Print Name Title Signature Date · 2020. 8. 13. · door vinyl wall plaque flag sign 1 1 1 s1 s2 s3...

Approved Approved as NotedNot ApprovedResubmit with Changes

Print Name

Signature

Title

Date

APPROVAL

REV #: 84879-A

0 . .199 11 | Blair 4879 | BOA 84879# 8 _19

920 South StreetPhiladelphia, PA 19147

BANK OF AMERICA

SPECIFICATIONS - Bank of America

of 12

2017

REVISION

PROJECT INFORMATION

These drawings are not for construction purposes. The information contained herein is intended to express design intent only.This original design is the sole property of Blair Companies. It cannot be reproduced, copied or exhibited, in whole or in part, without �rst obtaining written consent from Blair Companies.

Initials

CUSTOMER INITIALS

CLIENT: Bank of America

ADDRESS: 920 South Street

Philadelphia, PA 19147

M NUMBER: 84879

DATE: 9/11/2019

RENDERED: JMETZ

FILE NAME: BOA 84879_19

CATEGORY:

SCOPE OF WORK - INCLUDED

BUILDING

PARKING LOT

ADDITIONAL SCOPE

1.2.3.4.

1. CHANNEL LETTERS ON BACKER PNL2. DOOR VINYL3. WALL PLAQUE4. FLAG SIGN

1.2.3.4.

BUILDING

PARKING LOT

ADDITIONAL SCOPE

1.2.3.4.

1.2.3.4.

1.2.3.4.

SCOPE OF WORK - NOT INCLUDED

COLOR SPECIFICATIONS

VINYL MATCH PAINT MATCH

3M 3632-2472TRANSLUCENT RED VINYL

3M 3632-8222TRANSLUCENT BLUE VINYL

3M 3632-20TRANSLUCENT WHITE VINYL

RED MP49696SATIN FINISH

BLUE MP21670RSATIN FINISH

GARBO SILVER MP19894STAINLESS STEEL

WHITE MP 21668R 6595SATIN FINISH

NA

NASILVER METALLIC MP02650R

14405 LVG GLOSS

COLOR SPECIFICATIONS

VINYL MATCH PAINT MATCH

NA

NA

NA

CHAMPAGNE METALLICMP21314

CAMPBELL SOUP REDMP10252

WARM GRAYMP81295R 137294

COOL GRAY (PMS 425)MP58477

NA

NAMICA BLACK SANDTEX

SW MBSL00042 R2

3M 7725-10OPAQUE WHITE VINYL NA

3M 3635-30DIFFUSER WHITE VINYL NA

3M 680-75 BLUEREFLECTIVE BLUE

NA

5107 Kissell Ave.Altoona, PA 16601

P: 814.949.8287

F: 814.949.8293

blaircompanies.com

Drawing will expire 90 days after date oncover. If production request is sent in after90 days, 24 hours is required to reviewapproval.

SITE PLAN - Bank of America

of 12

2017

REVISION

SITE PLAN


1

Initials

CUSTOMER INITIALS


P: 814.949.8287

F: 814.949.8293

blaircompanies.com

HORIZONTAL CHANNEL LETTERS

QTY


DOOR VINYL

WALL PLAQUE

FLAG SIGN

1

1

1

S1

S2

S3

S4

920 SOUTH STREET, PHILADELPHIA, PA 19147

PROJECT INFORMATION




M NUMBER: 84879

DATE: 9/11/2019

RENDERED: JMETZ


CATEGORY:S1 S2S3S4

of 12

2017

REVISION


Initials

CUSTOMER INITIALS


EXISTING CONDITIONS

PROPOSED

DETAIL - Bank of America - EXISTING / PROPOSED - Horizontal Channel Letters on Backer Panel

PROJECT INFORMATION




M NUMBER: 84879

DATE: 9/11/2019

RENDERED: JMETZ


CATEGORY:

