PRICE LIST No.KAL/001 - Kalisma Corpkalismacorp.com/images/kalisma price list.pdfPRICE LIST...
Transcript of PRICE LIST No.KAL/001 - Kalisma Corpkalismacorp.com/images/kalisma price list.pdfPRICE LIST...
PRICE LIST No.KAL/001stEffective from December1 , 2013
Factory
Kalisma Steel Pvt Ltd
Survey No 45/2, Survey no 45/3, Survey no 47,
Village Gore, Wada, Dist Thane,
Maharashtra, India
Phone : +91 2526 234 500
Fax : +91 2526 234 510
Corporate & Sales OfficeKalisma Steel Pvt Ltd
th406, 4 Floor, Sri Krishna, Complex,Opp Laxmi Industrial Estate, New Link Road, Andheri (W), Mumbai 400 053, India.Phone : +91 22 4248 1400Fax : +91 22 4248 1410Web : Email : fast.domsales @kalismacorp.comwww.kalismacorp.com
QUICK PRODUCT SELECTION GUIDE
4
PRODUCT HARDNESS
MA
XIM
UM
OPE
RA
TIN
GO
TEM
P C
TENSILE STRENGTH
(PROPERTY CLASS)PSI MM
2N/MM MIN
METRIC INCHDIAMETER LENGTH DIAMETER LENGTH
SIZE RANGE APPLICATION/FEATURESEQUIVALENT STANDARDS
IS ISO DIN BS ANSI JIS
SOCKET HEADCAP SCREWS
Hrc 39-44 O300 190000 1220(12.9)
M5TO
M42
8to 300
MM
3/16"to 1"
3/8"to
10"
2269 4762 912 41682470
B18.3.1M B1176 Suitable for all hightensile applications
Hrc 39-44 O300 160000 11220(12.9)
M5TO
M24
8to
130MM
- -6761 7991 41682470
B18.3.5M
SOCKET BUTTONHEADCAP SCREWS
Hrc 39-44 O300 - 11220(12.9)
M5TO
M10
6to 40MM
7380-
- - - 9427 4168 B18.3.4M
Controlled angle under the head ensures max. flushness & side wall contact. Non-slip hex
socket prevents marring of material
Low head streamline design. Use them in
materials too thin to counters, also for non-critical loading requiring
heat treated screws
SOCKETHEADSHOULDERSCREWS
HR c 39-44O300 M6
TO M24
- -3/16"to 1"
1/2"to 5"
7379 9841 41682470
B1175
SHEAR
96000 73010
TO 120MM
HEX WRENCHES Hrc 47min - 1/16"TO
3/4"A/F
-- 3082 B4648HardnessHrc 47
min
1.5to 32MMA/F
2936 911 41682470
B18.3.2M
HEX HEADSCREWS/BOLTS
Hrc (8.8)
22-34(10.9)32-39
1/4"TO1"
10TO300MM
1364800/300(8.8)1040(10.9)
M5TO
M42
40144017
931933
10831764
B18.2.1O300
O300
120000(5)
150000(8)
1/2"TO8"
B1180
HEX NUTS -(8)840(10)1040
M10TO
M42
4032 934970
10831768
B18.2.4.1MB18.2.2
-
-Hrc (8)
19-36(10)
26-36
PROOF STRESS
1364 B1181
HIGH STRENGTHSTRUCTURALBOLTS, NUTS,WASHERS
-BOLTS8.8/10/9
NUTS8/10
M16TO
M30
741247757415
691469156916970
4395 B18.2.4.1MB18.2.2
- 375766236649
B118140TO300MM
Replace costly special parts -shafts, pivot, pins,
guides, linkages and trunion mountings.
Also standard for tool and die industries.
Tough, ductile, for high torquing corners won'tround accurate fit in all type of socket screws
Suitable for wide range of industrial applications in the
automotive plant and machinery, structural
and electrical industries
Heavy Hex series structural bolts, nuts and washers for use in both friction grip
and bearing type structural joints.
SPECIAL PRODUCTS
BOLTS800/840
(8.8)1040(10.9)
M5TO
M42
8TO300MM
3/16"TO1"
3/8"TO10"
As per customer specifications As per customer specifications
SOCKET SET SCREWS(KNURLEDCUP POINT)
Hrc 45-53O250 M5
TO M20
5to 80MM
- B18.3.6M3/16"to
3/4"
3/16"to 3"
- - - B1177 Fasten collars, sleeves,gears, knobs on shafts.Locate machine parts
1/2"TO1"
stEffective from December 1 , 2013
HSS BOLT(8S) 22-34
(10S) 32-39HSS NUT
(CLASS8) Hrb89 - Hrc 36(CLASS10) Hrb26 - Hrc 36
Suitable for wide range of industrial applications in the
automotive plant and machinery, structural
and electrical industries
THREAD SIZE COMPARISION
5
METRIC PRODUCTS UNIFIED INCH PRODUCTS B.S. INCH PRODUCTS
THREAD PITCH & T.P.I.Major Dia
FINECOARSESIZE
PITCH(mm)
T.P.I. PITCH(mm)
T.P.I. mm Inch
M3 0.50 51 3.00 0.118
M4 0.70 36 4.00 0.157
M5 0.80 32 5.00 0.197
M6 1.0 25 6.00 0.236
M8 1.25 20 8.00 0.3151.00 25
M10 1.50 17 10.00 0.3941.25 20
M12 1.75 14.5 12.00 0.4721.25 20
M(14) 2.00 12.5 14.00 0.5511.50 17
M(16) 2.00 12.5 16.00 0.6301.50 17
M(18) 2.50 10 18.00 0.7091.50 17
M 20 2.50 10 20.00 0.7871.50 17
M(22) 2.50 10 22.00 0.8661.50 17
M24 3.00 8.5 24.00 0.9452.00 13
M(27) 3.00 8.50 27.00 1.0632.00 13
M30 3.50 7.25 30.00 1.1812.00 13
M(33) 3.50 7.25 33.00 1.2992.00 13
M36 4.00 6.40 36.00 1.4173.00 8.5
M(39) 4.00 6.40 39.00 1.5353.00 8.5
M42 4.50 5.60 42.00 1.6533.00 8.5
SIZE
Major Dia
T.P.I.
