAY
OPERATING TEMP
PHYSICAL CHARACTERISTICSHUMIDITY
STORAGE TEMP
RATED DC VOLTAGE
DC OUTPUT
- SHS UNIT
- SOLAR PANEL
WEIGHT (NETTO / BRUTTO)
- SHS UNIT
-20°C ~ +50°C
0 ~ 95% Non-considering
2 ADC
2 set 5W DC LED Bulb
2 2
SOLAR PANEL CONNECTOR
NYYHY 2 x 2.5 mm2
EXTERNAL BATTERY
EXTERNAL BATTERY CONNECTOR 1 Set
14.5 VDC at 25°C
12 VDC ±5%
Synthesized Sinewave
220 VAC
1 A
RATED POWER
WAVEFORM
NO. OF AC OUTPUT CONNECTOR
AC INPUT
RATED AC VOLTAGE
MAX. INPUT CURRENT
RATED AC VOLTAGE
AC OUTPUT220 VAC
500 Watt
5 VDC
1 ADC 1 ADC
1 1
1
2
Indicate status of PV, Batt, Load and Fault
1 set kabel Solar Panel dan 2 set kabel lampu DC
41
SOLAR ACCESSORIES
42
BOX BATTERY PJU
Siap dengan lobang mounting
Up to IP43 rating
Anti serangga
Outdoor powder coating
Desain modern & flexible
Mudah untuk memasang battery dan BCR
OFF-GRID
TIPE DIMENSI ( D x L x T) KETERANGAN
BSP 1001 239 x 439 x 459 1 buah battery kering 12V 65Ah/80Ah/100Ah
BSP 1002 239 x 557 x 572 2 buah battery kering 12V 65Ah/80Ah/100Ah
BSP 1501 239 x 572 x 472 1 buah battery kering 12V 150Ah
Tempat Penyimpanan Battery Penerangan Jalan Umum Solar Cell
T
D L
Kami melayani pembuatan desain box battery dengan ukuran sesuai kebutuhan customer (custome)
Jalan Area Kantor, Gudang, Pabrik.Area Taman Kota.Area Kampus, Sekolahan atau Perbankan.Area Perumahan, Pasar dan tempat Wisata.Area terminal, pelabuhan dan stasiun.
Panel Surya PWM Solar Charger PJU DC LED Box Battery Solar Battery
APLIKASI PJU
SOLAR STREET LIGHT
43
PJU TENAGA SURYA DENGAN LED
OFF-GRID
Hemat Energi karena 100% dari sinar matahariLokasi bisa jauh dari jaringan PLNBebas perawatanCahaya LED super terang dan awetHemat costLampu nyala secara otomatisOtonomi lampu sampai 2 hari kondisi mendungBergaransi dan layanan purna jual yang luas dan terjamin
KEUNGGULAN PJU
TIPE PJUE30W-S PJUE50W-S PJUE60W-S PJUE100W-S
Lampu Jalan 30W 50W 60W 100W
Panel 135 Wp (1 Unit) 100 Wp (2 Unit) 135 Wp (2 Unit) 100 Wp (4 Unit)
Charger Battery MPPT 10A MPPT 20A MPPT 20A MPPT 20A
Battery Deep Cycle 12V/70Ah Deep Cycle 12V/120Ah Deep Cycle 12V/70Ah Deep Cycle 12V/120Ah (2 Unit) (2 Unit)
Bracket Support 1 Set (atas tiang) 1 Set (atas tiang) 1 Set (atas Tiang) 1 Set (atas Tiang)
Box Peralatan 239 x 439 x 459 239 x 557 x 572 239 x 439 x 459 239 x 557 x 572
44
SOLAR INVERTER
WIFI DATA LOGGER
Compatible with most inverters on the market
Can be connected to up 64 inverters
Devices such as combiner box, electric meter and weather station, etc. can be connected
Two communication methods available, including Ethernet and WiFi
Data storage of over 25 years
Check real-time data of data logger and inverter via embedded Web Server
Dual mode of local monitoring and remote monitoring
ICA SolarWiFi Kit is suitable for homes and office building where network is available.
