Price-list - ArcelorMittalsections.arcelormittal.com/.../5-Price_Info/price_list_2015_01_01.pdf ·...
25
ArcelorMittal Europe - Long Products Sections and Merchant Bars Price-list Beams, Channels and Merchant bars Austria / Belgium / Czech Republic / Denmark / Estonia / Finland / France / Germany / Hungary Italy / Latvia / Lithuania / Luxemburg / Norway / Poland / Slovakia / Slovenia / Sweden / Switzerland / The Netherlands Effective on new orders as of 1 st January 2015 ArcelorMittal
Transcript of Price-list - ArcelorMittalsections.arcelormittal.com/.../5-Price_Info/price_list_2015_01_01.pdf ·...
ArcelorMittal Europe - Long ProductsSections and Merchant Bars
Price-listBeams, Channels and Merchant bars
Austria / Belgium / Czech Republic / Denmark / Estonia / Finland / France / Germany / Hungary Italy / Latvia / Lithuania / Luxemburg / Norway / Poland / Slovakia / Slovenia / Sweden / Switzerland / The Netherlands
Effective on new orders as of 1st January 2015
ArcelorMittal
2
- All prices, rebates and extras shown in this price-list are understood to refer in EURO per 1000 kg unless otherwise indicated, plus the monthly scrap surcharge, where applicable.
- All extras are cumulative. In some markets, effective prices might be applied. The applicable extras are included in the effective price.
- By issuing the present price-list, the mills do not undertake to supply all the sizes and qualities mentioned. Acceptance of all particular specifications and prescriptions is subject to the seller’s approval.
- This price-list is established in accordance with our general conditions of sale and our payment and delivery conditions (in their latest version).
- Indirect exportation rebate or adjustment rebate: on price application.
General remarks
Illustration of price calculation
Beams Merchant barsBasis price Basis price+ +Size extra Size extra+ +Scrap extra (where applicable) Grade extra+ +Grade extra Length extra+ +Length extra Mill test certificates – Inspections+ +Mill test certificates – Inspections Finishing
+ +Finishing Quantity extra+Quantity extra
2 3
Summary
Chapter Page
1. Basis prices 3
2. Size extras 4
3. Grades and qualities 14
4. Lengths 17
5. Mill test certificates – Inspections 18
6. Finishing 19
7. Quantities 20
8. Miscellaneous 21
9. Agencies 22
Summary
4
1. Basis PricesSection DesignationBasis Prices - Grade S 235 JR
Category Designation SizeBasis price
€/tA 0 IPN 80 – 120 530
A 1 IPN 140 – 220 530
A 2 IPN 240 – 300 565
A 3 IPN 320 – 500 585
A 4 IPN 550 – 600 705
G 0 UPE 80 – 120 550
G 1 UPE 140 – 220 550
G 2 UPE 240 – 330 580
G 3 UPE 360 – 400 615
B 0 UPN 80 – 120 530
B 1 UPN 140 – 220 530
B 2 UPN 240 – 320 560
B 3 UPN 350 – 400 595
C 0 IPE /A 80 – 120 530
C 1 IPE /A 140 – 220 530
C 1 IPE O 180 – 220 530
C 2 IPE /A/O 240 – 300 560
C 3 IPE /A/O 330 – 400 565
C 4 IPE /A/O 450 – 500 585
C 5 IPE /A/O 550 – 600 595
C 6 IPE 750 705
D 1 HE AA/A/B/M 100 – 180 530
D 2 HE AA/A/B/M 200 – 220 560
D 3 HE AA/A/B/M 240 – 320 565
D 4 HE AA/A/B/M 340 – 400 585
D 5 HE AA/A/B/M 450 – 600 595
D 6 HE AA/A/B/M 650 – 1000 705
E 5 HTM 600 605
E 6 HTM 650 715
E 6 HL 920 344 – 656 kg/m 715
E 6 HL 1000 296 – 642 kg/m 715
E 7 HL 920 725 – 1377 kg/m 730
E 7 HL 1000 748 – 976 kg/m 730
E 7 HL 1100 730
D 3 HD 260 54 – 93 kg/m 565
E 3 HD 260 114 – 172 kg/m 575
E 3 HD 320 74 – 245 kg/m 575
E 4 HD 320 300 kg/m 595
E 4 HD 360 595
E 4 HD 400 187 – 287 kg/m 595
E 5 HD 400 314 – 382 kg/m 605
E 6 HD 400 421 – 463 kg/m 715
E 7 HD 400 509 –1299 kg/m 730
Beams and Channels Merchant Bars
Category Designation SizeBasis price
€/tAM 1 Flats Width 18 - 200 450AM 1 Angles 20 x 20 - 140 x 140 450AM 1 Angles 100 x 65 - 140 x 90 450AM 1 Rounds Diameter 10 - 110 450AM 1 Channels 40 x 20 - 65 x 42 450AM 2 Angles 150 x 150 500AM 2 Angles 150 x 75 - 150 x 100 500AM 3 Angles 160 x 160 – 200 x 200 550AM 3 Angles 200 x 100 550AM 3 Squares 45 - 160 550AM 4 Angles 250 x 90AM 4 Angles 250 x 250 570AM 4 Angles 300 x 300 570
4 5
2. Size extras
IPN UPE UPN IPE IPE A IPE O
SIZE €/t cat. €/t cat. €/t cat. €/t cat. €/t cat. €/t cat.