S-1

of 12

2017

REVISION


Initials

CUSTOMER INITIALS


P: 814.949.8287

F: 814.949.8293

blaircompanies.com


DETAIL - Bank of America - EXISTING / PROPOSED - Door Vinyl

EXISTING CONDITIONS

PROPOSED

S-2

PROJECT INFORMATION




M NUMBER: 84879

DATE: 9/11/2019

RENDERED: JMETZ


CATEGORY:

Non employees may not solicit or

distribute materials

NO PETS PLEASE

Exception: animals assisting persons

with disabilities

In case of emergency contact

Bank of America Security

1.800.222.7511

NOTICE: This facility may be used

only to transact banking business.

NO TRESPASSING. Police take notice.



NO PETS PLEASE


with disabilities



1.800.222.7511



Saturday

Drive-Up Hours

Mon-Thurs

Lobby Hours

Mon-Thurs

Friday

Friday

Saturday

Xam-Xpm

Xam-Xpm

Xam-Xpm

Xam-Xpm

Xam-Xpm

Xam-Xpm

No Smoking within 25

feet of the entrance

Use our Mobile Banking app to deposit checks,

make an appointment and much more.


Initials

CUSTOMER INITIALS

DETAIL - Bank of America - EXISTING / PROPOSED - Wall Mounted Plaque

S-3

of 12

2017

REVISION


P: 814.949.8287

F: 814.949.8293

blaircompanies.com


PROJECT INFORMATION




M NUMBER: 84879

DATE: 9/11/2019

RENDERED: JMETZ


CATEGORY:

EXISTING CONDITIONS

PROPOSED

All Activities will

be Recorded to Aid

in the Prosecution

of Any Crime

Committed Against

This Facility.

WARNING

of 12

2017

REVISION

S-4


Initials

CUSTOMER INITIALS


P: 814.949.8287

F: 814.949.8293

blaircompanies.com


EXISTING CONDITIONS

PROPOSED

DETAIL - Bank of America - EXISTING / PROPOSED - Flag Sign

PROJECT INFORMATION




M NUMBER: 84879

DATE: 9/11/2019

RENDERED: JMETZ


CATEGORY:

1. SIGN FACE TO BE .125" ALUMINUM. FORM AS SHOWN.

CHEM WELD 1"x1"x .125" ALUMINUM TUBE FRAME AT

PERIMETER TO FORM SIGN BOX. MITER CUT, WELD

AND GRIND SMOOTH AT CORNERS. PAINT FINISH FACE

AND TUBE FRAME GARBO SILVER. GLOSS FINISH.

2. .125" ALUMINUM ANGLE FRAME. FORM AS SHOWN.

PAINT FINISH BANK OF AMERICA DARK GRAY.

SEMI-GLOSS FINISH. MECHANICALLY ATTACH TO REAR

TUBE FRAME WITH COUNTERSUNK FLATHEAD

STAINLESS STEEL SCREWS. PAINT SCREW HEADS TO

MATCH.

3. LETTER FACE TO BE 1/2" PLASKOLITE 2406 LD

ACRYLIC. ROUT 3/8" FROM BACK TO FRONT LEAVING

A 1/8" THICK BY 5/32" WIDE "SHOULDER" AT THE

FACE. FIRST SURFACE DECORATE WITH BANK OF

AMERICA BLUE TRANSLUCENT FILM WITH OVER

LAMINATE. USE ARTWORK PROVIDED BY DESIGNER.

EXPOSED RETURNS TO HAVE A MILL FINISH. SECURE

WITH 3/8" SHORT SHANK FLATHEAD STAINLESS

STEEL SCREWS INTO CENTER OF 3/8" ACRYLIC FACE

RETURN. PRE-DRILL ONLY TO SCREW DEPTH TO

PREVENT TELEGRAPHING.

