Pro-Line Catalog - Fall 2009
-
Upload
pro-line-racing -
Category
Documents
-
view
231 -
download
1
description
Transcript of Pro-Line Catalog - Fall 2009
Mazdaspeed6 #1487-00; #1487-11 (light) fits 190mm TC
Mazda6 #1465-00; #1465-11 (light) fits 190mm TC#1466-00 fits 200mm TC
Mulsanne LMP #1501-00 fits 200mm on-road pan car chassis
Chevy® Corvette C6-R #1499-00 fits 200mm on-road pan car chassis Sophia GT
#1502-00 fits 200mm on-road pan car chassis
C-HD #1229-30 fits 1:10 oval chassis
O.R.T (Oval Racing Truck)#1227-21 fits 1:10 oval chassis
AMR-12#1611-21 fits 1:12 on-road chassis
P.O.Box 456 Beaumont, CA 92223 Ph: 951.849.9781 Fax: 951.922.9311
P905B - High Downforce#1500-21 fits 235mm on-road pan car chassis
P909 fits 1:8 on-road #1504-30 (light); #1504-40
TCC#1230-30 fits 1:10 oval and 200mm TC
Dodge Stratus 3.0#1476-01 fits 190mm TC#1477-00 fits 200mm TC
LTC-R (Rubber)#1505-25 (light); #1505-30 fits 190mm TC
DNA¹ #1486-00 fits 190mm TCDNA² #1488-00 fits 190mm TCDNA³ #1490-00 fits 200mm TC
R9-F (Foam) #1497-00 fits 190mm TCR9-R (Rubber) #1498-00; #1498-11 (light) fits 190mm TC
see our complete line atall tires & bodiesmade in the usa
Live Customer Support 1-800-899-RACE (7223)
All Pro-Line & PROTOform bodies are sold clear and are shown painted for advertising purposes only.Wheels, tires & bodies sold separately, unless otherwise noted. MAXX®, REVO®, SLASH®, SLAYER®, JATO®, STAMPEDE® & RUSTLER® are registered trademarks of TRAXXAS L.P., used with permission.
c a t a l o gproduct
1:5
off-
road
: p14
-15
1:8
truc
k: p4
-5
1:8 buggy: p2-3monster truck: p6-7
rock crawling: p8-9
short course & desert truck: p10-11
1:10 truck: p12-13
- Chad Bradley, Pro-Line Team Driver
I was amazed at how long they V3 version tires lasted and how well my car handled. It was like cheating”.
- D.L., TeknoRC
I’m not an expert driver or setup guru, but the positive change in driveability while using the V3s is dramatic. My vehicles are noticeably smoother around the track and I definitely feel more competitive with them”.
Why V3?20% wider then standard 1:8 tires
Greater traction for more control andfaster lap times
Superior hold as you throttle out of corners
CRAVE THE RUSH...SHIFT OVER TO
World Champion 1:8 Buggy Tires & Wheels
pro-line’s v3 tires
Crowd Pleazer 2.0#3192-00 �ts MBX5/5R & XB8 #3208-00 �ts X1-CR#3214-00 �ts MP777 SP2 #3232-00 �ts 8ight (shown)#3260-00 �ts RC8 #3265-00 �ts Hyper 8/8.5#3279-00 �ts Hyper 9 #3282-00 �ts XB808(clear body, wing sold separately)
SHIFT#3289-00 �ts MBX-6 (shown) #3295-40 �ts MP9#3298-40 �ts D8 #3303-40 �ts 8ight 2.0(clear body, wing sold separately)
NEW BREED
Velocity V3 Wheels• Maintains track width, while being 5mm wider than V2 wheels
• Made from durable, lightweight nylon
• Available in yellow & white, pre-glued to 2 different Pro-Line tires in 3 different compounds
#2703-02 (Yellow) #2703-04 (White)
Bow-Tie V3#9027-00 (XTR) #9027-01 (M2) #9027-02 (M3)
Pre-Glued to White Velocity V3 Wheels#9027-31 (M2) #9027-32 (M3)
Pre-Glued to Yellow Velocity V3 Wheels#9027-41 (M2) #9027-42 (M3)
• Tread design of 2006-2007 IFMAR 1:8 Off-Road World Champion• 12% more width adapts 2 more rows of tread• Available in XTR, M2 & M3 compounds, tires only, or pre-glued to yellow or white Pro-Line Velocity V3 wheels
• Tread design of 2008-2009 IFMAR 1:8 Off-Road World Champion• Increased traction with added 12% width is perfect for bluegroove tracks• Available in XTR, M2 & M3 compounds, tires only, or pre-glued to yellow or white Pro-Line Velocity V3 wheels
Revolver V3#9028-00 (XTR) #9028-01 (M2) #9028-02 (M3)
Pre-Glued to White Velocity V3 Wheels#9028-31 (M2) #9028-32 (M3)
Pre-Glued to Yellow Velocity V3 Wheels#9028-41 (M2) #9028-42 (M3)
2009 EUROPEANc h a m p i o n
2000-01world champ
2008 europeanc h a m p i o n
Bow-Tie fits V2 wheels
#9025-00 (XTR, pair)#9025-01 (M2, pair) #9025-02 (M3, pair)
Pre-Mounted on V2 wheels:#9025-31 (M2, White, pair)#9025-32 (M3, White, pair)#9025-41 (M2, Yellow, pair)#9025-42 (M3, Yellow, pair)
Hole Shot fits V2 wheels
#9026-00 (XTR, pair) #9026-01 (M2, pair) #9026-02 (M3, pair)
Pre-Mounted on V2 wheels:#9026-31 (M2, White, pair)#9026-32 (M3, White, pair)#9026-41 (M2, Yellow, pair)#9026-42 (M3, Yellow, pair)
Revolver fits V2 wheels
#9029-00 (XTR, pair)#9029-01 (M2, pair) #9029-02 (M3, pair)
Pre-Mounted on V2 wheels:#9029-31 (M2, White, pair)#9029-32 (M3, White, pair)#9029-41 (M2, Yellow, pair)#9029-42 (M3, Yellow, pair)
Caliber fits V2 wheels
#9030-00 (XTR, pair)#9030-01 (M2, pair) #9030-02 (M3, pair)
Pre-Mounted on V2 wheels:#9030-31 (M2, White, pair)#9030-32 (M3, White, pair)#9030-41 (M2, Yellow, pair)#9030-42 (M3, Yellow, pair)
Crime Fighter fits V2 wheels
#9014-00 (XTR, pair) #9014-01 (M2, pair) #9014-02 (M3, pair)
Pre-Mounted on V2 wheels:#9014-31 (M2, White, pair)#9014-32 (M3, White, pair)#9014-41 (M2, Yellow, pair)#9014-42 (M3, Yellow, pair
Knuckles 2.0 fits V2 wheels
#9020-01 (M2, pair)
Badlands fits V2 wheels
#9021-00 (XTR, pair)
Pre-Mounted on V2 wheels:#9021-30 (XTR, White, pair)
Inside Job fits V2 wheels
#9023-02 (M3, pair)
Heavy rain and a cold breeze swept in the day before, only to brew questions and doubt to who had the right plan. Which tire was the answer? In a strategic move, Pro-Line's Renaud Savoya trusted the Ultimate All-Track Caliber tire to confront and conquer the 2009 European Championship! PROLINERACING.com
2006-07world champ
2008-09world champ
8TH SCALE BUGGY
- Chad Bradley, Pro-Line Team Driver
I was amazed at how long they V3 version tires lasted and how well my car handled. It was like cheating”.
