PRICE LIST - Sable Engineeringsable.net.au/.../2013/05/Downee-Catalogue-July2011.pdf · PRICE LIST...

T R A D E PRICE LIST

excluding GST

®

Downee®

A Division ofRMD Industries Pty LtdABN 31 004 313 937

downee.com.au 3

© COPYRIGHT 2011 DOWNEE SUBJECT TO CHANGE WITHOUT NOTICE ALL DIMENSIONS IN MILLIMETERS UNLESS OTHERWISE STATED SPECIFICATIONS

Effective July 2011

Table of contentsFence fittings 5

Chain mesh 5Temporary fence 8Tubular 9

Gate fittings 12Cantilever 12Sliding gate 13Swinging gate 15Gate latches 19Sliding gate kits 21

Automation 21Sliding gates 21Swing gate 22Boom gates 23Accessories 24Racks for sliding gates 25

Decorative fittings 26Spears - aluminium 26 Picket tops - aluminium 27Post caps - aluminium 28Lattice - aluminium 29

Industrial sliding door components 30

Industrial shutter door components 32

Rural 33Timber Post Fittings 33Weld on fittings 34Catches and latches 34Stockyard components 35Farmgate Packs 36

Building hardware 37

Fasteners & paints 38

Shading systems 39

Safety gate 40Latches 40Hinges 40

®

Provide excellence in customer service through the following core behaviours:

1. Listen to our customers to fully understand their needs and business objectives.

2. Deliver the right solutions on time. Quality products at fair and competitive prices, supported with sound technical advice.

3. Prosper to enable investment in product development and to provide unique solutions for tomorrow.

VISIONDownee aims to be the preferred supplier of fencing and hardware components to trade customers throughout Australia and New Zealand. Key elements to our success are market knowledge and understanding, product innovation and motorised integration.

PRINCIPAL VALUES

Since 1953 Downee has led the development and innovation of gate and fence hardware, supplying the trade and retail industries with quality products that are built to last.

Today Downee, a subsidiary of RMD Industries Pty Ltd, has grown to be one of the largest, most trusted suppliers of gate and fencing products & accessories in Australia and New Zealand.

100% Australian owned and operated, with offices and warehouses in Sydney, Brisbane, Perth, Adelaide and Auckland, Downee’s headquarters and National Distribution Centre is based in Melbourne.

Downee components will add quality to your workmanship and will help you succeed in the marketplace.

ABOUT DOWNEE

Effective July 2011

Downee®

A Division ofRMD Industries Pty Ltd

ABN 31 004 313 937 downee.com.au4

© COPYRIGHT 2011 DOWNEE SUBJECT TO CHANGE WITHOUT NOTICEALL DIMENSIONS IN MILLIMETERS UNLESS OTHERWISE STATED SPECIFICATIONS

DISCOUNT STRUCTUREBRANCHES

Head Office 6-10 Market Road, Sunshine VIC 3020T: 03 9364 8288 F: 03 9311 2030Postal address:PO Box 605, Sunshine VIC 3020E: [email protected]

VICTORIA SALES12 Second Avenue, Sunshine VIC 3020T: 03 9300 5160 F: 03 9311 2030E: [email protected]

NEW SOUTH WALES SALES2 Ross Place, Wetherill Park NSW 2146T: 02 8785 5800 F: 02 9831 7944E: [email protected]

QUEENSLAND SALES74 Achievement Crescent, Acacia Ridge QLD 4110T: 07 3373 8511 F: 07 3373 8799E: [email protected]

SOUTH AUSTRALIA & NORTHERN TERRITORY SALES505 Cross Keys Road, Cavan SA 5094T: 08 8349 7339 F: 08 8349 7449E: [email protected]

WESTERN AUSTRALIA SALES45 Millrose Drive, Malage WA 6090T: 08 9209 3700 F: 08 9209 3693E: [email protected]

FREIGHT TERMS:Minimum order values apply for free and are determined by region. Long product is also subject to addictional freight charges.

EFT PAYMENT DETAILS:ACCOUNT NAME: RMD INDUSTRIES PTY LTDBSB: 083-355 ACCOUNT NUMBER: 515168064

Fence fittingsChain mesh

Temporary fence

Tubular

Gate fittingsCantilever

Sliding gate

Swinging gate

Gate latches

AutomationSliding gate

Swing gate

Boom gates

Accessories

Racks for sliding gates

Decorative fittingsSpears and Post tops

Lattice

Industrial sliding door componentsIndustrial shutter door componentsRuralBuilding hardwareFasteners & paintsShading systemsSafety gate

Latches

Hinges

Downee®


downee.com.au 5


Effective July 2011

CHAIN MESH

Universal Rail Clamps - Galvanised

Code Butt CtnUFFB25 25 40UFFB32 32 30UFFB40 40 30UFFB50 50 20

• Australian Patented

Universal Post Clamps - Galvanised

Code Thru CtnUFFT25 25 50UFFT32 32 40UFFT40 40 40UFFT50 50 40UFFT65 65 30UFFT80 80 20UFFT100 100 20

• Australian Patented

Universal Connector - Galvanised

Code CtnUFFMPC 100

• Multi-purpose connector suitlable with all post and rail clamps.

• Use for multi staying of posts, corner struts, raked fences and all add-on fencing situations.

• Design Registrations apply.

Wall Bracket Assembly - Galvanised

Code CtnUFFWB 50

• Used with UFFB and UFFT (all combinations) for spacing and securing post from wall. Allows easy access for wire lacing and close fitment of post to wall

• Comprises: 1 x G14 - 1 Adjustable Bracket 2 x Spacer Washers 1 x M10x40 Bolt

Fence Fittings

UNIVERSAL FENCE FITTING SYSTEM

INSTALLATION NOTES:1. ALL RAIL CLAMPS ARE COMPLETELY INTERCHANGEABLE WITH ALL POST CLAMPS.2. FOR NEATINESS OF INSTALLATION POST CLAMP ATTACHMENT EAR IS HIDDEN BY FIRST RAIL CLAMP.

2,3,4 & UP TO 8 WAY ADJUSTABLE FITTING COMBINATIONS POSSIBLE

VERTICAL RAIL ADJUSTMENT FROM 30˚ TO 150˚ FOR FENCING UP SLOPES OR ADDING MULTIPLE INTEGRAL STAYS.

APPLICATIONSSPORT OVALS - RACECOURSES - MULTI FACETED FENCES - IRREGULARLY SHAPED ENCLOSURES - MULTIPLE ENCLOSURES FENCING INTO TIGHT CORNERS - TENNIS COURTS - CRICKET NETS - BASEBALL NETS - SHADE STRUCTURES - FENCING UP SLOPES

Effective July 2011

Downee®




Fence FittingsCHAIN MESH

Code Thru/Butt CtnT1515 15/15 150T2020 20/20 100T2025 20/25 70T2525 25/25 50T2532 25/32 40T2540 25/40 30T3225 32/25 40T3232 32/32 40T3240 32/40 20T3250 32/50 20T4025 40/25 40T4032 40/32 30T4040 40/40 20T4050 40/50 10T5025 50/25 30T5032 50/32 30T5040 50/40 20T5050 50/50 10T6550 65/50 10T8025 80/25 10T8032 80/32 10T8040 80/40 10T8050 80/50 10

Fixed T’s - Galvanised

• Bolts and nuts included

Fixed Crosses - Galvanised

Code Butt/Thru CtnX2020 20/20 50X2525 25/25 30X2532 25/32 20X2540 25/40 30X2550 25/50 20X3232 32/32 20X3240 32/40 20X3250 32/50 10X4040 40/40 20X4050 40/50 10X5050 50/50 10X5065 50/65 10


Fixed Corners - Galvanised

Code Butt/Thru CtnC2020 20/20 40C2525 25/25 30C2532 25/32 20C2540 25/40 20

C2550 25/50 20C3232 32/32 20C3240 32/40 10C3250 32/50 10C4040 40/40 10C4050 40/50 10C5050 50/50 5


All fittings on this page available in powder coated black for an extra

$2.50ea. MOQ - 1 ctn

Lead times may apply

Code Pipe CtnK19GB 19 1000K20GB 20 300K25GB 25 150K32GB 32 100K40GB 40 80K50GB 50 50K65GB 65 50K80GB 80 40K90GB 90 40K100GB 100 20K125GB 125 20

K150GB 150 10

Round Post Caps - Galvanised - Galvabond

Pipe Straps - Tight Fit - Galvanised

Code Pipe/Width CtnS1T 20/25 100S2T 25/25 70S3T 25/40 30S4T 32/40 30S5T 40/40 30

Code Pipe CtnK20 20 200K25 25 150K32 32 100K40 40 80K50 50 50K65 65 30K80 80 20K90 90 40K100 100 20

Galvanised

Galvabond

Speedee Sleeve - External Pipe Joiners - Galvanised

Code Pipe Length CtnSS25 25 200 30SS32 32 200 25SS40 40 200 20SS50 50 200 10

• Registered Design

CHAIN MESH

Downee®


downee.com.au 7


Effective July 2011

Oval Flanges - Galvanised

Code Pipe CtnF20 20 100F25 25 100F32 32 50F40 40 30F50 50 30

Round Flanges - Galvanised

Code Pipe CtnF32R 32 20F40R 40 20F50R 50 20

Fence Fittings

Heavy Duty Square Flanges - Galvanised

Code Pipe CtnF32H 32 30F40H 40 30F50H 50 20

CHAIN MESH CHAIN MESHHinges - Galvanised

Code Post/Gate CtnH5025D 50/25 20H8025D 80/25 10H8032D 80/32 10

Pipe Hinge Straps - Galvanised

Code Pipe/Width CtnS1 20/25 100S2 25/25 50S3 25/40 30S4 32/40 30S5 40/40 30S6 50/40 30