A WiFi module is integrated in the data logger, nabling data transmission via WiFi network. No
additional wiring or software is required far simplifying installation and reducing costs for users.
Furthermore, an independent web server is integrated in the data logger, which enables users to
directly to the WiFi Access Point of the data logger and to check the performance and yield of the
inverter even without any outer network.
WIFI
PV Panels Grid-Tied InverterMain Electrical Panel
* WiFi Data Logger is connected to the Grid Tied Inverter using RJ45 communication cable
45
WIFI DATA LOGGERSolar Accesories
TECHNICAL SPECIFICATIONMODEL SNV-WE015
GENERAL
Max. Number Of Inverters
Inverter Communication
Remote To Communication
Max. Communication Range
Communication Rate
Wifi Communication Range
Wifi Transmitting Power
Data Collection Intervals
Memory
Preferences Setting
Firmware Updates
Data Access
Status Display
Wifi Frequency
1-64
RS485/422/232
<1 KM
WiFi (802.11 b/g/n) Ethernet
5 minutes (Default)/
1-15 minutes (Optional)
4LEDs
SD Card/EEPROM(Optional)
400m in outdoor open area
without obstruction
802.11b/g/n:+20dBm/
+18dBm/15dBm (Max)
1200-19200bps (Adjustable)
Web Server/Serial AT Instruction
Serial/Wireless
Serial/WiFi point-to-point/
Remote server
2.4 GHz
ELECTRICAL
Input Voltage
Static Power Comsumption
Max. Instantaneous
Power Comsumption
ENVIRONMENTAL
Operating Temperature
Storage Temperature
Storage Humidity
Protection Class
PHYSICAL
Dimension (Lxwxh)
Weight
OTHER
Installation Method
Operating Humidity
Certificates
DC 5V
<1.6W
<2.5W
IP21
FCC, CE, RoHS
110mm* 80mm*26mm
10% - 90% Relative humidity
no condensation
-40 +85 C
1089
wall mounted or flawise
-10 +65 C
<40%
PV SYSTEM
TYPES OF PV SYSTEM
ON/OFF GRIDON-GRID(HYBRID)
Solar Power with Diesel Generator
47
Urban area with stable and rising electricity cost
Remote / urban area with stable electricity and
requires battery backup
Application:
Centralized PV Power Plant
- Batteries may be used to act as a backup power supply
- PV modules convert sunlight to electricity that can be stored inside a battery
or feed power back to the grid
- No battery required
- PV modules convert sunlight to electricity that feeds power back to the grid
- Works parallel with grid power to reduce electricity bill
HYBRID
(GRID-TIED) (STAND ALONE)OFF-GRID
Remote / rural area with unstable or no electricity and
requires battery backup
- Battery is the main source of electricity
- PV modules convert sunlight to electricity that can be stored in a battery
- Reduce fuel usage from diesel generator
Application:
Solar Home System
Solar Street Light
OFF GRID
Solar Water Pump
Application:
Grid Connected PV System
Roof Top PV System (Grid-Tied)
ON GRID
On Grid ( Grid-Tied ) Solar PV System Typical Application on Rooftop.
GRID-TIEDON GRID SOLAR PV SYSTEMTYPICAL APPLICATIONS
REDUCE ELECTRICITY BILL,NO BATTERY. Works any time the sun is shining!
48
ON-GRID
49
Start now to reap benefits earlier in the future.