80 360 0 A0 385 0 G0 360 0 B0 360 0 C0 420 0 C0
100 360 0 A0 360 0 G0 360 0 B0 360 0 C0 410 0 C0
120 360 0 A0 360 0 G0 360 0 B0 360 0 C0 410 0 C0
140 340 1 A1 340 1 G1 340 1 B1 340 1 C1 390 1 C1
160 340 1 A1 340 1 G1 340 1 B1 340 1 C1 390 1 C1
180 340 1 A1 340 1 G1 340 1 B1 340 1 C1 390 1 C1 335 1 C1
200 340 1 A1 340 1 G1 340 1 B1 340 1 C1 390 1 C1 335 1 C1
220 340 1 A1 340 1 G1 340 1 B1 340 1 C1 390 1 C1 335 1 C1
240 335 3 A2 325 2 G2 325 2 B2 335 2 C2 370 2 C2 335 2 C2
260 335 3 A2 325 2 B2
270 325 2 G2 335 2 C2 370 2 C2 335 2 C2
280 335 3 A2 325 2 B2
300 335 3 A2 325 2 G2 325 2 B2 335 2 C2 370 2 C2 335 2 C2
320 350 4 A3 325 2 B2
330 325 2 G2 340 3 C3 375 3 C3 340 3 C3
340 350 4 A3
350 355 5 B3
360 350 4 A3 355 5 G3 340 3 C3 375 3 C3 340 3 C3
380 350 4 A3 355 5 B3
400 350 4 A3 355 5 G3 355 5 B3 340 3 C3 375 3 C3 340 3 C3
450 350 4 A3 345 4 C4 380 4 C4 340 4 C4
500 350 4 A3 345 4 C4 380 4 C4 340 4 C4
550 390 6 A4 390 5 C5 425 5 C5 390 5 C5
600 390 6 A4 390 5 C5 425 5 C5 390 5 C5
750x147 395 6 C6
750 TM 390 6 C6
Beams and Channels IPN - UPE - UPN - IPE - IPE A- IPE O
6
HE/HL AA HE/HL A HE/HL B HE M HL M HE/HL TMHL 920
(787-1377 kg/m)HL 1000
(748-976 kg/m)
SIZE €/t cat. €/t cat. €/t cat. €/t cat. €/t cat. €/t cat. €/t cat.
100 400 1 D1 350 1 D1 340 1 D1 355 1 D1
120 400 1 D1 350 1 D1 340 1 D1 355 1 D1
140 400 1 D1 350 1 D1 340 1 D1 355 1 D1
160 400 1 D1 350 1 D1 340 1 D1 355 1 D1
180 400 1 D1 350 1 D1 340 1 D1 355 1 D1
200 395 2 D2 345 2 D2 335 2 D2 350 2 D2
220 395 2 D2 345 2 D2 335 2D2 350 2D2
240 395 3 D3 350 3 D3 335 3 D3 355 3 D3
260 395 3 D3 350 3 D3 335 3 D3 355 3 D3
280 395 3 D3 350 3 D3 335 3 D3 355 3 D3
300 395 3 D3 350 3 D3 335 3 D3 355 3 D3
320 395 3 D3 350 3 D3 335 3 D3 355 3 D3
340 405 4 D4 360 4 D4 345 4 D4 365 4 D4
360 405 4 D4 360 4 D4 345 4 D4 365 4 D4
400 405 4 D4 360 4 D4 345 4 D4 365 4 D4
450 440 5 D5 395 5 D5 380 5 D5 400 5 D5
500 440 5 D5 395 5 D5 380 5 D5 400 5 D5
550 440 5 D5 395 5 D5 380 5 D5 400 5 D5
600 440 5 D5 395 5 D5 380 5 D5 400 5 D5 405 5 E5
650 435 6 D6 390 6 D6 375 6 D6 395 6 D6 400 6 E6
700 435 6 D6 390 6 D6 375 6 D6 395 6 D6 400 6 E6
800 435 6 D6 390 6 D6 375 6 D6 395 6 D6 400 6 E6
900 435 6 D6 390 6 D6 375 6 D6 395 6 D6 400 6 E6
920 400 6 E6 410 7 E7
1000 435 6 D6 390 6 D6 375 6 D6 395 6 D6 385 6 E6 400 6 E6 410 7 E7
1100 410 7 E7 410 7 E7 410 7 E7 410 7 E7
Beams and ChannelsHE/HL AA - HE/HL A - HE/HL B - HE M - HL M- HE/HL TM - HL 920/1000
6 7
Beams and ChannelsHD - HP
HD 260 x cat. €/t54,1 3 D3 345
68,2 3 D3 345
93 3 D3 345
114 3 E3 340
142 3 E3 340
172 3 E3 340
HD 320 x cat. €/t74,2 3 E3 350
97,6 3 E3 350
127 3 E3 345
158 3 E3 345
198 3 E3 345
245 3 E3 345
300 4 E4 355
HD 360 x cat. €/t134 4 E4 365
147 4 E4 365
162 4 E4 360
179 4 E4 360
196 4 E4 360
HD 400 x cat. €/t187 4 E4 360
216 4 E4 360
237 4 E4 360
262 4 E4 360
287 4 E4 360
314 5 E5 375
347 5 E5 375
382 5 E5 375
421 6 E6 375
463 6 E6 375
509 7 E7 405
551 7 E7 405
592 7 E7 405
634 7 E7 405
677 7 E7 405
744 7 E7 405
818 7 E7 405
900 7 E7 405
990 7 E7 405
1086 7 E7 405
1202 7 E7 405
1299 7 E7 405
HP 200 x cat. €/t43 2 E2 340
53 2 E2 340
HP 220 x cat. €/t57 2 E2 340
HP 260 x cat. €/t75 3 E3 345
87 3 E3 345
HP 305 x cat. €/t79 4 E4 360
88 4 E4 360
95 4 E4 360
110 4 E4 360
126 4 E4 360
149 4 E4 355
180 4 E4 355
186 4 E4 355
223 4 E4 355
HP 320 x cat. €/t88 4 E4 360
103 4 E4 360
117 4 E4 355
147 4 E4 355
184 4 E4 355
HP 360 x cat. €/t109 4 E4 365
133 4 E4 360
152 4 E4 360
174 4 E4 360
180 4 E4 360
HP 400 x cat. €/t122 4 E4 360
140 4 E4 360
158 4 E4 360
176 4 E4 360
194 4 E4 360
212 4 E4 360
231 4 E4 360
8
Merchant bars
Flats
Width x Thickness (mm)
size extra €/t
Cat
18x6 490 AM1
20x4 480 AM1