Code Suit CtnA1 S1 200A2 S2 200

A3 S3 100A4 S4 100

Hinge Strap Attachments - Galvanised

Code Post/Gate CtnH2020 20/20 30H2525 25/25 20H3220 32/20 20H3225 32/25 20H4020 40/20 20H4025 40/25 20

Clamp-On

Clamp-On

Code Post/Gate Ctn

H4032 40/32 20H5020 50/20 20H5032 50/32 20

Two Part Hinge + Attachment

Two Part Interlocking Hinge + Attachment

Two Part Hinge + Attachment

Two Part Interlocking Hinge + Attachment

Code Post/Gate CtnH8040 80/40 10H10025 100/25 10H10032 100/32 10H10040 100/40 10

Strap Type Hinges + Attachment

Strap Type Hinge + Attachment

Code Suits CtnBP1 S1 100BP2 S2 100BP3 S3 100BP4 S4 100

Backing Plates - Galvanised

• Use with Pipe Hinge Straps

Long Plate Gudgeons - with Plastic Bush - Galvanised

Code Pipe CtnG12 20 40

G13 25 40

G15 32 40


G22 25 50

G23 32 30

Heavy Duty Short Plate Bolt Gudgeon - 50mm Steel Pin - Galvanised


G41 25 50

G43 32 40

Light Duty Short Plate Gudgeon with Plastic Bush - Galvanised

Effective July 2011

Downee®




Drop Bolts - Galvanised

Code Size CtnGDB260 260x16ø 20GDB370 370x16ø 20GDB430 430x20ø 10GDB600 600x16ø 10GDB850 850x16ø 10

• Lugs not included

Flag Pin Drop Bolts - Galvanised

Code Size CtnFPDB900 900x16ø 5FPDB1050 1050x16ø 5FPDB1200 1200x16ø 5FPDB1500 1500x16ø 5


Security Drop Bolts - Galvanised


Drop Bolt Lugs - Galvanised

Gate Entry Brace & Shoot Bolt - Galvanised

Code Length CtnGEB12 190x110x12ø 30

Fence Fittings

Code Length CtnB8 190 40B9 270 20

Shoot Bolt - Galvanised

Corner Bar

CHAIN MESH TEMPORARY FENCETemporary Fence Clamps - Galvanised

Code Pipe CtnTFCN2525 25x25 50TFCN3232 32x32 20TFCN4040 40x40 20TFCN5050 50x50 20

Temporary Fence Clamp Hinge - Galvanised

Code Pipe MinimumTHC4025 40x25 20THC4040 40x40 10THC5050 50x50 10

• MADE TO ORDER ONLY

Code Size CtnFPDS900 900x16ø 5FPDS1200 1200x16ø 5

Code Size CtnL2 16ø 200prsL3 20ø 150prs

• Round 1 x Plain + 1 x Slotted

Wire Strainer

Code Description Ctn12106 Wire strainer 200

Downee®


downee.com.au 9


Effective July 2011

Fence Fittings

Square Tube Caps - Domed

Round Tube - Plastic Caps - Polypropylene

Galvabond

Cast AluminiumCode Tube CtnPC5 50x50 100PC6 65x65 100

Square Tube Caps - Flat - Galvabond

Code Tube CtnK90MSGBF 90x90 20K100MSGBF 100x100 30

Code PipePC16BL ø16x1.2-1.6PC19BL ø19x1.2-1.6PC22BL ø22x1.2-1.6PC25BL ø25x1.2-1.6PC28BL ø28x1.2-1.6PC32BL ø32x1.2-1.6PC50BL ø50x1.2-1.6

Square Tube Plastic Caps - Domed - Polypropylene

Code Tube CtnPC5050BL 50x50x2.0-2.5 50PC6060BL 60x60x2.0-2.5 70PC6565BL 65x65x2.0-2.5 40

Profile - Square Tube

Square Tube Plastic Caps - Flat - Polypropylene

Code Pipe ThicknessPC1212BL 12x12 1.6PC1919BL 19x19 1.2-1.6

PC2525BL 25x25 1.2-1.6PC3030BL 30x30 1.2-1.6PC3535BL 35x35 1.6

PC3825BL 38x25 1.2-1.6PC4040BL 40x40 1.6PC5025BL 50X25 1.2-1.6PC5050FLAT 50x50 1.6-2.0PC5735BL 57x35 1.6PC6438BL 64x38 1.6-2.0

PC6535BL 65x35 2.0PC7550F 75x50 1.6-2.0PC10050F 100x50 1.6-2.0PC15050F 150x50 1.6-2.0

TUBULAR TUBULAR

Code PipeIPC25NB 25NBIPC32NB 32NBIPC40NB 40NBIPC50NB 50NBIPC50OD 50ODIPC65NB 65NBIPC90NB 90NB

Plain Caps

Deluxe Ribbed Caps

Code Pipe ThicknessIPC2525 25x25 1.0-3.0

IPC4040 40x40 2.6-4.0IPC4040-1 40x40 1.0-3.0IPC5025 50x25 1.25-3.0IPC5050 50x50 0.8-3.0IPC5050-5 50x50 3.0-5.0IPC6060 60x60 1.6-3.5

IPC6565 65x65 2.0-4.5IPC7525 75x25 1.0-3.0IPC7550 75x50 1.6-4.0IPC7575 75x75 2.0-4.5IPC7638 76.2x38.1 1.2-3.5IPC8040 80x40 1.0-3.0IPC9090 90x90 3.0-5.0IPC10050 100x50 1.6-4.0IPC100100 100x100 1.0-4.0IPC125125 125x125 3.0-6.0IPC150150 150x150 3.0-6.0

Plain Caps

Deluxe Ribbed Caps

Code Tube CtnK25MSGB 25x25 300K35MSGB 35x35 150K40MSGB 40x40 150K50MSGB 50x50 100K60MSGB 60x60 50K65MSGB 65x65 50K75MSGB 75x75 60K90MSGB 90x90 20K100MSGB 100x100 30K150MSGB 150x150 ea

Effective July 2011

Downee®




Rail Brackets - Single Lug - Steel - Zinc Plated

Fence Fittings

Code Rail Holes CtnRFB2525-2Z 25x25 2 100RFB3030-2Z 30x30 2 100RFB3825-2Z 38x25 2 100

Rail Brackets - Double Lug - Steel - Zinc Plated

Code Rail Holes CtnDFB2525-2Z 25x25 2 100DFB3030-2Z 30x30 2 100DFB3030-2DZ 30x30 2 Diag 100DFB3825-2Z 38x25 2 100DFB3825-2DZ 38x25 2 Diag 100DFB4040-2Z 40x40 2 100DFB4040-2DZ 40x40 2 Diag 100DFB4040-4Z 40x40 4 100

Code Rail CtnRBA2525 25x25x1.2-1.6 50

Rail Brackets - Cast Aluminium

Adjustable Rail Bracket & Adaptor

Code Rail CtnAD3030 30x30x1.2-1.6 100AD3825 38x25x1.2-1.6 100AD4040 40x40x1.2-1.6 100

Adjustable Rail Bracket - 2 Fixing Holes

Adaptors - Click Fit to Rail Bracket

• For 30x30, 38x25 & 40x40 rails an appropriate adaptor attached to rail bracket is required.

• Australian Design Registered

Code Rail CtnFB25H 25x25 180FB30H 30x30 150FB32H 32x32 150

Horizontal - Single Lug - 1 Fixing Hole

Code Rail CtnFB38H 38x25 120

Horizontal - Single Lug - 2 Fixing Holes

Code Rail CtnFB38P 38x25 90FB40P 40x40 80

Plain - Single Lug - 2 Fixing Holes

FB25H

FB38H

FB40P

FB38MD

Code Rail Ctn

FB40X8P 40x8 200FB40X10P 40x10 200

Plain - Single Lug - 1 Fixing Hole

FB40X8P

Code Rail CtnFB25V 25x25 180FB30V 30x30 150FB32V 32x32 150FB38V 38x25 120

Vertical - Single Lug - 1 Fixing Hole

FB25V

FB50P Code Rail CtnFB50P 50x50 25

Plain - Single Lug - 2 Fixing Holes

Rail Brackets -Cast Aluminium

Code Rail CtnFB25HDL 25x25 150FB30HDL 30x30 130

Horizontal - Double Lug - 2 Fixing Holes

FB25HDL

Code Rail CtnFB38HDLO 38x25 120

Horizontal - Offset Lug - 3 Fixing Holes

FB30HDLO

Code Rail CtnFB2538PDL 25x38 90

Plain - Double Lug - 2 Fixing Holes

FB2538PDL


Plain - Double Lug - 4 Fixing Holes

FB40PDL


Plain - Double Lug - 4 Holes + Security Fixing Hole

FB50PDL

Code Rail CtnFB31.8R 31.8mm 120

Round

FB31.8R

TUBULAR TUBULAR

Code Rail CtnFB38MD 38x25 100

Multi-direction - Single Lug - 2 Fixing Holes

* 15o Vertical 6o Horizontal

Security Rail Brackets - Galvanised

Code Tube CtnSRB620-92 40x40 50SRBA628-92* 40x40 50

Code CtnCUSMS 200

Cover Sleeve - To Suit SRB620-92

Rail Tube End Bracket - Galvanised

Code Suits Ctn

TEB3825 38x25x1.6 100

Rail Tube End Brackets - Plastic - Black

Code Suits CtnPEC3825BL 38x25x1.6 500

• *Adjustable.• *attach to post and rail by pop rivetting.