4. LETTER RETURNS TO BE .040" ALUMINUM COIL BRITE

BRUSHED CLEAR BY ALUMET SUPPLY. (888-925-8638)

FORM AS SHOWN. USE ARTWORK PROVIDED BY

DESIGNER. PROVIDE WEEP HOLE ON BOTTOM OF

LETTERS AND SYMBOLS. RUN A BEAD OF CLEAR

SILICONE CAULK ACROSS THE TOPS OF THE

FABRICATED LETTERS AND FLAGSCAPE ELEMENTS AT

THE SIGN FACE TO PREVENT "STREAKING" ON FACE.

5. LETTER BACKS TO BE .090" ALUMINUM. PAINT FINISH

INTERIOR SURFACES WITH LIGHT ENHANCEMENT

PAINT.

6. BLUE PORTIONS OF SYMBOL TO BE 1/2" PLASKOLITE

2406 LD ACRYLIC. ROUT 3/8" FROM BACK TO FRONT

LEAVING A 1/8" THICK BY 5/32" WIDE "SHOULDER"

AT THE FACE. FIRST SURFACE DECORATE WITH BANK

OF AMERICA BLUE TRANSLUCENT FILM WITH OVER

LAMINATE. USE ARTWORK PROVIDED BY DESIGNER.

EXPOSED RETURNS TO HAVE A MILL FINISH. SECURE

WITH 3/8" SHORT SHANK FLATHEAD STAINLESS

STEEL SCREWS INTO CENTER OF 3/8" ACRYLIC FACE

RETURN. PRE-DRILL ONLY TO SCREW DEPTH TO

PREVENT TELEGRAPHING.

7. RED PORTIONS OF SYMBOL FACE TO BE 1/2"

PLASKOLITE 2406 LD ACRYLIC. ROUT 3/8" FROM

BACK TO FRONT LEAVING A 1/8" THICK BY 5/32"

WIDE "SHOULDER" AT THE FACE. FIRST SURFACE

DECORATE WITH BANK OF AMERICA RED

TRANSLUCENT FILM WITH OVER LAMINATE. USE

ARTWORK PROVIDED BY DESIGNER. EXPOSED

RETURNS TO HAVE A MILL FINISH. SECURE WITH 3/8"

SHORT SHANK FLATHEAD STAINLESS STEEL SCREWS

INTO CENTER OF 3/8" ACRYLIC FACE RETURN.

PRE-DRILL ONLY TO SCREW DEPTH TO PREVENT

TELEGRAPHING

8. 1"x ALUMINUM TUBE FRAME AT PERIMETER OF

BACKING SHEET. SIZE AS REQUIRED TO ACHIEVE

CORRECT BORDER SIZE FOR EACH SIGN TYPE. REFER

TO ELEVATIONS FOR BORDER DIMENSIONS. PAINT

FINISH ALL EXPOSED SURFACES BANK OF AMERICA

RED. SEMI-GLOSS FINISH.

9. HEADER PANEL TO HINGE WITH S.S. PIANO HINGE.

ATTACH TO 2"x2" ANGLE AS REQUIRED.

of 12

2017

REVISION


Initials

CUSTOMER INITIALS


P: 814.949.8287

F: 814.949.8293

blaircompanies.com


DETAIL - Bank of America - Channel Letter on Backer Panel

PROJECT INFORMATION




M NUMBER: 84879

DATE: 9/11/2019

RENDERED: JMETZ


CATEGORY:

16'-11" BACK PLATE

1 1/2" 16'-8" SIGN FACE 1 1/2"

14'-9 1/8"EQ. EQ.

9"

1 1

/2"

1 1

/2"

2'-8

"

1'-0

7/8

"6

5/8

"

2'-5

"

6 1

/4"

15'-9 5/8"

6 1/4"

3"

SIDE VIEWD5ng - Horizontal Wall Sign

TOP VIEW

Horizontal Large Wall SignHor(Channel Le� ers on Backer Panel)

ILLUMINATED VIEW DAY TIME VIEW

of 12

2017

REVISION


Initials

CUSTOMER INITIALS


P: 814.949.8287

F: 814.949.8293

blaircompanies.com


DETAIL - Bank of America - Door Vinyl

If door is a non accessible

handicap entrance, refer to

sheet 19 and 20 of this package

for support signage to be used

to guide customers to an

accessible entrance.

