PRO DJ LINK Setup Guide · REMIX CDJ-2000nexus DJM-2000 CDJ-2000nexus Audio cable LAN cable (wired)...
Transcript of PRO DJ LINK Setup Guide · REMIX CDJ-2000nexus DJM-2000 CDJ-2000nexus Audio cable LAN cable (wired)...
PRO DJ LINKSetup Guide
2 En
ContentsHow to read this manualThe instructions in this manual use the indications below.! The names of channels and buttons indicated on the product, names of menus
in the software, etc., are indicated within square brackets ([ ]). (e.g. [MASTER] channel, [ON/OFF], [File] menu)
! The version of rekordbox for mobile devices is referred to as “rekordbox (iOS/Android) ”.
! The version of rekordbox for Mac/Windows is referred to as “rekordbox (Mac/Windows)”. “rekordbox” is used to indicate the versions of rekordbox and rekord-box (iOS/Android) simultaneously, as well as when referring to rekordbox func-tions directly.
Before startPurpose of this guide .......................................................................................................3General description of PRO DJ LINK ..............................................................................3To make connections .......................................................................................................3About trademarks and registered trademarks ..............................................................3
Connecting the CDJ-2000nexus and DJM-2000nexus/DJM-2000Connecting rekordbox by wireless LAN ..........................................................................4Connecting rekordbox by wired connection/Connecting a USB device or SD memory card .....................................................................................................................7
Connecting the CDJ-2000nexus and DJM-900nexusConnecting rekordbox by wireless LAN ........................................................................10Connecting rekordbox by wired connection/Connecting a USB device or SD memory card ...................................................................................................................13
Connecting the CDJ-2000nexus and another mixerConnecting rekordbox by wireless LAN ........................................................................16Connecting rekordbox by wired connection/Connecting a USB device or SD memory card ...................................................................................................................18
Connecting the CDJ-2000/CDJ-900 and DJM-2000nexus/DJM-2000Connecting rekordbox by wired connection/Connecting a USB device or SD memory card ...................................................................................................................20
Connecting the CDJ-2000/CDJ-900 and DJM-900nexusConnecting rekordbox by wired connection/Connecting a USB device or SD memory card ...................................................................................................................23
Connecting the CDJ-2000/CDJ-900 and another mixerConnecting rekordbox by wired connection/Connecting a USB device or SD memory card ...................................................................................................................26
3En
Before start
Before startPurpose of this guideThis guide describes the procedures for making the connections required to use the PRO DJ LINK functions.
General description of PRO DJ LINKThe various PRO DJ LINK functions provided by Pioneer can be achieved by connecting a PRO DJ LINK-compatible Pioneer DJ player (CDJ-2000nexus/CDJ-2000/CDJ-900), a DJ mixer (DJM-2000nexus/DJM-2000/DJM-900nexus), or a mobile device (iOS/Android) or computer (Mac/Windows) on which rekordbox is installed by wireless LAN or by LAN cable.The main functions that can be achieved by PRO DJ LINK are as follows:! Music files on a variety of mediums, such as smartphones or tablets12, computers2, USB devices or SD memory cards, can be sent by wireless signal1 or LAN/USB
cable and shared/played on up to four players3.! The [BEAT SYNC]1 function allows the music on up to four DJ players to be played with their tempos and beats synchronized.! The channel status (on air status and channel number) can be checked instantaneously.! The quantize function makes it possible to apply beat effects in tempo with the music.Even more functions are available when used in combination with other DJ players and DJ mixers supporting the PRO DJ LINK function. For details, see the respective play-ers’ or mixers’ operating instructions.1Only supported on the CDJ-2000nexus. 2rekordbox must be installed. 3Music files on CDs or DVDs cannot be shared.
To make maximum use of the PRO DJ LINK functionThe maximum advantages of the PRO DJ LINK function can be achieved by using music files that have been analyzed with rekordbox.Either connect a mobile device (iOS/Android) or computer (Mac/Windows) on which rekordbox is installed directly to the DJ player, or first transfer the music files that have been analyzed with rekordbox to an SD memory card.rekordbox can be downloaded free of charge from the following website:http://rekordbox.com/
Recommended rekordbox versionsrekordbox (iOS/Android) Ver.1.1.0 or greater, rekordbox (Mac/Windows) Ver.2.0.0 or greater! For details on connections and operations of a mobile device or computer on which rekordbox is installed, see the rekordbox (iOS/Android) user’s manual or the rekordbox
(Mac/Windows) operating instructions.
Models supporting PRO DJ LINKCDJ-2000nexus/CDJ-2000/CDJ-900DJM-2000nexus/DJM-2000/DJM-900nexus
To make connectionsThe connection procedure for using the PRO DJ LINK function differs according to the combination of devices you are using.This manual describes the connection procedures for different combinations of PRO DJ LINK-compatible Pioneer DJ players and DJ mixers.First check the combination of devices you are using on the table below, then connect following the description of the relevant page.
! Ex.: If you are using a CDJ-2000nexus and a DJM-2000nexus, you should follow procedure 1 . Proceed to page 1 .
Those using a DJM-2000nexus/DJM-2000 Those using a DJM-900nexusThose using a DJ mixer other than the DJM-2000nexus/DJM-2000/DJM-900nexus
Those using a CDJ-2000nexus 1 2 3
Those using a DJ player other than the CDJ-2000nexus 4 5 6
Connecting by wireless LAN! Use a wireless router (commercially available) and access point (commercially available) conforming to either IEEE802.11n or IEEE802.11g standards. Depending on the
signal conditions in the usage environment and the wireless router or access point, PRO DJ LINK connections may not operate properly. In this case, we recommend changing the wireless router’s settings. For instructions on setting the wireless router, see the wireless router’s operating instructions. If the problem persists after changing the wireless router’s settings, switch to wired connections.! For instructions on making the wireless LAN connections, see the operating instructions of your computer or wireless LAN device.
About trademarks and registered trademarks! Pioneer and rekordbox are registered trademarks of the Pioneer Corporation.! Microsoft®, Windows® 7, Windows Vista®, Windows® XP, and Windows® are either registered trademarks or trademarks of Microsoft Corporation in the United States and/
or other countries.! Mac and Mac OS a trademarks of Apple Inc. registered in the United States and other countries.! Android™ is a trademark of Google Inc.! IOS is a trademark or registered trademark of Cisco in the United States and other countries and is used under license.! The names of companies and products mentioned herein are the trademarks of their respective owners.
4 En
1 Connecting the CDJ-2000nexus and DJM-2000nexus/DJM-2000
1-1 Connecting rekordbox by wireless LAN
Equipment used! CDJ-2000nexus (1 – 4 units)! Wireless router with internal switching hub or access point! Mobile device (iOS/Android) or computer (Mac/Windows) on which rekordbox is installed! DJM-2000nexus or DJM-2000! Audio cable! LAN cables (one for each DJ player + one more)
Connections diagram (when connecting two DJ players)
OVER
POWER
CD/DIGITAL PHONO USB 1/2
TRIM
CHSELECT
EFFECT SELECT
EFFECT FREQUENCY
1 2 3 4
OFFON
MASTER
LINK
HEADPHONES
MIC
INST FX
MIDI
CURVE SETTING
10
7
4
2
1
0
- 1
- 2
- 3
- 5
- 7
- 10
- 15
- 24
dB
10
9
78
6
5
4
3
2
1
0
BALANCE
LOW
TIME
LIVESAMPLER
WAKE UP
LEVEL/DEPTH
1/8 1/4 1/2 3/4 1/1 2/1 4/1
MIN MAX
MIN MAX
AUTO/TAP
TAP
ON/OFF
ON/OFF
CUE
CUE
CUE
A B
DELAY
ECHO FILTER
GATEROLL TRANS
REVERB
MULTI TAPDELAY
PHASERSLIPROLL
SEND/RETURN
REVROLL
CUE
CUE
NOISE JET
ZIP HPF
CRUSH LPF
MONO
ON/OFF
CH EQ
EQ
CROSS FADER
CH FADER
ISOLATOR
START/STOP
SNAPSHOT
UTILITY
BOOTH MONITOR
STEREO
MONO SPLIT STEREO
L R
DJM-2000
- 0
L R
FILTER
PARAMETERMIN MAX
OVER
10
7
4
2
1
0
- 1
- 2
- 3
- 5
- 7
- 10
- 15
- 24
dB
ISOEQ/
EQ
LOW
MID
HI
+9
+6
- 0
0
LOW
MIN MAX
CUE MASTER
PHONES
LEVEL
MIXING
HI
-26/
+6-26/
+6-26/
-12 +12
OFF ON OVERTALK
PROFESSIONAL MIXER
10
9
78
6
5
4
3
2
1
0
A BTHRU A BTHRU
CROSS FADER ASSIGN
A BTHRU A BTHRU
CROSS FADER ASSIGN
MICLEVEL
0-
CUE
FILTER
MIN MAX
CUE
FILTER
MIN MAX
CUE
FILTER
MIN MAX
-12 +12
CD/DIGITAL LINE USB 3/4
OVER
10
7
4
2
1
0
- 1
- 2
- 3
- 5
- 7
- 10
- 15
- 24
dB
10
7
4
2
1
0
- 1
- 2
- 3
- 5
- 7
- 10
- 15
- 24
dB
ISOEQ/
ISOEQ/
TRIM
+9
HI
+6-26/
MID
+6-26/
LOW
+6-26/
CD/DIGITAL LINE USB 5/6
TRIM
+9
HI
+6-26/
MID
+6-26/
LOW
+6-26/
OVER
10
7
4
2
1
0
- 1
- 2
- 3
- 5
- 7
- 10
- 15
- 24
dB
ISOEQ/
CD/DIGITAL PHONO USB 7/8
TRIM
+9
HI
+6-26/
MID
+6-26/
LOW
+6-26/
OVER
MIC A B M
MID
MIN MAX
HI
MIN MAX
MIDI
MIX
REMIX
CDJ-2000nexus DJM-2000 CDJ-2000nexus
Audio cable
LAN cable (wired)
Wireless
Connection procedure
� Creating the [PLAYER No.] setting
1 Check that no mobile devices, USB devices or SD memory cards are connected to the DJ players, then turn on the power of the DJ players and the DJ mixer before connecting the LAN cables.! The [PLAYER No.] setting cannot be changed if a mobile device, USB device or SD memory card is connected or if a link is established.