Downee®


downee.com.au 11


Effective July 2011

Fence Fittings

Rail Angle Brackets

Code Finish CtnUC8/10 Galvabond 500UC8/10G Galvanised 500UC19G Galvanised 500

Fence Panel ‘U’ Clips

‘U’ Clip/Panel Fixing Kit

• Contains 20 of UC8/10G and 20 14x10x25 self drilling screws.

TUBULAR TUBULAR

Code Material SizeRAB2030A ALU 20x30x20RAB3030 GAL 30x30x20RAB30x30A ALU 30x30x20RAB35X35 GAL 36x36x20RAB3535A ALU 36x36x20RAB3050 GAL 30x50x20G14 GAL 114x50x5

Timber Rail Joiner Bracket - Galvabond

Code Dimensions CtnJ7154 120x7x54 50

Rail Joiners - Galvabond

Code Suits CtnRJ3825 38x25x1.6 50

Rail Plates - Galvanised

Code Size CtnG86 153x40x5 50

Rail Saddles - Galvabond

Code Suits CtnRS3825 38x25 100

RS4040 40x40 100

Timber Rail Holder Bracket - Galvanised

Code Suits CtnRHB7553P 75x53 Timber 60

Post Brackets - 50x50x1.6 Tube - Galvanised

Code Type CtnPB130-C 4 hole, centered 4PB130-O 4 hole, offset 4

Code Type CtnPB13050 2 hole 10

Code Size Holes CtnF100SP 100x100x5 4 40F130SP 130x130x5 4 20RFP11350-2 113x50x5 2 20RFP15075-2 150x75x5 2 30RFP20095-2 200x95x8 2 10RFP13090-4 130x90x5 4 20RFP150100-4 150x100x5 4 20

Galvanised

Code Size Holes CtnRFP13080-2 130x80x5 2 30RFP130100-4 130x100x5 4 20RFP130130-4 130x130x10 4 10

Zinc Plated

Shark Fin - Galvanised

Code Base CtnSF1 150x100 5

Flange Plate - Weld on

Code Base Size CtnF130S50 130x130x5 20

Square Post Extensions

Code Suits Length CtnPEXT50 50x50mm 350mm 10

Code CtnFITS/TEK20PP 60

Base cover

Code CtnPLASTICBLA 30

• Comes ready to fit 38x25 posts. Snap out panels allow fittings to suit 40x25, 40x40, and 50x50 posts.

• Suits RFP11350-2 Flange Plate.

Effective July 2011

Downee®




Gate Fittings

End Cup

Code TypeCGS-346M smallCGS-346P mediumCGS-346G large

Adjustable Tension Bar

Code suitsCGI-40 54mm internal SHS

Adjustable End Bracket

Code WidthCG-30M 53-76mmCG-30P 86-114mmCG-30G 103-150mm

End Wheels


Code Type Length WidthCGS-345M small 3000 68CGS-345M-6 small 6000 68CGS-345P medium 3000 100CGS-345P-6 medium 6000 100CGS-345G large 3000 140CGS-345G-6 large 6000 140

CANTILEVER CANTILEVERCANTILEVER WHEELS PRO-RANGE for gates up to 3Ton/18m opening


Code TypeCGS-350.8M smallCGS-350.8P mediumCGS-350.8G large

5 Wheel Carriages

8 Wheel Carriages

Adjustable Angle Bracket for End Cup

CodeCG-15MCG-15PCG-15G

CANTILEVER RESIDENTIAL KIT

CodeCGS-150KIT

KIT INCLUDES:2 x 5 wheel carriages1 x 6m track (or 2 x 3m track)1 x end cup1 x end wheel4 x top rollers

CANTILEVER WHEELS STANDARD RANGE for gates up to 2Ton/12m opening

Code TypeCGS-250.5P mediumCGS-250.5G large

5 Wheel Carriages

CANTILEVER TRACK

Need help in choosing the right cantilever components?

Ask your Downee sales representative for a custom made cantilever project, inclusive of list of components and size of concrete pad.

Alternatively, email [email protected] with the size of opening and weight of material to receive your custom project quotation.

DOWNEE TECHNICAL SUPPORT LINE: 1800 241 733

Motor base plate for Cantilever residential KIT

Code to suitMH-150BASE MH-SL1S and MH-SL10

Suitable for residential gates up to: 4m x 200Kg or 3m x 300Kg

CANTILEVER COMMERCIAL KIT

CodeCGS-COMKIT

KIT INCLUDES:2 x CGS-350P2 x CGS-347P2 x CGS-346P1 x CGS-345P1 x CGS-345P-6

Suitable for commercial gates up to: 6m x 450Kg

CANTILEVER INDUSTRIAL KIT

CodeCGS-INDKIT

KIT INCLUDES:2 x CGS-350P2 x CGS-347P2 x CGS-346P2 x CGS-345P-6

Suitable for industrial gates up to: 9m x 600Kg

Downee®


downee.com.au 13


Effective July 2011

Gate FittingsSLIDING GATE SLIDING GATE

Bolt Down Track, 20mm Wheel - Galvanised

Code size BundleSGT3 3000 x 3 mm 50SGT4 4000 x 3 mm 50SGT6 6000 x 3 mm 50

Concrete-in Track, 20mm Wheel - Galvanised

Code size Bundle287/20CT 3000 x 3mm 54287/20CT-6 6000 x 3 mm 54

Concrete-in track, 20mm Wheel - Galvanised

Code size Bundle287G19 3000 x 4 mm 54

• Can be used with 287FP-G

Code Suits287FP-G 287G19

Recess Kit for 287G19 Track

• To be used with 287G19

2 Ball Bearing Round Wheel with Support - 20mm round track

Code Rating Dia Ctn300550 300kg 90ø 6430/100 380kg 100ø 6300551H 400kg 120ø 6

1 Ball Bearing Wheel with external support - 20mm round track

Code Rating Dia Ctn327-80S 200kg 80ø 6

Code Suits Ctn297G 287G19 10

Track Joiner

Code Suits Ctn300504 287/20CT 10

Grease Gun Twin Wheels - 20mm Track

Code Rating Dia Ctn339-120 1200kg 120ø 2

• 4 Ball bearing each set

1 Ball Bearing Round Wheel with Support - 20mm round track


Code Rating Dia Ctn300550SS 300kg 90ø 2


Wheel - 1 ball bearings - 20mm track

Wheel - 2 ball bearings- 20mm track

Code Rating Dia Ctn300551 450kg 120ø 6300552 575kg 160ø 2300553 625kg 200ø 2

Stainless steel

Code sizeSGT3SS 3000 X 3 mm

Stainless steel

Effective July 2011

Downee®




Code Size Ctn300558 40x60mm 2023030 30x40mm 20

Top Roller

Code Size Ctn300557 37x36mm 20

Gate FittingsSLIDING GATE SLIDING GATE

Single Roller Guide - Adjustable “U” Type

Code Adjustability CtnCG-253M 165-185 2CG-253P 185-215 2CG-253G 210-250 2

Double Roller Guide- Adjustable

Code Ctn25530 ea

Code CtnCG-251 ea

Single Roller Guide

Code CtnCG-252 2

Guide Block with angle slide plates

Code Size Ctn080MR30 60x75x70 eaNYBLOC 98x92x59 ea

Big Nylon Roller - to be screwed - Zinc Plated

Code Size Ctn253-40 3

Parrot Beak Lock Kit

Code Frame Size CtnPBL40KIT suit 40 mm post 5PBL50KIT suit 50 mm post 5

1 Ball Bearing Wheel with Support - 16mm round track


2 Ball Bearing Wheel with Support - V Groove Track


Stops

Code Type300507 Weld on stop

Code Type300507B Bolt on stop

• Roller size 30x40

• Roller size 40x60

Downee®


downee.com.au 15


Effective July 2011

Gate Fittings

Bottom Hinge with Thrust Bearing*

Code Rating Size Ctn87PST-P 200kg 45 287PST-M 350Kg 50 287PST-G 500Kg 70 287XL 4000kg adjustable 1

Upper Hinge with L Plate*

Code Rating Size Ctn85L-M 350kg 50 485L-G 500kg 70 2

Upper Hinge Double Adjustment with Plate*

Code Rating Size Ctn85PST-M 350kg 50 485PST-G 500Kg 70 285XL 4000Kg Adjustable 1

Code Rating Size Ctn85W-M 450kg 50 485W-G 650kg 70 2

Upper Hinge*

Code Rating Size Ctn86W-P 200kg 45 2

86W-G 650kg 70 286IW-G*

Upper Hinge with L Plate*

Code Rating Size Ctn86L-P 200kg 45 286L-G 500kg 70 2

SWINGING GATE SWINGING GATE

Bottom Hinge with Thrust Bearing*

Code Rating Size Ctn87W-M 450kg 45 487W-P 200kg 50 487W-G 650Kg 70 2

Hinge - with Wing & Bearing*

Code Rating Ctn92-G 300kg 10

Adjustable Pintle Hinge

Code Ctn100G 200kg 10100P 100kg 20

Code Rating Size Ctn87IW-G 650kg 70 2

Stainless steel

Upper Hinge Double Adjustment*

Hinge with “U” Bolt and Plate - to be screwed

Code Rating Ctn100PST-P 100kg 20

Hinge with Wing and Plate*

Code Rating Ctn94-P 200kg 2094-G 300kg 10

Code Rating Ctn96-G 300Kg 10

with bearing

* Stainless Steel

Bottom Hinge with Thrust Bearing and L Plate*

Code Rating Ctn87L-P 200Kg 487L-M 350kg 487L-G 500kg 2

A

B

W

HINGE CAPACITY ASSUMPTIONS - The weight of the gate (W) is equally distributed.- The gate has an equal width (A) and height (B).- The hinges are mounted on the top and bottom rail of the gate or as close to the top and bottom as possible.

