Price List - iml-na.com · This price list is valid until the publication of a new price list,...

Price ListInnovative Wood Testing Systems for Trees and Timber Structures

All information contained in this price list has been prepared with the utmost care. However, errors cannot be excluded.

IML North America, LLC. assumes neither legal responsibility nor any liability for the consequences of such errors or mistakes. The information contained herein may be modified without notice.

No liability is accepted for printing or typographical errors. This price list is valid until the publication of a new price list, subject to price corrections due to any technical improvements. This price list supersedes all previously valid price lists.

Any kind of reproduction or processing by means of electronic systems, or distribution of the present or any part of it without prior written approval of IML North America, LLC. is strictly prohibited.

Product information in this price list is limited to a few fundamental properties and practical applications. Detailed information is available in our brochures or on our website: www.iml-na.com.

All prices quoted are exclusive of taxes, freight, packaging and insurance costs. Unless otherwise stated, all prices are in dollar per unit.

All prices are subject to change. We deliver in accordance with our general terms and conditions. Changes with regard to better function, performance, durability and technical improvements are reserved. Update and repair prices are not included in this price list. The following products are similar to those in the illustrations.

© 2015 IML North America, LLC. All rights reserved. Dated 01/2015.

3Innovative Wood Testing Systems for Trees and Timber Structures

FractometerMeasurement of the bending and compression strength

General Accessories

‚Jim-Gem‘ Increment borerCore extraction

IML Timber ModelsProf. Dr. Claus Mattheck

IML Micro HammerSound velocity measurement

IML Measuring Table Annual ring analysis

IML Technical LiteratureScientific literature on trees

General Delivery and Payment Terms

IML-RESI Systems chargersFor all IML-RESI Systems batteries

Table of Contents

IML Probe Rod/ Analysis Testing Pin 42

IML Penetrometer 43

Calipers 43

Hatchets 44

Stainless steel pattern 44

IML Micro Hammer 36

Optional Accessories & Spare Parts 36-38

IML Measuring Table 39

Our selection of books 46-49

General Delivery and Payment Terms 50

‚Jim-Gem‘ Increment borer 34

Accessories & Spare Parts 34-35

Timber Model Hazard Beam 45

Timber Model Height Measurement Tool 45

Chargers 31

Fractometer I + Fractometer II 32

Fractometer II Complete Set 33

Innovative Wood Testing Systems for Trees and Timber Structures

IML-RESI SystemsDrilling resistance instruments

IML-RESI MD300 4-5

IML-RESI PD-Series 6-15

IML-RESI F-Series 16-27

Consumables IML-RESI E-/ M-/ B-Series 28-30

IML Service and CalibrationAnnual service inspection

IML Service and Calibration 40

IML Tree LabelsAluminium Tree Labels

IML Tree Labels 41

4 Innovative Wood Testing Systems for Trees and Timber Structures

IML-RESI MD300Lightweight hand drill, fast and easy to use

5

IML-RESI MD300

Optional Accessories

IML-RESI MD300 without drill (only MD300) Item No. 4000150 900,00 $

IML-RESI MD300 with Bosh drill GSR 18V Li-Ion Professional - incl. 110V Li-Ion 18V battery charger + 2x Premium Li-Ion batteries 18V 3,0 Ah Item No. 4000152 1.515,00 $

Drilling needles IML-RESI MD300 (10 pieces per pack) Length 387 mm Item No. 3100317 183,00 $

Quiver for MD300 drilling needles For safe storage of approximately 50 drilling needles Item No. 3103016 42,00 $

Aluminium transport case incl. foam inlay and key Item No. 3100311 247,00 $

Lightweight hand drill, fast and easy to use

IML-RESI MD300

The IML-RESI MD300 is a purely mechanical drill that does not record an electronic or mechanical measure-ment curve. The user ‘feels’ the result and can read the penetration depth on the 300 mm scale. Often an abrupt and fast penetration is perceptible when the instrument detects a rot zone. Even conifer year rings can be felt.

• Cordless drill as drive unit• Sturdy stainless steel housing• Easy to read 1:1 depth scale• Diameter of the drilling needle:

Needle tip: Ø 3,0 mm Needle shaft: Ø 1,5 mm

• Available drilling depth 300 mm• Drill spindle for external drill: Ø 12 mm

Scope of delivery (standard):• MD300 drill attachment (depth 300 mm)• 1x drilling needle (Length 387 mm)• Chuck key• Instructions manual

Drilling depth scale 1:1

IML-RESI MD300

IML-RESI MD300


6

IML PowerDrillUncompromisingly precision for all applications


7

IML PowerDrill

IML-RESI PD200 Drilling depth 200 mm Item No. 3100900-2PD 7.215,00 $







Uncompromisingly precision for all applications

The IML Power Drill can be used anywhere where reliable and meaningful test results are required.

• Comfortable with clear display• Easy, fast and digital recording of the measurement

data• Fatigue-free operation due to the ergonomic design

and low overall weight• High drilling performance with minimal energy

consumption• Rugged and splashproof aluminium housing• Simultaneous recording of drilling resistance and feed

cam for better decay detection • Automatic curve evaluation for wooden poles

Integrated 45° adapter

IML-RESI PD400

IML-RESI PD-Series

Scope of delivery (standard):• Measuring instrument PD with a mounted drilling

needle, 25 m standard memory, quiver with 5 drilling needles, 110V battery charger Li-Ion 18V, 2x premium 18V 3,0 Ah Li-Ion batteries, mini-USB 2.0 data transfer cable, drill chuck with tools, pliers, system transportca-se, IML Software Center PD tools, Instructions Manual


8

Add-on Module Needle Check NC

Automatic check of needle tip for breakage and wear after every measurement. Different wear tolerances can be selec-ted when ordering. The status of the needle (‚ok‘ / ‚worn‘) is stored with each measurement.

Add-on Module Needle Check NC Item No. 4100015 740,00 $

Optional add-onsIML-RESI PD-Series

IML Software Center PD-Tools PRO

Extended Evaluation Software

Memory Enlargement

Please note: If the FEED add-on module is installed, then specified memory lengths are halved.