- D.L., TeknoRC
I’m not an expert driver or setup guru, but the positive change in driveability while using the V3s is dramatic. My vehicles are noticeably smoother around the track and I definitely feel more competitive with them”.
Why V3?20% wider then standard 1:8 tires
Greater traction for more control andfaster lap times
Superior hold as you throttle out of corners
CRAVE THE RUSH...SHIFT OVER TO
World Champion 1:8 Buggy Tires & Wheels
pro-line’s v3 tires
Crowd Pleazer 2.0#3192-00 �ts MBX5/5R & XB8 #3208-00 �ts X1-CR#3214-00 �ts MP777 SP2 #3232-00 �ts 8ight (shown)#3260-00 �ts RC8 #3265-00 �ts Hyper 8/8.5#3279-00 �ts Hyper 9 #3282-00 �ts XB808(clear body, wing sold separately)
SHIFT#3289-00 �ts MBX-6 (shown) #3295-40 �ts MP9#3298-40 �ts D8 #3303-40 �ts 8ight 2.0(clear body, wing sold separately)
NEW BREED
Velocity V3 Wheels• Maintains track width, while being 5mm wider than V2 wheels
• Made from durable, lightweight nylon
• Available in yellow & white, pre-glued to 2 different Pro-Line tires in 3 different compounds
#2703-02 (Yellow) #2703-04 (White)
Bow-Tie V3#9027-00 (XTR) #9027-01 (M2) #9027-02 (M3)
Pre-Glued to White Velocity V3 Wheels#9027-31 (M2) #9027-32 (M3)
Pre-Glued to Yellow Velocity V3 Wheels#9027-41 (M2) #9027-42 (M3)
• Tread design of 2006-2007 IFMAR 1:8 Off-Road World Champion• 12% more width adapts 2 more rows of tread• Available in XTR, M2 & M3 compounds, tires only, or pre-glued to yellow or white Pro-Line Velocity V3 wheels
• Tread design of 2008-2009 IFMAR 1:8 Off-Road World Champion• Increased traction with added 12% width is perfect for bluegroove tracks• Available in XTR, M2 & M3 compounds, tires only, or pre-glued to yellow or white Pro-Line Velocity V3 wheels
Revolver V3#9028-00 (XTR) #9028-01 (M2) #9028-02 (M3)
Pre-Glued to White Velocity V3 Wheels#9028-31 (M2) #9028-32 (M3)
Pre-Glued to Yellow Velocity V3 Wheels#9028-41 (M2) #9028-42 (M3)
2009 EUROPEANc h a m p i o n
2000-01world champ
2008 europeanc h a m p i o n
Bow-Tie fits V2 wheels
#9025-00 (XTR, pair)#9025-01 (M2, pair) #9025-02 (M3, pair)
Pre-Mounted on V2 wheels:#9025-31 (M2, White, pair)#9025-32 (M3, White, pair)#9025-41 (M2, Yellow, pair)#9025-42 (M3, Yellow, pair)
Hole Shot fits V2 wheels
#9026-00 (XTR, pair) #9026-01 (M2, pair) #9026-02 (M3, pair)
Pre-Mounted on V2 wheels:#9026-31 (M2, White, pair)#9026-32 (M3, White, pair)#9026-41 (M2, Yellow, pair)#9026-42 (M3, Yellow, pair)
Revolver fits V2 wheels
#9029-00 (XTR, pair)#9029-01 (M2, pair) #9029-02 (M3, pair)
Pre-Mounted on V2 wheels:#9029-31 (M2, White, pair)#9029-32 (M3, White, pair)#9029-41 (M2, Yellow, pair)#9029-42 (M3, Yellow, pair)
Caliber fits V2 wheels
#9030-00 (XTR, pair)#9030-01 (M2, pair) #9030-02 (M3, pair)
Pre-Mounted on V2 wheels:#9030-31 (M2, White, pair)#9030-32 (M3, White, pair)#9030-41 (M2, Yellow, pair)#9030-42 (M3, Yellow, pair)
Crime Fighter fits V2 wheels
#9014-00 (XTR, pair) #9014-01 (M2, pair) #9014-02 (M3, pair)
Pre-Mounted on V2 wheels:#9014-31 (M2, White, pair)#9014-32 (M3, White, pair)#9014-41 (M2, Yellow, pair)#9014-42 (M3, Yellow, pair
Knuckles 2.0 fits V2 wheels
#9020-01 (M2, pair)
Badlands fits V2 wheels
#9021-00 (XTR, pair)
Pre-Mounted on V2 wheels:#9021-30 (XTR, White, pair)
Inside Job fits V2 wheels
#9023-02 (M3, pair)
Heavy rain and a cold breeze swept in the day before, only to brew questions and doubt to who had the right plan. Which tire was the answer? In a strategic move, Pro-Line's Renaud Savoya trusted the Ultimate All-Track Caliber tire to confront and conquer the 2009 European Championship! PROLINERACING.com
2006-07world champ
2008-09world champ
8TH SCALE BUGGY
• Reusable Molded Foams
• Super long-lasting formulated raw material
• Provides optimal stability for your tire & wheel
• Included with every VTR tire!