HOW TO CALCULATE HINGE CAPACITY [Width gate (m)]

[Hinge capacity] = [Weight gate (kg)] × [Height gate (m)]

Examples- If you double the width (A) of the gate, the hinge capacity needs to be double the weight of the gate.- If you halve the height (B) of the gate, the hinge capacity needs to be double the weight of the gate.

* Suitable for automation

Effective July 2011

Downee®




Gate Fittings

* Suitable for automation

Adjusted Hinge with “U” Bolt & Plate*

Code Rating Ctn161-M20 150Kg 20161-M24 225kg 10

Adjustable Pintle Hinge*

Code Size and Rating Ctn15520 M20 -150kg 2015524 M24 - 225kg 10

Clamp Hinge with Greaser & Plate with adjustable nut*

Code Rating To suit Ctn186-M18 100kg 192-30 20186-M22 160kg 192-35 10186-M27 260kg 192-40 10


Holed Pivot Square Base

Code size Ctn192-30 35 X 35 20192-35 40 X 40 10192-40 50 X 50 10

Clamp Hinge Body for Threaded Bar*

Code Rating To suit Ctn185-M27 260kg 192-40 6

Adjustable Hinge - Post Flange Mount, Gate Weld On*

Code Rating Ctn163-M27 320kg 10

Square plate with Adjustable Nut

Code Ctn159-M20 10

Hinge with Long Bar - U Bolt Post 100sq*

Code Rating Ctn130M20 150Kg 20130M24 225kg 10

Big Hinge - 2 Open Wings - Pivot with Washer & Bearing*

Code Rating Ctn445-90 800kg 10

Turned Drop Hinge*

Code Rating Ctn497-100 100kg 10

• Includes brass pivot, washer & bearing

Bolt Down Stop - Zinc Plated

Code Ctn171 10

Swing Stop to Bolt

Code Ctn300508B 25

Swing Stop to Concrete

Code Ctn300508 25

Downee®


downee.com.au 17


Effective July 2011

Gate Fittings

Gate Hinge - Fixed Pin - Zinc Plated

Code CtnTGP100 30

Gate Hinge - Adjustable Pin - Zinc Plated

Code CtnTGP110 30

Gate Hinge Packs - Zinc Plated

Code CtnTGP230 20

Fixed Hinges - Top & Bottom

Code CtnTGP240 20

Fixed Top - Adjustable Bottom

• Includes fasteners: - Fasteners - CAC28 - BTS28 - TGP100 - TGP110 - CAP

Self Closing Gate Hinge Packs - Zinc Plated

Code CtnTGP250 20

Fixed Top Self Closing - Fixed Bottom

Code CtnTGP260 20

Adjustable Top - Fixed Self Closing Bottom

Code Tube CtnSGP 25x25x1.2 10

Single Gate Packs

Code CtnDGP 5

Double Gate Pack - Zinc Plated


Code CtnTGP120 30

Self Closing Gate Hinge - Fixed Pin - Zinc Plated

All Gate Hinge Packs include bushes for: 25x25 to fit 25x25x1.2 tube30x30 to fit 30x30x1.2 tube38x25 to fit 38x25x1.2 tube

• Includes: - TPG100 x 2 - TPG110 x 2 - BG13L x 1 - CAC28 x 1• Fasteners: - BTS28 x 2 - CAPS x 2

Code Tube CtnLBGA40 40x40 10prs

Hinge for 40x40 SHS - Pair

Effective July 2011

Downee®




Gate Fittings

Ball Bearing Security Hinge - Weld on - Heavy Duty

Code Rating CtnG121R 650kg 5 prG121L 650kg 5 pr

Ball Bearing Gate Hinge - Bolt-on - Loose Pin


Ball Bearing Hinge - Bolt-on/Weld-on - Zinc

Steel to Steel Double Ball Bearing Hinges - Weld on - Zinc Plated

Code Rating CtnG4DR 200kg 10prG4DL 200kg 10pr

Butt Hinges

Rising Hinges - Zinc Plated

Code Rating CtnG7R 80kg 1 prG7L 80kg pr

• Both Top & Bottom hinges provided

Code Rating CtnG1RGAL 200kg 12 prG1LGAL 200kg 12 pr

Zinc Plated

Galvanised



Zinc Plated

Galvanised

Code Size CtnHLP100X75 100x75 40 prHLP100X100 100x100 30 pr

Code Size CtnHFP100X75 100x75 20 prHFP100X100 100x100 30 pr

Loose Pin - Zinc Plated

Fixed Pin - Zinc Plaed

Code Size CtnHSS10075 100x75 20 prHSS100100 100x100 10 pr

Fixed Pin - Stainless Steel


Double Butt Ball Bearing Hinge - Bolt on

Code Rating Ctn G8R 200kg 15 prG8L 200kg 15 pr


Zinc Plated

Galvanised

Scotch T Hinges - Galvanised - Brass Pin

Code Size CtnH150G 150 mm prH200G 200 mm prH250G 250 mm prH300G 300 mm pr

Code CtnPH75 Zinc Plated 30 pr

PH75SS Stainless Steel 30 pr

Hinges - Zinc Plated

Code Size CtnNBZP8560 85x60 50 pr

Downee®


downee.com.au 19


Effective July 2011

Gate Fittings

Bolt-On ‘D’ Latches & Strikers - Flat

Code CtnCAC28 Latch 50BTS28 Striker 50BTS29 Striker 50

Two Way Catches - Zinc Plated

Code Suits CtnCAC5 20NB 20CAC6 25 / 32 NB 20

• Catch can be made ‘one way’ by moving the locking fixture to one end

‘D’ latch & Strikers - Round Post - Weld On - Zinc Plated

Code CtnCAC26 Latch 50CAC26WS Striker 50

Weld-On ‘D’ latch & Strikers - Square Post Weld On

Code Description CtnCAC27 Latch 50CAC27WS Striker 50

‘D’ Latch Handles - Zinc Plated

Code Length CtnTB28-170 170 50TB28-230 230 50

Striker Anti Rattle Sleeve - Black Vinyl

Code Suits CtnSARS All Strikers 50

Code CtnCAC28G Latch 50BTS28G Striker 50

Zinc Plated

Galvanised

Bolt-On “D” Latch - Stainless Steel

Code Description

GRAMLS Latch & StrikerRGRAMHAN Handle

• Handle is universal - can be used for right or left side

GATE LATCHES GATE LATCHES

Code CtnDLKPP 50

Pack Set - CAC28 + BTS28 + TB28-170

‘D’ Latch & Striker - Round Post - Bolt On - Zinc Plated

Code Description CtnCAC29 Latch 50BTS28R Striker 50

Drop Bolt + Side Plates - Locking

Code Bolt Length CtnB13L 300 20B15L 400 20B15LG 400 20B17L 500 20

Gate Pad Bolts

Code Bolt lengthG18DGAL 175

Zinc PlatedCode Bolt lengthG17G 100G18D 175

GPBL10 210

Galvanised

Effective July 2011

Downee®




Gate Fittings

Lock & Handle - To Suit Steel Privacy Gate

Secura-Gate Spring Loaded Gate Lock & Gravity latch

Code CtnP705L 20 ea

Coil Type Spring - Zinc Plated

Code DescriptionG305 360mm Long

• Tension Adjuster and Lock Pin

Hasp & Staple - Heavy Duty - Zinc Plated

Code SizeG58 183 x 48

CodeG62

• Includes locking handle, lotch/rear handle, guide, keeper and screw

• 2 keys supplied

Manta Dual Side Magnetic Latch

Code Gate Frame CtnManta 50-80 5 ea

Gravity Latch

Code Fence Post CtnDPG100 35-125 10 ea

GATE LATCHES GATE LATCHES



Gate Lock - Black

Code Gate Frame73-40BLACK 4073-50BLACK 50

Gate Lock - Mill

Code Gate Frame73-40MILL 4073-50MILL 50

Aluminium Striker for Gate Lock 73

Code73-AS

Broadhurst Lock Kits

Code Description CtnBHL Broadhurst lock eaBHLDBL* Double lock box kit eaBHLLB lock box ea

*CONTENTS DOUBLE LOCK BOX KIT• 2 x Lock Boxes• 1 x Slide Bar• 1 x Slide Bar Catch For Single Gate• 1 x Slide Bar Catch for Double Gates• 1 x Lock Box Plate

Downee®


downee.com.au 21


Effective July 2011

Automation

24V - 400kg - 5m Sliding Gate Kit - Compatible with MH-SUN

Code DescriptionMH-SL1S Full KitMH-SL1S/02 Start Kit

24V -Sliding Gate SPLIT PACK Kit - With separate power supply

Code DescriptionMH-SL1S-SP Split Pack of MH-SL1SMH-SL1S/02SP Split Pack of MH-SL1S/02MH-SL10SP Split Pack of MH-SL10MH-SL10/02SP Split Pack of MH-SL10/02

FEATURES• Self Programming• 2 Speed• Timed and Adjustable auto closing function• Partial Opening• Easy connection with ECS Bus System

FEATURES• Low voltage connection to the motor, no need to have

power point at the gate• Self Programming• 2 Speed• Timed and Adjustable auto closing function• Partial Opening• Easy connection with ECS Bus System

FULL KIT INCLUDES GATE MOTOR AND CONTROL UNIT plus the following:

• Brackets & fixings• 2 Transmitters• 1 Pair of ECS BUS photocells• 1 Key Selector• 1 Flashing light with built in antenna