20x5 465 AM1
20x6 460 AM1
20x6,5 460 AM1
20x7 460 AM1
20x8 460 AM1
20x9 460 AM1
20x10 460 AM1
20x12 460 AM1
20x13 460 AM1
20x14 460 AM1
20x15 460 AM1
22x5 460 AM1
22x6 460 AM1
22x6,5 460 AM1
22x7 460 AM1
22x8 460 AM1
22x10 460 AM1
22x11 460 AM1
22x12 460 AM1
22x13 460 AM1
22x14 460 AM1
22x15 460 AM1
25x4 475 AM1
25x5 460 AM1
25x6 460 AM1
25x7 460 AM1
25x8 460 AM1
25x10 460 AM1
25x12 460 AM1
25x13 460 AM1
25x14 460 AM1
25x15 460 AM1
25x16 460 AM1
25x18 460 AM1
26x6 460 AM1
26x6,5 460 AM1
26x7 460 AM1
26x8 460 AM1
Width x Thickness (mm)
size extra €/t
Cat
26x10 460 AM1
26x12 460 AM1
26x13 460 AM1
26x14 460 AM1
26x15 460 AM1
26x16 460 AM1
26x18 460 AM1
28x5 460 AM1
28x6 460 AM1
28x6,5 460 AM1
28x7 460 AM1
28x8 460 AM1
28x10 460 AM1
28x12 460 AM1
28x13 460 AM1
28x14 460 AM1
28x16 460 AM1
28x18 460 AM1
30x4 485 AM1
30x5 445 AM1
30x6 410 AM1
30x6,5 460 AM1
30x7 470 AM1
30x8 420 AM1
30x9 420 AM1
30x10 420 AM1
30x12 420 AM1
30x13 420 AM1
30x14 420 AM1
30x15 420 AM1
30x16 420 AM1
30x18 420 AM1
30x20 420 AM1
32x5 430 AM1
32x6 420 AM1
32x6,5 420 AM1
32x7 450 AM1
32x8 420 AM1
32x10 420 AM1
32x12 420 AM1
Width x Thickness (mm)
size extra €/t
Cat
32x13 420 AM1
32x14 420 AM1
32x15 420 AM1
32x16 420 AM1
32x18 420 AM1
32x20 420 AM1
35x4 480 AM1
35x5 430 AM1
35x6 430 AM1
35x6,5 420 AM1
35x7 420 AM1
35x8 400 AM1
35x10 400 AM1
35x12 400 AM1
35x13 400 AM1
35x14 400 AM1
35x15 400 AM1
35x16 400 AM1
35x18 400 AM1
35x20 400 AM1
35x22 400 AM1
35x25 430 AM1
38x5 430 AM1
38x6 430 AM1
38x6,5 430 AM1
38x8 430 AM1
38x10 430 AM1
38x12 430 AM1
38x13 430 AM1
38x14 430 AM1
38x15 430 AM1
38x16 430 AM1
38x20 430 AM1
38x22 430 AM1
38x25 430 AM1
40x4 470 AM1
40x5 430 AM1
40x6 400 AM1
40x6,5 400 AM1
40x7 450 AM1
8 9
Width x Thickness (mm)
size extra €/t
Cat
40x8 400 AM1
40x9 400 AM1
40x10 400 AM1
40x12 400 AM1
40x13 400 AM1
40x14 400 AM1
40x15 400 AM1
40x16 400 AM1
40x18 400 AM1
40x20 400 AM1
40x22 400 AM1
40x25 400 AM1
40x30 410 AM1
45x4 470 AM1
45x5 430 AM1
45x6 400 AM1
45x6,5 400 AM1
45x7 400 AM1
45x8 400 AM1
45x9 400 AM1
45x10 400 AM1
45x12 400 AM1
45x13 400 AM1
45x14 400 AM1
45x15 400 AM1
45x16 400 AM1
45x18 400 AM1
45x20 405 AM1
45x22 405 AM1
45x25 435 AM1
45x30 445 AM1
50x4 440 AM1
50x5 430 AM1
50x6 400 AM1
50x6,5 400 AM1
50x7 400 AM1
50x8 400 AM1
50x9 400 AM1
50x10 400 AM1
50x12 400 AM1
Width x Thickness (mm)
size extra €/t
Cat
50x13 400 AM1
50x14 450 AM1
50x15 400 AM1
50x16 450 AM1
50x18 400 AM1
50x20 400 AM1
50x22 400 AM1
50x25 400 AM1
50x30 410 AM1
50x35 410 AM1
55x5 420 AM1
55x6 420 AM1
55x6,5 420 AM1
55x7 420 AM1
55x8 420 AM1
55x10 420 AM1
55x12 420 AM1
55x13 420 AM1
55x14 420 AM1
55x15 420 AM1
55x16 420 AM1
55x18 420 AM1
55x20 420 AM1
55x22 420 AM1
55x25 420 AM1
55x30 420 AM1
55x35 420 AM1
60x4 440 AM1
60x5 430 AM1
60x6 400 AM1
60x6,5 400 AM1
60x7 400 AM1
60x8 400 AM1
60x9 400 AM1
60x10 400 AM1
60x12 400 AM1
60x13 400 AM1
60x14 450 AM1
60x15 400 AM1
60x16 400 AM1
Width x Thickness (mm)
size extra €/t
Cat
60x18 400 AM1
60x20 400 AM1
60x22 400 AM1
60x25 400 AM1
60x30 410 AM1
60x35 440 AM1
60x40 440 AM1
60x45 440 AM1
63x5 420 AM1
63x6 420 AM1
63x8 420 AM1
63x10 420 AM1
63x12 420 AM1
65x5 440 AM1
65x6 430 AM1
65x6,5 420 AM1
65x7 430 AM1
65x8 430 AM1
65x9 430 AM1
65x10 440 AM1
65x12 440 AM1
65x13 440 AM1
65x14 440 AM1
65x15 440 AM1
65x16 440 AM1
65x18 440 AM1
65x20 440 AM1
65x22 440 AM1
65x25 440 AM1
65x30 440 AM1
65x35 440 AM1
65x40 440 AM1
65x45 440 AM1
70x5 430 AM1
70x6 400 AM1
70x6,5 400 AM1
70x7 400 AM1
70x8 400 AM1
70x10 400 AM1
70x12 400 AM1
Merchant bars
Flats
10
Width x Thickness (mm)
size extra €/t
Cat
70x13 400 AM1
70x14 400 AM1
70x15 400 AM1
70x16 400 AM1
70x18 400 AM1
70x20 400 AM1
70x22 400 AM1
70x25 440 AM1