IML Software Center PD-Tools PRO incl. 3 installation licences Item No. 3100808 890,00 $

Multi User Licence Activation of software for another PC or handheld (for more than three installations) Item No. 3100890 210,00 $

Memory Enlargement MEM1 50 metres recording length of the measurement curves Item No. 4100008 145,00 $



Add-on Module WoodInspector

The IML WoodInspector is an additional module for the PD-Tools PRO software package. An automatic assessment of wooden poles is performed by the IML WoodInspector. Its features are: graphic and numerical cavity detection, detec-tion of decay and incipient decay, evaluation of the data feed, automatic diameter detection for automatic withdrawal of the drilling needle after exiting below a particular drilling angle, displaying the drilling result immediately after drilling, Individual user adjustment.

IML WoodInspector Item No. 3100814 1.420,00 $

IML WoodInspector Complete package incl. IML WoodInspector, FEED, TLT and SCL Item No. 3100815 2.160,00 $


Functions:• Standard software functions: Configuration, transfer, analysis, magnification, print-out and saving• PRO version additional features: Export, averaging, printing, cavity detector, tree-ring analysis and simultaneous display and transmission of the measured curve during drilling on PC or handheld

9

Add-on Module Tilt Sensor TLT

Tilt angle display and storage. Further options include setting two preferred angles with optical and acoustic indicators and disable function if the tilt is outside the set tolerance. Optional tilt compensation in the drilling depth preselection..

Add-on Module Tilt Sensor TLT Item No. 4100018 242,00 $

Add-on Module Scaling Package SCL

Scaling of the drilling depth on a scale of 1:1, magnification, and overall view (full drilling depth on display width). Scaling of the amplitude to a fixed factor of 1.0 / 1.5 / 2.0 / 2.5 / 3.0 or automatic scaling

Add-on Module Scaling Package SCL Item No. 4100019 242,00 $

Add-on Module Access Control ACS

Records of almost all functions and settings with a password prompt. Avoids an unintentional change of device settings.

Add-on Module ACS Item No. 4100020 135,00 $

Add-on Module RCI

Interface for configuration, control and data transfer to customer software (not using PD-Tools/PD-Tools Pro). The data may be processed further directly by the customer software.

Add-on Module RCI Item No. 3100807 1.430,00 $

Optional add-onsIML-RESI PD-Series

Add-on Module FEED

Additional recording of the feed curve (compressive force) next to the drilling curve (torsional force). In some cases the feed curve contains a significantly reduced curve or no skirt friction at all acting on the drilling needle. This means that it is considerably easier to detect the difference between healthy and damaged wood. In addition, it is easier to diagnose rot on the feed curve at an early stage.

Add-on Module FEED Item No. 4100017 435,00 $


10

Cleaning Tool

Tool for cleaning the front adapter

Cleaning Tool Item No. 4100051 23,00 $

Handle

Additional handle which can be attached to the device in different positions

Handle Item No. 4100024 72,00 $

Optional AccessoriesIML-RESI PD-Series

Shoulder Strap

Shoulder strap with 2 snap hooks and 2 sturdy eyelets on the instrument

Shoulder Strap Item No. 30009903 70,00 $

Bluetooth Printer

On-site print-out of measurements on a 1:1 scale

Bluetooth Printer incl. 10 Thermal-Paper rolls Item No. 4100014 1.037,00 $

Premium Batteries

Spare batteries

Premium Battery 18V Li-Ion 3,0 Ah Item No. 30009933 270,00 $

Transport bag

Transport bag for IML-RESI PD instrument with practical side pockets for batteries, pliers and quiver

Transport bag for IML-RESI PD300 / PD400 Item No. 4100047 185,00 $

Transport bag for IML-RESI PD500 Item No. 4100053 200,00 $


11

System Transport Case

Stable system transport case with foam insert and key

Transport Case for IML-RESI PD200 / PD300 / PD400 Item No. 3100711 362,00 $

Transport Case for IML-RESI PD500 Item No. 3100811 390,00 $




Quiver for Drilling Needles

For safe storage of approximately 50 drilling needles

Quiver for IML-RESI PD200 / PD300 / PD400 Item No. 3104017 42,00 $

Quiver for IML-RESI PD500 Item No. 3105020 42,00 $




Optional AccessoriesIML-RESI PD-Series


12

Threaded Drilling Needles for Pole Inspection

With special and improved surface coating (10 pieces per pack)

IML-RESI PD200 (Ø 2,8 mm tip / length: 421 mm) Item No. 3100329 190,00 $







DisposablesIML-RESI PD-Series

Standard Threaded Drilling Needles









Standard Drilling Needles ‚Click‘










13

DisposablesIML-RESI PD-Series

Drilling Needles for Pole Inspection ‚Click‘









Thermal-Paper Rolls

Thermal-Paper rolls for IML-RESI PD-Series Bluetooth printers(10 pieces per pack)

Thermal-Paper Rolls Item No. 3100336 42,00 $


14

Spare PartsIML-RESI PD-Series

Exchangeable Telescope

Exchangeable telescope with complete recording of the needle guidance in the event of needle breakage

Exchangeable Telescope PD200 / PD300 / PD400 Item No. 4100016 590,00 $

Exchangeable Telescope PD500 Item No. 4100021 720,00 $



Exchangeable Telescope PD1000 Item No. 4100023 1.040,00 $

Exchangeable Drill Chuck ‚Threaded‘

Exchangeable drill chuck with threaded socket

Exchangeable Drill Chuck for all PD-Series instruments Item No. 10500-028 240,00 $

Exchangeable Drill Chuck ‚Threaded‘ with Tool

Exchangeable drill chuck ‚threaded‘ with tool

Exchangeable Drill Chuck ‚Threaded‘ with Tool PD200 - PD750 Item No. 10500-027/3 435,00 $

Exchangeable Drill Chuck ‚Threaded‘ with Tool PD1000 Item No. 10500-027/10 435,00 $

Exchangeable Drill Chuck ‚Click‘

Exchangeable drill chuck with ‚Click‘ System

Exchangeable Drill Chuck for all PD-Series instruments Item No. 10500-048 240,00 $


Exchangeable Drill Chuck ‚Click‘ with Tool

Exchangeable drill chuck ‚click‘ with tool

Exchangeable Drill Chuck ‚Click‘ with Tool PD200 - PD750 Item No. 10500-048/3 435,00 $

Exchangeable Drill Chuck ‚Click‘ with Tool PD1000 Item No. 10500-048/10 435,00 $

15

45° Adapter

Aluminium adapter

45° Adapter Item No. 3100932 72,00 $

Front Adapter

Complete front adapter made of brass

Front Adapter with measuring sleeve Item No. 3100937 145,00 $

Disinfection Adapter

Adapter for disinfecting the drilling needle

Disinfection Adapter for standard drilling needles Item No. 4100043 130,00 $

Disinfection Adapter for pole inspection drilling needles Item No. 4100042 130,00 $

Felt Wheels 10 pieces Item No. 4100044 15,00 $

Spare PartsIML-RESI PD-Series


16

IML-RESI F-SeriesCompact and flexible use


17


The IML-RESI F-Series can be used anywhere where relia-ble and meaningful test results are required.