Electricity Tariff :
R-2 : 3.500 VA to 5.500 VA
R-2 : > 6.600 VA
B-2 : 6.600 VA to 200 kVA
Installed Capacity:
Peak Sun Hour ( Based on NASA )
Effective Sunny Days ( Based on PLN )
Energy harvested in a day
Energy harvested in a year
January 2013
948
980
1035
January 2014
1145
1352
1352
5kW PV System
4.75
75%
17.85 kWh
6.51525 mWh
Upfront Cost for 5kW on Grid System :
Assume Electrical tariff to increase 10% per year
Return on Investment :
Approx. Rp. 125.000.000,-
Approx. 8 Years
January 2015
1524
1524
1524
100
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 200
200
300
400
500
600( Million )
( Year )
INITIAL INVESTMENT
PROFIT
BEP
Cummulate Savings Initiate Savings
CASE STUDY5 KW ON GRID AT HOUSE / OFFICE IN JAKARTA
ON-GRID
SOLAR PV SYSTEMPROJECT REFERENCES
Succesfully installed 84x 250Wp Solar Panels on Factory Roof (Including Construction of Structure to Support Panels)
Successfully completed laying of cables and installation of 1 x 20 kW 3 Phase Inverter
Successfully conducted testing andcommisioning
PROJECT 121 KW SOLAR on GRID ROOFTOPPV SYSTEM
Succesfully installed 32x 250Wp Solar Panels on Shophouse Roof (Including Construction of Structure to Support Panels)
Successfully completed laying of cables and installation of 3 x 3 kW Inverter
Successfully conducted testing andcommisioning
PROJECT 28 KW SOLAR on GRID ROOFTOPPV SYSTEM
50
ON-GRID
SOLAR PV SYSTEMPROJECT REFERENCES
Succesfully installed 60x 250Wp Solar Panels on Factory Roof (Including Construction of Structure to Support Panels)
Successfully completed laying of cables and installation of 2 x 10 kW Inverters
Successfully conducted testing andcommisioning
PROJECT 315 KW SOLAR on GRID ROOFTOPPV SYSTEM
Succesfully installed 12x 250Wp Solar Panels on Shophouse Roof (Including Construction of Structure to Support Panels)
Successfully completed laying of cables and installation of 1 x 3 kW Inverters
Successfully conducted testing andcommisioning
PROJECT 43 KW SOLAR on GRID ROOFTOPPV SYSTEM
51
ON-GRID
F.A.Q.ABOUT GRID-TIED PV SYSTEM
WHAT IS SOLAR PV GRID-TIED SYSTEM?
A solar PV grid-tied system is used to convert sunlight directly into electricity that can power your homes and workplace. The grid-tied system consists of only two main components: solar panels and the grid-tied PV inverter.
WHO IS IT FOR?
Grid-tied PV system is ideal for businesses and homeowners that want to reduce electricity cost and save money. It is especially suitable for homes and businesses that experience peak load during daytime.
HOW DOES GRID-TIED SYSTEM WORKS?
An array of solar panels installed on the rooftop, directly converts sunlight into DC power, and the DC power is then converted into AC power using a solar grid-tied inverter. The AC power produced by the grid-tied inverter is synchronized with power from the grid (i.e. PLN, 220Vac). When the power generated by sunlight exceeds current load usage, you may sell power back to the grid (i.e. PLN).
WHERE CAN I PUT THE SOLAR PV?
Solar panels can be securely installed on the roof of your house or building.
HOW LONG IS THE PAYBACK PERIOD FOR A TYPICAL GRID-TIED SYSTEM?
Maximum 6-10 years.
HOW MUCH YOU CAN SAVE DEPENDS ON THE SPACE YOU HAVE ?
For a typical 5.000w grid-tied system you may save up to Rp 1.000.000 per month on your electricity bill.
WHAT ARE THE BENEFITS OF INSTALLING A PV GRID-TIED SYSTEM?
Reduce electricity cost.The higher the electricity price, the more money you save!Doesn’t use batteries. No batteries to replace.Reduce consumption of diesel from genset.Sell power back to the grid (e.g. PLN).Reduce carbon emission.Go green – enjoy a cleaner and better energy.
