PRINTER CONFIGURATION GUIDE
-
Upload
rhoda-odonnell -
Category
Documents
-
view
49 -
download
0
description
Transcript of PRINTER CONFIGURATION GUIDE
PRINTER CONFIGURATION
GUIDE
Scangle SGT-C2008 thermal printer
A. Scangle SGT-C2008 thermal printer USB Port installation
C. To print test page.
B. Scangle SGT-C2008 thermal printer USB Port configuration
D. Configure the printer in the POS system
Step 1. Double click SGT-C2008 Driver.exe
Step 2. Click Next
A. Scangle SGT-C2008 thermal printer USB Port installation
Step 3. Click I accept the agreement
Step 4. Click Install.
Step 5. Click the Large button.
Step 6. Click continue
Step 7. Select Windows XP.
Step 8. Click Next.
Step 9. Click OK.
Step 12. Click Finish.
B. Scangle SGT-C2008 thermal printerUSB Port configuration
Step 1. Click Start.
Step 2. Click Printers and Faxes.
Step 3. Right click POS80 printer
Step 3. Click properties.
Step 4. Click Ports.
Step 5. Pull down the ports.
Step 6. Click check the USB001.
Step 7. Click Apply.
Note : To check if the printer is properly printing click this button Print Test Page.
Step 8. Click OK.
C. To print test page.
Step 9. Click Print Test Page.
Note : To check if the printer is properly printing click this button Print Test Page.
D. Configure the printer in the POS system
Step 1. At the cashier window. Click System setup.
Step 2. Input the admin/supervisor user name and password.
Step 3. Click OK.
Step 4. Click Printing.
Step 5. At the System Printer select Epson.
Step 6. At the System Printer Name select POS80.
Step 7. Click Save. Then Click OK. You can now use the printer.
THANK YOU!
www.tanaytechnologies.comDate created : 03-08-2012