InchUNC UNF
#5 40 44 0.125
#6 32 40 0.138
#8 32 36 0.164
#10 24 30 0.190
1/4 20 28 0.250
5/16 18 24 0.313
3/8 16 24 0.375
1/2 13 20 0.500
5/8 11 18 0.625
3/4 10 16 0.750
7/8 9 14 0.875
1 8 12 1.000
1-1/8 7 12 1.125
1-1/4 7 12 1.250
1-1/2 6 12 1.500
SIZE
T.P.I. Major Dia
Major Dia
T.P.I.
Inch InchBSW BSF BA
1/8 40 0.125
5BA 43.1 0.126
4BA 38.5 0.142
3BA
34.8 0.16124 32 0.1873/16
2BA 31.3 0.185
1BA 28.2 0.209
1/4
25.4
0.23620 26 0.250
0BA
5/16 18 22 0.313
3/8 16 20 0.375
7/16 14 18 0.438
1/2 12 16 0.500
5/8 11 14 0.625
3/4 10 12 0.750
7/8 9 11 0.875
1 8 10 1.000
1-1/8 7 9 1.125
1-1/4 7 9 1.250
1-1/4 6 8 1.500
stEffective from December 1 , 2013
SOCKET COUNTERSUNK HEAD SCREWS
COLD FORGED HIGH TENSILEPRECISION SOCKET HEADCAP SCREWSGrade 12.9
M 5 M 6 M 8 M 10 M 12 (M14) M 16 (M18)
6
8 551 717
10 321 475 921
12 321 475 695 1106
16 352 452 610 1029
20 378 475 605 1072 2606 5679
25 403 532 673 1024 2283 5934 5679
30 464 602 742 1129 2168 5934 5679 15937
35 508 659 806 1219 2207 4989 4772 16136
40 555 717 875 1488 2227 5106 4644 14130
45 604 776 1021 1608 2499 5199 4978 14233
50 608 822 1076 1712 2318 5316 4827 14343
55 1042 920 1187 1848 2702 5382 5409 14432
60 1337 1702 1277 1999 2860 5703 5186 14549
65 1389 2160 3003 5789 5806 14666
70 1485 2328 3163 6241 6267 15663
75 1575 2480 3307 6609 6626 16687
80 2272 3430 3969 6917 6937 17010
90 2637 3921 4487 7075 7732 17354
100 3128 4593 4958 8782 8809 18206
110 3909 5440 6106 9542 9566 20145
120 4565 5502 7020 10310 10344 22065
130 5540 7491 8306 11650 11791 24567
140 5950 8359 9261 12437 12627 26534
150 6426 9297 10238 13291 13456 28506
160 6855 11621 16880 14176 26794 30407
170 12814 18558 15062 29840 36009
180 13074 18558 15948 29840 41612
200 20091 32975
220 21625 38063
230 27840 43152
240 32466 44720
260 37101 56456
280 39956 68186
BOX QUANTITY
M 20 (M 22) M 24
13518
13518
13696
11991
12074 15536
11562 16667 14882
12246 18750 16748
11718 19273 17215
12451 21465 18303
13297 21864 19527
14163 23178 20688
13717 24361 21760
14727 25557 22826
15442 26946 24072
17093 29311 26169
18743 31676 28293
20372 41660 30412
22009 48673 32522
24774 64892 34646
31752 76485 56086
36262
36262 81841 60183
37823 87596 64425
39397 96246 68949
50571
61744 103891 73480
75742 111530 75777
89728 119169 79613
SOCKET HEAD CAP SCREW METRIC
LENGTH
Recommended Retail Prices in Rupees per 100 PiecesExclusive of Excise Duty, Edu. Cess & other levies
6
Wrench
4mm
Wrench
5mm
Wrench
6mm
Wrench
8mm
Wrench
10mm
Wrench
12mm
Wrench
14mm
Wrench
14mm
Wrench
17mm
Wrench
17mm
Wrench
19mm
200 100 50 10 5
1. Specifications: Generally conforming to ISO : 2269, DIN : 912 ISO-4762,
2. Threads : ISO Metric (Coarse Series)5g6g as per, IS 4218, ISO : 261, ISO : 965
3. Material : High Grade Alloy Steel
4. Mechanical Properties : Property Class 12.9 grade as per IS: 1367, ISO 898 Part 1
5. NOTE : Sizes in brackets are non-preferred standard, Shaded sizes are fully
threaded. Non shaded size if required in full thread will cost 25% extra with
delivery period of 4 weeks.