VTR 1:8 Truck Foam Inserts
VTR
VTR
IT’S IN THE DETAILS...AND THE RESULTS
1:8 TRUCK TIRES
STREET TALKI ran the Memorial Day Shoot Out and the new [VTR] on the truggy is AWESOME! I TQ'd both buggy & truggy with a win in truggy and 2nd in buggy after running out of gas with 15min left in a 45min main. I had a half track lead on Lutz and Bradley.”“
what you needto know:
VTR 1:8 Truck Facts• Complete VTR set-up is 9% lighter versus
competition
• Lighter weight adds longer bearing life and faster lap times
• Under high acceleration, experience highly reduced tire sidewall flex
• All Pro-Line Tires are made here in the U.S.A. at Pro-Line's California Factory. Not overseas & not in job shops. We are committed to made in the U.S.A.
- Phillip Atondo, Pro-Line Customer
• Ready to mount highly balanced wheel system • Strategic molded glue channels throughout the
wheel carcass • Enhanced bonding surface area makes gluing
simple and fast
Zero o�set#2800-02 (Yellow, 4-pack)#2800-04 (White 4-pack)
1/2" O�set#2801-02 (Yellow, 4-pack)#2801-04 (White 4-pack)
VTR 1:8 Truck Wheels
Faster Acceleration, Dramatic Braking Control& Optimum Cornering Ability =
Revolver VTR 4.0”(pair)#9031-00 (XTR, Firm)#9031-01 (M2, Medium) #9031-02 (M3, Soft)• Fits 4.0” (VTR) wheels• Includes molded foam inserts
Caliber VTR 4.0” (pair)#9032-00 (XTR, Firm)#9032-01 (M2, Medium) #9032-02 (M3, Soft)• Fits 4.0” (VTR) wheels• Includes molded foam inserts
Hole Shot VTR 4.0” (pair)#9033-00 (XTR, Firm)#9033-01 (M2, Medium) #9033-02 (M3, Soft)• Fits 4.0” (VTR) wheels• Includes molded foam inserts
Sign up for PL's monthly Newsletter & get up to 25% OFF your next order @ PROLINERACING.com
HardDrive by PROTOform #1496-00 fits 8ight T(clear body, wing sold separately)
Crowd Pleazer 2.0#3213-00 fits X1-CRT (shown)#3228-00 fits MBX5T#3258-00 fits STRR(clear body, wing sold separately)
SHIFT#3285-00 fits X2-CRT#3287-00 fits RC8T (shown)#3309-60 fits MBX-6T#3304-60 fits 8ight T 2.0(clear body, wing sold separately)
• Reusable Molded Foams
• Super long-lasting formulated raw material
• Provides optimal stability for your tire & wheel
• Included with every VTR tire!
VTR 1:8 Truck Foam Inserts
VTR
VTR
IT’S IN THE DETAILS...AND THE RESULTS
1:8 TRUCK TIRES
STREET TALKI ran the Memorial Day Shoot Out and the new [VTR] on the truggy is AWESOME! I TQ'd both buggy & truggy with a win in truggy and 2nd in buggy after running out of gas with 15min left in a 45min main. I had a half track lead on Lutz and Bradley.”“
what you needto know:
VTR 1:8 Truck Facts• Complete VTR set-up is 9% lighter versus
competition
• Lighter weight adds longer bearing life and faster lap times
• Under high acceleration, experience highly reduced tire sidewall flex
• All Pro-Line Tires are made here in the U.S.A. at Pro-Line's California Factory. Not overseas & not in job shops. We are committed to made in the U.S.A.
- Phillip Atondo, Pro-Line Customer
• Ready to mount highly balanced wheel system • Strategic molded glue channels throughout the
wheel carcass • Enhanced bonding surface area makes gluing
simple and fast
Zero o�set#2800-02 (Yellow, 4-pack)#2800-04 (White 4-pack)
1/2" O�set#2801-02 (Yellow, 4-pack)#2801-04 (White 4-pack)
VTR 1:8 Truck Wheels
Faster Acceleration, Dramatic Braking Control& Optimum Cornering Ability =
Revolver VTR 4.0”(pair)#9031-00 (XTR, Firm)#9031-01 (M2, Medium) #9031-02 (M3, Soft)• Fits 4.0” (VTR) wheels• Includes molded foam inserts
Caliber VTR 4.0” (pair)#9032-00 (XTR, Firm)#9032-01 (M2, Medium) #9032-02 (M3, Soft)• Fits 4.0” (VTR) wheels• Includes molded foam inserts
Hole Shot VTR 4.0” (pair)#9033-00 (XTR, Firm)#9033-01 (M2, Medium) #9033-02 (M3, Soft)• Fits 4.0” (VTR) wheels• Includes molded foam inserts
Sign up for PL's monthly Newsletter & get up to 25% OFF your next order @ PROLINERACING.com
HardDrive by PROTOform #1496-00 fits 8ight T(clear body, wing sold separately)
Crowd Pleazer 2.0#3213-00 fits X1-CRT (shown)#3228-00 fits MBX5T#3258-00 fits STRR(clear body, wing sold separately)
SHIFT#3285-00 fits X2-CRT#3287-00 fits RC8T (shown)#3309-60 fits MBX-6T#3304-60 fits 8ight T 2.0(clear body, wing sold separately)
ESCAPE FROM STOCK...