• Cordless drill as a drive unit• On-site documentation of measurement results• Recording of the measurement curve on weather-proof

wax paper strips• Add-on innovative Bluetooth electronic unit enables

rapid digital acquisition of measurement data• Low weight ensures efficient operation even in difficult

operational areas• Splash-proof stainless steel housing with plexiglass

cover to protect the measurement record• Measurements below 45° using snap-on adapter

The IML-RESI F-Series is available in two versions for diffe-rent applications:• Tree Care and Tree Inspection• Construction Wood

Further two enhanced versions can be ordered:

Snap-on 45° Adapter

IML-RESI F300SX

IML-RESI F-Series

Scope of delivery (Tree Care and Tree Inspection):• F-Series measurement device with mounted drilling

needle• Bosch drill GSR 18V Li-Ion Professional with adapter

ring• 110V Charger Li-Ion 18V and 2x 18V Li-Ion 3,0 Ah

batteries• Shoulder strap• 5x drilling needles and 400x wax paper strips• Paper cassette• Tool for maintenance ‚Tool Kit‘• Aluminium transport case• Instructions Manual

Scope of delivery (Construction Wood):• F-Series measurement device with mounted drilling

needle for 45° Adapter• Bosch drill GSR 18V Li-Ion Professional with adapter

ring• 110V Charger Li-Ion 18V and 2x 18V Li-Ion 3,0 Ah

batteries• Shoulder strap• 45° Adapter• 5x drilling needles for 45° Adapter and 400x wax pa-

per strips• Paper cassette• Tool for maintenance ‚Tool Kit‘• Aluminium transport case• Instructions Manual

• S-Version: Particularly stable design of the needle support for frequent use in hardwoods• SX-Version: Improved needle guidance using the exchangeable telescope


18

IML-RESI F300 (Tree Care and Tree Inspection) Drilling depth 300 mm Item No. 3100800-3S 3.720,00 $




IML-RESI F-Series for Tree Care and Tree Inspection

IML-RESI F300S (Tree Care and Tree Inspection) Drilling depth 280 mm Item No. 3100810-3S 4.050,00 $



IML-RESI FS-Series for Tree Care and Tree Inspection (reinforced S-Version)

IML-RESI F300SX (Tree Care and Tree Inspection) Drilling depth 280 mm Item No. 3100810-3SX 4.650,00 $



IML-RESI FSX-Series for Tree Care and Tree Inspection (reinforced SX-Version)


19


IML-RESI F150 (Construction Wood) Drilling depth 150 mm Item No. 3100150 3.715,00 $

IML-RESI F300 (Construction Wood) Drilling depth 300 mm Item No. 3100900-3S 3.870,00 $



IML-RESI F-Series for Construction Wood

IML-RESI F300S (Construction Wood) Drilling depth 280 mm Item No. 3100910-3S 4.200,00 $



IML-RESI FS-Series for Construction Wood (reinforced S-Version)

IML-RESI F300SX (Construction Wood) Drilling depth 280 mm Item No. 3100910-3SX 4.800,00 $



IML-RESI FSX-Series for Construction Wood (reinforced SX-Version)


20

Bluetooth Electronic UnitIML-RESI F-Series

Each IML-RESI F Series can be expanded using the Blue-tooth Electronic Unit. The Bluetooth Electronic Unit enab-les rapid digital capture of measurement data

Functions:• Electronic storage of measurement data to internal

memory• Input of 40-digit ID numbers and remarks• USB and Bluetooth interface for connection to a PC or

handheld device• Wireless transmission of measurement record• Simultaneous recording of drilling curve• Displays the feed rate, remaining memory length,

battery state, the drilling stage and the date and time

Bluetooth Electronic Unit

Bluetooth Electronic Unit for IML-RESI F Series

Scope of delivery (standard):• Bluetooth electronic unit with built-in Li-Ion battery and 20 m recording length of the measured curves• Charger with USB connector (110V - 240V)• USB data transfer cable• Bluetooth USB-Adapter• IML Software Center F-Tools Functions: Configuration and readout of electronic, transmission of measurement data via USB or Bluetooth, analysis and storage of data on a PC or handheld device, magnification, scaling, evaluation and printing of measurements

Bluetooth Electronic Unit Item No. 4100007 3.045,00 $

Bluetooth Electronic Unit for IML-RESI F-Series


21

Optional AccessoriesBluetooth Electronic Unit for IML-RESI F-Series

Memory Enlargement M40 40 metres recording length of measurements Item No. 4100008 142,00 $



Memory Enlargement for Bluetooth Electronic Unit

IML Software Center F-Tools PRO

Advanced software with standard F-Tools features plus exporting, averaging, printing of measurements, cavity detector, tree-ring analysis and simultaneous recording and transmission of measurement on a PC or handheld device

IML Software Center F-Tools PRO Item No. 3100803 885,00 $

Pole Inspector (incl. IML Software Center F-Tools PRO)

Automatic cavity evaluation and analysis of external decay

Pole Inspector Item No. 3100806 1.342,00 $

Multi User Licence

Activation of software for another PC or handheld device (for more than three installations)

Multi User Licence Item No. 3100890 210,00 $


22

Bosch Drill

Drive Unit for IML-RESI F-Series

Bosch Drill GSR 18V Li-Ion Professional incl. charger, 2x Premium Li-Ion 18V 2.6 Ah batteries, adapter ring and instructions Item No. 31000118 630,00 $