START KIT INCLUDES GATE MOTOR AND CONTROL UNIT plus the following:

• Brackets & fixings• 1 Transmitter

24V - 500kg Sliding Gate Kit

Code DescriptionMH-SL10 Full KitMH-SL10/02 Start Kit

FEATURES• Self Programming• 2 Speed• Timed and Adjustable auto closing function• Partial Opening• Easy connection with ECS Bus System

240V - 1500kg Sliding Gate Motor - low duty cycle

Code DescriptionMH-SL1500 Motor Only

FEATURES• Up to 1500kg• Electronic Clutch• Diecast Aluminium Body• Master/Slave functioning to operate 2 MH-SL1500

simultaneously• Can be equipped with MH-R2 receiver to be remotely

operated

240V - 2000kg Sliding GateMotor - 100% Duty Cycle

Code DescriptionMH-SL7500 Motor Only

FEATURES• Built in encoder system, no limit switch required• 100% duty cycle three phase 0.75KW motor• Variable speed inverter with 4 different speeds• Track or Cantillever gates up to 2 tonnes• Galvanised sheet powder coat cabinet• Can be equipped with MH-R2 receiver to be remotely

operated

SLIDING GATE KITS SLIDING GATE KITS

SOLAR OPTION - EASY PLUG’N PLAY

Code DescriptionMH-SUN Solar panel and batteries

COMPATIBLE WITH:• MH-SL1S, MH-SL1S/02• MH-WG2S, MH-WG2S/02 • Soon compatible with the entire range of products

FEATURES• Easy connections - cables included• Developed to suit Australian climate

SPECIAL ALL IN ONE KIT

CodeMH-SLGATEPACKMH-SLGATEPACKSPMH-SLGATEPACKHD

INCLUDES• 1 x MH-SL1S/02 or MH-SL1S/02SP (MH-SLGATEPACKSP) or

MH-SL10/02 (MH-SLGATEPACKHD)• 1 X extra MH-TX4• 4 X MH-4FPNR length of gear rack• 2 X SGT3 lenght of bolt down track• 2 X 300550 wheels• 2 X 23030 top rollers

CodeMH-AUTOPACK

INCLUDES• 1 x MH-SL1S/02• 1 X extra MH-TX4• 4 X MH-4FPNR length of gear rack

For a complete list of the safety devices recommended with our gate openers please refer to page 24 and 32

Downee technical support line: 1800 241 733

Effective July 2011

Downee®




Automation

24V - Worm Drive - 250kg/2m leaf - Compatible with MH-SUN

Code DescriptionMH-WG2S Double Leaf Full Kit

MH-WG2S/02 Double Leaf Start KitMH-WG1S Single Leaf Full KitMH-WG1S/02 Single Leaf Start Kit

FEATURES• Self programming• 2 speed• Timed and adjustable auto closing function• Partial/Single leaf opening• Easy connection with ECS bus system• Require gate stops in opening and closing

position

24V - Worm Drive - 400kg/4.5m leaf

Code DescriptionMH-WG20 Double Leaf Full Kit

MH-WG20/02 Double Leaf Start KitMH-WG10 Single Leaf Full KitMH-WG10/02 Single Leaf Start Kit


position• Electric lock is strongly recommended for single

gates above 2.5m

24V - Articulated arm wall mounted - 200kg/2m leaf

Code DescriptionMH-WS2 Double Leaf Full Kit

MH-WS2/02 Double Leaf Start KitMH-WS2/02SP Double Leaf Start Kit*MH-WS2SP Split packMH-WS1/02 Single Leaf Start Kit


position

24V - Semi underground - 200kg/1.8m leaf

Code DescriptionMH-WU2 Double Leaf Full Kit

MH-WU2/02 Double Leaf Start KitMH-WU1/02 Single Leaf Start Kit

FEATURES• Self programming• 2 speed• Timed and adjustable auto closing function• Partial/Single leaf opening • Easy connection with ECS bus system• Require gate stops in opening and closing

position• No side room needed - can open up to 180o

• No drainage required - IP 67• No foundation box required. To be bolted on

the ground or concreted in

24V - Articulated arm ground mounted - 200kg/1.8m leaf

Code DescriptionMH-WK2 Double Leaf Full Kit

MH-WK/02 Double Leaf Start Kit

FEATURES• Self programming• 2 speed• Timed and adjustable auto closing function• Partial/Single leaf opening • Easy connection with ECS bus system• Require gate stops in opening and closing

position

SWING GATE SWING GATE

SOLAR OPTION - EASY PLUG’N PLAY

Code DescriptionMH-SUN Solar panel and batteries

COMPATIBLE WITH:• MH-SL1S, MH-SL1S/02• MH-WG2S, MH-WG2S/02 • Soon compatible with the entire range of products

FEATURES• Easy connections - cables included• Developed to suit Australian climate

FULL KIT INCLUDES GATE MOTOR AND CONTROL UNIT plus the following:

• Brackets & fixings• 2 Transmitters• 1 Pair of ECS BUS photocells• 1 Key Selector• 1 Flashing light with built in antenna

START KIT INCLUDES GATE MOTOR AND CONTROL UNIT plus the following:

• Brackets & fixings• 1 Transmitter

• * Split Power

Downee®


downee.com.au 23


Effective July 2011

Boom Gate Arms and Accessories

Code Description

MH-WA1 White Aluminium Bar - 36x73x4250mm. To suit MH-BG4

MH-WA2 8m Pack Red Shockproof rubber strip with caps

MH-WA3 White Tubular Aluminium Bar - 70x4250mm. To suit MH-BG4. To be used with MH-WA4

MH-WA4 Connection for the MH-WA3 bar

MH-WA7 White Tubular Aluminium Bar - 70x6250mmTo suit MH-BG6. To be used with MH-WA8

MH-WA8 Connection for MH-WA7 bar

MH-WA21 White Aluminium Bar - 36x94x6250mm. To suit MH-BG6

MH-WA24 8m White Aluminium tubular telescopic bar. To suit MH-BG6

MH-WA11 Adjustable stand for bars

MH-WA12 Mobile stand for bars

MH-WA10MH Red adehsive reflective strips

BOOM GATES

Automation

FEATURES• Boom gate motors for barriers up to 8m in length• Galvanised steel, painted case• Incorporated control unit, can be removed for easy wiring• Easy to install, the bar can be assembled on either the right or left

hand side• Speed can be electronically adjusted

- 3.5 sec min opening time - MH-BG4- 5 sec min opening time - MH-BG6

• Anti-crush safety feature, in opening and closing• Optional back up battery• Can be equipped with MH-R2 receiver to be remotely operated

24V - Heavy Duty Boom Gate Opener

Code DescriptionMH-BG4 Motor, cabinet and

control to suit 4m barMH-BG6 Motor, cabinet and

control to suit 6m barMH-CARICA Battery charger for

MH-BG4 and MH-BG6MH-B12B 12V - 6Ah batteries

Effective July 2011

Downee®




Code Description

MH-TX4 4 Channel Remote Control

MH-DS1 3 Channel wireless keypad

MH-PR1* 24V Buffer Battery

MH-PLA10 12V Vertical Electric Lock - MH-EL1 required for correct functioning

MH-PLA11 12V Horizontal Electric Lock - MH-EL1 required for correct functioning

MH-EL1 Electric Lock Adapter

MH-PH0 Pair of Photocells - To suit MH-SL1500, MH-SL7500, MH-BG4 and MH-BG6

MH-PH1* Pair of ECS Bus Photcells

MH-PT50* Pair of ECS Bus Photocells on 485mm Post

MH-PT100* Double Pair ECS Bus Photocells on 945mm Post

MH-R2 Pre-Wired 12V/24V MH-TX4 and MH-DS1 universal receiver - 2 Channel

MH-RC2 240V Control Unit with Built in receiver & 2 timers

MH-TXWALL Wall Support For MH-TX4 Remote

MH-MGL Magnetic Lock

MH-LOOP Loop Detector with 11 Pin Socket & 6m Round Cable + 15m Lead

MH-MOM Proximity Reader - MH-MORX required for correct functioning

MH-MORX Decoder

MH-MOCARD Transponder Card

MH-DIGITALTIMER Timer to schedule automatic gate opening & closing

MH-FL1* Flash Light

MH-KS1* Key Switch Selector

MH-MOT Multicode Digital keypad - MH-MORX required for correct functioning

MH-PIU Expansion Card for MH-SL1500 to allow for trafic lights control, courtesy light, partial open input and electric lock output

MH-TXBATTERY Lithium CR2016 3V Battery - Suits MH-TX4 remotes

AutomationACCESSORIES *To suit all gate motors in catalogue except MH-SL1500 and MH-SL7500

Downee®


downee.com.au 25


Effective July 2011

Nylon Rack with Steel Core - Max 500kg

Code DescriptionMH-4FPNR 1m with 4 fixing points

Nylon Rack with Steel Core - Max 700kg

Code DescriptionMH-6FPNR 1m with 6 fixing points

1m Nylon Rack with Steel Core - Max 700kg

Code Description

MH-6FPNRUP 1m with 6 fixing points face UP

Steel rack to Weld on - Max 2200kg

Code DescriptionMH-STER Steel Rack 22 x 22 - 1mtre

Steel rack with Holes

Code DescriptionMH-STERHOL Steel rack with holes 30x8x1m

MH-STERHOL2 Steel rack with holes 30x8x2m

RACKS FOR SLIDING GATES

Automation

Bolt Through Spacer

Code Description263 Bolt through connector

Weld on Spacer for MH-STERHOL

Code Description264 Weld on Spacer

“L” Shape Bolt on Spacer for MH-STERHOL

Code Description266 “L” Shape Bolt

FIXINGS FOR STEEL RACKS WITH HOLES

Effective July 2011

Downee®




SPEARS - Aluminium

Decorative FittingsSPEARS - Aluminium

Code To Fit Size CtnSPG19 15.9ø 100x47 200SPG1 16ø 100x47 200SPG15 19ø 100x47 200