2 Press the DJ player’s [MENU/UTILITY] button for over 1 second to open the UTILITY screen, then set [PLAYER No.] to [AUTO].[PLAYER No.] setting screen
! Set the second DJ player on in the same way.! [PLAYER No.] is set to [AUTO] upon shipment from the factory.
5En
Connecting
the CD
J-2000nexus and
DJ
M-2000nexus/D
JM
-2000
� Connecting the cables (LAN cable and audio cables)
Connect the LAN cable and audio cables.Connect in such a way that the DJ player’s [PLAYER No.], the channel number of the DJ mixer’s LAN cable insertion port and the channel number of the terminals to which the audio cables are connected are all the same number.Connect the wireless router/access point to [COMPUTER1] or [COMPUTER2].Ex.: When player 2 is connected to [CH2], player 3 is connected to [CH3] and the wireless router is connected to [COMPUTER1]
CH 2CH 3CH 4 CH 1SIGNAL GND
CD
CDL
R
L
R
PHONO
MIDI OUT USB
CDLINE
CONTROLOUT IN
(TRS)
R L
R L
R
L
R L(MONO) R L(MONO)
DIGITAL
BOOTH SEND RETURNCOMPUTER 1
LINK
CH 3 CH 1
CH 4 CH 2
CH 2CH 3CH 4 CH 1
DIGITAL
SIGNAL GND
CD
1GND
-6dB -3dB 0dB
2HOT
3COLD
CDL
R
PHONO
POWER
AC IN
OFFON
MASTER1
MASTERATT.
MASTER2 REC OUT
DIGITAL CD DIGITAL
L
R
CDLINE
CONTROLCD DIGITAL
DJM-2000
RR
CONTROL
O)
COMPUTER 1
LINK
CH 3 CH 1
CH 4 CH 2
CD DIGITAL
POWERCONTROL
POWERCONTROL
CDJ-2000nexusCDJ-2000nexus
Checking the connections
� Checking the DJ player’s link established by LAN connection
Check that the player number indicated on the DJ player’s screen is lit in white.LINK NGLINK OK
! If the player number indicated on the DJ player’s screen is lit in gray, the link is not established. If there is a DJ player for which the player number is lit in gray, redo the connection procedure.
! Set the second DJ player on in the same way.
� Checking that the LAN cable and audio cables are synchronized
Load a music file, then operate the DJ players that are connected by link to play and pause the track repeatedly.Check that the player number displayed on the DJ player’s screen is the same as the channel number that lights on the DJ mixer’s channel level indicator.If the numbers are different, fix the connections.
TRIM
OVER
10
7
4
2
1
0
- 1
- 2
- 3
- 5
- 7
- 10
- 15
- 24
dB
ISOEQ/
LOW
MID
HI
+9
+6-26/
+6-26/
OVER
10
7
4
2
1
0
- 1
- 2
- 3
- 5
- 7
- 10
- 15
- 24
dB
ISOEQ/
TRIM
+9
HI
+6-26/
MID
+6-26/
LOW
DJM-2000CDJ-2000nexus
! Set the second DJ player on in the same way.
6 En
� Checking the device(s) connected by wireless connection
1 Press the [rekordbox] button.
DISC
SD
USB
LINK
rekordbox BROWSE TAG LIST INFO MENU
BACKTAG TRACK / REMOVE
QUANTIZE TIME MODE
AUTO CUE
LINK INFO UTILITY
2 Tap the [LOAD] icon, or click the [LINK] button to establish the link connection.The devices that have been recognized are indicated on the DJ player’s screen.
rekordbox (iOS/Android) rekordbox (Mac/Windows)
3 Press the DJ player’s rotary selector to authorize the connection.The files, folders and lists loaded into the respective devices are displayed on the DJ player’s screen.
Ex.: When connecting a mobile device (iOS/Android) and a computer (Mac/Windows)
The connection completed screen appears.
rekordbox (iOS/Android) rekordbox (Mac/Windows)
This completes checking the connections.
7En
Connecting
the CD
J-2000nexus and
DJ
M-2000nexus/D
JM
-2000
1-2 Connecting rekordbox by wired connection/Connecting a USB device or SD memory card
Equipment used! CDJ-2000nexus (1 – 4 units)! USB cable (for the iPod cable, use the iPod cable included with the CDJ-2000nexus.)! Mobile device (iOS/Android) or computer (Mac/Windows) on which rekordbox is installed! USB device or SD memory card on which music files analyzed with rekordbox are stored! DJM-2000nexus or DJM-2000! Audio cable! LAN cables (one for each DJ player + one more)
Connections diagram (when connecting two DJ players)
OVER
POWER
CD/DIGITAL PHONO USB 1/2
TRIM
CHSELECT
EFFECT SELECT
EFFECT FREQUENCY
1 2 3 4
OFFON
MASTER
LINK
HEADPHONES
MIC
INST FX
MIDI
CURVE SETTING
10
7
4
2
1
0
- 1
- 2
- 3
- 5
- 7
- 10
- 15
- 24
dB
10
9
78
6
5
4
3
2
1
0
BALANCE
LOW
TIME
LIVESAMPLER
WAKE UP
LEVEL/DEPTH
1/8 1/4 1/2 3/4 1/1 2/1 4/1
MIN MAX
MIN MAX
AUTO/TAP
TAP
ON/OFF
ON/OFF
CUE
CUE
CUE
A B
DELAY
ECHO FILTER
GATEROLL TRANS
REVERB
MULTI TAPDELAY
PHASERSLIPROLL
SEND/RETURN
REVROLL
CUE
CUE
NOISE JET
ZIP HPF
CRUSH LPF
MONO
ON/OFF
CH EQ
EQ
CROSS FADER
CH FADER
ISOLATOR
START/STOP
SNAPSHOT
UTILITY
BOOTH MONITOR
STEREO
MONO SPLIT STEREO
L R
DJM-2000
- 0
L R
FILTER
PARAMETERMIN MAX
OVER
10
7
4
2
1
0
- 1
- 2
- 3
- 5
- 7
- 10
- 15
- 24
dB
ISOEQ/
EQ
LOW
MID
HI
+9
+6
- 0
0
LOW
MIN MAX
CUE MASTER
PHONES
LEVEL
MIXING
HI
-26/
+6-26/
+6-26/
-12 +12
OFF ON OVERTALK
PROFESSIONAL MIXER
10
9
78
6
5
4
3
2
1
0
A BTHRU A BTHRU
CROSS FADER ASSIGN
A BTHRU A BTHRU
CROSS FADER ASSIGN
MICLEVEL
0-
CUE
FILTER
MIN MAX
CUE
FILTER
MIN MAX
CUE
FILTER
MIN MAX
-12 +12
CD/DIGITAL LINE USB 3/4
OVER
10
7
4
2
1
0
- 1
- 2
- 3
- 5
- 7
- 10
- 15
- 24
dB
10
7
4
2
1
0
- 1
- 2
- 3
- 5
- 7
- 10
- 15
- 24
dB
ISOEQ/
ISOEQ/
TRIM
+9
HI
+6-26/
MID
+6-26/
LOW
+6-26/
CD/DIGITAL LINE USB 5/6
TRIM
+9
HI
+6-26/
MID
+6-26/
LOW
+6-26/
OVER
10
7
4
2
1
0
- 1
- 2
- 3
- 5
- 7
- 10
- 15
- 24
dB
ISOEQ/
CD/DIGITAL PHONO USB 7/8
TRIM
+9
HI
+6-26/
MID
+6-26/
LOW
+6-26/
OVER
MIC A B M
MID
MIN MAX
HI
MIN MAX
MIDI
MIX
REMIX
DJM-2000 CDJ-2000nexusCDJ-2000nexus
Audio cable
LAN cable (wired)
USB connections
Connection procedure
� Creating the [PLAYER No.] setting
1 Check that no mobile devices, USB devices or SD memory cards are connected to the DJ players, then turn on the power of the DJ players and the DJ mixer before connecting the LAN cables.! The [PLAYER No.] setting cannot be changed if a mobile device, USB device or SD memory card is connected or if a link is established.
2 Press the DJ player’s [MENU/UTILITY] button for over 1 second to open the UTILITY screen, then set [PLAYER No.] to [AUTO].[PLAYER No.] setting screen
! Set the second DJ player on in the same way.! [PLAYER No.] is set to [AUTO] upon shipment from the factory.
8 En
� Connecting the cables (LAN cable and audio cables)
Connect the LAN cable and audio cables.Connect in such a way that the DJ player’s [PLAYER No.], the channel number of the DJ mixer’s LAN cable insertion port and the channel number of the terminals to which the audio cables are connected are all the same number.Connect the computer to [COMPUTER1] or [COMPUTER2].Ex.: When player 2 is connected to [CH2], player 3 is connected to [CH3] and the computer (Mac/Windows) is connected to [COMPUTER1]
CH 2CH 3CH 4 CH 1SIGNAL GND
CD
CDL
R
L
R
PHONO
MIDI OUT USB
CDLINE
CONTROLOUT IN
(TRS)
R L
R L
R
L
R L(MONO) R L(MONO)
DIGITAL
BOOTH SEND RETURNCOMPUTER 1
LINK
CH 3 CH 1
CH 4 CH 2
CH 2CH 3CH 4 CH 1
DIGITAL
SIGNAL GND
CD
1GND
-6dB -3dB 0dB
2HOT
3COLD
CDL
R
PHONO
POWER
AC IN
OFFON
MASTER1
MASTERATT.
MASTER2 REC OUT
DIGITAL CD DIGITAL
L
R
CDLINE
CONTROLCD DIGITAL
DJM-2000
RR
CONTROL
O)
COMPUTER 1
LINK
CH 3 CH 1
CH 4 CH 2
CD DIGITAL
POWERCONTROL
POWERCONTROL
CDJ-2000nexusCDJ-2000nexus
Checking the connections
� Checking the DJ player’s link established by LAN connection
Check that the player number indicated on the DJ player’s screen is lit in white.LINK NGLINK OK
! If the player number indicated on the DJ player’s screen is lit in gray, the link is not established. If there is a DJ player for which the player number is lit in gray, redo the connection procedure.