Optional AccessoriesIML-RESI F-Series

Quiver for Drilling Needles

For safe storage of approximately 50 drilling needles

Quiver for IML-RESI F300 / F300S / F300SX Item No. 3103016 42,00 $



Transport Case

Transport case made of aluminium with foam insert and key

Transport Case for IML-RESI F150 Item No. 3100611 247,00 $

Transport Case for IML-RESI F300 / F300S / F300SX Item No. 3100311 247,00 $



Transport Case ‚PROFI‘

Sturdy transport case with foam insert and key

Transport Case ‚PROFI‘ for IML-RESI F300 / F300S / F300SX Item No. 3100312 377,00 $




23

Batteries

Spare batteries for Bosch Drill GSR 12V Professional

Battery 12V 2,0 AhNiCd Item No. 30009924 152,00 $

Optional AccessoriesIML-RESI F-Series

Batteries

Spare batteries for Bosch Drill GBM 12VES-2

Battery 12V 3,0 AhNiMh Item No. 30009930 196,00 $

Premium Batteries

Spare batteries for Bosch Drill GSR 18V Li-Ion Professional

Premium Battery 18V Li-Ion 3,0 Ah Item No. 30009933 270,00 $


24

Standard Drilling Needles for 45° Adapter


IML-RESI F150 (Ø 3,0 mm tip / length: 237 mm) Item No. 3100116 183,00 $

IML-RESI F300 / F300S / F300SX (Ø 3,0 mm tip / length: 387 mm) Item No. 3100317 183,00 $



DisposablesIML-RESI F-Series

Standard Drilling Needles


IML-RESI F300 / F300S (Ø 3,0 mm tip / length: 372 mm) Item No. 3100316 168,00 $



Drilling Needles for Pole Inspection for 45° Adapter



IML-RES F400 / F400S / F400SX (Ø 2,8 mm tip / length: 497 mm) Item No. 3100419 148,00 $


Wax Paper Strips (cm)

Wax paper strips with cm-scale (400 pieces per pack)

IML-RESI F150 Item No. 3100115 225,00 $

IML-RESI F300 / F300S / F300SX Item No. 3100315 225,00 $




25

Spare PartsIML-RESI F-Series

45° Adapter

Snap-on adapter allows measurements below 45° to the ground level

45° Adapter incl. sleeve, extension of needle guidance and assembly instructions Item No. 3100015 181,00 $

Shoulder Strap

Shoulder strap with two eyelets

Shoulder Strap Item No. 30009907 23,00 $

‚Tool Kit‘

Tool kit for minor maintenance and repair operationsIncl. 1 screwdriver 4 mm, 1 component pliers, pin punch, 1 hexagon pin spanner with t-handle 2,0 and 2,5 mm, 1 hexa-gon wrench 1,5 mm, hook spanner, 1 pair Nord-Lock discs, 2 clutch discs, 1 clutch bushing, 1 clutch nut, 3x Faceplates 0,5, disassembly magnet, 6 casing screws, 5 safety pins and 1 oil can

Tool Kit Item No. 3100010 240,00 $

Safety Pins

Safety Pins for overload protection (10 pieces per pack)

Safety Pins Item No. 3800-059 20,00 $

DisposablesIML-RESI F-Series

Wax Paper Strips (inch)

Wax paper strips with inch-scale (400 pieces per pack)

IML-RESI F150 Item No. 3100118 225,00 $





26

Exchangeable Telescope

Exchangeable telescope with complete recording of the needle guidance in the event of needle breakage

Exchangeable Telescope F300SX / F400SX Item No. 4100016F 610,00 $

Exchangeable Telescope F500SX Item No. 4100017F 610,00 $

Clutch Cover

Covering of Clutch

Clutch Cover Item No. 3800-065 6,50 $

Spare PartsIML-RESI F-Series


27

Spare PartsElectronic Unit IML-RESI F-Series

USB Connection Cable

USB Connection Cable for serial Electronic Unit of the IML-RESI F-Series

USB Connection Cable USB Port RS232 Com-Port (9-pin) Item No. 31000302 40,00 $

Charger with USB Connector (110V - 240V)

Charger for Bluetooth Electronic Unit of the IML-RESI F-Series

Charger with USB Connector Item No. 4100011 93,00 $

Bluetooth USB Adapter with USB Cable

USB adapter for wireless Bluetooth connection andUSB connection cable (length: 185 cm) for Bluetooth Electronic Unit of the IML-RESI F-Series

Bluetooth USB Adapter with USB Cable Item No. 4100012 77,00 $

Bluetooth USB-Adapter

USB Adapter for the wireless Bluetooth connection (individual) for Bluetooth Electronic Unit of the IML-RESI F-Series

Bluetooth USB-Adapter Item No. 4100013 52,00 $

Serial Data Transfer Cable

Data Transfer Cable for serial Electronic Unit of the IML-RESI F-Series

Serial Data Transfer Cable RS232 Com-Port (9-pin) to RS232 Com-Port (15-pin) Item No. 31000301 33,00 $


28



IML-RESI E300 (Ø 3,0 mm tip / length: 489 mm) Item No. 30003905 261,00 $



IML-RESI E-Series DisposablesIML-RESI E-Series






Paper Rolls

Paper Rolls for IML-RESI E-Series (10 pieces per pack)

Paper Rolls Item No. 30009900 18,00 $

Standard Ink Ribbon

Ink Ribbon for IML-RESI E-Series (1 piece)

Ink Ribbon Item No. 30009905 14,00 $

Battery

Spare batteries for IML-RESI E-Series

Battery 7,2V 3,0 AhNiMh Item No. 30009929 156,00 $


29



IML-RESI M300 (Ø 3,0 mm tip / length: 415 mm) Item No. 3000319 197,00 $

IML-RESI M-Series DisposablesIML-RESI M-Series





Wax Paper Strips

Wax paper strips with cm/inch-scale (400 pieces per pack)

IML-RESI M300 (cm-scale) Item No. 3000315 254,00 $

IML-RESI M500 (cm-scale) Item No. 3000515 275,00 $

IML-RESI M300 (inch-scale) Item No. 3000325 254,00 $

IML-RESI M500 (inch-scale) Item No. 3000525 275,00 $

Batteries

Spare batteries for IML-RESI M-Series

Battery 7,2V 3,0 AhNiMh Item No. 30009929 156,00 $


30



IML-RESI B300 (Ø 3,0 mm tip / length: 455 mm, rotatable) Item No. 3091280 261,00 $

IML-RESI B400 (Ø 3,0 mm tip / length: 574 mm, rotatable) Item No. 3081410 275,00 $