6. For sizes beyond those listed, prices on application.
stEffective from December 1 , 2013
SOCKET HEAD CAP SCREWSGrade 12.9
LENGTH (M27) M30 (M33) M36 M42
60 31321
65 31105
70 34118 33496
75 35850 35893 53912
80 37211 37247 55961 65394
90 40944 39129 60739 71397 103678
100 43674 43723 63469 73412 110493
110 46405 46453 66887 77399 116666
120 49134 49183 73013 80741 123425
130 52544 52597 76437 83416 129599
140 54593 54649 81216 92093 136420
150 58009 58072 85314 95414 143172
160 91447 87389 112953 128402 194795
180 101003 96514 125953 143468 212513
200 109880 104992 136490 155480 230231
220 136970 130376 169149 192237 280988
240 151773 140209 182219 197525 301072
260 165319 149994 190621 211544 321129
280 176444 159825 201114 225605 341205
300 186151 169657 216818 239672 361276
BOX QUANTITY
SOCKET HEAD CAP SCREW METRIC
7
Recommended Retail Prices in Rupees per 100 PiecesExclusive of Excise Duty, Edu. Cess & other levies
Wrench
19mm
Wrench
22mm
Wrench
24mm
Wrench
27mm
Wrench
32mm
1. Specifications: Generally conforming to ISO : 2269, DIN : 912 ISO-4762,
2. Threads : ISO Metric (Coarse Series) 5g6g as per, IS 4218, ISO : 261, ISO : 965
3. Material : High Grade Alloy Steel
4. Mechanical Properties : Property Class 12.9 grade as per IS: 1367, ISO 898 Part 1
5. NOTE : Sizes in brackets are non-preferred standard, Shaded sizes are fully
threaded. Non shaded size if required in full thread will cost 25% extra with
delivery period of 4 weeks.
6. For sizes beyond those listed, prices on application.
stEffective from December 1 , 2013
5
SOCKET HEAD CAP SCREWS
INCH SOCKET HEAD CAP SCREWS
8
LENGTH 3/16” 1/4” 5/16” 3/8” 7/16” 1/2” 5/8” 3/4” 7/8” 1”
3/8 405 475
1/2 405 475 656 993
5/8 377 452 575 933
3/4 405 475 600 851 2606
7/8 504 625 944 2606
1 454 532 669 944 2225 2276 4919 12277
1.1/4 501 602 767 1035 2225 2385 4276 12277
1.1/2 573 671 858 1153 2269 2427 4425 10827 17438 15902
1.3/4 686 822 1014 1376 2426 2594 4707 11075 18127 16527
2 686 822 1014 1431 2426 2712 4931 11075 18127 17314
2.1/4 772 1666 1218 1650 2788 3125 5357 11314 19527 18663
2.1/2 858 1714 1218 1725 2921 3260 5357 11314 19527 18663
2.3/4 1951 1486 1984 3145 3540 5881 12876 21959 21021
3 1951 1486 1984 3295 3848 5881 12876 22002 21021
3.1/4 2338 2481 2906 4263 4602 6572 13377 24266 23180
3.1/2 2576 2481 2976 4263 4602 6858 13377 24266 23180
4 2944 3493 4937 5323 8147 14027 25602 25604
4.1/2 4619 5150 7089 6538 8644 17052 30104 28681
5 5350 6282 7089 7831 9534 18527 32341 30908
5.1/2 7551 8082 8622 11839 20501 34615 33069
6 7776 8089 17705 12901 22502 36867 36906
6.1/2 18565 27403 29566 64006 59068
7 19293 27403 30253 64006 61193
7.1/2 20104 28453 30940 66319 63506
8 30222 31566 67757 65506
8.1/2 39547 36628 71507 71632
9 39629 36628 71507 73695
10 51855 40698 81884
BOX QUANTITY
Wrench5/32”
Wrench3/16”
Wrench7/32”
Wrench5/16”
Wrench Wrench3/8”
Wrench1/2”
Wrench9/16”
Wrench9/16”
Wrench5/8”
200 10 5
1. Specifications: Generally conforming to BS : 2470
2. Threads : BS Whitworth, medium class as per BS: 84
3. Material : High Grade Alloy Steel
4. Mechanical Properties : As per BS 2470
5. NOTE : Shaded sizes are fully threaded. Non shaded size if required in
full thread will cost 25% extra with delivery period of 4 weeks.
6. For sizes beyond those listed, prices on application.
50
stEffective from December 1 , 2013
Recommended Retail Prices in Rupees per 100 PiecesExclusive of Excise Duty, Edu. Cess & other levies
SOCKET SET SCREWS(GRUB SCREWS)