! Set the second DJ player on in the same way.
� Checking that the LAN cable and audio cables are synchronized
Load a music file, then operate the DJ players that are connected by link to play and pause the track repeatedly.Check that the player number displayed on the DJ player’s screen is the same as the channel number that lights on the DJ mixer’s channel level indicator.If the numbers are different, fix the connections.
TRIM
OVER
10
7
4
2
1
0
- 1
- 2
- 3
- 5
- 7
- 10
- 15
- 24
dB
ISOEQ/
LOW
MID
HI
+9
+6-26/
+6-26/
OVER
10
7
4
2
1
0
- 1
- 2
- 3
- 5
- 7
- 10
- 15
- 24
dB
ISOEQ/
TRIM
+9
HI
+6-26/
MID
+6-26/
LOW
DJM-2000CDJ-2000nexus
! Set the second DJ player on in the same way.
9En
Connecting
the CD
J-2000nexus and
DJ
M-2000nexus/D
JM
-2000
� Checking the connected device(s)
1 Press one of the medium select buttons to check the connection with the respective device.— To use a computer (Mac/Windows) connected by wired LAN: Press the [rekordbox] button.— To use a USB device or SD memory card connected to another player that is connected by link: Press the [LINK] button.— To use a mobile device (iOS/Android) or USB device connected by wire to the USB "A terminal": Press the [USB] button.— To use an SD memory card: Press the [SD] button.
! The following describes examples for when the [rekordbox] button is pressed and when the [USB] button is pressed.
2 Press the [rekordbox] button.
DISC
SD
USB
LINK
rekordbox BROWSE TAG LIST INFO MENU
BACKTAG TRACK / REMOVE
QUANTIZE TIME MODE
AUTO CUE
LINK INFO UTILITY
! To use a mobile device (iOS/Android) connected by wire: Press the [USB] button.
3 Tap the [LOAD] icon, or click the [LINK] button to establish the link connection.
rekordbox (iOS/Android) rekordbox (Mac/Windows)
The devices that have been recognized are indicated on the DJ player’s screen.
Ex.: When connecting a computer (Mac/Windows)
The connection completed screen appears.
rekordbox (iOS/Android) rekordbox (Mac/Windows)
This completes checking the connections.
10 En
2 Connecting the CDJ-2000nexus and DJM-900nexus
2-1 Connecting rekordbox by wireless LAN
Equipment used! CDJ-2000nexus (1 – 4 units)! Wireless router with internal switching hub! Mobile device (iOS/Android) or computer (Mac/Windows) on which rekordbox is installed! DJM-900nexus! Audio cable! LAN cables (one for each DJ player + one more)
Connections diagram (when connecting two DJ players)
LEVEL
USBDIGITALCD/ LINE PHONO
1/ 2
HI
MIC 1
MIC 2
HI
LOW
EQEQ/
12 12
12 12
0
0
ONTALKOVEROFF
SPACE
NOISE
CUE
CUE
CUE
CRUSH FILTER
DUBECHO
GATE/COMP
1 2 3 4
BA THRU
TRIM
9
6-26 /MID
6-26 /LOW
6-26 /
COLOR
ISO
OVER
10
10
9
8
7
6
5
4
3
2
1
7
4
2
1
- 1
- 2
- 3
- 5
- 7
-10
-15
-24
dB
0
HILOW
TRIM
USBDIGITALCD/ LINE PHONO
7/ 8
HI
EQ/
CUE
BA THRU
9
6-26 /MID
6-26 /LOW
6-26 /
COLOR
ISO
OVER
10
7
4
2
1
- 1
- 2
- 3
- 5
- 7
-10
-15
-24
dB
0
HILOW
CUE
TRIM
USBDIGITALCD/ LINE LINE
3 /4
HI
EQ/
CUE
BA THRU
9
6-26 /MID
6-26 /LOW
6-26 /
COLOR
ISO
OVER
10
10
9
8
7
6
5
4
3
2
1
7
4
2
1
- 1
- 2
- 3
- 5
- 7
-10
-15
-24
dB
0
HILOW
TRIM
USBDIGITALCD/ LINE LINE
5 / 6
HI
EQ/
CUE
BA THRU
MONO STEREO
9
6-26 /MID
6-26 /LOW
6-26 /
COLOR
ISO
OVER
10
10
9
8
7
6
5
4
3
2
1
0 0 0
7
4
2
1
- 1
- 2
- 3
- 5
- 7
-10
-15
-24
dB dB RL
0
OVER
10
7
4
2
1
- 1
- 2
- 3
- 5
- 7
-10
-15
-24
0
HILOW
EQISOLATOR
A B
CROSS FADER ASSIGN
LEVEL
POWER
BALANCE
0
AUTO GRIDTAP
AUTO/ TAP
BPM
%ms
CH SELECT
START/ STOP
RL
WAKE UP
PARAMETER
1 2 3 4MIC MSTA B
TIME
MAX
LEVEL / DEPTH
ON/ OFF
MIN
MIC MASTER MIDI
BEAT EFFECTS
BEAT
TAP
LINK
SOUND COLOR FX
HEADPHONES
FADER START
STEREO
MASTER
0
MIXING
LEVEL
BOOTH MONITOR
EQ CURVE
CH FADER
CROSS FADER
PHONES
CUE
MONO SPLIT
USB
MIC1
QUAN-TIZE
MASTER
CF.B
CF.AMIC4
3
2
1
0
ON/ OFF LFO FORM
UTILITY
X- PAD
ROBOT
REVERB
PHASER
SLIP ROLL
ROLL
FLANGERFILTER
REV ROLL
SND/ RTN
MELODICTRANS
ECHO
SPIRAL
MIDI LFODELAY
CDJ-2000nexus DJM-900nexus CDJ-2000nexus
Audio cable
LAN cable (wired)
Wireless
Connection procedure
� Creating the [PLAYER No.] setting
1 Check that no mobile devices, USB devices or SD memory cards are connected to the DJ players, then turn on the power of the DJ players and the DJ mixer before connecting the LAN cables.! The [PLAYER No.] setting cannot be changed if a mobile device, USB device or SD memory card is connected or if a link is established.
2 Press the DJ player’s [MENU/UTILITY] button for over 1 second to open the UTILITY screen, then set the number to be specified for [PLAYER No.] (a number from 1 to 4).
[PLAYER No.] setting screen (ex.: when set to [PLAYER 2])
! Set the second DJ player on in the same way.! [PLAYER No.] is set to [AUTO] upon shipment from the factory.! Set so that no two players have the same player number. If they do, [PLAYER No.] flashes continuously.
11En
Connecting
the CD
J-2000nexus and
DJ
M-900nexus
� Connecting the cables (LAN cable and audio cables)
1 Connect the wireless router and DJM-900nexus by LAN cable.
2 Connect the LAN cable and audio cables.Connect in such a way that the DJ player’s player number and the channel number of the terminals to which the DJ mixer’s audio cables are connected are the same number.Ex.: When player 2 is connected to [CH2], player 3 is connected to [CH3] and the wireless router is connected to the DJ mixer
DJM-900nexus
OFFRETURN
L
L
L
1 GND 2 HOT3 COLD
L
R
LL
IN
CH3CH4
CH1CH2R
R
R
R
L
R
R
PHONOCH 4 CH 3
CD/LINEL
R
PHONOCH 1
CD/LINE
SIGNAL GND SIGNAL GND
TRS
CD/LINELINE
MASTER1 MASTER2 REC OUT BOOTH
MIC2 MIDI OUT
DIGITAL
MASTEROUT
LINK
L
R
CH 2CD/LINELINE
(MONO)
LR (MONO)
SEND
POWER
AC IN
ON
L L LR
L
R
CH 3
GND SIGN
TRS
CD/LINELINE
MASTER2 REC OUT BOOTH
L
R
CH 2CD/LINELINE
POWERCONTROL
CDJ-2000nexus
POWERCONTROL
CDJ-2000nexus
LR
L RL R
LR
Checking the connections
� Checking the DJ player’s link established by LAN connection
Check that the player number indicated on the DJ player’s screen is lit in white.LINK NGLINK OK
! If the player number indicated on the DJ player’s screen is lit in gray, the link is not established. If there is a DJ player for which the player number is lit in gray, redo the connection procedure.
! Set the second DJ player on in the same way.
� Checking that the LAN cable and audio cables are synchronized
Load a music file, then operate the DJ players that are connected by link to play and pause the track repeatedly.Check that the player number displayed on the DJ player’s screen is the same as the channel number that lights on the DJ mixer’s channel level indicator.If the numbers are different, fix the connections.
DJM-900nexus
HI
EQ/
TRIM
9
6-26 /MID
6-26 /LOW
ISO
OVER
10
7
4
2
1
- 1
- 2
- 3
- 5
- 7
-10
-15
-24
0
TRIM
HI
EQ/
9
6-26 /MID
6-26 /LOW
ISO
OVER
10
7
4
2
1
- 1
- 2
- 3
- 5
- 7
-10
-15
-24
0
CDJ-2000nexus
! Set the second DJ player on in the same way.
12 En
� Checking the device(s) connected by wireless connection
1 Press the [rekordbox] button.
DISC
SD
USB
LINK
rekordbox BROWSE TAG LIST INFO MENU
BACKTAG TRACK / REMOVE
QUANTIZE TIME MODE
AUTO CUE
LINK INFO UTILITY
2 Tap the [LOAD] icon, or click the [LINK] button to establish the link connection.The devices that have been recognized are indicated on the DJ player’s screen.
rekordbox (iOS/Android) rekordbox (Mac/Windows)
3 Press the DJ player’s rotary selector to authorize the connection.The files, folders and lists loaded into the respective devices are displayed on the DJ player’s screen.
Ex.: When connecting a mobile device (iOS/Android) and a computer (Mac/Windows)
The connection completed screen appears.
rekordbox (iOS/Android) rekordbox (Mac/Windows)
This completes checking the connections.
