PRICE LISTS - Kohler Co. September 1, 2013.pdf · Standard Mower Features: • Overhead Valve •...
Transcript of PRICE LISTS - Kohler Co. September 1, 2013.pdf · Standard Mower Features: • Overhead Valve •...
PRICE LISTS
SUGGESTED LIST PRICES SPARK IGNITED BASIC ENGINES
EFFECTIVE SEPTEMBER 1, 2013
2
Contents Description Page
Gasoline Basic Engines ........................................................................... 3-53 KOHLER® XT Series™..........................................................................3 KOHLER® Courage®.............................................................................4 KOHLER® 7000 Series™.......................................................................5 KOHLER® Confidant™...........................................................................6 KOHLER® Courage Small Horizontal Shaft Engines............................7-8 KOHLER® Command PRO® Vertical Shaft Engines.............................9-12 KOHLER® Command PRO® EFI Vertical Shaft Engines......................13-14 KOHLER® Command PRO® Small Horizontal Shaft Engines..............15-27 KOHLER® Command PRO® Horizontal Shaft Engines........................28-41 KOHLER® Command PRO® EFI Horizontal Shaft Engines..................42-45 KOHLER® Command PRO® Propane/Natural Gas Horizontal.............46-51 KOHLER® Command PRO® Propane/Natural Gas Vertical.................52-53
Prices shown are for Kohler Basic Engines. All other specification prices are available on request from Kohler Co. All prices are in U.S. Dollars, FOB factory, Kohler, Wisconsin, U.S.A., and are subject to change without notice. All engine specifications on this price list are subject to change without notice.
Gasoline engine horsepower ratings exceed Society of Automotive Engineers Small Engine Test Code J1940. Actual engine horsepower is lower and affected by, but not limited to, accessories (air cleaner, exhaust, charging, cooling, fuel pump, etc.), application, engine speed, and ambient operating conditions (temperature, humidity, and altitude). For more information, contact Kohler Co. Engine Engineering Department.
Diesel engine horsepower ratings are provided according to ISO 1585. The diesel automotive power rating is according to ISO 1585. Actual diesel engine horsepower is lower and affected by, but not limited to, accessories (air cleaner, exhaust, charging, cooling, etc.), application, engine speed, and ambient operating conditions (temperature, humidity, and altitude). For more information, contact Kohler Co. Engine Engineering Department.
Miscellaneous Information:
1. All crankshafts rotate counterclockwise when viewed toward the PTO face.
3
6.50, 6.75, and 7.75 ft. lbs. Gross Torque (Vertical Shaft) Single Cylinder
Description Ft. Lbs.
Model
Spec. No.
List Price
Approx. Ship Wt. (lb.)
Standard Mower Features:
• Overhead Valve
• Cast Iron Cylinder Bore
• 149cc Displacement (XT650 & XT675)
• 173cc Displacement (XT775)
• Splash Lubrication
• Accu-FillTM Fuel Tank
• 1.1 Liter Fuel Tank (XT650 & XT675)
• 1.4 Liter Fuel Tank (XT775)
• ¼ Turn, Low-Mount Yellow Dipstick
• Light Weight Flywheel for Lawnmowers
• Fixed Speed @ 3100 rpm
• Internally-Vented Carburetor
• Automotive Style Pleated Air Filter
• Flywheel Brake
• Easy-Pull Recoil Starter with Ergonomic Handle
• Smart-ChokeTM, easy, no prime starting
• Electronic Ignition
• Front Exit Muffler with Guard
• Internal Fuel Filter
• Black Engine Cover and 6-position recoil
• Resistive Spark Plug
• Crankshaft - 25 mm Diameter x 3-5/32” PTO Length, 1/4" Full Key,
2 #505 Woodruff Slots, Drilled and Tapped 3/8"-24 UNF
• SAE J609 Mounting Flange E (8” dia. BC)
• EPA Phase II, CARB Tier II Exhaust Compliant
• RFI Compliant
Please contact product marketing for spec availability
Standard Pressure Washer Features:
• Crankshaft-7/8” (22.225 mm) Diameter x 3
5/32” (80.1688 mm), 2-#505 Woodruff Key
Slots, 3/16” Full Key
• BBC heavy (cast iron) flywheel
• Engine-mounted manual controls
• Engine-mounted rocker control switch
• Foam air filter
• Side-outlet muffler
• Crankshaft-7/8” (22.225 mm) Diameter x 3
5/32” (80.1688 mm), 2-#505 Woodruff Key
Slots, 3/16” Full Key
• EPA Phase III, CARB Tier III Compliant
6.75
7.75
XT675
XT775
XT675-3054
XT775-3000
$253.52
$266.16
24
27
4
15, 17, 18, 19, 20 HP (Vertical Shaft) Single Cylinder
Description
HP
Model
Spec. No.
List Price
Approx. Ship Wt. (lb.)
Standard Features:
• Overhead Valve Design
• Twin Cam Design
• Cross-Flow Cylinder Head
• Inverted Crankcase
• Dual Reciprocating Balance System
• Ported Power Intake
• Fuel Shutdown Solenoid
• Electronic Ignition
• Acoustically Dampened Air Induction
• Full Pressure Lubrication
• Oil Filter
• Extended Oil Fill/Dipstick-Yellow
• Pulse Fuel Pump
• Cast-Iron Cylinder Liner
• 15 Amp Regulated/Rectifier Charging
• Governed Idle
• Unitized Throttle and Choke Control
• Variable Speed Governor
• Large Capacity In-Line Fuel Filter
• Automatic Compression Release
• 12V Bendix Electric Starter
• Crankshaft -1" (25.4 mm) Diameter x 3.16" (80 mm)
PTO Length, 0.25" (6 mm) Keyway, Drilled and Tapped
1.5" (38 mm) Deep, 7/16-20 UNF
• PTO Face-10" (254 mm) Diameter, (4 Holes)
0.35" (8.9 mm) x 1" (25.4 mm) Deep
• EVAP
15 SV471 SV471-3200 $916.00 81
Standard Features Plus
• RFI
18 20
SV541 SV601
SV541-3200 SV601-3201
$976.00 $987.00
81 81
5
22, 23, 24, 25, & 26 HP (Vertical Shaft) Twin Cylinder Description
HP
Model
Spec. No.
List Price
Approx. Ship Wt. (lb.)
Standard Features:
• 1.125” Diameter x 4.36” PTO Length,
7/16-20 Crankshaft
• Cast-Iron Cylinder Liners
• 10” D.B.C., 4 Cored Holes (For OEM Self-Tap)
• Pressure Lubrication
• Standard Oil Filter
• Automotive Style Dipstick (Yellow)
• 7/16” External Square Oil Drain Plug
• Nitrite Exhaust Valves
• 12V Bendix Electric Starter
• 12A Regulated Charging System
• Smart SparkTM Digital Ignition System – KT740 & KT745 only
• RFI/C-tick Compliance
• Modulated Cooling Fan
• Fixed Grass Screen Guard
• Carburetor w/Fuel Shutdown Solenoid
• Pulse Fuel Pump
• 51 Micron Fuel Filter
• Single Wire Controls - Throttle and Choke
• Mechanical Governor
• Torx Head Boden Screws
• Dual Element Air Cleaner
• Standard HP Decal (Black with Silver Lettering)
• Engine Plate with Emission Certification
• Governed Idle Speed 1750 (+150/-250) rpm
• High Speed 3300 (+/- 75) rpm
• Owner’s Manual (English, Spanish & Canadian French)
• Color-Black with Cast Aluminum
• EVAP
20 22 23 24 25 26
KT715 KT725 KT730 KT735 KT740 KT745
KT715-3002 KT725-3001 KT730-3002 KT735-3001 KT740-3002 KT745-3002
$1,112.00 $1,121.00 $1,132.00 $1,141.00 $1,160.00 $1,181.00
85 85 85 85 85 85
Standard Features Plus:
• PRO Performance Filtration Package – air, oil,
and fuel filters. (Note: Platinum spark plug is not
included.)
20 22 23 24 25 26
KT715 KT725 KT730 KT735 KT740 KT745
KT715-3003 KT725-3002 KT730-3003 KT735-3002 KT740-3003 KT745-3003
$1,119.50 $1,128.50 $1,139.50 $1,148.50 $1,167.50 $1,188.50
85 85 85 85 85 85
6
19, 21, 23, 25 HP (Vertical Shaft) Twin Cylinder Description
HP
Model
Spec. No.
List Price
Approx. Ship Wt. (lb.)
Standard Features:
• 1.125” Diameter x 4.36” PTO Length,
7/16-20 Crankshaft
• Cast-Iron Cylinder Liners
• 10” D.B.C., 4 Cored Holes (For OEM Self-Tap)
• Pressure Lubrication
• PRO Performance Air and Oil Filter
• Automotive Style Dipstick (Yellow)
• 7/16” External Square Oil Drain Plug
• Nitrite Exhaust Valves
• 12V Bendix Electric Starter
• 12A Regulated Charging System
• Digital Ignition System – ZT740 only
• Quiet Cam
• RFI/C-tick Compliance
• Modulated Cooling Fan
• Fixed Grass Screen Guard
• Carburetor w/Fuel Shutdown Solenoid
• Pulse Fuel Pump
• PRO Performance Fuel Filter (9-12 micron)
• Single Wire Controls - Throttle and Choke
• Mechanical Governor
• Torx Head Boden Screws
• Standard HP Decal (Black with Silver Lettering)
• Engine Plate with Emission Certification
• Governed Idle Speed 1750 (+150/-250) rpm
• High Speed 3300 (+/- 75) rpm
• Owner’s Manual (English, Spanish & Canadian French)
• Color-Black with Cast Aluminum
• EVAP
19 21 23 25
ZT710 ZT720 ZT730 ZT740
ZT710-3001 ZT720-3001 ZT730-3001 ZT740-3001
$985.00
$1,005.00 $1,025.00 $1,045.00
91 91 91 91
Standard Features Plus:
• Heavy-duty cyclonic air filter
19 21 23 25
ZT710 ZT720 ZT730 ZT740
ZT710-3002 ZT720-3002 ZT730-3002 ZT740-3002
$1,015.00 $1,035.00 $1,055.00 $1,075.00
91 91 91 91
Standard Features Plus:
• Recoil start
19 21
ZT710 ZT720
ZT710-3003 ZT720-3003
$805.00 $835.00
91 91
Standard Features Plus:
• Recoil start
• Heavy-duty cyclonic air filter
19 21
ZT710 ZT720
ZT710-3004 ZT720-3004
$865.00 $885.00
91 91
7
6.5 HP (Horizontal Shaft) Single Cylinder
Description
HP
Model
Spec. No.
List Price*
Approx. Ship Wt. (lb.)
Standard Features:
• Overhead Valve Design
• Electronic Ignition
• Dual Element Air Cleaner (Unless otherwise mentioned)
• Dual Oil Fill Locations
• Dual Oil Drains
• Cast Iron Cylinder Liner
• 3.6 L Metal Fuel Tank with Strainer
• Fuel Shut-off Valve (Unless otherwise mentioned)
• Engine Mounted Throttle and Choke Controls, Remote
Throttle Ready
• Oil SentryTM Switch Installed (No Light)
• Dual Ball Bearings, PTO and Flywheel
• Metal Blower Housing
• Indexable Recoil Starter
• PTO Face
• For engines with SAE crankshaft: 3.625” (92.08 mm) Diameter (4 + 1 Holes) 5/16-24 UNF-2B Thread.
• For engines with Metric crankshaft: 3.625” (92.08 mm) Diameter (4 + 1 Holes) M8x1.25-6H Thread.
• Large Capacity Muffler w/Heat Shield
• Multi-Lingual Owner’s Manual
• Color - Black with Cast Aluminum
• Important Compliance Information:
1.Specs containing -3XXX are CARB Tier III, EPA Phase 3 and RFI compliant (Can be sold globally)
2.Specs containing -0XXX are EU Stage 2 and RFI compliant (For sale in EU, Australia and New Zealand)
3.Specs containing -1XXX do not meet any compliance. These engine cannot be sold in US, Canada, EU,
Australia and New Zealand (For sale in rest of the world)
Standard Features Plus:
• Variable Speed,
• Crankshaft - 0.75” (19.05 mm) Diameter x
2.42” (61.47 mm) PTO Length,
Tapped 5/16-24 UNF
6.5
6.5
6.5
SH265
SH265
SH265
SH265-0011
SH265-1011
SH265-3011
$263.68
40
40
40
Standard Features Plus:
• Crankshaft - 20mm Diameter x 53mm PTO
Length, Tapped M8 x 1.25-6H
6.5
SH265
SH265-0012
40
Standard Features Plus:
• Crankshaft - 3/4” Diameter x 2.38” PTO
Length, Threaded Pump Shaft, Variable
Speed
6.5
6.5
SH265
SH265
SH265-0013
SH265-1013
40
40
Standard Features Plus:
• Crankshaft - 5/8” Diameter x 2.44” PTO
Length, Threaded Pump Shaft, Variable
Speed
6.5
6.5
6.5
SH265
SH265
SH265
SH265-0014
SH265-1014
SH265-3014
$263.68
40
40
40
8
6.5 HP (Horizontal Shaft) Single Cylinder
Description
HP
Model
Spec. No.
List Price*
Approx. Ship Wt. (lb.)