S
OCKET SET SCREWS METRIC
1. Specifications : As per as per IS6094/ISO 4029/DIN 916
2. Threads : ISO Metri 5g6g IS4218, ISO : 261, ISO : 965
3. Material : High Grade alloy steel.
4. Mechanical Properties : 45H as Per IS -367
9
LENGTH M5 M6 M8 M10 M12 M16 M20
3
4
5 187
6 191 191 366
8 191 207 230 420
10 207 234 234 326 625
12 238 261 291 369 539
16 291 343 344 493 644 1429
20 339 371 446 608 795 1438 4704
25 392 465 552 736 1091 1949 5249
30 546 632 645 1060 1261 2308 6068
35 848 942 887 1224 1712 2886 6918
40 1008 1065 1050 1358 1899 3346 7736
45 1165 1148 1555 2109 3706 8588
50 1371 1279 1854 2302 4447 9395
55 2210 2982 3975 5644 11110
60 2412 3325 4464 6208 11805
65 2791 3470 5568 7154 13304
70 5998 9106 14043
75 10209 15268
80 10890
BOX QUANTITY
Wrench
2.5mm
Wrench
3mm
Wrench
4mm
Wrench
5mm
Wrench
6mm
Wrench Wrench
500 200
stEffective from December 1 , 2013
Recommended Retail Prices in Rupees per 100 PiecesExclusive of Excise Duty, Edu. Cess & other levies
100 50
3/8”
SOCKET COUNTER SUNKSCREWS
METRIC SOCKET COUNTER SUNK SCREWS
11
LENGTH M5 M6 M8 M10 M12 M16 M20 M24
6
8 738
10 510 564
12 529 564 736
16 569 617 736 1196
20 612 660 788 1116
25 719 773 904 1294 2179
30 869 889 1035 1483 2495 4689
35 1157 1011 1176 1705 2683 5054
40 1803 1157 1341 1955 2974 5414 10675
45 2029 2060 1507 2200 3275 6598 11452
50 2253 2576 2361 2483 3572 6138 12209 19735
55 5833 2818 2818 4421 7426 12958 21389
60 3074 3074 4765 7836 13703 23042
65 3331 5420 8246 14480 24696
70 3587 5837 8657 15257 26350
75 4612 6254 9831 16585 28004
80 4918 6672 10275 20615 29657
90 5534 11231 21428 32965
100 12477 24514 37485
110 27105 42005
120 29692 46526
130 31980 51046
BOX QUANTITY
Wrench
2mm
Wrench
4mm
Wrench
5mm
Wrench
6mm
Wrench
8mm
Wrench
10mm
Wrench
12mm
Wrench
14mm
200 10 5 25
1. Specifications : Generally Confirming to IS 6761 , DIN 7991
2. Threads : Threads will be confirmed to 5g, 6g of 4218 coarse series ..
3. Material : High Grade alloy steel.
4. Mechanical Properties : Hardness : HRC 38-44
stEffective from December 1 , 2013
Recommended Retail Prices in Rupees per 100 PiecesExclusive of Excise Duty, Edu. Cess & other levies
SOCKET SET SCREWS(GRUB SCREWS)
INCH
10
LENGTH 3/16” 1/4” 5/16” 3/8” 1/2” 5/8”
3/16 187
1/4 191 212
5/16 191 230 230
3/8 207 234 234 274
1/2 227 238 243 369 641
5/8 256 310 301 448 700 1653
3/4 331 471 394 538 884 1750
1 467 472 552 658 1091 2021
1.1/4 534 671 946 1523 2554
1.1/2 903 1323 1678 3635 4924
1.3/4 1143 1413 2026 4605 6461
2 1242 1673 2392 5037 5874
2.1/2 6342 8560
3 7776 10390
3/4”
3774
4544
5598
7786
9166
10784
13201
15903
BOX QUANTITY
Wrench Wrench Wrench Wrench Wrench Wrench Wrench
1. Specifications : As per as per BS 2470
2. Threads : BS Whitworth, Medium as per BS: 84
3. Material : High Grade alloy steel
4. Mechanical Properties : As Per BS : 2470
200 200 100 100 100 50 50
stEffective from December 1 , 2013
Recommended Retail Prices in Rupees per 100 PiecesExclusive of Excise Duty, Edu. Cess & other levies