13En
Connecting
the CD
J-2000nexus and
DJ
M-900nexus
2-2 Connecting rekordbox by wired connection/Connecting a USB device or SD memory card
Equipment used! CDJ-2000nexus (1 – 4 units)! Switching hub! USB cable (for the iPod cable, use the iPod cable included with the CDJ-2000nexus.)! Mobile device (iOS/Android) or computer (Mac/Windows) on which rekordbox is installed! USB device or SD memory card on which music files analyzed with rekordbox are stored! DJM-900nexus! Audio cable! LAN cables (one for each DJ player + two more)
Connections diagram (when connecting two DJ players)
LEVEL
USBDIGITALCD/ LINE PHONO
1/ 2
HI
MIC 1
MIC 2
HI
LOW
EQEQ/
12 12
12 12
0
0
ONTALKOVEROFF
SPACE
NOISE
CUE
CUE
CUE
CRUSH FILTER
DUBECHO
GATE/COMP
1 2 3 4
BA THRU
TRIM
9
6-26 /MID
6-26 /LOW
6-26 /
COLOR
ISO
OVER
10
10
9
8
7
6
5
4
3
2
1
7
4
2
1
- 1
- 2
- 3
- 5
- 7
-10
-15
-24
dB
0
HILOW
TRIM
USBDIGITALCD/ LINE PHONO
7/ 8
HI
EQ/
CUE
BA THRU
9
6-26 /MID
6-26 /LOW
6-26 /
COLOR
ISO
OVER
10
7
4
2
1
- 1
- 2
- 3
- 5
- 7
-10
-15
-24
dB
0
HILOW
CUE
TRIM
USBDIGITALCD/ LINE LINE
3 /4
HI
EQ/
CUE
BA THRU
9
6-26 /MID
6-26 /LOW
6-26 /
COLOR
ISO
OVER
10
10
9
8
7
6
5
4
3
2
1
7
4
2
1
- 1
- 2
- 3
- 5
- 7
-10
-15
-24
dB
0
HILOW
TRIM
USBDIGITALCD/ LINE LINE
5 / 6
HI
EQ/
CUE
BA THRU
MONO STEREO
9
6-26 /MID
6-26 /LOW
6-26 /
COLOR
ISO
OVER
10
10
9
8
7
6
5
4
3
2
1
0 0 0
7
4
2
1
- 1
- 2
- 3
- 5
- 7
-10
-15
-24
dB dB RL
0
OVER
10
7
4
2
1
- 1
- 2
- 3
- 5
- 7
-10
-15
-24
0
HILOW
EQISOLATOR
A B
CROSS FADER ASSIGN
LEVEL
POWER
BALANCE
0
AUTO GRIDTAP
AUTO/ TAP
BPM
%ms
CH SELECT
START/ STOP
RL
WAKE UP
PARAMETER
1 2 3 4MIC MSTA B
TIME
MAX
LEVEL / DEPTH
ON/ OFF
MIN
MIC MASTER MIDI
BEAT EFFECTS
BEAT
TAP
LINK
SOUND COLOR FX
HEADPHONES
FADER START
STEREO
MASTER
0
MIXING
LEVEL
BOOTH MONITOR
EQ CURVE
CH FADER
CROSS FADER
PHONES
CUE
MONO SPLIT
USB
MIC1
QUAN-TIZE
MASTER
CF.B
CF.AMIC4
3
2
1
0
ON/ OFF LFO FORM
UTILITY
X- PAD
ROBOT
REVERB
PHASER
SLIP ROLL
ROLL
FLANGERFILTER
REV ROLL
SND/ RTN
MELODICTRANS
ECHO
SPIRAL
MIDI LFODELAY
CDJ-2000nexus DJM-900nexus CDJ-2000nexus
Audio cable
LAN cable (wired)
USB connections
Connection procedure
� Creating the [PLAYER No.] setting
1 Check that no mobile devices, USB devices or SD memory cards are connected to the DJ players, then turn on the power of the DJ players and the DJ mixer before connecting the LAN cables.! The [PLAYER No.] setting cannot be changed if a mobile device, USB device or SD memory card is connected or if a link is established.
2 Press the DJ player’s [MENU/UTILITY] button for over 1 second to open the UTILITY screen, then set the number to be specified for [PLAYER No.] (a number from 1 to 4).
[PLAYER No.] setting screen (ex.: when set to [PLAYER 2])
! Set the second DJ player on in the same way.! [PLAYER No.] is set to [AUTO] upon shipment from the factory.! Set so that no two players have the same player number. If they do, [PLAYER No.] flashes continuously.
14 En
� Connecting the cables (LAN cable and audio cables)
1 Connect the switching hub and DJM-900nexus by LAN cable.
2 Connect the LAN cable and audio cables.Connect in such a way that the DJ player’s player number and the channel number of the terminals to which the DJ mixer’s audio cables are connected are the same number.Ex.: When player 2 is connected to [CH2], player 3 is connected to [CH3] and the switching hub is connected to the DJ mixer
DJM-900nexus
OFFRETURN
L
L
L
1 GND 2 HOT3 COLD
L
R
LL
IN
CH3CH4
CH1CH2R
R
R
R
L
R
R
PHONOCH 4 CH 3
CD/LINEL
R
PHONOCH 1
CD/LINE
SIGNAL GND SIGNAL GND
TRS
CD/LINELINE
MASTER1 MASTER2 REC OUT BOOTH
MIC2 MIDI OUT
DIGITAL
MASTEROUT
LINK
L
R
CH 2CD/LINELINE
(MONO)
LR (MONO)
SEND
POWER
AC IN
ON
L L LR
L
R
CH 3
GND SIGN
TRS
CD/LINELINE
MASTER2 REC OUT BOOTH
L
R
CH 2CD/LINELINE
POWERCONTROL
CDJ-2000nexus
POWERCONTROL
CDJ-2000nexus
LR
L RL R
LR
Checking the connections
� Checking the DJ player’s link established by LAN connection
Check that the player number indicated on the DJ player’s screen is lit in white.LINK NGLINK OK
! If the player number indicated on the DJ player’s screen is lit in gray, the link is not established. If there is a DJ player for which the player number is lit in gray, redo the connection procedure.
! Set the second DJ player on in the same way.
� Checking that the LAN cable and audio cables are synchronized
Load a music file, then operate the DJ players that are connected by link to play and pause the track repeatedly.Check that the player number displayed on the DJ player’s screen is the same as the channel number that lights on the DJ mixer’s channel level indicator.If the numbers are different, fix the connections.
DJM-900nexus
HI
EQ/
TRIM
9
6-26 /MID
6-26 /LOW
ISO
OVER
10
7
4
2
1
- 1
- 2
- 3
- 5
- 7
-10
-15
-24
0
TRIM
HI
EQ/
9
6-26 /MID
6-26 /LOW
ISO
OVER
10
7
4
2
1
- 1
- 2
- 3
- 5
- 7
-10
-15
-24
0
CDJ-2000nexus
! Set the second DJ player on in the same way.
15En
Connecting
the CD
J-2000nexus and
DJ
M-900nexus
� Checking the connected device(s)
1 Press one of the medium select buttons to check the connection with the respective device.— To use a computer (Mac/Windows) connected by wired LAN: Press the [rekordbox] button.— To use a USB device or SD memory card connected to another player that is connected by link: Press the [LINK] button.— To use a mobile device (iOS/Android) or USB device connected by wire to the USB "A terminal": Press the [USB] button.— To use an SD memory card: Press the [SD] button.
! The following describes examples for when the [rekordbox] button is pressed and when the [USB] button is pressed.
2 Press the [rekordbox] button.
DISC
SD
USB
LINK
rekordbox BROWSE TAG LIST INFO MENU
BACKTAG TRACK / REMOVE
QUANTIZE TIME MODE
AUTO CUE
LINK INFO UTILITY
! To use a mobile device (iOS/Android) connected by wire: Press the [USB] button.
3 Tap the [LOAD] icon, or click the [LINK] button to establish the link connection.
rekordbox (iOS/Android) rekordbox (Mac/Windows)
The devices that have been recognized are indicated on the DJ player’s screen.
Ex.: When connecting a computer (Mac/Windows)
The connection completed screen appears.
rekordbox (iOS/Android) rekordbox (Mac/Windows)
This completes checking the connections.
16 En
3 Connecting the CDJ-2000nexus and another mixer
3-1 Connecting rekordbox by wireless LAN
Equipment used! CDJ-2000nexus (1 – 4 units)! Wireless router with internal switching hub! Mobile device (iOS/Android) or computer (Mac/Windows) on which rekordbox is installed! Another DJ mixer (DJ mixer other than the DJM-2000nexus/DJM-2000/DJM-900nexus)! Audio cable! LAN cables (one for each DJ player)
Connections diagram (when connecting two DJ players)
Audio cable
LAN cable (wired)
Wireless
CDJ-2000nexus CDJ-2000nexus
LEVEL
MIC 1
MIC 2
EQ
0
0
POWER
MIC USB
MIC1
AUTO/ TAP
START/ STOP
CH SELECT
PARAMETER
1 2 3 4
MIC A B MST
TIME
MAX
LEVEL / DEPTH
ON/ OFF
MIN
MIDI
BEAT EFFECTS
BEAT
TAP
ON/ OFF UTILITY
PHASER
SPIRAL
FLANGER
SLIP ROLL
ROLL
FILTERTRANS
REV ROLL
SND/ RTN
ROBOTREVERB
ECHO
PITCH ECHO
DELAY
HI
LOW
12 12
12 12
ONTALKOVEROFF
SOUND COLOR FX
NOISE CUTTER
CRUSH FILTER
1 2 3 4
FADER START
HEAD PHONESSTEREOMONO SPLIT
MASTER
0
MIXING
LEVELCUE
PHONES
CD/LINE PHONO USB1/2
EQ/
TRIM
9
HI
6-26 /MID
6-26 /LOW
6-26 /
ISO
OVER
10
7
4
2
1
- 1
- 2
- 3
- 5
- 7
-10
-15
-24
dB
0
BEAT
COLOR
HILOW
CUE
BA THRU
10
9
8
7
6
5
4
3
2
1
0
CD/LINE LINE USB3/4
EQ/
TRIM
9
HI
6-26 /MID
6-26 /LOW
6-26 /
ISO
OVER
10
7
4
2
1
- 1
- 2
- 3
- 5
- 7
-10
-15
-24
dB
0
BEAT
COLOR
HILOW
CUE
BA THRU
10
9
8
7
6
5
4
3
2
1
0
CD/LINE LINE USB5/6
EQ/
TRIM
9
HI
6-26 /MID
6-26 /LOW
6-26 /
ISO
OVER
10
7
4
2
1
- 1
- 2
- 3
- 5
- 7
-10
-15
-24
dB
0
OVER
10
7
4
2
1
- 1
- 2
- 3
- 5
- 7
-10
-15
-24
RL dB
0
BEAT
COLOR
HILOW
CUE
BA THRU
10
9
8
7
6
5
4
3
2
1
0
CD/LINE PHONO USB7/8
EQ/
TRIM
9
HI
6-26 /MID
6-26 /LOW
6-26 /
ISO
OVER
10
7
4
2
1
- 1
- 2
- 3
- 5
- 7
-10
-15
-24
dB
0
BEAT
COLOR
HILOW
CUE CUE
CUE
BA THRU
STEREO
EQ
MONO
BA
ISOLATOR
WAKE UP
LEVEL
0
BALANCE
RL
MASTER
BOOTH MONITOR
EQ CURVE
CH FADER
CROSS FADER
0
AUTOTAP BPM
%ms
1
2
34 MIC
CF.A
CF.B
MASTER
CROSS FADER ASSIGN
DJ mixer other than theDJM-2000nexus/DJM-2000/DJM-900nexus
Connection procedure
� Creating the [PLAYER No.] setting
1 Check that no mobile devices, USB devices or SD memory cards are connected to the DJ players, then turn on the power of the DJ players and the DJ mixer before connecting the LAN cables.! The [PLAYER No.] setting cannot be changed if a mobile device, USB device or SD memory card is connected or if a link is established.