IML-RESI B-Series DisposablesIML-RESI B-Series



IML-RESI B300 (Ø 3,0 mm tip / length: 429 mm) Item No. 3051280 246,00 $



Thermal-Paper Rolls

Thermal-Paper Rolls for IML-RESI B-Series (10 pieces per pack)

Thermal-Paper Rolls Item No. 3000450 76,00 $


31

Chargers for IML-RESI SystemsIML-RESI MD300, PD-Series, F-Series, M-Series, E-Series

Fast Charger 110V

For all batteries in the MD, F, M and E series, except premium batteries with Li-Ion technology. For batteries with a voltage of 7,2V - 14,4V

Fast Charger 110V Item No. 30009911 334,00 $

Fast Charger for Premium Batteries with Li-Ion Technology 110V - 220V

Only for premium 18V batteries with Li-Ion technology in the MD, F and PD series

Fast Charger 220V for 18V Li-Ion Premium Batteries Item No. 30009932 246,00 $

Fast Charger 110V with US Plug for 18V Li-Ion Premium Batteries Item No. 30009934 268,00 $

Standard Charger 110V with US-Plug

For all batteries in the MD, F, M and E series, except premium batteries with Li-Ion technology. For batteries with a voltage of 4,8V - 12V

Standard Charger 110V with US-Plug Item No. 30009916 246,00 $


32

IML Fractometer I

IML Fractometer I Item No. 4000100 1.153,00 $

Bending strength measurement

The IML Fractometer I measures the bending strength of a previously removed wood core sample. The measuring range extends over 150FU (fractometer units). Different bending forces are adjustable by means of an adjustment wheel.

Scope of delivery:• Fractometer I• Leather pouch• Instructions Manual

IML Fractometer I

IML Fractometer I

IML Fractometer II

IML Fractometer II Item No. 4000200 2.590,00 $

IML Fractometer II with aluminium transport case, foam insert and key Item No. 4000202 2.865,00 $

Bending and compression strength measurement

The IML Fractometer II measures the bending and com-pression strength of a previously removed wood core sample.

Scope of delivery:• Fractometer II• Cutting knife• Tweezers• Cutting boards• Test pin• Instructions Manual

IML Fractometer II

IML Fractometer II


33

IML Fractometer II Complete Set

IML Fractometer II Complete Set Item No. 4000250 3.400,00 $

Bending and compression strength measurement

The IML Fractometer II measures the bending and com-pression strength of a previously removed wood core sample.

Scope of delivery:• Fractometer II, cutting knife, tweezers, cutting board,

test pin, instructions manual• Jim-Gem increment borer (drilling depth 400 mm) with

instructions manual• Extension and pull-off loops for the taking core

samples• IML probing rod with extension (length 900 mm)• Maintenance kit with 6 x wooden supporting battens,

1x glue can, 1x oil can, 1x ejector for cores, 1x grinds-tone for interior of drill, 1x grindstone for exterior of drill, 1x cleaning brush with extension and 2x spare bolts for increment borer

• Aluminium transport case with foam insert and key

IML Fractometer II

IML Fractometer II Complete Set


34

‚Jim-Gem‘ Increment Borer

‚Jim-Gem‘ Increment Borer Drilling depth 400 mm Item No. 4000121 340,00 $

Extraction of core samples

‚Jim-Gem‘ increment borers are used for taking core samples and thus checking the quality of the wood and measuring the growth rate of trees. The increment borers are manufactured from special steel and Teflon coated to prevent friction heat (important for inspecting standing / sap conducting trees).

• Drilling depth: 400 mm• Cutting edge: 3-helical• Core diameter: 5,0 mm

Scope of delivery:• Increment borer with shank, drill and needle• Instructions Manual



Extension and Pull-Off Loops

Extension to increase the leverage effect when screwing the increment borer in and out

Extension and Pull-Off Loops for ‚Jim-Gem‘ Increment Borer Item No. 4000145 218,00 $

Optional Accessories‚Jim-Gem‘ Increment Borer

Ejector

Ejector for damage-free extraction of the drill cores from the increment borer

Ejector for ‚Jim-Gem‘ Increment Borer Item No. 4000128 22,00 $


35

Maintenance Set

Maintenance set for Jim-Gem Increment Borer, individual or complete set.

Scope of delivery for individual maintenance set:1x ejector for drilling cores, 1x grinding wheel for drills inside, 1x grindstone for interior of drill, 1x grindstone for exteri-or of drill, 1x oil can, 1x cleaning brush with extension and 2x spare bolts

Scope of delivery for complete maintenance set:‚Jim-Gem‘ Increment Borer (drilling depth: 400 mm, 3-helical blade) with shank, drill and needle, 1x ejector, 1x grindsto-ne for interior of drill, 1x grindstone for exterior of drill, 1x oil can, 1x cleaning brush with extension, 2x spare bolts and 6x supporting battens of wood with glue can

Individual Maintenance Set Item No. 4000127 167,00 $

Complete Maintenance Set Item No. 4000126 515,00 $

Optional Accessories‚Jim-Gem‘ Increment Borer


36

IML Micro Hammer

IML Micro Hammer with 1 microsensor Item No. 41002004 4.040,00 $

IML Micro Hammer with 3 microsensors Item No. 41002005 4.960,00 $

Sound Velocity Measurement

The IML Micro hammer detects early decay at various stages as well as ring shake, cracks and hollows. A ham-mer will generate a pulse that is detected and measured by microsensors.

Application areas:• Tree care and inspection to maintain safe parks, road-

ways and forests• Assessment of tree damage and the residual wall thick-

ness

IML Micro Hammer

IML Micro Hammer

Add-on Module RCI (Remote Control Interface)

Interface for configuration, control and transfer data to and from internal client software (not using of M tools). The data may be further processed directly by the client software.