SOCKET SET SCREWS
HEXAGON WRENCHES SETS
HEXAGON WRENCHES SETS
Length
1.5 1024
2 1024
2.5 1024
3 1129
4 1772
5 2162
6 3077
8 5795
10 9671
12 18194
14 26761
17 42325
19 58406
22 92056
24 123772
27 208371
32 366444
SOCKET BUTTON HEAD SCREWS
SOCKET BUTTON HEAD SCREWS METRIC
LENGTH M5 M6 M8 M10
5
6 938
8 929 1771
10 492 645 1079
12 539 657 915
15 633 750 938
16 633 750 938 1876
18 1384 750
20 750 809 961 1278
22 1618
25 891 844 1126 1466
30 1008 880 1290 1642
35 1571 1841
40 1759 2040
50
BOX QUANTITY
Wrench Wrench Wrench Wrench
3mm 4mm 5mm 6mm
200 100
1/16
5/64
3/32
1/8
5/32
3/16
7/32
1/4
5/16
3/8
1/2
9/16
5/8
3/4
1024
1129
1129
1129
1338
1731
2355
3411
5667
8383
19342
24748
36136
58435
Length Price/100pcs
1. Specifications : Generally confirming to ISO : 7380, Din 9427, IS 4218
2. Threads : ISO Metric, 5g6g as per IS 4218
3. Material : High Grade alloy steel.
4. Mechanical Properties : As per IS: 1367, ISO : 898 Part 1
1. Specifications : As per IS 3082, ISO 296,DIN 911
2. Material : High Grade Alloy steel.
3. Mechanical Properties : Hardness : HRc (47min)
BOX QUANTITY
100
100
100
100
100
100
50
50
25
25
10
10
10
5
price/ 100 pcs BOX QUANTITY
100
100
100
100
100
100
75
25
25
10
10
10
10
5
5
2
2
stEffective from December 1 , 2013
stEffective from December 1 , 2013
Recommended Retail Prices in Rupees per 100 PiecesExclusive of Excise Duty, Edu. Cess & other levies
Recommended Retail Prices in Rupees per 100 PiecesExclusive of Excise Duty, Edu. Cess & other levies
12 13
COLD FORGED HIGH TENSILEPRECISION HEXAGONALHEAD BOLTS/ SCREWSGrade 10.9
HEXAGONAL HEAD BOLTS/ SCREWS METRIC
Length M5 M6 M8 M10 M12 (M14) M16
8
10 263 331
12 267 350 510
16 431 362 515 864
18 431 369 464 864
20 347 362 462 816 1330 3029
22 370 375 526 898 3029
25 370 375 506 876 1455 2313 3029
30 398 394 570 945 1434 2493 3320
35 398 419 664 994 1524 2593 3320
40 422 444 703 1215 1724 2756 3286
45 461 471 762 1400 1912 2995 3484
50 554 504 828 1434 2045 3320 3743
55 583 554 913 1504 2208 3394 4189
60 636 606 1031 1651 2302 3546 4389
65 723 657 1064 1728 2407 3741 4532
70 1140 1817 2703 3968 4802
75 1185 1956 2799 4162 5150
80 1228 2251 2990 4406 5952
90 1587 2495 3198 4827 6359
100 1912 2848 3736 5555 6554
110 2694 3312 4082 6038 7321
120 2972 3605 4356 6705 8363
130 3253 4049 4605 7207 9766
140 4492 5425 9398 9969
150 4813 7300 10373 11346
160 5132 7653 11584 12323
180 5774 8319 12427 13860
200 10994 15003
220 15810 19392
240 16200 20870
260 16548 21292
280 18071 23507
300 19362 30216
(M18) M20 (M22) M24
6649
5940 6649
6191 6965
6383 6867 9860 12430
6819 7854 10618 11894
7033 7909 10966 12940
7270 8219 11743 13390
7941 8102 12151 14194
8405 9051 12569 14705
8421 9318 13080 16079
8946 9902 13932 17170
9912 10472 14860 18571
10449 11869 16176 19411
11531 12635 17290 20371
12057 13748 18219 21485
12584 14671 19131 22507
13475 14419 20030 23606
14512 17167 22848 28188
16099 20100 24813 30648
17394 21662 26809 33063
19133 30053 41179 47400
20874 31560 44607 49099
22614 33068 46321 50798
24354 36075 51485 55866
26093 39066 55163 68296
Wrench Wrench Wrench Wrench Wrench Wrench Wrench Wrench Wrench Wrench Wrench
8mm 10mm 13mm 16mm 18mm 21mm 24mm 27mm 30mm 34mm
BOX QUANTITY 200 100 50 25 10 10
1. Specifications : Generally confirming to IS : 1364, ISO : 4014, ISO 4017, DIN : 931/933
2. Threads : ISO Metric 6g as per IS 4218
3. Material Mechanical Properties : Property Class 10.9 as per IS: 1367
4. Note : Sizes in brackets are non preferred.
5. Order for property class 8.8 can be accepted subject to our confirmation on the basis of itemwise quantities.
6. Shaded sizes are fully threaded price for full threaded screws beyond shaded sizes will COST 15% extra.
7. FINE PITCHE threaded price will COST 15% extra.
stEffective from December 1 , 2013
Recommended Retail Prices in Rupees per 100 PiecesExclusive of Excise Duty, Edu. Cess & other levies