2 Press the DJ player’s [MENU/UTILITY] button for over 1 second to open the UTILITY screen, then set [PLAYER No.] to [AUTO].[PLAYER No.] setting screen
! Set the second DJ player on in the same way.! [PLAYER No.] is set to [AUTO] upon shipment from the factory.
� Connecting the cables (LAN cable and audio cables)
For details on connections, see the operating instructions for the respective devices. Connect the LAN cables and audio cables referring to the connections diagrams.
17En
Connecting
the CD
J-2000nexus and
another mixer
Checking the connections
� Checking the DJ player’s link established by LAN connection
Check that the player number indicated on the DJ player’s screen is lit in white.LINK NGLINK OK
! If the player number indicated on the DJ player’s screen is lit in gray, the link is not established. If there is a DJ player for which the player number is lit in gray, redo the connection procedure.
! Set the second DJ player on in the same way.
� Checking the device(s) connected by wireless connection
1 Press the [rekordbox] button.
DISC
SD
USB
LINK
rekordbox BROWSE TAG LIST INFO MENU
BACKTAG TRACK / REMOVE
QUANTIZE TIME MODE
AUTO CUE
LINK INFO UTILITY
2 Tap the [LOAD] icon, or click the [LINK] button to establish the link connection.The devices that have been recognized are indicated on the DJ player’s screen.
rekordbox (iOS/Android) rekordbox (Mac/Windows)
3 Press the DJ player’s rotary selector to authorize the connection.The files, folders and lists loaded into the respective devices are displayed on the DJ player’s screen.
Ex.: When connecting a mobile device (iOS/Android) and a computer (Mac/Windows)
The connection completed screen appears.
rekordbox (iOS/Android) rekordbox (Mac/Windows)
This completes checking the connections.
18 En
3-2 Connecting rekordbox by wired connection/Connecting a USB device or SD memory card
Equipment used! CDJ-2000nexus (1 – 4 units)! Switching hub! USB cable (for the iPod cable, use the iPod cable included with the CDJ-2000nexus.)! Mobile device (iOS/Android) or computer (Mac/Windows) on which rekordbox is installed! USB device or SD memory card on which music files analyzed with rekordbox are stored! Another DJ mixer (DJ mixer other than the DJM-2000nexus/DJM-2000/DJM-900nexus)! Audio cable! LAN cables (one for each DJ player + one more)
Connections diagram (when connecting two DJ players)
LEVEL
MIC 1
MIC 2
EQ
0
0
POWER
MIC USB
MIC1
AUTO/ TAP
START/ STOP
CH SELECT
PARAMETER
1 2 3 4
MIC A B MST
TIME
MAX
LEVEL / DEPTH
ON/ OFF
MIN
MIDI
BEAT EFFECTS
BEAT
TAP
ON/ OFF UTILITY
PHASER
SPIRAL
FLANGER
SLIP ROLL
ROLL
FILTERTRANS
REV ROLL
SND/ RTN
ROBOTREVERB
ECHO
PITCH ECHO
DELAY
HI
LOW
12 12
12 12
ONTALKOVEROFF
SOUND COLOR FX
NOISE CUTTER
CRUSH FILTER
1 2 3 4
FADER START
HEAD PHONESSTEREOMONO SPLIT
MASTER
0
MIXING
LEVELCUE
PHONES
CD/LINE PHONO USB1/2
EQ/
TRIM
9
HI
6-26 /MID
6-26 /LOW
6-26 /
ISO
OVER
10
7
4
2
1
- 1
- 2
- 3
- 5
- 7
-10
-15
-24
dB
0
BEAT
COLOR
HILOW
CUE
BA THRU
10
9
8
7
6
5
4
3
2
1
0
CD/LINE LINE USB3/4
EQ/
TRIM
9
HI
6-26 /MID
6-26 /LOW
6-26 /
ISO
OVER
10
7
4
2
1
- 1
- 2
- 3
- 5
- 7
-10
-15
-24
dB
0
BEAT
COLOR
HILOW
CUE
BA THRU
10
9
8
7
6
5
4
3
2
1
0
CD/LINE LINE USB5/6
EQ/
TRIM
9
HI
6-26 /MID
6-26 /LOW
6-26 /
ISO
OVER
10
7
4
2
1
- 1
- 2
- 3
- 5
- 7
-10
-15
-24
dB
0
OVER
10
7
4
2
1
- 1
- 2
- 3
- 5
- 7
-10
-15
-24
RL dB
0
BEAT
COLOR
HILOW
CUE
BA THRU
10
9
8
7
6
5
4
3
2
1
0
CD/LINE PHONO USB7/8
EQ/
TRIM
9
HI
6-26 /MID
6-26 /LOW
6-26 /
ISO
OVER
10
7
4
2
1
- 1
- 2
- 3
- 5
- 7
-10
-15
-24
dB
0
BEAT
COLOR
HILOW
CUE CUE
CUE
BA THRU
STEREO
EQ
MONO
BA
ISOLATOR
WAKE UP
LEVEL
0
BALANCE
RL
MASTER
BOOTH MONITOR
EQ CURVE
CH FADER
CROSS FADER
0
AUTOTAP BPM
%ms
1
2
34 MIC
CF.A
CF.B
MASTER
CROSS FADER ASSIGN
CDJ-2000nexus CDJ-2000nexus
Audio cable
LAN cable (wired)
USB connections
DJ mixer other than theDJM-2000nexus/DJM-2000/DJM-900nexus
Connection procedure
� Creating the [PLAYER No.] setting
1 Check that no mobile devices, USB devices or SD memory cards are connected to the DJ players, then turn on the power of the DJ players and the DJ mixer before connecting the LAN cables.! The [PLAYER No.] setting cannot be changed if a mobile device, USB device or SD memory card is connected or if a link is established.
2 Press the DJ player’s [MENU/UTILITY] button for over 1 second to open the UTILITY screen, then set [PLAYER No.] to [AUTO].[PLAYER No.] setting screen
! Set the second DJ player on in the same way.! [PLAYER No.] is set to [AUTO] upon shipment from the factory.
� Connecting the cables (LAN cable and audio cables)
For details on connections, see the operating instructions for the respective devices. Connect the LAN cables and audio cables referring to the connections diagrams.
19En
Connecting
the CD
J-2000nexus and
another mixer
Checking the connections
� Checking the DJ player’s link established by LAN connection
Check that the player number indicated on the DJ player’s screen is lit in white.LINK NGLINK OK
! If the player number indicated on the DJ player’s screen is lit in gray, the link is not established. If there is a DJ player for which the player number is lit in gray, redo the connection procedure.
! Set the second DJ player on in the same way.
� Checking the connected device(s)
1 Press one of the medium select buttons to check the connection with the respective device.— To use a computer (Mac/Windows) connected by wired LAN: Press the [rekordbox] button.— To use a USB device or SD memory card connected to another player that is connected by link: Press the [LINK] button.— To use a mobile device (iOS/Android) or USB device connected by wire to the USB "A terminal": Press the [USB] button.— To use an SD memory card: Press the [SD] button.
! The following describes examples for when the [rekordbox] button is pressed and when the [USB] button is pressed.
2 Press the [rekordbox] button.
DISC
SD
USB
LINK
rekordbox BROWSE TAG LIST INFO MENU
BACKTAG TRACK / REMOVE
QUANTIZE TIME MODE
AUTO CUE
LINK INFO UTILITY
! To use a mobile device (iOS/Android) connected by wire: Press the [USB] button.
3 Tap the [LOAD] icon, or click the [LINK] button to establish the link connection.
rekordbox (iOS/Android) rekordbox (Mac/Windows)
The devices that have been recognized are indicated on the DJ player’s screen.
Ex.: When connecting a computer (Mac/Windows)
The connection completed screen appears.
rekordbox (iOS/Android) rekordbox (Mac/Windows)
This completes checking the connections.