Standard Features Plus:
• Crankshaft - 0.78” Diameter x 2.82” PTO
Length, w/2.25” per foot taper, Fixed Speed
50 Hertz (3150 rpm HSNL),
6.5
6.5
6.5
SH265
SH265
SH265
SH265-0015
SH265-1015
SH265-3015
$263.68
40
40
40
Standard Features Plus:
• Crankshaft - 0.78” Diameter x 2.82” PTO
Length, w/2.25” per foot taper, Fixed Speed
60 Hertz (3750 rpm HSNL)
6.5
6.5
6.5
SH265
SH265
SH265
SH265-0016
SH265-1016
SH265-3016
$263.68
40
40
40
Standard Features Plus:
• Variable Speed,
• Crankshaft - 0.75” (19.05 mm) Diameter x
2.42” (61.47 mm) PTO Length,
Tapped 5/16-24 UNF
• Recoil and electric start with key box and
3 amp charging
6.5
6.5
SH265
SH265
SH265-0021
SH265-3021
$371.98
46
46
Standard Features Plus:
• Variable Speed,
• Crankshaft - 0.75” (19.05 mm) Diameter x
2.42” (61.47 mm) PTO Length,
Tapped 5/16-24 UNF
• Recoil and electric start with key box and
10 amp charging
6.5
6.5
SH265
SH265
SH265-0031
SH265-3031
$382.81
46
46
Standard Features Plus:
• Crankshaft - 0.78” Diameter x 2.82” PTO
Length, w/2.25” per foot taper, Fixed Speed
50 Hertz (3150 rpm HSNL)
• Low Profile Air Cleaner
• No Fuel Tank, No fuel shut-off valve
• No Muffler
6.5
6.5
SH265
SH265
SH265-0055
SH265-1055
33
33
Standard Features Plus:
• Crankshaft - 0.78” Diameter x 2.82” PTO
Length, w/2.25” per foot taper, Fixed Speed
60 Hertz (3750 rpm HSNL)
• Low Profile Air Cleaner
• No Fuel Tank, No fuel shut-off valve
• No Muffler
6.5
6.5
SH265
SH265
SH265-0056
SH265-3056
$242.02
33
33
Note: Contact your source of supply for pricing.
9
20.5-25 HP (Vertical Shaft) V-Twin
Description
HP
Model
Spec. No.
List Price
Approx. Ship Wt. (lb.)
Standard Features:
• Overhead Valve Design
• Hydraulic Valve Lifters
• Electronic Ignition
• Cast-Iron Cylinder Liners
• PTO Sleeve Bearing (Side Load)
• Digital Spark Advance System (27 HP)
• Large Capacity Dual Element Air Cleaner
• Closed Breather System
• High Efficiency Grass Screen and Fan
• Stellite® Exhaust Valves
• Full Pressure Lubrication
• Large Capacity In-Line Fuel Filter
• Easy Access Fill Tube and Dipstick-Yellow
• Large Capacity Oil Filter
• Dual Oil Drain
• Oil Sentry™ (Switch Installed and Wired- Unconnected)
• Canister Muffler with Heat Shield, Oil Filter Side Outlet
• Variable Speed Governor
• High Performance Accelerator Pump Carburetor
• Fuel Shutdown Solenoid
• Smart-Choke™ Carburetor
• Pulse Fuel Pump
• High Performance Spark Plugs
• 12 Volt Solenoid Shift Starter
• 20 Amp Alternator, Regulated
• Crankshaft (18-22 HP)-1" (25.4 mm) Diameter x 3.16" (80 mm)
PTO Length, 0.25" (6 mm) Keyway, Drilled and Tapped 1.5" (38 mm) Deep, 7/16-20 UNF
• Crankshaft (25-27 HP)-1.125" (28.5 mm)
Diameter x 3.16" (80 mm) PTO Length, 0.25"
(6 mm) Keyway, Drilled and Tapped
1.5" (38 mm) Deep, 7/16-20 UNF
• PTO Face-10" (254 mm) Diameter, 4
Through Holes, 0.36" (9 mm) Diameter
Color-Black with Cast Aluminum
• 3/16” Evaporative emissions connection
20.5
23.5
25
CV640
CV730
CV740
CV640-3004
CV730-3101
CV740-3001
$1,706.94
$2,007.23
$2,166.61
108
108
108
Standard Features Plus:
• Universal Commercial Mowing Replacement
Engine
• Special Chopper Grass Screen and Fixed
Guard
• No Exhaust System-Studs, Nuts, and
Gaskets only
NR*
CV680
CV680-3002
$1,770.59
106
*NR = not rated
10
20.5-25 HP (Vertical Shaft) V-Twin
Description
HP
Model
Spec. No.
List Price
Approx. Ship Wt. (lb.)
Standard Features:
• Overhead Valve Design
• Hydraulic Valve Lifters
• Electronic Ignition
• Cast-Iron Cylinder Liners
• PTO Sleeve Bearing (Side Load)
• Dual Element Air Cleaner
• Closed Breather System
• High Efficiency Grass Screen and Fan
• Stellite® Exhaust Valves
• Full Pressure Lubrication
• Large Capacity In-Line Fuel Filter
• Easy Access Fill Tube and Dipstick-Yellow
• Dual Oil Drain
• Variable Speed Governor
• Fuel Shutdown Solenoid
• Smart-Choke™ Carburetor
• Pulse Fuel Pump
• 12 Volt Solenoid Shift Starter
• 15 Amp Alternator, Regulated
• Crankshaft 1" (25.4 mm) Diameter x 3.16" (80 mm)
PTO Length, 0.25" (6 mm) Keyway, Drilled and Tapped 1.5" (38 mm) Deep, 7/16-20 UNF
• 3/16” Evaporative emissions connection
• No exhaust system Studs, Nuts, and Gaskets
Only
• Lawn Tractor spec
19
20.5
CV620
CV640
CV620-3002
CV640-3005
$1,266.21
$1,503.26
108
108
11
27 HP (Vertical Shaft) V-Twin
Description
HP
Model
Spec. No.
List Price
Approx. Ship Wt. (lb.)
Standard Features:
• Overhead Valve Design
• Hydraulic Valve Lifters
• Electronic Ignition
• Cast-Iron Cylinder Liners
• PTO Sleeve Bearing (Side Load)
• Digital Spark Advance System
• Heavy Duty Canister Air Cleaner System
• Closed Breather System
• High Efficiency Grass Screen and Fan
• Stellite® Exhaust Valves
• Full Pressure Lubrication
• Large Capacity In-Line Fuel Filter
• Easy Access Fill Tube and Dipstick-Yellow
• Large Capacity Oil Filter
• Dual Oil Drain
• Oil Sentry™ (Switch Installed and Wired- Unconnected)
• Canister Muffler with Heat Shield, Oil Filter Side Outlet
• Variable Speed Governor
• Two-Barrel Carburetor
• Fuel Shutdown Solenoid
• Smart-Choke™ Carburetor
• Pulse Fuel Pump
• High Performance Spark Plugs
• 12 Volt Solenoid Shift Starter
• 20 Amp Alternator, Regulated
• Crankshaft - 1.125" (28.5 mm) Diameter x 3.16" (80 mm) PTO Length,
0.25" (6 mm) Keyway, Drilled and Tapped 1.5" (38 mm) Deep, 7/16-20 UNF
• PTO Face - 10" (254 mm) Diameter, 4 Through Holes, 0.36" (9 mm) Diameter
Color-Black with Cast Aluminum
• 3/16” Evaporative emissions connection
Standard Features Plus:
• Special Chopper Grass Screen and Fixed
Guard
27
CV752
CV752-3000
$2,422.09
110
12
35 HP (Vertical Shaft) V-Twin
Description
HP
Model
Spec. No.
List Price
Approx. Ship Wt. (lb.)
Standard Features:
• Overhead Valve Design
• Hydraulic Valve Lifters
• Nylon Cam Gear
• Cast-Iron Cylinder Liners
• Stellite® Exhaust Valves
• Flywheel and PTO Sleeve Bearings
• Electronic Ignition
• High Performance Spark Plugs RFI and EMC Compliant
• Full Pressure Lubrication
• Top Mount Spin-On Large Capacity Oil Filter
• Large Dual Oil Drains
• Heavy Duty Canister Air Cleaner System
• High Efficiency Grass Screen and Fan
• Fixed Grass Screen Guard
• Blower Housing with Removable Cylinder Access Covers
• Easy Access Dipstick and Oil Fill-Yellow
• Oil Sentry™ (Switch Installed but Unconnected)
• Variable Speed Governor
• Top Mounted Remote Controls (for boden wire connection)
• Closed Breather System
• Two-Barrel Carburetor
• Fuel Shutdown Solenoid
• Smart-Choke™ Carburetor
• Pulse Fuel Pump
• Large Capacity In-Line Fuel Filter
• 12 Volt Solenoid Shift Starter
• 20 Amp Alternator, Regulated
• Crankshaft-1.125" (28.5 mm) Diameter x 3.16" (80 mm) PTO Length,
0.25" (6 mm) Keyway, Drilled and Tapped 1.5" (38 mm) Deep, 7/16-20 UNF
• PTO Face-10" (254 mm) Diameter, (4 Holes) M8 x 1.25
• Canister Muffler with Heat Shield, Opposite Starter Side Outlet
• Color-Black with Cast Aluminum
• 3/16” Evaporative emissions connection
35 CV980 CV980-2002 $2,651.96 127
Standard Features Plus
• SAI
• Muffler (starter side exhaust outlet)
35
CV980
CV980-2004
$2,874.93
127
Standard Features Plus
• SAI
• Muffler (center exhaust outlet)
35
CV980
CV980-2005
$2,874.93
127
Standard Features Plus
• SAI
• Muffler (opposite starter side)
35
CV980
CV980-2006
$2,874.93
127
Exhaust System Kits
Kit/Part No. Description List Price
62 786 04-S 62 786 05-S 62 786 06-S
PTO Canister Muffler Kit-Center Outlet (Includes Muffler) .......................................... $144.56 PTO Canister Muffler Kit-Starter Side Outlet (Includes Muffler) .................................. $144.56 PTO Canister Muffler Kit-Opposite Starter Side Outlet (Includes Muffler)................... $144.56
13
23 & 26.5 HP (Vertical Shaft) V-Twin
Description
HP
Model
Spec. No.
List Price
Approx. Ship Wt. (lb.)
Standard Features:
• Overhead Valve Design
• Hydraulic Valve Lifters
• Cast-Iron Cylinder Liners
• PTO Sleeve Bearing (Side Load)
• Electronic Ignition
• Heavy Duty Canister Air Cleaner System (Kohler)
• High Efficiency Grass Screen and Fan
• Closed Breather System
• Stellite® Exhaust Valves
• Full Pressure Lubrication
• In-Line Fuel Filter
• Easy Access Fill Tube and Dipstick-Yellow
• Large Capacity Oil Filter, Dual Oil Drain
• Oil Sentry™
• Variable Speed Governor
• Pulse Fuel Pump
• High Performance Spark Plugs
• 12 Volt Solenoid Shift Starter
• Crankshaft-1"(25.4 mm) Diameter x 3.16" (80 mm) PTO Length,
0.25" (6 mm) Keyway, Drilled and Tapped 1.5" (38 mm) Deep, 7/16-20 UNF
• PTO Face-10" (254 mm) Diameter, 4 through holes, 0.36” (9 mm) Diameter
• Color-Black with Cast Aluminum
• Special Chopper Grass Screen and Fixed Guard
• 20 Amp Alternator, Regulated
• 3/16” Evaporative emissions connection
• No Exhaust System-Studs, Nuts, and Gaskets Only
• Oxygen Sensor
• See page 45 for Exhaust System Kits
23 ECV730 ECV730-3003 $2,080.52 112
Standard Features Plus:
• Crankshaft- 1.125” x 4.00” tapped 7/16-20
• Metal Chopper Grass Screen and Guard
23
ECV730
ECV730-3001
$2,068.60
120
Standard Features Plus:
• Crankshaft-1.125" (28.5 mm) Diameter x 4.0"
(102 mm) PTO Length, 0.25" (6 mm) Keyway,
Drilled and Tapped 1.5" (38 mm) Deep, 7/16-
20 UNF
26.5
ECV749
ECV749-3001
$2,613.35
120
14
23 & 26.5 HP (Vertical Shaft) V-Twin
Description
HP
Model
Spec. No.
List Price
Approx. Ship Wt. (lb.)
Standard Features:
• Overhead Valve Design
• Hydraulic Valve Lifters
• Cast-Iron Cylinder Liners
• PTO Sleeve Bearing (Side Load)
• Electronic Ignition
• Low Profile Air Cleaner
• High Efficiency Grass Screen and Fan
• Closed Breather System
• Stellite® Exhaust Valves
• Full Pressure Lubrication
• In-Line Fuel Filter
• Easy Access Fill Tube and Dipstick-Yellow
• Large Capacity Oil Filter, Dual Oil Drain
• Oil Sentry™
• Variable Speed Governor
• Pulse Fuel Pump
• High Performance Spark Plugs
• 12 Volt Solenoid Shift Starter
• Crankshaft-1.125" (28.5 mm) Diameter x 3.84" (80 mm) PTO
Length, 0.25" (6 mm) Keyway, Drilled and Tapped 1.5" (38
mm) Deep, 7/16-20 UNF
• PTO Face-10" (254 mm) Diameter, 4 through holes, 0.36” (9 mm) Diameter
• Color-Black with Cast Aluminum
• Metal Chopper Grass Screen and Fixed Guard
• 20 Amp Alternator, Regulated
• 3/16” Evaporative emissions connection
• No Exhaust System-Studs, Nuts, and Gaskets Only
• Oxygen Sensor
• See page 45 for Exhaust System Kits
23
26.5
ECV730
ECV749
ECV730-3002
ECV749-3002
$2,038.23
$2,550.91
120
120
15
7 HP (Horizontal Shaft) Single Cylinder
Description
HP
Model
Spec. No.
List Price*
Approx. Ship Wt. (lb.)