1

2

3

4

6

7

5

8

10

11

Note: Mullion dimensions

at base may vary.

NOTE: Informational copy

below hours is additive and

required information is added

from below signature working

towards grade.

Maintain 5’-0” baseline

for signature whenever

possible.

Maintain a minimum

of 4” above bottom

mullion

1”

1”

2”

4”

3”

1”

1”

1”

1”

1”

3”

1

1”

¾”

¾”

¾”

¾”

¾”

¾”

¾”

5’-

0”

¾”

Note: Refer to page

5 and 6 for security

decals and card

reader details.

13" x 12" ACRYLIC HOLDER

Preferred position installed by

others @ 5'-0" above grade.

SCALE: 2" = 1'-0"Optional Sidelight Application

4. Mobile banking app.

7. No Smoking symbol - Always use.

MATERIALS/APPLICATION

5. Non-employees may not solicit or distribute materials - Always use.

E. Note: Hours information to be verified with the Branch Manager.

All optional information must be provided through inspection of the site from

technical audit.

VINYLS: (Always refer to State-specific pages to check for regional layouts or copy.)

11. 'In case of emergency, contact Bank of America Security 1-800-222-7511' - Always

use.

B. Apply all vinyl with the exception of the handicapped symbol of accessibility on

second surface when glass is clear to medium tint.

D. Typeface is to be Franklin Gothic Demi Condensed. Use only this font. Substitute

fonts are not allowed.

F. Preferred position of 13” x 12” Acrylic Holder. Holder by others on second surface of

opposite door across from hours decals, as shown.

A. White 3M #7725-10 vinyl graphics.

C. Apply vinyls on the first surface when glass is dark tinted.

G. Handicap symbol to be 3M IJ180c white digitally printed with a blue background to

match PMS 7462C. Symbol to reverse out white. Overlaminate with 3M 8520 matte

overlaminate. Finish to meet 70% gloss ADA compliance requirements. When

required, always apply handicap vinyl to exterior of glass.

2. Lobby Hours - Always use. Maintain flush left alignment of days and flush right

alignment of hours information as shown.

3. Drive-Up Hours - Always use if applicable. Maintain flush left alignment of days and

flush right alignment of hours information as shown.

1. Inline Signature format - Always use Master Brand.

6. Handicap symbol - Use only on accessible entrance doors. For non-accessible

entrances, see sheets 19 and 20. Single handicap symbol alone should be used to

denote a handicap entrance.

8. 'NO PETS PLEASE' - Always use.

9. ATM location information - If ATM redirect copy exists remove only- do not replace.

10. 'NOTICE: This facility may be used only to transact banking business. NO

TRESPASSING. Police take notice.' - Always use.

Entrance Door Graphics - Single Door Vinyls

Retail Center - Universal Applica�on

NOTE: If entry door crash bar or other obstructions are on the front of the

door, space copy above or below as required. Provide a minimum space of

1” above and 2” below the obstruction or crash bar. Maintain a minimum of

4" above bottom mullion. If there is not enough space to apply necessary

copy, convert to a door plaque. Placement of crash bar and dimensions of

bottom mullion are shown in example only, field verify exact conditions

prior to fabrication.

EQUAL EQUAL

Widest available for

informational text.