70x30 420 AM1
70x35 440 AM1
70x40 440 AM1
70x45 440 AM1
70x50 440 AM1
75x5 440 AM1
75x6 430 AM1
75x6,5 430 AM1
75x8 430 AM1
75x9 430 AM1
75x10 440 AM1
75x12 440 AM1
75x13 440 AM1
75x15 440 AM1
75x16 440 AM1
75x20 440 AM1
75x25 440 AM1
75x30 440 AM1
75x35 440 AM1
75x40 460 AM1
80x5 410 AM1
80x6 400 AM1
80x6,5 400 AM1
80x7 400 AM1
80x8 400 AM1
80x9 400 AM1
80x10 400 AM1
80x11 400 AM1
80x12 400 AM1
80x13 400 AM1
80x14 400 AM1
80x15 400 AM1
Width x Thickness (mm)
size extra €/t
Cat
80x16 400 AM1
80x18 400 AM1
80x20 400 AM1
80x22 400 AM1
80x25 400 AM1
80x30 410 AM1
80x35 440 AM1
80x40 440 AM1
80x45 440 AM1
80x50 455 AM1
90x5 450 AM1
90x6 400 AM1
90x6,5 400 AM1
90x7 400 AM1
90x8 400 AM1
90x9 400 AM1
90x10 400 AM1
90x11 400 AM1
90x12 400 AM1
90x13 400 AM1
90x14 400 AM1
90x15 400 AM1
90x16 400 AM1
90x18 400 AM1
90x20 400 AM1
90x22 400 AM1
90x25 400 AM1
90x30 410 AM1
90x35 410 AM1
90x40 440 AM1
90x45 440 AM1
90x50 455 AM1
95x35 440 AM1
100x5 410 AM1
100x6 400 AM1
100x6,5 400 AM1
100x7 400 AM1
100x8 400 AM1
100x9 400 AM1
100x10 400 AM1
Width x Thickness (mm)
size extra €/t
Cat
100x11 400 AM1
100x12 400 AM1
100x13 400 AM1
100x14 400 AM1
100x15 400 AM1
100x16 400 AM1
100x16,5 400 AM1
100x18 400 AM1
100x20 400 AM1
100x22 400 AM1
100x25 400 AM1
100x30 410 AM1
100x35 440 AM1
100x40 440 AM1
100x45 440 AM1
100x50 440 AM1
105x16 440 AM1
105x35 440 AM1
105x40 440 AM1
110x5 450 AM1
110x6 400 AM1
110x7 400 AM1
110x8 400 AM1
110x9 400 AM1
110x10 400 AM1
110x11 400 AM1
110x12 400 AM1
110x13 400 AM1
110x14 400 AM1
110x15 400 AM1
110x16 400 AM1
110x18 400 AM1
110x20 400 AM1
110x22 400 AM1
110x25 400 AM1
110x30 410 AM1
110x35 440 AM1
110x40 440 AM1
120x5 410 AM1
120x6 400 AM1
Merchant bars
Flats
10 11
Width x Thickness (mm)
size extra €/t
Cat
120x7 400 AM1
120x8 400 AM1
120x9 400 AM1
120x10 400 AM1
120x12 400 AM1
120x15 400 AM1
120x16 400 AM1
120x20 400 AM1
120x25 400 AM1
120x30 420 AM1
130x8 400 AM1
130x9 400 AM1
130x10 400 AM1
130x11 400 AM1
130x12 400 AM1
130x13 400 AM1
130x14 400 AM1
130x15 400 AM1
130x16 400 AM1
130x18 400 AM1
130x20 400 AM1
130x22 400 AM1
130x25 400 AM1
130x30 410 AM1
130x35 440 AM1
130x40 440 AM1
130x45 455 AM1
130x50 455 AM1
130x60 465 AM1
140x8 410 AM1
140x9 410 AM1
140x10 410 AM1
140x11 410 AM1
140x12 410 AM1
140x13 410 AM1
140x14 410 AM1
140x15 410 AM1
140x16 410 AM1
140x18 410 AM1
140x20 410 AM1
Width x Thickness (mm)
size extra €/t
Cat
140x22 410 AM1
140x25 410 AM1
140x30 420 AM1
140x35 440 AM1
140x40 440 AM1
140x45 455 AM1
140x50 455 AM1
140x60 465 AM1
150x8 410 AM1
150x9 410 AM1
150x10 410 AM1
150x11 410 AM1
150x12 410 AM1
150x13 410 AM1
150x14 410 AM1
150x15 410 AM1
150x16 410 AM1
150x18 410 AM1
150x20 410 AM1
150x22 410 AM1
150x25 410 AM1
150x30 420 AM1
150x35 440 AM1
150x40 440 AM1
150x45 455 AM1
150x50 455 AM1
150x60 465 AM1
160x8 410 AM1
160x9 410 AM1
160x10 410 AM1
160x11 410 AM1
160x12 410 AM1
160x13 410 AM1
160x14 410 AM1
160x15 410 AM1
160x16 410 AM1
160x18 410 AM1
160x20 410 AM1
160x22 410 AM1
160x25 410 AM1
Width x Thickness (mm)
size extra €/t
Cat
160x30 420 AM1
160x35 440 AM1
160x40 460 AM1
160x45 470 AM1
160x50 470 AM1
160x60 470 AM1
170x8 460 AM1
170x9 460 AM1
170x10 460 AM1
170x11 460 AM1
170x12 460 AM1
170x13 460 AM1
170x14 460 AM1
170x15 460 AM1
170x16 460 AM1
170x18 460 AM1
170x20 460 AM1
170x22 460 AM1
170x25 460 AM1
170x30 460 AM1
170x35 460 AM1
170x40 460 AM1
170x45 470 AM1
170x50 470 AM1
170x60 470 AM1
180x8 410 AM1
180x10 410 AM1
180x12 410 AM1
180x15 410 AM1
180x20 410 AM1
180x25 410 AM1
200x8 410 AM1
200x10 410 AM1
200x12 410 AM1
200x15 410 AM1
200x20 410 AM1
200x25 410 AM1
Merchant bars
Flats
12
Merchant bars
Equal angles
Dimension (mm)
Size extra€/t
Cat.