Standard Features:
• Overhead Valve Design
• Electronic Ignition
• Quad-CleanTM 4-Stage All-Season Heavy Duty Cyclonic
Air Cleaner (Unless otherwise mentioned)
• Dual Oil Fill Locations and Oil Drains
• Cast Iron Cylinder Liner
• 4.1 L Metal Tank w/Strainer
• Fuel Shut-off Valve (Unless otherwise mentioned)
• Stellite® Exhaust Valve
• Engine Mounted Throttle and Choke Controls, Remote
Throttle Ready
• Oil SentryTM Switch Installed (No Light)
• Dual Ball Bearings, PTO and Flywheel
• Metal Blower Housing
• Indexable Recoil Starter
• PTO Face
• For engines with SAE crankshaft: 3.625” (92.08 mm) Diameter (4 + 1 Holes) 5/16-24 UNF-2B x 15 deep
• For engines with Metric crankshaft: 3.625” (92.08 mm) Diameter (4 + 1 Holes) M8x1.25-6H x 15 deep
• Large Capacity Muffler w/Heat Shield and Spark Arrestor
• Multi-language Owner’s
• Color - Black with Cast Aluminum
• Important Compliance Information:
1.Specs containing -3XXX are CARB Tier III, EPA Phase 3 and RFI compliant (Can be sold globally)
2.Specs containing -0XXX are EU Stage 2 and RFI compliant (For sale in EU, Australia and New Zealand)
3.Specs containing -1XXX do not meet any compliance. These engine cannot be sold in US, Canada, EU,
Australia and New Zealand (For sale in rest of the world)
Standard Features Plus:
• Crankshaft - 3/4” Diameter x 2.42” PTO
Length, Straight Shaft w/Keyway
• Variable Speed
7
7
7
CH270
CH270
CH270
CH270-0011
CH270-1011
CH270-3011
$374.98
45
45
45
Standard Features Plus:
• Crankshaft - 20mm Diameter x 53mm PTO
Length, Straight Shaft w/Keyway
• Variable Speed
7
7
7
CH270
CH270
CH270
CH270-0012
CH270-1012
CH270-3012
$374.98
45
45
45
Standard Features Plus:
• Crankshaft - 3/4” Diameter x 2.41” PTO
Length, Straight Shaft w/Threads
• Variable Speed
7
7
7
CH270
CH270
CH270
CH270-0013
CH270-1013
CH270-3013
$374.98
45
45
45
Standard Features Plus:
• Crankshaft - 5/8” Diameter x 2.44” PTO
Length, Threaded Pump Shaft
• Variable Speed
7
7
7
CH270
CH270
CH270
CH270-0014
CH270-1014
CH270-3014
$374.98
45
45
45
16
7 HP (Horizontal Shaft) Single Cylinder
Description
HP
Model
Spec. No.
List Price*
Approx. Ship Wt. (lb.)
Standard Features Plus:
• Crankshaft - 0.78” Diameter x 2.82” PTO
Length, w/2.25” per foot Taper Shaft
• Fixed Speed, 50 Hertz (3150 rpm HSNL)
7
7
CH270
CH270
CH270-0015
CH270-1015
45
45
Standard Features Plus:
• Crankshaft - 0.78” Diameter x 2.82” PTO
Length, w/2.25” per foot Taper Shaft
• Fixed Speed, 50 Hertz (3150 rpm HSNL)
7
7
7
CH270
CH270
CH270
CH270-0016
CH270-1016
CH270-3016
$374.98
45
45
45
Standard Features Plus:
• Crankshaft - 20mm Diameter x 53mm PTO
Length, Straight Shaft w/Keyway
• Variable Speed
• 2:1 Gear Reduction
7
7
CH270
CH270
CH270-0017
CH270-3017
$417.62
45
45
Standard Features Plus:
• Crankshaft - 3/4” Diameter x 2.42” PTO
Length, Straight Shaft w/Keyway
• Variable Speed
• Recoil and electric start with key box and
3 amp charging
7
7
CH270
CH270
CH270-0021
CH270-3021
$481.58
52
52
Standard Features Plus:
• Crankshaft - 0.78” Diameter x 2.82” PTO
Length, w/2.25” per foot Taper Shaft
• Fixed Speed, 50 Hertz (3150 rpm HSNL)
• Recoil and electric start with key box and
3 amp charging
7
CH270
CH270-0025
52
Standard Features Plus:
• Crankshaft - 3/4” Diameter x 2.42” PTO
Length, Straight Shaft w/Keyway
• Variable Speed
• Recoil and electric start with key box and
10 amp charging
7
7
CH270
CH270
CH270-0031
CH270-3031
$513.56
52
52
Standard Features Plus:
• Crankshaft - 20mm Diameter x 53mm PTO
Length, Straight Shaft w/Keyway
• Variable Speed
• Recoil and electric start with key box and
10 amp charging
7
CH270
CH270-3032
$513.56
52
17
7 HP (Horizontal Shaft) Single Cylinder
Description
HP
Model
Spec. No.
List Price*
Approx. Ship Wt. (lb.)
Standard Features Plus:
• Crankshaft - 3/4” Diameter x 2.41” PTO
Length, Threaded Pump Shaft
• Variable Speed
• Recoil and electric start with key box and
10 amp charging
7
CH270
CH270-3033
$513.56
52
Standard Features Plus:
• Crankshaft - 0.78” Diameter x 2.82” PTO
Length, w/2.25” per foot Taper Shaft
• Fixed Speed, 50 Hertz (3150 rpm HSNL)
• Recoil and electric start with key box and
10 amp charging
7
CH270
CH270-0035
52
Standard Features Plus:
• Crankshaft - 0.78” Diameter x 2.82” PTO
Length, w/2.25” per foot Taper Shaft
• Fixed Speed, 50 Hertz (3150 rpm HSNL)
• Low Profile Air Cleaner
• No Fuel Tank, No fuel shut-off valve
• No Muffler
7
7
CH270
CH270
CH270-0055
CH270-1055
37
37
Standard Features Plus:
• Crankshaft - 0.78” Diameter x 2.82” PTO
Length, w/2.25” per foot Taper Shaft
• Fixed Speed, 60 Hertz (3750 rpm HSNL)
• Low Profile Air Cleaner
• No Fuel Tank, No fuel shut-off valve
• No Muffler
7
7
CH270
CH270
CH270-0056
CH270-3056
$353.66
37
37
Standard Features Plus:
• Crankshaft - 0.78” Diameter x 2.82” PTO
Length, w/2.25” per foot Taper Shaft
• Fixed Speed, 50 Hertz (3150 rpm HSNL)
• Low Profile Air Cleaner
• Recoil and electric start with key box and
3 amp charging
• No Fuel Tank, No fuel shut-off valve
• No Muffler
7
7
CH270
CH270
CH270-0065
CH270-1065
37
37
Standard Features Plus:
• Crankshaft - 0.78” Diameter x 2.82” PTO
Length, w/2.25” per foot Taper Shaft
• Fixed Speed, 60 Hertz (3750 rpm HSNL)
• Low Profile Air Cleaner
• Recoil and electric start with key box and
3 amp charging
• No Fuel Tank, No fuel shut-off valve
• No Muffler
7
CH270
CH270-3066
$460.26
37
18
7 HP (Horizontal Shaft) Single Cylinder
Description
HP
Model
Spec. No.
List Price*
Approx. Ship Wt. (lb.)
Standard Features Plus:
• Crankshaft - 0.78” Diameter x 2.82” PTO
Length, w/2.25” per foot Taper Shaft
• Fixed Speed, 60 Hertz (3750 rpm HSNL)
• Low Profile Air Cleaner
• Recoil and electric start with key box and
10 amp charging
• No Fuel Tank, No fuel shut-off valve
• No Muffler
7
CH270
CH270-3076
$470.92
37
Standard Features Plus:
• Crankshaft - 3/4” Diameter x 2.42” PTO
Length, Straight Shaft w/Keyway
• Variable Speed
• Remote throttle only
7
CH270
CH270-3105
$374.98
37
Standard Features Plus:
• Crankshaft – 22mm Diameter x 72mm
Length, with 4.75 mm key
7
CH270
CH270-3118
$374.98
37
Standard Features Plus:
• 2:1 wet clutch gear box
• Output crankshaft – 22mm Diameter x
52.5mm Length
7
CH270
CH270-3018
$544.62
57
Standard Features Plus:
• 2:1 wet clutch gear box
• Output crankshaft – 22mm Diameter x
52.5mm Length
• Recoil and electric start with key box and
3 amp charging
7
CH270
CH270-3028
$644.62
62
Standard Features Plus:
• 2:1 wet clutch gear box
• Output crankshaft – 22mm Diameter x
52.5mm Length
• Recoil and electric start with key box and
10 amp charging
7
CH270
CH270-3038
$654.62
62
Standard Features Plus:
• 6:1 gear box
• Output crankshaft – 19mm Diameter x
50.9mm Length
7
CH270
CH270-3019
$514.62
52
Standard Features Plus:
• 6:1 gear box
• Output crankshaft – 19mm Diameter x
50.9mm Length
• Recoil and electric start with key box and
3 amp charging
7
CH270
CH270-3029
$614.62
57
Standard Features Plus:
• 6:1 gear box
• Output crankshaft – 19mm Diameter x
50.9mm Length
• Recoil and electric start with key box and
10 amp charging
7
CH270
CH270-3039
$624.62
57
19
9.5 HP (Horizontal Shaft) Single Cylinder
Description
HP
Model
Spec. No.
List Price*
Approx. Ship Wt. (lb.)
Standard Features:
• Overhead Valve Design
• Electronic Ignition
• Quad-CleanTM 4-Stage All-Season Heavy Duty Cyclonic
Air Cleaner (Unless otherwise mentioned)
• Dual Oil Fill Locations and Oil Drains
• Cast Iron Cylinder Liner
• 7 L Metal Tank w/Strainer
• Fuel Shut-off Valve (Unless otherwise mentioned)
• Stellite® Exhaust Valve
• Engine Mounted Throttle and Choke Controls, Remote
Throttle Ready
• Oil SentryTM Switch Installed (No Light)
• Dual Ball Bearings, PTO and Flywheel
• Balance Shaft
• Metal Blower Housing
• Indexable Recoil Starter
• PTO Face
• For engines with SAE crankshaft: 6.5” (165.1mm) Diameter Bolt Circle (4 Holes) 3/8-16 UNC thread x
0.71” deep and 5” (127 mm) Diameter Bolt Circle (4 + 2 Holes) 5/16-24 UNF threads x 0.71” deep
• For engines with metric crankshaft: 6.5” (165.1mm) Diameter Bolt Circle (4 Holes) 3/8-16 UNC thread x
0.71” deep and 5” (127 mm) Diameter Bolt Circle (4 + 2 Holes) M8 x 1.25-6H threads x 18mm deep
• Large Capacity Muffler w/Heat Shield and Spark Arrestor
• Multi-language Owner’s Manual
• Color - Black with Cast Aluminum
• Important Compliance Information:
1.Specs containing -3XXX are CARB Tier III, EPA Phase 3 and RFI compliant (Can be sold globally)
2.Specs containing -0XXX are EU Stage 2 and RFI compliant (For sale in EU, Australia and New Zealand)
3.Specs containing -1XXX do not meet any compliance. These engine cannot be sold in US, Canada, EU,
Australia and New Zealand (For sale in rest of the world)
Standard Features Plus:
• Crankshaft - 1.0” (25.4 mm) Diameter x 3.49”
(88.61 mm) PTO Length, Tapped 7/16-20
UNF
• Variable speed
9.5
9.5
9.5
CH395
CH395
CH395
CH395-0011
CH395-1011
CH395-3011
$527.67
69
69
69
Standard Features Plus:
• Crankshaft - 1” Diameter x 3.51” PTO Length,
Threaded Pump Shaft
• Variable speed
9.5
9.5
9.5
CH395
CH395
CH395
CH395-0014
CH395-1014
CH395-3014
$527.67
69
69
69
Standard Features Plus:
• Crankshaft - 0.87” Diameter x 4.18” PTO
Length, w/2.25” per foot Taper Shaft
• Fixed Speed, 50 Hertz (3150 rpm HSNL)
9.5
9.5
CH395
CH395
CH395-0015
CH395-1015
69
69
Standard Features Plus:
• Crankshaft - 0.87” Diameter x 4.18” PTO
Length, w/2.25” per foot Taper Shaft
• Fixed Speed, 60 Hertz (3750 rpm HSNL)
9.5
9.5
CH395
CH395
CH395-0016
CH395-3016
$527.67
69
69
20
9.5 HP (Horizontal Shaft) Single Cylinder
Description
HP
Model
Spec. No.
List Price*
Approx. Ship Wt. (lb.)
Standard Features Plus:
• Crankshaft - 1.0” (25.4 mm) Diameter x 3.49”
(88.61 mm) PTO Length, Tapped 7/16-20
UNF
• Variable speed
• Recoil and electric start with key box and
3 amp charging
9.5
9.5
CH395
CH395
CH395-0021
CH395-3021
$644.93
82
82
Standard Features Plus:
• Crankshaft - 1” Diameter x 3.51” PTO
Length, Threaded Pump Shaft
• Variable Speed
• Recoil and electric start with key box and
3 amp charging
9.5
9.5
CH395
CH395
CH395-0024
CH395-3024
$644.93
82
82
Standard Features Plus:
• Crankshaft - 0.87” Diameter x 4.18” PTO
Length, w/2.25” per foot Taper Shaft
• Fixed Speed, 50 Hertz (3150 rpm HSNL)
• Recoil and electric start with key box and
3 amp charging
9.5
CH395
CH395-0025
82
Standard Features Plus:
• Crankshaft - 0.87” Diameter x 4.18” PTO
Length, w/2.25” per foot Taper Shaft
• Fixed Speed, 60 Hertz (3750 rpm HSNL)
• Recoil and electric start with key box and
3 amp charging
9.5
9.5
CH395
CH395
CH395-0026
CH395-3026
$644.93
82
82
Standard Features Plus:
• Crankshaft - 1.0” (25.4 mm) Diameter x 3.49”
(88.61 mm) PTO Length, Tapped 7/16-20
UNF
• Variable speed
• Recoil and electric start with key box and
10 amp charging
9.5
9.5
9.5
CH395
CH395
CH395
CH395-0031
CH395-1031
CH395-3031
$676.91
82
82
82
Standard Features Plus:
• Crankshaft - 1.0” (25.4 mm) Diameter x 3.49”
(88.61 mm) PTO Length, Tapped 7/16-20
UNF
• Variable speed
• Recoil and electric start with key box and
18 amp charging
9.5
9.5
CH395
CH395
CH395-0041
CH395-3041
$708.89
82
82
Standard Features Plus:
• Crankshaft - 25mm Diameter x 63.2 PTO
Length
• Variable speed
• Recoil and electric start with key box and
10 amp charging
9.5
CH395
CH395-0032
82
21
9.5 HP (Horizontal Shaft) Single Cylinder
Description
HP
Model
Spec. No.
