Print screens of my magazine
Click here to load reader
Transcript of Print screens of my magazine
![Page 1: Print screens of my magazine](https://reader038.fdocuments.us/reader038/viewer/2022100603/5596c9e81a28aba7198b45d4/html5/thumbnails/1.jpg)
Print screens of my magazine
1. First I started off with the image which I then edited In photo shop using a sepia effect and enlarging the image so that It fitted the screen. The tool I used for this was the black n white tool I then pressed ‘tint’ To get the sepia effect. I did this to make it look quite vintage.
2. Then I added basic features like the Masthead, The top images and the strapline so I could basically see Where I wanted my coverlines. I used the ‘T’ text tool to add my information I then changed the size and font for greater effect. I added original images for the imagery and used the resizer tool to change the size of them.
3. Then I added the short article coverlines and
barcode, date, title and slogan. This made the front cover
Complete. I got the barcode from the internet and added
it in.
![Page 2: Print screens of my magazine](https://reader038.fdocuments.us/reader038/viewer/2022100603/5596c9e81a28aba7198b45d4/html5/thumbnails/2.jpg)
1. I first started off with
a contents page base. Ordering where
I wanted the information to go. I used
the rectangle shape to underline the
subtitles.
2. I then added
three pictures along the side
to make it more visually
pleasing and musical, the
pictures I added were original
and were then added in and I
changed the contrast aswell.
3. I then ended
up with this. I added
information and detail to my
contents page and in the end
I was happy with the final
result. I used the ‘T’ text tool
to add information. This was
to make it look like a
contents page
![Page 3: Print screens of my magazine](https://reader038.fdocuments.us/reader038/viewer/2022100603/5596c9e81a28aba7198b45d4/html5/thumbnails/3.jpg)
1. I started off with the title and image set
it out in a mo town style following a professional
magazine. MOJO motown magazine. To give me
the idea. I used the polygon lasso tool to delete
the background of the image. I then used the black n white tool to make my picture black
and white this is so it blended in with the background.
2. Next I added the article
in, with the dropcap to
start it off, I found writing
an article quite
challenging at first but
when I had a good plan I
found the challenge to be
quite rewarding. The ‘T’
text tool enabled me to
add text the I used the coloumn tool to add coloumns so that it looked like a typical double
page spread.
3. I then added a few extras like the
big quotation in the middle of the article
and a smaller image of one of the
members. I used the resizer tool to make
my image smaller.