1’-6 ½”



NO PETS PLEASE


with disabilities



1.800.222.7511






NO PETS PLEASE


with disabilities



1.800.222.7511



Saturday

Drive-Up Hours

Mon-Thurs

Lobby Hours

Mon-Thurs

Friday

Friday

Saturday

Xam-Xpm

Xam-Xpm

Xam-Xpm

Xam-Xpm

Xam-Xpm

Xam-Xpm





1'-3”(Hours Text)




NO PETS PLEASE


with disabilities



1.800.222.7511



Saturday

Drive-Up Hours

Mon-Thurs

Lobby Hours

Mon-Thurs

Friday

Friday

Saturday

Xam-Xpm

Xam-Xpm

Xam-Xpm

Xam-Xpm

Xam-Xpm

Xam-Xpm





PROJECT INFORMATION




M NUMBER: 84879

DATE: 9/11/2019

RENDERED: JMETZ


CATEGORY:

of 12

2017

REVISION


Initials

CUSTOMER INITIALS


P: 814.949.8287

F: 814.949.8293

blaircompanies.com


DETAIL - Bank of America - Wall Plaque

PROJECT INFORMATION




M NUMBER: 84879

DATE: 9/11/2019

RENDERED: JMETZ


CATEGORY:

Wall Plaque

All Activities will

be Recorded to Aid

in the Prosecution

of Any Crime

Committed Against

This Facility.

WARNING

12” FACE SIZE

12”

FAC

E S

IZE

10”

CO

PY

AR

EA

10” COPY AREA

3/4”

Restoration Notes: Patch and repair existing wall surface to likenew condition. For brick or stone walls fill holes with matchingsilicone. Repaint to match existing color finish. Verify copy w/bankprior to fabrication. Fabricator to verify if secondary copy is requiredon sign face (i.e. legal, towing, city ordinances or code information.)Field verify dimensions of the sign and surrounding space shownin the proposed image. If the field verification indicates that the signwill not fit, alterations will be made by Blair prior to manufacturing.

of 12

2017

REVISION


Initials

CUSTOMER INITIALS


P: 814.949.8287

F: 814.949.8293

blaircompanies.com


DETAIL - Bank of America - Flag Sign

PROJECT INFORMATION




M NUMBER: 84879

DATE: 9/11/2019

RENDERED: JMETZ


CATEGORY:

3'-10 1/8"

6" 1"

1 1/8"

1"

1 1/8"

3/8" 3/8"

6"1

"

1 1

/8"

1"

1 1

/8"

3/8

"3

/8"

11"

11

"

2'-7" 4"4"

6" 3'-3" 1 1/8"

1'-4

3/4

"

2'-7

1/4

"

3'-10 1/8"

2'-9

1/2

"

1 1

/8"

1 1

/8"

EQ

6" 1 1/8"3'-3"

EQ

SIDE VIEW

F2ng-b - 2'-9 3/8" Flag Sign (Special) (8.43 sqft)

TOP VIEW

1

2

9

8

3 4 5

1

11

1

8

9

123 4

3 5

3 4

5

13

1. .125" ALUMINUM SIGN FACE. SIZE AS SHOWN. PAINT FINISH

GARBO SILVER. GLOSS FINISH. CHEM WELD TO ALUMINUM

ANGLE FRAME.

2. 1"x1"x.125" ALUMINUM ANGLE FACE FRAME. CHEM WELD

SECOND SURFACE TO SIGN FACE. PAINT FINISH ALL

EXPOSED SURFACES GARBO SILVER. GLOSS FINISH.

3. 3/4” CLEAR POCKET ROUTED LETTERS AND

FLAGSCAPE. ROUT BACK FROM FACE .625” TO PROVIDE A

CONTINUOUS 1/8” “SHOULDER” TO ALLOW SECOND

SURFACE RETENTION STUD MOUNT BY .125” CLEAR

BACKING SHEET. FIRST SURFACE CHEM WELD .118 RED AND

BLUE ACRYLIC. SIGN MANUFACTURER TO FOLLOW ACRYLIC

MANUFACTURERS RECOMMENDATION FOR CHEM WELDING

WITHOUT BUBBLES OR DE-LAMINATION IN FUTURE.

RETURNS TO HAVE A MILL FINISH. SECOND SURFACE

DECORATE WITH 3M 3635-30 DIFFUSER FILM. USE

ARTWORK PROVIDED BY DESIGNER.