List Price*
Approx. Ship Wt. (lb.)
Standard Features Plus:
• Crankshaft - 0.87” Diameter x 4.18” PTO
Length, w/2.25” per foot Taper Shaft
• Fixed Speed, 50 Hertz (3150 rpm HSNL)
• Low Profile Air Cleaner
• No Fuel Tank, No fuel shut-off valve
• No Muffler
9.5
9.5
CH395
CH395
CH395-0055
CH395-1055
55
55
Standard Features Plus:
• Crankshaft - 0.87” Diameter x 4.18” PTO
Length, w/2.25” per foot Taper Shaft
• Fixed Speed, 60 Hertz (3750 rpm HSNL)
• Low Profile Air Cleaner
• No Fuel Tank, No fuel shut-off valve
• No Muffler
9.5
9.5
9.5
CH395
CH395
CH395
CH395-0056
CH395-1056
CH395-3056
$501.02
55
55
55
Standard Features Plus:
• Crankshaft - 0.87” Diameter x 4.18” PTO
Length, w/2.25” per foot Taper Shaft
• Fixed Speed, 50 Hertz (3150 rpm HSNL)
• Low Profile Air Cleaner
• Recoil and electric start with key box and
3 amp charging
• No Fuel Tank, No fuel shut-off valve
• No Muffler
9.5
9.5
CH395
CH395
CH395-0065
CH395-1065
64
64
Standard Features Plus:
• Crankshaft - 0.87” Diameter x 4.18” PTO
Length, w/2.25” per foot Taper Shaft
• Fixed Speed, 60 Hertz (3750 rpm HSNL)
• Low Profile Air Cleaner
• Recoil and electric start with key box and
3 amp charging
• No Fuel Tank, No fuel shut-off valve
• No Muffler
9.5
CH395
CH395-3066
$639.60
64
Standard Features Plus:
• Crankshaft - 1.0” (25.4 mm) Diameter x 3.49”
(88.61 mm) PTO Length, Tapped 7/16-20
UNF
• Variable speed
• Remote throttle only
9.5
CH395
CH395-3102
$527.67
64
Standard Features Plus:
• Crankshaft - 1” Diameter x 3.51” PTO Length,
Threaded Pump Shaft
• Variable speed
• Remote throttle only
9.5
CH395
CH395-3103
$527.67
64
Standard Features Plus:
• Crankshaft – 23mm with 1:5 Conical
Taper
• Metric Closure Plates
• Exhaust Deflector (loosed packed)
• Exhaust Pipe Protector (loosed packed)
• Barrel Connector/Braided Throttle
9.5
CH395
CH395-3111
$548.99
64
22
9.5 HP (Horizontal Shaft) Single Cylinder
Description
HP
Model
Spec. No.
List Price*
Approx. Ship Wt. (lb.)
Standard Features Plus:
• Crankshaft – 23mm with 1:5 Conical
Taper
• Metric Closure Plates
• Exhaust Deflector (loosed packed)
• Exhaust Pipe Protector (loosed packed)
• Barrel Connector/Braided Throttle
• Electric Start with 18 amp Charging System
9.5
CH395
CH395-3112
$740.879
64
Standard Features Plus:
• 2:1 wet clutch gear box
• Output crankshaft – 22mm Diameter x
52.5mm Length
9.5
CH395
CH395-3018
$852.67
82
Standard Features Plus:
• 2:1 wet clutch gear box
• Output crankshaft – 22mm Diameter x
52.5mm Length
• Recoil and electric start with key box and
3 amp charging
9.5
CH395
CH395-3028
$982.67
88
Standard Features Plus:
• 2:1 wet clutch gear box
• Output crankshaft – 22mm Diameter x
52.5mm Length
• Recoil and electric start with key box and
10 amp charging
9.5
CH395
CH395-3038
$992.67
88
Standard Features Plus:
• 2:1 wet clutch gear box
• Output crankshaft – 22mm Diameter x
52.5mm Length
• Recoil and electric start with key box and
18 amp charging
9.5
CH395
CH395-3048
$1,002.67
88
Standard Features Plus:
• 6:1 gear box
• Output crankshaft – 25.4mm Diameter x
73.3mm Length
9.5
CH395
CH395-3019
$777.67
78
Standard Features Plus:
• 6:1 gear box
• Output crankshaft – 25.4mm Diameter x
73.3mm Length
• Recoil and electric start with key box and
3 amp charging
9.5
CH395
CH395-3029
$982.67
84
Standard Features Plus:
• 6:1 gear box
• Output crankshaft – 25.4mm Diameter x
73.3mm Length
• Recoil and electric start with key box and
10 amp charging
9.5
CH395
CH395-3039
$992.67
84
Standard Features Plus:
• 6:1 gear box
• Output crankshaft – 25.4mm Diameter x
73.3mm Length
• Recoil and electric start with key box and
18 amp charging
9.5
CH395
CH395-3049
$1,002.67
84
23
14 HP (Horizontal Shaft) Single Cylinder
Description
HP
Model
Spec. No.
List Price*
Approx. Ship Wt. (lb.)
Standard Features:
• Overhead Valve Design
• Electronic Ignition
• Quad-CleanTM 4-Stage All-Season Heavy Duty Cyclonic
Air Cleaner (Unless otherwise mentioned)
• Dual Oil Fill Locations and Oil Drains
• Cast Iron Cylinder Liner
• 7 L Metal Tank w/Strainer
• Fuel Shut-off Valve (Unless otherwise mentioned)
• Stellite® Exhaust Valve
• Engine Mounted Throttle and Choke Controls, Remote
Throttle Ready
• Oil SentryTM Switch Installed (No Light)
• Dual Ball Bearings, PTO and Flywheel
• Balance Shaft
• Metal Blower Housing
• Indexable Recoil Starter
• PTO Face
• For engines with SAE crankshaft: 6.5” (165.1mm) Diameter Bolt Circle (4 Holes) 3/8-16 UNC thread x 0.71”
deep and 5” (127 mm) Diameter Bolt Circle (4 + 2 Holes) 5/16-24 UNF threads x 0.71” deep
• For engines with metric crankshaft: 6.5” (165.1mm) Diameter Bolt Circle (4 Holes) 3/8-16 UNC thread x
0.71” deep and 5” (127 mm) Diameter Bolt Circle (4 + 2 Holes) M8 x 1.25-6H threads x 18mm deep
• Large Capacity Muffler w/Heat Shield and Spark Arrestor
• Multi-language Owner’s Manual
• Color - Black with Cast Aluminum
• Important Compliance Information:
1.Specs containing -3XXX are CARB Tier III, EPA Phase 3 and RFI compliant (Can be sold globally)
2.Specs containing -0XXX are EU Stage 2 and RFI compliant (For sale in EU, Australia and New Zealand)
3.Specs containing -1XXX do not meet any compliance. These engine cannot be sold in US, Canada, EU,
Australia and New Zealand (For sale in rest of the world)
Standard Features Plus:
• Crankshaft - 1.0” (25.4 mm) Diameter x 3.49”
(88.61 mm) PTO Length,
Tapped 3/8-24 UNF
• Variable Speed
14
14
14
CH440
CH440
CH440
CH440-0011
CH440-1011
CH440-3011
$639.60
87
87
87
Standard Features Plus:
• Crankshaft - 1” Diameter x 3.51” PTO
Length, Threaded Pump Shaft
• Variable Speed
14
14
14
CH440
CH440
CH440
CH440-0014
CH440-1014
CH440-3014
$639.60
87
87
87
Standard Features Plus:
• Crankshaft - 0.87” Diameter x 4.18” PTO
Length, w/2.25” per foot Taper Shaft
• Fixed Speed, 50 Hertz (3150 rpm HSNL)
14
14
CH440
CH440
CH440-0015
CH440-1015
87
87
Standard Features Plus:
• Crankshaft - 0.87” Diameter x 4.18” PTO
Length, w/2.25” per foot Taper Shaft
• Fixed Speed, 50 Hertz (3150 rpm HSNL)
14
14
CH440
CH440
CH440-0016
CH440-3016
$639.60
87
87
24
14 HP (Horizontal Shaft) Single Cylinder Description
HP
Model
Spec. No.
List Price*
Approx. Ship Wt. (lb.)
Standard Features Plus:
• Crankshaft - 1.0” (25.4 mm) Diameter x 3.49”
(88.61 mm) PTO Length,
Tapped 3/8-24 UNF
• Recoil and electric start with key box and
3 amp charging
• Variable Speed
14
14
CH440
CH440
CH440-0021
CH440-3021
$767.52
99
99
Standard Features Plus:
• Crankshaft - 1” Diameter x 3.51” PTO
Length, Threaded Pump Shaft
• Recoil and electric start with key box and
3 amp charging
• Variable Speed
14
14
CH440
CH440
CH440-0024
CH440-3024
$767.52
99
99
Standard Features Plus:
• Crankshaft - 0.87” Diameter x 4.18” PTO
Length, w/2.25” per foot Taper Shaft
• Recoil and electric start with key box and
3 amp charging
• Fixed Speed, 50 Hertz (3150 rpm HSNL)
14
CH440
CH440-0025
99
Standard Features Plus:
• Crankshaft - 0.87” Diameter x 4.18” PTO
Length, w/2.25” per foot Taper Shaft
• Recoil and electric start with key box and
3 amp charging
• Fixed Speed, 50 Hertz (3750 rpm HSNL)
14
14
CH440
CH440
CH440-0026
CH440-3026
$767.52
99
99
Standard Features Plus:
• Crankshaft - 1.0” (25.4 mm) Diameter x 3.49”
(88.61 mm) PTO Length,
Tapped 3/8-24 UNF
• Recoil and electric start with key box and
10 amp charging
• Variable Speed
14
14
14
CH440
CH440
CH440
CH440-0031
CH440-1031
CH440-3031
$799.50
99
99
99
Standard Features Plus:
• Crankshaft - 25mm Diameter x 62mm PTO
Length, Tapped M8 x 1.25 - 6H
• Recoil and electric start with key box and
10 amp charging
• Variable Speed
14
CH440
CH440-0032
99
Standard Features Plus:
• Crankshaft - 1” Diameter x 3.51” PTO
Length, Threaded Pump Shaft
• Recoil and electric start with key box and
10 amp charging
• Variable Speed
14
14
CH440
CH440
CH440-0034
CH440-3034
$799.50
99
99
25
14 HP (Horizontal Shaft) Single Cylinder
Description
HP
Model
Spec. No.
List Price*
Approx. Ship Wt. (lb.)
Standard Features Plus:
• Crankshaft - 0.87” Diameter x 4.18” PTO
Length, w/2.25” per foot Taper Shaft
• Fixed Speed, 50 Hertz (3150 rpm HSNL)
• Recoil and electric start with key box and
10 amp charging
14
14
CH440
CH440
CH440-0035
CH440-1035
99
99
Standard Features Plus:
• Crankshaft - 0.87” Diameter x 4.18” PTO
Length, w/2.25” per foot Taper Shaft
• Fixed Speed, 50 Hertz (3150 rpm HSNL)
• Recoil and electric start with key box and
10 amp charging
14
14
CH440
CH440
CH440-0036
CH440-3036
$799.50
99
99
Standard Features Plus:
• Crankshaft - 1.0” (25.4 mm) Diameter x 3.49”
(88.61 mm) PTO Length,
Tapped 3/8-24 UNF
• Variable Speed
• Recoil and electric start with key box and
18 amp charging
14
14
CH440
CH440
CH440-0041
CH440-3041
$831.48
99
99
Standard Features Plus:
• Crankshaft - 0.87” Diameter x 4.18” PTO
Length, w/2.25” per foot Taper Shaft
• Fixed Speed, 50 Hertz (3150 rpm HSNL)
• Low Profile Air Cleaner
• No Fuel Tank, No fuel shut-off valve
• No Muffler
14
14
CH440
CH440
CH440-0055
CH440-1055
81
81
Standard Features Plus:
• Crankshaft - 0.87” Diameter x 4.18” PTO
Length, w/2.25” per foot Taper Shaft
• Fixed Speed, 60 Hertz (3750 rpm HSNL)
• Low Profile Air Cleaner
• No Fuel Tank, No fuel shut-off valve
• No Muffler
14
14
14
CH440
CH440
CH440
CH440-0056
CH440-1056
CH440-3056
$607.62
81
81
81
Standard Features Plus:
• Crankshaft - 0.87” Diameter x 4.18” PTO
Length, w/2.25” per foot Taper Shaft
• Fixed Speed, 50 Hertz (3150 rpm HSNL)
• Low Profile Air Cleaner
• Recoil and electric start with key box and
3 amp charging
• No Fuel Tank, No fuel shut-off valve
• No Muffler
14
14
CH440
CH440
CH440-0065
CH440-1065
93
93
Standard Features Plus:
• Crankshaft - 0.87” Diameter x 4.18” PTO
Length, w/2.25” per foot Taper Shaft
• Fixed Speed, 60 Hertz (3750 rpm HSNL)
• Low Profile Air Cleaner
• Recoil and electric start with key box and
3 amp charging
• No Fuel Tank, No fuel shut-off valve
• No Muffler
14
CH440
CH440-3066
$778.18
93
26
14 HP (Horizontal Shaft) Single Cylinder
Description
HP
Model
Spec. No.