DOES IT MAKE FINANCIAL SENSE TO INSTALL A PV GRID-TIED SYSTEM?
The higher the electricity price, the more money you save!Investment return from a PV grid-tied system is higher than putting money in the bank.
BANK DEPOSIT
7 - 9%
Adjustable, up & down
Min. Rp 1 Bill
PV SYSTEM
10 - 16% (or higher)
Progessively Higher
Rp 125 Mill ( 5kW )
PV SYSTEM
Investment ( per year )
Trend of Yield
Required Investment
52
ON-GRID
USE FREE ELECTRICITYFROM SUNLIGHT.
GRID-TIEDON GRID SOLAR PV FARMSOLAR FARM APPLICATIONS
On Grid ( Grid-Tied ) Solar PV System - Solar Farm Application
53
ON-GRID
54
WIFI
GRID TIED PV SYSTEM GIVES DIRECT SAVINGS TO YOUR
ELECTRIC BILLS BECAUSE ELECTRICITY GENERATED BY THE PANELS IS DIRECTLY
USED TO OFFSET THE HOUSEHOLD LOAD!
ON GRID SOLAR PV SYSTEMICA SOLAR GRID-TIED SOLAR PV SYSTEM
1
2
3
4Solar Panels convert sunlight into DC electricity.
Grid-tied PV Inverter, converts DC to AC electricity, which is synchronous to power grid.
The AC electricity is sent to the main electrical panel where it is connected directly to the grid.
Net metering calculates the net consumption of power (Power consumed by household - Power generated by PV). If there is surplus energy generated by PV system, it will be sent back to the utility grid and credited in our favour.
PV > Load
Legend :
PV < Load
PV Panels Grid-Tied Inverter
Net Metering
Utility Grid ( PLN )
5kW
+2kW
3kW
LoadAppliances
-3kW
8kW
Main Electrical Panel
ON-GRID
HOW IT WORKS
1 2 3
4
RELIABLE POWER SOURCEFROM BATTERY Ideal for remote area with no electricity
STAND ALONEOFF GRID SOLAR PV SYSTEMTYPICAL APPLICATIONS
Off Grid ( Stand-Alone ) Solar PV System Typical Application
Applied at Rural Areas.
55
OFF-GRID
1
2
3
4
PV modules convert sunlight into DC electricity.
A solar charge controller (or battery charger)
limits the rate at which electric current is added
to or drawn electric batteries. It prevents
overcharging and may prevent against
overvoltage, which can reduce battery lifespan,
and may pose a safety risk. It may also prevent
completely draining ("deep discharging")
a battery, or perform controlled discharges,
depending on the battery technology, to protect
battery life. The terms "charge controller"
or "charge regulator" may refer to either
a stand-alone device, or to control circuitry
integrated within a battery pack, battery-
powered device, or battery recharger.
Off-grid PV system uses deep cycle batteries
that are capable of supplying large amounts of
power for both short and long time periods.
Unfortunately many people substitute standard
car/truck batteries, but are disappointed when
they fail in a very short time. If you want your
appliances to work, run your refrigerator, stay
cool and your water to flow, then you need the
reliability of a good quality deep cycle battery.
Inverter converts the PV modules' direct-
current (DC) electricity to alternating current
(AC) to run daily home appliances.
41
3
2
56
OFF-GRID SOLAR PV SYSTEM
HOW IT WORKS
Sunlight supplied electricity
Legend :
PV Panels
Battery Bank
Off Grid Inverter Load Appliances
Battery supplied electricity
Legend :
OFF-GRID
OPTIMIZED TO WORK WITH MULTIPLEENERGY SOURCES.