4 Connecting the CDJ-2000/CDJ-900 and DJM-2000nexus/DJM-2000Connecting rekordbox by wired connection/Connecting a USB device or SD memory card
Equipment used! CDJ-2000 (1 – 4 units) or CDJ-900 (1 – 4 units)! Computer (Mac/Windows) on which rekordbox is installed! USB device or SD memory card on which music files analyzed with rekordbox are stored! DJM-2000nexus or DJM-2000! Audio cable! LAN cables (one for each DJ player + one more)
Connections diagram (when connecting two DJ players)
Audio cable
LAN cable (wired)PLAY / PAUSE
CUE
SEARCH
TRACK SEARCH
FWD
REV
DIRECTION
USBSTOP
LINK
USB
SD
DISC
BROWSE TAG LIST INFO MENU
UTILITY
REV FWD
TEMPORESET
MASTERTEMPO
TEMPO6 WIDE10 16
VINYL JOGMODECDJ
RELEASE / START
TOUCH / BRAKE
VINYLSPEED ADJUST
LIGHT HEAVY
JOG ADJUST
CUE/LOOP DELETE MEMORY
UNLOCK
OFFON
LOCK
POWER
DISC EJECT
STANDBY
BACK / REMOVETAG TRACK
TIMEMODE
AUTOCUE
OUT RELOOP/EXIT
LOOP
NEEDLE SEARCH
CALL
IN ADJUST OUT ADJUST
LOOP CUTTER
4-BEAT LOOP
IN / CUE
REC / CALL
SD
HOT CUE
TEMPO
0
MULTI PLAYER CDJ-2000
CDJ-2000
PLAY / PAUSE
CUE
SEARCH
TRACK SEARCH
FWD
REV
DIRECTION
USBSTOP
LINK
USB
SD
DISC
BROWSE TAG LIST INFO MENU
UTILITY
REV FWD
TEMPORESET
MASTERTEMPO
TEMPO6 WIDE10 16
VINYL JOGMODECDJ
RELEASE / START
TOUCH / BRAKE
VINYLSPEED ADJUST
LIGHT HEAVY
JOG ADJUST
CUE/LOOP DELETE MEMORY
UNLOCK
OFFON
LOCK
POWER
DISC EJECT
STANDBY
BACK / REMOVETAG TRACK
TIMEMODE
AUTOCUE
OUT RELOOP/EXIT
LOOP
NEEDLE SEARCH
CALL
IN ADJUST OUT ADJUST
LOOP CUTTER
4-BEAT LOOP
IN / CUE
REC / CALL
SD
HOT CUE
TEMPO
0
MULTI PLAYER CDJ-2000
CDJ-2000
OVER
POWER
CD/DIGITAL PHONO USB 1/2
TRIM
CHSELECT
EFFECT SELECT
EFFECT FREQUENCY
1 2 3 4
OFFON
MASTER
LINK
HEADPHONES
MIC
INST FX
MIDI
CURVE SETTING
10
7
4
2
1
0
- 1
- 2
- 3
- 5
- 7
- 10
- 15
- 24
dB
10
9
78
6
5
4
3
2
1
0
BALANCE
LOW
TIME
LIVESAMPLER
WAKE UP
LEVEL/DEPTH
1/8 1/4 1/2 3/4 1/1 2/1 4/1
MIN MAX
MIN MAX
AUTO/TAP
TAP
ON/OFF
ON/OFF
CUE
CUE
CUE
A B
DELAY
ECHO FILTER
GATEROLL TRANS
REVERB
MULTI TAPDELAY
PHASERSLIPROLL
SEND/RETURN
REVROLL
CUE
CUE
NOISE JET
ZIP HPF
CRUSH LPF
MONO
ON/OFF
CH EQ
EQ
CROSS FADER
CH FADER
ISOLATOR
START/STOP
SNAPSHOT
UTILITY
BOOTH MONITOR
STEREO
MONO SPLIT STEREO
L R
DJM-2000
- 0
L R
FILTER
PARAMETERMIN MAX
OVER
10
7
4
2
1
0
- 1
- 2
- 3
- 5
- 7
- 10
- 15
- 24
dB
ISOEQ/
EQ
LOW
MID
HI
+9
+6
- 0
0
LOW
MIN MAX
CUE MASTER
PHONES
LEVEL
MIXING
HI
-26/
+6-26/
+6-26/
-12 +12
OFF ON OVERTALK
PROFESSIONAL MIXER
10
9
78
6
5
4
3
2
1
0
A BTHRU A BTHRU
CROSS FADER ASSIGN
A BTHRU A BTHRU
CROSS FADER ASSIGN
MICLEVEL
0-
CUE
FILTER
MIN MAX
CUE
FILTER
MIN MAX
CUE
FILTER
MIN MAX
-12 +12
CD/DIGITAL LINE USB 3/4
OVER
10
7
4
2
1
0
- 1
- 2
- 3
- 5
- 7
- 10
- 15
- 24
dB
10
7
4
2
1
0
- 1
- 2
- 3
- 5
- 7
- 10
- 15
- 24
dB
ISOEQ/
ISOEQ/
TRIM
+9
HI
+6-26/
MID
+6-26/
LOW
+6-26/
CD/DIGITAL LINE USB 5/6
TRIM
+9
HI
+6-26/
MID
+6-26/
LOW
+6-26/
OVER
10
7
4
2
1
0
- 1
- 2
- 3
- 5
- 7
- 10
- 15
- 24
dB
ISOEQ/
CD/DIGITAL PHONO USB 7/8
TRIM
+9
HI
+6-26/
MID
+6-26/
LOW
+6-26/
OVER
MIC A B M
MID
MIN MAX
HI
MIN MAX
MIDI
MIX
REMIX
DJM-2000
Connection procedure
� Creating the [PLAYER No.] setting
1 Check that no USB devices or SD memory cards are connected to the DJ player(s), then turn on the power of the DJ player(s) and the DJ mixer(s) before connecting the LAN cables.! The [PLAYER No.] setting cannot be changed if a USB device or SD memory card is connected or if a link is established.
2 Press the DJ player’s [MENU/UTILITY] button for over 1 second to open the UTILITY screen, then set [PLAYER No.] to [AUTO].[PLAYER No.] setting screen
! Set the second DJ player on in the same way.! [PLAYER No.] is set to [AUTO] upon shipment from the factory.
20 En
21En
Connecting
the CD
J-2000/C
DJ
-900 and D
JM
-2000nexus/DJ
M-2000
� Connecting the cables (LAN cable and audio cables)
Connect the LAN cable and audio cables.Connect in such a way that the channel number of the DJ mixer’s LAN cable insertion port and the channel number of the terminals to which the audio cables are connected are the same number.Connect the computer to [COMPUTER1] or [COMPUTER2].Ex.: When player 2 is connected to [CH2], player 3 is connected to [CH3] and the computer (Mac/Windows) is connected to [COMPUTER1]
CH 2CH 3CH 4 CH 1SIGNAL GND
CD
CDL
R
L
R
PHONO
MIDI OUT USB
CDLINE
CONTROLOUT IN
(TRS)
R L
R L
R
L
R L(MONO) R L(MONO)
DIGITAL
BOOTH SEND RETURNCOMPUTER 1
LINK
CH 3 CH 1
CH 4 CH 2
CH 2CH 3CH 4 CH 1
DIGITAL
SIGNAL GND
CD
1GND
-6dB -3dB 0dB
2HOT
3COLD
CDL
R
PHONO
POWER
AC IN
OFFON
MASTER1
MASTERATT.
MASTER2 REC OUT
DIGITAL CD DIGITAL
L
R
CDLINE
CONTROLCD DIGITAL
DJM-2000
RR
CONTROL
O)
COMPUTER 1
LINK
CH 3 CH 1
CH 4 CH 2
CD DIGITAL
AUDIO OUTR L
CONTROL
LINK USB
DIGITALOUT
POWER
AUDIO OUTR L
CONTROL
LINK USB
DIGITALOUT
POWER
CDJ-2000CDJ-2000
Checking the connections
� Checking the DJ player’s link established by LAN connection (for the CDJ-2000)
Check that the player number indicated on the DJ player’s screen is lit in white.LINK NGLINK OK
! If the player number indicated on the DJ player’s screen is lit in gray, the link is not established. If there is a DJ player for which the player number is lit in gray, redo the connection procedure.
! Set the second DJ player on in the same way.
� Checking the DJ player’s link established by LAN connection (for the CDJ-900)
Press the DJ player’s [MENU/UTILITY] button for over 1 second to open the UTILITY screen, then check that [CONNECTED] is displayed for [LINK STATUS].
UTILITY2NOT CONNECTEDON–
PLAYER No.LINK STATUSAUTO STANDBYMIDI CHANNEL
LINK NG
UTILITY2CONNECTEDON–
PLAYER No.LINK STATUSAUTO STANDBYMIDI CHANNEL
LINK OK
! If [NOT CONNECTED] is displayed, the link is not established. If there is a DJ player for which [NOT CONNECTED] is displayed, redo the connection procedure.! Set the second DJ player on in the same way.
� Checking that the LAN cable and audio cables are synchronized
Load a music file, then operate the DJ players that are connected by link to play and pause the track repeatedly.Check that the player number displayed on the DJ player’s screen is the same as the channel number that lights on the DJ mixer’s channel level indicator.If the numbers are different, fix the connections.
CD/DIGITAL PHONO USB 1/2
TRIM
FILTER
OVER
10
7
4
2
1
0
- 1
- 2
- 3
- 5
- 7
- 10
- 15
- 24
dB
ISOEQ/
LOW
MID
HI
+9
+6-26/
+6-26/
+6-26/
FILTER
CD/DIGITAL LINE USB 3/4
OVER
10
7
4
2
1
0
- 1
- 2
- 3
- 5
- 7
- 10
- 15
- 24
dB
ISOEQ/
TRIM
+9
HI
+6-26/
MID
+6-26/
LOW
+6-26/
DJM-2000CDJ-900
CDJ-2000
! Set the second DJ player on in the same way.
� Checking the connected device(s)
1 Press one of the medium select buttons to check the connection with the respective device.— To use a computer (Mac/Windows) connected by wired LAN: Press the [LINK] button.— To use a USB device or SD memory card connected to another player that is connected by link: Press the [LINK] button.— To use a USB device connected by wire to the USB "A terminal": Press the [USB] button.— To use an SD memory card: Press the [SD] button.
! The following describes an example for when using a computer (Mac/Windows) connected by wired LAN (for when the [LINK] button is pressed).
2 Press the [LINK] button.
LINK
USB
SD
DISC
BROWSE TAG LIST INFO MENU
UTILITY BACK / REMOVETAG TRACK
TIMEMODE
AUTOCUE
3 Click the [LINK] button to connect.
rekordbox (Mac/Windows)
The files, folders and lists loaded into the respective devices are displayed on the DJ player’s screen.
Ex.: When connecting a computer (Mac/Windows)
rekordbox (Mac/Windows)
55.481 mm
This completes checking the connections.
22 En
23En
5 Connecting the CDJ-2000/CDJ-900 and DJM-900nexusConnecting rekordbox by wired connection/Connecting a USB device or SD memory card
Equipment used! CDJ-2000 (1 – 4 units) or CDJ-900 (1 – 4 units)! Switching hub! Computer (Mac/Windows) on which rekordbox is installed! USB device or SD memory card on which music files analyzed with rekordbox are stored! DJM-900nexus! Audio cable! LAN cables (one for each DJ player + two more)
Connections diagram (when connecting two DJ players)
PLAY / PAUSE
CUE
SEARCH
TRACK SEARCH
FWD
REV
DIRECTION
USBSTOP
LINK
USB
SD
DISC
BROWSE TAG LIST INFO MENU
UTILITY
REV FWD
TEMPORESET
MASTERTEMPO
TEMPO6 WIDE10 16
VINYL JOGMODECDJ
RELEASE / START
TOUCH / BRAKE
VINYLSPEED ADJUST
LIGHT HEAVY
JOG ADJUST
CUE/LOOP DELETE MEMORY
UNLOCK
OFFON
LOCK
POWER
DISC EJECT
STANDBY
BACK / REMOVETAG TRACK
TIMEMODE
AUTOCUE
OUT RELOOP/EXIT
LOOP
NEEDLE SEARCH
CALL
IN ADJUST OUT ADJUST
LOOP CUTTER
4-BEAT LOOP
IN / CUE
REC / CALL
SD
HOT CUE
TEMPO
0
MULTI PLAYER CDJ-2000
CDJ-2000
PLAY / PAUSE
CUE
SEARCH
TRACK SEARCH
FWD
REV
DIRECTION
USBSTOP
LINK
USB
SD
DISC
BROWSE TAG LIST INFO MENU
UTILITY
REV FWD
TEMPORESET
MASTERTEMPO
TEMPO6 WIDE10 16
VINYL JOGMODECDJ
RELEASE / START
TOUCH / BRAKE
VINYLSPEED ADJUST
LIGHT HEAVY
JOG ADJUST
CUE/LOOP DELETE MEMORY
UNLOCK
OFFON
LOCK
POWER
DISC EJECT
STANDBY
BACK / REMOVETAG TRACK
TIMEMODE
AUTOCUE
OUT RELOOP/EXIT
LOOP
NEEDLE SEARCH
CALL
IN ADJUST OUT ADJUST
LOOP CUTTER
4-BEAT LOOP
IN / CUE
REC / CALL
SD
HOT CUE
TEMPO
0
MULTI PLAYER CDJ-2000
CDJ-2000
LEVEL
USBDIGITALCD/ LINE PHONO
1/ 2
HI
MIC 1
MIC 2
HI
LOW
EQEQ/
12 12
12 12
0
0
ONTALKOVEROFF
SPACE
NOISE
CUE
CUE
CUE
CRUSH FILTER
DUBECHO
GATE/COMP
1 2 3 4
BA THRU
TRIM
9
6-26 /MID
6-26 /LOW
6-26 /
COLOR
ISO
OVER
10
10
9
8
7
6
5
4
3
2
1
7
4
2
1
- 1
- 2
- 3
- 5
- 7
-10
-15
-24
dB
0
HILOW
TRIM
USBDIGITALCD/ LINE PHONO
7/ 8
HI
EQ/
CUE
BA THRU
9
6-26 /MID
6-26 /LOW
6-26 /
COLOR
ISO
OVER
10
7
4
2
1
- 1
- 2
- 3
- 5
- 7
-10
-15
-24
dB
0
HILOW
CUE
TRIM
USBDIGITALCD/ LINE LINE
3 /4
HI
EQ/
CUE
BA THRU
9
6-26 /MID
6-26 /LOW
6-26 /
COLOR
ISO
OVER
10
10
9
8
7
6
5
4
3
2
1
7
4
2
1
- 1
- 2
- 3
- 5
- 7
-10
-15
-24
dB
0
HILOW
TRIM
USBDIGITALCD/ LINE LINE
5 / 6
HI
EQ/
CUE
BA THRU
MONO STEREO
9
6-26 /MID
6-26 /LOW
6-26 /
COLOR
ISO
OVER
10
10
9
8
7
6
5
4
3
2
1
0 0 0
7
4
2
1
- 1
- 2
- 3
- 5
- 7
-10
-15
-24
dB dB RL
0
OVER
10
7
4
2
1
- 1
- 2
- 3
- 5
- 7
-10
-15
-24
0
HILOW
EQISOLATOR
A B
CROSS FADER ASSIGN
LEVEL
POWER
BALANCE
0
AUTO GRIDTAP
AUTO/ TAP
BPM
%ms
CH SELECT
START/ STOP
RL
WAKE UP
PARAMETER
1 2 3 4MIC MSTA B
TIME
MAX
LEVEL / DEPTH
ON/ OFF
MIN
MIC MASTER MIDI
BEAT EFFECTS
BEAT
TAP
LINK
SOUND COLOR FX
HEADPHONES
FADER START
STEREO
MASTER
0
MIXING
LEVEL
BOOTH MONITOR
EQ CURVE
CH FADER
CROSS FADER
PHONES
CUE
MONO SPLIT
USB
MIC1
QUAN-TIZE
MASTER
CF.B
CF.AMIC4
3
2
1
0
ON/ OFF LFO FORM
UTILITY
X- PAD
ROBOT
REVERB
PHASER
SLIP ROLL
ROLL
FLANGERFILTER
REV ROLL
SND/ RTN
MELODICTRANS
ECHO
SPIRAL
MIDI LFODELAY
DJM-900nexus
Audio cable
LAN cable (wired)
Connection procedure
� Creating the [PLAYER No.] setting
1 Check that no USB devices or SD memory cards are connected to the DJ player(s), then turn on the power of the DJ player(s) and the DJ mixer(s) before connecting the LAN cables.! The [PLAYER No.] setting cannot be changed if a USB device or SD memory card is connected or if a link is established.
2 Press the DJ player’s [MENU/UTILITY] button for over 1 second to open the UTILITY screen, then set the number to be specified for [PLAYER No.] (a number from 1 to 4).
[PLAYER No.] setting screen (ex.: when set to [PLAYER 2])
! Set the second DJ player on in the same way.! [PLAYER No.] is set to [AUTO] upon shipment from the factory.! Set so that no two players have the same player number. If they do, [PLAYER No.] flashes continuously.
Connecting
the CD
J-2000/C
DJ
-900 and D
JM
-900nexus
� Connecting the cables (LAN cable and audio cables)
1 Connect the switching hub and DJM-900nexus by LAN cable.
2 Connect the LAN cable and audio cables.Connect in such a way that the DJ player’s player number and the channel number of the terminals to which the DJ mixer’s audio cables are connected are the same number.Ex.: When player 2 is connected to [CH2], player 3 is connected to [CH3] and the computer (Mac/Windows) is connected to the DJ mixer
DJM-900nexus
OFFRETURN
L
L
L
1 GND 2 HOT3 COLD
L
R
LL
IN
CH3CH4
CH1CH2R
R
R
R
L
R
R
PHONOCH 4 CH 3
CD/LINEL
R
PHONOCH 1
CD/LINE
SIGNAL GND SIGNAL GND
TRS
CD/LINELINE
MASTER1 MASTER2 REC OUT BOOTH
MIC2 MIDI OUT
DIGITAL
MASTEROUT
LINK
L
R
CH 2CD/LINELINE
(MONO)
LR (MONO)
SEND
POWER
AC IN
ON
L L LR
L
R
CH 3
GND SIGN
TRS
CD/LINELINE
MASTER2 REC OUT BOOTH
L
R
CH 2CD/LINELINE
AUDIO OUTR L
CONTROL
LINK USB
DIGITALOUT
POWER
AUDIO OUTR L
CONTROL
LINK USB
DIGITALOUT
POWER
CDJ-2000CDJ-2000
L R
LR
L R
LR
Checking the connections
� Checking the DJ player’s link established by LAN connection (for the CDJ-2000)
Check that the player number indicated on the DJ player’s screen is lit in white.LINK NGLINK OK
! If the player number indicated on the DJ player’s screen is lit in gray, the link is not established. If there is a DJ player for which the player number is lit in gray, redo the connection procedure.
! Set the second DJ player on in the same way.
� Checking the DJ player’s link established by LAN connection (for the CDJ-900)
Press the DJ player’s [MENU/UTILITY] button for over 1 second to open the UTILITY screen, then check that [CONNECTED] is displayed for [LINK STATUS].
UTILITY2NOT CONNECTEDON–
PLAYER No.LINK STATUSAUTO STANDBYMIDI CHANNEL
LINK NG
UTILITY2CONNECTEDON–
PLAYER No.LINK STATUSAUTO STANDBYMIDI CHANNEL
LINK OK
! If [NOT CONNECTED] is displayed, the link is not established. If there is a DJ player for which [NOT CONNECTED] is displayed, redo the connection procedure.! Set the second DJ player on in the same way.
� Checking that the LAN cable and audio cables are synchronized
Load a music file, then operate the DJ players that are connected by link to play and pause the track repeatedly.Check that the player number displayed on the DJ player’s screen is the same as the channel number that lights on the DJ mixer’s channel level indicator.If the numbers are different, fix the connections.