List Price*
Approx. Ship Wt. (lb.)
Standard Features Plus:
• Crankshaft - 0.87” Diameter x 4.18” PTO
Length, w/2.25” per foot Taper Shaft
• Fixed Speed, 60 Hertz (3750 rpm HSNL)
• Low Profile Air Cleaner
• Recoil and electric start with key box and
10 amp charging
• No Fuel Tank, No fuel shut-off valve
• No Muffler
14
14
14
CH440
CH440
CH440
CH440-0076
CH440-1076
CH440-3076
$788.84
93
93
93
Standard Features Plus:
• Crankshaft - 1.0” (25.4 mm) Diameter x 3.49”
(88.61 mm) PTO Length, Tapped 7/16-20
UNF
• Variable speed
• Heavy duty muffler
• Heavy duty starter
14
CH440
CH440-3113
$767.52
93
Standard Features Plus:
• 2:1 wet clutch gear box
• Output crankshaft – 22mm Diameter x
52.5mm Length
14
CH440
CH440-3018
$1,066.60
99
Standard Features Plus:
• 2:1 wet clutch gear box
• Output crankshaft – 22mm Diameter x
52.5mm Length
• Recoil and electric start with key box and
3 amp charging
14
CH440
CH440-3028
$1,226.60
108
Standard Features Plus:
• 2:1 wet clutch gear box
• Output crankshaft – 22mm Diameter x
52.5mm Length
• Recoil and electric start with key box and
10 amp charging
14
CH440
CH440-3038
$1236.60
108
Standard Features Plus:
• 2:1 wet clutch gear box
• Output crankshaft – 22mm Diameter x
52.5mm Length
• Recoil and electric start with key box and
18 amp charging
14
CH440
CH440-3048
$1,246.60
108
Standard Features Plus:
• 6:1 gear box
• Output crankshaft – 25.4mm Diameter x
74.3mm Length
14
CH440
CH440-3019
$971.60
95
Standard Features Plus:
• 6:1 gear box
• Output crankshaft – 25.4mm Diameter x
74.3mm Length
• Recoil and electric start with key box and
3 amp charging
14
CH440
CH440-3029
$1,131.60
103
27
14 HP (Horizontal Shaft) Single Cylinder
Description
HP
Model
Spec. No.
List Price*
Approx. Ship Wt. (lb.)
Standard Features Plus:
• 6:1 gear box
• Output crankshaft – 25.4mm Diameter x
74.3mm Length
• Recoil and electric start with key box and
10 amp charging
14
CH440
CH440-3039
$1,141.60
103
Standard Features Plus:
• 6:1 gear box
• Output crankshaft – 25.4mm Diameter x
74.3mm Length
• Recoil and electric start with key box and
18 amp charging
14
CH440
CH440-3049
$1,151.60
103
28
19 HP (Horizontal Shaft) V-Twin
Description
HP
Model
Spec. No.
List Price
Approx. Ship Wt. (lb.)
Standard Features:
• Overhead Valve Design
• Hydraulic Valve Lifters
• Electronic Ignition
• Dual Element Air Cleaner
• Closed Breather System
• Stellite® Exhaust Valves
• Cast Iron Cylinder Liners
• Full Pressure Lubrication
• In-Line Fuel Filter
• Easy Access Valve Cover Oil Fill
• Oil Level Dipstick
• Oil Filter
• Dual Oil Drain
• Oil Sentry™ (Switch Installed and Wired but Unconnected)
• Variable Speed Governor
• Fuel Shutdown Solenoid
• Smart-Choke™ Carburetor
• Mechanical Fuel Pump
• 12 Volt Solenoid Shift Starter
• 15 Amp Alternator, Regulated
• Crankshaft-1.125" (28.5 mm) Diameter x 4.0" (102 mm) PTO Length,
0.25" (6 mm) Keyway, Drilled and Tapped 1.5" (38 mm) Deep, 7/16-20 UNF
• PTO Face-5.625" (143 mm) Diameter, (4 Holes) 3/8-16 x 0.67" (17 mm) Deep,
7.75" (197 mm) Diameter, (4 Holes) 7/16-14 x 0.83" (21 mm) Deep
• 7" (178 mm) Diameter Pilot
• Color-Black with Cast Aluminum
• 3/16” Evaporative emissions connection
• See page 45 for Exhaust System Kits/Parts
19 CH620 CH620-3103 $1,392.80 106
Standard Features Plus:
• Engine Controls-Key Switch, Throttle and Choke
Controls (Pro version 62587)
19
CH620
CH620-3100
$1,427.40
106
Standard Features Plus:
• Engine Controls-Key Switch, Throttle and Choke
Controls
• Crankshaft-1" (25.4 mm) Diameter x 3.0" (76 mm)
PTO Length, 0.25" (6 mm) Keyway, Drilled and
Tapped 1" (25.4 mm) Deep, 3/8-24 UNF
• PTO Face-5" (127 mm) Diameter, (4 Holes) 5/16-
24 x 0.67" (17 mm) Deep, 6.5" (165 mm) Diameter,
(4 Holes), 3/8-16, 7.75" (197 mm) Diameter, (4
Holes) 7/16-14 x 0.83" (21 mm) Deep
• 5.75" (146 mm) Diameter Pilot
19
CH620
CH620-3101
$1,427.40
106
29
19 HP (Horizontal Shaft) V-Twin
Description
HP
Model
Spec. No.
List Price
Approx. Ship Wt. (lb.)
Standard Features Plus:
• Crankshaft-1" (25.4 mm) Diameter x 3.0" (76 mm)
PTO Length, 0.25" (6 mm) Keyway, Drilled and
Tapped 1" (25.4 mm) Deep, 3/8-24 UNF
• PTO Face-5" (127 mm) Diameter, (4 Holes) 5/16-
24 x 0.67" (17 mm) Deep, 6.5" (165 mm) Diameter,
(4 Holes) 3/8-16 x 0.83" (21 mm) Deep, 7.75" (197
mm) Diameter (4 Holes) 7/16-14 x 0.83" (21 mm)
Deep
• 5.75" (146 mm) Diameter Pilot
19
CH620
CH620-3104
$1,392.79
106
Standard Features Plus:
• Engine Controls-Key Switch, Throttle and Choke
Controls
• Anti-Icing Features with Starter Side Exhaust
System
• Fixed Grass Screen Guard
• Round Air Cleaner with Snorkel to Starter Side
Muffler
19
CH620
CH620-3105
$1,572.95
106
Standard Features Plus:
• Crankshaft-2.25" (57.15 mm) Per Foot (305 mm)
Taper, 1.5" (38 mm) Diameter x 3.94" (100.1 mm)
PTO Length, Drilled and Tapped 0.625" (16 mm)
Deep, 5/16-24 UNF
• PTO Face-5.625" (143 mm) Diameter (4 Holes)
3/8-16 x 0.67" (17 mm) Deep, 7.75" (197 mm)
Diameter, (4 Holes) 7/16-14 x 0.83" (21 mm) Deep
• 6.437" (163 mm) Diameter Pilot
• Oil Sentry™ Wired for Shutdown
• Fixed Grass Screen Guard
• Engine Controls-Key Switch and Choke Control
• 5% Governor Regulation
• Constant Speed @ 3200 RPM
19
CH620
CH620-3106
$1,512.60
107
Standard Features Plus:
• 9 Tooth Spline Crankshaft
• Engine Controls-Key Switch, Throttle and Choke
Controls (Pro version 62587)
• SAE “A” Mount Hydraulic Pump Adapter
19
CH620
CH620-3108
$1,512.60
106
30
19 HP (Horizontal Shaft) V-Twin
Description
HP
Model
Spec. No.
List Price
Approx. Ship Wt. (lb.)
Standard Features Plus:
• Engine Controls-Key Switch, Throttle and Choke
Controls
• Retractable Start Backup
• Crankshaft-1" (25.4 mm) Diameter x 3.0" (76.2
mm) PTO Length, 0.25" (6 mm) Keyway, Drilled
and Tapped 1" (25.4 mm) Deep, 3/8-24 UNF
• PTO Face-5" (127 mm) Diameter, (4 Holes) 5/16-24 x
0.67" (17 mm) Deep, 6.5" (165 mm) Diameter,
(4 Holes) 3/8-16 x 0.83" (21 mm) Deep, 7.75"
(197 mm) Diameter, (4 Holes) 7/16-14 x 0.83"
(21 mm) Deep
• 5.75" (146 mm) Diameter Pilot
19
CH620
CH620-3107
$1,477.86
106
31
20.5 HP (Horizontal Shaft) V-Twin
Description
HP
Model
Spec. No.
List Price
Approx. Ship Wt. (lb.)
Standard Features:
• Overhead Valve Design
• Hydraulic Valve Lifters
• Electronic Ignition
• Dual Element Air Cleaner
• Closed Breather System
• Stellite® Exhaust Valves
• Cast Iron Cylinder Liners
• Full Pressure Lubrication
• In-Line Fuel Filter
• Easy Access Valve Cover Oil Fill
• Oil Level Dipstick
• Oil Filter
• Dual Oil Drain
• Oil Sentry™ (Switch Installed and Wired but Unconnected)
• Variable Speed Governor
• Fuel Shutdown Solenoid
• Smart-Choke™ Carburetor
• Mechanical Fuel Pump
• 12 Volt Solenoid Shift Starter
• 15 Amp Alternator, Regulated
• Crankshaft-1.437" (36 mm) Diameter x 4.41" PTO Length, 0.375" (9.5 mm) Keyway,
Drilled and Tapped 1.5" (38 mm) Deep, 5/8-18 UNF
• PTO Face-5.625" (143 mm) Diameter, (4 Holes) 3/8-16 x 0.67" (17 mm) Deep, 7.75" (197 mm)
Diameter, (4 Holes) 7/16-14 x 0.83" (21 mm) Deep
• 7" (178 mm) Diameter Pilot
• Color-Black with Cast Aluminum
• 3/16” Evaporative emissions connection
• See page 45 for Exhaust System Kits/Parts
20.5 CH640 CH640-3204 $1,598.46 106
Standard Features Plus:
• Engine Controls-Key Switch, Throttle and
Choke Controls (Pro version 64594)
20.5
CH640
CH640-3202
$1,634.01
106
Standard Features Plus:
• Engine Controls-Key Switch, Throttle and
Choke Controls
• Crankshaft-1.125" (28.5 mm) Diameter x 4.0"
(102 mm) PTO Length, 0.25" (6 mm) Keyway,
Drilled and Tapped 1.5" (38 mm) Deep, 7/16-20
UNF (Pro version 64595)
20.5
CH640
CH640-3205
$1,634.01
106
32
19-25 HP (Horizontal Shaft) V-Twin
Description
HP
Model
Spec. No.
List Price
Approx. Ship Wt. (lb.)
Standard Features:
• Overhead Valve Design
• Hydraulic Valve Lifters
• Magneto Digital Ignition System (25 HP)
• Cast-Iron Cylinder Liners
• PTO Sleeve Bearing (Side Load) (23.5 & 25 HP)
• Electronic Ignition
• Large Capacity Dual Element Air Cleaner
• High Efficiency Grass Screen and Fan
• Closed Breather System
• Stellite® Exhaust Valves
• Full Pressure Lubrication
• Large Capacity In-Line Fuel Filter
• Easy Access Valve Cover Oil Fill-Yellow
• Oil Level Dipstick-Yellow
• Large Capacity Oil Filter, Dual Oil Drain
• Oil Sentry™ (Switch Installed and Wired but Unconnected)
• Variable Speed Governor
• High Performance Accelerator Pump Carburetor (23.5 & 25 HP)
• Fuel Shutdown Solenoid, Smart-Choke™ Carburetor
• Mechanical Fuel Pump
• High Performance Spark Plugs
• 12 Volt Solenoid Shift Starter
• 20 Amp Alternator, Regulated
• Crankshaft-1.437" (36 mm) Diameter x 4.453" (113 mm) PTO Length, 0.375" (9.5 mm) Keyway,
Drilled and Tapped 1.5" (38 mm) Deep, 5/8-18 UNF
• PTO Face-5.625" (143 mm) Diameter, (4 Holes) 3/8-16 x 0.67" (17 mm) Deep, 7.75" (197 mm) Diameter,
(4 Holes) 7/16-14 x 0.83" (21 mm) Deep
• 7" (178 mm) Diameter Pilot
• Color-Black with Cast Aluminum
• 3/16” Evaporative emissions connection
• See page 45 for Exhaust System Kits
Standard Features Plus:
• Blower Housing to Accept Fixed Guard Blower Housing to Accept Fixed Guard
23.5
25
25
CH730
CH740
CH740
CH730-3208
CH740-3006
CH740-3009
$1,696.61
$2,081.37
$2,113.88
108
108
108
Standard Features Plus:
• Engine Controls-Key Switch, Throttle and
Choke Controls
• Fixed Grass Screen Guard (25 & 27 HP)
20.5
22.5
23.5
25
CH640
CH680
CH730
CH740
CH640-3201
CH680-3002
CH730-3203
CH740-3005
$1,691.07
$1,736.80
$1,824.19
$2,142.88
106
106
108
108
33
19-25 HP (Horizontal Shaft) V-Twin
Description
HP
Model
Spec. No.
List Price
Approx. Ship Wt. (lb.)
