Prime Group Visor

PRODUCT SPECIFICATIONS

PREMIUM

For product code: PG_Visor-Premium

PROTECTIVE EYEWEAR

With a wife working as an Advanced Critical Care Practitioner on an Intensive Care Unit, I am constantly reminded and brought back down to earth with a sense of reality on what really matters. With the current Covid-19 pandemic, nothing more brings this home than it does right now. Facing patients showing symptoms of the virus in the early phases of the outbreak without appropriate Personal Protective Equipment (PPE), particularly visor which act as a physical barrier, she rang me with a plea of help. Not having available supplies to have a clean visor, staff on the unit cleaned a used visor, and we collected it that afternoon. By 6am the following morning we had de-constructed it, re-engineered it and created a prototype. This was tested that morning, tweaked and we went into production that day, delivering 100 that afternoon, less than 24hrs later to help keep the team protected. After one of the consultants posted a message of thanks on Twitter, things changed dramatically, and we realised the extent of the PPE shortages within the NHS. A colleague of ours heard what we were doing and set up a gofundme page to help provide supplies to the NHS for Free. Corporate sponsors also got involved allowing us to cut red tape and get supplies to those that need them most urgently. Overnight our production facility was transformed. It’s thanks to the people on the frontline of the NHS and other careworkers in the community that will help us get through this pandemic. They selflessly face this crisis daily. Our goal is to protect as many of those individuals, at cost, as we possibly can so that those daughters, mothers, fathers, husbands, wives, grandparents etc. can go back to their own families like my wife does to ours, safe and well. We have ensured that the visors we produce are to the correct standard as we couldn’t send our NHS army in blue to fight this battle without the correct equipment, so we achieved British Standards Institute CE certification. We have to date (16th April) protected 350,000 individuals in just a few weeks. We will be protecting 1m more in the coming weeks, producing c.25,000 visors a day. Thanks to global collaborations, we have shared our designs and technical know-how with over 30 countries, all producing our designs to help fight this pandemic on a global scale. One of our core values is We Make It Better, and this time, We REALLY do aim to help make it better. Thank you for your support in helping us fight this outbreak

Regards

Jon Tolley(Managing Director)

Why Visors?

BSI CERTIFICATEEU TYPE EXAMINATION CERTIFICATE

BSI CERTIFICATEEU TYPE EXAMINATION CERTIFICATE

BSI CERTIFICATEEU TYPE EXAMINATION CERTIFICATE

BSI CERTIFICATETEST REPORT 3174591

3174591 -Test Report.

Page 2 of 7

Introduction. This report has been prepared by S. Macdonnell and relates to the activity detailed below:

Job/Registration Details Client Details

Job number: 3174591 Job type: Testing Samples Submitted Start Date: 6 April 2020 Test type: Limited Sample ID: 10189433 Registration: CE 727825 Scheme: PPE Regulation and EU recommendation

2020/403 Protocol: PP123 Scheme Mgr: Nathan Shipley

Prime Print Group Limited Unit 8 Burma Road Mansfield Nottinghamshire NG21 0RT United Kingdom

The report has been approved for issue by M Mayo – Testing Team Manager

Approved For Issue

Approver Name:

Issue Date: 7 April 2020

Objectives.

This is limited testing to only certain clauses or sub-clauses of the standard but these have been followed in full, as defined. This technical specification is applied to safety eyewear for use by healthcare workers, first responders and other personnel involved in the efforts to contain the COVID-19 virus and avoid its further spread and in relation to the EU Commission recommendation sheet 2020/403.

Product Scope. Premium face shield

Report Summary. The samples were received on 3 April 2020 and the testing was started on 6 April 2020. The samples submitted complied with the limited requirements of the test work conducted.

Test Samples. Sample Id ER Number Description

1 10189433 6 x Premium face shield

BSI CERTIFICATETEST REPORT 3174591

3174591 -Test Report.

Page 3 of 7

Test Requirements. BS EN 166:2002 + Results Table - Personal Eye Protection

Clause Requirements

6 Design and Manufacturing Requirements

6.1 General construction Pass

Eye-protectors shall be free from projections, sharp edges or other defects which are likely to cause discomfort or injury during use.

6.2 Materials

No parts of the eye-protector which are in contact with the wearer shall be made of materials which are known to cause any skin irritation. Note:- Manufacturer's responsibility to use materials not known to cause skin irritation when in contact with the wearer of the eye-protector.

N/T

6.3 Headbands Pass

Headbands, when used as the principal means of retention, shall be at least 10 mm wide over any portion which may come into contact with the wearer’s head. Headbands shall be adjustable or self-adjusting.

7 Basic, particular and optional requirements

7.1 Basic requirements

7.1.1 Field of vision Pass

The size of the field of vision is defined in conjunction with the appropriate head-form described in clause 17 of EN 168:2001.