14
HEXAGON HEAD BOLTS/ SCREWS Grade 10.9
HEXAGONAL HEAD BOLTS/ SCREWS METRIC
(M27) M30 (M33) M36 M42
50 24917 33029
55 24917 33029
60 24917 33029
65 24917 33029
70 24917 33029
75 26796 33029 45338
80 28040 34372 47939 57352
90 30528 37311 50850 61719 90508
100 33029 40152 54455 64206 95709
110 35616 44166 58553 68573 100939
120 36519 45142 59952 69902 101716
130 37721 47175 63175 73563 106012
140 40110 50101 67090 77760 111912
150 42498 52914 70934 81929 117798
160 46936 59867 74240 90027 123692
180 51925 65931 81293 104400 134928
200 56560 71923 88430 113678 141033
220 77944 86777 106946 135678 180902
240 84048 92883 114831 145450 194329
260 89561 99001 123438 155210 207797
280 95059 105107 132002 164989 221239
300 99518 111199 140554 198059 234672
BOX QUANTITY
Wrench
41mm
Wrench
46mm
Wrench
50mm
Wrench
55mm
Wrench
65mm
5
1. Specifications : Generally confirming to IS : 1364, ISO : 4014, ISO 4017, DIN : 931/933
2. Threads : ISO Metric 6g as per IS 4218
3. Material Mechanical Properties : Property Class 10.9 as per IS : 1367
4. Note : Sizes in brackets are non preferred.
5. Order for property class 8.8 can be accepted subject to our confirmation
on the basis of itemwise quantities
stEffective from December 1 , 2013
Recommended Retail Prices in Rupees per 100 PiecesExclusive of Excise Duty, Edu. Cess & other levies
15
Length
HEXAGON HEAD BOLTS/SCREWSGrade 5 & 8
LENGTH 1/4” 5/16” 3/8” 1/2” 5/8” 3/4” 7/8” 1”
1/2 399 532
5/8 495 510 857
3/4 450 487 747 1609
7/8 406 532 902 1596
1 443 530 737 1695 2962
1.1/4 450 583 823 1878 3306
1.1/2 502 715 930 2003 3468 6087 13298
1.3/4 550 802 1086 2169 3700 6317 13298
2 604 848 1191 2361 3887 6731 15914 13978
2.1/4 939 1306 2607 4232 7392 15914 14520
2.1/2 1031 1433 2776 4631 7755 12832 15186
2.3/4 1114 1596 3005 5005 8460 12832 16191
3 1173 1691 3371 5394 8792 13443 17734
3.1/4 1251 1870 3615 5744 9178 14826 18420
3.1/2 1348 1922 3739 6085 9921 14826 19195
3.3/4 1664 2356 3935 6730 10649 15906 21129
4 1838 2533 4099 6908 11142 16664 21129
4.1/4 2816 4353 7149 11416 17666 23296
4.1/2 2981 4742 7415 11944 18508 23296
5 3312 5180 8347 12706 19914 25994
5.1/2 6324 9603 14268 20980 28095
6 7678 10066 14648 22268 29395
6.1/2 11744 15829 23500 31878
7 12648 15829 25940 34359
7.1/2 13551 17008 27282 36763
8 13798 18637 28485 38465
9 19484
10 21920
11 23298
12
BOX QUANTITY
HEXAGONAL HEAD BOLTS/ SCREWS INCH
Wrench
7/16”
Wrench
1/2”
Wrench
9/16”
Wrench
3/4”
Wrench
1.5/16”
Wrench
1.1/8”
Wrench
1.5/11”
Wrench
1.1/2”
200 10025 5
1. Specifications : Generally confirming to ANSI B 18.2.1
2. Threads : Unified Coarse 2A as per ANSI B1.1
3. Material Mechanical Properties : Grade 8 as per SAE J 429
4. Note : Shaded sizes are fully threaded.
5. Order for property class 5 can be accepted subject to our confirmation
on the basis of itemwise quantities. 6. Shaded sizes are fully threaded price
for full threaded screws beyond shaded sizes will COST 15% extra.
7. BSF/UNF/FINE PITCHE threaded price will COST 15% extra.
stEffective from December 1 , 2013
Recommended Retail Prices in Rupees per 100 PiecesExclusive of Excise Duty, Edu. Cess & other levies
16
HEX NUTS
HEX NUTS METRIC
HEX NUTS INCH
SIZE GRADE PRICE /100PCS
10*1.5 8 359
12.1.75 8 552
12*1.75 10 928
16*2 8 1100
16*2 10 1409
20*1.5 10 2697
20*2.5 10 2710
24*3 10 4659
30*3.5 10 10291
36*4 10 19238
39*4 10 24928
42*4.5 10 30619
SIZE GRADE PRICE /100pcs
1/2 8 678
5/8 8 1409
3/4 8 2485
7/8 8 3350
1 8 5000
1. Specifications : For Nuts with Metric Threads IS :1364, ISO : 4032, DIN : 970
For Nuts with UNC Threads : (ANSI B 18.2.2)
2. Threads : ISO Metric 6g as per IS : 4218, ISO : 261, ISO : 965
Threads Will be Confirm to 2 B of ANSI B 1.1 & BS 1580 for Unified threads ( COARSE/LINE)
3. Material Mechanical Properties
: Metric Nuts : Property Class ‘8' or ‘10' as tabulated as per IS : 1367, ISO : 898 Part II
: Inch Nuts (UNC) : Grade ‘5' & ‘8' as per SAE J 995
4. Note : Sizes in brackets are non preferred.
5. Note : 10% Extra for fine pitch for the rate not mention above
6. Note : 10% Extra for fine Nylock Nuts, Doom Nuts & Cap Nuts.
BOX QUANTITY
200
200
200
200
100
50
25
12
10
BOX QUANTITY
200
200
125
60
50
200
100
12
stEffective from December 1 , 2013
Recommended Retail Prices in Rupees per 100 PiecesExclusive of Excise Duty, Edu. Cess & other levies
17
10
COMPARISON OF DIFFERENTSTRENGTH GRADES
stEffective from December 1 , 2013
19
HIGH STRENGTH STRUCTURAL BOLT HEAD
HIGH STRENGTH STRUCTURAL BOLT HEAD METRIC
1. Specifications : For nuts with Metric Threads IS-1364,
ISO 4032 DIN 970 for nuts with UNC threads (ANSI B 18.2.2)