Standard Features Plus:
• Crankshaft-1.125" (28.5 mm) Diameter x 4.0"
(102 mm) PTO Length, 0.25" (6 mm) Keyway,
Drilled and Tapped 1.5"(38 mm) Deep,
7/16-20 UNF
• Engine Controls-Key Switch, Throttle and
Choke Controls
• Fixed Grass Screen Guard (25 HP)
19
20.5
22.5
23.5
CH620
CH640
CH680
CH730
CH620-3102
CH640-3206
CH680-3001
CH730-3201
$1,482.40
$1,691.07
$1,694.53
$1,824.19
106
106
106
108
Standard Features Plus:
• Crankshaft-1.125" (28.5 mm) Diameter x 4.0"
(102 mm) PTO Length, 0.25" (6 mm) Keyway,
Drilled and Tapped 1.5" (38 mm) Deep,
7/16-20 UNF
• Engine Controls-Key Switch, Throttle and
Choke Controls
• Anti-Icing Features with Starter Side Exhaust
System
• Round Air Cleaner with Snorkel to Starter
Side Muffler
• Fixed Grass Screen Guard
20.5 23.5 25
CH640 CH730 CH740
CH640-3203 CH730-3202 CH740-3004
$1,784.33 $2,056.25 $2,350.50
106 109 106
Standard Features Plus:
• Crankshaft-2.25" (57.15 mm) Per Foot
(305 mm) Taper, 1.5" (38 mm) Diameter x 3.94"
(100.1 mm) PTO Length, Drilled and Tapped
0.625" (16 mm) Deep, 5/16-24 UNF
• No PTO Thrust Bearing
• PTO Face-5.625" (143 mm) Diameter,
(4 Holes) 3/8-16 x 0.67" (17 mm) Deep, 7.75"
Diameter, (4 Holes) 7/16-14 x 0.83" (21 mm)
Deep
• 6.437" (163 mm) Diameter Pilot
• Oil Sentry™ Wired for Shutdown
• Fixed Grass Screen Guard
• Engine Controls-Key Switch and Choke Control
• 5% Governor Regulation
• Constant Speed @ 3200 RPM
22.5 23.5
CH680 CH730
CH680-3003 CH730-3210
$1,593.98 $2,025.60
106 108
34
19-25 HP (Horizontal Shaft) V-Twin
Description
HP
Model
Spec. No.
List Price
Approx. Ship Wt. (lb.)
Standard Features Plus:
• Engine Mounted Throttle and Choke Controls
• Key Switch Shipped as an Accessory
• Fixed Grass Screen Guard
• 25 Amp Alternator, Regulated
• Crankshaft-1.5" (38 mm) Diameter x 0.452"
(11.5 mm) PTO Length, 13 Tooth Spline,
SAE “B” Mount Hydraulic Pump Adaptor
23.5
CH730
CH730-3206
$2,033.56
110
Standard Features Plus:
Super Spec
• 25 Amp Alternator
• Dual Oil Fill
• Clean Out Covers - Right Side Cover has
Provision for Key Switch to be Added
• 50 State Compliant
• Provision for Adding Fixed Grass Screen
Guard
• To Add Controls Use These Parts:
24 225 02-S Throttle & Choke Assembly,
25 099 04-S Key Switch, Decals
24 113 126-S & 24 113 91-S
23.5
CH730
CH730-3207
$1,882.57
108
35
23.5 & 25 HP (Horizontal Shaft) V-Twin
Description
HP
Model
Spec. No.
List Price
Approx. Ship Wt. (lb.)
Standard Features:
• Overhead Valve Design
• Hydraulic Valve Lifters
• Heavy Duty Canister Air Cleaner System
• Fixed Grass Screen Guard
• Magneto Digital Ignition System (25 HP)
• Cast-Iron Cylinder Liners
• PTO Sleeve Bearing (Side Load)
• Electronic Ignition
• High Efficiency Grass Screen and Fan
• Closed Breather System
• Stellite® Exhaust Valves
• Full Pressure Lubrication
• Large Capacity In-Line Fuel Filter
• Easy Access Valve Cover Oil Fill-Yellow
• Oil Level Dipstick-Yellow
• Large Capacity Oil Filter
• Dual Oil Drain
• Oil Sentry™ (Switch Installed and Wired but Unconnected)
• Variable Speed Governor
• High Performance Accelerator Pump Carburetor
• Fuel Shutdown Solenoid
• Smart-Choke™ Carburetor
• Two barrel Carburetor
• Mechanical Fuel Pump
• High Performance Spark Plugs
• 12 Volt Solenoid Shift Starter
• 20 Amp Alternator, Regulated
• Crankshaft-1.437" (36 mm) Diameter x 4.46" (113 mm) PTO Length, 0.375" (9.5 mm) Keyway, Drilled and
Tapped 1.5" (38 mm) Deep, 5/8-18 UNF
• PTO Face-5.625" (143 mm) Diameter, (4 Holes) 3/8-16 x 0.67" (17 mm) Deep, 7.75" (197 mm) Diameter,
(4 Holes) 7/16-14 x 0.83" (21 mm) Deep
• 7" (178 mm) Diameter Pilot
• Color-Black with Cast Aluminum
• 3/16” Evaporative emissions connection
• See page 45 for Exhaust System Kits
25
CH742
CH742-3102
$2,131.86
108
Standard Features Plus:
• Engine Controls-Key Switch, Throttle and
Choke Controls
23.5
25
25
CH732
CH742
CH742
CH732-3000
CH742-3100
CH742-3104
$2,002.41
$2,201.30
$2,236.46
108
108
108
Standard Features Plus:
• Crankshaft-1.125" (28.5 mm) Diameter x 4.0"
(102 mm) PTO Length, 0.25" (6 mm) Keyway,
Drilled and Tapped 1.5" (38 mm) Deep,
7/16-20 UNF
• Engine Controls-Key Switch, Throttle and
Choke Controls
23.5
25
CH732
CH742
CH732-3001
CH742-3103
$2,002.41
$2,201.30
108
108
36
27 HP (Horizontal Shaft) V-Twin
Description
HP
Model
Spec. No.
List Price
Approx. Ship Wt. (lb.)
Standard Features:
• Overhead Valve Design
• Hydraulic Valve Lifters
• Magneto Digital Ignition System
• Cast-Iron Cylinder Liners
• PTO Sleeve Bearing (Side Load)
• Electronic Ignition
• Large Capacity Dual Element Air Cleaner
• High Efficiency Grass Screen and Fan
• Closed Breather System
• Stellite® Exhaust Valves
• Full Pressure Lubrication
• Large Capacity In-Line Fuel Filter
• Easy Access Valve Cover Oil Fill-Yellow
• Oil Level Dipstick-Yellow
• Large Capacity Oil Filter, Dual Oil Drain
• Oil Sentry™ (Switch Installed and Wired but Unconnected)
• Variable Speed Governor
• Two-Barrel Carburetor
• Fuel Shutdown Solenoid
• Smart-Choke™ Carburetor
• Mechanical Fuel Pump
• High Performance Spark Plugs
• 12 Volt Solenoid Shift Starter
• Crankshaft-1.437" (36 mm) Diameter x 4.453" (113 mm) PTO Length,
0.375" (9.5 mm) Keyway, Drilled and Tapped 1.5" (38 mm) Deep, 5/8-18 UNF
• PTO Face-5.625" (143 mm) Diameter, (4 Holes) 3/8-16 x 0.67" (17 mm) Deep,
7.75" (197 mm) Diameter, (4 Holes) 7/16-14 x 0.83" (21 mm) Deep
• 7" (178 mm) Diameter Pilot
• Color-Black with Cast Aluminum
• 3/16” Evaporative emissions connection
• See page 45 for Exhaust System Kits
Standard Features Plus:
• Fixed Grass Screen Guard
• 25 Amp Alternator, Regulated
27
CH750
CH750-3006
$2,140.10
108
Standard Features Plus:
• Crankshaft-1.125" (28.5 mm) Diameter x 4.0"
(102 mm) PTO Length, 0.25" (6 mm) Keyway,
Drilled and Tapped 1.5" (38 mm) Deep,
7/16-20 UNF
• Engine Controls-Key Switch, Throttle and
Choke Controls
• Fixed Grass Screen Guard
• 25 Amp Alternator, Regulated
27
CH750
CH750-3005
$2,203.84
108
37
27 HP (Horizontal Shaft) V-Twin
Description
HP
Model
Spec. No.
List Price
Approx. Ship Wt. (lb.)
Standard Features:
• Overhead Valve Design
• Hydraulic Valve Lifters
• Magneto Digital Ignition System
• Kohler Heavy Duty Canister Air Cleaner System
• Fixed Grass Screen Guard
• Cast-Iron Cylinder Liners
• PTO Sleeve Bearing (Side Load)
• Electronic Ignition
• High Efficiency Grass Screen and Fan
• Closed Breather System
• Stellite® Exhaust Valves
• Full Pressure Lubrication
• Large Capacity In-Line Fuel Filter
• Easy Access Valve Cover Oil Fill-Yellow
• Oil Level Dipstick-Yellow
• Large Capacity Oil Filter
• Dual Oil Drain
• Oil Sentry™ (Switch Installed and Wired but Unconnected)
• Variable Speed Governor
• Two-Barrel Carburetor
• Fuel Shutdown Solenoid
• Smart-Choke™ Carburetor
• Mechanical Fuel Pump
• High Performance Spark Plugs
• 12 Volt Solenoid Shift Starter
• 20 Amp Alternator, Regulated
• Crankshaft-1.437" (36 mm) Diameter x 4.46" (113 mm) PTO Length,
0.375" (9.5 mm) Keyway, Drilled and Tapped 1.5" (38 mm) Deep, 5/8-18 UNF
• PTO Face-5.625" (143 mm) Diameter, (4 Holes) 3/8-16 x 0.67" (17 mm) Deep,
7.75" (197 mm) Diameter, (4 Holes) 7/16-14 x 0.83" (21 mm) Deep
• 7" (178 mm) Diameter Pilot
• Color-Black with Cast Aluminum
• 3/16” Evaporative emissions connection
• See page 45 for Exhaust System Kits
27 CH752 CH752-3100 $2,193.22 108
Standard Features Plus:
• Engine Controls-Key Switch, Throttle and
Choke Controls
27
CH752
CH752-3102
$2,256.95
108
Standard Features Plus:
• Crankshaft-1.125" (28.5 mm) Diameter x 4.0"
(102 mm) PTO Length, 0.25" (6 mm) Keyway,
Drilled and Tapped 1.5" (38 mm) Deep,
7/16-20 UNF
• Engine Controls-Key Switch, Throttle and
Choke Controls
27
CH752
CH752-3101
$2,256.95
108
38
32.5-37 HP (Horizontal Shaft) V-Twin
Description
HP
Model
Spec. No.
List Price
Approx. Ship Wt. (lb.)
Standard Features:
• Overhead Valve Design
• Hydraulic Valve Lifters
• Nylon Cam Gear
• Cast-Iron Cylinder Liners
• Stellite® Exhaust Valves
• Flywheel and PTO Sleeve Bearings
• Electronic Ignition
• High Performance Spark Plugs RFI and EMC Compliant
• Full Pressure Lubrication
• Top Mount Spin-On Large Capacity Oil Filter
• Large Dual Oil Drains
• Heavy Duty Canister Air Cleaner System
• High Efficiency Grass Screen and Fan
• Fixed Grass Screen Guard
• Blower Housing with Removable Cylinder Access Covers
• Easy Access Valve Cover Oil Fill-Yellow
• Oil Level Dipstick-Yellow
• Oil Sentry™ (Switch Installed but Unconnected)
• Variable Speed Governor
• Front Mounted Remote Controls (for boden wire connection)
• Closed Breather System
• Two-Barrel Carburetor
• Fuel Shutdown Solenoid
• Smart-Choke™ Carburetor
• Mechanical Fuel Pump
• Large Capacity In-Line Fuel Filter
• 12 Volt Solenoid Shift Starter
• 25 Amp Alternator, Regulated
• Crankshaft-1.437" (36 mm) Diameter x 4.46" (113 mm) PTO Length,
0.375" (9.5 mm) Keyway, Drilled and Tapped 1.5" (38 mm) Deep, 5/8-18 UNF
• PTO Face-5.625" (143 mm) Diameter, (4 Holes) 3/8-16 x 0.67" (17 mm) Deep,
7.75" (197 mm) Diameter, (4 Holes) 7/16-14 x 0.83" (21 mm) Deep
• 7" (178 mm) Diameter Pilot
• Color-Black with Cast Aluminum
• 3/16” Evaporative emissions connection
• See page 41 for Exhaust System Kits
32.5
35
37
CH940
CH980
CH1000
CH940-2002
CH980-2002
CH1000-2002
$2,402.35
$2,797.60
$3,105.01
132
132
132
Standard Features Plus:
• Crankshaft-1.125" (28.5 mm) Diameter x
3.35" (85 mm) PTO Length
32.5
35
CH940
CH980
CH940-2003
CH980-2003
$2,442.92
$2,838.17
132
132
Standard Features Plus:
• SAI
• Muffler (opposite starter side exhaust outlet)
35
CH980
CH980-2006*
$3,013.30
132
*50 State Certified
39
32.5-37 HP (Horizontal Shaft) V-Twin
Description
HP
Model
Spec. No.
List Price
Approx. Ship Wt. (lb.)
Standard Features Plus:
• SAI
• Muffler (starter side exhaust outlet)
35
CH980
CH980-2007*
$3,013.30
132
Standard Features Plus:
• SAI
• Muffler (center exhaust outlet)
35
CH980
CH980-2008*
$3,013.30
132
*50 State Certified
40
32.5-37 HP (Horizontal Shaft) V-Twin
Description
HP
Model
Spec. No.