7.1.2 Optical requirements

7.1.2.1 Spherical, astigmatic and prismatic refractive powers

7.1.2.1.1 Unmounted oculars covering one eye

For non-corrective oculars testing shall be in accordance with clause 3.1 of EN 167:2001, and for corrective oculars in accordance with EN ISO 8980-3 . Not applicable to style of eye-protector.

N/A

7.1.2.1.2 Mounted oculars and unmounted oculars covering both eyes Pass

The refractive power characteristics of mounted oculars or unmounted oculars covering both eyes shall be measured by the method specified in clause 3.2 of EN 167:2001 at the visual centre of the ocular.

BSI CERTIFICATETEST REPORT 3174591

3174591 -Test Report.

Page 4 of 7

Clause Requirements

7.1.3 Quality of material and surface Pass

Testing shall be in accordance with clause 5 of EN 167:2001 Except for a marginal area 5 mm wide, oculars shall be free from any significant defects likely to impair vision in use, such as bubbles, scratches, inclusions, dull spots, pitting, mould marks, scouring, grains, pocking, scaling and undulation.

7.2.4 Protection against droplets and splashes of liquids

Eye-protectors for use against droplets (goggles) and splashes of liquids (face-shields) shall be tested in accordance with the methods specified in clause 12 of EN 168:2001. The results shall be considered to be satisfactory if:

a) no pink or crimson colouration appears in the ocular regions defined by the two circles when assessing goggles for protection against droplets. No account shall be taken of any such colouration up to a distance of 6 mm inside the edges of the eye-protector; Not applicable to style of eye-protector.

N/A

b) face-shields cover the eye-region rectangle of the appropriate head-form as described in clause 10.2.2.2 of EN 168:2001 as assessed in accordance with 10.2 of EN 168:2001. Note:- Area of coverage for faceshields assessed using non-standard test equipment.

Pass

7.2.8 Lateral Protection Pass

Testing shall be in accordance with clause 19 of EN 168:2001.

Results table

Actual test results See Table A - BS EN 166 2002

BSI CERTIFICATETEST REPORT 3174591

3174591 -Test Report.

Page 6 of 7

Supporting Data – Test Results

Table A - BS EN 166 2002

Test Results. CLAUSE 7.1.2.1.2 OPTICAL REQUIREMENTS (Oculars Without Corrective Effect) Mounted and unmounted oculars covering both eyes Requirements

Optical Spherical Astigmatic Difference in Prismatic Class Refractive Refractive Refractive Power (2) Power (1) Power (1) Horizontal Vertical Base Base Out In

1 ± 0.06 0.06 0.75 0.25 0.25 2 ± 0.12 0.12 1.00 0.25 0.25

3 + 0.12 0.25 1.00 0.25 0.25 - 0.25 0.25 1.00 0.25 0.25

Measurements of Spherical and Astigmatic Power and Difference in Prismatic Refractive Power Measurements made by the method specified in EN 167:2001 Clause 3.2

Sample Spherical and Resultant Resultant Difference in Left (L) Astigmatic Spherical Astigmatic Prismatic Refractive

Right (R) Power (1) (1) (1) Power (2) D1 + D2

2

(D1 - D2) Horizontal Vertical

D1 D2 Base Power Power 1 L -0.01 -0.01 -0.01 0.0 R -0.01 0.0 -0.005 0.01 Out 0.05 0.0 2 L 0.0 0.0 0.0 0.0 R 0.0 0.0 0.0 0.0 Out 0.05 0.0 3 L 0.0 0.0 0.0 0.0 R 0.0 -0.01 -0.005 0.01 Out 0.05 0.0

D1 = horizontal bars readings D2 = vertical bars readings Optical Class: 1 (1) Dioptres per metre. (2) Prism dioptres cm per metre.

BSI CERTIFICATETEST REPORT 3174591

3174591 -Test Report.

Page 7 of 7

Test Results (Continued). 7.2.4 Protection Against Droplets and Splashes of Liquid Requirement (1) Eye protectors for use against droplets (goggles) and splashes of liquids (faceshields) Pass shall be tested in accordance with the methods specified in Clause 12 of BS EN 168:2001

(1) Area of coverage for faceshields assessed using non- standard test equipment.

7.2.8 Lateral Protection Requirement Sample Nos: 4-6 (1) Pass When assessed, the eye protector covered/did not cover the lateral protection region on the headform in accordance with Clause 19 of EN 168:2001.

(1) Adjusted by BSI as required to provide best fit on headform.

Photograph of model submitted:

*** End of Report ***

DECLARATIONOF CONFORMITY

DECLARATION of Conformity (DOC)

PPE for Healthcare Professionals (2020/403) Eye protection Technical Specification

We, Prime Print Group Limited of Unit 8, Burma Road, Mansfield, Nottingham, NG21 0RT (registered office number: 02233931, D&B number: 399091776) being the manufacturer established in the community (European Union), hereby declare that the PPE units described hereafter as

Prime Group Premium PPE Visor

Product Code:

PG_Visor-Premium

are in conformity with the provisions of CE certification towards is BSI’s PPE for Healthcare Professionals 2020/403 –Eye protection Technical Specification.