direct fit
23mm hd system
Velocity 6 3.8”
CommandoBead-Loc HD 3.8”
• Fits Pro-Line 23mm Heavy Duty hex system
• Uses Pro-Line 3.8” tires (not recommended for RoadRage)
• Replaceable bead-loc rings & hardware included
• Bright & durable chromefinish
• Direct fit on standard 14mm hex
• Uses Pro-Line 3.8” tires
• Bright & durable chrome finish
#2664-01
#2680-01 Chrome w/ Gold rings#2680-02 Chrome w/ Silver rings
Cheyenne HD 3.8”#2679-01
• Fits Pro-Line 23mm Heavy Duty hex system
• Uses Pro-Line 3.8” tires
• Bright & durable chrome finish
the perfect upgrade =
(40 Series) Tires for your E-Revo®, Revo® 2.5/3.3, E-Maxx®, & T-Maxx® 2.5/3.3
style + performance
3.8”3.8”Tires for your E-Revo®, Revo® 2.5/3.3, E-Maxx®, & T-Maxx® 2.5/3.33.2”3.2”
slipstream#3300-60 fits E-Revo® (clear body)
23mm HD Hex#6033-00 for Savage & Warhead
#6034-00 for REVO®, MAXX®, MGT,LST,&TNX
Wheel3.2”3.2”
Anywhere! StreetStreet RaceDirtSand All-TerrainAll-TerrainBig Joe 3.8"
#1103-00 (M2, pair)fits 3.8” wheels
Road Rage 3.8" #1104-00 (M2, pair)
fits 3.8” wheels
Bow-Tie 3.8" #1113-00 (M2, pair)
fits 3.8” wheels
MOAB 3.8"#1117-00 (M2, pair)
fits 3.8” wheels
Masher 3.2"#1075-00 (M2, pair)
fits 3.2” wheels
Road Rage 3.2"#1082-00 (M2, pair)
fits 3.2” wheels
Paddle 3.2"#1084-00 (M2, pair)
fits 3.2” wheels
Mulcher 3.8" #1085-00 (M2, pair)
fits 3.2” wheels
Velocity 6 3.2" 1/2” o�set
#2662-00 (Chrome, pair) fits 14mm hex, 3.2“ tires
From Tires to Food...Since 2007, Pro-Line employees have volunteered and contributed to Carol's kitchen, a local non-profit who serves 98,000 meals a year to families less fortunate. PROLINERACING.com
Chevy® Silverado#3229-00 (clear body) fits MAXX®, REVO®, & Savage#3230-00 (clear body) fits T/E/2.5-MAXX®, REVO®, & Savage
‘80 Chevy® C-10#3201-00 (clear body) fits MAXX®, REVO®, & Savage#3227-00 (clear body) fits E-MAXX®, E-REVO®, REVO® 3.3 & MGT
VW® Baja Bug#3238-60 (clear body) fits MAXX® (long chassis), REVO® 3.3, and LST#3238-61 (clear body) fits MAXX® (short chassis), REVO® 2.5, Savage, TNX, and Flux
MONSTER TRUCK
ESCAPE FROM STOCK...
direct fit
23mm hd system
Velocity 6 3.8”
CommandoBead-Loc HD 3.8”
• Fits Pro-Line 23mm Heavy Duty hex system
• Uses Pro-Line 3.8” tires (not recommended for RoadRage)
• Replaceable bead-loc rings & hardware included
• Bright & durable chromefinish
• Direct fit on standard 14mm hex
• Uses Pro-Line 3.8” tires
• Bright & durable chrome finish
#2664-01
#2680-01 Chrome w/ Gold rings#2680-02 Chrome w/ Silver rings
Cheyenne HD 3.8”#2679-01
• Fits Pro-Line 23mm Heavy Duty hex system
• Uses Pro-Line 3.8” tires
• Bright & durable chrome finish
the perfect upgrade =
(40 Series) Tires for your E-Revo®, Revo® 2.5/3.3, E-Maxx®, & T-Maxx® 2.5/3.3
style + performance
3.8”3.8”Tires for your E-Revo®, Revo® 2.5/3.3, E-Maxx®, & T-Maxx® 2.5/3.33.2”3.2”
slipstream#3300-60 fits E-Revo® (clear body)
23mm HD Hex#6033-00 for Savage & Warhead
#6034-00 for REVO®, MAXX®, MGT,LST,&TNX
Wheel3.2”3.2”
Anywhere! StreetStreet RaceDirtSand All-TerrainAll-TerrainBig Joe 3.8"
#1103-00 (M2, pair)fits 3.8” wheels
Road Rage 3.8" #1104-00 (M2, pair)
fits 3.8” wheels
Bow-Tie 3.8" #1113-00 (M2, pair)
fits 3.8” wheels
MOAB 3.8"#1117-00 (M2, pair)
fits 3.8” wheels
Masher 3.2"#1075-00 (M2, pair)
fits 3.2” wheels
Road Rage 3.2"#1082-00 (M2, pair)
fits 3.2” wheels
Paddle 3.2"#1084-00 (M2, pair)
fits 3.2” wheels
Mulcher 3.8" #1085-00 (M2, pair)
fits 3.2” wheels
Velocity 6 3.2" 1/2” o�set
#2662-00 (Chrome, pair) fits 14mm hex, 3.2“ tires
From Tires to Food...Since 2007, Pro-Line employees have volunteered and contributed to Carol's kitchen, a local non-profit who serves 98,000 meals a year to families less fortunate. PROLINERACING.com
Chevy® Silverado#3229-00 (clear body) fits MAXX®, REVO®, & Savage#3230-00 (clear body) fits T/E/2.5-MAXX®, REVO®, & Savage
‘80 Chevy® C-10#3201-00 (clear body) fits MAXX®, REVO®, & Savage#3227-00 (clear body) fits E-MAXX®, E-REVO®, REVO® 3.3 & MGT