20x20x3 470 AM1
25x25x2,5 470 AM1
25x25x3 470 AM1
25x25x4 470 AM1
25x25x5 440 AM1
30x30x2,7 440 AM1
30x30x3 440 AM1
30x30x4 440 AM1
30x30x5 440 AM1
35x35x3 470 AM1
35x35x3,5 440 AM1
35x35x4 440 AM1
35x35x5 440 AM1
40x40x3 430 AM1
40x40x3,5 430 AM1
40x40x4 410 AM1
40x40x5 410 AM1
40x40x6 430 AM1
45x45x3 430 AM1
45x45x4 430 AM1
45x45x4,5 410 AM1
45x45x5 410 AM1
45x45x6 410 AM1
45x45x7 410 AM1
50x50x3 430 AM1
50x50x4 410 AM1
50x50x5 410 AM1
50x50x6 410 AM1
50x50x7 410 AM1
50x50x8 430 AM1
50x50x9 430 AM1
55x55x4 410 AM1
55x55x4,5 410 AM1
55x55x5 410 AM1
55x55x6 440 AM1
60x60x4 430 AM1
60x60x5 410 AM1
60x60x6 410 AM1
Dimension (mm)
Size extra€/t
Cat.
60x60x7 410 AM1
60x60x8 410 AM1
65x65x4 440 AM1
65x65x5 440 AM1
65x65x6 440 AM1
65x65x7 440 AM1
65x65x8 440 AM1
65x65x9 470 AM1
70x70x5 410 AM1
70x70x6 410 AM1
70x70x7 410 AM1
70x70x8 410 AM1
70x70x9 410 AM1
75x75x4 410 AM1
75x75x5 410 AM1
75x75x6 440 AM1
75x75x7 440 AM1
75x75x8 440 AM1
75x75x9 440 AM1
75x75x10 440 AM1
80x80x5 410 AM1
80x80x6 410 AM1
80x80x7 410 AM1
80x80x8 410 AM1
80x80x9 410 AM1
80x80x10 410 AM1
90x90x5 430 AM1
90x90x6 430 AM1
90x90x7 430 AM1
90x90x8 410 AM1
90x90x9 410 AM1
90x90x10 410 AM1
90x90x11 410 AM1
100x100x6 410 AM1
100x100x7 430 AM1
100x100x8 410 AM1
100x100x9 410 AM1
100x100x10 410 AM1
Dimension (mm)
Size extra€/t
Cat.
100x100x12 410 AM1
100x100x14 410 AM1
110x110x8 410 AM1
110x110x10 410 AM1
110x110x12 410 AM1
120x120x8 410 AM1
120x120x9 410 AM1
120x120x10 410 AM1
120x120x11 440 AM1
120x120x12 410 AM1
120x120x13 410 AM1
120x120x15 440 AM1
130x130x10 410 AM1
130x130x11 410 AM1
130x130x12 410 AM1
130x130x13 410 AM1
130x130x14 410 AM1
130x130x16 410 AM1
140x140x9 410 AM1
140x140x10 410 AM1
140x140x11 410 AM1
140x140x12 410 AM1
140x140x13 410 AM1
140x140x14 410 AM1
140x140x15 410 AM1
140x140x16 410 AM1
150x150x10 410 AM2
150x150x12 410 AM2
150x150x13 410 AM2
150x150x14 410 AM2
150x150x15 410 AM2
150x150x16 410 AM2
150x150x18 410 AM3
150x150x20 440 AM3
160x160x14 420 AM3
160x160x15 420 AM3
160x160x16 420 AM3
160x160x17 420 AM3
12 13
Dimension (mm)
Size extra€/t
Cat.
180x180x13 420 AM3
180x180x14 420 AM3
180x180x15 420 AM3
180x180x16 420 AM3
180x180x17 420 AM3
180x180x18 420 AM3
180x180x19 420 AM3
180x180x20 420 AM3
200x200x13 420 AM3
200x200x15 420 AM3
200x200x16 420 AM3
200x200x17 420 AM3
200x200x18 420 AM3
200x200x19 420 AM3
200x200x20 420 AM3
200x200x21 420 AM3
200x200x22 420 AM3
200x200x23 420 AM3
Dimension (mm)
Size extra€/t
Cat.
200x200x24 420 AM3
200x200x25 420 AM3
200x200x26 420 AM3
200x200x28 420 AM3
250x250x18 440 AM4
250x250x19 440 AM4
250x250x20 440 AM4
250x250x21 440 AM4
250x250x22 440 AM4
250x250x23 440 AM4
250x250x24 440 AM4
250x250x25 440 AM4
250x250x26 440 AM4
250x250x27 440 AM4
250x250x28 440 AM4
250x250x29 440 AM4
250x250x30 440 AM4
250x250x31 440 AM4
Dimension (mm)
Size extra€/t
Cat.
250x250x32 440 AM4
250x250x33 440 AM4
250x250x34 440 AM4
250x250x35 440 AM4
300x300x25 460 AM4
300x300x26 460 AM4
300x300x27 460 AM4
300x300x28 460 AM4
300x300x29 460 AM4
300x300x30 460 AM4
300x300x31 460 AM4
300x300x32 460 AM4
300x300x33 460 AM4
300x300x34 460 AM4
300x300x35 460 AM4
Merchant bars
Equal angles - Unequal angles
Unequal angles
Equal angles
Dimension (mm)
size extra€/t
Cat.