Visual:

This is in conformity with PPE Regulation (EU) 2016/425 and are identical to the models of PPE units which are the subject of CE certification for BSI’s PPE for Healthcare Professionals 2020/403 –Eye protection Technical Specification. Examination certificate number: CE 727825 (issued 03/04/2020) issued by BSI Group, Kitemark Court, Davy Avenue, Knowlhill, Milton Keynes, MK5 8PP

Signed by: Jonathan Tolley Title: Director

Prime Print Group Ltd, United Kingdom

Date: 3rd April 2020

GALLERYPG_VISOR_PREMIUM

GALLERYPG_VISOR_PREMIUM

MATERIALSPG_VISOR_PREMIUM

Elastic Strap84% Nylon, 15% Elastine

A single 330mm length, ≥12mm width elastic strap is ultrasonical-ly welded to 2 marked locations on the visor.

Sonically welded elastic head-band for added strength.

Click here for more detail.

PREMIUM PPE VISOR- PG_Visor-Premium

Prime Print Group Ltd, Unit 8, Burma Road Blidworth, Nottingham. NG21 0RT, UK

USER INSTRUCTION: This protective Visor is manufactured for COVID-19 protection only. This protective Visor is not a PPE device for general

use and shall not be used for purposes other than protection against COVID-19. This visor should not be worn for more than one shift as per Regulation & Technical Specification: BSI’s PPE for Healthcare Professionals 2020/403 – Eye protection Technical Specification

BSI’s PPE for Healthcare Professionals 2020/403–Eye protection Technical SpecificationNotified Body Number: 0086 BSI Assurance UK Ltd, Kitemark Court, Davy Avenue Knowlhill, Milton Keynes, MK5 8PP. Country: UK

BagPolythene 30mic food safe bagFinished visor is placed in a 300x450mm, 30mic clear Polythene bag and sealed with 1x instruction / product label.

PREMIUM & STANDARD PPE VISOR- PG_Visor-Premium & Standard BSI’s. BSI’s PPE for Healthcare Professionals 2020/403 –Eye protection Technical Specification Notified Body Number: 0086 BSI Assurance UK Ltd, Kitemark Court, Davy Avenue Knowlhill, Milton Keynes, MK5 8PP. Country: UK

Foam PaddingVE21 Foam

200 x 35 x 40mm VE21 foam strip to be applied with permanent double sided tape to visor on head band location.

Click here for more detail.

Visor175mic Polyester

Hi Clarity 175mic.Melinex polyester.

Click here for more detail.

DIMENSIONSPG_VISOR_PREMIUM

Face Shield design layout and dimensions.

32mm

27mm

335mm

45mm

200mm

200m x 45mm x 35mm

18mm

330mm

190mm

BANK DETAILSPRIME PRINT GROUP LIMITED

Our registered office address with Companies House is:Prime Print Group LtdUnit 8 Burma Road,BlidworthNottinghamNG21 0RT

Our company registration number is: 02233931

VAT Registration number is: GB 496 3876 80

Our bank details are as follows:Prime Print Group LtdLloyds Bank PlcSort Code: 30-95-89Account Number: 54766060IBAN: GB45 LOYD 3095 8954 7660 60BIC/SWIFT: LOYDGB21041

If you require any further confirmation of our new payment details, please either contact accounts@primegroup.co.uk, or give us a call on 01623 499949.

PRIME GROUPMULTI-CHANNEL MARKETING

Today’s customers connect and communicate with brands across numerous on and offline channels. And, when they do, they expect a consistent, personalised experience.

Personalised marketing is one of the most important trends to hit marketing over the last few years. Personalised marketing gives your customers a unique, memorable experience and builds a bond; it lets them know you are paying attention and understand what they want and what they need. Brands who integrate print campaigns into their digital campaigns are seeing the results.

Our clients measure us on Creativity. Quality. Automation and Customer Service.

Harder to quantify though is our passion, positive ‘can do’ attitude, creative concepts and innovative products. We’ve been an early adopter of the latest technology – in digital print, automation, data processing and postage for more than 20 years.

If you’d like to know more about how we would improve your customer journey or personalised product, do get in touch.

ADDRESS

Prime GroupBurma Road, Blidworth,NottinghamNG21 0RTUnited Kingdom

PHONE

General: +44 (0) 1623 499947Sales: +44 (0) 7966 319340

ONLINE

hello@primegroup.co.ukwww.primegroup.co.uk

We’re the personalisation people.

Prime Group Visor

PRODUCT SPECIFICATIONS

PREMIUM

For product code: PG_Visor-Premium

PROTECTIVE EYEWEAR