Clover - Female

Fleur de lis - Female

Code To Fit Size CtnSPJN19 15.9ø 100x68 125SPJN1 16ø 100x68 125SPJN15 19ø 100x68 125

Fleur de lis - Female

Code To Fit Size CtnSPJ2 12ø 100x68 125SPJ19 15.9ø 100x68 125SPJ1 16ø 100x68 125SPJ15 19ø 100x68 125

Fleur de lis - Male

Code To Fit Size Ctn

SPJ13 15.9øx1.216øx1.2 100x68 125

SPJ7 19øx1.2 100x68 125

SPJ17 19SQx1.220SQx1.6 100x68 125

Acorn - Female

Code To Fit Size CtnSPL19 15.9ø 55x32 125SPL1 16ø 55x32 125SPL15 19ø 55x32 125

Bishop - Female

Code To Fit Size CtnSPM59 16.0x1.2 170x98 40SPM83 19ø 170x98 40

Aston - Male


SPS13 15.9øx1.216øx1.2 89x45 150

SPS7 19øx1.2 89x45 150

SPS17 19SQx1.220SQx1.6 89x45 150

SPS40 25.4SQx1.2 89x45 150SPS43 25.4SQx1.6 89x45 150

Cardinal - Male

Code To Fit Size CtnSPQ7 19ø 110x30 100

Cardinal - Female

Code To Fit Size CtnSPQ19 15.9ø 110x30 100SPQ1 16ø 110x30 100SPQ15 19ø 110x30 100SPQ21 19SQ 110x30 100

Lilium - Female

Code To Fit Size CtnSPU9 16ø 150x65 60SPU33 19ø 150x65 60

Downee®


downee.com.au 27


Effective July 2011

Melrose - Female

Code To Fit Size CtnSPT31 15.9ø 150x38 80SPT9 16ø 150x38 80SPT33 19ø 150x38 80SPT8 20ø 150x38 80

Melrose 8 sided- Male

Code To Fit Size CtnSPT1 16ø 100x28 150SPT2 19ø 100x28 150


SPT13 15.9øx1.216øx1.2 110x28 220

SPT7 19øx1.2 110x28 220

SPT17 19SQx1.220SQx1.6 110x28 220

Melrose - Male

Camden - Female

Code To Fit Size CtnSPW9 16ø 150x62 60SPW33 19ø 150x62 60

SPEARS - Aluminium PICKET TOPS - Aluminium Windsor

Code Size To Fit CtnPITWIN 100x55 75x16x0.9 60

Kenilworth

Code Type Size To Fit CtnPITFLAT Low Profile 50x5 50x10x0.9 400PITKENISR Round 50xR25 50x10x0.9 350

Stonnington

Code Type Size To Fit CtnStonnington SmallPITSTONSP Plain 115x50 50x10x0.9 150PITSTONSF Fancy 115x50 50x10x0.9 150

Stonnington Large - For use with Aluminium tubePITSTONLP Plain 140x65 65x16x1.2 60PITSTONLF Fancy 140x65 65x16x1.2 60

Decorative Fittings

Camden -Female

Code To Fit Size CtnSPC19 15.9ø 100x42 200SPC1 16ø 100x42 200SPC15 19ø 100x42 200

Code To Fit Size CtnSPC31 15.9ø 150x62 60SPC9 16ø 150x62 60


SPT36 15.9øx1.216øx1.2 150x38 80

SPT38 19øx1.2 150x38 80SPT37 19SQx1.2 150x38 80SPT42 25.4SQx1.6 150x38 80SPT43 25.4SQx1.2 150x58 80

Effective July 2011

Downee®




Ball - Square Tube

POST CAPS - Aluminium POST CAPS - AluminiumClip Ons

Decorative Fittings

Code To Fit SizeSquare Tube - FemalePT50F 50SQ 95Hx50øSquare Tube - Male

PT50M 50SQx1.6 105Hx53ø50.8SQx2.0

PT65M 65SQx1.6-2.5 115Hx65øPT75M 75SQx2.3-4.0 125Hx75øPT100M 100SQx2.5-4.0 165Hx100ø

Ball - Round Pipe

Code To Fit SizeGalvanised Pipe - MalePT50NBM 50NB 115Hx65øPT90NBM 90NB 170Hx90øPT100NBM 100NB 194Hx105ø

Victorian Post Cap

Code To Fit SizePTVPC100 100SQ 230 HighPTVPC125 125SQ 290 HighPTVICSP*

Code Size CtnCO-SANTA-ANA 390x170mm 230 High

Code To Fit Size CtnFENDEC-16 16.0 45x45mm 125FENDEC-19 19.0 125

Clip Ons

Fence Panel Rings - Aluminium with Mill Finish

Code Size CtnFPRA78-8 78x8 100FPRA90-8 90x8 100

Fence Panel Rings - Steel with Gold Passivate

Code Size CtnFPRZ78-8 78x8 100FPRZ82-8 82x8 100FPRZ90-8 90x8 100FPRZ100-8 100x8 100

Code Size CtnFPRA78-10 78x10 100FPRA100-10 100x10 100

Code Size CtnFPRZ90-10 90x10 100

Code Description To FitPMA90M 172x172x75 90SQPMA100M 172x172x75 100SQ

Postmaster Verandah Post Supports

Code Description To Fit

PBA100SH Concealed fixing 50sqx1.6

PBA100FH 4 hole external fixing 50sqx1.6

Post Bases - Cast Aluminium

Post Supports & Post Bases

* Registered Design. Tested & Complies to AS1926.1

* Victorian Spear Kit: spear 150 high + Stud + Nut (cap not included). Cap with min. 44ø area

Decorators

Code Size CtnDPDVA 671x120 ea

Code Size CtnDFCZ* 120x120 100

Code Size CtnDFSA** 120x120 100

Die casting Aluminium

2 part interlocking

Downee®


downee.com.au 29


Effective July 2011

LATTICE - Aluminium LATTICE - Aluminium Panels - Double sided - Mill Finish

Decorative Fittings

Newels - Double Sided - Mill Finish

Corner & Frieze

Code Type SizeCORWESM Corner 400x400FRIWESM Frieze 800x75

Westminister

Code Type SizeCORDORM Corner 400x450

FRIDORM Frieze 800x135

Dorrington

Droppers - Small - to suit Westminister & Dorrington Frieze

Code SizeFDRSM 220x50

Suits Westminister & Dorrington

Code Size with lugs

NEWKIRM 850x180

KirbyKirby

Code Size with lugs

NEWHUNM 882x210

Huntley

Huntley

Code Size with lugs

NEWGLAM 810x215

Glamis

Glamis

Code Size with lugs

NEWHERM 910x200

Heritage

Heritage

Code Size with lugs

PANDURM 790x255

DurhamDurham

Code Size with lugs

PANCROM 695x375

CroxdenCroxden

Code Size with lugs

PANREAM 825x345

Reading

Reading

Code Size with lugs

PANHERM 940x500

Heritage

Heritage

Code Size with lugs

PANHENM 720x410

Hendon

Hendon

Code Size with lugs

PANBOXM 810x450

Boxley

Boxley

Code Size with lugs

PANCONM 920x842x16.5

Contemporary

Contemporary

Code Size with lugs

PANDERM 885x480

DerbyDerby

Code Size with lugs

NEWSUNM 814x195

SunflowerSunflower

Code SizeBRAJASM 440x440

Brackets Jasmine

Effective July 2011

Downee®




Industrial Sliding Door Components120 Series - Doors Up to 120kg

200 Series - Doors Up to 200kg

Code DescriptionDT120-61 Track - Length: 6100DT120HS2 Hanger, 2 Wheel, SteelDT120HN2 Hanger, 2 Wheel, NylonDT120HS4 Hanger, 4 Wheel, SteelDT120HN4 Hanger, 4 Wheel, NylonDT120-1 Side Fix BracketDT120-1A Offset Bracket - 25mmDT120-2 Overhead Bracket - Bolt OnDT120-5A Angle Bracket - DoubleDT120BS Bolt, Nut & Washer SetDT120-200TP Top Plate AssemblyDT120-200TS Track Stop with Buffer

Code DescriptionDT200-61 Track - Length: 6100DT200HS2 Hanger, 2 Wheel, SteelDT200HN2 Hanger, 2 Wheel, NylonDT200HS4 Hanger, 4 Wheel, SteelDT200HN4 Hanger, 4 Wheel, NylonDT200-1 Side Fix BracketDT200-1B Offset Bracket - 25mmDT200-2 Overhead Bracket - StdDT200-6B Double Overhead BracketDT200BS Bolt, Nut & Washer SetDT120-200TP Top Plate AssemblyDT120-200TS Track Stop with Buffer

450 Series - Doors Up to 450kg - Bracket Spacing 600mm

Code DescriptionDT450-61 Track - Length: 6100DT450HS2 Hanger, 2 Wheel, SteelDT450HN2 Hanger, 2 Wheel, NylonDT450HS4 Hanger, 4 Wheel, SteelDT450HN4 Hanger, 4 Wheel, NylonDT450-650/SAB Single Angle BracketDT450-650/5A Double Angle BracketDT450-650/1 Side Fix BracketDT450-650/2 Overhead Bracket - Bolt OnDT450-650BS Bolt, Nut & Washer SetDT450-650TS Track Stop with Buffer