HYBRIDHYBRID SOLAR PV SYSTEMTYPICAL APPLICATIONS
HYBRID Solar PV System Typical Application
57
HYBRID
58
PV Panels
Hybrid Systems are fully programmable :
HYBRID SOLAR PV SYSTEMICA SOLAR HYBRID SOLAR PV SYSTEM
Solar Hybrid Inverter Load Appliances
Utility Grid ( PLN )
Generator ( Genset )
Windmill
When choosing a solar power system, most households and businesses choose either a grid-connected or an off-grid system. But there's a third option. A hybrid solar system combines the best of both worlds: Combining energy storage with a grid connection to your property, hybrid systems can provide the flexibility of being able to store the energy you generate during the day instead of feeding it back into the grid - typically at a low feed-in tariff. This energy can then be used in the evening instead of buying power back at a higher price.
An advantage of hybrid systems is that they are able to control and balance the available sources of energy:
If the power generated by a solar array is insufficient to supply daytime loads as well as charge your batteries, the system can recharge your batteries from the grid when a lower off-peak electricity rate is available.
When your electricity usage goes above a certain level, electricity companies may charge you at a higher rate for this increased level of demand. Hybrid systems can provide ‘peak lopping’ where some stored power can be drawn from the batteries to help balance the power usage.
‘Grid support’ can also be provided by your hybrid system if your grid connection does not have the capacity to supply a load. The hybrid system could supply the extra power. And this may allow you to avoid a costly mains upgrade to your property.
HYBRID
59
INQUIRY3 Easy Steps for PV system Inquiries
Our team will conduct a site survey of the user’s intended purpose and location.- Power consumption and load profile- Space availability for PV system- Surrounding environment - Strength of existing structure (i.e. Roof)- Cabling route- Etc.
SURVEY1
A proposal of our solutionwill be drafted and presentedto the user.- Price breakdown- Expectations- Work diagram- CAD/3D Simulation of PV installation- Project schedule- Etc.
PROPOSAL2
PV installation normally takes about 7-14 working days. Final testing and commisioning for the Solar PV Systemwill be done at the end.
BEGIN INSTALLATION!3
60
ICA®, The No.1 UPS Brand in Indonesia, with close to 30 years of
expertise in providing stable and uninterruptible electricity for
Indonesia, understand electrical generation like no others. Our
products and staff are well adjusted to the local conditions for both
consumer and industrial level.
Your Safety, Our PrioritySafety is very important when dealing with electricity. Improper
instalation may lead to electrical failures or even fire hazards. Careful
planning and reliable installation is crucial! Our team of installation
technicians recheck all wirings and connections before testing and
commisioning, making sure you only enjoy the benefits of free energy
without any worry.
Complete Vertical System IntegrationUsing both ICASolar® Solar Panels and Solar Inverters, we maximise
the synergy between our panels and inverters to generate maximum
energy from the sun, maximising your profits. We provide a complete
integrated solar solution with out own installation teams to handle all
types of roof and ground surfaces. With us as your solar system
integrator, you need us and only us.
Proven Track Records
Unlike many of our competitors who are new in this field in Indo nesia,
we have a 30 years reliable track record in manufacturing products
suited to the local market. With the largest nationwide after-sales
support across the archipelago, there is no question we should be
your number one choice.
THE ICASOLARADVANTAGE
®
61
Founded in 1987, PT. Indodaya Cipta Lestari is the manufacturer of ICA® UPS & Stabilizer
with international management certification of ISO9001.
Regarded as the leading UPS brand in Indonesia, ICA® has a long track record of success
with proven design quality and accessible after-sales support. Products of ICA® UPS achieves
local content rating of ≥40% (TKDN) making it the brand of choice for local government
projects. ICA® products are sold all over Indonesia through extensive network of distributor
and retailers.
In 2011, ICA® expanded into the renewable energy market by specializing in the engineering,
design and development for solar photovoltaic (PV) products and system. The new division
addresses the needs of household, commercial and government clients. ICASolar® will
provide you with innovative, reliable and environmentally-friendly energy solutions.
PT. Indodaya Cipta Lestari Factory - Birdview of Production Line Factory
COMPANYOVERVIEW
CONTACTDETAILS
PV MODULE
Excellent low light performance on cloudydays,mornings and evenings
Anti-reflective coating
IP68 IP68 connectors enhance the reliability ofthe PV system
Certified to withstand challenging environmental conditions
Blowing sand resistance certification
Anti-PID
Salt mist corrosion certification
Fire test certification
Ammonia corrosion certification
2400 Pa wind load5400 Pa snow load 35mm hail stone at 97 km/hr
Great aesthetics for residential applicationsHigh efficiency,lower weight,Easy handling and optimum utilization of roof space
PID
LINEAR PERFORMANCE WARRANTY15 Year Product Warranty | 25 Year Linear Power Warranty
Gua
rant
eed
Pow
er
Years 5 12 15 20 25
Industry standard ICA Solar
80%
90%
100%
50W - 300WMaximum Power
17.40V - 36.50VMaximum Power Voltage
2.85A - 8.53AMaximum Power Current
22.50V - 45.60VOpen Circuit Voltage
3.04A - 9.01AShort Circuit Current
Additional value from ICA Solar linear warranty
POLYCRYSTALLINE | 50Wp - 300Wp
Polycrystalline panels are made up from the silicon offcuts, moulded to form blocks and create a cell made up of several bits of pure crystal and it is identifieable by its signature light or dark blue colour, but not uniformly some patches are lighter than others. The differences in appearance come about as a result of the manufacturing process.
However, this mis-alignment can help in some circumstances, because the cells work better from light at all angles, in low light, etc.
Power Tolerance
Short Circuit Current (Isc)
Voc Temperature Coefficient
Maximum System Voltage
Maximum Power Current (Imp)
Operating Temperature
%
A
A
%/℃
VDC
℃
-0.30
1000(TUV);600(UL)
-40 ~ +85
I-V Curves of PV Module 250 Wp(Cell Temp. 25℃)
I-V Curves of PV Module 250 Wpat Different Cell Temp. (AM1.5, 1000W/m²)
Dimension of module
Open Circuit Voltage (Voc)
VMaximum Power Voltage (Vmp)
V
Kg
Pmax Temperature Coefficient %/℃ -0.44
Isc Temperature Coefficient %/℃ +0.05
Maximum Series Fuse Rating A 15
NOCT ℃ 45±2
Weight
STC:1000W/m2.AM1.5 and 25℃ cell temperature: NOCT : Nominal Operating Cell Temperature
mm
Maximum Power (Pmax) W
I-V Curves Physical Characteristics
Unit:mm(inch)
Voltage(V)
Voltage(V)
Characteristics Unit
+3
17.60
2.85
22.50
3.04
4.5
50
700x510x30
50W
100
+3
17.60
5.69
22.60
6.09
7.7
1020x670x30
100W
135
+3
17.40
7.76
21.90
8.00
12
1480x670x30
135W
200
+3
35.20
5.69
45.60
6.02
15.3
1320x992x40
200W
H
250
+3
30.50
8.21
37.60
8.67
19
1640x992x40
250W
300
+3
36.50
8.22
45.10
8.67
24
1956x992x40
300W
PV MODULEPOLYCRYSTALLINE
Electrical Characteristics
150
+3
17.60
8.53
22.6
9.01
11
1470x670x30
150W
Solar 12-100 12V100AH
Solar Series SLA Battery
Page 1 of 2
Length
24HR(4.42A,1.80V)
106AH
Width
48HR(2.31A,1.80V)
111AH
Height Total Height
Full charged at 20 C: 0.005 Ohmo
3% of capacity declined per month at (20 C)o
102% 100% 85% 65%
Cycle use Float use
14.4-14.8V(-30mV/ C), max. Current: 25Ao
13.6-13.8V(-20mV/ C)o
40 Co
20 Co
0 Co
-15 Co
31Kg (68.4 lbs)
Capacity(20 C)o
Dimensions
Approx. Weight
Internal Resistance
Self Discharge
Capacity Affectedby Temp.(20HR)
Charge Voltage(20 C)o
Terminal Dimensions
330mm(13.0inch) 171mm(6.73inch) 214mm(8.43inch) 220mm(8.66inch)
POS NEG
Construction
�
�
�
�
�
�
�
�
�
�
Component ......Raw material
Positive ........Lead dioxide
Negative ........Lead
Container ........ABS
Cover ........ABS
Sealant ........Epoxy Resin
Safety valve .....EPDR
Terminal ........Copper
Separator ........AGM
Electrolyte ........Hybrid Gel
Solar Series
By combining the newly developed nano gel electrolyte and high densitypositive plate paste, BSB Solar series Valve regulated lead acidbatteries offers high daily cycle life and high recharge efficiency at thevery low charge current. The acid stratification is highly depressed byadding of gel electrolyte This range battery is highly suited to energystorage for renewable energy such as PV and wind turbine powersystems applications.