List Price
Approx. Ship Wt. (lb.)
Standard Features:
• Overhead Valve Design
• Hydraulic Valve Lifters
• Nylon Cam Gear
• Cast-Iron Cylinder Liners
• Stellite® Exhaust Valves
• Flywheel and PTO Sleeve Bearings
• Electronic Ignition
• High Performance Spark Plugs RFI and EMC Compliant
• Full Pressure Lubrication
• Top Mount Spin-On Large Capacity Oil Filter
• Large Dual Oil Drains
• Flat Air Cleaner
• High Efficiency Grass Screen and Fan
• Fixed Grass Screen Guard
• Blower Housing with Removable Cylinder Access Covers
• Easy Access Valve Cover Oil Fill-Yellow
• Oil Level Dipstick-Yellow
• Oil Sentry™ (Switch Installed but Unconnected)
• Variable Speed Governor
• Front Mounted Remote Controls (for boden wire connection)
• Closed Breather System
• Two-Barrel Carburetor
• Fuel Shutdown Solenoid
• Smart-Choke™ Carburetor
• Mechanical Fuel Pump
• Large Capacity In-Line Fuel Filter
• 12 Volt Solenoid Shift Starter
• 25 Amp Alternator, Regulated
• Crankshaft-1.437" (36 mm) Diameter x 4.46" (113 mm) PTO Length,
0.375" (9.5 mm) Keyway, Drilled and Tapped 1.5" (38 mm) Deep, 5/8-18 UNF
• PTO Face-5.625" (143 mm) Diameter, (4 Holes) 3/8-16 x 0.67" (17 mm) Deep,
7.75" (197 mm) Diameter, (4 Holes) 7/16-14 x 0.83" (21 mm) Deep
• 7" (178 mm) Diameter Pilot
• Color-Black with Cast Aluminum
• 3/16” Evaporative emissions connection
• See page 41 for Exhaust System Kits
32.5
35
37
CH940
CH980
CH1000
CH940-2005
CH980-2005
CH1000-2023
$2,390.04
$2,785.29
$3,143.32
132
132
132
Standard Features Plus:
Mud Boat Spec
• Crankshaft-1.125" (28.5 mm) Diameter x
4.00" (101.6 mm) PTO Length
• Remote Throttle Manual Choke (Engine
Mounted Key Switch
• Canister Muffler PTO Outlet (62 786 01-S
Installed)
37
CH1000
CH1000-2012
$3,148.77
132
41
32.5-37 HP (Horizontal Shaft) V-Twin Description
HP
Model
Spec. No.
List Price
Approx. Ship Wt. (lb.)
Standard Features Plus: • SAI • Muffler (opposite starter side exhaust outlet)
35
CH980
CH980-2021*
$3,001.11
132
Standard Features Plus: • SAI
• Muffler (starter side exhaust outlet)
35
CH980
CH980-2022*
$3,001.11
132
Standard Features Plus: • SAI
• Muffler (center exhaust outlet)
35
CH980
CH980-2023*
$3,001.11
132
*50 State Certified
Control Kit and Exhaust System Kits Kit/Part No. Description List Price
62 376 02-S
Engine Mounted Control Kit (Includes Key Switch, Panel, Oil Sentry Light, Decal Knobs, Brackets, and Screws) .................................................................................... $81.07
62 786 01-S 62 786 02-S 62 786 03-S
PTO Canister Muffler Kit-Center Outlet (Includes Muffler) .......................................... $129.68 PTO Canister Muffler Kit-Starter Side Outlet (Includes Muffler) .................................. $129.68 PTO Canister Muffler Kit-Opposite Starter Side Outlet (Includes Muffler) .................. $129.68
42
25 & 26.5 HP (Horizontal Shaft) V-Twin
Description
HP
Model
Spec. No.
List Price
Approx. Ship Wt. (lb.)
Standard Features:
• Overhead Valve Design
• Hydraulic Valve Lifters
• Cast-Iron Cylinder Liners
• PTO Sleeve Bearing (Side Load)
• Electronic Ignition
• Heavy Duty Canister Air Cleaner System (Kohler)
• High Efficiency Grass Screen and Fan
• Closed Breather System
• Stellite® Exhaust Valves
• Full Pressure Lubrication
• In-Line Fuel Filter
• Easy Access Valve Cover Oil Fill-Yellow
• Oil Level Dipstick-Yellow
• Large Capacity Oil Filter, Dual Oil Drain
• Oil Sentry™
• Variable Speed Governor
• Mechanical Fuel Pump
• High Performance Spark Plugs
• 12 Volt Solenoid Shift Starter
• Crankshaft-1.125"(28.5 mm) Diameter x 4.0" (102 mm) PTO Length,
0.25" (6 mm) Keyway, Drilled and Tapped 1.5" (38 mm) Deep, 7/16-20 UNF
• PTO Face-5.625" (143 mm) Diameter, (4 Holes) 3/8-16 x 0.67" (17 mm) Deep,
7.75" (197 mm) Diameter, (4 Holes) 7/16-14 x 0.83" (21 mm) Deep
• 7" (178 mm) Diameter Pilot
• Color-Black with Cast Aluminum
• Engine Controls-Key Switch and Throttle Control
• Fixed Grass Screen Guard
• 20 Amp Alternator, Regulated
• 3/16” Evaporative emissions connection
• Oxygen Sensor
• See page 45 for Exhaust System Kits
25
26.5
ECH740
ECH749
ECH740-3002
ECH749-3002
$2,421.10
$2,474.13
108
108
Standard Features Plus:
• Crankshaft-1.437" (36.5 mm) Diameter x
4.46" (113 mm) PTO Length, 0.375" (9.5 mm)
Keyway, Drilled and Tapped 1.5" (38 mm)
Deep, 5/8-18 UNF
25
26.5
ECH740
ECH749
ECH740-3001
ECH749-3003
$2,421.10
$2,474.13
108
108
Standard Features Plus:
• 25 Amp Alternator, Regulated
26.5
ECH749
ECH749-3005
$2,493.64
108
43
19-26.5 HP (Horizontal Shaft) V-Twin
Description
HP
Model
Spec. No.
List Price
Approx. Ship Wt. (lb.)
Standard Features:
• Overhead Valve Design
• Hydraulic Valve Lifters
• Cast-Iron Cylinder Liners
• PTO Sleeve Bearing (Side Load)
• Electronic Ignition
• Large Capacity Dual Element Air Cleaner
• High Efficiency Grass Screen and Fan
• Closed Breather System
• Stellite® Exhaust Valves
• Full Pressure Lubrication
• In-Line Fuel Filter
• Easy Access Valve Cover Oil Fill-Yellow
• Oil Level Dipstick-Yellow
• Large Capacity Oil Filter, Dual Oil Drain
• Oil Sentry™
• Variable Speed Governor
• Mechanical Fuel Pump
• High Performance Spark Plugs
• 12 Volt Solenoid Shift Starter
• Crankshaft-1.125"(28.5 mm) Diameter x 4.0" (102 mm) PTO Length,
0.25" (6 mm) Keyway, Drilled and Tapped 1.5" (38 mm) Deep, 7/16-20 UNF
• PTO Face-5.625" (143 mm) Diameter, (4 Holes) 3/8-16 x 0.67" (17 mm) Deep,
7.75" (197 mm) Diameter, (4 Holes) 7/16-14 x 0.83" (21 mm) Deep
• 7" (178 mm) Diameter Pilot
• Color-Black with Cast Aluminum
• Fixed Grass Screen Guard
• 20 Amp Alternator, Regulated
• 3/16” Evaporative emissions connection
• Oxygen Sensor
• See page 45 for Exhaust System Kits
19
23
ECH630
ECH730
ECH630-3003
ECH730-3003
$1,624.05
$2,061.92
108
108
Standard Features Plus:
• Engine Controls-Key Switch and Throttle
Control
19
21
23
ECH630
ECH650
ECH730
ECH630-3001
ECH650-3001
ECH730-3002
$1,672.83
$1,872.58
$2,110.70
108
108
108
Standard Features Plus:
• Crankshaft-1.437" (36.5 mm) Diameter x
4.46" (113 mm) PTO Length, 0.375" (9.5 mm)
Keyway, Drilled and Tapped 1.5" (38 mm)
Deep, 5/8-18 UNF
• Engine Controls-Key Switch and Throttle
Control
21
23
25
ECH650
ECH730
ECH740
ECH650-3002
ECH730-3001
ECH740-3003
$1,872.58
$2,110.70
$2,364.62
108
108
108
Standard Features Plus:
• 25 Amp Alternator, Regulated
26.5
ECH749
ECH749-3004
$2,374.00
108
Standard Features Plus:
• 25 Amp Alternator, Regulated
• Engine Controls-Key Switch and Throttle
Control
26.5
ECH749
ECH749-3001
$2,422.78
108
44
19-26.5 HP (Horizontal Shaft) V-Twin
Description
HP
Model
Spec. No.
List Price
Approx. Ship Wt. (lb.)
Standard Features Plus:
• 25 Amp Alternator, Regulated
• Crankshaft internal 13 tooth spline
• Closure plate SAE ”B” mount to mount a
hydraulic pump adapter
26.5
ECH749
ECH749-3006
$2,616.18
108
Standard Features Plus:
• Crankshaft-1.125” x 3.35” PTO tapped 7/16-
20
• Fixed Speed with Idle Solenoid
• 25 Amp Alternator, Regulated
• Key Switch
• Oil Filter Side Outlet Muffler and Heat Shield
19
26.5
ECH630
ECH749
ECH630-3004
ECH749-3008
$1,892.34
$2,617.90
108
108
Standard Features Plus:
• Crankshaft-1.437” (36.5 mm) Diameter x
4.46” (113 mm) PTO Length. 0.375” (9.5 mm)
Keyway, Drilled and tapped 7/16-20
• Engine Controls-Key Switch and Throttle
Control
• RFI compliant
• Anti-Icing Features with Starter Side Mounted
Muffler
23
25
ECH730
ECH740
ECH730-3004
ECH740-3004
$2,539.80
$2,604.85
108
108
Standard Features Plus:
• Engine Controls-Key Switch and Throttle
Control
• RFI compliant
• 25 Amp Alternator, Regulated
• Anti-Icing Features with Starter Side Mounted
Muffler
26.5
ECH749
ECH749-3031
$2,669.89
108
45
Aegis and Command Exhaust System Kits/Parts Kit/Part No. Description List Price (each)
24 786 04-S 24 786 05-S 24 786 06-S 24 786 08-S 24 786 09-S 24 786 10-S 24 786 11-S 24 786 12-S 24 786 13-S 24 786 14-S 24 786 19-S 24 786 20-S 24 786 21-S 24 786 22-S 25 755 36-S 24 786 24-S 24 786 25-S 24 786 28-S 24 786 29-S 24 786 30-S 24 786 31-S 24 786 32-S 24 786 33-S
PTO Canister Muffler Kit-Center Outlet (CH620-CH680) .......................................... $113.34 PTO Canister Muffler Kit-Filter Side Outlet (CH620-CH680) ..................................... $113.34 PTO Canister Muffler Kit-Starter Side Outlet (CH620-CH680) .................................. $113.34 Side Mount Muffler Kit-Starter Side (CH620-CH680) ................................................ $193.45 Side Mount Muffler Kit-Filter Side (CH620-CH680) ................................................... $193.45 PTO Canister Muffler Kit-Center Outlet (CH730/CH740, LH640-755) ...................... $146.30 PTO Canister Muffler Kit-Filter Side Outlet (CH730/CH740, LH640-755) ................. $146.30 PTO Canister Muffler Kit-Starter Side Outlet (CH730/CH740, LH640-755) .............. $139.33 Valve Cover Mounting Muffler Kit-Starter Side (CV620-CV680) ............................... $211.84 Valve Cover Mounting Muffler Kit-Filter Side (CV620-CV680) .................................. $207.60 Side Mount Muffler Kit-Starter Side (CH730/CH740, LH640-755) ............................ $239.52 Side Mount Muffler Kit-Filter Side (CH730/CH740, LH640-755) ............................... $265.75 Raised Body PTO Canister Kit-Filter Side Outlet (CH620-740, LH640-755) ............. $172.91 Raised Body PTO Canister Kit-Starter Side Outlet (CH620-740, LH640-755) .......... $172.91 Mounting Kit, Canister Muffler (CH745, LH775) .......................................................... $32.67 Side Mount Muffler Kit - Starter Side (CH745, LH775) .............................................. $190.41 Side Mount Muffler Kit - Filter Side (CH745, LH775) ................................................. $190.41 Muffler Kit – Starter Side (Command EFI Verticals)……………………………………..$166.94 Muffler Kit – Filter Side (Command EFI Verticals)……………………………………….$166.94 Muffler Kit – Filter Side Down (Command EFI Verticals)………………………………..$224.82 Muffler Kit – Starter Side (Command EFI Horizontals)………………………………….$132.47 Muffler Kit – Filter Side (Command EFI Horizontals)…………………………………….$132.52 Muffler Kit – Center Outlet (Command EFI Horizontals)………………………………...$131.47
46
21.5 HP (Horizontal Shaft) V-Twin Carbureted Propane
Standard Command PRO Features:
High Efficiency Overhead Valve Design
Zero Maintenance Hydraulic Valvetrain
Cast-Iron Cylinder Liners
High Efficiency, Low-Noise Cooling Fan
Full Pressure Lubrication System to all Bearings
Hardened, Micro-Polished, Dynamic-Balanced Crankshaft