650 Series - Doors Up to 650kg - FIRE DOOR CERTIFIED

Code DescriptionDT650-60 Track- Length: 6000 x 3DT450HS4 Hanger, 4 Wheel SteelDT650/1S Side Fix BracketDT650/2S Overhead Bracket Bolt-on

BRACKET SPACING GUIDE

DOOR WEIGHT120 Series 120 kg 100 kg 80 kg 70 kg 60 kg 50 kg <50 kg

200 Series 200 kg 160 kg 130 kg 100 kg 85 kg 80 kg <80 kg



Bracket Spacing 600mm 700mm 800mm 900mm 1000mm 1100mm 1200mm

Parrot Beak Lock Kit

Code Frame SizePBL40KIT 40 mmPBL50KIT 50 mm

Guide System

Code Guide DT94B Brass channel 3 mDT106RB/94 guide roller for DT94B

Downee®


downee.com.au 31


Effective July 2011

120 SeriesDoors up to 120kg




Size: 34x30Gauge: 1.0Length: 6100




Steel Wheel:DT120HS2Nylon Wheel:DT120HN2






Steel Wheel:DT450HS4

Overhead Weld on Bolt on: DT120-2

Overhead Weld on Bolt on: DT200-2

Overhead Weld on Bolt on: DT450-650/2

Overhead Weld on Bolt on: DT650/2S

Side Fix Bracket: DT120-1

Side Fix Bracket: DT200-1

Side Fix Bracket: DT450-650/1

Offset Bracket: DT120-1A

Offset Bracket: DT200-1A

Angle Bracket-Single: DT450-650/SAB

Overhead Double Bracket: DT120-5A

Overhead Double Bracket: DT200-6B

Bolt, Nut & Washer Set: DT120BS

M8X20 C/SinkBolt, Nut & Washer Set: DT200BS

5/16”x1 1/2 “ CupBolt, Nut & Washer Set:DT450-650BS

1/2”x1 1/2 “ Cup 1/2”x1 1/2 “ Cup

Trackstop with Buffer: DT120-200TS



Bolt, Nut & Washer Set:DT450-650BS

Side Fix Bracket: DT650/1S

Industrial Sliding Door Components

Angle Bracket-Double: DT450-650/5A

DT450-650JOINER DT450-650JOINERDT120JOINER DT200JOINER

COMING SOON COMING SOON COMING SOON COMING SOON

Effective July 2011

Downee®




Industrial Shutter Door ComponentsCOMMERCIAL AND INDUSTRIAL DOORS

916Mhz wireless key switch

CodeMSWKS

Pair of photocells with wireless transmitter

CodeMSPHIRIT2208

Shutter Central Motor

Code Rating TubePS1.60SFAEC (240V) 180kg 60NBPS1.60SFAEC24 (24V)* 100Kg 60NB

Code Rating TubePS1.76AFAEC (240V) 180kg 76NB

Code Rating TubePS2.60EC (240V) 280kg 60NB

Code Rating TubePS2.76EC (240V) 280kg 76NB

Wireless Safety edge - For shutter doors and sliding gates

Code SizeEDGESHORT UP to 1mEDGELONG 1m to 2m EDGEVLONG 2m to 3m

Motorised Shaft for commercial and industrial doors up to 250Kg or 4.5m high

Calculated by Downee engineers & made to specification.

MADE TO MEASURE TO SUIT YOUR CLOSING DEVICE.Includes:- aluminum strip to fix on gate or door- rubber edge to slide on aluminum strip- electronic comopnents (wireless transmitter that sits on the gate/door and receiver to connect to control unit)

Shutter control unit

Code to suitMSCONTROL PS1 and PS2 240V motorsMSCONTROL24 PS1 24V motor

Features:• Automatic closing• Dead Man operation• Built in 916Mhz receiver• Charger for buffer battery (MSCONTROL24 only)• Can be fitted with 240V Plug

916 MHz - 12/24V receiver

CodeMSREC

Features:• Intensive usage• Suitable for backup battery• Built in obstacle detention

Features:• works with MSCONTROL, MSCONTROL24 and MSREC

916 MHz - 2 channels rolling code transmitter

CodeMSDTX

Features:• works with MSCONTROL, MSCONTROL24 and MSREC

Downee®


downee.com.au 33


Effective July 2011

Rural

Timber Post Gudgeon - Screw In - Galvanised

Code Gate CtnG1B 20NB 30G3B 25NB 20G4B 32NB 20

Timber Post - Bolt Thu - Galvanised

Code Gate Post CtnG7B 25NB 300 20G8B 25NB 400 20

Code Gate Post CtnKQ2 32NB 300 10KQ1 32NB 400 10

Code Gate Post CtnKQS2S 32NB 300 10KQS1S 32NB 400 10

Code Gate Post CtnS7B 25NB 300 20S8B 25NB 400 20

Timber Post Strap - Bolt Thru - Galvanised

Code Gate Post CtnS7C 25NB 300 20S8C 25NB 400 20

TIMBER POST FITTINGS TIMBER POST FITTINGS

Long Plate Gudgeons - with Plastic Bush - Galvanised

Code Pipe CtnG12 20 40G13 25 40

Code Pipe CtnG24 20 50G22 25 30G23 32 50

Heavy Duty Short Plate Bolt Gudgeon - 50mm Steel Pin - Galvanised

Code Pipe CtnG40 20 50G41 25 50G43 32 40

Light Duty Short Plate Gudgeon with Plastic Bush - Galvanised

Pipe Hinge Straps - Galvanised

Code Pipe/Width CtnS1 20/25 100S2 25/25 50S3 25/40 30S4 32/40 30

Code Suit CtnA1 S1 200A2 S2 100A3 S3 100A4 S4 100

Code Suits CtnBP1 S1 200BP2 S2 100BP3 S3 100BP4 S4 100

Angle Post Gudgeon and Strap - Galvanised

Code Gate CtnAPS25 25NB 40

Code Gate CtnAPG25 25NB 20

Timber Post Gudgeon- Zinc Plated

Code Pipe CtnTPG25 25 40

Effective July 2011

Downee®




Weld on Socket - 12mm

Code Type Pin CtnWOS12 Socket 12 100WOP12 Pin 12 100WOS16 Socket 16 50WOP16 Pin 16 50WOS20 Socket 20 30WOP20 Pin 20 30WOS20L Socket 20 30WOP20L Pin 20 30WOS27 Socket 27 10WOP27 Pin 27 10

Rural

Adjustable Gudgeons - Weld On

Code GateAWG100 25NB

WELD ON FITTINGS CATCHES AND LATCHES

Gudgeon - Weld On

Code Suit CtnRGWS25G 25NB 50

Double Gate Ring Catch

Code Suit CtnDGCL25 25NB 15DGCL32 32NB 10

Timber Post Gate Catch

Code Size CtnCAC1 ø12 40

CAC2 ø16 20

Steel Post Gate Catch

Code CtnCAC4 20

Bow Latch - Galvanised

Code Suit CtnKSGB 25 - 32NB 10

Strap Hinge - Hinge

Code Suit CtnRGWS25 25NB 50

Socket

Pin

Double Gate Hook Catch

Code Suit CtnKDGH25 25NB 10KDGH32 32NB 10

Code Suits CtnKDGBC25 25NB 5

Double Gate Catch

Code Suit CtnFDG25 25NB 20

Weld-On Ring Catch

Code

RWOKCAC4-2

Weld-on Hook Catch

Code

RWOLFGF1

Weld on Chain Plate - Suit 5mm & 6mm Chain

Code Ctn

SCP5MM 30

Code Suits CtnCAC22 25 - 32NB 5

Downee®


downee.com.au 35


Effective July 2011

RuralCATCHES AND LATCHES STOCKYARD COMPONENTSScrew In and Weld-On Eyes - Zinc Plated

Code CtnSE12 30

Code CtnSE12W 30

Field Gate Fastener with chain - Galvanised

Code SizeFGF1 350mm chainFGP2 500mm chain

Code CtnFGS 100

Screw In

Weld-On

Drive in Staple

Code CtnFGF1S 350mm chain 30FGF2S 500mm chain 50

Pack - includes hook, chain & 2 staples

Code Striker bolt CtnSCJ-14 14ø 20SCJ-20 20ø 5SCLNZ 25ø ea

Slam Catch - Striker Plate - Zinc Plated

Code Suits CtnSP2Z SCJ-14 200

Code Suits CtnSP8Z/20 SCJ-20 10

Cattle Yard Pin - 16x100mm

Code CtnCYPG 30

Cattle Yard Cleat

Code CtnRAB7550U 60

Cattle Yard Half Cleat

Code CtnRAB7550 60

Cattle Yard Cleat and Pin Set - Zinc Plated

Code CtnCYCPP 20

• Includes: - CPYG - RAB7550U - RAB7550

Slam Catch - Zinc Plated

Effective July 2011

Downee®




RuralFARM GATE PACKS FARM GATE PACKSGate Pack - 25NB Bolt Thru - Timber Post

Code Post Pipe CtnFGP753 300mm 25NB 5

Gate Pack - 25NB Bolt Thru - Timber Post

Code Post Pipe CtnFGP303 300mm 25NB 5FGP413 400mm 25NB 5

Gate Pack - 25NB Screw In - Timber Post

Code Pipe Ctn

FGP221 25NB 10

Gate Pack - 25NB - Timber Post

Code Post Pipe Ctn

FGP151 300mm 25NB 5

Gate Pack - 25NB - Timber Post

Code Pipe Ctn

FGP121 25NB 10

Gate Pack - 25NB Bolt Thru - Timber Post

Code Post Pipe CtnFGP351 300mm 25NBFGP431 400mm 25NB

Gate Pack - 25NB Bolt on

Code Pipe CtnFGP523 25NB 10

Gate Pack - 25NB Weld-On


Gate Pack - 25NB Adjustable Weld-On


Gate Pack - 25NB Angle Post


Downee®


downee.com.au 37


Effective July 2011

Angle Bracket - Galvanised

Code Size HolesFA100 106x65x52x3mm ø13FA150 145x50x50x3mm ø13FA200 195x65x65x3mm ø13