Add-on Module RCI (Remote Control Interface) Item No. 3100807 1.430,00 $

Optional add-onsIML Micro Hammer

Scope of delivery:• Electronic unit in a shock-resistant, water-proof housing• Hammer (pulse generator) and microsensor (pulse receiver)• 10x stainless steel fixing screws • 4x magnets for sensor mounting• USB data transfer cable with Bluetooth USB-Adapter• Charger 110V - 240V• Bosch Mini Cordless Screwdriver IXO 3,6V with charger and manual• Aluminium transport case• Instructions Manual• IML Software Center M-Tools Functions: Configuration and readout of the electronic unit, transmission, evaluation and storage of measurement data on a PC or handheld device


37

Spare PartsIML Micro Hammer

Hammer

Replaceable hammer for IML Micro Hammer

Hammer Item No. 4100109 587,00 $

Microsensor

Replaceable microsensor for IML Micro Hammer

Microsensor Item No. 4100110 536,00 $

Magnetic Impact Cap

Magnetic impact cap for IML Micro Hammer

Magnetic Impact Cap Item No. 4100107 19,00 $

Magnet Set

Spare magnet with two mounting screws for IML Micro Hammer

Magnet Set Item No. 4100106 14,00 $

Mounting Screws

Stainless steel mounting screws, length 60 mm / Ø 4 mm (10 pieces per pack)

Mounting Screws Item No. 4100108 27,00 $

Bosch Mini-Screw Driver IXO Li-Ion

Mini-Screw Driver to insert mounting screws for IML Micro Hammer, incl. charger and manual

Bosch Mini-Screw Driver Li-Ion 3,6V Item No. 4100111 123,00 $


38

Charger with USB Connector (110V - 240V)

Charger for IML Micro Hammer

Charger with USB Connector Item No. 4100011 93,00 $

Bluetooth USB Adapter with USB Cable

USB adapter for wireless Bluetooth connection and USB connection cable (length: 185 cm) for IML Micro Hammer

Bluetooth USB Adapter with USB Cable Item No. 4100012 77,00 $

Bluetooth USB Adapter

USB adapter for wireless Bluetooth connection for IML Micro Hammer

Bluetooth USB Adapter Item No. 4100013 52,00 $

Spare PartsIML Micro Hammer


39

IML Measuring Table

IML Measuring Table without Microscope Item No. 5000200 4.635,00 $

IML Measuring Table incl. Leica S6E L2 Zoom Stereo Microscope Item No. 5000202 8.970,00 $

IML Measuring Table incl. Digital Microscope DigiMicro 1.3 Item No. 5000203 5.055,00 $

Annual Ring Analysis

The IML Measuring Table is used for studying the growth rate of wood samples. An easy-to-use electronic unit hel-ps do the evaluation, as well as 2 optional microscopes for analysis of very low growth rates.

IML Measuring Table

IML Measuring Table

Scope of delivery:• Measuring Table• Electronic unit with serial data transfer cable and char-

ger 110V-240V• 2x recording strips for cores (wood support strips)• Instructions Manual• IML Software Center T-Tools PRO Functions: Configuration and readout of electronic unit, transfer, evaluation, storage, magnification and printing of measurement data on a PC or laptop

Leica S6E L2 Zoom Stereo Microscope:incl. mounting on IML measuring table

• Viewing angle: 38°• Lens: 0,63x, achromatic• Magnification: max. 40x zoom• Max. resolution: 432 LP/mm• Max. aperature: 0144 nA• Field of view / distance: 36,5 mm / 55 mm

Digital Microscope DigiMicro:incl. adjustable bracket on IML Measuring Table

• Image resolution: 1280 x 960• Dual Axis: 27x and 100x microscope lens• Magnification: max. 200x zoom• Focus: 10 mm to infinity• Video mode: max. 30 fps at 600 Lux• Shutter speeds: 1 sec. up to 1/1000 sec.

The IML Measuring Table can be optionally extended with 2 microscopes, an analogue and a digital version

IML Measuring Table with Leica Microscope


40

Service and Calibration

Service for IML-RESI PD-Series Item No. 8888PD 340,00 $

Service for IML-RESI F-Series (without electronic unit) Item No. 8888F 230,00 $

Service for IML-RESI F-Series (with electronic unit) Item No. 8888FE 326,00 $

Service for IML-RESI E-Series Item No. 8888E 340,00 $

Service for IML-RESI M-Series Item No. 8888M 275,00 $

Service for IML-RESI B-Series Item No. 8888B 470,00 $

Service for IML Fractometer I Item No. 8888FR 125,00 $

Service for IML Fractometer II Item No. 8888FR 125,00 $

Service for IML Micro Hammer Item No. 8888I 195,00 $

Annual service inspection

In order to guarantee the measuring accuracy of IML pro-ducts, regular maintenance and calibration of measuring instruments should be carried out by our qualified service team. The inspection of measuring instruments should be carried out at yearly intervals.

Service and Calibration

Service and Calibration of IML Products

An inspection includes:• Complete function and safety test• The unit is disassembled, the functional parts precisely controlled and checked• All mechanical moving parts are cleaned and permanently lubricated with special LongLife oil• Implementation of test measurements and final calibration• Creation of a detailed service report and a calibration sheet / test report


41

IML Tree Labels

Setup costs for lasering per order 40,00 $

IML Tree Labels 100 pieces per piece 1,45 $



IML Tree Labels 1.000 pieces per piece 1,10 $




Aluminium Tree Labels

IML Tree Labels made of anodized aluminium.The aluminium plates labelled using laser technology according to your requirements are very easy to read. The anodized coating ensures a long service life and durability. The IML Tree Labels are available in black, red, green, and blue. The Tree Labels are made from scratch-resistant and weatherproof (AlMg1) aluminium, the white laser lettering (black lettering for silver tree tags) means they are easy to read in the sunlight. The tree tags can be individually laser-labelled to your specifications, also on both sides.

Item No. 4000170

Label: • Continuously numbered and optionally with additional

text• Logo or Symbol• Data Matrix or QR-Code• Number ranges or Excel list

IML Tree Labels

IML Tree Labels

Dimensions:• Diameter: 35 mm• Thickness: 1 mm• Mounting hole: 3 mm• Label field: 30 mm x 25 mm


42

IML Probe Rod

IML Probe Rod Standard Length 600 mm Item No. 4000147 53,00 $

Extension for IML Probe Rod Length 300 mm Item No. 4000148 17,00 $

Tree Inspection Accessories

The IML Probe Rod assists you locate decay in trees. The robust stainless steel rod can be extended by up to 1500 mm by a threaded fitting. The standard length is 600 mm and the diameter is 7,0 mm. The IML Probe Rod also has a 100 mm scale.

IML Probe Rod with extension

IML Probe Rod

IML Inspection Rod

IML Inspection Rod Length 800 mm Item No. 4000146 18,00 $


The IML Inspection Rod helps you locate decay in trees. Length: 800 mm; Diameter: 5,0 mm.