VW® Baja Bug#3238-60 (clear body) fits MAXX® (long chassis), REVO® 3.3, and LST#3238-61 (clear body) fits MAXX® (short chassis), REVO® 2.5, Savage, TNX, and Flux
MONSTER TRUCK
Scale
Flat Iron 1.9” CHISEL 1.9”
#1147-14 (G8)w/ memory foam
#1152-14 (G8)w/ memory foam
All-Terrain ScaleAggressiveAll-Terrain Short CompScale
Tall Comp/Ultra Low Wear
Tall Comp/Ultra Low Wear
Masher 2000
#1074-00 (M2)#1074-02 (M3)
MOAB
#1120-00 (M2)#1120-02 (M3)
Badlands
#1144-00 (M2)#1144-02 (M3)
Hammer
#1145-02 (M3)w/ standard foam
#1145-14 (G8)w/ memory foam
Flat Iron
Titus 2.2” WeightedBead-loc
titus weightedbead-loc wheels
Titus 1.9” WeightedBead-loc
Chisel G8
#1149-14 (G8)w/ memory foam
#2713-05black/black
#2713-03chrome/black
#2712-05black/black
#2712-03chrome/black
Assortment #1#6040-00
cooler, winch box,gas can, hd winch
Assortment #2#6045-00
high lift jack, pry bar,shovel, axe
Vertical Body Mount Kit#6059-00
direct fit on ax10 chassis, or custom application
Light Bar#6047-00
direct fit on roofrack system
Roof Rack#6046-00
direct fit oncgr roll cage
Western Bumpers#6052-00
for 1:10 crawlers
#1146-02 (M3)w/ standard foam
#1146-11 (M2)w/ memory foam#1146-12 (M3)
w/ memory foam
Scale AccessoryChecklist
Extreme Traction & Engineered Weight Precision 1.9” Wheels & Tires
• Available in 1.9” & 2.2“, chrome or black wheels with black bead-loc rings
• All-new 3-Piece easy assembly
• Extremely detailed injection molded design
• Bead-locking sleeves
• 4oz. weights for each 1.9” wheel
• 8oz. weights for each 2.2” wheel
• O-rings to secure weight to wheel (2 per wheel)
CRAWL ANYWHERE!
tire: flat iron 2.2”wheel: titus 2.2”
dodge ramcharger cgr#3299-60fits 1:10 crawlers
‘80 chevy® blazer cgr#3244-60 (clear body w/cage)#3244-61 (clear body only)fits 1:10 crawlers & monster trucks
crowd pleazer rc#3308-40 (clear body)fits 1:10 crawlers
rockstar#3305-30 (clear body) fits 1:18 crawlers#3262-00 (clear body) fits 1:10 crawlers
vw® baja bug#3238-30 (clear body) fits 1:18 crawlers#3238-40 (clear body) fits 1:10 crawlers
On-
site
tech
: Dan
iel A
dam
s P
aint
/Pho
to: J
ohn
Kelis
hes
with Rock Crawling Gear from
2.2” Rock Crawling Tires & Wheels
A PRO-LINE INNOVATION
for high-performance scale rock crawling. fits pl titus wheels
For 1.9” Wheels (shown):#2712-10 Includes (2) 2oz., (2) 6oz. weights and o-rings
For 2.2” Wheels:#2713-10 Includes (2) 4oz., (2) 12oz. weights and o-rings
Titus TUNER WEIGHTS
ROCK CRAWLING
Want more Selection & $avings? Visit us @ PROLINERACING.com
Scale
Flat Iron 1.9” CHISEL 1.9”
#1147-14 (G8)w/ memory foam
#1152-14 (G8)w/ memory foam
All-Terrain ScaleAggressiveAll-Terrain Short CompScale
Tall Comp/Ultra Low Wear
Tall Comp/Ultra Low Wear
Masher 2000
#1074-00 (M2)#1074-02 (M3)
MOAB
#1120-00 (M2)#1120-02 (M3)
Badlands
#1144-00 (M2)#1144-02 (M3)
Hammer
#1145-02 (M3)w/ standard foam
#1145-14 (G8)w/ memory foam
Flat Iron
Titus 2.2” WeightedBead-loc
titus weightedbead-loc wheels
Titus 1.9” WeightedBead-loc
Chisel G8
#1149-14 (G8)w/ memory foam
#2713-05black/black
#2713-03chrome/black
#2712-05black/black
#2712-03chrome/black
Assortment #1#6040-00
cooler, winch box,gas can, hd winch
Assortment #2#6045-00
high lift jack, pry bar,shovel, axe
Vertical Body Mount Kit#6059-00
direct fit on ax10 chassis, or custom application
Light Bar#6047-00
direct fit on roofrack system
Roof Rack#6046-00
direct fit oncgr roll cage
Western Bumpers#6052-00
for 1:10 crawlers
#1146-02 (M3)w/ standard foam
#1146-11 (M2)w/ memory foam#1146-12 (M3)
w/ memory foam
Scale AccessoryChecklist
Extreme Traction & Engineered Weight Precision 1.9” Wheels & Tires
• Available in 1.9” & 2.2“, chrome or black wheels with black bead-loc rings
• All-new 3-Piece easy assembly
• Extremely detailed injection molded design
• Bead-locking sleeves
• 4oz. weights for each 1.9” wheel
• 8oz. weights for each 2.2” wheel
• O-rings to secure weight to wheel (2 per wheel)
CRAWL ANYWHERE!