100x65x7 470 AM1
100x65x8 470 AM1
100x65x9 470 AM1
100x65x10 450 AM1
100x65x12 450 AM1
110x70x10 450 AM1
110x70x12 450 AM1
120x80x8 450 AM1
120x80x10 450 AM1
120x80x12 450 AM1
130x90x10 450 AM1
Dimension (mm)
size extra€/t
Cat.
130x90x12 450 AM1
130x90x14 450 AM1
140x90x8 450 AM1
140x90x10 450 AM1
140x90x12 450 AM1
140x90x14 450 AM1
150x90x10 470 AM2
150x90x11 470 AM2
150x90x12 470 AM2
150x100x10 450 AM2
150x100x12 450 AM2
Dimension (mm)
size extra€/t
Cat.
150x100x14 450 AM2
200x100x10 470 AM3
200x100x12 470 AM3
200x100x14 470 AM3
200x100x15 470 AM3
200x100x16 470 AM3
250x90x10 480 AM4
250x90x12 480 AM4
250x90x16 480 AM4
14
Merchant bars
Rounds* - Square* - Channel*
RoundsDimension
(mm)Size extra
€/tCat.
10 460 AM1
12 460 AM1
14 420 AM1
16 410 AM1
18 410 AM1
20 410 AM1
22 410 AM1
24 410 AM1
25 410 AM1
26 410 AM1
27 410 AM1
28 410 AM1
29 410 AM1
30 410 AM1
31 410 AM1
32 440 AM1
34 410 AM1
35 440 AM1
36 410 AM1
37 410 AM1
38 410 AM1
40 410 AM1
42 410 AM1
44 410 AM1
45 410 AM1
46 410 AM1
47 410 AM1
48 410 AM1
50 410 AM1
51 410 AM1
52 410 AM1
53 410 AM1
54 410 AM1
55 410 AM1
56 410 AM1
57 410 AM1
58 410 AM1
Dimension (mm)
Size extra €/t
Cat.
60 420 AM1
62 420 AM1
63 420 AM1
65 420 AM1
70 420 AM1
75 420 AM1
80 420 AM1
85 420 AM1
90 420 AM1
95 420 AM1
100 420 AM1
105 430 AM1
110 430 AM1
Squares
ChannelsDimension
(mm)size extra
€/tCat.
U 40x20x4 450 AM1
U 40x20x5 410 AM1
U 50x25x5 410 AM1
U50x38x5 410 AM1
U 60x30x6 410 AM1
U 65x42x5.5 420 AM1
Dimension (mm)
Size extra€/t
Cat.
45 410 AM1
50 410 AM1
55 410 AM1
60 420 AM1
90 450 AM3
100 460 AM3
110 460 AM3
120 460 AM3
130 460 AM3
140 500 AM3
150 500 AM3
160 500 AM3
*other dimensions upon request
14 15
3. Grades and qualities
3.1. Structural steelsStandard Previous standards Extra
EN10025-2:2004 EN 10025:1990 NFA 35-501 DIN 17 100NBN A21 101UNE 36 080
€/t
S235JR S 235 JRG2 RSt 37-2 AE 235 B-FN BASIS
S235J0 S 235 J0 E 24-3 St 37-3 U AE 235 C BASIS
S235J2* S 235 J2G3/G4 20
S275JR S 275 JR E 28-2 St 44-2 AE 255-B BASIS
S275J0 S 275 J0 E 28-3 St 44-3 U AE 255-C BASIS
S275J2* S 275 J2G3/G4 20
S355JR S 355 JR E 36-2 AE 355-B 35
S355J0 S 355 J0 E 36-3 St 52-3 U AE 355-C 40
S355J2 S 355 J2G3/G4 St 52-3 N AE 355-D 50
S355K2 S 355 K2G3/G4 E 36-4 AE 355-DD 60
S450J0 80
E295* E 295 A 50-2 St 50-2 A 490-2 *
E335* E 335 A 60-2 St 60-2 A 590-2 *
E360* E 360 A 70-2 St 70-2 A 690-2 *
3.2. Weldable fine grain structural steelsStandard Previous standards Extra
EN 10025-4:2004NFA 35-504NFA 36-201
DIN 17 102 €/t
S275M *
S355M E 355 St E 355 60
S355ML TSt E 355 90
S460M E 460 R St E 460 100
S460ML E 460 FP TSt E 460 125
3.3. Case hardening steels – non alloy special steels*Standard
EN 10084:1998Extra€/t
special steel
C10E 30
C10R 30
C15E 35
C15R 35
*upon agreement
16
3.4. Steel for quenching and tempering – non alloy quality steels and non alloy special steels*
StandardEN 10083-2:2006
Extra€/t
quality steel
C35 40
C45 50
C55 60
C60 65
special steel
C35E 40
C35R 40
C45E 50
C45R 50
C55E 60
C55R 60
C60E 65
C60R 65
3.5. HISTAR® and FRITENAR® Trademark steelsDesignation Yield strength
Minimum absorbed energy
TemperatureExtra€/t
Histar 355 355 MPa 40 J - 20 °C 60
Histar 355 L 355 MPa 27 J - 50 °C 90
Histar 460 460/(450) MPa 40 J - 20 °C 100
Histar 460 L 460 MPa 27 J - 50 °C 125
Fritenar 355 355/(345) MPa 41 J - 20 °C 60
3.6. Weldable structural steels for fixed offshore structuresStandard
EN 10225:2009Yield strength
Minimum absorbed energy
TemperatureExtra€/t
S355G1 355/(345) MPa 50J - 20 °C *
S355G4+M 355/(345) MPa 50J - 20 °C *
S355G11+M 355/(345) MPa 50J - 40 °C *
S355G12+M 355/(345) MPa 50J - 40 °C *
S460G3+M 460/(440) MPa 60J - 40 °C *
S460G4+M 460/(440) MPa 60J - 40 °C *
*upon agreement
16 17
3.7. HISTAR® and FRITENAR® Trademark steels for offshore applications
Designaton Yield strengthMinimum
absorbed energyTemperature
Extra€/t
Histar 355 TZ OS 355 MPa 50 J - 20 °C 90
Histar 355 TZK OS 355 MPa 50 J - 40 °C 125
Histar 460 TZ OS 460 MPa 60 J - 20 °C 140
Histar 460 TZK OS 460 MPa 60 J - 40 °C 160
Fritenar 355 OS 355/(345) MPa 50 J - 20 °C 90
Fritenar 355 TZK OS 355/(345) MPa 50 J - 40 °C 125
3.8. Weathering steelsSTANDARD EN
10025-5Yield strength
Minimum absorbed energy
TemperatureExtra€/t
S355J0W 355 (345) Mpa 27J 0°C 120
S355J2W 355 (345) Mpa 27J -20°C 130
S355K2W 355 (345) Mpa 40J -20°C 140
3.9. Steels with specific properties at high temperatureDesignation Yield strength
Minimum absorbed energy
Temperature Extra€/t
16Mo3° 275 31J +20°C *
3.10. Special requirementsThe requirement “Suitability for hot dip zinc coating” is limited to 0,14% ≤ Si ≤ 0,25% and P ≤ 0,035% [EN 10025-2,4:2004; option 5 and chapter 7.4.3 - table 1 - class 3] for the capability of forming a zinc layer during hot-dip galvanising.