IML Inspection Rod

IML Inspection Rod


43

Caliper

Caliper Item No. 4100048 38,00 $

General Accessories

Calipers are used to determine the diameter of wooden poles, playground equipment, trees or timber beams. The measuring tool has an easily legible scale on each side, easily visible in the sunlight. The scale has a range of up to 32 cm.

Caliper

Caliper

IML Penetrometer

IML Penetrometer Item No. 4000149 406,00 $


The IML Penetrometer is a mechanical gauge to determi-ne the density of the soil. A 2.0 kg heavy falling weight is mounted on a 8.0 mm thick rod. The falling weight is dropped and encounters resistance, causing the rod to penetrate the ground. The penetration depth can be read by means of a scale.

IML Penetrometer

IML Penetrometer


44

Heel

Heel Item No. 4100049 12,00 $

General Accessories

Heels are used to uncover wooden poles, playground equipment and trees. The exposed measuring object allows you to easily make a measurement at a specific angle. The heel is made of lightweight and durable plastic and is therefore very comfortable to use and transport.

Heel

Heel

Stainless Steel Model

Stainless Steel Model Item No. 4000135 36,25 $

Multi-purpose tool by Prof. Dr. Claus Mattheck and Dr. Klaus Bethge

The stainless steel model is an multi-purpose tool for tree diagnosis. This tool measures the slenderness of tree trunks and branches. It may also be a non-dogmatic guide for shaping the crown of a tree according to the shape of brook pebbles. The model can show the highly loaded space under the tree determined with the force core method.

Stainless Steel Model

Stainless Steel Model for Tree Diagnosis


45

Hazard Beam

Hazard Beam Item No. 4000132 54,00 $

Wood Model by Prof. Dr. Claus Mattheck

The hazard beam shows the emergence of a hazard beam crack on trees.

Hazard Beam

Hazard Beam

Height Measurement Tool

Height Measurement Tool Item No. 4000134 71,00 $

Complete Set Height Measurement Tool and Hazard Beam Item No. 4000138 114,00 $

Wood Model by Prof. Dr. Claus Mattheck

This survey tool provides an approximate measurement of tree height, but especially of the H/D ratio (degree of slenderness) of trees, co-dominant stems and also bran-ches.




46

‚Stupsi Explains the Tree‘

‚Stupsi Explains the Tree‘ Item No. 3000015e 30,00 $

Technical Literature

A hedgehog tells us all about the body language of trees. (4th revised edition)

Author: Prof. Dr. Claus MattheckISBN: 978-3-923704-72-9

Price incl. 7% VAT



‚The Face of Failure in Nature and Engineering ‘

‚The Face of Failure in Nature and Engineering‘ Item No. 3000020e 55,00 $


Form and failure in nature and technology.

Author: Prof. Dr. Claus MattheckISBN: 978-3923704415

Price incl. 7% VAT

‚The Face of Failure in Nature and Engineering‘

‚The Face of Failure in Nature and Engineering ‘


47

‚Updated Field Guide for VTA‘

‚Updated Field Guide for VTA‘ Item No. 3000022e 55,00 $



Price incl. 7% VAT

‚Updated field guide for VTA‘

‚Updated Field Guide for VTA‘


‚Thinking Tools after Nature‘

‚Thinking Tools after Nature‘ Art.-Nr. 3000024e 60,00 $


Extremely simple, no formulae!

Author: Prof. Dr. Claus MattheckISBN: 978-3-923704-73-6

Price incl. 7% VAT



48

‚Pauli the Bear: Tree Mechanics‘

‚Pauli the bear: Tree mechanics‘ Item No. 3000019e 35,00 $


Explained in the sensitive words of Pauli the Bear.


Price incl. 7% VAT




‚Manual of Wood Decay in Trees‘

‚Manual of Wood Decay in Trees‘ Item No. 3000018e 58,00 $


Brief description of the most important fungi on trees.


Price incl. 7% VAT.



49

‚Secret Design Rules of Nature ‘

‚Secret Design Rules of Nature‘ Item No. 3000021e 55,00 $


Ideal shapes without a computer.


Price incl. 7% VAT



Mattheck iPad AppTechnical Literature

With this iPad app you can read the popular science car-toons by Prof. Dr. Claus Mattheck in a printed version. In the app store, you will find interesting books and publica-tions, as well as free extracts. The app is available for free in the Apple App Store.

Mattheck iPad App

iPad App for Mattheck Books


50

General Conditions of Payment and Delivery IML North America, LLC.

I. GeneralThe following Terms and Conditions apply to all – including future - transactions with the customer. Any General terms and conditions of the customer shall not apply. We hereby expressly object to the validity of such conditions Ancillary agreements require the written form in order to be valid

II. Prices, Shipping, Payment1. Unless otherwise specified, prices shall be in euro and per piece. They shall apply ex works, excluding costs for packaging, postage, freight, insurance, plus statutory value added tax (within Germany). All prices are subject to change.2. Prices in our offer shall apply only to the order data on which the offer is based. Subsequent changes or additions at the customer›s request, as well as the resulting additional costs, shall be charged additionally.3. The goods shall be paid for within 30 calendar days from the date of the invoice, without any deductions.4. The delivery shall take place ex works and at the expense and risk of the customer. The goods shall be shipped at the customer›s request and at his risk and expense. Should shipment of the order be impossible through no fault of our own, the risk pas-ses to the customer upon notification of the readiness for dispatch. We are liable only for intent and gross negligence.5. No discount is granted for cash payments. The customer shall bear all costs incurred in the submission and acceptance of bills of exchange and cheques.

III. Delay of Payment1. In case of a delay of payment, we are entitled to charge the customer for the credit costs we have incurred. We reserve the right to claim further default damages.2. If instalments or bills of exchange have been agreed upon, the respective outstan-ding receivable is due immediately if the customer falls into arrears on more than 2 payments.3. In the case of the delay of more than 2 payments, we are entitled to withdraw from the contract.4. Should the fulfilment of our payment claim be endangered due to a deterioration of the financial situation of the customer, which has occurred or become known to us after conclusion of the contract, we are entitled to demand payment in advance and immediate payment of all open invoices not yet due, as well as withhold goods not yet delivered until payment, and stop the processing of current orders. We are also entitled to said rights if the customer does not make payment despite a reminder.