Variable Speed Governor
Easy-to-Identify Yellow Oil Service Points for Valve Cover
Oil Fill and Dipstick
International Emissions Certifications
3 year Unlimited Hour Commercial Warranty
Model Features:
Designed to operate on Liquid Propane (LP) Fuel
Drop-in-Place Design
o Engine-Mounted Propane Fuel Pressure Regulator
o Engine-Mounted Propane Fuel Vaporizer for Liquid Withdrawal
o Engine-Mounted 12V Fuel Shutoff Solenoid
Kohler Low Profile, Dual-Element Air Cleaner System
Easy Start with Digital Spark Advance Ignition and High Torque Solenoid Shift Starter
Engine-Mounted Keyswitch and Engine Controls
20 Amp Regulated Charging System
RFI Compliance
Low Oil Pressure Sentry Protection
Quiet PTO Canister Muffler with Starter Side Outlet
3750 rpm high idle setting, 1200 rpm low idle setting
HP Model Spec Number List Price Approx Ship Weight (lbs) 21.5 CH730LP CH730-3015 $2175.26 108 Spec-Specific Features:
Crankshaft PTO
o 1.0" (25.4 mm) Diameter x 2.992" (76 mm) PTO Length
o 0.250" (6 mm) Keyway
o Drilled and Tapped 1.0" (38 mm) Deep, 3/8-24 UNF-2B
PTO Mounting Face
o 5.625" (143 mm) Diameter (4 Holes) 3/8-16 UNC-2B x 0.67" (17 mm) Deep
o 7.75" (197 mm) Diameter (4 Holes) 7/16-14 UNC-2B x 0.83" (21 mm) Deep
o 7.00" (178 mm) Pilot Diameter
High Capacity PTO Sleeve Bearing (2000 in-lbs Side Load)
47
21.5 HP (Horizontal Shaft) V-Twin Carbureted Propane
HP Model Spec Number List Price Approx Ship Weight (lbs) 21.5 CH730LP CH730-3266 $2433.98 108 Spec-Specific Features:
Crankshaft PTO
o 1.437" (36.5 mm) Diameter x 4.457" (113 mm) PTO Length
o 0.375" (9.5 mm) Keyway
o Drilled and Tapped 1.5" (38 mm) Deep, 5/8-18 UNF-2B
PTO Face
o 5.625" (143 mm) Diameter (4 Holes) 3/8-16 UNC-2B x 0.67" (17 mm) Deep
o 7.75" (197 mm) Diameter (4 Holes) 7/16-14 UNC-2B x 0.83" (21 mm) Deep
o 7.00" (178 mm) Pilot Diameter
High Capacity PTO Thrust Bearing (500-lb Thrust Load – Pull on Crank)
48
22.0/19.5 HP (Horizontal Shaft) V-Twin Carbureted Propane/Natural Gas
Standard Command PRO Features: High Efficiency Overhead Valve Design
Zero Maintenance Hydraulic Valvetrain
Cast-Iron Cylinder Liners
High Efficiency, Low-Noise Cooling Fan
Full Pressure Lubrication System to all Bearings
Hardened, Micro-Polished, Dynamic-Balanced Crankshaft
Easy-to-Identify Yellow Oil Service Points for Valve Cover Oil
Fill and Dipstick
International Emissions Certifications
3 year Unlimited Hour Commercial Warranty
Model Features:
Designed to operate on both Propane or Natural Gas Fuels
o Rated per SAE J1940 22 HP on Propane and 19.5
on Natural Gas
Easy Start with Digital Spark Advance Ignition and High Torque Solenoid Shift Starter
Kohler Low Profile, Dual-Element Air Cleaner System
15 Amp Regulated Charging System
Low Oil Pressure Sentry Protection
Engine-Mounted Oil Cooler
Low Pressure Fuel Regulator Included as Accessory – Not mounted to engine
o Note: Customer supplies High Pressure Fuel Regulator for Propane usage (if applicable)
See Page 45 for Exhaust System Kits
HP Model Spec Number List Price Approx Ship Weight (lbs) 22.0/19.5 CH740LP/NG CH740-0101 $1960.12 108 Spec-Specific Features:
Ideal for Industrial Utility and Well-Gas Applications
Crankshaft PTO
o 1.125" (28.5 mm) Diameter x 3.996" (101.5 mm) PTO Length
o 0.250" (6 mm) Keyway
o Drilled and Tapped 1.5" (38 mm) Deep, 7/16-20 UNF-2B
PTO Mounting Face
o 5.625" (143 mm) Diameter (4 Holes) 3/8-16 UNC-2B x 0.67" (17 mm) Deep
o 7.75" (197 mm) Diameter (4 Holes) 7/16-14 UNC-2B x 0.83" (21 mm) Deep
o 7.00" (178 mm) Pilot Diameter
High Capacity PTO Sleeve Bearing (2000 in-lbs Side Load)
Engine-Mounted Keyswitch, Application-Mounted Throttle Controls
3750 rpm high idle setting, 1200 rpm low idle setting
49
22.0/19.5 HP (Horizontal Shaft) V-Twin Carbureted Propane/Natural Gas
HP Model Spec Number List Price Approx Ship Weight (lbs) 22.0/19.5 CH740LP/NG CH740-3104 $2099.79 108 Spec-Specific Features:
Configured for 60 hz Generator Set Applications
Crankshaft PTO
o 3.937" (100.0 mm) PTO Length
o 0.872" (22.1 mm) Gage Diameter @ 0.755” (19.2 mm) from end of shaft
o 2.25" Taper per foot (1.88mm Taper per cm)
o Drilled and Tapped 0.625" (16 mm) Deep, 5/16-24 UNF-2B
PTO Mounting Face
o 5.625" (143 mm) Diameter (4 Holes) 3/8-16 UNC-2B x 0.67" (17 mm) Deep
o 7.75" (197 mm) Diameter (4 Holes) 7/16-14 UNC-2B x 0.83" (21 mm) Deep
o 7.00" (178 mm) Pilot Diameter
3750 rpm high idle setting
5% Governing
HP Model Spec Number List Price Approx Ship Weight (lbs) 22.0/19.5 CH740LP/NG CH740-3103 $2099.79 108 Spec-Specific Features:
Configured for 50 hz Generator Set Applications
Crankshaft PTO
o 3.937" (100.0 mm) PTO Length
o 0.872" (22.1 mm) Gage Diameter @ 0.755” (19.2 mm) from end of shaft
o 2.25" Taper per foot (1.88mm Taper per cm)
o Drilled and Tapped 0.625" (16 mm) Deep, 5/16-24 UNF-2B
PTO Mounting Face
o 5.625" (143 mm) Diameter (4 Holes) 3/8-16 UNC-2B x 0.67" (17 mm) Deep
o 7.75" (197 mm) Diameter (4 Holes) 7/16-14 UNC-2B x 0.83" (21 mm) Deep
o 7.00" (178 mm) Pilot Diameter
3150 rpm high idle setting
5% Governing
50
23-25 HP (Horizontal Shaft) V-Twin Propane EFI
Standard Command PRO Features:
High Efficiency Overhead Valve Design
Zero Maintenance Hydraulic Valvetrain
Cast-Iron Cylinder Liners
High Efficiency, Low-Noise Cooling Fan
Full Pressure Lubrication System to all Bearings
Hardened, Micro-Polished, Dynamic-Balanced Crankshaft
Variable Speed Governor
Easy-to-Identify Yellow Oil Service Points for Valve Cover Oil
Fill and Dipstick
International Emissions Certifications
3 year Unlimited Hour Commercial Warranty
Model Features:
Kohler Closed-Loop Electronic Fuel Injection (EFI) for
Propane Fuel
Drop-in-Place Design
o Engine-Mounted Electronic Control Unit (ECU)
o Engine-Mounted Propane Fuel Pressure Regulator for Vapor Withdrawal
Easy Start with 12V High Energy Electronic Ignition and High Torque Solenoid Shift Starter
High Capacity In-Line Fuel Filter
20 Amp Regulated Charging System
High Capacity PTO Sleeve Bearing (2000 in-lbs Side Load Capacity)
PTO Mounting Face
o 5.625" (143 mm) Diameter (4 Holes) 3/8-16 UNC-2B x 0.67" (17 mm) Deep
o 7.75" (197 mm) Diameter (4 Holes) 7/16-14 UNC-2B x 0.83" (21 mm) Deep
o 7.00" (178 mm) Pilot Diameter
3800 rpm high idle setting, 1500 rpm low idle setting
Closed-Loop Oxygen Sensor Included
Approximate shipping weight = 108 lbs
See Page 45 for Exhaust System Kits
Crankshaft PTO
o Option 1
1.125" (28.5 mm) Diameter x 3.996" (101.5 mm) PTO Length
0.250" (6.3 mm) Keyway
Drilled and Tapped 1.5" (38 mm) Deep, 7/16-20 UNF-2B
o Option 2
1.437" (36.5 mm) Diameter x 4.457" (113.2 mm) PTO Length
0.375" (9.5 mm) Keyway
Drilled and Tapped 1.5" (38 mm) Deep, 5/8-18 UNF-2B
51
23-25 HP (Horizontal Shaft) V-Twin Propane EFI
Spec-Specific Features:
Low Profile, Dual-Element Air Cleaner System
Engine-Mounted Keyswitch and Throttle Controls
HP Model Spec Number List Price Crankshaft Option 23 PCH680 PCH680-3003 $2,999.85 Option 1 (1.125” Dia) 23 PCH680 PCH680-3004 $2,999.85 Option 2 (1.437” Dia) 25 PCH740 PCH740-3004 $3,129.85 Option 1 (1.125” Dia) 25 PCH740 PCH740-3005 $3,129.85 Option 2 (1.437” Dia) Spec-Specific Features:
Low Profile, Dual-Element Air Cleaner System
Application-Mounted Keyswitch and Throttle Controls
HP Model Spec Number List Price Crankshaft Option 25 PCH740 PCH740-3007 $3,054.85 Option 1 (1.125” Dia) 25 PCH740 PCH740-3008 $3,054.85 Option 2 (1.437” Dia)
Spec-Specific Features:
Heavy-Duty, Dual-Element Canister Air Cleaner System
Engine-Mounted Keyswitch and Throttle Controls
HP Model Spec Number List Price Crankshaft Option 23 PCH680 PCH680-3001 $3,099.85 Option 1 (1.125” Dia) 23 PCH680 PCH680-3002 $3,099.85 Option 2 (1.437” Dia) 25 PCH740 PCH740-3001 $3,229.85 Option 1 (1.125” Dia) 25 PCH740 PCH740-3003 $3,229.85 Option 2 (1.437” Dia) Spec-Specific Features:
Heavy-Duty, Dual-Element Canister Air Cleaner System
Application-Mounted Keyswitch and Throttle Controls
HP Model Spec Number List Price Crankshaft Option 25 PCH740 PCH740-3002 $3,154.85 Option 1 (1.125” Dia) 25 PCH740 PCH740-3006 $3,154.85 Option 2 (1.437” Dia)
52
22-24 HP (Vertical Shaft) V-Twin Propane EFI
Standard Command PRO Features:
High Efficiency Overhead Valve Design
Zero Maintenance Hydraulic Valvetrain
Cast-Iron Cylinder Liners
High Efficiency, Low-Noise Cooling Fan
Full Pressure Lubrication System to all Bearings
Hardened, Micro-Polished, Dynamic-Balanced Crankshaft
Variable Speed Governor
Easy-to-Identify Yellow Oil Service Points for Valve Cover Oil Fill
and Dipstick
International Emissions Certifications
3 year Unlimited Hour Commercial Warranty
Model Features:
Kohler Closed-Loop Electronic Fuel Injection (EFI) for Propane Fuel
Drop-in-Place Design
o Engine-Mounted Electronic Control Unit (ECU)
o Engine-Mounted Propane Fuel Pressure Regulator for Vapor Withdrawal
Kohler Heavy-Duty Dual-Element Canister Air Cleaner System
Easy Start with 12V High Energy Electronic Ignition and High Torque Solenoid Shift Starter
High Capacity In-Line Fuel Filter
Closed-Loop Oxygen Sensor Included
See Page 41 of the 2012 Price List for Exhaust System Kits
HP Model Spec Number List Price Approx Ship Weight (lbs) 24 PCV740 PCV740-3003 $3199.00 108 Spec-Specific Features:
20 Amp Regulated Charging System
Crankshaft PTO
o 1.125" (28.5 mm) Diameter x 4.457" (113.2 mm) PTO Length
o 0.250" (6.3 mm) Keyway
o Drilled and Tapped 1.5" (38 mm) Deep, 7/16-20 UNF-2B
High Capacity PTO Sleeve Bearing (2000 in-lbs Side Load)
3800 rpm high idle setting, 1800 rpm low idle setting
Designed for Application-Mounted Throttle and Keyswitch Controls
RFI compliant
Chopper Grass Screen with Metal Fixed Guard
Grass Clean-out Panels
53
22-24 HP (Vertical Shaft) V-Twin Propane EFI
HP Model Spec Number List Price Approx Ship Weight (lbs) 22 PCV680 PCV680-3003 $2999.00 108 Spec-Specific Features:
20 Amp Regulated Charging System
Crankshaft PTO
o 1.000" (25.4 mm) Diameter x 3.56" (90.5 mm) PTO Length
o 0.250" (6.3 mm) Keyway
o Drilled and Tapped 1.5" (38 mm) Deep, 5/8-18 UNF-2B
High Capacity PTO Sleeve Bearing (2000 in-lbs Side Load)
3650 rpm high idle setting, 1800 rpm low idle setting
Designed for Application-Mounted Throttle and Keyswitch Controls
RFI compliant
Chopper Grass Screen with Metal Fixed Guard
Grass Clean-out Panels
54
FOR SALES AND SERVICE INFORMATION IN U.S. AND CANADA, CALL 1-800-544-2444 KohlerEngines.com ENGINE DIVISION, KOHLER CO., KOHLER, WISCONSIN 53044 © 2013 by Kohler Co. All rights reserved.
FORM NO.: TP-2389-T ISSUED: 01/14 REVISED: