Pro Heat Carpet Cleaner Quick Start Guide
Transcript of Pro Heat Carpet Cleaner Quick Start Guide
-
8/3/2019 Pro Heat Carpet Cleaner Quick Start Guide
1/2
BISSELL is happy to be of service.Contact us directly at1-800-237-7691 or
visit the website for helpful instructions atwww.bissell.com
Quick StartGuide
PLEASE DO NOT RETURN THIS PRODUCT TO THE STORE
PLEASE KEEP FOR FUTURE REFERENCE
BISSELL Homecare, Inc.P.O. Box 1888Grand Rapids, MI 49501
2011 BISSELL Homecare, Inc.
1204357
F o r a d d i t i o n a l t i p s a n d t r o u b l e s h o o t i n g
P l e a s e r e f e r t o U s e r ' s G u i d eEarn BISSELL rewards! Register your product today!
Visit: www.bissell.com
a.
d.
e.
f.b.
g.
c.
Phillips head screw driver is needed for assembly
Package contents:
8920, 8930, 8960,
9200, 9300, 9400 SERIES
a. Machine Base & 2 tank system
b. Upper Handle
c. 4 Screws - taped to handle
d. Upper Hose Rack
e. Lower Hose Rack
f. Tool Attachment(s)(varies by model)
g. Formula(varies by model)
Carpet cleaning
Cleaning with attachments
1. While pressig the trigger, make oe slow orward wet pass ad aother oe back
2. Release the trigger ad make oe slow orward ad backward pass overthe same area. Repeated passes will help aid i dry time
3. Cotiue passes util cleaig area is complete
4. Whe the dirty water reaches the FULL lie o the tak, it is time to empty
5. Empty dirty water by removig tak rom base o machie. Carry to sikor outside to dispose o water. Ulatch top o tak ad pour dirty waterthrough triagle shaped opeig i corer
6. Rell as eeded, ollowig steps 4 & 5 uder "Beore you begi cleaig"
1. Set ReadyTools dial to the TOOLS settig
2. Attach the cleaig tool to the ed o the hose
3. Clea by pressig the trigger to spray solutio oto the area to be cleaed
4. Slowly scrub the tool back ad orth over the soiled surace
5. Tilt the tool orward to suctio liquid
6. Whe the dirty water reaches the FULL lie o the tak, ollow istructio#5 uder Carpet Cleaig to empty tak
7. Whe cleaig is complete, remove ad rise tool i warm water
5.
6.
WARNING:Refer to the enclosed user guide forcomplete instructions and importantsafety notices.
1.
Reer to the Users Guide or ull istructios o howto clea, store ad maitai your machie
-
8/3/2019 Pro Heat Carpet Cleaner Quick Start Guide
2/2
1. Slide upper hadle oto machie base
2. Screw 3 screws ito the marked holes
3. Place upper hose rack oto back o upper hadle, ad secure with screw
4. Place lower hose rack oto back o upper hadle by pushig i ad slidigdow util it saps rmly ito place
5. Wrap power cord ad fex hose6. Keep fex hose sugly i place by usig the hose secure latch
7. Attach tool to hose grip (extra tool storage o back)
1. Move uriture to aother area i cleaig a etire room
2. Remove large dirt ad debris rom carpet (See User's Guide or more details)
3. Pre-treat spots & stais ad heavy trac areas (optioal- see User's Guide)
4. Fill the clea water tak
4a. Ulatch the top by litig up o tak latch
4b. Remove the top4c. Fill the bladder with clea hot tap water
4d. Re-attach top by hookig the lip o the tak top ito the groove o thetak bottom ad secure the latch
5. Fill the ormula tak with water ad BISSELL 2X ormula
5a. Remove ormula tak ad uscrew the cap ad isert
5b. Fill with water to the WATER lie
5c. Fill with BISSELL 2X ormula to the FORMULA lie
5d. Replace cap ad isert ad place back ito ormula tak holder
6. Set Custom Clea Dial (located o the oot o the uit or o the upper hadle)
7. Set ReadyTools Dial ("FLOOR CLEAnInG or carpet cleaig or TOOLSor cleaig with the hose ad tool)
8. Plug ito outlet, ad tur the power ad heater (i desired) switch o
9. I usig the heater, let the machie warm up or 1 miute beore cleaig
Your assembly is
now complete.
a. Tough Stai Brush
4a.
4d.
6.
4b.
5a.
7.
4c.
5b.
8.
1.
4.
2.
6. 7.
3.
For complete user's guide, visit www.bissell.com
Assembly Before you begin cleaning
a
Power Heater