4. FIRST SURFACE CHEM WELD “Bank of America” AND

PORTIONS OF FLAGSCAPE WITH .118” BLUE TRANSLUCENT

ACRYLIC #2050.

5. FIRST SURFACE CHEM WELD RED PORTIONS OF FLAGSCAPE

WITH .118” RED TRANSLUCENT ACRYLIC #2793.

6. 3" DIMENSIONAL SYMBOL. BLUE PORTIONS OF FLAGSCAPE

TO BE 1/2"PLASKOLITE 2406 LD ACRYLIC. ROUT 3/8" FROM

BACK TO FRONT LEAVING A 1/8" THICK BY 5/32" WIDE

"SHOULDER" AT THE FACE. FIRST SURFACE DECORATE

WITH BANK OF AMERICA BLUE TRANSLUCENT FILM WITH

OVER LAMINATE. USE ARTWORK PROVIDED BY DESIGNER.

EXPOSED RETURNS TO HAVE A MILL FINISH. SECURE WITH

3/8" SHORT SHANK FLATHEAD STAINLESS STEEL SCREWS

INTO CENTER OF 3/8" ACRYLIC FACE RETURN. PRE-DRILL

ONLY TO SCREW DEPTH TO PREVENT TELEGRAPHING

7. 3" DIMENSIONAL SYMBOL. RED PORTIONS OF SYMBOL FACE

TO BE 1/2"PLASKOLITE 2406 LD ACRYLIC. ROUT 3/8" FROM

BACK TO FRONT LEAVING A 1/8" THICK BY 5/32" WIDE

"SHOULDER" AT THE FACE. FIRST SURFACE DECORATE

WITH BANK OF AMERICA RED TRANSLUCENT FILM WITH

OVER LAMINATE. USE ARTWORK PROVIDED BY DESIGNER.

EXPOSED RETURNS TO HAVE A MILL FINISH. SECURE WITH

3/8" SHORT SHANK FLATHEAD STAINLESS STEEL SCREWS

INTO CENTER OF 3/8" ACRYLIC FACE RETURN. PRE-DRILL

ONLY TO SCREW DEPTH TO PREVENT TELEGRAPHING.

8. LETTER RETURNS TO BE .040" ALUMINUM COIL BRITE

BRUSHED CLEAR BY ALUMET SUPPLY. (888-925-8638) FORM

AS SHOWN. USE ARTWORK PROVIDED BY DESIGNER. RUN A

BEAD OF CLEAR SILICONE CAULK ACROSS THE TOPS OF THE

FABRICATED LETTERS AND FLAGSCAPE ELEMENTS AT THE

SIGN FACE TO PREVENT "STREAKING" ON FACE.

9. .125" ALUMINUM "Z" ANGLE FRAME REVEAL. FORM AS

SHOWN. PAINT FINISH BANK OF AMERICA DARK GRAY.

SEMI-GLOSS FINISH. WELD TO ANGLE FACE FRAME AS

SHOWN.

10. 6"x2"x.125" ALUMINUM CHANNEL SIGN BODY FRAME. MITER

CUT, WELD AND GRIND SMOOTH AT CORNERS. PAINT FINISH

ALL EXPOSED SURFACES BANK OF AMERICA RED.

SEMI-GLOSS FINISH.

11. .125" ALUMINUM CLADDING. FORM AS SHOWN. PAINT

FINISH EXTERIOR SURFACES WITH BANK OF AMERICA RED.

SEMI-GLOSS FINISH.

12. .125" ALUMINUM REMOVABLE ACCESS DOOR. WELD "Z" CLIP

ON INBOARD SIDE TO ENGAGE ANGLE FRAMING. PAINT

FINISH ALL EXPOSED SURFACES BANK OF AMERICA RED.

SEMI-GLOSS FINISH. SECURE OUTBOARD SIDE WITH

COUNTERSUNK FLATHEAD STAINLESS STEEL SCREWS.

13. .25" ALUMINUM MOUNTING PLATE. WELD TO CHANNEL

FRAME OF SIGN. PRE-DRILL HOLES FOR THROUGH BOLT

ATTACHMENT TO WALL AND ELECTRICAL PASS THROUGH.

Flag Sign (Special) Eleva�ons

ILLUMINATED VIEW

DAY TIME VIEW

INSTALLATION DETAIL/SAFETY CRITERIA - Bank of America

of 12

2017

REVISION


PIN MOUNTED

SAFETY CRITERIAINSTALLATION EXAMPLES

1. 3/16” TAPCON

1. 3/8” ALL-THREAD2. 3.8” LOCK WASHER3. 3.8” FLAT WASHER4. 3/8” NUT

1. 3/8” ALL-THREAD2. 3.8” LOCK WASHER3. 3.8” FLAT WASHER4. 3/8” NUTSERT

1. #8 DRYWALL SCREW COARSE THREAD

FLUSH-MOUNT / DRYVIT FLUSH-MOUNT / BRICK RACEWAY / DRYVIT

LAG & SHIELD ACROSS TOP & BOTTOMLAG & SHIELD ACROSS TOP & BOTTOM

RACEWAY / DRYVIT

ALL-THREAD ON TOP LEFT & RIGHT ONLY

RACEWAY / BRICKRACEWAY / BRICK

ALL THREAD ON TOP LEFT & RIGHT ONLY

1. 2” X 2” X 1/4” ALUM MOUNTING SHOE2. 3/8” X 3” LAG & SHIELD3. 3/8” X ALL THREAD4. 3/8” LOCK WASHER5. 3/8” FLAT WASHER6. 3/8” NUT

1. 3/8” NUTSERT2. 3/8” X 3” LAG & SHIELD3. 3/8” X ALL THREAD4. 3/8” LOCK WASHER5. 3/8” FLAT WASHER

1

1

1

1

2

66

2

2

2

2

5

3

3

3

3

4

4

4

4

4

4

5

All employees are recommended to possess a

valid API certification, follow the established

guidelines set forth by API as well as follow any

local, state, or federal laws.

● Perform a Pre-Task Job Safety Analysis

● Understand how and where to obtain First-Aid

and Medical treatment, including CPR.

● Use the proper level of PPE per the assigned

task.

● Only use tools that are in safe working order

before using them.

● Always use tools for their intended purpose and

never over their safe working limit.

● Employees operating vehicles must conform to

all DOT requirements as well as API regulations.

● Use proper fall arrest equipment.

● Understand the requirements for working at

height on a job site.

● Properly barricaded the work area from the

public in accordance with Section 8 of the API

guidelines.

● Only competent and trained people using

approved equipment in a manner in accordance

with Section 10 of the API guidelines should

perform lifting duties.

● Follow all approved lock-out tag-out policies

when de-energizing equipment.

PersonalExamples of Equipment Include:Protective Equipment, Barricade, Crane, Hoist,

Bucket Truck, Scissor Lift, Ladder, Vinyl Applicators

(Squeegee or Application Liquid), Welder/Torch

and Hand Tools/Power Tools

1. 1/4” ALL-TREAD

All necessary hardware to be supplied by the installer.

Service contact: 814-283-2177Service hours: 8:00 am to 4:30 pm est, Monday -FridayFor after hours/holiday emergencies, please call 800-563-9598www.blaircompanies.com/ledsupport


P: 814.949.8287

F: 814.949.8293

blaircompanies.com


PROJECT INFORMATION




M NUMBER: 84879

DATE: 9/11/2019

RENDERED: JMETZ


CATEGORY:

Print Name Title Signature Date · 2020. 8. 13. · door vinyl wall plaque flag sign 1 1 1 s1 s2 s3...

Documents

Transcript of Print Name Title Signature Date · 2020. 8. 13. · door vinyl wall plaque flag sign 1 1 1 s1 s2 s3...