tire: flat iron 2.2”wheel: titus 2.2”
dodge ramcharger cgr#3299-60fits 1:10 crawlers
‘80 chevy® blazer cgr#3244-60 (clear body w/cage)#3244-61 (clear body only)fits 1:10 crawlers & monster trucks
crowd pleazer rc#3308-40 (clear body)fits 1:10 crawlers
rockstar#3305-30 (clear body) fits 1:18 crawlers#3262-00 (clear body) fits 1:10 crawlers
vw® baja bug#3238-30 (clear body) fits 1:18 crawlers#3238-40 (clear body) fits 1:10 crawlers
On-
site
tech
: Dan
iel A
dam
s P
aint
/Pho
to: J
ohn
Kelis
hes
with Rock Crawling Gear from
2.2” Rock Crawling Tires & Wheels
A PRO-LINE INNOVATION
for high-performance scale rock crawling. fits pl titus wheels
For 1.9” Wheels (shown):#2712-10 Includes (2) 2oz., (2) 6oz. weights and o-rings
For 2.2” Wheels:#2713-10 Includes (2) 4oz., (2) 12oz. weights and o-rings
Titus TUNER WEIGHTS
ROCK CRAWLING
Want more Selection & $avings? Visit us @ PROLINERACING.com
#3284-00 #3283-00 #3293-60
#2714-02 Black/Black#2714-03 Stainless/Black#2714-04 Red/Black
#2715-02 Black/Black#2715-03 Stainless/Black#2715-04 Red/Black
SLASH® Front 2.2”/3.0” SLASH® Rear 2.2”/3.0”
#2716-02 Black/Black#2716-04 Red/Black
#2717-02 Black/Black#2715-04 Red/Black
SC10 Front 2.2”/3.0” SC10 Rear 2.2”/3.0”
• No gluing required! 3-pieces engineered for easy install
• Six stainless steel screws = solid interloc durability
• Front 2.2” gives a realistic look and 3.0” Rear allows for suspension clearance
• Pre-Mounted Bead-locs available with red rings
2.2”/3.0” Tires• Direct fit for 2nd Gen Slash®, Slayer®,
SC10, & P-L Split Six wheels
• Internal ribbing provides extreme sidewall support
• Made from super-soft (M2) IFMAR World Champion compound
• NEW! High performance/long lasting inserts for P-L Split Six and stock wheels
#1078-01 (M2 Medium, pair)
Mounted on Red/Black Split Six wheels:
#1078-21 (M2 Slash® FRONT, pair)
#1078-22 (M2 Slash® REAR, pair)
#1078-11 (M2 Slayer® REAR, pair)
ALLTERRAIN
switch
DESERT RAT hardcore carnage
2.2”/3.0” Tires
HI-TORQUERACING
SELLER#1 • Tread engineered for unmatched forward bite
• Direct fit for 2nd Gen Slash®, Slayer®, SC10, & P-L Split Six wheels
• Molded outer sidewall dramatically reduces sidewall flex
• NEW! High performance/long lasting inserts for P-L Split Six and stock wheels
#1053-01 #1053-02(M2 Medium, pair) (M3 Soft, pair)
Mounted on Red/Black Split Six wheels:
Slash®: #1053-11 #1053-12 (M2 FRONT, pair) (M2 REAR, pair) #1053-21 #1053-22 (M3 FRONT, pair) (M3 REAR, pair)
SC10: #1053-31 #1053-32 (M2 FRONT, pair) (M2 REAR, pair) #1053-41 #1053-42 (M3 FRONT, pair) (M3 REAR, pair)
bow.tie sc
See National Champ Scott Hughesmount Bow-Tie SC tires on his SLASH® @ PROLINERACING.com
#3284-00 #3283-00 #3293-60
#2714-02 Black/Black#2714-03 Stainless/Black#2714-04 Red/Black
#2715-02 Black/Black#2715-03 Stainless/Black#2715-04 Red/Black
SLASH® Front 2.2”/3.0” SLASH® Rear 2.2”/3.0”
#2716-02 Black/Black#2716-04 Red/Black
#2717-02 Black/Black#2715-04 Red/Black
SC10 Front 2.2”/3.0” SC10 Rear 2.2”/3.0”
• No gluing required! 3-pieces engineered for easy install
• Six stainless steel screws = solid interloc durability
• Front 2.2” gives a realistic look and 3.0” Rear allows for suspension clearance
• Pre-Mounted Bead-locs available with red rings
2.2”/3.0” Tires• Direct fit for 2nd Gen Slash®, Slayer®,
SC10, & P-L Split Six wheels
• Internal ribbing provides extreme sidewall support
• Made from super-soft (M2) IFMAR World Champion compound
• NEW! High performance/long lasting inserts for P-L Split Six and stock wheels
#1078-01 (M2 Medium, pair)
Mounted on Red/Black Split Six wheels:
#1078-21 (M2 Slash® FRONT, pair)
#1078-22 (M2 Slash® REAR, pair)
#1078-11 (M2 Slayer® REAR, pair)
ALLTERRAIN
switch
DESERT RAT hardcore carnage
2.2”/3.0” Tires
HI-TORQUERACING
SELLER#1 • Tread engineered for unmatched forward bite
• Direct fit for 2nd Gen Slash®, Slayer®, SC10, & P-L Split Six wheels
• Molded outer sidewall dramatically reduces sidewall flex
• NEW! High performance/long lasting inserts for P-L Split Six and stock wheels
#1053-01 #1053-02(M2 Medium, pair) (M3 Soft, pair)
Mounted on Red/Black Split Six wheels:
Slash®: #1053-11 #1053-12 (M2 FRONT, pair) (M2 REAR, pair) #1053-21 #1053-22 (M3 FRONT, pair) (M3 REAR, pair)
SC10: #1053-31 #1053-32 (M2 FRONT, pair) (M2 REAR, pair) #1053-41 #1053-42 (M3 FRONT, pair) (M3 REAR, pair)
bow.tie sc
See National Champ Scott Hughesmount Bow-Tie SC tires on his SLASH® @ PROLINERACING.com
pre-glued 2.8” tires
2.8” tire line-up: unmounted
Mounted on Torque 2.8” Chrome Wheels
For JATO®#1136-11 (M2) FRONT#1136-12 (M2) REARFor Stampede® & Rustler®#1136-11 (M2) NITRO FRONT
#1136-12 (M2) NITRO REAR, ELECTRIC FRONT
#1136-13 (M2) ELECTRIC REAR
Dirt Hawg 2.8”
For JATO®#1137-11 (M2) FRONT#1137-12 (M2) REARFor Stampede® & Rustler®#1137-11 (M2) NITRO FRONT
#1137-12 (M2) NITRO REAR, ELECTRIC FRONT
#1137-13 (M2) ELECTRIC REAR
Road Rage 2.8”
• Durable chrome finish• Fits JATO®, Stampede® & Rustler®#2694-01 NITRO FRONT#2695-01 NITRO REAR, ELECTRIC FRONT#2708-01 ELECTRIC REAR
ESCAPE FROM STOCK...
Street
All-Terrain
Tires• Superior traction• Longer treadlife• Greater control
Wheels• Made from durable nylon material• One-piece/lightweight design
Bodies• Best detail & lexan clarity in the industry• Extra thick for all kinds of bashing
?
StreetRaceDirt All-Terrain
PROLINERACING.com
Badlands 2.8"#1143-00 (M2, pair)
fits 2.8” wheels
Bow-Tie 2.8"#1138-00 (M2, pair)
fits 2.8” wheels
Dirt Hawg 2.8"#1136-00 (M2, pair)
fits 2.8” wheels
Road Rage 2.8" #1137-00 (M2, pair)
fits 2.8” wheelsDid you know?....Pro-Line employees visit and support Casa Hogar Belen, an orphange
in Baja that cares daily for over 90 young children.
‘80 Chevy® K10#3229-00 (clear body) fits STAMPEDE®
Crowd Pleazer 2.0#3202-00 (clear body) fits JATO®
Torque 2.8” front & rear wheels for your® ®
Tire: Dirt Hawg 2.8”#1136-00 fits 2.8” Pro-Line wheels Also in Pre-Glued: See right
#3253-00 fits Rustler® Electric Body: Desert Rat
Torque 2.8” wheels
OFF-ROAD TRUCK
pre-glued 2.8” tires
2.8” tire line-up: unmounted
Mounted on Torque 2.8” Chrome Wheels
For JATO®#1136-11 (M2) FRONT#1136-12 (M2) REARFor Stampede® & Rustler®#1136-11 (M2) NITRO FRONT
#1136-12 (M2) NITRO REAR, ELECTRIC FRONT
#1136-13 (M2) ELECTRIC REAR
Dirt Hawg 2.8”
For JATO®#1137-11 (M2) FRONT#1137-12 (M2) REARFor Stampede® & Rustler®#1137-11 (M2) NITRO FRONT
#1137-12 (M2) NITRO REAR, ELECTRIC FRONT
#1137-13 (M2) ELECTRIC REAR
Road Rage 2.8”
• Durable chrome finish• Fits JATO®, Stampede® & Rustler®#2694-01 NITRO FRONT#2695-01 NITRO REAR, ELECTRIC FRONT#2708-01 ELECTRIC REAR
ESCAPE FROM STOCK...
Street
All-Terrain
Tires• Superior traction• Longer treadlife• Greater control
Wheels• Made from durable nylon material• One-piece/lightweight design
Bodies• Best detail & lexan clarity in the industry• Extra thick for all kinds of bashing
?
StreetRaceDirt All-Terrain
PROLINERACING.com
Badlands 2.8"#1143-00 (M2, pair)
fits 2.8” wheels
Bow-Tie 2.8"#1138-00 (M2, pair)
fits 2.8” wheels
Dirt Hawg 2.8"#1136-00 (M2, pair)
fits 2.8” wheels
Road Rage 2.8" #1137-00 (M2, pair)
fits 2.8” wheelsDid you know?....Pro-Line employees visit and support Casa Hogar Belen, an orphange
in Baja that cares daily for over 90 young children.
‘80 Chevy® K10#3229-00 (clear body) fits STAMPEDE®
Crowd Pleazer 2.0#3202-00 (clear body) fits JATO®
Torque 2.8” front & rear wheels for your® ®
Tire: Dirt Hawg 2.8”#1136-00 fits 2.8” Pro-Line wheels Also in Pre-Glued: See right
#3253-00 fits Rustler® Electric Body: Desert Rat
Torque 2.8” wheels
OFF-ROAD TRUCK
LEAVE STOCK IN THE DIRT...
Desperado Bead-Loc wheels (pair)
For 5B FRONT#2706-01 Black/Chrome#2706-03 Black/Black
For 5B REAR#2707-01 Black/Chrome#2707-03 Black/Black
Heavy-duty inner & outer bead-loc design, rings and hardwareincluded, for “Pro-Line 5B to 5T conversion” & 5B Rear
5B Tires & WheelsBow-Tie (pair)
#1151-00 (XTR) Tire/Insert#1151-13 (XTR) Mountedon Black Desperado rear wheels
Badlands (pair)
#1142-00 (XTR) Tire/Insert#1142-13 (XTR) Mountedon Black Desperado rear wheels
Excavator (pair)
#1148-00 (XTR) Tire/Insert#1148-13 (XTR) Mountedon Black Desperado rear wheels
Bow-Tie (pair)
#1150-00 (XTR) Tire/Insert#1150-13 (XTR) Mountedon Black Desperado front wheels
Check out all the latest 5B/5T wheels, tires, bodies & ALL-NEW PL CARBON Performance Parts @
HI-PERFORMANCE PARTS
TRENCHER TIRES for 5TMounted on Black Split Six wheels
COMING EARLY-SEPTEMBER!
SPLIT SIX WHEELS for 5TBlack/Chrome Black/Black#2718-01 (front, pair) #2719-01 (rear, pair)
#2718-03 (front, pair) #2719-03 (rear, pair)
#1154-13 (front, pair) #1155-13 (rear, pair)
5TH SCALE OFF-ROAD
PROLINERACING.com
CARBON
Undertray#3306-60 fits 5B Desert Rat
Desert Rat#3263-00Clear body fits HPI 5B buggy
Desert Rat Truck5B to 5T Conversion Kit #3270-80Clear body fits HPI 5B buggy
Trofeo#3301-80Clear body fits HPI 5T Truck
Volkswagen® Baja Bug#3238-01Clear body fits HPI 5T Truck
ALL-NEW!
Make your HPI 5B into an off-road truck! • Easy installation• Free body clips• Free front/rear body mounting system
Molded Chassis #6302-00Rear Arm Brace Set #6302-01Front Arm Brace Set #6302-02Rear Upper Plate Set #6302-03 Engine Mount Brace Set #6302-04
Gear Plate #6302-05 Chassis Plate #6302-06Front Upper Plate #6302-07Rear Brace #6302-08
for HPI 5B & 5T
by
LEAVE STOCK IN THE DIRT...
Desperado Bead-Loc wheels (pair)
For 5B FRONT#2706-01 Black/Chrome#2706-03 Black/Black
For 5B REAR#2707-01 Black/Chrome#2707-03 Black/Black
Heavy-duty inner & outer bead-loc design, rings and hardwareincluded, for “Pro-Line 5B to 5T conversion” & 5B Rear
5B Tires & WheelsBow-Tie (pair)
#1151-00 (XTR) Tire/Insert#1151-13 (XTR) Mountedon Black Desperado rear wheels
Badlands (pair)
#1142-00 (XTR) Tire/Insert#1142-13 (XTR) Mountedon Black Desperado rear wheels
Excavator (pair)
#1148-00 (XTR) Tire/Insert#1148-13 (XTR) Mountedon Black Desperado rear wheels
Bow-Tie (pair)
#1150-00 (XTR) Tire/Insert#1150-13 (XTR) Mountedon Black Desperado front wheels
Check out all the latest 5B/5T wheels, tires, bodies & ALL-NEW PL CARBON Performance Parts @
HI-PERFORMANCE PARTS
TRENCHER TIRES for 5TMounted on Black Split Six wheels
COMING EARLY-SEPTEMBER!
SPLIT SIX WHEELS for 5TBlack/Chrome Black/Black#2718-01 (front, pair) #2719-01 (rear, pair)
#2718-03 (front, pair) #2719-03 (rear, pair)
#1154-13 (front, pair) #1155-13 (rear, pair)
5TH SCALE OFF-ROAD
PROLINERACING.com
CARBON
Undertray#3306-60 fits 5B Desert Rat
Desert Rat#3263-00Clear body fits HPI 5B buggy
Desert Rat Truck5B to 5T Conversion Kit #3270-80Clear body fits HPI 5B buggy
Trofeo#3301-80Clear body fits HPI 5T Truck
Volkswagen® Baja Bug#3238-01Clear body fits HPI 5T Truck
ALL-NEW!
Make your HPI 5B into an off-road truck! • Easy installation• Free body clips• Free front/rear body mounting system
Molded Chassis #6302-00Rear Arm Brace Set #6302-01Front Arm Brace Set #6302-02Rear Upper Plate Set #6302-03 Engine Mount Brace Set #6302-04
Gear Plate #6302-05 Chassis Plate #6302-06Front Upper Plate #6302-07Rear Brace #6302-08
for HPI 5B & 5T
by
Mazdaspeed6 #1487-00; #1487-11 (light) fits 190mm TC
Mazda6 #1465-00; #1465-11 (light) fits 190mm TC#1466-00 fits 200mm TC
Mulsanne LMP #1501-00 fits 200mm on-road pan car chassis
Chevy® Corvette C6-R #1499-00 fits 200mm on-road pan car chassis Sophia GT
#1502-00 fits 200mm on-road pan car chassis
C-HD #1229-30 fits 1:10 oval chassis
O.R.T (Oval Racing Truck)#1227-21 fits 1:10 oval chassis
AMR-12#1611-21 fits 1:12 on-road chassis
P.O.Box 456 Beaumont, CA 92223 Ph: 951.849.9781 Fax: 951.922.9311
P905B - High Downforce#1500-21 fits 235mm on-road pan car chassis
P909 fits 1:8 on-road #1504-30 (light); #1504-40
TCC#1230-30 fits 1:10 oval and 200mm TC
Dodge Stratus 3.0#1476-01 fits 190mm TC#1477-00 fits 200mm TC
LTC-R (Rubber)#1505-25 (light); #1505-30 fits 190mm TC
DNA¹ #1486-00 fits 190mm TCDNA² #1488-00 fits 190mm TCDNA³ #1490-00 fits 200mm TC
R9-F (Foam) #1497-00 fits 190mm TCR9-R (Rubber) #1498-00; #1498-11 (light) fits 190mm TC
see our complete line atall tires & bodiesmade in the usa
Live Customer Support 1-800-899-RACE (7223)
All Pro-Line & PROTOform bodies are sold clear and are shown painted for advertising purposes only.Wheels, tires & bodies sold separately, unless otherwise noted. MAXX®, REVO®, SLASH®, SLAYER®, JATO®, STAMPEDE® & RUSTLER® are registered trademarks of TRAXXAS L.P., used with permission.
c a t a l o gproduct
1:5
off-
road
: p14
-15
1:8
truc
k: p4
-5
1:8 buggy: p2-3monster truck: p6-7
rock crawling: p8-9
short course & desert truck: p8-9
1:10 truck: p12-13