-
.
M6mm (0.24inch)
14mm (0.55inch)
3m
m(0
.12in
ch)
330mm(13.0inch) 171mm(6.73inch)
214m
m(8
.43in
ch)
220m
m(8
.66in
ch)
General Features
12 years float life at 20°CUp to 5 years design life at renewable energy applicationsWide operating temperature range of -15 to 60°CNano gel electrolyte eliminate the acid stratification and prolong cycle lifeRound trip efficiency as high as 85%Thick positive flat plate with high density pasteLow self-discharge rate and long shelf life( 1 year at 25°C)Excellent deep discharge recovery capability
100HR(1.2A,1.80V)
120AH
10HR(10A,1.80V)
100AH
Application
�
�
�
�
�
Photovoltaic system
Renewable Energy System
Electric Utility
Outdoor control Equipment
Railroad Utility
5 YearsDesigned Cycle Life
Solar 12-100Battery Model
12 YearsDesigned Floating Life
Page 2 of 2
COPYRIGHT BSB POWER COMPANY LIMITED
ISO9001
Solar Series SLA Battery
Storage time: months20191817161514131211109876543210
Capaci
ty (
%)
40
45
50
55
60
65
70
75
80
85
90
95
100
105
110
Self Discharge Characteristics
0.25
0.10
0
20 0.05
60
400.15
0.20
0 2
100
120
80
(CA) (V/Cell)
84 6 10 12
Charge Characteristic
ChargeCapacity
ChargeVoltage
100%Discharge
Charge Current
Time(hour)
0
Charg
e
Capacit
y
Charg
e
Curr
ent
Charg
e
Volt
age
5 %Discharge0
40 Co
30 Co 20 C
o
2.33
2.17
2.00
1.83
(%) Constant Charge At 0.25CA-2.30V (20 C)o
Solar 12-100 12V100AH
Constant current discharge ratings-amperes at 20 Co
TIME 1HR 3HR 5HR 10HR 24HR 48HR 72HR 100HR 120HR
CUT-OFF VOLTAGE 1.80 1.80 1.80 1.80 1.80 1.80 1.80 1.80 1.80
CAPACITY(AH) 65 75 87 100 106 111 116 120 123
Cycling ability (20 C)o
Capaci
tyre
main
ing
(%)
Cycle times(cycles)
100%dischargedepth
50%dischargedepth
25%dischargedepth
10%dischargedepth
350 700 1050 1400 1750 2100 2450 2800 3150 3500 3850 4200 4550
30
40
50
60
70
80
90
100
Shallow cycling at high state of charge
Cycle times (cycles)
Shallow cycling at low state of charge
End
of
disch
arg
evo
ltage
(V)
0 5 10 15 20 25 30 35 40 45 50 1 5 10 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90 95 100
11.0
11.5
12.0
12.5
13.0
Cycle Discharge Voltage Curve (Test standard BS EN 61427:2005)
20mm
10mm 92mm
270mm
330m
m
Solar 12-100 Horizonal Installation Drawing