BASIS
Delivery in accordance with class 1 *The material is delivered in standard ex-mill condition with surface quality in accordance with EN 10163-3 : 1991, class c, subclass 1.
*
Others *
*upon agreement
° 16Mo3 in relation with EN 10273, tensile properties to EN 10028, other requirements per EN 10025
18
4. Lengths
4.1. Sections
4.1.1. Standard lengths: 9,0m ≤ L ≤ 15,1mStandard length steps XX,000m ; XX,100m ; XX,600m BASISOther lengths in steps of 100mm 10 €/t
4.1.2. Short lengths* (out of rolling)6,0 m ≤ L < 9,0 m 15 €/t
L < 6.0m upon agreement
4.1.3. Long lengths* Rail
€/tTruck
€/t
15,1m < L ≤ 18,1m 0 2018,1m < L ≤ 22,1m 10 2522,1m < L ≤ 24,1m 20 3024,1m < L upon agreement
Plus: standard freight costs, special authorisations, escort costs.* Short lengths and long lengths are subject to special agreement.
4.2. Merchant bars
4.2.1. Standard lengths: 6,0m ≤ L ≤ 12,1mStandard length steps XX,000m ; XX,100m ; XX,600m BASISOther lengths in steps of 100mm 10 €/t
4.2.2. Short lengths (out of rolling)L < 6.0m upon agreement
4.2.3. Long lengthsL > 12.1m upon agreement
4.3. Length tolerancesStandard - 0 / +100 mm BASISOther upon agreement
18 19
5. Mill test certificates - Inspections
5.1. Mill test certificates
5.1.1. Test certificate according to EN 10204 : 2004 / 2.2
Chemical analysis and mechanical properties BASIS
5.1.2. Mill’s inspection certificate or report of inspection at the mill by buyer’s agent according to
EN 10204 : 2004 3.1 10 €/tEN 10204 : 2004 3.2 20 €/t
5.2. Additional tests
Additional tests to standard are submitted to the following extras :
Charpy V notch bar impact test, per set of 3 test pieces at room-temperature
3 €/t
Idem, aged 5 €/tCharpy V notch bar impact test, per set of 3 pieces at low temperature 5 €/tIdem, aged 5 €/tTensile test 3 €/tTrough thickness tensile test 10 €/tTensile test on welded joint 25 €/tBending test 3 €/tProduct analysis 3 €/tBending test on welded joint 25 €/tHot tensile test upon agreementNon mentioned tests upon agreement
5.3. Inspection Authorities’ Fees
Fees and travelling expenses of the Inspecting Authority will be charged in full to the buyer.
20
6. Finishing
6.1. GeneralThe charging for account will be done gross and net for all types of packing, without any discount for packaging. A taking back of packaging material and square timber is excluded.
6.2. MarkingStandard marking by coded labels. All sections are provided with a standard label
One label per lift or one label per bar (if delivery for heavy sections in loose bars) BASISMarking by diestamping (orders with inspection 3.2 excluded) €/t 10
Marking is carried out by affixing mill’s standard label. The affixing of one label per bar (for material delivered unbundled) or of one label per bundle at one end of the bar/bundle does not carry a price extra.Diestamping includes marking of
- heat number, quality (if requested)- producers’ identification mark- customers’ or inspectors’ identification mark
6.3. CranebundlingBundling according to mill standard BASISSpecial bundling instructions regarding weight or size upon agreement
6.4. StraighteningDouble straightening or straightening with reduced tolerances upon agreement
6.5. Carriage by truckEx works collection of the goods by the customer upon agreement
6.6. Covering of the semi-trailers and the wagons
Covering of the semi-trailers and the wagons only after prior acceptance by the mill and renting costs for canvas covers and awningsare for customer’s account
upon agreement
20 21
7. Quantities
7.1. Definition of one order item
One order item is a lot of beams or channels or merchant bars to be produced at one single production site and to be delivered to one single destination, in a multiple of a shipping quantity.
One rolling item is part of an order item, and in addition restricted to only one section and size, one grade, one thickness and one length. Quantities of less than 5 tons per rolling item are not accepted.
The tonnage per order item (as defined above) at the time of booking will determine the extra that will be charged, even if the delivery is split into several dispatches at mill’s convenience.
In the case of a partial cancellation of one order item, the extra for the remaining tonnage will be charged.