2. Threads : ISO Metric, 6g as per IS- 4218, ISO 261, ISO 965
3. Material Mechanical Properties : Metric Nuts property class
'8'or '10' as tabulated as per IS: 1367, ISO 898 Part II
4. For Zinc passivated finish the prices will be on enquiry.
Length M16 M20 M22 M24 M27 M30
40 4118 7611
45 4485 8190
50 4718 8565 11615
55 4873 8943 11914 15125
60 5197 9558 12434 15660 31887
65 5481 9977 13570 16961 33378
70 5791 10335 14216 17223 33153
75 6199 10728 14660 18734 35430 42794
80 6807 11033 15176 19095 37022 44309
90 7139 11725 16685 21100 39334 45533
100 7744 12405 17064 22664 42230 48828
110 8363 12882 18420 23219 43967 53153
120 8822 13974 19639 24129 45191 54184
130 10590 15027 20735 25176 46485 56787
140 10758 15492 21683 26257 49279 60152
150 12755 16328 22737 27443 52044 63398
160 13805 19447 25801 31184 57323 71590
170 14660 20271 26882 33800 63259 78699
180 15515 21097 27961 35327 63119 78573
200 17500 23660 30058 37953 68499 85479
BOX QUANTITY
1. Specifications : Bolts : IS :3757, Nuts : 6623, Wahers : IS :6649, ISO 7412, 4775 & 7415.2. Threads : Bolts : ISO Metric 6g as per IS 4218 : Nuts : ISO Metric 6H as per IS 4218 3. Material Mechanical Properties : Bolts : Property class 8.8 as per IS 1367 : Nuts : Property Class 8 as per IS 1367 : Washers : Hardness Hrc 38-45 as per 66494. Note : The above prices are for bolts property class 8 and nits of property class 8 Prices of Bolts and Nuts of property class 10.9 and 10 are higher and can be furnished on request.5. For HSS Bolts length above 200 price on request.THESE ITEMS ARE PROJECT ORIENTED PRODUCTS AND DEPENDING UPON STOCK SITUATIONMINIMUM ORDER QUANTITY MAY BE APPLICABLE
stEffective from December 1 , 2013
Recommended Retail Prices in Rupees per 100 PiecesExclusive of Excise Duty, Edu. Cess & other levies
18
Bulk packaging as per customer requirement
STRESS AREA, PROOF LOAD AND TIGHTENING TORQUE
Normal Dia Pitch Stress Area mm2
M6 1 20.1 1.16 1.59 1.91 1.2
M8 1.25 36.6 2.13 2.9 3.48 3
1 39.2 2.28 3.1 3.72 3.2
M10 1.5 58 3.38 4.59 5.51 5.9
1.25 61.2 3.55 4.86 5.82 6.3
1 64.5 3.74 5.12 6.13 6.6
M12 1.75 84.3 4.9 6.68 8.01 10.4
1.5 88.1 5.11 6.99 8.38 10.9
1.25 92.1 5.34 7.29 8.75 11.3
M14 2 115 6.67 9.1 10.9 16.5
1.5 125 7.25 9.9 11.9 17.9
M16 2 157 9.1 12.4 14.9 25.7
1.5 167 9.69 13.2 15.9 27.4
M18 2.5 192 11.5 15.2 18.2 35.4
1.5 210 13 17.1 20.5 38.7
M20 2.5 245 14.7 19.4 23.3 50.2
1.5 272 16.3 21.5 25.8 55.7
M22 2.5 303 18.2 24 28.8 68.3
1.5 333 20 26.4 31.6 75
M24 3 353 21.2 28 33.5 86.8
2 384 23 30.4 36.5 94.4
Normal Dia Pitch Stress Area mm2
BSW 20.6 1.11 1.34 1.61 1.2
BSF 23 1.24 1.49 1.79 1.3
BSW 34 1.84 2.21 2.65 2.4
BSF 36.6 1.98 2.38 2.85 2.6
BSW 50.3 2.71 3.27 3.92 4.2
BSF 54.1 29.2 3.52 4.22 4.5
BSW 69 3.72 4.48 5.38 6.7
BSF 74.7 4.03 4.86 5.83 7.3
BSW 89.4 4.83 5.81 6.97 10
BSF 98.1 5.3 6.37 7365 11
BSW 146.5 7.91 9.52 11.42 20.5
BSF 156.8 8.47 10.19 12.23 21.9
BSW 216.8 11.71 14.09 16.91 36.3
BSF 227.1 12.26 14.46 17.71 38.1
BSW 298.7 16.13 19.42 23.3 58.4
BSF 314.2 16.97 20.42 24.41 61.4
BSW 392.3 21.18 25.5 30.6 87.7
BSF 414.2 22.37 26.92 32.31 92.6
Normal Dia Pitch Stress Area mm2
UNC 20.9 1.36 1.69 1.92 1.4
UNF 23.7 1.54 1.92 2.18 1.6
UNC 34.3 2.23 2.78 3.16 2.9
UNF 37.9 2.46 3.07 3.48 3.2
UNC 50.7 3.3 4.11 4.67 5.2
UNF 57.2 3.72 4.63 5.26 5.8
UNC 69.5 4.52 5.63 6.4 8.3
UNF 11.3 5.02 6.26 7.11 9.2
UNC 92.8 6.03 7.52 8.54 12.6
UNF 104 6.76 8.42 9.57 14.2
UNC 147.7 9.6 11.97 11.59 25.1
UNF 166.5 10.82 13.48 15.31 28.3
UNC 218.1 14.17 17.66 20.06 44.5
UNF 241.9 15.73 19.6 22.26 49.4
UNC 301.3 19.58 24.4 27.72 71.8
UNF 331 21.47 26.81 30.45 78.9
UNC 394.8 25.66 31.98 36.33 107.5
UNF 430.3 27.97 34.86 39.59 117.2
1.7 2.1
4.2 5.1
4.5 5.4
8.4 10
8.9 10.6
9.3 11.2
14.6 17.5
15.3 18.3
15.9 19.1
23 27.8
25.2 30.2
36.2 43.4
38.5 46.2
49.8 59.7
54.4 65.3
70.6 84.7
78.3 94
96 115.2
105.5 126.6
122 146.4
132.7 159.3
1.4 1.7
1.5 1.9
2.8 3.5
3 3.8
5 6.3
5.4 6.8
8 10.1
8.6 10.9
11.8 14.9
13 16.3
24.2 3.05
25.9 32.7
42.9 54.2
45 56.8
69 87.1
72.6 91.6
103.6 130.7
109.4 138
1.8 2
2 2.2
3.6 4
4 4.4
6.5 7.1
7.3 8
10.3 11.4
11.5 12.6
15.7 17.3
17.6 19.4
31.3 34.5
35.3 38.9
55.5 61.1
61.6 67.8
89.5 98.6
98.3 108.3
134 147.6
146 160.9
Proof Load in 1000 kg Tightening Torque in kg-m
8.8 10.9 12.9 8.8 10.9 12.9
Proof Load in 1000 kg
Tightening Torque in kg-m
8.8 10.9 12.9
8.8 10.9 12.9
Proof Load in 1000 kg
8.8 10.9 12.9
Tightening Torque in kg-m
8.8 10.9 12.9
1/4
5/16
3/8
7/16
1/2
5/8
3/4
7/8
1
1/4
5/16
3/8
7/16
1/2
5/8
3/4
7/8
1
stEffective from December 1 , 2013
20
HYDROGEN EMBRITTLEMENT
High Strength Industrial Fasteners
including precision grade Socket
Screws and other products in this
brochures are used in a wide range
of applications and environments.