Building Hardware

Heavy Duty Joist Strap

Steel Post Inner Brackets - Galvanised

Code Size HolesFPS50 45x42x44.5x3mm ø10FPS65 60x60x65x3mm ø10FPS90 90x90x3mm ø10

Threaded Rod - Galvanised

Code Size BundleCRM103 ø10mmx3m 10

CRM123 ø12mmx3m 10

CRM163 ø16mmx3m 10

CRM203 ø20mmx3m 10

Stair Tread Bracket - Galvanised

Code Finish STAIRB BlackSTAIRG Galvabond

Hanger bracket

Code Description HB4590 45x90mmHB45140 45x140mmHB45180 45x180mmHB50120 50x120mmHB50180 50x180mm

Code Description HDJL 31mm x 170mm (left)

Unibracket

Code Size UN100 100mm

Triple Fix

Code Size TGR Pre Bent RightTGL Pre Bent Left

MISC. HARDWARE MISC. HARDWARE

Code Size HolesF0228 40x40x40x3mm ø6F0229 50x50x40x3mm ø6F0230 75x75x40x3mm ø6F0232 50x50x40x5mm ø6

Code Size HolesF0212 40x40x40x5mm ø10F0213 50x50x50x5mm ø10F0201 50x50x50x5mm ø12

Angle Brackets - Zinc Plated

Code Size HolesL100X75 100x75x19x4mm ø7

Pergola Angle

Code Size PBA 88x63x36x1.6mm

Code Description

HT Holistrap Tensioner

Punched Holistrap/Builders Strap

Code Description HS30/30 30mm x 30m x 0.8mmHS30/HD30 30mm x 30m x 1.0mmHS30/HD50 30mm x 50m x 1.0mm

Blade Stirrup - Galvanised - 3mm Steel - 250 shaft

Code Description BOPS/90 90mmGBPS/90 90mm

Half Stirrup - Galvanised - 3mm Steel - 250mm Shaft

Code ShaftPPS/125 128mmPPS/200 200mm

Full Stirrup - Galvanised - 3mm Steel - 320mm Shaft

Code Shaft Stirrup WidthFS65/90 65mm 90mmFS200/90 200mm 90mmFS250/90 250mm 90mmFS300/90 300mm 90mm

Half Stirrup - Galvanised - 3mm Steel - 250mm Shaft

Code Shaft Stirrup WidthHSPS/65 65mm 90mmHSPS/200 200mm 90mmHSPS/250 250mm 90mmHSPS/300 300mm 90mm

Pallet Feet - Square

Code Size Finish ctn PF130SG 132x132x43 Gal 20PF130SB 132x132x43 Black 20

Effective July 2011

Downee®




Hexagonal Head Type 17 Timber - Class 4 - 12 Guage

Code Length CtnT17HC41225 25 1000T17HC41250 50 1000

Bugle Batten Type 17 Timber - Galvanised - Class 3 - 14 Guage

Code Length CtnT17BBC314075 75 1000T17BBC314100 100 500

IRIUS Anti Tamper Metal Screw, Galvanised Class 4

Code Gauge Thread length CtnSD8/8 5.5mm 8mm 250SD14/12 5.5mm 12mm 250

Code DescriptionE420 Irius Drive Setting Tool

FASTENERS & PAINTS FASTENERS & PAINTSCup Head Bolts & Nuts - Galvanised

Code Size Ctn

M10x25-5 M10x25 50M10x40-5 M10x40 50M10x60-5 M10x60 50M10x70-5 M10x70 50M10x80-5 M10x80 50M10x90-5 M10x90 50

Bolt Anchors - Zinc Plated

Code Size Ctn

HS1050 M10x50 50HS1060 M10x60 50HS1075 M10x75 50HS1095 M10x95 50HS10120 M10x120 50HS1260 M12x60 50

Bolt Anchors - Galvanised

Code Size Ctn

HS1050G M10x50 50HS1095G M10x95 50HS12100G M12x100 50

Mushroom Head Spike - Zinc Plated

Code Size CtnMH656MM 6.5x38 100MH6519MM 6.5x50 100MH6532MM 6.5x63 100

Nail-In Anchor

Code Size CtnMPA6532 6.5x32 100MPA6550 6.5x50 100

Hexagonal Head Metal Screws - Galvanised - Class 3

Code Gauge-TPIxLength Ctn

TEKM101616 10-16x16 1000TEKM101616-C* 10-16x16 1000TEKM121420 12-14x20 500TEKM121420-C* 12-14x20 500TEKM141025 14-10x25 1000

• *Coloured screws available in standard colourbond range.

Irius Drive Setting Tool

Touch Up Paints

Code Size CtnTUP 150g 12

• Available in a full colourbond range

Specialty Paints

Code Description Ctn

CGS375 Cold Galvanised 375g 12

EEP300 Epoxy Etch Primer 300g 12

WCCSZ400 Zinc Gal Spray 2 in 1 400g 24

Dome Plugs - Plastic

Code Hole CtnDPB12 ø12mm 100DPB16 ø16mm 100DPB19 ø19mm 100DPB22 ø22mm 100DPB25 ø25mm 100

Fasteners & Paints

Downee®


downee.com.au 39


Effective July 2011

Easyshade - Details

EASYSHADE MOTORISED FOLDING ARM AWNINGS

Shading Systems

SQUARE BAR phosphate galvanized and powder-coated steel square bar 40x40x1.5 cm

TUBE 70 mm diameter galvanized steel

ARMS extruded aluminium epoxy-coated, internal spring assembly

EXTENSION PROFILE extruded aluminium, end caps included

FABRIC OPTIONS acrylic fabric - recommended for the harsh Australian climate. Colours available as per SwatchBook

DRIVE UNIT tubular motor (240V/50Hz) with built in control unit. Back-up manual crank handle included

CONTROL OPTIONS wireless stylish table-top unit or wall plate, 3 channels (open, stop, close)

OPTIONAL ACCESSORY

solar powered wireless wind-sun sensor that detects the weather conditions and automatically controls awning movement.

LOW MAINTENANCEfor regular care and maintenance, excessive dirt should be washed from the fabric using a soft brush, spray with warm water, (not exceeding 40º) and air-dry

WARRANTY 5 year warranty on all components (fabric, structure, motor)

Ceiling installation240 mm

220

mm

Wall installation

Wind-sun sensor

Easyshade - Installation Options

Code width projection

BONDI from 2.4 m to max 2.9 m max 1.9 m

WHITSUNDAY from 3 m to max 3.9 m max 2.9 m

KAKADU from 4 m to max 5 m max 3.25 m

• Above RRP inclusive of one remote. Please refer to the bellow image for sizes.

max

pro

jecti

on m

max width m

4 5

2.9

3.25

2.4

1.9

BONDIWHITSUNDAY KAKADU

2.4 3 3.5 4.5

2.9

Projection data presented here are valid with the standard installation angle of 15º.

Installation angle can vary between 15º and 80º to accommodate specific needs.

As awning projection will vary according to the angle, please contact Downee tech support (1800 241 733) for more information or for specific applications.

Available in: ͳ white ͳ neutral ͳ seawater ͳ aluminium ͳ graphite ͳ black

Available in: ͳ white ͳ neutral ͳ orange

Squared wall plate

Table shockproof holder

Easyshade - Wireless control optionsEasyshade - Features

Mounting options

Code

Roof Truss

240 mm

220

mm

ANGLE

PROJECTION

15˚

80˚

Effective July 2011

Downee®




Light Duty

Safety Gate

Code CtnDPH100 20

Medium Duty

Code Rating CtnDPH200 20

DPHGGK Glass kit, inc. back plate and fasteners for DPH200

DPHGKSGlass kit, inc back plates and fasteners for DPH200 and Side Pull

Code CtnDPH210 20

LATCHES HINGES

Plain

Code CtnDPH110 20

Self Closing

Code CtnDPH120 20

Self Closing, Adjustable Tension

Top Pull Latch - Lockable

Code CtnDPL100 10

Vertical Pull Latch - Lockable

Code CtnDPL500 10

Adjustable Tension, with allignment legs

DPL100 + DPH110

Top Pull Light Gate Kit

Code CtnDPK110 5 ea

Code CtnDPK120 5 ea

Adjustable Tension

DPL100 + DPH120

Top Pull Medium Gate KitDPL100 + DPH200Code CtnDPK200 5 ea

Code CtnDPK210 Handle 5 ea

DPL100 + DPH210

Code CtnDPH250 10

HandleSafety Cap for Medium Duty Hinge

Code CtnDPH230 5

Code CtnDPH240 5

Adjustable Tension, Adjustable Round Post Legs

Adjustable Tension, Adjustable Wide Leaf

Adjustable Tension, Wide LeafCode CtnDPH220 5

Code CtnDPH300 50

Side Pull

Code CtnDPS100 ea

Downee®


downee.com.au 41


Effective July 2011

Notes:

PRICE LIST - Sable Engineeringsable.net.au/.../2013/05/Downee-Catalogue-July2011.pdf · PRICE LIST...

Documents

Transcript of PRICE LIST - Sable Engineeringsable.net.au/.../2013/05/Downee-Catalogue-July2011.pdf · PRICE LIST...