CD/DIGITAL PHONO USB 1/2
TRIM
FILTER
OVER
10
7
4
2
1
0
- 1
- 2
- 3
- 5
- 7
- 10
- 15
- 24
dB
ISOEQ/
LOW
MID
HI
+9
+6-26/
+6-26/
+6-26/
FILTER
CD/DIGITAL LINE USB 3/4
OVER
10
7
4
2
1
0
- 1
- 2
- 3
- 5
- 7
- 10
- 15
- 24
dB
ISOEQ/
TRIM
+9
HI
+6-26/
MID
+6-26/
LOW
+6-26/
DJM-2000CDJ-900
CDJ-2000
24 En
25En
Connecting
the CD
J-2000/C
DJ
-900 and D
JM
-900nexus
� Checking the connected device(s)
1 Press one of the medium select buttons to check the connection with the respective device.— To use a computer (Mac/Windows) connected by wired LAN: Press the [LINK] button.— To use a USB device or SD memory card connected to another player that is connected by link: Press the [LINK] button.— To use a USB device connected by wire to the USB "A terminal": Press the [USB] button.— To use an SD memory card: Press the [SD] button.
! The following describes an example for when using a computer (Mac/Windows) connected by wired LAN (for when the [LINK] button is pressed).
2 Press the [LINK] button.
LINK
USB
SD
DISC
BROWSE TAG LIST INFO MENU
UTILITY BACK / REMOVETAG TRACK
TIMEMODE
AUTOCUE
3 Click the [LINK] button to connect.
rekordbox (Mac/Windows)
The files, folders and lists loaded into the respective devices are displayed on the DJ player’s screen.
Ex.: When connecting a computer (Mac/Windows)
rekordbox (Mac/Windows)
55.481 mm
This completes checking the connections.
6 Connecting the CDJ-2000/CDJ-900 and another mixerConnecting rekordbox by wired connection/Connecting a USB device or SD memory card
Equipment used! CDJ-2000 (1 – 4 units) or CDJ-900 (1 – 4 units)! Switching hub! Computer (Mac/Windows) on which rekordbox is installed! USB device or SD memory card on which music files analyzed with rekordbox are stored! Another DJ mixer (DJ mixer other than the DJM-2000nexus/DJM-2000/DJM-900nexus)! Audio cable! LAN cables (one for each DJ player + one more)
Connections diagram (when connecting two DJ players)
Audio cable
LAN cable (wired)PLAY / PAUSE
CUE
SEARCH
TRACK SEARCH
FWD
REV
DIRECTION
USBSTOP
LINK
USB
SD
DISC
BROWSE TAG LIST INFO MENU
UTILITY
REV FWD
TEMPORESET
MASTERTEMPO
TEMPO6 WIDE10 16
VINYL JOGMODECDJ
RELEASE / START
TOUCH / BRAKE
VINYLSPEED ADJUST
LIGHT HEAVY
JOG ADJUST
CUE/LOOP DELETE MEMORY
UNLOCK
OFFON
LOCK
POWER
DISC EJECT
STANDBY
BACK / REMOVETAG TRACK
TIMEMODE
AUTOCUE
OUT RELOOP/EXIT
LOOP
NEEDLE SEARCH
CALL
IN ADJUST OUT ADJUST
LOOP CUTTER
4-BEAT LOOP
IN / CUE
REC / CALL
SD
HOT CUE
TEMPO
0
MULTI PLAYER CDJ-2000
CDJ-2000
PLAY / PAUSE
CUE
SEARCH
TRACK SEARCH
FWD
REV
DIRECTION
USBSTOP
LINK
USB
SD
DISC
BROWSE TAG LIST INFO MENU
UTILITY
REV FWD
TEMPORESET
MASTERTEMPO
TEMPO6 WIDE10 16
VINYL JOGMODECDJ
RELEASE / START
TOUCH / BRAKE
VINYLSPEED ADJUST
LIGHT HEAVY
JOG ADJUST
CUE/LOOP DELETE MEMORY
UNLOCK
OFFON
LOCK
POWER
DISC EJECT
STANDBY
BACK / REMOVETAG TRACK
TIMEMODE
AUTOCUE
OUT RELOOP/EXIT
LOOP
NEEDLE SEARCH
CALL
IN ADJUST OUT ADJUST
LOOP CUTTER
4-BEAT LOOP
IN / CUE
REC / CALL
SD
HOT CUE
TEMPO
0
MULTI PLAYER CDJ-2000
CDJ-2000
LEVEL
MIC 1
MIC 2
EQ
0
0
POWER
MIC USB
MIC1
AUTO/ TAP
START/ STOP
CH SELECT
PARAMETER
1 2 3 4
MIC A B MST
TIME
MAX
LEVEL / DEPTH
ON/ OFF
MIN
MIDI
BEAT EFFECTS
BEAT
TAP
ON/ OFF UTILITY
PHASER
SPIRAL
FLANGER
SLIP ROLL
ROLL
FILTERTRANS
REV ROLL
SND/ RTN
ROBOTREVERB
ECHO
PITCH ECHO
DELAY
HI
LOW
12 12
12 12
ONTALKOVEROFF
SOUND COLOR FX
NOISE CUTTER
CRUSH FILTER
1 2 3 4
FADER START
HEAD PHONESSTEREOMONO SPLIT
MASTER
0
MIXING
LEVELCUE
PHONES
CD/LINE PHONO USB1/2
EQ/
TRIM
9
HI
6-26 /MID
6-26 /LOW
6-26 /
ISO
OVER
10
7
4
2
1
- 1
- 2
- 3
- 5
- 7
-10
-15
-24
dB
0
BEAT
COLOR
HILOW
CUE
BA THRU
10
9
8
7
6
5
4
3
2
1
0
CD/LINE LINE USB3/4
EQ/
TRIM
9
HI
6-26 /MID
6-26 /LOW
6-26 /
ISO
OVER
10
7
4
2
1
- 1
- 2
- 3
- 5
- 7
-10
-15
-24
dB
0
BEAT
COLOR
HILOW
CUE
BA THRU
10
9
8
7
6
5
4
3
2
1
0
CD/LINE LINE USB5/6
EQ/
TRIM
9
HI
6-26 /MID
6-26 /LOW
6-26 /
ISO
OVER
10
7
4
2
1
- 1
- 2
- 3
- 5
- 7
-10
-15
-24
dB
0
OVER
10
7
4
2
1
- 1
- 2
- 3
- 5
- 7
-10
-15
-24
RL dB
0
BEAT
COLOR
HILOW
CUE
BA THRU
10
9
8
7
6
5
4
3
2
1
0
CD/LINE PHONO USB7/8
EQ/
TRIM
9
HI
6-26 /MID
6-26 /LOW
6-26 /
ISO
OVER
10
7
4
2
1
- 1
- 2
- 3
- 5
- 7
-10
-15
-24
dB
0
BEAT
COLOR
HILOW
CUE CUE
CUE
BA THRU
STEREO
EQ
MONO
BA
ISOLATOR
WAKE UP
LEVEL
0
BALANCE
RL
MASTER
BOOTH MONITOR
EQ CURVE
CH FADER
CROSS FADER
0
AUTOTAP BPM
%ms
1
2
34 MIC
CF.A
CF.B
MASTER
CROSS FADER ASSIGN
DJ mixer other than theDJM-2000nexus/DJM-2000/DJM-900nexus
Connection procedure
� Creating the [PLAYER No.] setting
1 Check that no USB devices or SD memory cards are connected to the DJ player(s), then turn on the power of the DJ player(s) and the DJ mixer(s) before connecting the LAN cables.! The [PLAYER No.] setting cannot be changed if a USB device or SD memory card is connected or if a link is established.
2 Press the DJ player’s [MENU/UTILITY] button for over 1 second to open the UTILITY screen, then set the number to be specified for [PLAYER No.] (a number from 1 to 4).
[PLAYER No.] setting screen (ex.: when set to [PLAYER 2])
! Set the second DJ player on in the same way.! [PLAYER No.] is set to [AUTO] upon shipment from the factory.! Set so that no two players have the same player number. If they do, [PLAYER No.] flashes continuously.
� Connecting the cables (LAN cable and audio cables)
For details on connections, see the operating instructions for the respective devices. Connect the LAN cables and audio cables referring to the connections diagrams.
26 En
27En
Connecting
the CD
J-2000/C
DJ
-900 and another m
ixer
Checking the connections
� Checking the DJ player’s link established by LAN connection (for the CDJ-2000)
Check that the player number indicated on the DJ player’s screen is lit in white.LINK NGLINK OK
! If the player number indicated on the DJ player’s screen is lit in gray, the link is not established. If there is a DJ player for which the player number is lit in gray, redo the connection procedure.
! Set the second DJ player on in the same way.
� Checking the DJ player’s link established by LAN connection (for the CDJ-900)
Press the DJ player’s [MENU/UTILITY] button for over 1 second to open the UTILITY screen, then check that [CONNECTED] is displayed for [LINK STATUS].
UTILITY2NOT CONNECTEDON–
PLAYER No.LINK STATUSAUTO STANDBYMIDI CHANNEL
LINK NG
UTILITY2CONNECTEDON–
PLAYER No.LINK STATUSAUTO STANDBYMIDI CHANNEL
LINK OK
! If [NOT CONNECTED] is displayed, the link is not established. If there is a DJ player for which [NOT CONNECTED] is displayed, redo the connection procedure.! Set the second DJ player on in the same way.
� Checking the connected device(s)
1 Press one of the medium select buttons to check the connection with the respective device.— To use a computer (Mac/Windows) connected by wired LAN: Press the [LINK] button.— To use a USB device or SD memory card connected to another player that is connected by link: Press the [LINK] button.— To use a USB device connected by wire to the USB "A terminal": Press the [USB] button.— To use an SD memory card: Press the [SD] button.
! The following describes an example for when using a computer (Mac/Windows) connected by wired LAN (for when the [LINK] button is pressed).
2 Press the [LINK] button.
LINK
USB
SD
DISC
BROWSE TAG LIST INFO MENU
UTILITY BACK / REMOVETAG TRACK
TIMEMODE
AUTOCUE
3 Click the [LINK] button to connect.
rekordbox (Mac/Windows)
The files, folders and lists loaded into the respective devices are displayed on the DJ player’s screen.
Ex.: When connecting a computer (Mac/Windows)
rekordbox (Mac/Windows)
55.481 mm
This completes checking the connections.
© 2012 PIONEER CORPORATION.All rights reserved.PIONEER CORPORATION1-1, Shin-ogura, Saiwai-ku, Kawasaki-shi, Kanagawa 212-0031, Japan<DRI1124-B>
28 En