In many cases they have to be protected
from these environments to prevent
corrosion by electroplating the screw
with zinc or cadmium coatings.
Too often, fasteners(Socket Screws)
are plated by the user disregarding
adequate precautions and this results
in fastener failures either in storage,
on assembly tightening or after a short
period in service. These failures can be
catastrophic not only in terms of capital
cost of damaged machinery, but also in
human life. Interestingly, most of these
failures occur at stress levels below
the ultimate tensile strength of the
fastener.
Investigations have proved these
failures to be due to HYDROGEN
EMBRITTLEMENT. Hydrogen produced
during the electroplating process
diffuses into the steel and
embrittles the structure. Another
common source of Hydrogen
is found prior to electroplating
in cathodic cleaning and acid pickling.
These cleaning processes generate
hydrogen. The greater the
concentrations of hydrogen in the
steel, the more susceptible to
embrittlement the fastener becomes.
High Strength Socket Head Cap Screws
are particularly prone to hydrogen
embrittlement failure because of its
high strength (above 1240 N/mm2)
and greater the strength (or hardness)
of the fasteners, the greater the
susceptibility to hydrogen
embrittlement.
Because of this, it is imperative that
post-plating de-embrittlement baking
is carried out. The baking process
enables the hydrogen in the steel to
diffuse out of the metal and eliminate
the embrittlement tendency.
IMPROPER PLATING
CAN LEAD TO
HYDROGEN
EMBRITTLEMENT
AND DISASTROUS
FASTENER
FAILURES
BE SURE YOUR
PLATING PROCESS
COMPLIES WITH
RECOMMENDATIONS
stEffective from December 1 , 2013
21
23
GENERAL CONDITION FOR SALE
All enquiries, quotations, orders, or contracts are entitled to following terms and conditions unless otherwiseaccepted in writing by Kalisma Corp (Herein after called the COMPANY).
PRICESPrices will be charged as per the prevailing price list at the time of dispatch, unless otherwise specially agreed. Prices are F.O.R Destination/Wada basis as usually agreed. Excise duty, educational cess. Sales taxes & other government levies & duties to the purchasers account as per prevailing norm during the dispatches.
PACKAGINGPrices are inclusive of goods in packed cartoons.
PAYMENTPayments are as per mutually agreed terms & any delay in payment after due date shall attract penal interestas per banking norm.
DELIVERYAll offer for executing orders are from the stock, provided the same is available in ex-stock. For forward delivery, the dates are given without any assurance & no responsibility is guaranteed by the Company as the delivery failure may arise due to circumstances beyond the Company's control.
FORCE MAJEUREThe company shall not be responsible for failure or delay in delivering the goods or any part thereof (of any consequential damages) due to acts og GOD, enemies of Government of India, Wars, embrago, riots, civil or political disturbances, strikes or lockouts, stoppages of labour, shortages of raw material and/or labour shortage of motive-power, non availability of shipping spaces or import or export license, breakdown of machinery, restraints imposed on the company by the government, municipality or any other cause beyond the Company's control, such failure/delay shall not entitle the purchasers to cancel the contract nor is the Company liable to make good any damage arising from such failure to delivery or delay in delivery.
ACCEPTANCE OR RETURNSIn case of wrong dispatches the customers should intimate to the Company within 15 days of receipt of goods & prior confirmation should be obtained from the Company in writing before returning the wrong dispatches.
CONFIRMATIONThe Company shall not be responsible for any order which is not confirmed by company in writing.
GUARANTEEThe company shall undertake the free replacement of good against defects due to workmanship by the company after returning the defective products to the company's premises. But the Company shall not entertain the defective product for free replacement, arises due to improper use/processes at customers end. The Company also accepts no responsibilities for any contingent or resulting liabilities or losses arising through any defective goods supplied. Any claim for such replacement under this clause will arise only if the material is returned in good condition within three months from the date of supply. The Company's decision on the cause of any such defects is final & binding.
CANCELLATION OF ORDERSThe company reserved the rights to refuse the cancellation of orders once it has been accepted. Failure on the part of the purchaser to accept the delivery and remit the payment will be considered a breach of contracts & Company is entitled to cancel the contract & process legally for recovering the payment if any.Supplies should be made in Blackened/phosphating finish. Other special finishes are at extra cost.Maximum retail selling prices(Exclusive of Excise duty, Educational Cess & Sales taxes & other levies as applicable) shall not exceed the printed prices on the carton boxes. However the customer is free to sell the product less than printed prices.The Company will not stand guarantee for socket products above 10.9 upgrade used in plated condition which has been plated at customer’s end. Any dispute or claim arising out on or out, or in connection with quotation, contracts, for supplies by the company shall be referred to the sole Arbitrator appointed by the Managing Director of the Company and the decision made by such our Arbitrator shall be final & binding on both the parties.
stEffective from December 1 , 2013
22