7.2. Extras for quantities(on ordered theoretical weight)
10 t ≤tons per order item < 20t €/t 10tons per order item ≥ 20 t BASIS
7.3. Deviations of the total ordered weight
5 t <tons per rolling item < 20 t +/- 15%20 t ≤ tons per rolling item < 40 t +/- 10%40 t ≤ tons per rolling item +/- 6%
Specific instructions limiting above tolerances (for example: prescription of an exact number of bars)will carry an extra of €/t 20
22
8. Miscellaneous
8.1. Storage costs
If, due to late call off by the customer, material remains in the mill for more than 15 working days, a monthly storage fee of €/t 20 will be charged (due per month cut).
22 23
9. Agencies
European headquarters
LUXEMBOURGArcelorMittal Commercial Sections S.A.66, route de LuxembourgL-4221 Esch-sur-AlzetteLuxembourgTel. : + 352 5313 3010Fax: + 352 5313 [email protected]
SPAINArcelorMittal Comercial Perfiles Espana S.L.Ctr. Toledo, Km. 9,200E-28021 MadridSpainTel. : +34 91 797 23 00Fax: +34 91 505 02 [email protected]
Sales agencies
AUSTRIAArcelorMittal Commercial Sections Austria GmbHVogelweiderstrase 66A-5020 SalzburgAustriaTel. : +43 662 88 67 44Fax: +43 662 88 67 44 [email protected]
BELGIUM - THE NETHERLANDSArcelorMittal Commercial Sections Benelux B.V.Eemhavenweg 70Postbus 55052NL - 3008 EB RotterdamThe NetherlandsTel. : +31 10 487 03 44 (direct)Fax: +31 10 487 03 [email protected]
BOSNIA HERZEGOVINAArcelorMittal ZenicaBulevar Kralja Tvrtka, no. 1772000 ZenicaBosnia HerzegovinaTel. : +384 32 467 268Fax: +384 32 467 065
BULGARIAArcelorMittal Commercial Long Bulgaria2, Nikolay Hayton, ent C, apt C61113 SofiaBulgariaTel. : +359 287 09 028Fax: +359 287 05 [email protected]
CZECH REPUBLICArcelorMittal Commercial Long Czech s.r.o.Vratimovska 689CZ-70702 Ostrava KunciceCzech RepublicTel. : +420 59 568 6040Fax. : +420 59 568 [email protected]
DENMARKArcelorMittal Commercial Long Denmark A/SIslands Brygge, 43DK-2300 CopenhagenDenmarkTel. : +45 33 74 17 11Fax: +45 33 13 10 [email protected]
ESTONIAArcelorMittal Commercial BalticsTatari 610116 TalinEstoniaTel. : +372 64 14 338Fax: +372 64 14 [email protected]
FINLANDArcelorMittal Commercial Long Finland OYVyökatu 9-B25FIN-00160 HelsinkiFinlandTel. : +358 9 74 222 [email protected]
FRANCEArcelorMittal Commercial Sections France S.A.6, rue André CampraF-93212 La Plaine Saint-Denis CedexFranceTel. : +33 1 71 92 00 00Fax: +33 1 71 92 17 [email protected]
Domaine de Pelus4, rue Graham BellF-33700 MerignacFranceTel. : +33 5 57 92 09 10Fax: +33 5 57 92 61 [email protected]
GERMANYArcelorMittal Commercial Sections DeutschlandGmbHSubbelrather Straße 13P.O. box 10 12 04D-50452 KölnGermanyTel. : +49 221 572 90Fax: +49 221 572 92 [email protected]
Augustenstraße 7D-70178 StuttgartGermanyTel. : +49 711 489800Fax: +49 711 48980163 [email protected]
GREECE AND CYPRUSArcelorMittal Commercial FCSE Greece Ltd. Zeppou 51GR 16675 Glyfada AthensGreeceTel. : +30 210 960 42 79Fax: +30 210 965 25 [email protected]
ICELANDGudmundur Arason EHFSkútuvogur 4IS 104 ReykjavikIcelandTel. : +354 568 68 44Fax: +354 568 05 [email protected]
ITALYArcelorMittal Commercial Sections Italia S.r.l.Strada Torino 43 c/oEuropalace CenterI-10043 Orbassano (TO)ItalyTel. : +39 011 906 3931Fax: +39 011 903 [email protected]
24
NORWAYArcelorMittal Commercial Long Norway A/SHolmenveien 20,N-0374 OsloNorwayTel. : +47 22 83 78 [email protected]
POLANDArcelorMittal Commercial Long Polskaul. J. Pilsudskiego 92PL-41308 Dabrowa GorniczaPolandTel. : +48 32 776 67 27Fax: +48 32 776 70 [email protected]
ROMANIAArcelorMittal Long Romania S.R.L.7 9 Intrarea Tudor Stefan2nd floor, AP. 4Sector 1, 011 655 BucharestRomaniaTel. : +40 31 405 47 93Fax: +40 21 231 71 [email protected]
SWEDENArcelor Commercial Long Sweden A.B.Birger Jarlsgatan 41 AS-111 45 StockholmSwedenTel. : +46 8 534 80 94 0Fax: +46 8 611 61 [email protected]
SWITZERLANDArcelorMittal Commercial Sections Schweiz AGInnere Margarethenstraße 7CH-4051 BaselSwitzerlandTel. : +41 61 227 77 77Fax: +41 61 227 77 [email protected]
TURKEYArcelorMittal CL Celik Des Ticaret A.S.Nispetiye Caddesi NO: 22,Ozden Is Merkezi Kat 2Levent 34330 IstanbulTurkeyTel. : +90 212 317 49 80Fax: +90 212 317 49 [email protected]
UNITED KINGDOMArcelorMittal Long UK Ltd3rd Floor, Fore 2,Huskkisson Way, ShirleySolihull B90 4SSUnited KingdomTel. : +44 121 713 66 00Fax: +44 121 733 12 [email protected]
24
ArcelorMittal Europe - Long Products Sections and Merchant Bars
66, rue de LuxembourgL-4221 Esch-sur-AlzetteLUXEMBOURGTel +352 5313 3010Fax +352 5313 2799
http://sections.arcelormittal.com/
Vers
ion
2