IV. Retention of Title1. We reserve the ownership of the goods until full payment of all claims from the business relationship with the customer.2. Should the goods delivered by us be compounded, mixed or blended with other goods, we acquire co-ownership of the new item in proportion to the value of our goods to the value of the other compounded, mixed or blended goods. Should the ownership of the goods cease to exist because it has become an integral part of another item, the customer already now grants us co-ownership of the principal item which is proportional to the value of the goods supplied compared to the value of the principal item. Co-ownership is already transferred to us, whereby handover is replaced by agreeing on a safekeeping relationship, on the basis of which the custo-mer keeps the principal item safe for us at his own expense. Upon payment of the accounts receivables, the co-ownership thus granted is transferred to the customer. 3. The customer is permitted to sell on the goods in an orderly business transaction during the course of his business operations. He is not entitled to pledge or assign the goods. We can revoke this authorisation if the customer falls into arrears of payment or economic distress, in particular if insolvency proceedings are opened against his assets.4. In the event that the new object is sold then the customer hereby assigns to us, for the security of our claims arising from the whole of the business relationship, his claim against the customer arising from its resale. The customer may at any time be required by us to provide information about the stock of assigned goods and grant us, or a person authorised by us, access to the relevant business documents. The customer is entitled to collect but not to assign the receivables to a third party. We are entitled to prohibit the collection of the receivables if the customer is in delay of payment, faces financial collapse, or judicial insolvency or composition proceedings are to be opened over his assets. If the overall amount of the assigned claims – in so far as unquesti-onable and feasible – exceeds our outstanding claims by more than 10 %, we are obliged, at the request of the customer, to assign on a pro rata basis the individual receivables with the respective excess amount to the customer.5. Contrary to No. 3, the customer shall not be entitled to sell the goods in the course of normal business transactions if he excludes the assignment of the receivables from the sale of the goods to us.6. If the customer is in arrears with payment, we are entitled to take back the goods.7. If the customer is a registered merchant, we shall also be entitled to take back and realise the goods after a prior warning in the case of default in payment on the part of the purchaser. The proceeds from the realisation shall be offset against the buyer›s liabilities.

V. Delivery Time1. Delivery dates shall not be binding unless they have been expressly confirmed in writing.2. Should timely delivery not be possible as a result of delayed or incorrect delivery from our suppliers, and we are not responsible for this circumstance, or should per-formance be impossible due to force majeure, acts of war, unrest, strikes, lockouts, sovereign interventions, destruction or damage of our production and operating equipment, for we cannot be held responsible, we shall be entitled to postpone the delivery or service by the period of the delay plus a reasonable starting period or to withdraw from the contract - in so far as not yet performed - partly or completely.

VI. Notification PeriodThe customer shall inspect the goods immediately upon receipt and, should the goods have obvious defects, notify us about said defects within a period of 2 weeks after receipt of the goods, or after handover by the freight forwarder in the event of dispatch; otherwise, the customer’s claims due to defects shall be excluded. In all other cases, deficiencies may be claimed only within the period of one year. The beginning of the period is the legal beginning of the limitation period (emergence of the claim).

VII. WarrantyOur products are warranted to be free of defects for a period of 1 year. The beginning of the period is the legal beginning of the limitation period (emergence of the claim).In the event of defects, we shall be entitled at our discretion to subsequent perfor-mance (rectification/replacement) up to the amount of the order value, unless there has been intent or gross negligence by ourselves or our vicarious agents. If a twofold attempt at subsequent rectification or replacement fails twice, or if rectification or replacement is impossible or unacceptable to the customer, or if we definitively refuse to said subsequent performance, the customer is entitled to demand a reasonable reduction in the price or withdraw from the contract.After fruitless expiry of a time limit previously fixed for subsequent performance, the customer is entitled to claim damages under the conditions set forth in § 437 No. 3, § 634 No. 4 BGB (German Civil Code), to the extent we are responsible for intent or gross negligence (with the exception of bodily injury).

VIII. DamagesWe are liable for all damages arising from culpable breach of contract if we ourselves or our vicarious agents are at fault, but only in case of damage by intention or gross negligence (with the exception of personal injury). The above also applies - insofar as legally permissible - also in the event of default or impossibility of performance. Liability for indirect damages is excluded should we be also liable for damages due to breach of contract based on minor negligence on our part or that of our vicarious agents. For damages caused by delay in our performance, we shall only be liable up to the amount of the order value (self-rendered services minus advance performance and material) if we or our vicarious agents are only culpable of minor negligence.

IX. Acceptance The customer shall accept the goods on the agreed completion date. If the customer is in default of acceptance, notwithstanding Section II. 3, the price agreed upon shall be due immediately. The customer is obliged to pay in advance any costs incurred for storage and insurance. If the customer does not meet this obligation, we are entitled to withdraw from the contract and to make other use of the goods, whereby the sales revenues gained in this case are credited to the price agreed upon. We are entitled to receive compensation for the lost profit.

X. Property The operating materials used by us for the manufacture of the product to which the contract relates, in particular special means of production (tools, devices, etc.) remain our property and shall not be delivered.

XI. Set-OffA set-off may only be exercised with a claim that is undisputed or determined by law. The customer shall only have a retention right as regards claims from the same con-tractual relationship.

XII. Applicability of German Law The law of the Federal Republic of Germany shall apply exclusively.The application of the uniform law governing the international purchase of movable objects and the law governing the conclusion of international purchase contracts for movable objects is excluded.

XIII. Place of Performance and Jurisdiction Place of performance and exclusive place of jurisdiction for business with registered traders is Heidelberg. However, we shall also be entitled to take action at the general legal venue. Should any provision of these Terms and Conditions or a provision within the framework of other agreements be or become invalid, the remaining provisions or agreements shall remain unaffected. The invalid or unenforceable provision shall be replaced by a legally effective provision which comes closest to the meaning and purpose of the invalid provision.


IML North America, LLCMail: PO Box 1363, Center Harbor, NH 03226Ship: 15 Glidden Rd., Moultonborough, NH 03254USA

Phone: 603-253-4600E-Mail: [email protected]: www.iml-na.com

Price List - iml-na.com · This price list is valid until the publication of a new price list,...

Documents

Transcript of Price List - iml-na.com · This price list is valid until the publication of a new price list,...